I-microsonic pico+15-TF-I Inzwa ye-Ultrasonic enomphumela owodwa we-Analogue
Ulwazi Lomkhiqizo
Inzwa ye-Ultrasonic enomphumela owodwa we-Analogue
Inzwa ye-Ultrasonic ene-One Analogue Output itholakala ngamamodeli amane ahlukene: pico+15/TF/I, pico+25/TF/I, pico+35/TF/I, kanye ne-pico+100/TF/I. Ukwengeza, kukhona ezinye izinhlobo ezine ezinemininingwane ehlukene: pico+15/TF/U, pico+25/TF/U, pico+35/TF/U, ne-pico+100/TF/U. Inzwa isetshenziselwa ukutholwa okungaxhunywanga kwezinto futhi inendawo eyimpumputhe engu-20mm enebanga lokusebenza elingu-150mm kuya ku-250mm kuye ngemodeli. Imvamisa ye-transducer ingu-380kHz futhi ukulungiswa kungu-0.069mm. Umsebenzi wephinikhodi wepulaki yenzwa uboniswa kuMfanekiso 1.
Idatha Yezobuchwepheshe
| Imodeli | Indawo eyimpumputhe | Ibanga Lokusebenza | Ibanga eliphezulu | I-Transducer Frequency | Isixazululo |
|---|---|---|---|---|---|
| isithombe+15 | 20 mm | 150 mm | 250 mm | 380kHz | 0.069 mm |
| isithombe+25 | 20 mm | 350 mm | 250 mm | bona indawo yokuthola | 0.069 kuya ku-0.10 mm |
| isithombe+35 | 20 mm | bona indawo yokuthola | bona indawo yokuthola | 320kHz | 0.069 kuya ku-0.10 mm |
| isithombe+100 | 20 mm | 0.4m | 0m kuya ku-4m (owokuqala 5mm akunconywa ukukhwezwa) | 320kHz | 0.069 kuya ku-0.10 mm |
Imiyalo yokusetshenziswa komkhiqizo
- Funda imanuwali yokusebenza ngaphambi kokuqala.
- Ukuxhuma, ukufakwa, nokulungiswa kungenziwa kuphela ngabasebenzi abaqeqeshiwe.
- Ayikho ingxenye yokuphepha ngokuhambisana ne-EU Machine Directive, ukusetshenziswa endaweni yokuvikelwa komuntu siqu neyomshini okungavunyelwe.
- Sebenzisa ngenjongo ehlosiwe kuphela.
- Ku-pico+100/TF, ungayisebenzisi ukukhweza u-5mm wokuqala wentambo ye-M22 ohlangothini lwesiguquli.
- Setha amapharamitha wezinzwa usebenzisa inqubo yokufundisa usebenzisa Umdwebo 1:
- Setha okukhiphayo kwe-analog ngokubeka into endaweni 1 futhi uxhume i-Com cishe 3s ukuya +UB kuze kube yilapho womabili ama-LED akhanyisa kanyekanye.
- Setha imikhawulo yewindi ngokubeka into endaweni yesi-2 bese uxhuma i-Com cishe ngo-1s ukuya ku-+UB, bese uxhuma i-Com cishe ngama-13s ukuya ku-+UB kuze kube yilapho womabili ama-LED akhanyisa ngokushintshana.
- Setha ijika lesici elikhuphukayo/eliwayo ngokuxhuma i-Com cishe u-1s ukuya ku-+UB.
- Ukuze ushintshe izici zokuphumayo, xhuma i-Com cishe ngo-1s ukuya ku-+UB.
- Setha kabusha kusilungiselelo sasekuqaleni ngokuvala ukunikezwa kwamandla, bese uvula amandla kuze kube yilapho womabili ama-LED akhanyisa kanyekanye. I-LED eluhlaza ikhombisa i-Teach-in ne-Yellow LED ikhombisa Ukuvumelanisa.
- Izinzwa zomndeni wakwa-Pico+ zinendawo eyimpumputhe. Ngaphakathi kwale zoni, ukukalwa kwebanga akunakwenzeka.
- Ngaso sonke isikhathi lapho ukunikezwa kwamandla kuvuliwe, inzwa ithola izinga lokushisa layo langempela lokusebenza futhi ilidlulisele esinxephezelweni sezinga lokushisa langaphakathi. Inani elilungisiwe lithathwa ngemva kwamasekhondi angu-120.
- Kumodi evamile yokusebenza, i-LED ephuzi ekhanyayo ikhombisa ukuthi into ingaphakathi kwemikhawulo yewindi elungisiwe.
