microsonic pico+15-TF-I Ultrasonic Sensor tare da Fitar Analogue ɗaya
Bayanin samfur
Sensor Ultrasonic Tare da Fitar Analogue Daya
Sensor na Ultrasonic tare da Fitar Analogue ɗaya yana samuwa a cikin nau'i daban-daban guda huɗu: pico + 15 / TF / I, pico + 25 / TF / I, pico + 35 / TF / I, da pico + 100 / TF / I. Bugu da ƙari, akwai wasu samfura guda huɗu waɗanda ke da ƙayyadaddun bayanai daban-daban: pico+15/TF/U, pico+25/TF/U, pico+35/TF/U, da pico+100/TF/U. Ana amfani da firikwensin don gano abubuwan da ba a haɗa su ba kuma yana da yankin makafi na 20mm tare da kewayon aiki na 150mm zuwa 250mm dangane da ƙirar. Mitar transducer shine 380kHz kuma ƙuduri shine 0.069mm. Ana nuna aikin fil don filogin firikwensin a hoto 1.
Bayanan Fasaha
| Samfura | Yankin Makafi | Range Aiki | Matsakaicin Rage | Mitar mai juyawa | Ƙaddamarwa |
|---|---|---|---|---|---|
| pico+15 | 20mm ku | 150mm ku | 250mm ku | 380kHz | 0.069mm ku |
| pico+25 | 20mm ku | 350mm ku | 250mm ku | duba yankin ganowa | 0.069 zuwa 0.10 mm |
| pico+35 | 20mm ku | duba yankin ganowa | duba yankin ganowa | 320kHz | 0.069 zuwa 0.10 mm |
| pico+100 | 20mm ku | 0.4m | 0m zuwa 4m (5mm na farko ba a ba da shawarar don hawa ba) | 320kHz | 0.069 zuwa 0.10 mm |
Umarnin Amfani da samfur
- Karanta littafin aiki kafin farawa.
- Ƙwararrun ma'aikata ne kawai za a iya aiwatar da haɗin kai, shigarwa, da gyare-gyare.
- Babu wani bangaren aminci daidai da umarnin Injin EU, amfani da shi a cikin yanki na kariyar na'ura da ba a yarda da shi ba.
- Yi amfani da manufar da aka yi niyya kawai.
- Don pico + 100/TF, kar a yi amfani da shi don hawan 5mm na farko na zaren M22 a gefen transducer.
- Saita sigogin firikwensin ta hanyar hanyar Koyarwa ta amfani da zane 1:
- Saita fitowar analog ta hanyar sanya abu a matsayi na 1 da haɗa Com don kusan 3s zuwa + UB har sai LEDs biyu suna walƙiya lokaci guda.
- Saita iyakoki ta taga ta sanya abu a matsayi na 2 kuma haɗa Com na kusan 1s zuwa + UB, sannan haɗa Com na kusan 13s zuwa + UB har sai LEDs biyu suna walƙiya a madadin.
- Saita yanayin yanayin fitowa mai tasowa/faɗiwa ta haɗa Com na kusan 1s zuwa +UB.
- Don canza halayen fitarwa, haɗa Com don kusan 1s zuwa + UB.
- Sake saita saitin masana'anta ta hanyar kashe wutar lantarki, sannan kunna wutar lantarki har sai LEDs biyu suna haskaka lokaci guda. Green LED yana nuna Koyarwa-in kuma Yellow LED yana nuna Aiki tare.
- Na'urori masu auna firikwensin dangin Pico+ suna da yankin makaho. A cikin wannan yanki, ma'aunin nesa ba zai yiwu ba.
- A duk lokacin da aka kunna wutar lantarki, firikwensin yana gano ainihin zafinsa na aiki kuma yana aika shi zuwa diyya na zafin jiki na ciki. Ana ɗaukar ƙimar daidaitacce bayan daƙiƙa 120.
