200W Ungeniso lwe-AC oluguquguqukayo Frequency
Qhuba Modyuli kunye PFC Function
VFD-200C-230
VFD-200C-230 AC Igalelo eliguquguqukayo lokuQhuba iModyuli yokuQhuba
 |
 |
| https://www.meanwell.com/Upload/PDF/VFD-E.pdf | https://youtu.be/I8xQxZdWf7A?si=u2BEOM4Fqx1beXny |
Iimbonakalo
- Igalelo le-90 ~ 264Vac, i-PFC eyakhelweyo iphakamisa kwi-380VDC
- Amandla stage, i-3-phase switches with sensors in one unit for external control (ibhodi yokulawula i-VFD-CB ithengiswa ngokukhawuleza)
- Incopho ephezulu yangoku ukuya kuthi ga kwi-200% kunye nemizuzwana emi-5
- Uyilo olungenamfeni yokusebenza cwaka kunye nobomi obude
- Ukhuseleko: Isekethe emfutshane / i-OCP
- Izinzwa zangaphakathi zondla ngaphandle kokulawula: Inzwa yangoku - ulawulo lwe-torque yemoto
DC ibhasi voltaginzwa ye-e - OVP / UVP
Uluvo lobushushu-OTP - -30 ~ + 70 ° C ubushushu bokusebenza obubanzi
- Ifanelekile kwi-3-phase motor drive
(umzekelo, i-BLDC, i-Motor Induction, i-SynRM) - Iwaranti yeminyaka emi-3
Usetyenziso
- HVAC
- Umlandeli
- Impompo yamanzi / yoMoya
- Izixhobo zamandla
- Umhambisi
- Ucango oluzenzekelayo
- Izixhobo zokuzilolonga
IKHOWUDI ye-GTIN
Uphendlo lwe-MW: https://www.meanwell.com/serviceGTIN.aspx
Inkcazo
I-VFD-200C-230 yimodyuli yamandla eguquguqukayo yendalo yonke ebonelela ngamandla adibeneyo.tage, abaqhubi besango kunye ne-VFD sensors ezisisiseko ezifana nesigaba sesithathu semveliso yangoku kunye nezinzwa zobushushu. Le mveliso inokuphunyezwa kwisisombululo sesithathu sokuqhuba i-motor ngokulungelelanisa kunye nomlawuli we-motor drive wangaphandle kwinqanaba le-logic kunye ne-analog I / 0. Amandla stagIgalelo le-e linqanaba elinye elipheleleyo ukusuka kwi-90VAC ukuya kwi-264VAC kunye nomsebenzi we-PFC. I-3-phase motor output ifikelela kwi-240V kunye ne-200% ephezulu yekhono langoku.I-VFD-200C-230 ifanelekile kwi-motor-phase motor drive, njenge-BLDC;
Injini yokungenisa, kunye nezicelo zeSynRM.
