|
I-DALC |
Imixholo
fihla
I-DLM itshaneli enyeIINPUT ezininziIncwadi yesixhobo |
|
| ISityhi 2022-02-05 |
Yenziwe eItali
IIMBONAKALO
- FADER+DIMMER+Driver
- Igalelo le-DC: 12-24-48 Vdc okanye 12-24 Vdc
- I-MULTI INPUT-I-Analogic Automatic Ukufunyanwa komyalelo wasekhaya:
– Ngesiqhelo Vula push-iqhosha
– igalelo Analog 0-10V
– igalelo Analog 1-10V
– Potentiometer 10KOhm - PUSH MENU' – Kunokwenzeka ukuseta:
– Ubuncinci bexabiso lobumnyama
- Ngena ngaphakathi
- Iyatshonela - Qho ngeVoltage ezahlukeneyo izicelo Anode Common
- Umqulutage iziphumo zemithwalo ye-RLC, i-DLM1248-1CV eyahlukileyo
- Umqulutage iziphumo zemithwalo ye-R, i-DLM1224-1CV eyahlukileyo
- Umsebenzi wememori
- Ukulungelelanisa ukukhanya kokukhanya okumhlophe okanye umbala we-monochromatic
- Ukulungelelanisa ukukhanya ukuze kugqitywe
- Isiqalo esithambileyo kunye nokuyeka okuthambileyo
- Umsebenzi wongqamaniso – Inkosi/Ikhoboka
- Igophe lemveliso elungiselelweyo
- Ukusebenza okuqhelekileyo > 95%
- 100% Uvavanyo olusebenzayo - iwaranti yeminyaka emi-5
Ngokuba yonke kwaye ihlaziywe Incwadi yesixhobo bhekisa kumvelisi webindawo: http://www.dalcnet.com
UMQULU ONGQINISOTAGE IZAHLUKO
Isicelo: Dimmer
| IKHOWUDI | Igalelo voltage | Isiphumo | Imijelo | Ukufunyanwa okuzenzekelayo kwe-Analogic | |
| I-DLM1248-1CV | I-12-48V DC | 1 x 6,5A | 1 | N° 1 HAYI iQhosha lokucofa N ° 1 isignali ye-analog 0-10V N ° 1 isignali ye-analog 1-10V N° 1 Isixhobo sokulinganisa amandla 10K |
 |
| I-DLM1224-1CV | I-12-24V DC | 1 x 10A | 1 | N° 1 HAYI iQhosha lokucofa N ° 1 isignali ye-analog 0-10V N ° 1 isignali ye-analog 1-10V N° 1 Isixhobo sokulinganisa amandla 10K |
|
I-LED dimmer iveliswa ngokungagqibekanga nge:
-UkuFunyaniswa okuzenzekelayo kwe-Analogic yomyalelo wasekhaya oseti NJENGOKO AKUKHO Iqhosha lokutyhala
-Ukunciphisa ubuncinci benqanaba le-1%
UKHUSELEKO
| I-DLM1248-1CV | I-DLM1224-1CV | ||
| OTP | Ngaphezulu kokhuseleko lobushushu1 |  |
 |
| I-OVP | Ngaphezulu kwevoltage ukhuseleko2 | |
|
| UVP | Ngaphantsi kwevoltage ukhuseleko2 | |
|
| I-RVP | Reverse ukhuselo polarity2 | |
|
| IFP | Ukhuseleko lwe-fuse2 | |
|
| I-SCP | Ukukhuselwa kwesiphaluka esifutshane | |
|
| I-OCP | Vula ukhuseleko lwesekethe | |
|
| CLP | Ukhuseleko lomda lwangoku | |
|
I-1 yoKhuseleko lwe-Thermal kwitshaneli yokuphuma kwimeko yokushisa okuphezulu. Ukungenelela kwe-thermal kufunyenwe yi-transistor.
