ToolkitRC MC8 Battery Checker with LCD Display User Manual

Lus qhuab ntuas

Ua tsaug rau kev yuav MC8 multi-checker. Thov nyeem phau ntawv no ua tib zoo ua ntej ua haujlwm ntawm lub cuab yeej.

Phau ntawv icons

• Tswv yim
• Tseem ceeb
• Nomenclature

Cov ntaub ntawv ntxiv

Yog xav paub ntxiv txog kev ua haujlwm thiab kev saib xyuas koj lub cuab yeej, thov mus saib ntawm qhov txuas hauv qab no: www.toolkitrc.com/mc8

Kev ceev faj txog kev nyab xeeb

1. Kev ua haujlwm voltage ntawm MC8 yog nruab nrab ntawm DC 7.0V thiab 35.0V. Xyuas kom lub polarity ntawm lub hwj chim qhov chaw tsis thim rov qab ua ntej siv.
2. Tsis txhob ua haujlwm nyob rau hauv huab cua kub, av noo, nplaim taws thiab tawg ib puag ncig.
3. Tsis txhob tso tseg thaum ua haujlwm.
4. Disconnect lub hwj chim qhov chaw thaum tsis siv

Khoom dhau lawmview

MC8 yog ib qho kev sib cog lus ntau tus kws kuaj xyuas tsim los rau txhua tus neeg nyiam ua haujlwm. Featuring lub ci, xim IPS zaub, nws yog 5mV

• Ntsuas thiab sib npaug LiPo, LiHV, LiFe thiab Lion roj teeb.
• Dav davtagCov tswv yim DC 7.0-35.0V
• Txhawb Main/Balance/Signal port power inputs.
• Measures thiab outputs PWM, PPM, SBUS signals.
• USB-A, USB-C dual-port tso zis.
• USB-C 20W PD ceev ceev tso zis.
• Kev tiv thaiv roj teeb tshaj tawm. Tsis siv neeg tso zis USB thaum lub roj teeb mus txog qib tseem ceeb.
• Kev ntsuas thiab ntsuas qhov tseeb: <0.005V.
• Ntsuas tam sim no: 60mA.
• 2.0 nti, IPS puv viewnyob rau hauv lub kaum sab xis zaub.
• Kev daws teeb meem siab 320 * 240 pixels.

Layout

Pem hauv ntej

Qab

Thawj siv

1. Txuas lub roj teeb rau MC8 qhov chaw nres nkoj sib npaug, lossis txuas 7.0-35.0V voltage mus rau XT60 input chaw nres nkoj ntawm MC8.
2. Qhov screen qhia lub logo khau raj rau 0.5 vib nas this
3. Tom qab khau raj ua tiav, lub vijtsam nkag mus rau lub ntsiab interface thiab qhia raws li hauv qab no:
   
4. Tig tus menyuam mus scroll ntawm cov ntawv qhia zaub mov thiab cov kev xaiv.
5. Luv luv los yog ntev nias tus menyuam nkag mus rau yam khoom
6. Siv cov zis slider los kho cov zis channel.

Lub scroller ua haujlwm sib txawv rau cov khoom noj sib txawv, thov saib cov lus qhia hauv qab no.

Voltagua test

Voltage tso saib thiab sib npaug (ib leeg hlwb)

Txuas qhov chaw nres nkoj ntawm lub roj teeb mus rau MC8. Tom qab lub tshuab hluav taws xob qhib, nplooj ntawv tseem ceeb qhia txog voltage ntawm txhua tus neeg ntawm tes- raws li qhia hauv qab no:

Cov xim muaj xim qhia cov voltage ntawm lub roj teeb graphically. Cell nrog lub siab tshaj plaws voltage tshwm nyob rau hauv liab, thaum lub cell nrog qis tshaj voltage yog tshwm nyob rau hauv xiav. Total voltage thiab voltage txawv (siab tshaj voltage-qis voltage) qhia hauv qab no.

Ntawm cov ntawv qhia zaub mov tseem ceeb, nias lub [lub log] kom pib qhov kev tshuav nyiaj li cas. Lub MC8 siv cov resistors sab hauv los tawm ntawm lub xovtooj mus txog thaum lub pob nce mus txog qhov sib xwstage ntawm cov hlwb (<0.005V txawv)

1. Cov tuav tau ntsuas rau LiPOs, nws tsis yog rau cov roj teeb nrog rau lwm cov chemistry.
2. Tom qab ntsuas lub roj teeb pob, tshem tawm lub roj teeb ntawm MC8 kom tsis txhob tso tawm ntau dhau

Roj teeb pob tag nrho voltage

Txuas lub roj teeb coj mus rau lub ntsiab XT60 chaw nres nkoj ntawm MC8 los tso saib tag nrho cov voltage ntawm lub roj teeb pob, raws li qhia hauv qab no.