Ukwenza iikhowudi kwimodeli
INGCACISO
| UMODI NO. | VFD-200-230 | ||||
| ISIPHUMO se-PWM (Qaphela 1,234) |
UMQULUTAGE RANGE (UVW) | 380Vmax, umgca-kumgca voltage 0-268V ehlengahlengiswayo kunye ne-PWM emoduliweyo, ilungele i-3PH 200-240V yeklasi yemoto | |||
| NGOKU | Ikaliwe | 0.8A | |||
| Incopho | 1.6A imizuzwana 5 | ||||
| RATED AMANDLA | 200W | ||||
| UKUSEBENZA | 92% | ||||
| DC BUS VOLTAGE | 380 ±5VDC | ||||
| RWonke amaxesha | 2.5 KHz -15 KHz | ||||
| Igalelo | RATED INPUT VOLTAGE | 90 - 264VAC | |||
| UHLELO LWEFREQUENCY RANGE (Hz) | 47 - 63Hz | ||||
| UMBONO WAMANDLA (Uhlobo.) | PF>0.99/115VAC, PF >0.93/230VAC kumthwalo opheleleyo | ||||
| IINGENELO EREYILWEYO NGOKU | 3.5A/115VAC 2Al230VAC | ||||
| I-INRUSH CURRENT | Ukuqala okubandayo 50A / 230VAC | ||||
| UKUVUZA NGOKU | <2mA/240VAC | ||||
| ULAWULO! UMSEBENZI (Qaphela 5) |
3•ISIGABA SO ULAWULO lwe-PWM | Uphawu lolawulo lwe-PWM kumqhubi wesango le-IGBTs. (CN93, PING-13) I-33V TTL/CMOS igalelo: Hiqh(>2.7V): IGBT ON ; Phantsi(<0.4V): IGBT OFF |
|||
| ISIGABA ESI-3 SOVAMVA NJENGOKU | I-100mO eyakhelwe-ngaphakathi ye-shunt resistors ephantsi kwinqanaba le-UVW (CN93, PI144-6) | ||||
| DC BUS VOLTAGUMBONO WE-E | DC BUS voltagi-e sensor output (CN93, PINT) 2.5V@DC BUS 380V | ||||
| Inzwa yetyhefu | I-10K0 NTC eyakhelwe-ngaphakathi yokuva ubushushu bokusebenza kwe-IGBTs. (TSM2A103F34D1R (i-Electronic yokucinga), i-PI N3 ye-CN93) | ||||
| UMQONDISO WEPHUTHA | Isiginali yempazamo ye-inverter(Isekethe emfutshane/OCP, CN93, PI N7). 3.3V TTL / CMOS imveliso: Eqhelekileyo: Hiqh (> 3V); Okungaqhelekanga: Phantsi(<0.5V) |
||||
| AMANDLA ANCEDAYO | Amandla okukhutshwa kwe-15V engekho yodwa kwibhodi yokulawula yangaphandle (CN93, i-PIN 14 ukuya kwi-PI142 ) 15V@0.1A; Ukunyamezela +/- 0.5V, Ripple 1Vp-p max | ||||
| UKUKHUSELA | INTAMBO EMFUTSHANE | Uhlobo lokhuseleko : Vala i-o/p voltage, amandla ombane kwakhona ukuze ubuye | |||
| IMEKO | ITEMPU YOKUSEBENZA. | -30 – +70°C (Jonga “kwiGcophe lokukhulisa uD) | |||
| UKUSEBENZA UKUTHUKA | I-20 - 90% ye-RH ayi-condensing | ||||
| ITEMPA YOKUGCINA, UKUFUMANA | -40 - +85 ° C, 10 - 95% i-RH engaguqukiyo | ||||
| UKUDIDLA | 10 - 500Hz, 2G 10min./Tcycle, ixesha le-60min. nganye ecaleni X, Y, Z izizembe | ||||
| UKHUSELEKO & EMC | IMIGANGATHO YOKHUSELEKO | CB I EC61800-5-1,TUV/BS EN/EN61800-5-1,EAC TP TC004 evunyiweyo | |||
| YIMA IVOLITAGE | I/P-FG:2KVAC | ||||
| UKUCHASWA KWAMAKHELA | I/P-FG:100M Ohms/500VDC!25°C! 70%RH | ||||
| UKUQALISWA KWE-EMC | Ipharamitha | Umgangatho | Inqanaba lovavanyo I Qaphela | ||
| Kuqhutywa | I-BS EN/EN IEC61800-3 | IklasiA, C2 | |||
