LS XB Series Programmable Logic Controller
Ulwazi Lomkhiqizo
Imininingwane:
- C/N: 10310001095
- Umkhiqizo: Isilawuli Sengqondo Ehlelekayo
- I-XGB CPU (E)
- Amamodeli: XB(E)C-DR10/14/20/30E, XB(E)C-DN10/14/20/30E, XB(E)C-DP10/14/20/30E
Imiyalo yokusetshenziswa komkhiqizo
Ukufakwa Kwesoftware ye-XG5000:
Qinisekisa ukuthi unenguqulo ye-V4.01 yesofthiwe ye-XG5000.
Uxhumano lwe-PMC-310S:
Xhuma usebenzisa isixhumi esibonakalayo se-RS-232C.
Ukufakwa Okungokoqobo:
Faka i-PLC endaweni efanele ngokulandela ubukhulu obunikeziwe (ngo-mm). Qinisekisa ukungena komoya ngendlela efanele kanye nendawo yokuyinakekela.
Izixhumanisi zezintambo:
Landela umdwebo wezintambo onikezwe ne-PLC. Qinisekisa ukuxhumeka okulungile kokunikezwa kwamandla, okokufaka/imishini yokukhiphayo, nezindawo zokuxhumana.
Inika amandla:
Sebenzisa amandla ngaphakathi kwevolumu eshiwotage ububanzi. Hlola izinkomba zamandla ezifanele kanye nokuqaliswa kwesistimu.
Ukuhlela:
Sebenzisa isofthiwe ye-XG5000 ukuhlela ingqondo ye-PLC ngokusekelwe kuzidingo zakho zohlelo lokusebenza. Hlola uhlelo kahle ngaphambi kokusetshenziswa.
FAQ
- Iyiphi inguqulo yesofthiwe enconywayo yokuhlela?
Inguqulo yesofthiwe enconyiwe yi-V4.01 yesofthiwe ye-XG5000. - Kufanele ngixhume kanjani i-PMC-310S?
Xhuma i-PMC-310S usebenzisa isixhumi esibonakalayo se-RS-232C. - Yiziphi izimo zemvelo zokusebenzisa i-PLC?
Izinga lokushisa elisebenzayo lingu-25°C kuya ku-70°C, nebanga lomswakamo lika-5% kuya ku-95% RH.
Lo mhlahlandlela wokufaka uhlinzeka ngolwazi olulula lomsebenzi wokulawula kwe-PLC. Sicela ufunde ngokucophelela leli phepha ledatha namamanyuwali ngaphambi kokusebenzisa imikhiqizo. Ikakhulukazi funda izinyathelo zokuphepha futhi uphathe imikhiqizo ngendlela efanele.
Izinyathelo Zokuphepha
Incazelo yesixwayiso nombhalo wokuxwayisa
- ISEXWAYISO
ISEXWAYISO sibonisa isimo esingaba yingozi, okuthi uma singagwenywa, siphumele ekufeni noma ekulimaleni okubi kakhulu - ISEXWAYISO
UKUQAPHELA kubonisa isimo esingaba yingozi, okuthi uma singagwenywa, siphumele ekulimaleni okuncane noma okulingene. Ingase futhi isetshenziselwe ukuxwayisa ngemikhuba engaphephile - ISEXWAYISO
- Ungaxhumani namatheminali ngenkathi kusetshenziswa amandla.
- Vikela umkhiqizo ekungenelweni yindaba yensimbi yangaphandle.
- Ungalisebenzisi kabi ibhethri (ukushaja, ukuqaqa, ukushaya, kufushane, ukusoda)
- ISEXWAYISO
- Qiniseka ukuthi ubheka ivolumu elinganisiwetage kanye nokuhlelwa kwetheminali ngaphambi kokufakwa kwezintambo
- Uma ufaka izintambo, qinisa isikulufu sebhulokhi yetheminali ngobubanzi betorque obushiwo
- Ungafaki izinto ezivuthayo endaweni ezungezile
- Ungayisebenzisi i-PLC endaweni yokudlidliza okuqondile
- Ngaphandle kwabasebenzi besevisi abangochwepheshe, Ungawuhlakazi noma ulungise noma uguqule umkhiqizo
- Sebenzisa i-PLC endaweni ehlangabezana nemininingwane evamile equkethwe kule datha yedatha.
- Qiniseka ukuthi umthwalo wangaphandle awudluli isilinganiso semodyuli yokukhipha.
- Lapho ulahla i-PLC nebhethri, kuphathe njengodoti wezimboni.
