DALC NET DLM1248-1CV Variant DLM Ib Channel MultiINPUT Device Instruction Manual

MULTI INPUT - Analogic Tsis Siv Neeg Tshawb Pom ntawm Cov Lus txib hauv zos:
- Nquag Qhib lub laub khawm
- Analog tswv yim 0-10V
- Analog tswv yim 1-10V
- Potentiometer 10KOhm
PUSH MENU' - Muaj peev xwm teeb tsa:
- Tus nqi tsawg kawg ntawm dimming
-Fade In
- Fade Out

Ntev Voltage variant rau Common Anode daim ntawv thov
Voltage outputs rau RLC loads, DLM1248-1CV variant

Voltage outputs rau R loads, DLM1224-1CV variant
Kev ua haujlwm nco

Kho qhov ci ntawm lub teeb dawb lossis xim monochromatic
Kho qhov ci ci kom ua tiav

Mos pib thiab mos nres
Sync muaj nuj nqi – Master/Slave

Optimized tso zis nkhaus
Kev ua haujlwm zoo> 95%

100% Kev Xeem Ua Haujlwm - 5 Xyoo warranty

Rau tag nrho thiab kho tshiab Phau ntawv qhia ntaus ntawv xa mus rau cov neeg tsim khoom webqhov chaw: http://www.dalcnet.com

CONSTANT VOLTAGE VARIANTS

Daim ntawv thov: Dimmer

CODE	Cov lus qhia voltage	Tso zis	Cov channel	Analogic Auto Detection
DLM1248-1CV	DC 12-48V	1 x 6,5a	1	N° 1 NO Push Button N° 1 analog teeb liab 0-10V N° 1 analog teeb liab 1-10V N° 1 Potentiometer 10K
DLM1224-1CV	DC 12-24V	1 x 10a	1	N° 1 NO Push Button N° 1 analog teeb liab 0-10V N° 1 analog teeb liab 1-10V N° 1 Potentiometer 10K

LED dimmer yog tsim los ntawm lub neej ntawd nrog:
- Analogic Tsis Siv Neeg Tshawb Pom ntawm cov lus txib hauv zos teeb tsa tsis muaj khawm khawm
- Dimming yam tsawg kawg nkaus 1%

Kev tiv thaiv

		DLM1248-1CV	DLM1224-1CV
OTP	Tshaj kub tiv thaiv¹
OVP	Tshaj voltage kev tiv thaiv²
UVP	Hauv qab voltage kev tiv thaiv²
RVP	Rov qab polarity tiv thaiv²
IFP	Input fuse tiv thaiv²
SCP	Kev tiv thaiv luv luv
OCP	Qhib Circuit Court tiv thaiv
CLP	Tam sim no txwv kev tiv thaiv

1 Thermal Protection ntawm cov zis channel thaum kub siab. Kev cuam tshuam thermal yog kuaj los ntawm transistor.
2 Tsuas yog tswj Logic tiv thaiv.

REFERENCE STANDARDS

TS EN 61347-1	Lamp Controlgear - Ntu 1: Cov kev cai dav dav thiab kev nyab xeeb
TS EN 55015	Cov kev txwv thiab cov kev ntsuas ntawm cov xov tooj cua cuam tshuam cov yam ntxwv ntawm hluav taws xob teeb pom kev zoo thiab cov cuab yeej zoo sib xws
TS EN 61547	Khoom siv rau lub hom phiaj teeb pom kev zoo - EMC kev tiv thaiv kev tiv thaiv
IEC 60929-E.2.1	Tswj interface rau controllable ballasts - tswj los ntawm dc voltage - functional specification
ANSI E 1.3	Kev Lom Zem Technology - Teeb pom kev zoo Control Systems - 0 txog 10V Analog Control Specification

