microsonic pico+15-TF-I Ultrasonic Sensor ine Imwe Analogue Output

Product Information

Ultrasonic Sensor ine Imwe Analogue Output

Iyo Ultrasonic Sensor ine Imwe Analogue Output inowanikwa mumhando ina dzakasiyana: pico+15/TF/I, pico+25/TF/I, pico+35/TF/I, uye pico+100/TF/I. Pamusoro pezvo, kune mamwe mamodheru mana ane zvirevo zvakasiyana: pico+15/TF/U, pico+25/TF/U, pico+35/TF/U, uye pico+100/TF/U. Iyo sensor inoshandiswa kune isiri-yekuona kuona kwezvinhu uye ine bofu zone ye20mm ine yekushanda ye150mm kusvika 250mm zvichienderana nemuenzaniso. Iyo transducer frequency ndeye 380kHz uye resolution ndeye 0.069mm. Iyo pini yekugovewa kweiyo sensor plug inoratidzwa muMufananidzo 1.

Technical Data

Model	Blind Zone	Operating Range	Maximum Range	Transducer Frequency	Resolution
pico+15	20mm	150mm	250mm	380kHz	0.069mm
pico+25	20mm	350mm	250mm	ona nzvimbo yekuona	0.069 kusvika 0.10mm
pico+35	20mm	ona nzvimbo yekuona	ona nzvimbo yekuona	320kHz	0.069 kusvika 0.10mm
pico+100	20mm	0.4m	0m kusvika 4m (yekutanga 5mm haina kukurudzirwa kukwira)	320kHz	0.069 kusvika 0.10mm

Mirayiridzo Yekushandiswa Kwechigadzirwa

1. Verenga bhuku rekushandisa usati watanga.
2. Kubatanidza, kuisa, uye kugadzirisa zvinogona kuitwa chete nevashandi vanokwanisa.
3. Hapana chekuchengetedza chikamu zvinoenderana neEU Machine Directive, kushandiswa munzvimbo yekuzvidzivirira uye yemuchina haibvumidzwe.
4. Shandisa chinangwa chaunoda chete.
5. Kune iyo pico+100/TF, usashandise kukwirisa yekutanga 5mm yeM22 shinda padivi retransducer.
6. Seta sensor paramita kuburikidza neTeach-in maitiro uchishandisa Dhiagiramu 1:
   • Seta analog inobuda nekuisa chinhu pachinzvimbo 1 uye kubatanidza Com kweinenge 3s ku + UB kudzamara ma LED ese arikupenya panguva imwe chete.
   • Seta hwindo rinogumira nekuisa chinhu pachinzvimbo 2 uye kubatanidza Com kweinenge 1s ku +UB, wozobatanidza Com kweinenge 13s ku +UB kusvikira maLED ese ari maviri anopenya alternately.
   • Seta inosimuka/inodonha inobuda maitiro curve nekubatanidza Com kweinenge 1s ku +UB.
7. Kuti uchinje maitiro ekubuda, batanidza Com kweinenge 1s ku +UB.
8. Dzorera kugadziriro yefekitari nekudzima magetsi, wobva wabatidza magetsi kusvika ma LED ese arikupenya panguva imwe chete. Green LED inoratidza Dzidzisa-mukati uye Yero LED inoratidza Sync.
9. Masensa emhuri yePico + ane bofu. Munharaunda iyi, kuyerwa kwechinhambwe hakugoneke.
10. Pese apo magetsi anobatidzwa, sensor inoona tembiricha yayo chaiyo yekushanda uye inoendesa kune yemukati tembiricha muripo. Iko yakagadziriswa kukosha inotorwa mushure me120 seconds.
11. Mune yakajairika maitiro ekushandisa, yakavhenekerwa yero LED masaini kuti chinhu chiri mukati meyakagadziriswa hwindo miganhu.

Operating Manual

Ultrasonic sensor ine imwe analog yakabuda

• pico+15/TF/I
• pico+15/TF/U
• pico+25/TF/I
• pico+25/TF/U
• pico+35/TF/I
• pico+35/TF/U
• pico+100/TF/I
• pico+100/TF/U

Product Description

Iyo pico + sensor inopa isiri-yekubata kuyerwa kwechinhambwe kune chinhu chinofanirwa kunge chiripo mukati meiyo sensor nzvimbo yekuona. Zvichienderana nemiganhu yewindo rezvigadziro, chinhambwe-chakaenzana cheanalog chiratidzo chinobuda. Iyo ultrasonic transducer pamusoro peiyo pico + sensors ine laminated nePTFE firimu. Iyo transducer pachayo inonamwa pakatarisana neimba nemhete yakabatana. Ichi chinyorwa chinobvumira kuyerwa kusvika ku0,5 bar overpressure. Iwo mahwindo emuganho ekubuda kweanalog uye hunhu hwayo hunogona kugadziriswa kuburikidza neTeach-in maitiro. Ma LED maviri anoratidza kushanda uye mamiriro ekubuda kweanalogi.

Mirayiridzo yekuchengetedza

• Verenga bhuku rekushandisa usati watanga.
• Kubatanidza, kuisa, uye kugadzirisa zvinogona kuitwa chete nevashandi vanokwanisa.
•  Hapana chekuchengetedza chikamu zvinoenderana neEU Machine Directive, kushandiswa munzvimbo yemunhu uye kudzivirira muchina hakubvumidzwe.

Shandisa chinangwa chaunoda chete
pico + ultrasonic sensors inoshandiswa kune isiri-yekuona kuona kwezvinhu.