Indawo yokusebenza
Ukuze ufake, bheka izimo ezingezansi.
| Cha | Into | Ukucaciswa | Okujwayelekile | ||||
| 1 | I-Ambient temp. | 0 ~ 55℃ | – | ||||
| 2 | Izinga lokushisa lesitoreji. | -25 ~ 70℃ | – | ||||
| 3 | Umswakama we-ambient | 5 ~ 95%RH, ayinciphisi | – | ||||
| 4 | Umswakama wesitoreji | 5 ~ 95%RH, ayinciphisi | – | ||||
|
5 |
Ukudlidliza Ukumelana |
Ukudlidliza ngezikhathi ezithile | – | – | |||
| Imvamisa | Ukusheshisa | Ampukufunda | Izikhathi |
I-IEC 61131-2 |
|||
| 5≤f<8.4㎐ | – | 3.5 mm | Izikhathi eziyi-10 ohlangothini ngalunye lwe
X kanye no-Z |
||||
| 8.4≤f≤150㎐ | 9.8㎨(1g) | – | |||||
| Ukudlidliza okuqhubekayo | |||||||
| Imvamisa | Imvamisa | Ampukufunda | |||||
| 5≤f<8.4㎐ | – | 1.75 mm | |||||
| 8.4≤f≤150㎐ | 4.9㎨(0.5g) | – | |||||
Ukucaciswa kokusebenza
Lokhu ukucaciswa kokusebenza kwe-XGB. Ukuze uthole imininingwane eyengeziwe, bheka imanuwali ehlobene.
| Into | Ukucaciswa | |||
| Indlela yokusebenza | Ukusebenza okuphindaphindayo, ukusebenza komjikelezo ongaguquki,
Ukuphazamisa ukusebenza, ukuskena kwenkathi njalo |
|||
| Indlela yokulawula ye-I/O | Skena ukucutshungulwa kweqoqo elivumelanisiwe (indlela yokuvuselela)
Indlela eqondile ngesiyalezo |
|||
| Isivinini sokusebenza | Umyalelo oyisisekelo: 0.24㎲/isinyathelo | |||
| Isikhala sokunwetshwa esiphezulu | Main+Inketho (inketho 1slot: 10/14 uhlobo lwamaphoyinti, inketho 2slot: uhlobo lwamaphoyinti angama-20/30) |
|||
|
umsebenzi |
Ukuqaliswa | 1 | ||
| Umjikelezo olungisiwe | 1 | |||
| Iphoyinti langaphandle | Ubukhulu. 8 | |||
| Idivayisi yangaphakathi | Ubukhulu. 4 | |||
| Imodi yokusebenza | GIJIMA, YEKA | |||
| Ukuzihlola | Ukubambezeleka kokusebenza, inkumbulo engavamile, i-I/O engavamile | |||
| Imbobo yohlelo | I-RS-232C(Loader) | |||
| Indlela yokugcina idatha ekuhlulekeni kwamandla | Ukusetha indawo ye-latch kupharamitha eyisisekelo | |||
| Umsebenzi Owakhelwe ngaphakathi | Umsebenzi we-Cnet I/F | Iphrothokholi ezinikezele, iphrothokholi ye-Modbus
Iphrothokholi echazwe ngumsebenzisi |
||
| Ikhetha imbobo eyodwa phakathi kwembobo ye-RS-232C 1 kanye
Imbobo ye-RS-485 1 ngepharamitha |
||||
| I-High Speed Counter | Ukusebenza | Isigaba esingu-1 : 4㎑ 4 iziteshi 2-isigaba : 2㎑ 2 iziteshi | ||
|
Imodi yekhawunta |
4 amamodi wokubala asekelwa ngokusekelwe ku-pulse okokufaka kanye nendlela ye-INC/DEC
· Imodi yokusebenza kwe-pulse engu-1 : INC/DEC ukubala ngohlelo · Imodi yokusebenza kwe-pulse engu-1 : INC/DEC ukubala ngesigaba B sokufaka ishayela · Imodi yokusebenza kwe-pulse engu-2 : INC/DEC count by ipulse input · Imodi yokusebenza kwe-pulse engu-2 : INC/DEC count by umehluko wesigaba |
|||
| ukusebenza | Ikhawunta ye-32bit esayiniwe | |||
| Umsebenzi | · Ukusetha ngaphambilini kwangaphakathi/kwangaphandle · Ikhawunta ye-Latch
· Qhathanisa okukhiphayo · Inombolo yokuzungezisa ngesikhathi seyunithi |
|||
| I-Pulse catch | 50㎲ 4 amaphuzu | |||
| Ukuphazamiseka kwephoyinti langaphandle | 4 amaphuzu: 50㎲ | |||
| Isihlungi sokufaka | Ikhetha phakathi kuka-1,3,5,10,20,70,100㎳ (Kumojula ngayinye) | |||
Isoftware Yokusekela Esebenzayo
Ngokucushwa kwesistimu, inguqulo elandelayo iyadingeka.
Isoftware ye-XG5000: V4.01 noma ngaphezulu
Izesekeli kanye Nemininingwane Yekhebula
Hlola insiza (Oda ikhebuli uma kudingeka)
I-PMC-310S : Ikhebuli yokuxhuma (yokulanda) engu-RS-232
Igama lezingxenye kanye nobukhulu (mm)
Lena ingxenye engaphambili ye-CPU. Bheka igama ngalinye uma ushayela isistimu. Ukuze uthole ulwazi olwengeziwe, bheka imanuwali yomsebenzisi.