2 Lawula kuphela ukhuseleko lweNgqiqo.
IMIGANGATHO YEREferensi
| EN 61347-1 | Lamp isixhobo sokulawula – iCandelo 1: Iimfuno ngokubanzi kunye nokhuseleko |
| EN 55015 | Imida kunye neendlela zokulinganisa iimpawu zokuphazamiseka kwerediyo zokukhanyisa kombane kunye nezixhobo ezifanayo |
| EN 61547 | Izixhobo zeenjongo zokukhanyisa ngokubanzi - iimfuno zokugonywa kwe-EMC |
| IEC 60929-E.2.1 | Ujongano lolawulo lwee-ballasts ezilawulekayo - ulawulo nge-dc voltage – iinkcukacha zokusebenza |
| I-ANSI E 1.3 | ITekhnoloji yoLonwabo - IiNkqubo zokuLawula ukuKhanya - i-0 ukuya kwi-10V yeNkcazo yoLawulo lwe-Analog |
INGCACISO YOBUGCISA
| Umfanekiso we-DLM1248-1CV | Umfanekiso we-DLM1224-1CV | ||
| I-vol rhoqotage | I-vol rhoqotage | ||
| Ukubonelela ngevoltage | min: 10,8 Vdc .. max: 52,8 Vdc | min: 10,8 Vdc .. max: 26,4 Vdc | |
| Iziphumo voltage | = Vin | = Vin | |
| Ungeniso lwangoku | ubuninzi 6,5A | ubuninzi 10A | |
| Imveliso yangoku | 6,5A 3 | 10A 3 | |
| Afunxa amandla aqhelekileyo3 | @ 12V | 78 W | 120 W |
| @ 24V | 156 W | 240 W | |
| @ 48V | 312 W | – | |
| Ukulahlekelwa kwamandla kwimowudi yokulinda | <500mW | <500mW | |
| Uhlobo lomthwalo | R – L – C | R | |
| Ukucima ubushushu4 | 150°C | – | |
| Unikezelo lomyalelo lwangoku | 0,5mA (nge-1-10V nganye) | 0,5mA (nge-1-10V nganye) | |
| Umyalelo ofunekayo ngoku (ubukhulu) | 0,1mA (nge-0-10V nganye) | 0,1mA (nge-0-10V nganye) | |
| D-PWM dimming frequency | 300Hz | 300Hz | |
| Isisombululo se-D-PWM | 16 bit | 16 bit | |
| Uluhlu lwe-D-PWM | 0,1 - 100% | 0,1 - 100% | |
| Ubushushu boGcino | umz: -40 max: +60 °C | umz: -40 max: +60 °C | |
| Ubushushu obugciniwe | umz: -10 max: +40 °C | umz: -10 max: +40 °C | |
| Iintambo | 2.5mm2 eqinile - 2.5mm2 ixingile – 30/12 AWG | 1.5mm2 eqinile - 1mm2 ixingile – 30/16 AWG | |
| Ubude bokulungiselela ucingo | 5.5 - 6.5 mm | 5 - 6 mm | |
| Ibakala lokhuseleko | IP20 | IP20 | |
| Izinto zeCasing | Iplastiki | Iplastiki | |
| Iyunithi yokuPakisha (amaqhekeza/iyunithi) | Ibhokisi yeKhathoni enye 1 pz | Ibhokisi yebhokisi 10pz | |
| Ubukhulu boomatshini | 44 x 57 x 25 mm | 44 x 57 x 19 mm | |
| Imilinganiselo yephakheji | 56 x 68 x 35 mm | 164 x 117x 70 mm | |
| Ubunzima | 40g | 306g | |
3 Ixabiso eliphezulu, elixhomekeke kwiimeko zomoya. Eli xabiso lilinganiswa kwi-40 ° C, liqondo lobushushu eliphezulu le-ambient.
I-4 yoKhuseleko lwe-Thermal kwitshaneli yokuphuma kwimeko yokushisa okuphezulu. Ukungenelela kwe-thermal kufunyenwe yi-transistor.
UKUFAKWA
Ukuseta imveliso, landela lo mfanekiso ungezantsi:
1) qhagamshela umbane (12-24 Vdc okanye 12-48 Vdc ngokuxhomekeka kwimodeli ye-dimmer) kwiibhloko ze-terminal "DC IN" yesixhobo.
