WM SYSTEMS WM-E2SL Jagorar Mai Amfani da Modem

WM SYSTEMS WM-E2SL 
Jagorar Mai Amfani da Modem

HANYA

– Rumbun filastik da murfin samansa

- PCB (babban allo)
- maki masu sauri (layin gyarawa)

- Mai haɗin eriyar FME (50 Ohm) - na zaɓi: Mai haɗa eriyar SMA
- Mai haɗin RJ45 (haɗin bayanai da wutar lantarki na DC)

– Data dangane na USB dubawa
LEDs Matsayi: daga hagu zuwa dama: LED2 (ja), LED1 (blue), LED3 (kore)

- Mini katin SIM (ja shi zuwa hagu ka buɗe)
– PCB fastener sukurori

- Super capacitors
- Mai haɗa eriya na ciki (U.FL - FME)

KASANCEWAR WUTA DA YANAYIN MAHALI

Ƙarfin wutar lantarki: 8-12V DC (10V DC maras kyau)

A halin yanzu: 200mA, Amfani: 2W @ 10VDC
Shigar da wutar lantarki: ana iya ba da ita daga wutar DC ta mita ta tashar tashar RJ45

Sadarwar mara waya: bisa ga tsarin da aka zaɓa (zaɓuɓɓukan oda)
Tashar jiragen ruwa: haɗin RJ45: RS232 (300/1200/2400/4800/9600 baud)

Yanayin aiki: daga -30°C* zuwa +60°C, rel. 0-95% rangwame. zafi (* TLS: daga 25°C) / Ma'ajiya zafin jiki: daga -30°C zuwa +85°C, rel. 0-95% rangwame. zafi
*Idan ana amfani da TLS: daga -25°C

BAYANIN MICHANICAL / ZINA

Girma: 86 x 85 x 30mm, nauyi: 106 gr,
Tufafi: Modem ɗin yana da gidan filastik mara amfani, IP21 mai kariya.
Ana iya ɗaure shingen ta hanyar gyara kunnuwa a ƙarƙashin murfin ƙarshen mita.

MATAKAN SHIGA

Mataki #1: Cire murfin tashar tasha ta screws (tare da screwdriver).
Mataki #2: Tabbatar cewa modem baya ƙarƙashin wutar lantarki, cire haɗin RJ45 daga mitar. (Za a cire tushen wutar lantarki.)

Mataki #3: Tura kunnuwa (3) kuma buɗe saman murfin yadi (1) a mahaɗin eriya. PCB zai kasance kyauta don taɓawa.
Mataki #4: Tura murfin mariƙin SIM ɗin filastik (8) daga dama zuwa hagu, sannan buɗe shi.

Mataki #5: Saka katin SIM mai aiki a cikin mariƙin (8). Kula da matsayi daidai
( guntu yana kallon ƙasa, gefen katin da aka yanke yana kallon waje zuwa eriya. Latsa SIM ɗin cikin layin jagora, rufe mariƙin SIM, sannan mayar da mariƙin SIM (8) daga hagu zuwa dama, kuma rufe shi baya.
Mataki #6: Tabbatar cewa an haɗa kebul ɗin baƙar fata na ciki na eriya akan mahaɗin U.FL (11)!
Mataki #7: Duba cewa kebul na bayanai na ciki (5) an haɗa shi da PCB (2), zuwa haɗin haɗin bayanai (6).
Mataki #8: Hana eriya zuwa mai haɗin eriyar FME (5). (Idan kana amfani da eriyar SMA, to, yi amfani da mai canza SMA-FME).
Mataki #9: Haɗa modem ɗin zuwa kwamfutar ta hanyar kebul na RJ45 da RJ45-USB Converter, sannan saita matsayin jumper zuwa yanayin RS232. (Za a iya saita modem kawai a ciki
Yanayin RS232 ta hanyar kebul!)
Mataki #10: Sanya modem ta software na WM-E Term®.
Mataki #11: Bayan daidaitawa, cire adaftar RJ45-USB daga kebul kuma za a daina samar da wutar lantarki ta modem.
Mataki #12: Rufe murfin katangar modem (1) ta kunnuwan maɗaurin sa (3) zuwa shingen mita. Za ku ji sautin dannawa idan an rufe.
Mataki #13: Saka da shigar da modem zuwa madaidaicin madaidaicin mita sannan a ɗaure modem ɗin cikin gidan mita.
Mataki #14: Ana iya ƙaddamar da haɗin mitar modem-Landis+Gyr® ta tashar tashar RS232 ta hanyar haɗin kebul na 1:1. Don haka yi amfani da kebul na beige RJ45 (5) na modem don haɗawa zuwa tashar RJ45 na mita.
Mataki #15: Modem ɗin za ta yi aiki da mita nan da nan kuma za a fara aiki. Ana iya duba ayyukan na'urar tare da LEDs.