TECHNICAL SPECIFICATIONS

		DLM1248-1CV Variant	DLM1224-1CV Variant
		Qhov voltage	Qhov voltage
Muab voltage		min: 10,8 Vdc .. max: 52,8 Vdc	min: 10,8 Vdc .. max: 26,4 Vdc
Tso zis voltage		= Vin	= Vin
Input tam sim no		max 6,5 A	max 10 A
Cov zis tam sim no		6,5 A ³	10 A ³
Absorbed nominal hwj chim³	@12v	78 W	120 W
	@24v	156 W	240 W
	@48v	312 W	–
Lub zog poob hauv hom standby		<500 mW	<500 mW
Hom Load		R-L-C	R
Kub kaw⁴		150 ° C	–
Command muab tam sim no		0,5mA (rau 1-10V)	0,5mA (rau 1-10V)
Command xav tau tam sim no (max)		0,1mA (rau 0-10V)	0,1mA (rau 0-10V)
D-PWM dimming zaus		300 Hz	300 Hz
D-PWM Resolution		16bit ib	16bit ib
D-PWM range		0,1 - 100%	0,1 - 100%
Cia Kub		Min: -40 max: +60 ° C	Min: -40 max: +60 ° C
Ambient Kub		Min: -10 max: +40 ° C	Min: -10 max: +40 ° C
Kev xaim		2.5 hli² tuab - 2.5mm² 30/12 AWG	1.5 hli² tuab - 1mm² 30/16 AWG
Hlau npaj ntev		5.5-6.5 hli	5-6 hli
Qib tiv thaiv		IP20	IP20
Casing khoom		Yas	Yas
Packing Unit (Pib / Unit)		Ib lub thawv Box 1 pz	Thawv Box 10pz
Neeg kho tshuab qhov ntev		44 x 57 x 25 mm	44 x 57 x 19 mm
Pob qhov ntev		56 x 68 x 35 mm	164 x 117 x 70 mm
Qhov hnyav		40 g	306 g

3 Tus nqi siab tshaj plaws, nyob ntawm qhov cua txias. Tus nqi no yog ntsuas ntawm 40 ° C, nws yog qhov siab tshaj plaws ambient kub.
4 Thermal Protection ntawm cov zis channel thaum kub siab. Kev cuam tshuam thermal yog kuaj los ntawm transistor.

INSTALLATION

Txhawm rau teeb tsa cov khoom, ua raws li cov lus qhia ntawm daim duab hauv qab no:

1) txuas cov khoom siv hluav taws xob (12-24 Vdc lossis 12-48 Vdc nyob ntawm tus qauv dimmer) rau cov khoom siv davhlau ya nyob twg "DC IN" ntawm lub cuab yeej.
2) Txuas LOCAL COMMAND rau lub davhlau ya nyob twg thaiv "INPUT" ntawm lub cuab yeej.
3) txuas lub LED nyob rau hauv qhov tso zis davhlau ya nyob twg thaiv "OUT" ntawm lub cuab yeej.

PUSH DIMMER FEATURE

Qhov kev siv zog thiab cov xwm txheej hloov pauv (ON/OFF) yog tswj los ntawm NO laub khawm.

Khawm	Kev siv zog
Nyem	On/off
Ob npaug nias	Qhov siab tshaj plaws
Ntev siab (> 1s) los ntawm OFF	Tig ON ntawm 1% (Lub Sij Hawm Hmo Ntuj), ces dimmer nce / nqis
Ntev siab (> 1s) los ntawm ON	Dimmer nce / nqis
15 Nyem rau 5 lub sijhawm thib ob	Nkag mus rau PUSH MENU'

0-10V & 1-10V & POTENTIOMETER FEATURE

Kev siv zog yog tswj los ntawm input voltage kev hloov pauv.

Khawm	Muaj nuj nqi	Kev siv zog
0-10V		Kev tawm tswv yim: 0-1V = 0%	10V = 100%
1-10V
Potentiometer 10K

PUSH MENU'

FUNCTION muaj

❖ QHOV TSEEB NTAWM DIMMING
❖ POWER-ON RAMP (FAJ IN)
❖ POWER-OFF RAMP (FADE OUT)

Nkag mus rau MENU'

Thaum koj tig-rau ntawm LED dimmer, qhov tso zis tau teeb tsa ntawm 100% thiab qhov tsawg kawg ntawm dimming yog 1%.
Txhawm rau nkag mus rau cov ntawv qhia zaub mov, nyem lub pob laub 15 zaug hauv 5 vib nas this lub sijhawm.
Thaum lub Load flashes, koj nyob rau hauv "MENU' 1".

• MENU' 1 – QHOV TSEEB NTAWM DIMMING
Txhua qhov nias ua rau nws hloov qhov tsawg kawg nkaus tus nqi ntawm dimming
Muaj rau qib tsawg kawg nkaus: 0,1%, 1%, 5%, 10%, 20%, 30% thiab 100%

Tom qab teeb tsa tus nqi tsawg kawg ntawm dimming nias ntev kom paub meej.
Lub flashing ob zaug lees paub qhov chaw cia thiab koj tuaj yeem mus rau "MENU' 2"

Nco tseg: yog tias koj teeb tsa qhov tsawg kawg nkaus rau 100%, thaum qhov teeb tsa tau lees paub, lub cuab yeej cia li tawm ntawm MENU'.