2) qhagamshela i-LOCAL COMMAND kwiibhloko ze-terminal "INPUT" yesixhobo.
3) qhagamshela i-LED kwiibhloko ze-terminal output "OUT" yesixhobo.
TYHALA iDIMMER FEATURE
Ubunzulu kunye nokutshintsha kwesimo (ON / OFF) zilawulwa yi-NO iqhosha lokutyhala.
| Iqhosha | Ukuqina |
| Cofa | Layita icima |
| Cofa kabini | Ubukhulu obukhulu |
| Uxinzelelo olude (>1s) ukusuka OFF | Vula nge-1% (iXesha lasebusuku), emva koko dimmer up/down |
| Uxinzelelo olude (>1s) ukusuka kwi-ON | Dimmer phezulu/ezantsi |
| 15 Cofa kwi-5 okwesibini | Ngena kwi-PUSH MENU' |
0-10V & 1-10V & POTENTIOMETER FEATURE
Ukuqina kulawulwa ngumthamo wokufakatage ukwahluka.
| Iqhosha | Umsebenzi | Ukuqina | |
| 0-10V | Dimmer: 0-1V=0% | 10V=100% | |
| 1-10V | |||
| I-potentiometer 10K | |||
PUSH MENU'
UMSEBENZI UKHONA
❖ IXABISO LOMNCINCI LOKUFINYEZWA
❖ AMANDLA-KU-RAMP (NGENA NGAPHAKATHI)
❖ UKUVALWA KWAMANDLA RAMP (IYATSHONELA)
FIKELELA KWIMENU'
Xa uvula i-LED dimmer, imveliso ibekwe kwi-100% kwaye ubuncinci be-dimming bukwi-1%.
Ukufikelela kwimenyu yesixhobo, cofa iqhosha lokutyhala izihlandlo ezili-15 kwimizuzwana emi-5.
Xa uMlayisho udanyaza, uku-“MENU' 1”.
• IMENU' 1 – UBUNCINANE IXABISO LOKWENZIWA KOMFIHLO
Unqakrazo ngalunye luyenza itshintshe ubuncinci bexabiso lokufiphaza
Kukho amanqanaba amathandathu ubuncinane: 0,1%, 1%, 5%, 10%, 20%, 30% kunye 100%
Emva kokuseta elona xabiso lisezantsi lobumnyama cinezela ixesha elide ukuqinisekisa.
Ukudanyaza kabini kuqinisekisa ugcino kwaye ungaya kwi "MENU' 2"
Qaphela: ukuba umisela elona nqanaba lisezantsi ukuya kwi-100%, nje ukuba useto luqinisekisiwe, isixhobo siphuma ngokuzenzekelayo kwi-MENU'.
• IMENU' 2 – AMANDLA-KU-RAMP (NGENA NGAPHAKATHI)
Unqakrazo ngalunye luyenza itshintshe amandla-kwi-ramp
Kukho amanqanaba amahlanu amandla-on ramp (FADE IN): Ngoko nangoko, 1 umzuzwana, 2 imizuzwana, 3 imizuzwana, 6 imizuzwana
Emva kokuseta i-FADE IN cofa ixesha elide ukuze uqinisekise.
Izibane ezithathu ziqinisekisa ugcino kwaye ungaya kwi “MENU' 3”
• IMENU' 3 – AMAMANDLA-VAMSHA RAMP (IYATSHONELA)
Unqakrazo ngalunye luyenza itshintshe amandla-off ramp
Kukho amanqanaba amahlanu amandla-off ramp (FADE OUT): Ngoko nangoko, 1 isekhondi, 2 imizuzwana, 3 imizuzwana, 6 imizuzwana.
Emva kokuseta i-FADE OUT cofa ixesha elide ukuze uqinisekise.
Izibane ezikhawulezayo ezintathu ziqinisekisa ugcino kwaye uphuma kwi "DEVICE MENU"
Xa uphumile kwiMenyu, i-Lamp eqhagamshelwe kwi-LED Dimmer ivula kwinqanaba elisezantsi lobumnyama obusetiwe ngaphambili.