| Imitha | I-BS EN/EN IEC61800-3 | IklasiA, C2 | |||
| IHarmonic yangoku | I-BS EN/EN IEC61000-3-2 | IklasiA | |||
| Umqulutage Flicker | I-BS EN/EN61000-3-3 | ||||
| UKUGONYWA KWI-EMC | I-BS EN/EN IEC61800-3, indalo yesibini | ||||
| Ipharamitha | Umgangatho | Inqanaba lovavanyo /Qaphela | |||
| ESD | I-BS EN/EN61000-4-2 | Inqanaba 3, 8KV umoya; Inqanaba 2, 4KV uqhagamshelwano | |||
| Imitha | I-BS EN/EN IEC61000-4-3 | Inqanaba3 | |||
| EFT / kwiZiko | I-BS EN/EN61000-4-4 | Inqanaba3 | |||
| Surge | I-BS EN/EN61000-4-5 | Inqanaba 3, 2KV / Line-Earth; Inqanaba 3, 1KV / Line-Line | |||
| Kuqhutywa | I-BS EN61000-4.6 | Inqanaba3 | |||
| IMagnetic Field | I-BS EN/EN61000-4-8 | Inqanaba4 | |||
| Umqulutage Iidiphu kunye neziphazamiso | I-BS EN/EN IEC61000-4-11 | > 95% dip 0.5 amaxesha, 30% d IP 25 amaxesha, >95% ukuphazamiseka 250 amaxesha | |||
| Umqulutage ukutenxa | IEC 61000-2-4 Udidi 2 | ±10% Un | |||
| Iyonke i-Harmonic distortion (THD) I-odolo yomntu ngamnye ye-Harmonic | IEC 61000-2-4 Udidi 3 IEC 61000-4-13 Udidi 3 | I-THD 12% | |||
| Ukwahluka rhoqo | IEC 61000-2-4 | ±4% | |||
| Ireyithi yokutshintsha rhoqo | IEC 61000-2-4 | 2%/s | |||
| ABANYE | MTBF | 2568.7K iiyure min.Telcordia SR-332 (Bellcore); 203.8K iiyure m in.M IL HDBK-217F (25°C) | |||
| DIMENSION (L'WII) | 146'55'26mm | ||||
| UKUPAKISHA | 0.31 Kg;40pcs/13.3kg/0.87CUFT | ||||
| PHAWULA | I-1.3-isigaba se-220V motor iyanconywa.Nceda uqwalasele umlinganiselo wangoku xa usetyenziselwa i-motor yeklasi ye-100-120V. 2.Jonga kwincopho yesakhono sangoku kwi-"V/I Curve". I-3.Ukusebenza kakuhle kuvavanywa kunye nomthwalo we-inductive kwi-rated current kunye namandla apheleleyo. 4.Zonke iiparitha ENGAchazwanga ngokukodwa zilinganiswa kwigalelo le-230VAC, umthwalo olinganisiweyo kunye ne-25 ° C yobushushu be-ambient. 5.Nceda ubhekiselele “kwiNcwadana yoMsebenzi” ngeenkcukacha ezithe vetshe.  Product Liability Disclaimer Ukuze ufumane iinkcukacha ezithe vetshe, nceda ubhekiselele https://www.meanwell.com/serviceDisclaimer.aspx |
||||
Umzobo weBhloko
Incwadi yoMsebenzi
- Ulawulo lwe-PWM lwesigaba esi-1.3 (CN93, PIN8~13)
I-VFD-200C-230 ibonelela ngeesekethe ezithandathu zokutshintshela ngokusebenzisa i-IGBTs ye-3 half-bridge. Ii-IGBT zesigaba ngasinye zilawulwa ngu
(I-PIN 8~13). Imfuno yegalelo le-PWM iyahambelana neempawu zombini ze-TTL kunye ne-CMOS 3.3V. Nceda ujonge lo mzobo ungezantsi. 
ISILUMKISO: Kuyimfuneko ukugcina ubuncinci bexesha lokufa phakathi kweswitshi ephezulu nasezantsi yesigaba ngasinye.
- 2.3 (CN93, PIN4~6)3-inqanaba lokuFumana ngoku kunye noKhuseleko lwangoku.
