I-ToolkitRC MC8 Isihloli Sebhethri esineManuwali Yomsebenzisi Yokubonisa I-LCD

Isandulelo

Siyabonga ngokuthenga i-MC8 yokuhlola okuningi. Sicela ufunde leli bhukwana ngokucophelela ngaphambi kokusebenzisa idivayisi.

Izithonjana ezenziwe ngezandla

• Ithiphu
• Okubalulekile
• I-Nomenclature

Ulwazi Olwengeziwe

Ukuze uthole ulwazi olwengeziwe oluphathelene nokusebenza nokunakekelwa kocingo lwakho, sicela uvakashele isixhumanisi esilandelayo: www.toolkitrc.com/mc8

Izinyathelo zokuphepha

1. Umthamo wokusebenzatagI-e ye-MC8 iphakathi kuka-DC 7.0V no-35.0V. Qinisekisa ukuthi i-polarity yomthombo wamandla ayihlehliswanga ngaphambi kokusetshenziswa.
2. Ungasebenzi ngaphansi kokushisa okukhulu, umswakama, indawo evuthayo neziqhumane.
3. Ungalokothi uhambe ungagadiwe uma usebenza.
4. Nqamula umthombo wamandla uma ungasebenzi

Umkhiqizo uphelileview

I-MC8 iwukuhlola okuningi okuhlangene okwenzelwe wonke umuntu othanda ukuzilibazisa. Ifaka isibonisi esikhanyayo, esinemibala ye-IPS, inembile ukuya ku-5mV

• Ilinganisa futhi ibhalansise amabhethri e-LiPo, i-LiHV, i-LiFe neBhubesi.
• Ivolumu ebanzitage okokufaka DC 7.0-35.0V.
• Isekela okokufaka kwamandla embobo Eyinhloko/Ibhalansi/Isiginali.
• Izilinganiso kanye nemiphumela PWM, PPM, SBUS amasignali.
• USB-A, USB-C Dual-port okukhiphayo.
• Ukushaja okusheshayo kwe-USB-C 20W PD.
• Ukuvikela ukuchithwa kwebhethri ngokweqile. Ikhubaza ngokuzenzakalela okukhiphayo kwe-USB lapho ibhethri lifinyelela amazinga abalulekile.
• Ukunemba kokulinganisa nebhalansi: <0.005V.
• Ibhalansi yamanje: 60mA.
• 2.0 intshi, IPS igcwele viewisibonisi se-angle.
• Ukulungiswa okuphezulu 320 * 240 pixels.

Isakhiwo

Ngaphambili

Ngemuva

Ukusetshenziswa kokuqala

1. Xhuma ibhethri embobeni yebhalansi ye-MC8, noma xhuma i-7.0-35.0V voltage embotsheni yokufaka ye-XT60 ye-MC8.
2. Isikrini sibonisa uphawu lokuqalisa imizuzwana engu-0.5
3. Ngemuva kokuthi ukuqalisa sekuqediwe, isikrini singena ku-interface enkulu futhi sibonisa kanje:
   
4. Vula irola ukuze uskrole phakathi kwamamenyu nezinketho.
5. Cindezela okufushane noma okude irola ukuze ufake into
6. Sebenzisa isilayidi sokukhiphayo ukulungisa okukhiphayo kwesiteshi.

I-scroller isebenza ngendlela ehlukile ezintweni ezihlukene zemenyu, sicela ubhekisele kule miyalo elandelayo.

Voltage test

Voltagi-e display kanye nebhalansi (amaseli angawodwana)

Xhuma imbobo yebhalansi yebhethri ku-MC8. Ngemva kokuthi idivayisi ivuliwe, ikhasi elikhulu libonisa ivolumutage yeseli ngalinye- njengoba kuboniswe ngezansi:

Amabha anombala akhombisa ivolumutage yebhethri ngokwezithombe. Iseli elinevolumu ephezulu kakhulutagu-e uboniswa ngokubomvu, kuyilapho iseli enevolumu ephansi kakhulutagu-e uboniswa ngoluhlaza okwesibhakabhaka. Ingqikithi yevolumutage kanye voltage umehluko (ivolumu ephezulu kakhulutagi-e-low voltage) kuboniswe ngezansi.

Kumenyu enkulu, cindezela [isondo] ukuze uqale umsebenzi webhalansi. I-MC8 isebenzisa ukumelana nangaphakathi ukuze ikhiphe i(ama)seli kuze kube iphakethe lifinyelela kuvolumu efanayotage phakathi kwamaseli (<0.005V umehluko)

1. Imigoqo ilinganiselwe kuma-LiPO, ayilungile kumabhethri anamanye amakhemikhali.
2. Ngemva kokulinganisa iphakethe lebhethri, khipha ibhethri ku-MC8 ukuze uvimbele ukushajwa ngokweqile

Isamba sephakethe lebhethritage

Xhuma umthofu webhethri embobeni enkulu ye-XT60 ku-MC8 ukuze ubonise ivolumu epheleletage yebhethri, njengoba kukhonjisiwe ngezansi.