Imanuwali Yokusebenza
Inzwa ye-Ultrasonic enomphumela owodwa we-analog
- pico+15/TF/I
- pico+15/TF/U
- pico+25/TF/I
- pico+25/TF/U
- pico+35/TF/I
- pico+35/TF/U
- pico+100/TF/I
- pico+100/TF/U
Incazelo Yomkhiqizo
Inzwa ye-pico+ inikezela ngesilinganiso esingathinteki sebanga ukuya entweni okufanele ibe khona ngaphakathi kwendawo yokuthola inzwa. Kuye ngemikhawulo yewindi lezilungiselelo, isignali ye-analog yebanga-ngokulingana iyaphuma. I-ultrasonic transducer surface yezinzwa ze-pico+ ifakwe ifilimu ye-PTFE. I-transducer ngokwayo ivalwe ngokumelene nendlu ngendandatho ehlangene. Lokhu kwakheka kuvumela ukulinganiswa kufikela ku-0,5 bar overpressure. Imikhawulo yewindi yokuphumayo kwe-analog kanye nesici sayo singalungiswa ngenqubo yokufundisa ukungena. Ama-LED amabili akhombisa ukusebenza kanye nesimo sokuphuma kwe-analog.
Imiyalo yokuphepha
- Funda imanuwali yokusebenza ngaphambi kokuqala.
- Ukuxhuma, ukufakwa, nokulungiswa kungenziwa kuphela ngabasebenzi abaqeqeshiwe.
- Ayikho ingxenye yokuphepha ngokuhambisana ne-EU Machine Directive, ukusetshenziswa endaweni yokuvikelwa komuntu siqu neyomshini okungavunyelwe.
Sebenzisa ngenjongo ehlosiwe kuphela
Izinzwa ze-pico+ ultrasonic zisetshenziselwa ukutholwa kwezinto okungathintwa.
Ukufakwa
- Faka inzwa endaweni yokufaka. Ku-pico+100/TF, sincoma ukuthi singasetshenziselwe ukukhweza u-5 mm wokuqala wentambo ye-M22 ohlangothini lwe-transducer.
- Xhuma ikhebuli yokuxhuma kupulaki yedivayisi ye-M12, bona i-Fig. 1.
|
|
 |
umbala |
| 1 | +UB | nsundu |
| 3 | -UB | eluhlaza okwesibhakabhaka |
| 4 | – | mnyama |
| 2 | I/U | mhlophe |
| 5 | Com | impunga |
Phina umsebenzi nge view kupulaki yenzwa kanye nokufakwa kwekhodi kombala kwezintambo zokuxhuma ezincane kakhulu
Qalisa
- Xhuma ugesi.
- Yenza ukulungiswa kwezinzwa ngokuhambisana nomdwebo 1.
Isilungiselelo sasefekthri
- Ijika lesici se-analogi elikhuphukayo phakathi kwendawo eyimpumputhe nobubanzi bokusebenza.
- Okokufaka okusebenzayo okuningi »Com« kusethelwe kokuthi »Fundisa ukungena«.
Ukuvumelanisa
Uma ibanga lomhlangano liwela ngaphansi kwamanani aboniswe ku-Fig. 2, ukuvumelanisa kwangaphakathi kufanele kusetshenziswe. Ngale njongo setha okukhiphayo okushintshiwe kwazo zonke izinzwa ngokuvumelana nomdwebo 1 ekuqaleni. Bese usetha okukhiphayo okunemisebenzi eminingi «Com« kuya ku-»ukuvumelanisa« (bona «Ezinye izilungiselelo«, Umdwebo 1). Ekugcineni, xhuma iphinikhodi 5 yepulaki yezinzwa yazo zonke izinzwa.
Isondlo
izinzwa ezincane azinakekeli. Esimeni sokungcola okufakwe amakhekhe amaningi, sincoma ukuhlanza indawo yenzwa emhlophe.
 |
 |
|
| Pico+15... | ³0.25 m | ³1.30 m |
| Pico+25... | ³0.35 m | ³2.50 m |
| Pico+35... | ³0.40 m | ³2.50 m |
| Pico+100... | ³0.70 m | ³4.00 m |
Amabanga womhlangano.
Amanothi
- Izinzwa zomndeni wakwa-Pico+ zinendawo eyimpumputhe. Ngaphakathi kwale zoni, ukukalwa kwebanga akunakwenzeka.