1. MC8 qhia tag nrho voltage ntawm tag nrho cov roj teeb chemisries ua hauj lwm nyob rau hauv lub input txwv.

Kev ntsuas teeb liab 

PWM Signal Measurement

Tom qab lub tshuab hluav taws xob qhib, scroll sab xis ib zaug ntawm cov menyuam hlau kom nkag mus ntsuas hom. Nplooj ntawv yog tso tawm raws li nram no.

UI piav qhia
PWM: Hom teeb liab
1500: Tam sim no PWM pulse width
20ms / 5 Hz : Lub voj voog tam sim no thiab zaus ntawm PWM teeb liab

1. Thaum siv lub teeb liab ntsuas kev ua haujlwm. Lub teeb liab chaw nres nkoj, qhov chaw nres nkoj sib npaug, thiab qhov chaw nres nkoj tseem ceeb tuaj yeem muab lub zog rau MC8

PPM teeb liab ntsuas

Nyob rau hauv PWM teeb liab ntsuas hom, nias rau ntawm tus scroller thiab scroll txoj cai kom txog thaum PPM pom. Tom qab ntawd lub teeb liab PPM tuaj yeem ntsuas tau, raws li qhia hauv qab no.

SBUS Signal ntsuas

Nyob rau hauv PWM teeb liab ntsuas hom, nias rau ntawm lub scroller thiab scroll txoj cai kom txog thaum SBUS pom. Tom qab ntawd lub teeb liab SBUS tuaj yeem ntsuas tau, raws li qhia hauv qab no.

Cov zis tawm

PWM Signal output

Nrog rau MC8 powered on, scroll txoj cai ob zaug ntawm cov menyuam nkag mus rau Output hom. Nias rau ntawm lub scroller rau 2 vib nas this kom nkag mus rau lub teeb liab tso zis hom, raws li qhia hauv qab no. UI piav qhia

Qauv ： Cov teeb liab tso zis hom- tuaj yeem hloov pauv ntawm phau ntawv thiab 3 tsis siv neeg hom ntawm qhov sib txawv.

Dav ： PWM teeb liab tso zis pulse dav, ntau yam txwv 1000us-2000us. Thaum teem rau phau ntawv, thawb lub channel tso zis slider hloov cov zis teeb liab dav. Thaum teem rau tsis siv neeg, lub teeb liab dav yuav cia li nce los yog txo.

Lub voj voog : PWM signal output cycle. Ntau adjustable ntawm 1ms-50ms.

1. Thaum lub voj voog yog teem rau tsawg dua 2ms, qhov siab tshaj plaws yuav tsis pub dhau lub voj voog tus nqi.
2. Channel tso zis slider yog kev ruaj ntseg tiv thaiv. Yuav tsis muaj teeb liab tso tawm kom txog thaum lub slider rov qab mus rau nws qhov tsawg kawg nkaus ua ntej.

PPM Tawm Tawm Tawm

Los ntawm PWM tso zis page, luv nias rau PWM hloov cov zis hom; Scroll txoj cai kom txog thaum PPM tshwm. Xovxwm luv kom paub meej tias PPM xaiv, raws li qhia hauv qab no:

Hauv nplooj ntawv PPM tso tawm, nias rau ntawm cov menyuam rau 2 vib nas this los teeb tsa tus nqi tso tawm ntawm txhua qhov channel.

1. Lub throttle channel tsuas yog tswj tau siv lub teeb liab los ntawm cov zis slider; tus nqi tsis tuaj yeem hloov pauv siv cov menyuam vim kev nyab xeeb.
2. Xyuas kom tseeb tias qhov tso zis slider nyob ntawm nws qhov qis tshaj plaws ua ntej ua qhov kev xeem.

SBUS teeb liab tso zis

Los ntawm PWM tso zis page, luv nias rau PWM hloov cov zis hom; scroll sab xis kom txog thaum SBUS tshwm. Nyem luv kom paub meej tias SBUS xaiv, raws li qhia hauv qab no:

Hauv nplooj ntawv SBUS tso zis, nias rau ntawm cov menyuam rau 2 vib nas this los teeb tsa tus nqi tso tawm ntawm txhua qhov channel.

1. Thaum lub voj voog yog teem rau tsawg dua 2ms, qhov siab tshaj plaws yuav tsis pub dhau lub voj voog tus nqi.
2. Channel tso zis slider yog kev ruaj ntseg tiv thaiv. Yuav tsis muaj teeb liab tso tawm kom txog thaum lub slider rov qab mus rau nws qhov tsawg kawg nkaus ua ntej.