ALAMOMIN LED NA Aiki - AKAN CIGABA

Hankali! Dole ne a yi cajin modem ɗin kafin amfani na farko - ko kuma idan ba a yi amfani da shi na dogon lokaci ba. Cajin yana ɗaukar kusan ~ 2 mintuna idan babban ƙarfin ya ƙare / cire shi.

A kan ma'aikatun ma'aikata, aiki da jerin siginar LED za a iya canza su ta hanyar WM-E Term® kayan aiki na daidaitawa, a cikin Saitunan Mitar Gabaɗaya rukunin ma'auni. Za a iya samun 'yancin zaɓar ƙarin zaɓuɓɓukan LED a cikin WM-E2SL ® modem's Installation Manual.

Muhimmanci! Lura, cewa yayin loda firmware na LEDs suna aiki kamar yadda yake na al'ada - babu wata siginar LED mai mahimmanci don ci gaban farfadowar FW. Bayan shigar da Firmware, LEDS 3 za su yi haske na tsawon daƙiƙa 5 kuma duk zasu ɓace, sannan modem ɗin yana sake farawa ta sabon firmware. Sa'an nan za a yi amfani da duk siginar LED kamar yadda aka jera a sama.

TSARIN MAGANAR MODEM

Dole ne a saita modem ta hanyar WM-E Term® software ta hanyar daidaita sigoginsa waɗanda dole ne a yi su kafin aiki na yau da kullun da amfani:

A lokacin tsarin daidaitawa, dole ne a cire mai haɗin RJ45 (5) daga mai haɗin mita kuma ya kamata a haɗa shi da PC. Lokacin haɗin PC ɗin bayanan mita ba zai iya karɓar modem ba.
Haɗa modem ɗin zuwa kwamfuta ta kebul na RJ45 da RJ45-USB Converter. Masu tsalle dole ne su kasance a matsayi na RS232!
Muhimmanci! Lokacin daidaitawa, ana tabbatar da samar da wutar lantarki na modem ta wannan allon mai canzawa, akan haɗin USB.
Wasu kwamfutoci na iya kula da canje-canjen USB na yanzu. A wannan yanayin ya kamata ku yi amfani da wutar lantarki ta waje tare da haɗi na musamman.
Bayan sanyi ya sake haɗa kebul na RJ45 zuwa mita!

Don haɗin kebul na serial saitin saitunan tashar tashar COM na kwamfutar da aka haɗa bisa ga kaddarorin tashar tashar tashar modem a cikin Windows a a Fara menu / Control panel / Mai sarrafa na'ura / Tashoshi (COM da LTP) a cikin Abubuwan: Bit/secku: 9600. Bayanan bayanaiku: 8. Daidaituwa:
Babu, Tsayawaku: 1. Bandwith iko: A'a
Ana iya aiwatar da tsarin ta hanyar kiran CSData ko haɗin TCP idan an riga an saita APN.

GABATARWA MODEM TA WM-E TERM®

Ana buƙatar yanayin lokacin aiki na Microsoft .NET akan kwamfutarka. Don daidaitawar modem da gwaji za ku buƙaci fakitin APN/da aka kunna, katin SIM mai aiki. Tsarin yana yiwuwa ba tare da katin SIM ba, amma a wannan yanayin modem ɗin yana sake farawa lokaci-lokaci, kuma wasu fasalolin modem ba za su samu ba har sai an saka katin SIM ɗin (misali hanyar shiga nesa).

Haɗi zuwa modem (ta hanyar tashar RS232*)

Mataki #1: Zazzagewa https://www.m2mserver.com/m2m-downloads/WM-ETerm_v1_3_63.zip file. Ka cika kuma fara da wm-term.exe file.
Mataki #2: Danna Shiga button kuma zabi da WM-E2S na'urar da shi Zaɓi maballin.
Mataki #3: A hagu akan allon, a cikin Nau'in haɗin kai tab, zabar da Serial tab, kuma cika Sabuwar haɗi filin (sabon haɗin gwiwa profile suna) da turawa Ƙirƙiri maballin.