I-Low-side shunt resistors 100mΩ ifakwe kwisigaba ngasinye se-VFD-200C-230 kumlinganiselo we-c uurrent kunye nokufumanisa i-short-circuit. Kucetyiswa ukuba ucuthe ubude besekethe yobhaqo yangaphandle kwaye uchonge umqondiso ngee-OPAs. Nceda ujonge kumzobo ongezantsi.
Ukuba imveliso yangoku idlula i-200% yexabiso elilinganisiweyo, isiphaluka sokukhusela sangaphakathi siya kuqaliswa kwaye sivale umqhubi wesango lokukhusela.
- DC BUS Voltage Ukufunyanwa (CN93, PIN1)
I-VFD-200C-230 yakhiwe ngebhasi ye-DC voltagi-e sensor(i-HV+ sensor, i-PIN 1). I-sensor ibonelela ngemveliso ye-2.5V xa i-DC ibhasi voltage ikwi 380V. Kuyacetyiswa ukuba kubonwe umqondiso ngee-OPAs. Xa umqulutagI-e yebhasi ye-DC idlula i-420V, isignali ye-PWM yokufakwayo kufuneka ivale ukhuseleko.
- Ukubonwa koBubushushu be-IGBT (CN93, PIN3)
I-VFD-200C-230 yakhiwe-kwi-NTC resistor yokubona ubushushu be-IGBTs. Abasebenzisi banokubona ubushushu be-IGBTs ukuze bakhuseleke. (Uhlobo lwe-NTC: TSM2A103F34D1R, Ukucinga nge-Electronic) Isekethe yokufumanisa ekhuthazwayo ingezantsi. Kucetyiswa ukuba kuvalwe igalelo lePWMs, ukuba iqondo lobushushu lingaphezulu kwama-95℃.
- Uphawu lwempazamo
Ukuba i-VFD-200C-230 idibana nemeko ye-overcurrent kwaye ihlala kuloo meko ixesha elincinci le-overcurrent, i-FAULT isignali iya kwenziwa (iphantsi esebenzayo) ukwazisa umlawuli wangaphandle okanye isiphaluka.
- Izindululo zeBrake(CN100,PIN1,3)
I-VFD-200C-230 igcinelwe i-CN100 PIN1,3 eqhagamshela kwi-HV+,HV- yoyilo lwesekethe yebrake.
Umthamo omkhulutagI-e kwi-DC Bus(HV+) ayisayi kuba ngaphezulu kwe-420V.
Ukucaciswa koomatshini
I-AC Input Terminal PIN NO. Isabelo (TB1)
| Phina No. | Isabelo |
| 1 | I-AC / L |
| 2 | I-AC / N. |
| 3 |  |
Qutput Terminal Pin NO. Isabelo (TB100)
| Phina No. | Isabelo |
| 1 | U |
| 2 | V |
| 3 | W |
I-380V DC Bus Connector(CN100): JST B3P-VH okanye ilingana
| Phina No. | Isabelo se-AW |
| 1 | HV+ |
| 2 | Akukho Pini |
| 3 | HV - |
Izindlu zokukhwelana: JST VHR okanye efanayo
Itheminali: JST SVH-21T-P1.1 okanye ilingana
I-CN100 isetyenziselwa ukufakela i-regenerative brake device, ukuphepha umonakalo we-VFD-200C-230.
