|
DALC |
Okuqukethwe
fihla
I-DLM single channelI-Multi INPUTImanuwali Yedivayisi |
|
| UMfu 2022-02-05 |
Kwenziwe e-Italy
IZICI
- FADER+DIMMER+DRIVER
- Okokufaka kwe-DC: 12-24-48 Vdc noma 12-24 Vdc
- I-MULTI INPUT - Ukutholwa Okuzenzakalelayo kwe-Analogic komyalo Wendawo:
- Imvamisa Vula inkinobho yokucindezela
- Okokufaka kwe-analog 0-10V
- Okokufaka kwe-analog 1-10V
- I-Potentiometer 10KOhm - PUSH MENU' – Amathuba okusetha:
– Inani elincane lokufiphaza
- Qhubeka
- Ukunyamalala - IConstant Voltage okuhlukile kwezinhlelo zokusebenza ze-Common Anode
- VoltagImiphumela ye-RLC yemithwalo, i-DLM1248-1CV ehlukile
- Voltage imiphumela yemithwalo ye-R, okuhlukile kwe-DLM1224-1CV
- Umsebenzi wenkumbulo
- Ukulungisa ukukhanya kokukhanya okumhlophe noma umbala we-monochromatic
- Ukulungisa ukukhanya kuze kuqedwe
- Isiqalo esithambile nesitobhi esithambile
- Umsebenzi wokuvumelanisa – Inkosi/Isigqila
- Ijika lokuphumayo elilungiselelwe
- Ukusebenza okujwayelekile > 95%
- 100% Ukuhlolwa okusebenzayo - Iwaranti yeminyaka emi-5
Ngokuba konke futhi olusha Imanuwali Yedivayisi bheka komkhiqizi webindawo: http://www.dalcnet.com
UMQULU OQHUBEKAYOTAGE IZINHLOKO
Isicelo: Dimmer
| IKHODI | Okokufaka ivoltage | Okukhiphayo | Iziteshi | Ukutholwa Okuzenzakalelayo kwe-Analogic | |
| Idatha ye-DLM1248-1CV | I-12-48V DC | 1 x 6,5A | 1 | N° 1 CHA Inkinobho Yokusunduza I-N° 1 isignali ye-analog 0-10V I-N° 1 isignali ye-analog 1-10V N° 1 I-Potentiometer 10K |
 |
| Idatha ye-DLM1224-1CV | I-12-24V DC | 1 x 10A | 1 | N° 1 CHA Inkinobho Yokusunduza I-N° 1 isignali ye-analog 0-10V I-N° 1 isignali ye-analog 1-10V N° 1 I-Potentiometer 10K |
|
I-LED dimmer ikhiqizwa ngokuzenzakalelayo nge:
- Ukutholwa Okuzenzakalelayo kwe-Analogic komyalo wendawo osethwe NJENGAKHO Inkinobho Yokusunduza
- Ukunciphisa izinga elincane elingu-1%
IZIVIKELO
| Idatha ye-DLM1248-1CV | Idatha ye-DLM1224-1CV | ||
| I-OTP | Ukuvikela ngaphezu kwezinga lokushisa1 |  |
 |
| I-OVP | Ngaphezulu kwevolumutagukuvikelwa2 | |
|
| I-UVP | Ngaphansi kwevolumutagukuvikelwa2 | |
|
| I-RVP | Ukuvikelwa kokuhlehla kwe-polarity2 | |
|
| I-IFP | Ukuvikelwa kwe-fuse okokufaka2 | |
|
| I-SCP | Ukuvikelwa kwesifunda esifushane | |
|
| I-OCP | Vula ukuvikelwa kwesekethe | |
|
| I-CLP | Ukuvikelwa komkhawulo wamanje | |
|
1 Ukuvikela okushisayo esiteshini esiphumayo uma izinga lokushisa liphezulu. Ukungenelela okushisayo kutholwa yi-transistor.