- Ibhulokhi Yetheminali Yokuxhumana eyakhelwe ngaphakathi
- Ibhulokhi yetheminali yokokufaka
- Isimo sokusebenza se-LED
- I-LED yesimo sokufaka
- Isimo sokuphuma kwe-LED
- Umnikazi webhodi lokukhetha
- I-O/S yokushintsha idiphu yemodi
- RUN/MISA ukushintsha kwemodi
- I-PADT Isixhumi
- Ibhulokhi yetheminali yamandla
- Ibhulokhi yetheminali yokuphumayo
- 24V Okukhiphayo (amandla amancane)
Ubukhulu(mm)
| Imojuli | W | D | H |
| XB(E)C-DR(N)(P)10/14E | 97 | 64 | 90 |
| XB(E)C-DR(N)(P)20/30E | 135 | 64 | 90 |
Izintambo
Izintambo zamandla
- Esimeni lapho ukuguqulwa kwamandla kukhulu kunobubanzi bezinga elijwayelekile, xhuma ivolumu engaguqukitage transformer
- Xhuma amandla anomsindo omncane phakathi kwezintambo noma phakathi komhlaba. Esimeni sokuba nomsindo omkhulu, xhuma isiguquli esihlukanisayo noma isihlungi somsindo.
- amandla e-PLC, idivayisi ye-I/O neminye imishini kufanele ihlukaniswe.
- Sebenzisa umhlaba ozinikele uma kungenzeka. Esimeni sokusebenza koMhlaba, sebenzisa umhlaba wesigaba esi-3 (ukumelana nomhlaba 100 Ω noma ngaphansi) futhi Sebenzisa ikhebula lomhlaba elingaphezu kuka-2 mm2. Uma ukusebenza okungavamile kutholakala ngokusho komhlaba, hlukanisa umhlaba
Iwaranti
- Isikhathi sewaranti yizinyanga ezingama-36 kusukela ngosuku lokukhiqiza.
- Ukuxilongwa kokuqala kwamaphutha kufanele kwenziwe ngumsebenzisi. Nokho, ngesicelo, i-LSELECTRIC noma um(abamele) bayo bangenza lo msebenzi ngenkokhelo. Uma imbangela yephutha kutholakala ukuthi kuwumthwalo we-LS ELECTRIC, le sevisi izoba mahhala.
- Okukhishiwe kuwaranti
- Ukushintshwa kwezingxenye ezisebenzisekayo nezikhawulelwe ukuphila (isb. amalayidi, amafuse, ama-capacitor, amabhethri, ama-LCD, njll.)
- Ukwehluleka noma umonakalo odalwe izimo ezingafanele noma ukuphatha ngaphandle kwalezo ezishiwo kumanuwali yomsebenzisi
- Ukwehluleka okubangelwa izici zangaphandle ezingahlobene nomkhiqizo
- Ukwehluleka okudalwe izinguquko ngaphandle kwemvume ye-LS ELECTRIC
- Ukusetshenziswa komkhiqizo ngezindlela ezingahlosiwe
- Ukwehluleka okungenakubikezelwa/ukuxazululwa ngobuchwepheshe besayensi bamanje ngesikhathi sokukhiqiza
- Ukwehluleka ngenxa yezinto zangaphandle ezifana nomlilo, ivolumu engavamiletage, noma izinhlekelele zemvelo
- Amanye amacala lapho i-LS ELECTRIC ingenacala
- Ukuze uthole ulwazi oluningiliziwe lwewaranti, sicela ubheke imanuwali yomsebenzisi.
- Okuqukethwe komhlahlandlela wokufaka kungashintsha ngaphandle kwesaziso sokuthuthukiswa kokusebenza komkhiqizo.
UHLU LOKUXHUMANA
- I-LS ELECTRIC Co., Ltd.
- www.ls-electric.com
- I-imeyili: automation@ls-electric.com
- Indlunkulu/Ihhovisi laseSeoul
Ucingo: 82-2-2034-4033,4888,4703 - Ihhovisi le-LS ELECTRIC Shanghai (China)
Ucingo: 86-21-5237-9977 - I-LS ELECTRIC (Wuxi) Co., Ltd. (Wuxi, China)
Ucingo: 86-510-6851-6666 - I-LS-ELECTRIC Vietnam Co., Ltd. (Hanoi, Vietnam)
Ucingo: 84-93-631-4099 - I-LS ELECTRIC Middle East FZE (Dubai, UAE)
Ucingo: 971-4-886-5360 - I-LS ELECTRIC Europe BV (Hoofddorf, Netherlands)
Ucingo: 31-20-654-1424 - I-LS ELECTRIC Japan Co., Ltd. (Tokyo, Japan)
Ucingo: 81-3-6268-8241 - I-LS ELECTRIC America Inc. (Chicago, USA)
Ucingo: 1-800-891-2941
Amadokhumenti / Izinsiza
 |
LS XB Series Programmable Logic Controller [pdf] Umhlahlandlela wokufaka XB E C-DR10-14-20-30E, XB E C-DN10-14-20-30E, XB E C-DP10-14-20-30E, XB Series Programmable Logic Controller, XB Series, Programmable Logic Controller, Logic Isilawuli, Isilawuli |