USB them nyiaj

Built-in USB ports tso cai rau tus neeg siv kom them cov khoom siv mobile ntawm kev mus. USB-A chaw nres nkoj muab 5V 1A thaum lub USB-C chaw nres nkoj muab 20W them ceev, siv cov kev cai hauv qab no: PD3.0, QC3.0, AFC, SCP, FCP thiab lwm yam.

Nias thiab tuav [Lheel] 2 vib nas this kom nkag mus rau cov ntawv qhia zaub mov, koj tuaj yeem teeb lub USB txiav tawm voltage. Thaum lub roj teeb tso tawm dhau los ntawm tus nqi teev, MC8 yuav lov tes taw USB-A thiab USB-C tso zis; lub buzzer tseem yuav muab lub suab txuas ntxiv, qhia txog kev tiv thaiv voltage tau mus txog.

Teeb tsa

Nyob rau voltage interface, nias thiab tuav [lub log] nkag mus rau qhov system nqis, raws li qhia hauv daim duab hauv qab no:

Nqe lus piav qhia:

Kev nyab xeeb voltage: Thaum lub roj teeb voltage yog qis dua tus nqi no, cov zis USB yuav raug muab tua.
Backlight: tso saib brightness teeb, koj tuaj yeem teeb 1-10 .
Buzzer: Lub suab nrov ua haujlwm, 7 lub suab tuaj yeem teeb lossis muab tua.
Lus: System lus, 10 hom lus tuaj yeem xaiv.
Ntsiab lus style: tso saib style, koj tuaj yeem teeb cov ntsiab lus ci thiab tsaus.
Default: Rov qab mus rau lub Hoobkas teeb tsa.
Rov qab: Rov qab mus rau voltage test interface.
ID: Lub cim ID ntawm lub tshuab.

Calibration

Nias thiab tuav cov menyuam thaum lub zog ntawm MC8 kom nkag mus rau hom calibration, raws li qhia hauv qab no:

Ntsuas qhov voltage ntawm ib lub roj teeb uas tau them tag nrho uas siv lub multimeter. Siv cov menyuam los xaiv cov tswv yim, ces scroll kom txog thaum tus nqi sib tw uas tau ntsuas ntawm lub multimeter. Scroll cia kom txuag thiab nias rau ntawm tus menyuam kom txuag. Rov ua cov txheej txheem no rau txhua tus ntawm tes yog tias xav tau. Thaum ua tiav, scroll rau qhov kev xaiv tawm thiab nias rau ntawm tus menyuam kom tiav qhov calibration.

Tswv yim: Voltage ntsuas ntawm qhov chaw nres nkoj loj XT60.
1-8: Voltage ntawm txhua tus ntawm tes.
ADCs: Thawj tus nqi ntawm qhov kev xaiv xaiv ua ntej calib
Tawm: Tawm ntawm calibration hom
Txuag: Txuag cov ntaub ntawv calibration
Default.: Rov qab mus rau qhov chaw pib

1. Tsuas yog siv multimeters nrog 0.001V raug los ua calibrations. Yog hais tias lub multimeter tsis raug txaus, tsis txhob ua calibration.

Specifications

General	Main input chaw nres nkoj	Tom ntej: XT60 7.0V-35.0V
	Ntsuas cov tswv yim	0.5V-5.0V Lit 2-85
	Lub teeb liab port input	<6.0V
	Ntsuas tam sim no	MAX 60mA 02-85
	Tshuav qhov tseeb	0.005V 0 4.2V
	USB-A tso zis	5.0V@1.0A firmware hloov tshiab
	USB-C tso zis	5.0V-12.0V @ MAX 20W
	USB-C raws tu qauv	PD3.0 QC3.0 AFC SCP FCP
Ntsuas lus	PWM	500-2500us 020-400Hz
	PPM	880-2200uss8CH @20-50Hz
	SBUS	880-2200us * 16CH @20-100Hz
Tso zis	PWM	1000-2000us @ 20-1000Hz
	PPM	880-2200us * 8CH @ 50Hz
	SBUS	880-2200us * 16CH @ 74Hz
Khoom	Loj	68mm * 50mm * 15 hli
	Qhov hnyav	50 g
Pob	Loj	76mm * 60mm * 30 hli
	Qhov hnyav	1009
LCD		IPS 2.0 nti 240 ° 240 daws teeb meem

 

Cov ntaub ntawv / Cov ntaub ntawv

ToolkitRC MC8 Battery Checker nrog LCD Zaub [ua pdf] Tus neeg siv phau ntawv MC8, Roj teeb Checker nrog LCD zaub, MC8 Roj teeb Checker nrog LCD zaub

Cov ntaub ntawv

• Cov neeg siv phau ntawv