2 Lawula ukuvikela okunengqondo kuphela.
REFERENCE AMAZINGA
| EN 61347-1 | Lamp izinto zokulawula - Ingxenye 1: Izidingo ezijwayelekile kanye nokuphepha |
| I-EN 55015 | Imikhawulo nezindlela zokulinganisa izici zokuphazamiseka komsakazo wokukhanyisa ugesi nezinye izinto ezifanayo |
| I-EN 61547 | Izisetshenziswa zezinjongo zokukhanyisa okuvamile - Izidingo zokuzivikela ze-EMC |
| I-IEC 60929-E.2.1 | Isixhumi esibonakalayo sokulawula sama-ballast alawulekayo - control by dc voltage - ukucaciswa kokusebenza |
| I-ANSI E 1.3 | Ubuchwepheshe Bokuzijabulisa - Izinhlelo Zokulawula Ukukhanyisa - 0 kuya ku-10V Ukucaciswa Kwe-Analog Control |
IMICIMBI YOBUCHWEPHESHE
| Imifanekiso ye-DLM1248-1CV | Imifanekiso ye-DLM1224-1CV | ||
| I-vol evamiletage | I-vol evamiletage | ||
| Ukunikezwa kwevoltage | imiz: 10,8 Vdc .. ubuningi: 52,8 Vdc | imiz: 10,8 Vdc .. ubuningi: 26,4 Vdc | |
| Umphumela voltage | = Vin | = Vin | |
| Okokufaka kwamanje | ubuningi 6,5A | ubuningi 10A | |
| Okukhiphayo okwamanje | 6,5A 3 | 10A 3 | |
| Amandla okuzisholo amuncwa3 | @12V | 78 W | 120 W |
| @24V | 156 W | 240 W | |
| @48V | 312 W | – | |
| Ukuphelelwa amandla kumodi yokulinda | <500mW | <500mW | |
| Uhlobo Lomthwalo | R – L – C | R | |
| Ukucisha ukushisa4 | 150°C | – | |
| Umyalo wokunikezela okwamanje | 0,5mA (1-10V ngayinye) | 0,5mA (1-10V ngayinye) | |
| Umyalo odingekayo wamanje (ubukhulu) | 0,1mA (0-10V ngayinye) | 0,1mA (0-10V ngayinye) | |
| D-PWM dimming frequency | 300Hz | 300Hz | |
| Isixazululo se-D-PWM | 16 bit | 16 bit | |
| Ibanga le-D-PWM | 0,1 - 100% | 0,1 - 100% | |
| Izinga Lokushisa Lesitoreji | imiz: -40 ubuningi: +60 °C | imiz: -40 ubuningi: +60 °C | |
| I-Ambient Temperature | imiz: -10 ubuningi: +40 °C | imiz: -10 ubuningi: +40 °C | |
| Izintambo | 2.5 mm2 ukuqina - 2.5 mm2 ivaliwe - 30/12 AWG | 1.5 mm2 ukuqina - 1 mm2 ivaliwe - 30/16 AWG | |
| Ubude bokulungiselela intambo | 5.5 – 6.5 mm | 5 – 6 mm | |
| Ibanga lokuvikela | IP20 | IP20 | |
| Impahla ye-casing | Ipulasitiki | Ipulasitiki | |
| Iyunithi yokupakisha (izingcezu/iyunithi) | Ibhokisi Lekhathoni Elilodwa 1 pz | Ibhokisi le-Carton 10pz | |
| Ubukhulu bemishini | 44 x 57 x 25 mm | 44 x 57 x 19 mm | |
| Ubukhulu bephakheji | 56 x 68 x 35 mm | 164 x 117x 70 mm | |
| Isisindo | 40g | 306g | |
3 Inani eliphakeme kakhulu, kuya ngezimo zokungena komoya. Leli nani likalwa ku-40°C, izinga lokushisa eliphakeme kakhulu le-ambient.
4 Ukuvikela okushisayo esiteshini esiphumayo uma izinga lokushisa liphezulu. Ukungenelela okushisayo kutholwa yi-transistor.
UKUFAKA
Ukuze usethe umkhiqizo, landela umyalo osesithombeni esingezansi:
1) xhuma amandla kagesi (12-24 Vdc noma 12-48 Vdc kuye ngemodeli ye-dimmer) kumabhulokhi wetheminali “DC IN” yedivayisi.