1. I-MC8 ibonisa ivolumu epheleletage yawo wonke amakhemistri webhethri asebenza ngaphakathi kwemikhawulo yokufaka.

Isilinganiso sesiginali 

Isilinganiso sesignali ye-PWM

Ngemva kokuthi idivayisi ivuliwe, skrola kwesokudla kanye kurola yensimbi ukuze ufake Imodi Yokulinganisa. Ikhasi liboniswa kanje.

Incazelo ye-UI
I-PWM: Uhlobo lwesignali
1500: Okwamanje Ububanzi bokushaya kwe-PWM
20ms/5Hz : Umjikelezo wamanje kanye nemvamisa yesiginali ye-PWM

1. Uma usebenzisa umsebenzi wokulinganisa isignali. Imbobo yesignali, imbobo yebhalansi, kanye nembobo yokufaka eyinhloko konke kunganikeza amandla ku-MC8

Isilinganiso sesignali se-PPM

Ngaphansi kwemodi yokulinganisa isignali ye-PWM, cindezela phansi kusikroli bese uskrola kwesokudla kuze kuvele i-PPM. Khona-ke isignali ye-PPM ingalinganiswa, njengoba kuboniswe ngezansi.

Isilinganiso sesiginali ye-SBUS

Ngaphansi kwemodi yokulinganisa isignali ye-PWM, cindezela phansi kusikroli bese uskrola kwesokudla kuze kuboniswe i-SBUS. Khona-ke isignali ye-SBUS ingalinganiswa, njengoba kuboniswe ngezansi.

Okukhipha isignali

Okukhiphayo kwesignali ye-PWM

Njengoba i-MC8 ivuliwe, skrola kwesokudla kabili kurola ukuze ungene kumodi yokuphumayo. Cindezela phansi kuskrola imizuzwana emi-2 ukuze ufake imodi yokuphuma kwesiginali, njengoba kukhonjisiwe ngezansi. Incazelo ye-UI

Imodi: Imodi yokuphuma kwesignali- ingashintshwa phakathi kwezindlela ezizenzakalelayo nezingu-3 zesivinini esihlukile.

Ububanzi : PWM isignali okukhipha ishayela ububanzi, ububanzi umkhawulo 1000us-2000us. Uma kusethelwe kumanuwali, cindezela isilayida esiphumayo sesiteshi ukuze uguqule ububanzi besiginali yokuphumayo. Uma isethelwe ku-othomathikhi, ububanzi besiginali buzokhula noma bunciphe ngokuzenzakalelayo.

Umjikelezo : Umjikelezo wokuphuma kwesiginali ye-PWM. Ibanga lingalungiseka phakathi kuka-1ms-50ms.

1. Uma umjikelezo usethelwe ngaphansi kuka-2ms, ububanzi obukhulu ngeke budlule inani lomjikelezo.
2. Isilayida esiphumayo sesiteshi sivikelekile ngokuphepha. Ngeke kube khona okukhiphayo kwesignali kuze kube yilapho isilayidi sibuyiselwa endaweni yaso encane kuqala.

Okukhiphayo kwesignali ye-PPM

Kusuka ekhasini lokuphuma kwe-PWM, cindezela kafushane ku-PWM ukuze ushintshe uhlobo lokuphumayo; skrolela kwesokudla kuze kuvele i-PPM. Cindezela isikhashana ukuze uqinisekise ukukhetha kwe-PPM, njengoba kukhonjisiwe ngezansi:

Ekhasini lokuphumayo le-PPM, cindezela phansi kurola imizuzwana emi-2 ukuze usethe inani eliphumayo lesiteshi ngasinye.

1. Isiteshi se-throttle singalawulwa kuphela kusetshenziswa isignali evela kusilayida esiphumayo; inani alikwazi ukushintshwa kusetshenziswa i-roller ngezizathu zokuphepha.
2. Qinisekisa ukuthi isilayidi esiphumayo sisendaweni yaso ephansi kakhulu ngaphambi kokwenza noma yiziphi izivivinyo.

Okukhipha isignali ye-SBUS

Kusuka ekhasini lokuphuma kwe-PWM, cindezela kafushane ku-PWM ukuze ushintshe uhlobo lokuphumayo; skrolela kwesokudla kuze kuvele i-SBUS. Cindezela isikhashana ukuze uqinisekise ukukhetha kwe-SBUS, njengoba kukhonjisiwe ngezansi:

Ekhasini lokuphumayo le-SBUS, cindezela phansi kurola imizuzwana emi-2 ukuze usethe inani eliphumayo lesiteshi ngasinye.

1. Uma umjikelezo usethelwe ngaphansi kuka-2ms, ububanzi obukhulu ngeke budlule inani lomjikelezo.
2. Isilayida esiphumayo sesiteshi sivikelekile ngokuphepha. Ngeke kube khona okukhiphayo kwesignali kuze kube yilapho isilayidi sibuyiselwa endaweni yaso encane kuqala.

