200W AC Input Eguquguqukayo Frequency
Shayela Imojuli enomsebenzi we-PFC
VFD-200C-230
VFD-200C-230 AC Input Variable Frequency Drive Module
 |
 |
| https://www.meanwell.com/Upload/PDF/VFD-E.pdf | https://youtu.be/I8xQxZdWf7A?si=u2BEOM4Fqx1beXny |
Izici
- 90~264Vac okokufaka, i-PFC eyakhelwe ngaphakathi ikhulisa ku-380VDC
- Amandla stage, amaswishi ezigaba ezi-3 anezinzwa kuyunithi eyodwa yokulawula kwangaphandle (ibhodi lokulawula i-VFD-CB lithengiswa kakhulu)
- Inani eliphakeme kakhulu lamanje elingafika ku-200% namasekhondi angu-5
- Idizayini engenabalandeli yokusebenza buthule nempilo ende
- Ukuvikela: Isekhethi emfishane / OCP
- Izinzwa zangaphakathi zidla ngokulawula: Inzwa yamanje - isilawuli setorque yemoto
DC ibhasi voltaginzwa ye-e - OVP/UVP
Inzwa yezinga lokushisa – OTP - -30~+70°C ububanzi bokushisa bokusebenza
- Ifanele i-3-phase motor drive
(isb i-BLDC, i-Induction motor, i-SynRM) - Iwaranti yeminyaka emi-3
Izinhlelo zokusebenza
- I-HVAC
- Umlandeli
- Iphampu yamanzi/Yomoya
- Amathuluzi amandla
- I-Conveyor
- Umnyango ozenzakalelayo
- Imishini yokufaneleka
IKHODI YE-GTIN
Ukusesha kwe-MW: https://www.meanwell.com/serviceGTIN.aspx
Incazelo
I-VFD-200C-230 iyimojula yamandla okushayela imvamisa eguquguqukayo enikeza amandla ahlanganisiwetage, abashayeli bamasango kanye nezinzwa eziyisisekelo ze-VFD njengezinzwa zezigaba ezintathu zamanje nezinga lokushisa. Lo mkhiqizo ungasetshenziselwa isixazululo se-motor drive yezigaba ezintathu ngokuxhumanisa nesilawuli se-motor drive sangaphandle ezingeni lokunengqondo kanye ne-analog I/0. Amandla stagOkokufaka kwe-e kuyibanga eligcwele lesigaba esisodwa ukusuka ku-90VAC ukuya ku-264VAC ngomsebenzi we-PFC. I-3-phase motor okukhiphayo ifinyelela ku-240V enamandla angu-200% aphezulu.
Injini yokungeniswa, kanye nezinhlelo zokusebenza ze-SynRM.
Ukumiswa kwekhodi kwemodeli
INKCAZO
| IMODEL NO. | VFD-200-230 | ||||
| UKUPHUMA KWE-PWM (Qaphela 1,234) |
I-VOLTAGE RANGE (UVW) | 380Vmax, ivolumu yomugqa kuya kumugqatagI-e 0-268V eguquguqukayo nge-PWM eshintshiwe, ilungele i-3PH 200-240V yekilasi motor | |||
| CURRENT | Ikaliwe | 0.8A | |||
| Isiqongo | 1.6A imizuzwana engu-5 | ||||
| AMANDLA AKALIWE | 200W | ||||
| UKUSEBENZA | 92% | ||||
| DC BUS VOLTAGE | 380 ±5VDC | ||||
| I-PWM FREQUENCY | 2.5 KHz -15 KHz | ||||
| INPUT | OKULINGANISWE WOKUFAKA IVOLTAGE | 90 - 264VAC | |||
