microsonic pico+15-TF-I Ultrasonic sensọ nwere otu mmepụta ihe analog

Ozi ngwaahịa

Ihe mmetụta Ultrasonic nwere otu mmepụta Analogue

Ihe mmetụta Ultrasonic nwere otu mmepụta ihe analog dị na ụdị anọ dị iche iche: pico + 15 / TF / I, pico + 25 / TF / I, pico + 35 / TF / I, na pico + 100 / TF / I. Ọzọkwa, e nwere ụdị anọ ndị ọzọ nwere nkọwa dị iche iche: pico+15/TF/U, pico+25/TF/U, pico+35/TF/U, na pico+100/TF/U. A na-eji ihe mmetụta ahụ eme ihe maka nchọpụta na-abụghị kọntaktị nke ihe ma nwee mpaghara kpuru ìsì nke 20mm nke na-arụ ọrụ nke 150mm ruo 250mm dabere na ihe nlereanya. Ugboro transducer bụ 380kHz na mkpebi ya bụ 0.069mm. E gosipụtara ọrụ ntụtụ maka plọgụ sensọ na eserese 1.

Data teknụzụ

Nlereanya	Mpaghara kpuru ìsì	Oke arụ ọrụ	Oke kacha	Ugboro ntụgharị	Mkpebi
pikto +15	20mm	150mm	250mm	380kHz	0.069mm
pikto +25	20mm	350mm	250mm	hụ mpaghara nchọpụta	0.069 ka 0.10mm
pikto +35	20mm	hụ mpaghara nchọpụta	hụ mpaghara nchọpụta	320kHz	0.069 ka 0.10mm
pikto +100	20mm	0.4m	0m ka 4m (mbụ 5mm adịghị atụ aro maka arịọnụ)	320kHz	0.069 ka 0.10mm

Ntuziaka ojiji ngwaahịa

1. Gụọ akwụkwọ ntuziaka ọrụ tupu ịmalite.
2. Njikọ, nrụnye, na mmezi nwere ike ịme naanị ndị ọrụ ruru eru.
3. Enweghị akụrụngwa nchekwa dịka ntuziaka igwe EU siri dị, anabataghị iji na mpaghara nchekwa nkeonwe yana nke igwe.
4. Jiri naanị ebumnuche ezubere.
5. Maka pico + 100/TF, ejila ya maka ịkwanye 5mm mbụ nke eriri M22 n'akụkụ nke transducer.
6. Tọọ ihe mmetụta sensọ site na usoro nkuzi site na iji eserese 1:
   • Tọọ mmepụta analọgụ site n'itinye ihe ahụ n'ọnọdụ 1 wee jikọọ Com maka ihe dịka 3s ruo + UB ruo mgbe LED abụọ ahụ na-enwu n'otu oge.
   • Tọọ oke windo site na idowe ihe ahụ n'ọnọdụ 2 wee jikọọ Com maka ihe dịka 1s ruo + UB, wee jikọọ Com maka ihe dị ka 13s ruo + UB ruo mgbe LED abụọ ahụ na-agbanye ọzọ.
   • Tọọ ngụpụta njirimara na-ebili/ada ada site na ijikọ Com maka ihe dịka 1s ruo +UB.
7. Ka ịgbanwee njirimara mmepụta, jikọọ Com maka ihe dịka 1s ruo + UB.
8. Tọgharịa na ntọala ụlọ ọrụ site na ịgbanyụ ọkụ ọkụ, wee gbanye ọkụ ọkụ ruo mgbe LED abụọ ahụ na-enwu n'otu oge. Green LED na-egosi Nkuzi-na Ikanam edo edo na-egosi mmekọrịta.
9. Ihe mmetụta nke ezinụlọ Pico+ nwere mpaghara kpuru ìsì. N'ime mpaghara a, ọ gaghị ekwe omume nha anya.
10. Mgbe ọ bụla agbanyere ọkụ ọkụ, ihe mmetụta na-achọpụta ọnọdụ okpomọkụ ya n'ezie ma bufee ya na nkwụghachi okpomọkụ dị n'ime. A na-eweghara uru a gbanwere mgbe 120 sekọnd gachara.
11. N'ọnọdụ ọrụ nkịtị, ọkụ ọkụ na-acha odo odo na-egosi na ihe ahụ dị n'ime oke mpio emeziri.