2) xhuma i-LOCAL COMMAND kutheminali block "INPUT" yocingo.
3) xhuma i-LED kutheminali yokukhipha amabhulokhi "OUT" wedivayisi.
PUSH Isici se-DIMMER
Amandla kanye nokushintsha kwesimo (VULIWE/KUVALIWE) kulawulwa inkinobho ethi CHA.
| Inkinobho | Ukuqina |
| Chofoza | Khanyisa cisha |
| Chofoza kabili | Ukuqina okukhulu |
| Ukucindezela okude (>1s) kusuka KUVALIWE | VULA ngo-1% (Isikhathi Sasebusuku), bese ufiphalisa phezulu/phansi |
| Ukucindezela okude (>1s) kusuka ku-ON | Nciphisa phezulu/phansi |
| 15 Chofoza ngo-5 okwesibili | Ngena ku-PUSH MENU' |
I-0-10V & 1-10V & NESICI SE-POTENTIOMETER
Ukuqina kulawulwa yi-input voltage ukwehluka.
| Inkinobho | Umsebenzi | Ukuqina | |
| 0-10V | I-Dimmer: 0-1V=0% | 10V=100% | |
| 1-10V | |||
| I-Potentiometer 10K | |||
PHUSHA IMENU'
UMSEBENZI UYATHOLAKALA
❖ IMINININGWANE YOKUFAKAZA
❖ AMANDLA-KU-RAMP (FULA NGAPHAKATHI)
❖ UKUVALWA KWAMANDLA RAMP (IYAFIMELA)
UKUFINYELELA KWIMENU'
Uma ukhanyisa i-LED dimmer, okukhiphayo kusethwa ku-100% futhi ubuncane bokufiphalisa bungu-1%.
Ukuze ufinyelele imenyu yedivayisi, chofoza inkinobho yokucindezela izikhathi ezingu-15 esikhathini esingamasekhondi angu-5.
Uma Umthwalo ubaneka, uku-“MENU' 1”.
• IMENU' 1 – IMINININGWANE EYINGCANE YOKUFINYEZA
Ukuchofoza ngakunye kuyenza iguqule inani elincane lokufiphaza
Kunamazinga ayisithupha aphansi: 0,1%, 1%, 5%, 10%, 20%, 30% kanye 100%
Ngemva kokusetha inani eliphansi lokufiphaza cindezela isikhathi eside ukuze uqinisekise.
Ukukhanyisa okukabili kuqinisekisa isitoreji futhi ungaya kokuthi “MENU' 2”
Qaphela: uma usetha izinga eliphansi libe ngu-100%, uma izilungiselelo seziqinisekisiwe, idivayisi iphuma ngokuzenzakalelayo ku-MENU'.
• IMENU' 2 – AMANDLA-KU-RAMP (FULA NGAPHAKATHI)
Ukuchofoza ngakunye kuyenza iguqule amandla okufaka u-ramp
Kunamazinga amahlanu wamandla ku-ramp (FADE IN): Ngokushesha, isekhondi elingu-1, imizuzwana emi-2, imizuzwana emi-3, imizuzwana engu-6
Ngemva kokusetha i-FADE IN cindezela isikhathi eside ukuze uqinisekise.
Ukubaneka okuthathu kuqinisekisa isitoreji futhi ungaya kokuthi “MENU' 3”
• IMENU' 3 – UKUVALWA KWAMANDLA RAMP (IYAFIMELA)
Ukuchofoza ngakunye kuyenza iguqule u-r off-offamp
Kunamazinga amahlanu okucisha amandla ramp (IYAQHUBEKA): Ngokushesha, isekhondi elingu-1, imizuzwana emi-2, imizuzwana emi-3, imizuzwana engu-6.
Ngemva kokusetha i-FADE OUT cindezela isikhathi eside ukuze uqinisekise.