Mataki #4: Zaɓi abin da ya dace COM tashar jiragen ruwa da kuma saita watsa bayanai gudun zuwa 9600 baud (a cikin Windows® dole ne ku saita gudu iri ɗaya). The Tsarin bayanai darajar ya zama 8, N,1. Sannan turawa Ajiye button don ƙirƙirar serial connection profile.
Mataki #5: A gefen hagu na kasa na allon zaɓi haɗi nau'in (serial).
Mataki #6: Zaɓin Bayanin na'ura icon daga menu kuma duba RSSI darajar, cewa ƙarfin siginar ya isa kuma matsayin eriya yayi daidai ko a'a. (Mai nuna alama ya zama aƙalla rawaya (matsakaicin siginar) ko kore (kyakkyawan ingancin sigina) Idan kuna da raunata ƙima, canza matsayin eriya yayin da ba za ku sami mafi kyawun ƙimar dBm ba. (duba matsayi kuma).

Mataki #7: Zaɓin Matsakaicin karantawa icon don haɗin modem. Za a haɗa modem ɗin kuma ƙimar sigar sa, za a karanta masu ganowa.

* Idan kuna amfani da kiran bayanai (CSD) ko haɗin TCP/IP daga nesa don haɗin modem - duba littafin shigarwa don sigogin haɗin!

Tsarin siga

Mataki #1: Zazzagewa a WM-E Term sampda sanyi file. Zabi na File / Load menu don loda da file:
https://m2mserver.com/m2m-downloads/WM-E2SL-STD-DEFAULT-CONFIG.zip
Mataki #2: A cikin Ƙungiyar siga zabar da APN group, sannan tura zuwa ga Gyara dabi'u maballin. Ƙayyade da APN uwar garken da kuma idan akwai neccassary da APN Sunan mai amfani kuma APN kalmar sirri filayen, da turawa zuwa ga OK maballin.
Mataki #3: Zaɓin M2M rukunin siga, sannan tura zuwa ga Gyara dabi'u maballin. Ba da Lambar PORT zuwa ga Bayanin karatun mita (IEC). tashar jiragen ruwa filin - wanda za a yi amfani da shi don karatun mita mai nisa. Ba da tsari LAMBAR PORT zuwa ga Kanfigareshan da firmware zazzage tashar jiragen ruwa.

Mataki #4: Idan SIM yana amfani da PIN na SIM, to dole ne ka ayyana shi zuwa ga Cibiyar sadarwa ta wayar hannu rukunin ma'auni, kuma a ba shi cikin PIN SIM filin. Zabi a Fasahar sadarwar wayar hannu (misali Duk fasahar hanyar sadarwa da ke akwai - wanda aka ba da shawarar don zaɓar) ko zaɓin LTE zuwa 2G (don "fallback").
Hakanan zaka iya zaɓar afaretan wayar hannu da cibiyar sadarwa- azaman atomatik ko manual. Sannan tura zuwa ga OK maballin.
Mataki #5: Ana iya samun tashar tashar jiragen ruwa ta RS232 da saitunan m a cikin Trans. / NTA rukunin ma'auni. Saitunan tsoho sune kamar haka: a Yanayin amfani da yawa: m yanayin, Mitar tashar jiragen ruwa baud ƙimarku: 9600. Tsarin bayanai: Kafaffen 8N1). Sannan tura zuwa ga OK maballin.
Mataki #6: A cikin RS485 mita dubawa rukunin ma'auni, ya kamata ku kashe yanayin RS485. Sannan tura zuwa ga OK maballin.

Mataki #7: Bayan saitunan dole ne ku zaɓi Rubutun siga icon don aika saitunan zuwa modem. Kuna iya ganin ci gaban abubuwan da aka ɗauka a mashigin ci gaba na matsayi na ƙasa. A ƙarshen ci gaba za a sake kunna modem ɗin kuma za a fara tare da sabbin saitunan.
Mataki #8: Idan kuna son amfani da modem ta hanyar RS485 don karatun mita, to dole ne ku canza masu tsalle zuwa yanayin RS485!

Ƙarin zaɓuɓɓukan saitin

Za'a iya inganta yanayin sarrafa modem a wurin Kare rukunin ma'auni.
Ya kamata a adana sigogin da aka saita zuwa kwamfutarka kuma ta hanyar File/Ajiye menu.
Haɓaka firmware: zaži Na'urori menu, da kuma Juya Firmware upload abu (inda za ku iya loda da dacewa.DWL tsawo file). Bayan ci gaba da upload, da modem za a sake yi da kuma aiki tare da sabon firmware da saitunan da suka gabata!

TAIMAKO

Samfurin yana da alamar CE bisa ga ka'idodin Turai.
Takaddun samfuran, software ana iya samun su akan samfuran website: https://www.m2mserver.com/en/product/wm-e2sl/