LS XB Series Programmable Logic Controller
Tlhahisoleseding ya Sehlahiswa
Litlhaloso:
- C/N:10310001095
- Sehlahisoa: Selaoli sa Monahano se Reriloeng
- XGB CPU (E)
- Mehlala: XB(E)C-DR10/14/20/30E, XB(E)C-DN10/14/20/30E, XB(E)C-DP10/14/20/30E
Litaelo tsa Tšebeliso ea Sehlahisoa
XG5000 Software Installation:
Netefatsa hore o na le mofuta oa V4.01 oa software ea XG5000.
Khokahano ea PMC-310S:
Hokela ho sebelisa segokanyimmediamentsi sa RS-232C.
Kemiso ea 'Mele:
Hloma PLC sebakeng se loketseng ho latela litekanyo tse fanoeng (ka limilimithara). Etsa bonnete ba hore ho na le moea o nepahetseng le sebaka sa tlhokomelo.
Lihokelo tsa Wiring:
Latela setšoantšo sa wiring se fanoeng le PLC. Netefatsa likhokahano tse nepahetseng bakeng sa phepelo ea motlakase, lisebelisoa tsa ho kenya/ho tsoa, le likhokahano tsa likhokahano.
Ho Matlafatsa:
Sebelisa matla ka har'a molumo o boletsoengtage range. Sheba matšoao a nepahetseng a matla le ho qala tsamaiso.
Lenaneo:
Sebelisa software ea XG5000 ho hlophisa mohopolo oa PLC ho latela litlhoko tsa kopo ea hau. Lekola lenaneo ka botlalo pele le romelloa.
LBH
- Ke mofuta ofe oa software o khothaletsoang bakeng sa ho etsa mananeo?
Mofuta oa software o khothaletsoang ke V4.01 ea software ea XG5000. - Ke lokela ho hokahanya PMC-310S joang?
Hokela PMC-310S u sebelisa sebopeho sa RS-232C. - Maemo a tikoloho a ho sebetsa PLC ke afe?
Thempereichara ea ho sebetsa ke -25°C ho isa ho 70°C, ka mefuta e fapaneng ea mongobo ea 5% ho isa ho 95% RH.
Tataiso ena ea ho kenya e fana ka tlhaiso-leseling e bonolo ea ts'ebetso ea taolo ea PLC. Ka kopo, bala ka hloko leqephe lena la data le libuka pele u sebelisa lihlahisoa. Haholo-holo bala mehato ea tšireletso 'me u tšoare lihlahisoa ka nepo.
Litlhokomelo tsa Tšireletso
Moelelo oa temoso le mongolo oa tlhokomeliso
- TLHOKOMELO
TEMOSO e supa boemo bo ka bang kotsi, boo haeba bo sa qojoe, bo ka bakang lefu kapa kotsi e mpe - TLHOKOMELO
TLHOKOMELO e supa boemo bo ka bang kotsi, boo, ha bo sa qojoe, bo ka bakang kotsi e nyane kapa e itekanetseng. E ka boela ea sebelisoa ho lemosa khahlanong le mekhoa e sa sireletsehang - TLHOKOMELO
- Se ke oa ikopanya le lits'oants'o ha motlakase o sebelisoa.
- Sireletsa sehlahisoa hore se se keneloe ke taba ea tšepe ea kantle ho naha.
- Se ke oa theola betri (tjhaja, harola, e otla, e khuts'oane, e soasang)
- TLHOKOMELO
- Etsa bonnete ba hore u sheba rated voltage le tlhophiso ea terminal pele ho terata
- Ha o kenya lithapo, tiisa screw ea "terminal block" ka mefuta e boletsoeng ea torque
- Se ke oa kenya lintho tse tukang linthong tse tikolohong
- Se ke oa sebelisa PLC tikolohong ea ho thothomela ka kotloloho
- Ntle le basebeletsi ba litšebeletso tsa litsebi, Se ke oa qhaqha kapa oa lokisa kapa oa fetola sehlahisoa
- Sebelisa PLC tikolohong e kopanang le lintlha tse akaretsang tse fuperoeng ke database ena.
- Etsa bonnete ba hore mojaro o kantle ha o fete tekanyetso ea module ea tlhahiso.
- Ha u lahla PLC le betri, e tšoare joalo ka litšila tsa indasteri.