| I-INPUT FREQUENCY RANGE (Hz) | 47 - 63Hz | ||||
| AMANDLA FUTHI (Uhlobo.) | PF>0.99/115VAC, PF >0.93/230VAC ngokulayisha okugcwele | ||||
| OKUFAKAYO OKULINGANISWE NJENGAMANJE | 3.5A/115VAC 2Al230VAC | ||||
| INRUSH NJENGAMANJE | Ukuqala okubandayo okungu-50A /230VAC | ||||
| UKUVUZA NJENGAMANJE | <2mA/240VAC | ||||
| UKULAWULA! UMSEBENZI (Qaphela 5) |
3•ISIGABA SOKULAWULWA KWE-PWM | Isiginali yokulawula ye-PWM kumshayeli wesango lama-IGBT. (CN93, PING-13) Okokufaka kwe-33V TTL/CMOS: Hiqh(>2.7V): IGBT ON ; Phansi(<0.4V): I-IGBT IVALIWE |
|||
| ISIGABA 3 Inzwa YAMANJE | I-shunt resistor eyakhelwe ngaphakathi engu-100mO kusigaba se-UVW (CN93, PI144-6) | ||||
| DC BUS VOLTAGInzwa ye-E | DC BUS voltagokukhiphayo kwenzwa (CN93, PINT) 2.5V@DC BUS 380V | ||||
| Inzwa Yokushisa | I-10K0 NTC eyakhelwe ngaphakathi yokuzwa izinga lokushisa lokusebenza kwama-IGBT. (TSM2A103F34D1R (Thinking Electronic), PI N3 ye-CN93) | ||||
| ISIGONA YEPHUTHA | Isiginali yephutha ye-Inverter(Isekhethi emfishane/OCP, CN93, PI N7). 3.3V TTL/CMOS okukhiphayo: Okuvamile: Hiqh(>3V); Okungajwayelekile: Phansi(<0.5V) |
||||
| AMANDLA AYISIZA | Amandla okukhiphayo angu-15V angahlukanisiwe ebhodi lokulawula langaphandle (CN93, PIN 14 kuya ku-PI142 ) 15V@0.1A; Ukubekezelela +/- 0.5V, Ripple 1Vp-p max | ||||
| UKUVIKELA | WESIFUNDA ESIFISHANE | Uhlobo lokuvikela : Vala i-o/p voltage, vula amandla kabusha ukuze ululame | |||
| EZIMO | I-TEMP YOKUSEBENZA. | -30 – +70°C (Bheka “Ijika Lokukhulisa u-D) | |||
| UKUSEBENZA UKUTHOBEKA | 20 – 90% i-RH engafinyeleli | ||||
| STORAGE TEMP., HUMIDITY | -40 – +85°C, 10 – 95% i-RH engafinyeleli | ||||
| UKUDLIZELA | 10 – 500Hz, 2G 10min./Tcycle, isikhathi se-60min. ngayinye ihambisana nezimbazo ezingu-X, Y, Z | ||||
| UKUPHEPHA NE-EMC | AMAZINGA OKUPHEPHA | I-CB I EC61800-5-1,TUV/BS EN/EN61800-5-1,EAC TP TC004 igunyaziwe | |||
| INGABE I-VOLTAGE | I/P-FG:2KVAC | ||||
| UKUMELANA UKUZIHLUPHA | I/P-FG:100M Ohms/500VDC!25°C! 70%RH | ||||
| EMC UKUVUSELELWA | Ipharamitha | Okujwayelekile | Test Level I Note | ||
| Kwenziwa | I-BS EN/EN IEC61800-3 | I-ClassA, C2 | |||
| Ikaliwe | I-BS EN/EN IEC61800-3 | I-ClassA, C2 | |||
| IHarmonic yamanje | I-BS EN/EN IEC61000-3-2 | IkilasiA | |||
| Voltage Flicker | I-BS EN/EN61000-3-3 | ||||
| UKUVIKELWA EMC | I-BS EN/EN IEC61800-3, indawo yesibili | ||||