• MENU' 2 – POWER-ON RAMP (FAJ IN)
Txhua qhov nias ua rau nws hloov lub hwj chim-on ramp
Muaj tsib theem ntawm lub hwj chim-on ramp (FADE IN): Instantaneous, 1 thib ob, 2 vib nas this, 3 vib nas this, 6 vib nas this

Tom qab teeb tsa FADE IN nias ntev kom paub meej.
Peb flashes paub meej tias qhov chaw cia thiab koj tuaj yeem mus rau "MENU' 3"

• MENU' 3 – POWER-OFF RAMP (FADE OUT)
Txhua qhov nyem ib zaug ua rau nws hloov lub hwj chim tawm ramp
Muaj tsib theem ntawm lub hwj chim tawm ramp (FADE OUT): Instantaneous, 1 thib ob, 2 vib nas this, 3 vib nas this, 6 vib nas this.

Tom qab teeb tsa FADE OUT nias ntev kom paub meej.
Peb lub flashes ceev kom paub meej tias qhov chaw cia thiab koj tawm ntawm "DEVICE MENU"

Thaum koj tawm ntawm Menu', Lamp uas txuas nrog LED Dimmer tig rau ntawm qhov tsawg kawg nkaus ntawm qhov dimming yav dhau los teeb tsa.

TSEEM CEEB

AUTOMATIC DETECTION NTAWM LUB TSEV KAWM NTAWV

Thaum thawj zaug hloov lub cuab yeej tau teeb tsa los ntawm lub neej ntawd mus rau qhov tsis siv neeg lees paub ntawm lub laub khawm NO Command.

❖ AUTOMATIC NTAWM LUB 0/1-10V & POTENTIOMETER COMMANAND

Kev lees paub tsis siv neeg ntawm analog teeb liab 0/1-10V lossis potentiometer pib raws li 0/1-10V tus nqi ntawm 3V thiab 7V raug xa tawm lossis teeb tsa lub potentiometer nrog tus nqi suav nrog los ntawm 30% thiab 70%.

Hwj chim 0-10V	Hwj chim 1-10V	POTENTIOMTER

❖ AUTOMATIC NTAU NTAU NTAWM LUB TSEV KAWM NTAWV TXOJ CAI

Tsis muaj lub laub khawm s tau txheeb xyuas tau tom qab 5 clicks hauv ib ntus sai.
Hauv hom TSIS TXHOB thawb, kev ua haujlwm nco yog ib txwm ua haujlwm.

PUSH BUTTON NO

DALC NET Variant DLM Ib Channel MultiINPUT Ntaus 5D

SYNC INSTALLATION

SYNC FUNCTION nrog tib lub hwj chim SUPPLY
Nws tuaj yeem txuas ntau lub cuab yeej ntawm tsev neeg DLM-1CV ntawm lawv hauv hom Master / qhev
Txuas cov lus txib hauv zos uas xav tau rau lub cuab yeej siv los ua Master. Txuas tus tswv "TX" teeb liab rau "RX" nkag ntawm qhev.
Example ntawm Master/Slave:

SYNC FUNCTION nrog ib lub hwj chim muab rau DIMMER
Nyob rau hauv rooj plaub uas muaj ntau yam khoom siv hluav taws xob siv los siv lub zog "tus tswv" dimmer thiab " qhev" dimmers, txuas tag nrho cov "COM" inputs ntawm LedDimmer rau ib leeg.

CEEB TOOM RAU MASTER/SLAVE INSTALLATION
1) Siv ib lub hwj huam mov txhua dimmer, thawj lub hwj chim ntawm Master unit thiab tom qab ntawd muab lub hwj chim rau tus qhev.
2) Thaum ua kev saib xyuas ntawm lub installation saib xyuas kev kaw lub hwj chim rau cov qhev chav ua ntej thiab tom qab ntawd mus rau Tswv.
3) Thaum lub hwj chim rau Master chav nyob ploj lawm, Tus qhev tau teeb tsa tau rau qhov chaw ua haujlwm qub qub (lub zog ntawm 100%) lossis rau cov chaw khaws tseg yav dhau los.

NCO TSEG KAWM NTAWV

Kev teeb tsa:

Kev txhim kho thiab tu yuav tsum tau ua los ntawm cov neeg ua haujlwm tsim nyog ua raws li cov cai tam sim no.
Cov khoom yuav tsum tau muab tso rau hauv lub vaj huam sib luag hluav taws xob tiv thaiv overvoltages.