UMYALELO WENGINGQI
UKUFUMANA NGOKUZENZAKALELAYO UHLOBO LOMYALELO WENGINGQI
Kutshintsho lokuqala isixhobo sisetwa ngokungagqibekanga ukuqondwa ngokuzenzekelayo kweqhosha lokutyhala HAYI Umyalelo.
❖ UKUFUMANA NGOKUZENZAKALELAYO KOMYALELO 0/1-10V & POTENTIOMETER
Ukuqaphela ngokuzenzekelayo uphawu lwe-analog 0 / 1-10V okanye i-potentiometer iqala njengexabiso le-0 / 1-10V phakathi kwe-3V kunye ne-7V ithunyelwa ngaphandle okanye ibeka i-potentiometer ngexabiso elibandakanyiweyo ukusuka kwi-30% kunye ne-70%.
| UMYALELO 0-10V | UMYALELO 1-10V | I-POTENTIOMETER |
 |
 |
 |
❖ UKUFUMANEKA NGOKUZENZAKALELAYO KOMYALELO ONGAQHUBEKILEYO
Iqhosha le-NO lokutyhala lichongwe ngokuzenzekelayo emva konqakrazo lwe-5 ngokulandelelana ngokukhawuleza.
Kwimowudi AYIKHO iqhosha lokutyhala, inkumbulo yomsebenzi isoloko isebenza.
| TYHALA IQHOSHA INOMBOLO |
 |
UKUFAKA SYNC
THUMELA UMSEBENZI KUNYE NOBONELELO WAMANDLA OMNYE
Kuyenzeka ukudibanisa izixhobo ezininzi zosapho lwe-DLM-1CV phakathi kwazo kwimowudi ye-Master/Slave
Qhagamshela umyalelo wobulali ofunekayo kwisixhobo esisetyenziswa njengeMaster. Qhagamshela isiginali ye-master "TX" kwi-"RX" yokungena yamakhoboka.
Example yeNkosi/ikhoboka:
UKUSEBENZA KWAMANDLA OMNYE NGE-DIMMER
Kwimeko apho izixhobo zombane ezininzi zisetyenziselwa ukwenza amandla "master" dimmer kunye ne "slave" dimmers, qhagamshela onke "COM" amagalelo eLedDimmer omnye komnye.
INQAKU LOKUFAKWA KWENKOSIKAZI/KAMAKHOBOKA
I-1) Ukusebenzisa unikezelo lwamandla omnye kwi-dimmer enye, amandla okuqala kwiyunithi ye-Master kwaye emva koko inike amandla kuKhoboka.
2) Xa usenza ugcino kufakelo luthathele ingqalelo ukuvala umbane kwiiyunithi zamaKhoboka kuqala kwaye emva koko kwiNkosi.
3) Xa amandla kwi-Master unit engekho, i-Slave ibeka ngokuzenzekelayo kwimimiselo yangaphambili yefektri (amandla kwi-100%) okanye kwimimiselo egcinwe ngaphambili.
INQAKU LOBUGCISA
Ukuhlohla:
- Ufakelo kunye nokugcinwa kufuneka kwenziwe kuphela ngabasebenzi abaqeqeshiweyo ngokuhambelana nemimiselo yangoku.
- Imveliso kufuneka ifakwe ngaphakathi kwiphaneli yombane ekhuselweyo ekugqithisenitages.
- Imveliso kufuneka ifakwe kwindawo ethe nkqo okanye ethe tye kunye nesigqubuthelo / ileyibheli phezulu okanye ngokuthe nkqo; Ezinye izikhundla azivumelekanga. Akuvumelekanga ukuma ezantsi ukuya phezulu (kunye nesigqubuthelo / ilebhile phantsi).
- Gcina zahluliwe iisekethe kwi-230V (LV) kunye neesekethe ezingekho SELV ukusuka kwiisekethe ukuya kwivolthi ephantsi.tage (SELV) kunye nakulo naluphi na unxibelelwano kule mveliso. Akuvumelekanga ngokupheleleyo ukudibanisa, nangasiphi na isizathu, ngokuthe ngqo okanye ngokungathanga ngqo, i-230V mains vol.tage ebhasini okanye kwezinye iindawo zesekethe.