Ukubaneka okuthathu okusheshayo kuqinisekisa isitoreji futhi uyaphuma kokuthi “DEVICE MENU”
Uma uphumile ku-Menu', i-Lamp exhunywe ku-LED Dimmer ivula kuleveli encane yokufiphalisa emiswe ngaphambilini.
UMYALELO WENDAWO
UKUTHOLA NGOKUZENZAKALELAYO KOHLOBO LOMYALELO WAsendaweni
Ekushintsheni kokuqala idivayisi isethwe ngokuzenzakalelayo ekuboneni okuzenzakalelayo kwenkinobho yokucindezela AKUKHO Umyalo.
❖ UKUTHOLA NGOKUZENZAKALELAYO KOMYALELO WE-0/1-10V & POTENTIOMETER
Ukuqashelwa okuzenzakalelayo kwesiginali ye-analog engu-0/1-10V noma i-potentiometer kuqala njengevelu engu-0/1-10V phakathi kuka-3V no-7V ithunyelwa noma kusethwa i-potentiometer enevelu ehlanganisiwe ukusuka ku-30% kanye no-70%.
| UMYALELO 0-10V | UMYALELO 1-10V | I-POTENTIOMETER |
 |
 |
 |
❖ UKUTHOLA NGOKUZENZAKALELAYO KOMYALELO WENKONZO YOKUNGEKHO PHAMBILI
Inkinobho ye-NO yokucindezela ikhonjwa ngokuzenzakalelayo ngemva kokuchofoza oku-5 ngokulandelana okusheshayo.
Kumodi AKUKHO inkinobho yokucindezela, inkumbulo yokusebenza ihlala isebenza.
| INKONZO YOKUPHUSHA |
 |
UKUFAKA KOKUVUMELANISA
IVUMELANISA NOMSEBENZI WAMANDLA OWODWA
Kungenzeka ukuxhuma amadivaysi amaningi omndeni we-DLM-1CV phakathi kwawo kumodi ethi Master/Slave
Xhuma umyalo wasendaweni owuthandayo ocingweni olusetshenziswa njenge-Master. Xhuma isignali ye-“TX” eyinhloko kuminyango ye-“RX” yesigqila.
ExampInkosi/Inceku:
UKUVUMELANISA UKUSEBENZA NGOKUTHINISELWA KWAMANDLA OKUWODWA KU-DIMMER
Esimeni lapho amandla amaningi asetshenziswa ukuze kunikwe amandla ama-dimmer okuthi “master” kanye “ne-slave” dimmers, xhuma konke okokufaka kwe-“COM” kwe-LedDimmer komunye nomunye.
QAPHELA UKUFAKA INKOSIKAZI/ISIGQILA
1) Kusetshenziswa ukunikezwa kwamandla okukodwa kwe-dimmer eyodwa, amandla okuqala kuyunithi Eyinhloko futhi ngemva kwalokho kunikeza amandla kuSigqila.
2) Lapho wenza ukunakekelwa ekufakeni qaphela ukuvala amandla kumayunithi eSigqila kuqala bese kuba yiNkosi.
3) Uma amandla eyunithi Eyinhloko engekho, i-Slave izisethela ngokuzenzakalelayo izilungiselelo zangaphambili zefekthri (amandla aku-100%) noma kumasethingi agcinwe ngaphambilini.
QAPHELA KWEZOBUCHWEPHESHE
Ukufakwa:
- Ukufakwa nokugcinwa kokunakekelwa kufanele kwenziwe kuphela ngabasebenzi abaqeqeshiwe ngokuhambisana nemithethonqubo yamanje.
- Umkhiqizo kufanele ufakwe ngaphakathi kwephaneli kagesi evikelwe ekuvukenitages.
- Umkhiqizo kufanele ufakwe ume mpo noma uvundlile ngekhava / ilebula phezulu noma mpo; Ezinye izikhundla azivunyelwe. Akuvunyelwe ukuya phansi phezulu (nekhava / ilebula phansi).