Installation

• Isa sensor panzvimbo yekukodzera. Kune iyo pico+100/TF, isu tinokurudzira kusashandisa kukwirisa yekutanga 5 mm yeM22 shinda padivi retransducer.
• Batanidza tambo yekubatanidza kune M12 mudziyo plug, ona Fig.

		color
1	+UB	bhurawuni
3	–UB	bhuruu
4	–	nhema
2	I/U	chena
5	Com	gireyi

Pina basa ne view pa sensor plug uye coding yemavara eiyo microscopic yekubatanidza tambo

Tanga

• Batanidza magetsi.
• Ita gadziriso ye sensor inoenderana nedhirowa 1.

Kuiswa kwefekitari

• Iyo inosimuka analogi yehunhu curve pakati penzvimbo yebofu uye yekushanda renji.
• Multifunctional input »Com« set to »Dzidzisa-in«.

Synchronization
Kana nzvimbo yegungano ichiwira pasi pezviyero zvinoratidzwa mumufananidzo 2, kubvumirana kwemukati kunofanira kushandiswa. Nekuda kweichi chinangwa isa zvakachinjika zvinobuda zveese ma sensors zvinoenderana neDiagiramu 1 pakutanga. Wobva waisa iyo yakawanda inobuda "Com« ku"kuwiriranisa« (ona »Dzimwe marongero«, Dhizaini 1). Pakupedzisira, batanidza pini 5 yemasensa plug yeese ma sensors.
Maintenance
microscopic sensors haina kugadzirisa. Kana yakawandisa caked-pane tsvina, isu tinokurudzira kuchenesa iyo chena sensor pamusoro.

pico+15...	³0.25 m	³1.30 m
pico+25...	³0.35 m	³2.50 m
pico+35...	³0.40 m	³2.50 m
pico+100...	³0.70 m	³4.00 m

Gungano kureba.

Notes

• Masensa emhuri yePico + ane bofu. Munharaunda iyi, kuyerwa kwechinhambwe hakugoneke.
• Pese apo magetsi anobatidzwa, sensor inoona tembiricha yayo chaiyo yekushanda uye inoendesa kune yemukati tembiricha muripo. Iko yakagadziriswa kukosha inotorwa mushure me120 seconds.
• Mune yakajairika maitiro ekushandisa, yakavhenekerwa yero LED masaini chinhu chiri mukati meyakagadziriswa hwindo miganhu.
• Kana kuwiriranisa kwaitwa Dzidzisa-mukati yakadzimwa (ona »Dzimwe marongero«, Dhiagiramu 1).
• Iyo sensor inogona kumisikidzwa kune yayo yekumisikidza fekitori (ona "Dzimwe marongero", Dhiagiramu 1).
• Sarudzo ese Dzidzisa-mukati uye yekuwedzera sensor parameter marongero anogona kuitwa uchishandisa iyo LinkControl adapta (optional accessory) uye iyo LinkControl software yeWindows ©.

Seta sensor paramita kuburikidza neTeach-in maitiro

Seta analog kubuda

Isa miganhu yehwindo			Seta inosimuka/inodonha inobuda maitiro curve
Isa chinhu panzvimbo 1.
Batanidza Com kwenguva ingangoita 3s kusvika +UB, kusvika maLED ese ari maviri panguva imwe chete.			Batanidza Com kwenguva ingangoita 13s kusvika +UB, kusvika maLED ese ari maviri alternately.
Ma LED ese ari maviri:	upenye neimwe nzira		Green Girazi: Yero LED:	kupenya on: kusimuka off: falling character curve
Isa chinhu panzvimbo 2.
Batanidza Com kwenguva ingangoita 1s kusvika +UB.			Kuti uchinje inobuda hunhu batanidza Com kweinenge 1 s kuenda +UB.
			Mirira kweinenge 10 s.
Normal operating mode

Mamwe marongero

Chinja Dzidzisa-mu + sync			Dzorera kugadziriro yepafekitari
Dzima magetsi.			Dzima magetsi.
Batanidza Com ku-UB.			Batanidza Com ku-UB.
Batidza magetsi.			Batidza magetsi.
Chengetedza Com yakabatana ne -UB kweinenge 3 s, kudzamara ma LED ese ari kupenya panguva imwe chete.			Chengetedza Com yakabatana ne -UB kweanenge 13 s, kusvika ese maLED stop kupenya.
Green LED: Yero LED:	kupenya
	on: Dzidzisa-mukati		Bvisa Com kubva -UB.
	off: Kubatanidza
Kuti uchinje maitiro ekushanda batanidza Com kweinenge 1 s kuenda ku -UB.
Mirira kweinenge 10 s.
Normal operating mode

Technical data

microsonic GmbH / Phoenixseestraße 7 / 44263 Dortmund / Germany / T +49 231 975151-0 / F +49 231 975151-51 / E info@microsonic.de / W microsonic.de
Zviri mugwaro rino zvinoenderana nekuchinja kwehunyanzvi. Zvinotsanangurwa mugwaro iri zvinoratidzwa nenzira inotsanangura chete. Ivo havabvumire chero zvigadzirwa zvemhando.

Zvinyorwa / Zvishandiso

microsonic pico+15-TF-I Ultrasonic Sensor ine Imwe Analogue Output [pdf] User Manual pico 15-TF-I Ultrasonic Sensor ine Imwe Analogue Output, pico 15-TF-I, Ultrasonic Sensor ine Imwe Analogue Output, Imwe Analogue Output, Analogue Output

References

• User Manual