Ukunikezwa Amandla:
- Ukubonelela ngombane sebenzisa kuphela unikezelo lwamandla lwe-SELV olunombane oqingqiweyo, ukhuseleko lwesekethe emfutshane kunye nombane kufuneka ulinganiswe ngokuchanekileyo. Kwimeko yokusetyenziswa kwamandla kunye neeterminals zomhlaba, zonke iingongoma zomhlaba okhuselayo (PE = uKhuseleko loMhlaba) kufuneka zidibaniswe nomhlaba okhuselekileyo kunye noqinisekisiweyo.
- Iintambo zoqhagamshelwano phakathi komthombo wamandla “umthamo ophantsitage” kwaye imveliso kufuneka ilinganiswe ngokufanelekileyo kwaye kufuneka ibe yodwa kuzo zonke iintambo okanye iinxalenye ezikwivolthitaghayi SELV. Sebenzisa iintambo ezigqunywe kabini.
- Umlinganiselo wonikezelo lwamandla kumthwalo oqhagamshelwe kwisixhobo. Ukuba unikezelo lwamandla lugqithise kakhulu xa kuthelekiswa nowona msinga ufunxayo uphezulu, faka ukhuseleko ngokuchasene nombane ogqithisileyo phakathi konikezelo lwamandla kunye nesixhobo.
Umyalelo:
- Ubude beentambo zokuxhuma phakathi kwemiyalelo yendawo (AKUKHO iqhosha lokutyhala, i-0-10V, i-1-10V, i-Potentiometer okanye enye) kunye nemveliso kufuneka ibe ngaphantsi kwe-10m; iintambo kufuneka zibe nomlinganiselo ngokuchanekileyo kwaye kufuneka zibe zodwa kuzo zonke iintambo okanye iinxalenye ezikwivolthitaghayi SELV. Sebenzisa iintambo ezimbini ezigqunyiweyo nezijijekileyo.
- Ubude kunye nodidi lweentambo zoqhagamshelo kwi-BUS SYNC kufuneka zibe ngaphantsi kwe-3m kwaye kufuneka zibe zodwa kuzo zonke iintambo okanye iinxalenye ezikwivolthi.taghayi SELV. Kucetyiswa ukuba kusetyenziswe iintambo ezimbini ezikhuselweyo nezijijekileyo.
- Yonke imveliso kunye nesignali yokulawula idibanisa kwibhasi kunye nomyalelo wendawo (AKUKHO iqhosha lokutyhala, i-0-10V, i-1-10V, i-Potentiometer okanye enye) kufuneka ibe yi-SELV (izixhobo ezixhunyiwe kufuneka zibe yi-SELV okanye zinikeze uphawu lwe-SELV)
Iziphumo:
- Ubude beentambo zokudibanisa phakathi kwemveliso kunye nemodyuli ye-LED kufuneka ibe ngaphantsi kwe-10m; iintambo kufuneka zibe nomlinganiselo ngokuchanekileyo kwaye kufuneka zibe zodwa kuzo zonke iintambo okanye iinxalenye ezikwivolthitaghayi SELV. Kukhethwa ukuba usebenzise iintambo ezikhuselweyo nezijijekileyo.
UMLINGANISO WOOMATSHINI
I-DLM1224-1CV
I-DLM1248-1CV
I-DALCNET Srl, i-ofisi ebhalisiweyo: Via Lago di Garda, 22 - 36077 Altavilla Vicentina (VI) - Italy
Ikomkhulu: Via Lago di Garda, 22 - 36077 Altavilla Vicentina (VI) - Italy
I-VAT: IT04023100235 - Umnxeba. +39 0444 1836680- www.dalcnet.com – info@dalcnet.com
Amaxwebhu / Izibonelelo
 |
I-DALC NET DLM1248-1CV Eyahlukileyo ye-DLM Isixhobo esinye sesixhobo seMultiINPUT [pdf] Incwadi Yomyalelo DLM1248-1CV, DLM1224-1CV, DLM Single Channel MultiINPUT Isixhobo, DLM1248-1CV ezahlukeneyo DLM Single Channel MultiINPUT Isixhobo |