Akwụkwọ ntuziaka eji arụ ọrụ

Ihe mmetụta Ultrasonic nwere otu mmepụta analọg

• pico+15/TF/I
• pico+15/TF/U
• pico+25/TF/I
• pico+25/TF/U
• pico+35/TF/I
• pico+35/TF/U
• pico+100/TF/I
• pico+100/TF/U

Nkọwa ngwaahịa

Ihe mmetụta pico+ na-enye nha na-abụghị kọntaktị nke anya na ihe ga-adị n'ime mpaghara nchọpụta ihe mmetụta. Dabere na oke mpio ntọala, a na-ewepụta mgbama analọgụ nha nha anya dị anya. A na-eji ihe nkiri PTFE kpuchie elu ultrasonic transducer elu nke pico + sensọ. A na-emechi transducer n'onwe ya megide ụlọ ahụ site na mgbanaka nkwonkwo. Ngwakọta a na-enye ohere ịlele ihe ruru 0,5 mmanya ngafe. Enwere ike gbanwee oke mpio nke mmepụta analọgụ na njirimara ya site na usoro nkuzi. Igwe ọkụ abụọ na-egosi ọrụ na ọnọdụ nke mmepụta analog.

Ntuziaka nchekwa

• Gụọ akwụkwọ ntuziaka ọrụ tupu ịmalite.
• Njikọ, nrụnye, na mmezi nwere ike ịme naanị ndị ọrụ ruru eru.
•  Enweghị akụrụngwa nchekwa dịka ntuziaka igwe EU siri dị, anabataghị iji na mpaghara nchekwa nkeonwe yana nke igwe

Jiri naanị ebumnuche ezubere
A na-eji pico+ ultrasonic sensọ maka ịchọpụta ihe na-abụghị kọntaktị.

Nwụnye

• Wụnye ihe mmetụta na ebe dabara adaba. Maka pico + 100/TF, anyị na-akwado ka ị ghara iji maka ịkwanye 5 mm mbụ nke eriri M22 n'akụkụ nke transducer.
• Jikọọ eriri njikọ na plọg ngwaọrụ M12, lee foto 1.

		agba
1	+UB	agba aja aja
3	–UB	acha anụnụ anụnụ
4	–	nwa
2	I/U	ọcha
5	Com	agba ntụ

Pin ọrụ ya na view na nkwụnye sensọ na koodu agba nke eriri njikọ microscopic

Malite

• Jikọọ ọkọnọ ike.
• Mee mmezi ihe mmetụta dịka eserese 1 si dị.

Ntọala ụlọ ọrụ

• Usoro njirimara analọgụ na-ebili n'etiti mpaghara kpuru ìsì na oke ọrụ.
• Ntinye multifunctional "Com" atọrọ na "Teach-in".

Mmekọrịta
Ọ bụrụ na anya mgbakọ ahụ daa n'okpuru ụkpụrụ egosiri na Fig. 2, ekwesịrị iji mmekọrịta dị n'ime. N'ihi nke a, tọọ mgbanwe mgbanwe nke niile sensọ dị ka eserese 1 na mbụ. Mgbe ahụ tọọ mmepụta multifunctional "Com" ka ọ bụrụ "mmekọrịta" (lee "Ntọala ndị ọzọ", eserese 1). N'ikpeazụ, jikọọ pin 5 nke ihe mmetụta sensọ niile.
Nlekọta
ihe mmetụta microscopic enweghị mmezi. N'ihe gbasara oke kek-na unyi, anyị na-akwado ihicha elu ihe mmetụta ọcha.

pico+15…	³0.25 m	³1.30 m
pico+25…	³0.35 m	³2.50 m
pico+35…	³0.40 m	³2.50 m
pico+100…	³0.70 m	³4.00 m

Ogologo mgbakọ.