| Ipharamitha | Okujwayelekile | Izinga Lokuhlola/Qaphela | |||
| ESD | I-BS EN/EN61000-4-2 | Izinga 3, 8KV umoya; Izinga 2, 4KV othintana naye | |||
| Ikaliwe | I-BS EN/EN IEC61000-4-3 | Izinga3 | |||
| EFT / Burest | I-BS EN/EN61000-4-4 | Izinga3 | |||
| Surge | I-BS EN/EN61000-4-5 | Izinga 3, 2KV/Line-Earth; Izinga 3, 1KV/Layini-Ulayini | |||
| Kwenziwa | I-BS EN/EN61000-4.6 | Izinga3 | |||
| Inkambu Yezibuthe | I-BS EN/EN61000-4-8 | Izinga4 | |||
| Voltage Amadiphu kanye neziphazamiso | I-BS EN/EN IEC61000-4-11 | >95% dip 0.5 izikhathi, 30% d IP 25 izikhathi, >95% ukuphazamiseka 250 izikhathi | |||
| Voltage ukuchezuka | I-IEC 61000-2-4 Ikilasi 2 | ±10% Un | |||
| Isamba se-Harmonic distortion (THD) I-Harmonic order yomuntu ngamunye | I-IEC 61000-2-4 Ikilasi 3 IEC 61000-4-13 Ikilasi 3 | I-THD 12% | |||
| Ukuhluka kwemvamisa | I-IEC 61000-2-4 | ±4% | |||
| Izinga lokushintshwa kwemvamisa | I-IEC 61000-2-4 | 2%/s | |||
| ABANYE | MTBF | 2568.7K amahora min.Telcordia SR-332 (Bellcore); 203.8K hrs m in.M IL HDBK-217F (25°C) | |||
| DIMENSION (L'WII) | 146'55'26mm | ||||
| UKUPAKA | 0.31 Kg;40pcs/13.3kg/0.87CUFT | ||||
| QAPHELA | Injini engu-1.3 yesigaba esingu-220V iyanconywa.Sicela ucabangele yamanje elinganiselwe uma isetshenziselwa injini yekilasi engu-100-120V. 2.Bheka kukhono eliphezulu lamanje ku-"V/I Curve". I-3.Ukusebenza kahle kuhlolwa ngomthwalo we-inductive kumandla alinganiselwe amanje kanye namandla agcwele. 4.Wonke amapharamitha OKUNGEKHO okushiwo ngokukhethekile akalwa ngokokufaka okungu-230VAC, umthwalo olinganiselwe kanye no-25°C wezinga lokushisa elizungezile. 5.Sicela ubhekisele ku-“Functional Manual” ukuze uthole imininingwane eyengeziwe.  Umshwana Wokuzikhipha Emthwalweni Wesibopho Somkhiqizo Ukuze uthole ukwaziswa okwengeziwe, sicela ubheke https://www.meanwell.com/serviceDisclaimer.aspx |
||||
Umdwebo weBlock
Imanuwali Yomsebenzi
- Isigaba esi-1.3 se-PWM Control (CN93, PIN8~13)
I-VFD-200C-230 inikeza isekethe yokushintsha okuyisithupha ngokusebenzisa ama-IGBT angu-3 webhuloho elinguhhafu. Ama-IGBT esigaba ngasinye alawulwa ngu
(I-PIN 8~13). Imfuneko yokokufaka ye-PWM ihambisana namasiginali we-TTL kanye ne-CMOS 3.3V. Sicela ubheke umdwebo ongezansi. 
ISEXWAYISO: Kuyadingeka ukugcina ubuncane besikhathi sokufa phakathi kweswishi ephezulu nephansi yesigaba ngasinye.