Ukushaja i-USB

Izimbobo ze-USB ezakhelwe ngaphakathi zivumela umsebenzisi ukuthi ashaje amadivayisi eselula ekuhambeni. Imbobo ye-USB-A ihlinzeka nge-5V 1A kuyilapho imbobo ye-USB-C inikeza ukushaja okusheshayo okungu-20W, kusetshenziswa imigomo elandelayo: PD3.0,QC3.0,AFC,SCP,FCP njll.

Cindezela bese ubamba [Isondo] imizuzwana emi-2 ukuze ufake imenyu yokuhlela, ungasetha i-USB cutoff voltage. Uma ibhethri liphuma lidlule inani elibekiwe, i-MC8 izokhubaza kokubili okukhiphayo kwe-USB-A ne-USB-C; i-buzzer izophinde inikeze ithoni enwetshiwe, ekhombisa umthamo wokuvikelatage ifinyelelwe.

Setha

Emqulwinitage esibonakalayo, cindezela futhi ubambe [isondo] ukuze ufake izilungiselelo zesistimu, njengoba kukhonjisiwe esithombeni esingezansi:

Incazelo:

Ukuphepha voltage: Lapho ibhethri voltagu-e ungaphansi kwaleli nani, okukhiphayo kwe-USB kuzovalwa.
Ukukhanya kwangemuva: bonisa isilungiselelo sokukhanya, ungasetha u-1-10 .
Ibhaza: Umsindo osheshayo wokusebenza, amathoni angu-7 angasethwa noma acishwe.
Ulimi: Ulimi lwesistimu, izilimi zokubonisa ezingu-10 zingakhethwa.
Isitayela setimu: isitayela sokubonisa, ungasetha izingqikithi ezikhanyayo nezimnyama.
Okuzenzakalelayo: Buyisela kusilungiselelo sasekuqaleni.
Emuva: Buyela ku-voltage test interface.
I-ID: Inombolo ye-ID ehlukile yomshini.

Ukulinganisa

Cindezela futhi ubambe irola ngenkathi unika amandla i-MC8 ukuze ufake imodi yokulinganisa, njengoba kukhonjisiwe ngezansi:

Linganisa ivolumutage yephakethe lebhethri elishajwe ngokugcwele kusetshenziswa i-multimeter. Sebenzisa irola ukuze ukhethe Okokufaka, bese uskrola kuze kube yilapho inani lifana nalokho okukalwe ku-multimeter. Skrolela phansi ukuze ulondoloze bese ucindezela phansi kurola ukuze ulondoloze. Phinda le nqubo ngeseli ngalinye uma kudingeka. Uma usuqedile, skrolela kunketho yokuphuma bese ucindezela phansi kwirola ukuze uqedele ukulinganisa.

Okokufaka: Voltagkulinganiswa ethekwini elikhulu le-XT60.
1-8: Voltage yeseli ngalinye.
I-ADC: Inani langempela lenketho ekhethiwe ngaphambi kwe-calib
Phuma: Phuma kumodi yokulinganisa
Londoloza: Londoloza idatha yokulinganisa
Okuzenzakalelayo.: Buyela kuzilungiselelo ezizenzakalelayo

1. Sebenzisa kuphela ama-multimeter anonemba okungu-0.001V ukuze wenze ukulinganisa. Uma i-multimeter ingalungile ngokwanele, ungalinganisi.

Imininingwane

Okujwayelekile	Imbobo yokufaka eyinhloko	I-XT60 7.0V-35.0V
	Ibhalansi yokufaka	0.5V-5.0V Lit 2-85
	Okokufaka kwembobo yesiginali	<6.0V
	Ibhalansi yamanje	MAX 60mA 02-85
	Ibhalansi ukunemba	<0.005V 0 4.2V
	Okukhiphayo kwe-USB-A	5.0V@1.0A ukuthuthukiswa kwe-firmware
	Okukhiphayo kwe-USB-C	5.0V-12.0V @MAX 20W
	Iphrothokholi ye-USB-C	PD3.0 QC3.0 AFC SCP FCP
Kala ingqondo	I-PWM	500-2500us 020-400Hz
	I-PPM	880-2200uss8CH @20-50Hz
	I-SBUS	880-2200us * 16CH @20-100Hz
Okukhiphayo	I-PWM	1000-2000us @20-1000Hz
	I-PPM	880-2200us*8CH @50Hz
	I-SBUS	880-2200us *16CH @74Hz
Umkhiqizo	Usayizi	68mm*50mm*15mm
	Isisindo	50g
Iphakheji	Usayizi	76mm*60mm*30mm
	Isisindo	1009
I-LCD		IPS 2.0 intshi 240°240 isixazululo

 

Amadokhumenti / Izinsiza

I-ToolkitRC MC8 Isihloli Sebhethri esinesibonisi se-LCD [pdf] Imaniwali yosebenzisayo I-MC8, Isihloli Sebhethri esinesibonisi se-LCD, Isihloli Sebhethri se-MC8 esinesibonisi se-LCD

Izithenjwa

• Imaniwali yosebenzisayo