|
DALC |
Zviri mukati
hide
DLM single channelMulti INPUTDevice Manual |
|
| Zvak. 2022-02-05 |
Yakagadzirwa muItaly
FEATURES
- FADER+DIMMER+DRIVER
- DC Input: 12-24-48 Vdc kana 12-24 Vdc
- MULTI INPUT - Analogic Otomatiki Kuona yeMunzvimbo yekuraira:
- Kazhinji Vhura push-bhatani
- Analogi yekupinda 0-10V
- Analogi yekupinda 1-10V
- Potentiometer 10KOhm - PUSH MENU' - Kugona kuseta:
-Kukosha kwakaderera kwe dimming
– Fade In
– Fade Out - Constant Voltage musiyano weCommon Anode application
- Voltage zvinobuda zveRLC mitoro, DLM1248-1CV musiyano
- Voltage zvinobuda zveR mitoro, DLM1224-1CV musiyano
- Memory function
- Kugadzirisa kupenya kwechiedza chichena kana monochromatic color
- Kugadzirisa kupenya kusvika kwapera
- Kutanga kwakapfava uye kunyorova kumira
- Sync basa - Tenzi/Muranda
- Optimized output curve
- Kunyatsoshanda zvakanaka > 95%
- 100% Inoshanda bvunzo - 5 Makore waranti
Yese uye yakagadziridzwa Device Manual tarisa kune zvevagadziri websaiti: http://www.dalcnet.com
CONSTANT VOLTAGE VARIANTS
Kushandisa: Dimmer
| CODE | Kuisa voltage | Output | Channels | Analogic Auto Detection | |
| DLM1248-1CV | 12-48V DC | 1 x 6,5A | 1 | N° 1 NO Push Button N° 1 analogi chiratidzo 0-10V N° 1 analogi chiratidzo 1-10V N° 1 Potentiometer 10K |
 |
| DLM1224-1CV | 12-24V DC | 1 x 10A | 1 | N° 1 NO Push Button N° 1 analogi chiratidzo 0-10V N° 1 analogi chiratidzo 1-10V N° 1 Potentiometer 10K |
|
Iyo LED dimmer inogadzirwa nekukasira ne:
-Analogic otomatiki Detection yemirairo yemuno yakasetwa seHAPANA Push Bhatani
-Kuderera zvishoma nhanho 1%
DZIviriro
| DLM1248-1CV | DLM1224-1CV | ||
| OTP | Pamusoro pekudzivirira kwekushisa1 |  |
 |
| OVP | Kupfuura voltage protection2 | |
|
| UVP | Under voltage protection2 | |
|
| RVP | Reverse kudzivirira polarity2 | |
|
| IFP | Kupinza fuse kudzivirira2 | |
|
| SCP | Kudzivirirwa kwedunhu pfupi | |
|
| OCP | Vhura kuchengetedzwa kwedunhu | |
|
| CLP | Dziviriro yazvino yemuganhu | |
|
1 Thermal Dziviriro pane inobuda chiteshi kana kune yakanyanya tembiricha. Kupindira kwekupisa kunowanikwa ne transistor.