Ihe ndetu

• Ihe mmetụta nke ezinụlọ Pico+ nwere mpaghara kpuru ìsì. N'ime mpaghara a, ọ gaghị ekwe omume nha anya.
• Mgbe ọ bụla agbanyere ọkụ ọkụ, ihe mmetụta na-achọpụta ọnọdụ okpomọkụ ya n'ezie ma bufee ya na nkwụghachi okpomọkụ dị n'ime. A na-eweghara uru a gbanwere mgbe 120 sekọnd gachara.
• N'ụdị arụ ọrụ nkịtị, ọkụ ọkụ na-acha odo odo na-egosi na ihe ahụ dị n'ime oke mpio emeziri.
• Ọ bụrụ na mmekọrịta agbanyere, nkuzi nkuzi adịghị arụ ọrụ (lee "Ntọala ọzọ", eserese 1).
• Enwere ike ịtọgharịa ihe mmetụta ahụ na ntọala ụlọ ọrụ ya (lee "Ntọala ndị ọzọ", eserese 1).
• Ọ bụrụ na ị nwere ike ime ntọala nkuzi niile na ihe mmetụta sensọ site na iji LinkControl nkwụnye (ngwa ngwa nhọrọ) yana ngwa LinkControl maka Windows©.

Tọọ ihe mmetụta sensọ site na usoro nkuzi

Tọọ mmepụta analọg

Tọọ oke mpio			Tọọ ngụpụta njirimara na-ebili/ada ada
Debe ihe ahụ na ọnọdụ 1.
Jikọọ Com maka ihe dịka 3 s ka +UB, ruo mgbe LED abụọ ahụ na-enwu n'out oge.			Jikọọ Com maka ihe dịka 13 s ka +UB, ruo mgbe LED abụọ ahụ na-enwu ọzọ.
Igwe ọkụ abụọ a:	gbanye ọzọ		Green ikanam: Ikanam edo edo:	na-egbuke egbuke on: na-ebili gbanyụọ: ọdịda njirimara okirikiri
Debe ihe ahụ na ọnọdụ 2.
Jikọọ Com maka ihe dịka 1 s ka ọ bụrụ +UB.			Ka ịgbanwee njirimara mmepụta jikọọ Com maka ihe dịka 1 s ka +UB.
			Chere ihe dị ka nkeji iri.
Ụdị ọrụ nkịtị

Ntọala ndị ọzọ

Gbanwee Teach-in + mmekọrịta			Tọgharịa na ntọala ụlọ ọrụ
Gbanyụọ ọkụ ọkụ.			Gbanyụọ ọkụ ọkụ.
Jikọọ Com na -UB.			Jikọọ Com na -UB.
Gbanwee ọkụ ọkụ.			Gbanwee ọkụ ọkụ.
Jikọọ Com na -UB maka ihe dịka 3 s, ruo mgbe LED abụọ ahụ na-enwu n'out oge.			Jikọọ Com na -UB maka ihe dịka 13 s, ruo mgbe LED abụọ Kwụsị na-egbu maramara.
Akwụkwọ ndụ akwụkwọ ndụ: Ikanam edo edo:	na-egbuke egbuke
	on: nkuzi-na		Kwupu Com na -UB.
	off: Mmekọrịta
Ka ịgbanwee ọnọdụ ọrụ jikọọ Com maka ihe dịka 1 s ka -UB.
Chere ihe dị ka nkeji iri.
Ụdị ọrụ nkịtị

Data teknụzụ

microsonic GmbH / Phoenixseestraße 7 / 44263 Dortmund / Germany / T +49 231 975151-0 / F +49 231 975151-51 / E info@microsonic.de / W microsonic.de
Ọdịnaya nke akwụkwọ a bụ n'okpuru mgbanwe teknụzụ. E gosipụtara nkọwapụta dị na akwụkwọ a n'ụzọ nkọwa naanị. Ha anaghị enye ikike njirimara ngwaahịa ọ bụla.

Akwụkwọ / akụrụngwa

microsonic pico+15-TF-I Ultrasonic sensọ nwere otu mmepụta ihe analog [pdf] Akwụkwọ ntuziaka onye ọrụ pico 15-TF-I Ultrasonic sensọ nwere Otu ihe Analogue, pico 15-TF-I, Ihe mmetụta Ultrasonic nwere otu mmepụta Analogue, Otu Mmepụta Analogue, Mmepụta Analogue

Ntụaka

• Akwụkwọ ntuziaka onye ọrụ