- Gcina uhlukanise amasekhethi ku-230V (LV) futhi amasekethe angewona i-SELV ukusuka kumasekethe ukuya kuvolthi ephansi.tage (SELV) nanoma yikuphi ukuxhumana nalo mkhiqizo. Akuvunyelwe ngokuphelele ukuxhuma, nganoma yisiphi isizathu, ngokuqondile noma ngokungaqondile, i-230V mains vol.tage ebhasini noma kwezinye izingxenye zesekethe.
Ukunikezwa kwamandla kagesi:
- Ukuze unikeze amandla sebenzisa kuphela izinsiza zamandla ze-SELV ezinomkhawulo wamanje, ukuvikelwa kwesekethe emfushane futhi amandla kufanele alinganiswe ngendlela efanele. Uma kusetshenziswa ukunikezwa kwamandla ngamatheminali aphansi, wonke amaphuzu omhlaba ovikelayo (PE = Ukuvikela Umhlaba) kufanele axhunywe kumhlaba wokuvikela ovumelekile futhi oqinisekisiwe.
- Izintambo zokuxhuma phakathi komthombo wamandla “ivolumu ephansitage” futhi umkhiqizo kufanele ulinganiswe ngendlela efanele futhi kufanele uhlukaniswe kuzo zonke izintambo noma izingxenye ku-voltaghhayi SELV. Sebenzisa amakhebuli avaleleke kabili.
- Linganisa ukunikezwa kwamandla komthwalo oxhunywe kudivayisi. Uma ukunikezwa kwamandla kukhulu kakhulu uma kuqhathaniswa nomthamo wamanje omnca kakhulu, faka isivikelo ngokumelene namandla angaphezu kwamanje phakathi kokunikezwa kwamandla kanye nedivayisi.
Umyalo:
- Ubude bezintambo zokuxhuma phakathi kwemiyalelo yendawo (AKUKHO inkinobho ye-Push, 0-10V, 1-10V, Potentiometer noma enye) futhi umkhiqizo kufanele ube ngaphansi kuka-10m; izintambo kufanele zilinganiswe ngendlela efanele futhi kufanele zihlukaniswe kuzo zonke izintambo noma izingxenye ku-voltaghhayi SELV. Sebenzisa izintambo ezivikelwe kabili ezisontekile.
- Ubude nohlobo lwezintambo zokuxhuma ku-BUS SYNC kumele zibe ngaphansi kuka-3m futhi kufanele zihlukaniswe kuzo zonke izintambo noma izingxenye ngevolumu.taghhayi SELV. Kunconywa ukusebenzisa izintambo ezivikelwe kabili ezisontekile.
- Wonke umkhiqizo nesiginali yokulawula kuxhumeke ebhasini nangomyalo wendawo (AKUKHO inkinobho ye-Push, 0-10V, 1-10V, Potentiometer noma enye) kufanele kube yi-SELV (amadivayisi axhunyiwe kufanele abe yi-SELV noma anikeze isignali ye-SELV)
Okuphumayo:
- Ubude bezintambo zokuxhuma phakathi komkhiqizo nemojula ye-LED kufanele bube ngaphansi kuka-10m; izintambo kufanele zilinganiswe ngendlela efanele futhi kufanele zihlukaniswe kuzo zonke izintambo noma izingxenye ku-voltaghhayi SELV. Kungcono ukusebenzisa izintambo ezivikelekile nezisontekile.
UBUCHWEPHESHE BOKUSEBENZA
Idatha ye-DLM1224-1CV
Idatha ye-DLM1248-1CV
I-DALCNET Srl, Ihhovisi elibhalisiwe: Via Lago di Garda, 22 - 36077 Altavilla Vicentina (VI) - Italy
Indlunkulu: Via Lago di Garda, 22 - 36077 Altavilla Vicentina (VI) - Italy
I-VAT: IT04023100235 - Ucingo. +39 0444 1836680 - www.dalcnet.com – info@dalcnet.com
Amadokhumenti / Izinsiza
 |
I-DALC NET DLM1248-1CV Variant DLM Single Channel MultiINPUT Device [pdf] Incwadi Yeziqondiso I-DLM1248-1CV, DLM1224-1CV, DLM Single Channel MultiINPUT Device, DLM1248-1CV Variant DLM Single Channel MultiINPUT Device |
