Blustream Multicast ACM200 / ACM210
Imodyuli yoLawulo oluPhezulu
Incwadi yokusebenzisaUhlaziyo 1.3 – Agasti 2023

Enkosi ngokuthenga le mveliso yeBlustream
Ngowona msebenzi uphezulu kunye nokhuseleko, nceda ufunde le miyalelo ngononophelo phambi kokudibanisa, ukusebenzisa okanye ukulungisa le mveliso. Nceda ugcine le manyuwali ukuze uyisebenzise kwixesha elizayo.
Isixhobo sokukhusela iSurge siyacetyiswa
Le mveliso iqulethe izinto ezibuthathaka zombane ezinokuthi zonakaliswe ngama-spikes ombane, i-surges, ukutshitshiswa kombane, ukubethelwa kombane, njl njl. Ukusetyenziswa kweenkqubo zokukhusela i-surge kucetyiswa kakhulu ukukhusela nokwandisa ubomi bezixhobo zakho. Isaziso sokhuseleko nokusebenza
Musa ukufaka endaweni okanye usebenzise naluphi na unikezelo lwamandla ngaphandle kweemveliso zothungelwano ezivunyiweyo ze-PoE okanye unikezelo lwamandla oluvunyiweyo lwe-Blustream.
Musa ukuqhaqha iyunithi ye-ACM200 / ACM210 nangasiphi na isizathu. Ukwenza njalo kuya kuphelisa iwaranti yomenzi.

Intshayelelo

I-platform yethu yokusabalalisa i-Multicast ivumela ukuhanjiswa kwevidiyo ye-HDMI phezu kokutshintshwa kwenethiwekhi elawulwayo. I-ACM200 & ACM210 Advanced Control Modules (eyaziwa ngokuba yi-'ACM' ukusuka kweli nqaku ukuya phambili kwesi sikhokelo) ivumela ukulawulwa kweqela lesithathu eliphezulu le-Blustream Multicast inkqubo usebenzisa i-TCP / IP, i-RS-232 kunye ne-IR.
I-ACM ibandakanya a web Imodyuli yojongano lolawulo kunye noqwalaselo lwenkqubo yeMulticast kunye neempawu 'tsala & Lahla' ukhetho lomthombo kunye nemidiya yangaphambiliview kunye nomzila ozimeleyo weVidiyo, iAudio (kungekhona kwiinkqubo ze-IP50HD), IR, RS232, kunye ne-USB / KVM. Abaqhubi bemveliso ye-Blustream eyakhiwe ngaphambili yenza lula ukufakwa kwemveliso ye-Multicast kwaye igatye imfuno yokuqonda iziseko zenethiwekhi ezinzima.
Esi sikhokelo somsebenzisi sigubungela iimpawu kunye nokusebenza kuzo zombini i-ACM200 kunye ne-ACM210 yeemveliso zeModyuli yoLawulo oluPhezulu olusuka kwi-Blustream.
I-ACM200 okwangoku isetyenziselwa i-IP50HD, IP200UHD kunye ne-IP250UHD iinkqubo kuphela.
I-ACM210 ingasetyenziselwa inkqubo ye-IP50HD, IP200UHD, IP250UHD, IP300UHD kunye ne-IP350UHD.
Nceda uqaphele: IP200UHD kunye ne-IP250UHD iinkqubo ziyasebenzisana. Iinkqubo ze-IP300UHD kunye ne-IP350UHD ziyasebenzisana.
I-IP50HD yinkqubo ezimele kwaye ayisebenzisani nayo nayiphi na kwezi 2 iiseti ze-Multciast systems.

Iimbonakalo

• Web Imodyuli yojongano loqwalaselo kunye nolawulo lwenkqubo yeBlustream Multicast
• I-Intuitive 'Rhawula & Lahla' ukhetho lomthombo kunye nevidiyo yangaphambiliview uphawu lokuhlola olusebenzayo lwemo yenkqubo
• Ulawulo oluphezulu lwesignali yomzila ozimeleyo weVidiyo, iAudio, IR, RS-232, kunye ne-USB/KVM
• Uqwalaselo lwenkqubo ezenzekelayo
• I-2x RJ45 uqhagamshelo lwe-LAN ukubhuloza inethiwekhi ekhoyo kwinethiwekhi yokusasazwa kwevidiyo yeMulticast, okukhokelela ku:
  -Ukusebenza ngcono kwenkqubo njengoko itrafikhi yenethiwekhi yahluliwe
  -Akukho seto lwenethiwekhi ephezulu efunekayo
  -Idilesi ye-IP ezimeleyo ngoqhagamshelo lwe-LAN
  -Ivumela ulawulo lwe-TCP / IP olulula lwenkqubo ye-Multicast
• Ukuhlanganiswa kwe-RS-232 yokulawula inkqubo ye-Multicast
• Ukudityaniswa kwe-IR kulawulo lwenkqubo yeMulticast
• I-PoE (Amandla phezu kwe-Ethernet) ukunika amandla i-ACM ukusuka kwi-PoE switch
• Unikezelo lwamandla lwe-12V yendawo (ukhetho) kufuneka lutshintshe lungaxhasi i-PoE
• Inkxaso ye-iOS kunye nolawulo lweApp ye-Android (khangela: "Trala kwaye uwise Ulawulo")
• Abaqhubi beqela lesithathu abakhoyo kwiimpawu ezininzi zolawulo