- A cikin yanayin aiki na yau da kullun, LED mai haske mai launin rawaya yana nuna alamun cewa abu yana cikin iyakokin taga da aka gyara.
Manual aiki
Ultrasonic firikwensin tare da fitowar analog guda ɗaya
- pico+15/TF/I
- pico+15/TF/U
- pico+25/TF/I
- pico+25/TF/U
- pico+35/TF/I
- pico+35/TF/U
- pico+100/TF/I
- pico+100/TF/U
Bayanin Samfura
Firikwensin pico+ yana ba da ma'aunin mara lamba na nisa zuwa abu wanda dole ne ya kasance a cikin yankin gano firikwensin. Dangane da iyakokin taga saituna, ana fitar da siginar siginar daidaitattun nisa. Fuskar mai jujjuyawar ultrasonic na firikwensin pico+ an lullube shi da fim ɗin PTFE. Mai jujjuyawar kanta tana hatimi akan gidan ta zoben haɗin gwiwa. Wannan abun da ke ciki yana ba da izinin aunawa har zuwa mashaya sama da 0,5. Ana iya daidaita iyakokin tagar abin fitarwa na analog da halayensa ta hanyar tsarin koyarwa. LEDs guda biyu suna nuna aiki da yanayin fitowar analog.
Umarnin aminci
- Karanta littafin aiki kafin farawa.
- Ƙwararrun ma'aikata ne kawai za a iya aiwatar da haɗin kai, shigarwa, da gyare-gyare.
- Babu wani bangaren aminci daidai da umarnin Injin EU, amfani da shi a cikin yanki na kariyar na'ura da ba a yarda da shi ba
Yi amfani da manufar da aka yi niyya kawai
pico+ ultrasonic na'urori masu auna firikwensin ana amfani da su don gano abubuwan da ba a haɗa su ba.
Shigarwa
- Dutsen firikwensin a wurin dacewa. Don pico + 100/TF, muna ba da shawarar kada a yi amfani da shi don hawan 5 mm na farko na zaren M22 a gefen mai juyawa.
- Haɗa kebul na haɗi zuwa filogin na'urar M12, duba Hoto 1.
|
|
 |
launi |
| 1 | +UB | launin ruwan kasa |
| 3 | –UB | blue |
| 4 | – | baki |
| 2 | I/U | fari |
| 5 | Com | launin toka |
Pin aiki tare da view a kan filogi na firikwensin da lambar launi na igiyoyin haɗin ƙananan ƙananan
Farawa
- Haɗa wutar lantarki.
- Yi daidaitawar firikwensin daidai da zane 1.
Saitin masana'anta
- Haɓaka halayen analog mai tasowa tsakanin yankin makafi da kewayon aiki.
- Multifunctional shigarwar "Com" saita zuwa "Teach-in".
Aiki tare
Idan nisan taron ya faɗi ƙasa da ƙimar da aka nuna a siffa 2, ya kamata a yi amfani da aiki tare na ciki. Don wannan dalili saita abubuwan da aka canza na duk na'urori masu auna firikwensin daidai da zane na 1 da farko. Sa'an nan saita fitarwa multifunctional "Com" zuwa "synchronization" (duba "Ƙarin saitunan", zane na 1). A ƙarshe, haɗa fil 5 na filogin firikwensin duk na'urori masu auna firikwensin.
Kulawa
Na'urori masu auna firikwensin ba su da kulawa. Idan akwai wuce gona da iri da datti, muna ba da shawarar tsaftace farin firikwensin firikwensin.
 |
 |
|
| pico+15… | ³0.25m | ³1.30m |
| pico+25… | ³0.35m | ³2.50m |
| pico+35… | ³0.40m | ³2.50m |
| pico+100… | ³0.70m | ³4.00m |
Nisan majalisa.
Bayanan kula
- Na'urori masu auna firikwensin dangin Pico+ suna da yankin makaho. A cikin wannan yanki, ma'aunin nesa ba zai yiwu ba.