Tikoloho ya Tshebetso
Ho kenya, hlokomela maemo a ka tlase.
| Che | Ntho | Tlhaloso | Standard | ||||
| 1 | Mocheso oa tikoloho. | 0 ~ 55℃ | – | ||||
| 2 | Mocheso oa polokelo. | -25 ~ 70 ℃ | – | ||||
| 3 | Mongobo wa tikoloho | 5 ~ 95%RH, e sa fokotseng | – | ||||
| 4 | Mongobo wa polokelo | 5 ~ 95%RH, e sa fokotseng | – | ||||
|
5 |
Ho thothomela Khanyetso |
Ho thothomela nako le nako | – | – | |||
| Khafetsa | Ho potlakisa | Amptsebo | Linako |
Tlhaloso: IEC 61131-2 |
|||
| 5≤f<8.4㎐ | – | 3.5 limilimithara | 10 makhetlo a ka lehlakoreng ka leng bakeng sa
X LE Z |
||||
| 8.4≤f≤150㎐ | 9.8㎨(1g) | – | |||||
| Ho thothomela ho sa feleng | |||||||
| Khafetsa | Khafetsa | Amptsebo | |||||
| 5≤f<8.4㎐ | – | 1.75 limilimithara | |||||
| 8.4≤f≤150㎐ | 4.9㎨(0.5g) | – | |||||
Litlhaloso tsa ts'ebetso
Ena ke ts'ebetso ea ts'ebetso ea XGB. Bakeng sa lintlha tse ling, sheba bukana e amanang le eona.
| Ntho | Tlhaloso | |||
| Mokhoa oa ts'ebetso | Ts'ebetso ea ho pheta-pheta, ts'ebetso e tsitsitseng ea potoloho,
Khaotsa ts'ebetso, tlhahlobo ea nako e sa feleng |
|||
| Mokhoa oa ho laola I/O | Skena ts'ebetso ea batch e lumellanang (mokhoa oa ho khatholla)
Mokhoa o otlolohileng ka taelo |
|||
| Lebelo la ts'ebetso | Litaelo tsa motheo: 0.24㎲/mohato | |||
| Sekotjana sa katoloso e kholo | Ntho e ka sehloohong+Khetho (khetho ea 1slot: mofuta oa ntlha ea 10/14, khetho ea 2slot: mofuta oa lintlha tse 20/30) |
|||
|
mosebetsi |
Ho qala | 1 | ||
| Potoloho e tsitsitseng | 1 | |||
| Ntlha ea kantle | Max. 8 | |||
| Sesebelisoa sa ka hare | Max. 4 | |||
| Mokhoa oa ho sebetsa | MATHA, EMA | |||
| Boiketsi ba ho hlahloba | Ho lieha ho sebetsa, mohopolo o sa tloaelehang, I/O e sa tloaelehang | |||
| Boema-kepe ba lenaneo | RS-232C(Loader) | |||
| Mokhoa oa ho boloka data ha motlakase o hloleha | Ho beha sebaka sa latch ho parameter ea mantlha | |||
| Mosebetsi o hahiloeng | Mosebetsi oa Cnet I/F | Protocol e inehetseng, protocol ea Modbus
Protocol e hlalositsoeng ke mosebelisi |
||
| E khetha kou e le 'ngoe pakeng tsa RS-232C 1 port le
RS-485 1 koung ka parameter |
||||
| High Speed Counter | Tshebetso | 1-mohato : 4㎑ 4 likanale 2-mohato : 2㎑ 2 likanale | ||
|
Counter mode |
Mefuta e 4 ea li-counter e tšehetsoa ho ipapisitsoe le pulse ea input le mokhoa oa INC/DEC
· 1 pulse operation mode : INC/DEC count by program · 1 pulse operation Mode : INC/DEC count by phase B pulse input * 2 pulse operation Mode : INC/DEC count by input pulse * 2 pulse operation Mode : INC/DEC count by the difference of phase |
|||
| ts'ebetso | Khaontara e saenneng ea 32bit | |||
| Mosebetsi | · Ho hlophisoa esale pele ka hare/kantle · Latch counter
· Bapisa tlhahiso · No. ea ho potoloha ka nako ea unit |
|||
| Pulse catch | 50㎲ lintlha tse 4 | |||
| Khatiso ea ntlha ea kantle | Lintlha tse 4: 50㎲ | |||
| Sesefa se kenyang | E khetha har'a 1,3,5,10,20,70,100㎳ (Bakeng sa mojule ka mong) | |||
Sebetsa Tšehetso Software
Bakeng sa tlhophiso ea sistimi, mofuta o latelang oa hlokahala.
XG5000 Software: V4.01 kapa ka holimo
Lisebelisoa le Litlhaloso tsa Cable
Sheba lisebelisoa (Laela thapo ha ho hlokahala)
PMC-310S : RS-232 ho hokahanya (download) cable
Lebitso la likarolo le boholo (mm)
Ena ke karolo e ka pele ea CPU. Sheba lebitso le leng le le leng ha u khanna tsamaiso. Ho fumana lintlha tse ling, sheba bukana ea mosebelisi.