2 Chete kudzora Logic dziviriro.
REFERENCE MITIRO
| EN 61347-1 | Lamp controlgear - Chikamu 1: General uye kuchengetedza zvinodiwa |
| EN 55015 | Miganhu uye nzira dzekuyerwa kweredhiyo kukanganisa maitiro ekuvhenekesa kwemagetsi nemichina yakafanana |
| EN 61547 | Zvishandiso zvezvinangwa zvekuvhenekesa - EMC kusadzivirirwa zvinodiwa |
| IEC 60929-E.2.1 | Kudzora interface kune inodzoreka ballasts - control by dc voltage - functional specification |
| ANSI E 1.3 | Varaidzo Tekinoroji - Mwenje Kudzora Systems - 0 kusvika 10V Analog Kudzora Kutsanangurwa |
ZVAKAITIKA ZVINHU
| DLM1248-1CV mutsauko | DLM1224-1CV mutsauko | ||
| Constant voltage | Constant voltage | ||
| Mugove voltage | min: 10,8 Vdc .. max: 52,8 Vdc | min: 10,8 Vdc .. max: 26,4 Vdc | |
| Kubuda voltage | = Vin | = Vin | |
| Input current | max 6,5A | max 10A | |
| Output current | 6,5A 3 | 10A 3 | |
| Simba rezita rakatorwa3 | @ 12V | 78 W | 120 W |
| @ 24V | 156 W | 240 W | |
| @ 48V | 312 W | – | |
| Kurasikirwa kwesimba mune yekumira mode | <500mW | <500mW | |
| Mhando Yemutoro | R – L – C | R | |
| Thermal shutdown4 | 150°C | – | |
| Command supply current | 0,5mA (pa1-10V) | 0,5mA (pa1-10V) | |
| Mirairo inodiwa ikozvino (max) | 0,1mA (pa0-10V) | 0,1mA (pa0-10V) | |
| D-PWM dimming frequency | 300Hz | 300Hz | |
| D-PWM sarudzo | 16 zvishoma | 16 zvishoma | |
| D-PWM mhando | 0,1 - 100% | 0,1 - 100% | |
| Storage Temperature | min: -40 max: +60 °C | min: -40 max: +60 °C | |
| Ambient Temperature | min: -10 max: +40 °C | min: -10 max: +40 °C | |
| Wiring | 2.5mm2 yakasimba - 2.5mm2 yakasungwa - 30/12 AWG | 1.5mm2 yakasimba - 1mm2 yakasungwa - 30/16 AWG | |
| Kureba kwekugadzira waya | 5.5 - 6.5 mm | 5 - 6 mm | |
| Dziviriro giredhi | IP20 | IP20 | |
| Casing zvinhu | Plastiki | Plastiki | |
| Packaging unit (zvidimbu / unit) | Single Carton Bhokisi 1 pz | Carton Bhokisi 10pz | |
| Zvokuimba kukura | 44 x 57 x 25 mm | 44 x 57 x 19 mm | |
| Package zviyero | 56 x 68 x 35 mm | 164 x 117x 70 mm | |
| Kurema | 40g | 306g | |
3 Yakanyanya kukosha, zvinoenderana nemamiriro ekufema. Ukoshi uhwu hunoyerwa pa40 ° C, ndiyo yakanyanya ambient tembiricha.
4 Thermal Dziviriro pane inobuda chiteshi kana kune yakanyanya tembiricha. Kupindira kwekupisa kunowanikwa ne transistor.
INSTALLATION
Kuseta chigadzirwa, tevera rairo pamufananidzo pazasi:
1) batanidza magetsi (12-24 Vdc kana 12-48 Vdc zvichienderana nemhando ye dimmer) kune terminal blocks "DC IN" yemudziyo.
2) batanidza iyo LOCAL COMMAND kune terminal inovhara "INPUT" yemudziyo.
3) batanidza iyo LED mune inobuda terminal inovhara "OUT" yemudziyo.
PUSH DIMMER FEATURE
Kusimba uye shanduko yemamiriro (ON / OFF) inodzorwa neNO push bhatani.
| Bhatani | Kusimba |
| Dzvanya | On/Kudzima |
| Click Kaviri | Maximum intensity |
| Kudzvinyirirwa kwenguva refu (>1s) kubva ku OFF | Batidza pa1% (Nguva Yehusiku), wobva wadzika kumusoro/pasi |
| Kudzvinyirirwa kwenguva refu (>1s) kubva ON | Dimmer kumusoro/pasi |
| 15 Dzvanya mu 5 kechipiri-nguva | Pinda muPUSH MENU' |
0-10V & 1-10V & POTENTIOMETER FEATURE
Kusimba kunodzorwa nekupinza voltage variation.
| Bhatani | Function | Kusimba | |
| 0-10V | Dimmer: 0-1V=0% | 10V=100% | |
| 1-10V | |||
| Potentiometer 10K | |||
PUSH MENU'
BASA IRIPO
❖ INONYANYA KUKOSHA KWEKUDIMA
❖ SIMBA-PARAMP (FADE IN)
❖ SIMBA-KUDZIMWA RAMP (KUFUMA)
KUSVIKA KUMENU'
Kana iwe ukabatidza-paiyo LED dimmer, iyo inobuda inoiswa pa100% uye iyo shoma yekudzima iri pa1%.
Kuti uwane iyo menyu yekushandisa, tinya bhatani rekudzvanya ka15 mumasekonzi mashanu.
Kana Mutoro wapenya, uri mu "MENU' 1".
• MENU' 1 – ZVINONYANYA KUKOSHA PAKUDIMA
Kudzvanya kwega kwega kunoita kuti ichinje kukosha kwekushomeka kwe dimming
Kune matanhatu nhanho yehushoma: 0,1%, 1%, 5%, 10%, 20%, 30% uye 100%
Mushure mekuisa hushoma kukosha kwe dimming dzvanya kureba kuti usimbise.