Cov khoom yuav tsum tau muab ntsia rau hauv txoj hauj lwm ntsug lossis kab rov tav nrog lub hau / daim ntawv lo rau sab saud lossis ntsug; Lwm txoj haujlwm tsis raug tso cai. Nws tsis raug tso cai rau hauv qab-up txoj hauj lwm (nrog rau lub hau / daim ntawv lo).
Khaws cais cov circuits ntawm 230V (LV) thiab cov circuits tsis SELV los ntawm circuits mus rau qis voltage (SELV) thiab los ntawm kev sib txuas nrog cov khoom no. Nws yog txwv tsis pub txuas rau txhua qhov laj thawj, ncaj qha lossis tsis ncaj qha, 230V mains voltage mus rau lub tsheb npav lossis mus rau lwm qhov ntawm lub voj voog.

Fais fab mov:

Rau cov khoom siv hluav taws xob siv tsuas yog SELV cov khoom siv hluav taws xob uas muaj qhov txwv tam sim no, kev tiv thaiv luv luv thiab lub zog yuav tsum tau ua kom raug. Nyob rau hauv cov ntaub ntawv ntawm kev siv fais fab mov nrog rau hauv av terminals, tag nrho cov ntsiab lus ntawm lub ntiaj teb tiv thaiv (PE = Protection Earth) yuav tsum tau txuas mus rau ib tug siv tau thiab certified tiv thaiv lub ntiaj teb.
Kev sib txuas cables nruab nrab ntawm lub hwj chim qhov chaw "tsawg voltage" thiab cov khoom yuav tsum tau dimensioned kom raug thiab lawv yuav tsum raug cais tawm ntawm txhua txoj hlua lossis qhov chaw ntawm vol.tage not SELV. Siv ob chav insulated cables.
Dimension lub hwj chim mov rau lub load txuas nrog lub cuab yeej. Yog tias cov khoom siv hluav taws xob loj dua piv nrog qhov siab tshaj plaws absorbed tam sim no, ntxig ib qho kev tiv thaiv tiv thaiv dhau tam sim no ntawm cov khoom siv hluav taws xob thiab cov khoom siv.

Hais kom ua:

Qhov ntev ntawm kev sib txuas cables ntawm cov lus txib hauv zos (NO Push khawm, 0-10V, 1-10V, Potentiometer lossis lwm yam) thiab cov khoom yuav tsum tsawg dua 10m; cov cables yuav tsum tau dimensioned kom raug thiab lawv yuav tsum tau cais tawm ntawm txhua txoj hlua los yog qhov chaw ntawm voltage not SELV. Siv ob chav insulated shielded thiab twisted cables.
Qhov ntev thiab hom ntawm kev sib txuas cables ntawm BUS SYNC yuav tsum tsawg dua 3m thiab lawv yuav tsum raug cais tawm ntawm txhua qhov txuas lossis qhov chaw ntawm vol.tage not SELV. Nws yog pom zoo kom siv ob chav insulated shielded thiab twisted cables.

Tag nrho cov khoom thiab cov teeb liab tswj kev sib txuas ntawm lub tsheb npav thiab ntawm cov lus txib hauv zos (Tsis muaj khawm khawm, 0-10V, 1-10V, Potentiometer lossis lwm yam) yuav tsum yog SELV (cov khoom siv txuas nrog yuav tsum yog SELV lossis muab lub teeb liab SELV)

Cov zis:

Qhov ntev ntawm kev sib txuas cables ntawm cov khoom thiab LED module yuav tsum tsawg dua 10m; cov cables yuav tsum tau dimensioned kom raug thiab lawv yuav tsum raug cais tawm ntawm txhua txoj hlua los yog qhov chaw ntawm voltage not SELV. Nws yog qhov zoo dua los siv cov ntaub thaiv npog thiab twisted cables.

MECHANICAL DIMENSION

DLM1224-1CV

DLM1248-1CV

DALCNET Srl, Chaw ua haujlwm rau npe: Via Lago di Garda, 22 - 36077 Altavilla Vicentina (VI) - Ltalis
Lub hauv paus loj: Via Lago di Garda, 22 - 36077 Altavilla Vicentina (VI) - Ltalis
VAT: IT04023100235 - Tel. +39 0444 1836680 - www.dalcnet.com – yog info@dalcnet.com

Cov ntaub ntawv / Cov ntaub ntawv

DALC NET DLM1248-1CV Variant DLM Ib Channel MultiINPUT Device [ua pdf] Phau ntawv qhia
DLM1248-1CV, DLM1224-1CV, DLM Ib Channel MultiINPUT Device, DLM1248-1CV Variant DLM Ib Channel MultiINPUT Ntaus

Cov ntaub ntawv

Cov neeg siv phau ntawv

DLM ib channel

Multi INPUT

NTA