- 2.3 (CN93, PIN4~6)Isigaba Esi-3 Ukutholwa Kwamanje Nokuvikelwa Kwamanje
I-Low-side shunt resistors 100mΩ ifakwe esigabeni ngasinye se-VFD-200C-230 ngesilinganiso samanje kanye nokutholwa kwesiyingi esifushane. Kunconywa ukuthi kufinyezwe ubude bomjikelezo wokutholwa kwangaphandle futhi kutholwe isiginali ngama-OPA. Sicela ubhekisele kumdwebo ongezansi.
Uma amandla okukhiphayo edlula u-200% yenani elilinganiselwe, isifunda sokuvikela sangaphakathi sizocushwa futhi kuvalwe umshayeli wesango ukuze avikeleke.
- DC BUS VoltagI-e Detection (CN93, PIN1)
I-VFD-200C-230 yakhelwe ngaphakathi nge-DC bus voltaginzwa ye-e(inzwa ye-HV+, i-PIN 1). Inzwa inikeza okukhiphayo okungu-2.5V uma ibhasi le-DC voltage ku 380V. Kuphakanyiswa ukuthi kutholwe isiginali ngama-OPA. Lapho i-voltagI-e yebhasi le-DC idlula i-420V, isignali yokufaka ye-PWM kufanele ivalwe ukuze ivikelwe.
- I-IGBT Temperature Detection (CN93, PIN3)
I-VFD-200C-230 yakhelwe ngaphakathi kwe-NTC resistor ukuze ithole izinga lokushisa lama-IGBT. Abasebenzisi bangathola izinga lokushisa le-IGBT ukuze bavikeleke. (Uhlobo lwe-NTC: TSM2A103F34D1R, I-Think Electronic) Umjikelezo wokutholwa onconywayo ungezansi. Kunconywa ukuvala okokufaka kwe-PWM, uma izinga lokushisa lingaphezu kuka-95℃.
- Isiginali yephutha
Uma i-VFD-200C-230 ihlangabezana nenkinga ye-overcurrent futhi ihlale ikuleso simo isikhathi esincane esidlule, isignali ye-FAULT izosebenza (iphansi esebenzayo) ukwazisa isilawuli sangaphandle noma isekethe.
- Izincomo zamabhuleki(CN100,PIN1,3)
I-VFD-200C-230 egodliwe i-CN100 PIN1,3 exhuma ku-HV+,HV- yomklamo wamabhuleki wesekethe.
Umkhawulo wevoltagI-e ku-DC Bus(HV+) akufanele ibe ngaphezu kuka-420V.
Ukucaciswa Kwemishini
I-AC Input Terminal PIN NO. Isabelo (TB1)
| Iphini No. | Isabelo |
| 1 | AC / L |
| 2 | I-AC / N. |
| 3 |  |
Iphinikhodi ye-Qutput Terminal NO. I-Assignment (TB100)
| Iphini No. | Isabelo |
| 1 | U |
| 2 | V |
| 3 | W |
I-380V DC Bus Connector(CN100): JST B3P-VH noma okulinganayo
| Iphini No. | Ukunikezwa kwe-AW |
| 1 | HV+ |
| 2 | Ayikho iPhini |
| 3 | I-HV - |
Izindlu zokukhwelana: JST VHR noma okulinganayo
Itheminali: JST SVH-21T-P1.1 noma okulinganayo
I-CN100 isetshenziselwa ukufaka idivayisi yebhuleki evuselelayo, igwema ukulimala kwe-VFD-200C-230.