I-Pin yokulawula NO. Isabelo (CN93) : HRS DF11-14DP-2DS okanye into efanayo
| Phina No. | Isabelo | Phina No. | Isabelo |
| 1 | Uluvo lweHV+ | 8 | PWM_W H |
| 2 | HV- | 9 | PWM_W L |
| 3 | I-RTH | 10 | PWM_V H |
| 4 | RsH U | 11 | PWM_V L |
| 5 | RsH V | 12 | PWM_U H |
| 6 | RSH_W | 13 | PWM_U L |
| 7 | Impazamo | 14 | Ixabiso _ 15V |
Izindlu zokukhwelana: HRS DF11-14DS okanye efanayo
Itheminali HRS DF 11-**SC okanye efanayo
I-Pin yokulawula inombolo yeSabelo(CN93):
| Phina No. | Umsebenzi | Inkcazo |
| 1 | Uluvo lweHV+ | DC BUS voltagisiphumo soluvo lwe-e, ireferensi ye-pin 2(HV-) |
| 2 | HV- | DC BUS voltagumhlaba wemveliso woluvo |
| 3 | I-RTH | Isivamvo sobushushu |
| 4 | RSH_U | Isigaba se U isiphumo sangoku soluvo |
| 5 | RSH_V | Inqanaba le-V isiphumo sangoku soluvo |
| 6 | RSH_W | Kwinqanaba le-W isiphumo sangoku soluvo |
| 7 | Impazamo | Ukufunyanwa kwangoku. Eqhelekileyo> 3V, Engaqhelekanga <0.5V |
| 8 | PWM_W H | Igalelo le-W yenqanaba eliphezulu lengqiqo, kwi> 2.7V; ngaphandle kwe-0.4V |
| 9 | PWM_W L | Igalelo le-W yesigaba esisezantsi sengqiqo, kwi> 2.7V; ngaphandle kwe-0.4V |
| 10 | PWM_V H | Igalelo le-V yesigaba esiphezulu se-logic, kwi> 2.7V; ngaphandle kwe-0.4V |
| 11 | PWM_V L | Igalelo le-V yesigaba esisezantsi sengqiqo, kwi> 2.7V; ngaphandle kwe-0.4V |
| 12 | PWM_U H | Igalelo le-U isigaba esiphezulu se-logic, kwi> 2.7V; ngaphandle kwe-0.4V |
| 13 | PWM_U L | I-U phase low side logic input, on> 2.7V; ngaphandle kwe-0.4V |
| 14 | Vaux_15V | Umqulu oncedisayotage imveliso 15V reference kwi pint (HV-). Ubuninzi bomthwalo wangoku ngu-0.1A |
Isicelo
Isicelo example: BLDC drive isicelo
- Umzobo ubonisa inkqubo ye-BLDC yokuqhuba i-VFD-200C-230.
- Abaphuhlisi banokulawula umqondiso we-PWM we-6-switch ngokusebenzisa i-SPWM okanye i-SVPWM, njl njl. kwi-3-phase vol.tage ukumodareyitha, kunye nokwakha indlela yolawulo isiseko kwi shunt abenzi boluvo lwangoku kwisigaba-3-kwicala elisezantsi switsha (RSH_U/V/W) kunye DC BUS vol.tagi-e sensor(i-HV-+ sensor) ebonelelwa yi-VFD-200C-230.
- Abaphuhlisi banokukhetha i-BLDC efanelekileyo yoluvo lwendawo efana ne-encoder okanye i-Hall-effect sensors ukuba ifanele izicelo zabo.
- Kucetyiswa ukuba kufakwe i-brake circuit/isixhobo kwi-HV-+/HV- pin( DC BUS,CN100) ukunqanda i-DC BUS OVP xa i-BLDC ithoba isantya.
- Kucetyiswa ukuba uvale igalelo le-PWM okanye uqhagamshele kwisixhobo sokuxhathisa isiqhoboshi ukuze ukhuseleke xa i-DC Bus vol.tagIphezulu kune-420V.
- Ukuba i-VFD-200C-230 isetyenziswe ngolawulo olungafanelekanga, olufana nokukhawuleza ngokukhawuleza okanye ulawulo olubi lwangoku, inokubangela i-VFD-200C-230's fault-state ukuvala umbane wemveliso.tage (inqanaba eliphantsi kwi-FAULT pin).