- Ngaso sonke isikhathi lapho ukunikezwa kwamandla kuvuliwe, inzwa ithola izinga lokushisa layo langempela lokusebenza futhi ilidlulisele esinxephezelweni sezinga lokushisa langaphakathi. Inani elilungisiwe lithathwa ngemva kwamasekhondi angu-120.
- Kumodi evamile yokusebenza, i-LED ephuzi ekhanyayo ikhombisa ukuthi into ingaphakathi kwemikhawulo yewindi elungisiwe.
- Uma ukuvumelanisa kwenziwe kwasebenza i-Teach-in iyacishwa (bona «Ezinye izilungiselelo«, Umdwebo 1).
- Inzwa ingasethwa kabusha kusilungiselelo sayo sefekthri (bona «Ezinye izilungiselelo«, Umdwebo 1).
- Uma uthanda zonke izilungiselelo zepharamitha ye-Teach-in nezinye ezengeziwe zingenziwa kusetshenziswa i-adaptha ye-LinkControl (insiza ozikhethela yona) kanye nesofthiwe ye-LinkControl ye-Windows©.
Setha amapharamitha enzwa usebenzisa inqubo yokufundisa ukungena
Setha okukhiphayo kwe-analog
| Setha imikhawulo yewindi | Setha ijika lesici elikhuphukayo/eliwayo | |||
| Beka into endaweni yoku-1. | ||||
| Xhuma i-Com cishe imizuzwana emi-3 ukuya ku-+UB, kuze kube yilapho womabili ama-LED akhanya kanyekanye. | Xhuma i-Com cishe imizuzwana emi-13 ukuya ku-+UB, kuze kube yilapho womabili ama-LED akhanya ngokushintshana. | |||
| Womabili ama-LED: | ukukhanya ngokunye | I-LED eluhlaza:
I-LED Ephuzi: |
ukukhanya
on: ukukhuphuka icishiwe: ijika lesici esiwayo |
|
| Beka into endaweni yoku-2. | ||||
|
Xhuma i-Com cishe isekhondi elingu-1 ukuya ku-+UB. |
Ukushintsha isici sokukhiphayo xhuma i-Com cishe isekhondi elingu-1 ukuya ku-+UB. | |||
| Linda cishe imizuzwana eyi-10. | ||||
| Imodi yokusebenza evamile | ||||
Ezinye izilungiselelo
|
Shintsha Fundisa + vumelanisa |
Setha kabusha kusilungiselelo sasekuqaleni | |||
| Vala ukunikezwa kwamandla. | Vala ukunikezwa kwamandla. | |||
| Xhuma i-Com ku-UB. | Xhuma i-Com ku-UB. | |||
| Vula ukunikezwa kwamandla. | Vula ukunikezwa kwamandla. | |||
| Gcina i-Com ixhumeke ku
-UB cishe imizuzwana emi-3, kuze kube yilapho womabili ama-LED akhanya kanyekanye. |
Gcina i-Com ixhumeke ku
-UB cishe imizuzwana eyi-13, kuze kube yiwo womabili ama-LED Ima ekhanyayo. |
|||
| I-LED eluhlaza: I-LED ephuzi: | ukukhanya | |||
| on: Fundisa | Nqamula i-Com ku-UB. | |||
| off: Vumelanisa | ||||
| Ukushintsha imodi yokusebenza xhuma i-Com cishe isekhondi elingu-1 ukuya ku-UB. | ||||
| Linda cishe imizuzwana eyi-10. | ||||
| Imodi yokusebenza evamile | ||||
Idatha yobuchwepheshe
microsonic GmbH / Phoenixseestraße 7 / 44263 Dortmund / Germany / T +49 231 975151-0 / F +49 231 975151-51 / E info@microsonic.de / W microsonic.de
Okuqukethwe kulo mbhalo kungaphansi kwezinguquko zobuchwepheshe. Imininingwane ekulo mbhalo yethulwe ngendlela echazayo kuphela. Azigunyazi noma yiziphi izici zomkhiqizo.
Amadokhumenti / Izinsiza
 |
I-microsonic pico+15-TF-I Inzwa ye-Ultrasonic enomphumela owodwa we-Analogue [pdf] Imaniwali yosebenzisayo I-pico 15-TF-I Inzwa ye-Ultrasonic Enomphumela Owodwa we-Analogue, i-pico 15-TF-I, Inzwa ye-Ultrasonic Enomphumela Owodwa we-Analogue, Okukhiphayo Okukodwa kwe-Analogue, Okukhiphayo kwe-Analogue |