Iphinikhodi yokulawula NO. Isabelo (CN93) : HRS DF11-14DP-2DS noma okulinganayo
| Iphini No. | Isabelo | Iphini No. | Isabelo |
| 1 | Inzwa ye-HV+ | 8 | PWM_W H |
| 2 | HV- | 9 | PWM_W L |
| 3 | I-RTH | 10 | PWM_V H |
| 4 | RsH U | 11 | PWM_V L |
| 5 | RsH V | 12 | PWM_U H |
| 6 | RSH_W | 13 | PWM_U L |
| 7 | IPHUTHA | 14 | I-Vaux _ 15V |
Izindlu zokukhwelana: HRS DF11-14DS noma okufanayo
Itheminali i-HRS DF 11-**SC noma efanayo
Iphinikhodi yokulawula Nombolo Yokwabiwa(CN93):
| Iphini No. | Umsebenzi | Incazelo |
| 1 | Inzwa ye-HV+ | DC BUS voltagokukhiphayo kwenzwa, ireferensi kuphinikhodi 2(HV-) |
| 2 | HV- | DC BUS voltagi-sensor okukhiphayo emhlabathini |
| 3 | I-RTH | Inzwa yezinga lokushisa |
| 4 | RSH_U | Okukhiphayo kwenzwa yamanje yesigaba U |
| 5 | RSH_V | Okukhiphayo kwenzwa yamanje yesigaba se-V |
| 6 | RSH_W | Okukhiphayo kwenzwa yamanje yesigaba se-W |
| 7 | IPHUTHA | Ngaphezu kokutholwa kwamanje. Okuvamile > 3V, Okungajwayelekile <0.5V |
| 8 | PWM_W H | Okokufaka okunengqondo kwesigaba esiphezulu se-W, ku-> 2.7V; kuvaliwe <0.4V |
| 9 | PWM_W L | Okokufaka okunengqondo kwesigaba esiphansi se-W, ku-> 2.7V; kuvaliwe <0.4V |
| 10 | PWM_V H | Okokufaka okunengqondo kwesigaba esiphezulu se-V, ku-> 2.7V; kuvaliwe <0.4V |
| 11 | PWM_V L | Okokufaka okunengqondo kwesigaba esiphansi se-V, ku-> 2.7V; kuvaliwe <0.4V |
| 12 | PWM_U H | Okokufaka okunengqondo kwesigaba esiphezulu se-U, ku-> 2.7V; kuvaliwe <0.4V |
| 13 | PWM_U L | Okokufaka kwe-logic ohlangothini oluphansi lwe-U, ku-> 2.7V; kuvaliwe <0.4V |
| 14 | I-Vaux_15V | I-Axiliary voltage okukhiphayo 15V inkomba pint (HV-). Ubukhulu bomthwalo wamanje ngu-0.1A |
Isicelo
Isicelo example: BLDC drive application
- Isibalo sibonisa uhlelo lwe-BLDC drive olusethwe nge-VFD-200C-230.
- Onjiniyela bangakwazi ukulawula isignali ye-PWM ye-6-switch ngokusebenzisa i-SPWM noma i-SVPWM, njll. ngevolumu yesigaba esingu-3tagi-modulation, futhi yakhe isisekelo sendlela yokulawula kuzinzwa zamanje ze-shunt kuswishi yohlangothi oluphansi lwesigaba esi-3(RSH_U/V/W) kanye nevolumu ye-DC BUStaginzwa ye-e(HV-+ sensor) ehlinzekwa yi-VFD-200C-230.
- Onjiniyela bangakhetha izinzwa zokuma ezifanele ze-BLDC njengesifaki khodi noma izinzwa ze-Hall-effect ukuze zilingane nezinhlelo zabo zokusebenza.
- Kunconywa ukuthi ufake i-brake circuit/device ku-HV-+/HV- pin( DC BUS,CN100) ukuze kugwenywe i-DC BUS OVP uma i-BLDC incipha.
- Kunconywa ukuthi uvale okokufaka kwe-PWM noma uxhume kudivayisi ye-brake resistor ukuze uphephe uma i-DC Bus vol.tagIngaphezulu kuka-420V.
- Uma i-VFD-200C-230 isetshenziswe ngokulawula okungafanelekile, njengokusheshisa ngokushesha kakhulu noma ukulawulwa okubi kwamanje, kungase kubangele isimo sephutha se-VFD-200C-230 ukuvala ivolumu yokuphumayo.tage (izinga eliphansi kuphinikhodi ye-FAULT).