Kupenya kaviri kunosimbisa kuchengetedza uye unogona kuenda ku "MENU' 2"
Ongorora: kana iwe ukaisa iyo yakaderera nhanho ku100%, kana zvigadziriso zvasimbiswa, mudziyo unobuda otomatiki muMENU'.
• MENU' 2 – SIMBA-PARAMP (FADE IN)
Kudzvanya kwega kwega kunoita kuti ichinje simba-pa ramp
Pane mazinga mashanu esimba-pa ramp (FADE IN): Pakarepo, 1 sekondi, 2 masekonzi, 3 masekonzi, 6 masekondi
Mushure mekuisa iyo FADE IN tinya kwenguva refu kuti usimbise.
Kupenya kutatu kunosimbisa kuchengetedza uye unogona kuenda ku "MENU' 3"
• MENU' 3 – SIMBA-KUBVA RAMP (KUFUMA)
Kudzvanya kwega kwega kunoita kuti ichinje simba-off ramp
Pane mazinga mashanu emagetsi-off ramp (FADE OUT): Pakarepo, 1 sekondi, 2 masekonzi, 3 masekonzi, 6 masekonzi.
Mushure mekuisa iyo FADE OUT dzvanya kureba kuti usimbise.
Kupenya kutatu nekukurumidza kunosimbisa kuchengetedza uye unobuda kubva ku "DEVICE MENU"
Paunenge wabuda muMenu', iyo Lamp iyo yakabatana neiyo LED Dimmer inovhura padanho rediki rekudzima rakamboiswa.
MURAIRO WEMUNO
OTOMATIC KUONEKWA YETYPE OF LOCAL COMMAND
Pakuchinja kwekutanga mudziyo unoiswa nekusarudzika kune otomatiki kuzivikanwa kwepush bhatani HAPANA Raira.
❖ KUONGORORA KUONA KWE0/1-10V & POTENTIOMETER COMMAND
Kuziva otomatiki kweanalogi chiratidzo 0/1-10V kana potentiometer kunotanga se 0/1-10V kukosha pakati pe3V ne7V inotumirwa kunze kana kuseta potentiometer ine kukosha kunosanganisirwa kubva pa30% uye 70%.
| MURAIRO 0-10V | MURAIRO 1-10V | POTENTIOMETER |
 |
 |
 |
❖ ZVINOZVIWONEKWA ZVAKAITWA NEKUTI NO PUSH BUTTON COMMAND
Iyo NO push bhatani rinozivikanwa otomatiki mushure mekudzvanya mashanu mukukurumidza kutevedzana.
Mune modhi HAPANA push bhatani, basa ndangariro rinogara richishanda.
| PUSH BUTTON NO |
 |
SYNC INSTALLATION
KUSVIRANA NEKUPIWA KWESIMBA RIMWE
Izvo zvinogoneka kubatanidza akawanda mudziyo wemhuri DLM-1CV pakati pavo mumodhi Master / Muranda
Batanidza rairo yemunharaunda inodiwa kune mudziyo unoshandiswa seTenzi. Batanidza tenzi "TX" chiratidzo kune "RX" masuo evaranda.
ExampTenzi/Muranda:
BASA ROKUGANGANISA NESIMBA RIMWE CHEKUPIWA KWEDIMMER
Muchiitiko chemagetsi akawanda anoshandiswa kupa simba "tenzi" dimmer uye "muranda" dimmers, batanidza ese ma "COM" eiyo LedDimmer kune mumwe nemumwe.
CHERECHEDZA KUTI MASTER/MURANDA INSTALLATION
1) Kushandisa magetsi ega ega dimmer imwe neimwe, yekutanga simba paMaster unit uye mushure meizvozvo kupa simba kuMuranda.
2) Paunenge uchiita kuchengetedza pakugadzika chengetedza kudzima simba kune maSlave units kutanga uyezve kuna Tenzi.
3) Kana simba kuMaster unit risipo, Muranda anomisikidza otomatiki kune default ex-factory marongero (simba pa100%) kana kune zvigadziriso zvakambochengetwa.
CHIDZIDZO CHEMAOKO
Kuiswa:
- Kuisa uye kugadzirisa kunofanirwa kuitwa chete nevashandi vanokwanisa mukuteerana nemirau yazvino.