Ukuhlohla
- Sebenza ngepleyiti yealuminiyam eyongezelelweyo
Ukuze kuhlangatyezwane ne*Derating Curve” kunye ne “Static Characteristics* VFD series kufuneka ifakwe kwipleyiti yealuminiyam(okanye ikhabhathi yobukhulu obufanayo) emazantsi. Ubungakanani bepleyiti yealuminiyam ecetyisiweyo s iboniswe ngezantsi. Kwaye ukulungiselela ukusebenza thermal, ipleyiti aluminiyam kufuneka umgangatho elinganayo kwaye agudileyo (okanye ziqatywe igrisi thermal), kunye VFD series kufuneka firmiy mountedat embindini ipleyiti aluminiyam.
- Nge 15CFM umoya ngenkani
Uluhlu lokufikelela
Ukuba unayo nayiphi na imfuneko yolawulo lwesicelo esithile, nceda uqhagamshelane MEAN WELL ngeenkcukacha ezithe vetshe.
Ibhodi yokulawula iMoto (ibhodi yokulawula iMoto kunye nemodyuli yeVFD kufuneka iodolwe ngokwahlukeneyo)
| Umyalelo we-MW onguNomb. | IBhodi yoLawulo | Icebiso leNdibano | Ubungakanani |
| VFD-CB |  |
 |
1 |
Usetyenziso oluqhelekileyo
- Imodyuli eguquguqukayo yokuphindaphinda (uthotho lweVFD)
- Ibhodi yokulawula ye-Vaable Frequency Drive (Iyilwe nguMsebenzisi okanye iSoluton Ibonelelwe nguMEAN WELL)
- 3-isigaba Pump Motor
- Ibhetri
- Imodyuli eguquguqukayo yokuphindaphinda (uthotho lweVFD)
- Ibhodi yokulawula ye-Vaable Frequency Drive (Iyilwe nguMsebenzisi okanye iSoluton ebonelelwe nguMEAN WELL)
- I-3-isigaba se-Wheel Motor ye-Application ye-AGV
- Imodyuli eguquguqukayo yokuphindaphinda (uthotho lweVFD)
- Ibhodi yokulawula ye-Vaable Frequency Drive (Iyilwe nguMsebenzisi okanye iSoluton ebonelelwe nguMEAN WELL)
- 3-isigaba Fan Motor
- HEPAfor Ukuhluza umoya
I-DEMO KIT
Nceda uqhagamshelane MEAN WELL ngeenkcukacha ezithe vetshe.
VFD Demo Kit Umsebenzi ongundoqo kunye neempawu.
- I-VFD-350P-230 eyakhelwe ngaphakathi kunye ne-230V motor.
- Ukuqalisa/ukumisa/ukuya phambili/umva/ulawulo lwesantya.
- Ukuqala kweMoto / misa / phambili / umva isalathisi ngasekunene.
- Isantya seMoto (RDM) bonisa.
- Ibhodi yokulawula inokutshintshwa.
- Ukuxhasa uqhagamshelo lwemoto lwangaphandle.
INcwadana yoFakelo
Nceda bhekisa ku: http://www.meanwell.com/manual.html
Amaxwebhu / Izibonelelo
 |
UKUTHETHA KAHLE VFD-200C-230 AC Igalelo eliGuquguqukayo lokuQhuba iModyuli kunye noMsebenzi wePFC [pdf] Incwadi yoMnini VFD-200C-230, VFD-200C-230-20240812, VFD-200C-230 AC Input Variable Frequency Drive Module with PFC Function, VFD-200C-230, AC Input Variable Frequency Drive Module, Variable Frequency Drive Module with PFC Function Module Umsebenzi wePFC, iModyuli yokuQhuba rhoqo kunye noMsebenzi wePFC, iModyuli yokuQhuba kunye noMsebenzi wePFC, iModyuli kunye noMsebenzi wePFC, kunye noMsebenzi wePFC, uMsebenzi wePFC, uMsebenzi |