- A duk lokacin da aka kunna wutar lantarki, firikwensin yana gano ainihin zafinsa na aiki kuma yana aika shi zuwa diyya na zafin jiki na ciki. Ana ɗaukar ƙimar daidaitacce bayan daƙiƙa 120.
- A cikin yanayin aiki na yau da kullun, LED mai haske mai launin rawaya yana nuna alamar abu yana cikin iyakokin taga da aka gyara.
- Idan an kunna aiki tare ana kashe Koyarwa (duba "Ƙarin saituna", zane 1).
- Ana iya sake saita firikwensin zuwa saitin masana'anta (duba "Ƙarin saitunan", zane 1).
- Zabi duk Koyarwa da ƙarin saitunan ma'aunin firikwensin za a iya yin su ta amfani da adaftar LinkControl (na'urorin haɗi na zaɓi) da software na LinkControl na Windows©.
Saita sigogin firikwensin ta hanyar hanyar Koyarwa
Saita fitowar analog
| Saita iyakokin taga | Saita yanayin fitowar mai tasowa/faɗuwa | |||
| Sanya abu a matsayi na 1. | ||||
| Haɗa Com na kusan s3 zuwa +UB, har sai dukkan LEDs ɗin su yi haske lokaci guda. | Haɗa Com na kusan s13 zuwa +UB, har sai dukkan LEDs ɗin su yi haske a madadin. | |||
| LEDs guda biyu: | walƙiya a madadin | Green LED:
Rawaya LED: |
walƙiya
on: tashi kashe: faɗuwar sifa mai lankwasa |
|
| Sanya abu a matsayi na 2. | ||||
|
Haɗa Com na kusan s 1 zuwa + UB. |
Don canza yanayin fitarwa haɗa Com na kusan 1 s zuwa + UB. | |||
| Jira kusan s10. | ||||
| Yanayin aiki na al'ada | ||||
Ƙarin saituna
|
Canja koyarwa-in + daidaitawa |
Sake saitin zuwa masana'anta saitin | |||
| Kashe wutar lantarki. | Kashe wutar lantarki. | |||
| Haɗa Com zuwa -UB. | Haɗa Com zuwa -UB. | |||
| Kunna wutar lantarki. | Kunna wutar lantarki. | |||
| Ci gaba da haɗa Com zuwa
-UB na kusan 3 s, har sai LEDs biyu suna haskakawa lokaci guda. |
Ci gaba da haɗa Com zuwa
-UB na kusan 13s, har sai duka LEDs tsaya walƙiya. |
|||
| Green LED: Rawaya LED: | walƙiya | |||
| on: Koyarwa | Cire haɗin Com daga -UB. | |||
| off: daidaita | ||||
| Don canza yanayin aiki haɗa Com na kusan 1 s zuwa -UB. | ||||
| Jira kusan s10. | ||||
| Yanayin aiki na al'ada | ||||
Bayanan fasaha
microsonic GmbH / Phoenixseestraße 7 / 44263 Dortmund / Jamus / T +49 231 975151-0 / F +49 231 975151-51 / E info@microsonic.de / W microsonic.de
Abubuwan da ke cikin wannan takarda yana ƙarƙashin canje-canjen fasaha. Ana gabatar da ƙayyadaddun ƙayyadaddun bayanai a cikin wannan takaddar ta hanyar siffantawa kawai. Ba su da garantin kowane fasalin samfur.
Takardu / Albarkatu
 |
microsonic pico+15-TF-I Ultrasonic Sensor tare da Fitar Analogue ɗaya [pdf] Manual mai amfani pico 15-TF-I Ultrasonic Sensor tare da Fitar Analogue ɗaya, pico 15-TF-I, Sensor Ultrasonic tare da Fitar Analogue ɗaya, Fitowar Analogue ɗaya, Fitowar Analogue |