- Seteishene sa puisano se hahiloeng kahare
- Thibelo ea ho kenya
- Boemo ba ts'ebetso ea LED
- Boemo ba ho kenya LED
- Boemo ba tlhahiso ea LED
- Mokhanni oa boto ea khetho
- O/S mode dip switch
- TSAMAISA/EMISA mokhoa oa ho fetola
- PADT Connector
- Thibelo ea terminal ea motlakase
- Thibelo ea ho tsoa
- 24V Output (sub-power)
Boholo(mm)
| Mojule | W | D | H |
| XB(E)C-DR(N)(P)10/14E | 97 | 64 | 90 |
| XB(E)C-DR(N)(P)20/30E | 135 | 64 | 90 |
Wiring
Wiring ea matla
- Haeba phetoho ea matla e le kholo ho feta mefuta e mengata ea maemo a tloaelehileng, kopanya voltagle transformer
- Hokela matla a nang le lerata le lenyane lipakeng tsa likhoele kapa lipakeng tsa mafatše. Haeba ho na le lerata le lengata, hokela sefetoleli se ikhethileng kapa sefe ea lerata.
- matla a PLC, sesebelisoa sa I/O le mechini e meng e lokela ho arohana.
- Sebelisa lefatše le inehetseng haeba ho khoneha. Ha lefatše le sebetsa, sebelisa lefats'e la maemo a 3 (khanyetso ea lefatše 100 Ω kapa ka tlase) le Sebelisa thapo e fetang 2 mm2 bakeng sa lefats'e. Haeba ts'ebetso e sa tloaelehang e fumanoa ho ea ka lefats'e, arola lefatše
Tiisetso
- Nako ea tiisetso ke likhoeli tse 36 ho tloha ka letsatsi la tlhahiso.
- Tlhahlobo ea pele ea liphoso e lokela ho etsoa ke mosebelisi. Leha ho le joalo, ka kopo, LSELECTRIC kapa baemeli ba eona ba ka etsa mosebetsi ona ka tefiso. Haeba sesosa sa phoso se fumanoa e le boikarabelo ba LS ELECTRIC, tšebeletso ena e tla ba ntle ho tefo.
- Mekhahlelo ho tsoa ho tiisetso
- Ho nkela sebaka sa likarolo tse sebelisoang le tse lekanyelitsoeng bophelo (mohlala, li-relay, fuse, capacitor, libeteri, li-LCD, joalo-joalo)
- Ho hloleha kapa tshenyo e bakilweng ke maemo a sa lokang kapa ho tshwara ka ntle ho tse boletsweng bukeng ya mosebedisi
- Ho hloleha ho bakoang ke mabaka a kantle a sa amaneng le sehlahiswa
- Ho hloleha ho bakoang ke liphetoho ntle le tumello ea LS ELECTRIC
- Tšebeliso ea sehlahisoa ka mekhoa e sa lebelloang
- Ho hlōleha ho ke keng ha boleloa esale pele / rarolloa ke theknoloji ea morao-rao ea saense nakong ea tlhahiso
- Ho hloleha ka lebaka la mabaka a kantle joalo ka mollo, matla a sa tloaelehangtage, kapa likoluoa tsa tlhaho
- Linyeoe tse ling tseo LS ELECTRIC e sa ikarabelleng ho tsona
- Bakeng sa tlhaiso-leseling e batsi ka tiisetso, ka kopo sheba bukana ea mosebelisi.
- Likahare tsa tataiso ea ho instola li ka fetoha ntle le tsebiso bakeng sa ntlafatso ea ts'ebetso ea sehlahisoa.
TS'ELISO LETHATA
- LS ELECTRIC Co., Ltd.
- www.ls-electric.com
- E-mail: automation@ls-electric.com
- Ntlo-khōlō / Ofisi ea Seoul
Mohala: 82-2-2034-4033,4888,4703 - LS ELECTRIC Ofisi ea Shanghai (Chaena)
Mohala: 86-21-5237-9977 - LS ELECTRIC (Wuxi) Co., Ltd. (Wuxi, China)
Mohala: 86-510-6851-6666 - LS-ELECTRIC Vietnam Co., Ltd. (Hanoi, Vietnam)
Mohala: 84-93-631-4099 - LS ELECTRIC Middle East FZE (Dubai, UAE)
Mohala: 971-4-886-5360 - LS ELECTRIC Europe BV (Hoofddorf, Netherlands)
Mohala: 31-20-654-1424 - LS ELECTRIC Japan Co., Ltd. (Tokyo, Japan)
Mohala: 81-3-6268-8241 - LS ELECTRIC America Inc. (Chicago, USA)
Mohala: 1-800-891-2941
Litokomane / Lisebelisoa
 |
LS XB Series Programmable Logic Controller [pdf] Tlhophiso Tataiso XB E C-DR10-14-20-30E, XB E C-DN10-14-20-30E, XB E C-DP10-14-20-30E, XB Series Programmable Logic Controller, XB Series, Programmable Logic Controller, Logic Molaoli, Molaoli |