Ukufakwa
- Sebenza ngepuleti le-aluminium eyengeziwe
Ukuze kuhlangatshezwane ne-*Derating Curve” kanye “Nochungechunge Lwezici Eziqinile* lwe-VFD kufanele lufakwe epuleti le-aluminium(noma ikhabethe elinosayizi ofanayo) ngezansi. Usayizi wepuleti le-aluminium eliphakanyisiwe liboniswe ngezansi. Futhi ukuze kuthuthukiswe ukusebenza okushisayo, ipuleti le-aluminium kufanele libe nendawo elinganayo futhi ebushelelezi (noma egcotshwe ngamafutha ashisayo), futhi uchungechunge lwe-VFD kufanele lubekwe ngokuqinile phakathi nendawo yepuleti le-aluminium.
- Ngomoya ophoqelelwe ongu-15CFM
Uhlu Lwesesekeli
Uma unesidingo sokulawula sohlelo oluthile, sicela uthintane ne-MEAN WELL ukuze uthole imininingwane eyengeziwe.
Ibhodi lokulawula izimoto (Ibhodi lokulawula i-Motor kanye ne-VFD drive module kufanele i-ode ngokuhlukana)
| Inombolo ye-MW. | Ibhodi Lokulawula | Ukusikisela Komhlangano | Ubuningi |
| I-VFD-CB |  |
 |
1 |
Uhlelo lokusebenza olujwayelekile
- I-Vaable Frequency Module (uchungechunge lwe-VFD)
- Ibhodi lokulawula le-Vaable Frequency Drive (Idizayinwe Umsebenzisi noma I-Soluton Ihlinzekwe nguMEAN WELL)
- 3-isigaba Pump Motor
- Ibhethri
- I-Vaable Frequency Module (uchungechunge lwe-VFD)
- Ibhodi lokulawula le-Vaable Frequency Drive (Idizayinelwe Umsebenzisi noma i-Soluton Ihlinzekwe ngu-MEAN WELL)
- 3-isigaba Wheel Motor for AGV Isicelo
- I-Vaable Frequency Module (uchungechunge lwe-VFD)
- Ibhodi lokulawula le-Vaable Frequency Drive (Idizayinelwe Umsebenzisi noma i-Soluton Ihlinzekwe ngu-MEAN WELL)
- I-Fan Motor enezigaba ezi-3
- I-HEPAfor Filtering Air
IKHITHI YEDEMO
Sicela uthinte u-MEAN WELL ukuze uthole imininingwane eyengeziwe.
Ikhithi Yedemo ye-VFD Umsebenzi Oyinhloko nezici.
- I-VFD-350P-230 eyakhelwe ngaphakathi kanye ne-230V motor.
- Ukuqala/ukumisa/ukuyisa phambili/ukuhlehla/ukulawula isivinini.
- I-motor start/stop/forward/reverse indicator kwesokudla.
- Isibonisi sesivinini semoto (RDM).
- Ibhodi lokulawula lingashintshwa.
- Sekela ukuxhumeka kwemoto yangaphandle.
Imanuwali yokufaka
Sicela ubhekisele ku: http://www.meanwell.com/manual.html
Amadokhumenti / Izinsiza
 |
MEAN WELL VFD-200C-230 AC Input Variable Frequency Drive Module Nomsebenzi we-PFC [pdf] Incwadi Yomnikazi VFD-200C-230, VFD-200C-230-20240812, VFD-200C-230 AC Input Variable Frequency Drive Module with PFC Function, VFD-200C-230, AC Input Variable Frequency Drive Module, Variable Frequency Drive Module with PFC Function PFC Umsebenzi, Frequency Drive Imojula enomsebenzi we-PFC, Imojula yeDrayivu enomsebenzi we-PFC, Imojula enomsebenzi we-PFC, enomsebenzi we-PFC, Umsebenzi we-PFC, Umsebenzi |