- Chigadzirwa chacho chinofanira kuiswa mukati memagetsi emagetsi akadzivirirwa kubva pakudarikatages.
- Chigadzirwa chacho chinofanira kuiswa munzvimbo yakatwasuka kana yakatwasuka ine chivharo / label kumusoro kana vertically; Zvimwe zvinzvimbo hazvibvumidzwe. Izvo hazvibvumidzwe kudzika-kumusoro chinzvimbo (ine chivharo / kunyora pasi).
- Ramba wakapatsanura maseketi pa230V (LV) uye maseketi kwete SELV kubva kumaseketi kuenda kune yakaderera vol.tage (SELV) uye kubva kune chero kubatana nechigadzirwa ichi. Izvo zvinorambidzwa zvachose kubatanidza, chero chikonzero chero chipi zvacho, zvakananga kana zvisina kunanga, iyo 230V mains vol.tage kubhazi kana kune dzimwe nzvimbo dzedunhu.
Magetsi:
- Kune magetsi shandisa chete SELV magetsi emagetsi ane mashoma emazuva ano, pfupi dunhu rekudzivirira uye simba rinofanirwa kuyera nemazvo. Muchiitiko chekushandisa magetsi ane zviteshi zvepasi, pfungwa dzose dzepasi rinodzivirira (PE = Dziviriro Pasi) dzinofanira kubatanidzwa kune nyika yekudzivirira uye yakasimbiswa.
- Iwo matambo ekubatanidza pakati pesimba sosi "low voltage" uye chigadzirwa chinofanirwa kuyerwa nemazvo uye chinofanira kuparadzaniswa kubva kune ese waya kana zvikamu pavoltagkwete SELV. Shandisa tambo dzakapetwa kaviri insulated.
- Dimension the power supply for the load yakabatana nemudziyo. Kana magetsi akawandisa kana achienzaniswa neakanyanya kunyudzwa ikozvino, isa dziviriro kubva kune yakawandisa-ikozvino pakati pemagetsi uye mudziyo.
Raira:
- Kureba kwetambo dzekubatanidza pakati pemirairo yemunharaunda (NO Push bhatani, 0-10V, 1-10V, Potentiometer kana imwe) uye chigadzirwa chinofanira kunge chiri pasi pe10m; tambo dzinofanirwa kuyerwa nemazvo uye dzinofanirwa kuparadzaniswa kubva kune ese waya kana zvikamu pavoltagkwete SELV. Shandisa kaviri insulated tambo dzakavharidzirwa uye dzakamonyoroka.
- Hurefu uye rudzi rwetambo dzekubatanidza paBUS SYNC dzinofanirwa kunge dziri pasi pe3m uye dzinofanirwa kuve dzakaparadzaniswa kubva kune yega wiring kana zvikamu pavol.tagkwete SELV. Zvinokurudzirwa kushandisa kaviri insulated shielded uye akamonyoroka tambo.
- Zvese zvigadzirwa uye chiratidzo chekudzora chinobatana mubhazi uye nekuraira kwenzvimbo (HAPANA Push bhatani, 0-10V, 1-10V, Potentiometer kana imwe) inofanira kunge iri SELV (midziyo yakabatana inofanirwa kunge iri SELV kana kupa SELV chiratidzo)
Zvinobuda:
- Kureba kwetambo dzekubatanidza pakati pechigadzirwa uye LED module inofanira kunge iri pasi pe10m; tambo dzinofanirwa kuyerwa nemazvo uye dzinofanirwa kuparadzaniswa kubva kune ese waya kana zvikamu pavoltagkwete SELV. Zviri nani kushandisa tambo dzakavharidzirwa uye dzakamonyoroka.
MACHANICAL DIMENSION
DLM1224-1CV
DLM1248-1CV
DALCNET Srl, Yakanyoreswa hofisi: Via Lago di Garda, 22 - 36077 Altavilla Vicentina (VI) - Italy
Dzimba guru: Via Lago di Garda, 22 - 36077 Altavilla Vicentina (VI) - Italy
VAT: IT04023100235 - Tel. +39 0444 1836680 - www.dalcnet.com – info@dalcnet.com
Zvinyorwa / Zvishandiso
 |
DALC NET DLM1248-1CV Variant DLM Single Channel MultiINPUT Device [pdf] Bhuku reMirayiridzo DLM1248-1CV, DLM1224-1CV, DLM Single Channel MultiINPUT Device, DLM1248-1CV Variant DLM Single Channel MultiINPUT Device |