Inqaku elibalulekileyo:
Inkqubo ye-Blustream Multicast isasaza ividiyo ye-HDMI kwi-hardware yenethiwekhi elawulwayo. Kucetyiswa ukuba iimveliso ze-Blustream Multicast zixhunyiwe kwi-switch network ezimeleyo (okanye i-VLAN) ukukhusela ukuphazamiseka okungadingekile, okanye ukunciphisa ukusebenza kwesignali ngenxa yeemfuno ze-bandwidth yeemveliso zenethiwekhi.
Nceda ufunde kwaye uqonde imiyalelo ekule ncwadana kwaye uqinisekise ukuba iswitshi yenethiwekhi iqwalaselwe ngokuchanekileyo phambi kokudibanisa nayiphi na imveliso yeBlustream Multicast. Ukungaphumeleli ukwenza oko kuya kubangela iingxaki ngokucwangciswa kwenkqubo kunye nokusebenza kwevidiyo.

Iinkcazelo zePhaneli – ACM200 & ACM210

1. I-RS-232 yokulawula i-port - qhagamshela kwisixhobo sokulawula umntu wesithathu ukulawula inkqubo ye-Multicast usebenzisa i-RS232.
2. Uphuculo lwe-MCU yokuguqula - sebenzisa xa uphucula i-firmware ye-MCU kuphela. Shiya kwindawo eqhelekileyo yokusebenza okusemgangathweni.
3. Ukuseta kwakhona - ucinezele omfutshane uqalise kwakhona i-ACM, ucinezele ixesha elide (imizuzwana ye-10) i-factory defaults i-ACM.
4. Ukutshintsha kweNqanaba le-IO-kugcinelwe ukusetyenziswa kwixesha elizayo.
5. IO Level phoenix – igcinelwe ukusetyenziswa kwixesha elizayo.
6. I-LAN yevidiyo (i-PoE) - qhagamshela kwi-network switch apho i-Blustream Multicast amacandelo axhunyiwe.
7. Lawula izibuko le-LAN - qhagamshela kwinethiwekhi ekhoyo apho inkqubo yolawulo lomntu wesithathu ehlala kuyo. Ulawulo lwezibuko lwe-LAN lusetyenziselwa ulawulo lweTelnet/IP lwenkqubo yeMulticast. Hayi iPoE.
8. I-IR Ctrl (igalelo le-IR) - i-3.5mm ye-stereo jack. Qhagamshela kwinkqubo yolawulo yomntu wesithathu ukuba usebenzisa i-IR njengendlela ekhethiweyo yokulawula inkqubo yeMulticast. Xa usebenzisa i-stereo eyi-3.5mm efakiweyo kwintambo ye-mono, qinisekisa ukuba intambo yentambo ichanekile.
9. IR - lungisa umthamo we-IRtage inqanaba phakathi 5V okanye 12V igalelo IR Ctrl.
10. Isalathisi samandla e-LED
11. Isibuko samandla - sebenzisa i-12V 1A i-adapter ye-DC (ethengiswa ngokwahlukileyo) ukuba awusebenzisi i-PoE network switch.

I-ACM Control Ports

Amazibuko onxibelelwano e-ACM abekwe kuzo zombini iipaneli zokuphela kwaye abandakanya uqhagamshelo olulandelayo:

Uqhagamshelo:
A. TCP/IP – yolawulo lwenkqubo yeMulticast (i-RJ45 isidibanisi)
B. Igalelo le-Infrared (IR)* – 3.5mm ijekhi yestereo – ye-Multicast I/O yolawulo lokutshintsha kuphela
C. RS-232 - yokulawula inkqubo ye-Multicast / RS-232 ukudlula (DB9)
* Nceda uqaphele: i-ACM200 ingasetyenziswa kunye neenkqubo zombini ze-5V kunye ne-12V ze-IR. Nceda uqinisekise ukuba iswitshi (ekufuphi ne-IR port) ikhethwe ngokuchanekileyo kwinkcazo yegalelo lomgca we-IR kwinkqubo yokulawula.
TCP/IP:
I-ACM ye-Blustream inokulawulwa nge-TCP / IP. Kuluhlu olupheleleyo lwemithetho elandelwayo nceda ubone uxwebhu olwahlukileyo lwe-'API lwemiyalelo' olunokukhutshelwa kwi-Blustream webindawo. Ipetshi 'ethe ngqo' iRJ45 kufuneka isetyenziswe xa iqhagamshelwe kwisitshixo sothungelwano.
Izibuko lokulawula: 23
Ukungagqibeki kwe-IP: 192.168.0.225
Igama lomsebenzisi elihlala likhona: admin
Igama Lokugqithisa eliMiselweyo: 1 2 3 4
Nceda uqaphele: kwi-log-in yokuqala kwi-ACM, kuya kufuneka kufakwe igama eliyimfihlo elitsha. Akunakwenzeka ukuseta kwakhona oku ngaphandle kokusetha kwakhona iyunithi ye-ACM. Nceda uqinisekise ukuba igama lokugqithisa elitsha libhaliwe kwaye ligcinelwe ireferensi kwixesha elizayo.
RS-232 / Uthotho:
I-ACM inokulawulwa nge-serial usebenzisa i-DB9 ikhonkco. Useto oluhlala lukhona ngezantsi. Kuluhlu olupheleleyo lwemithetho elandelwayo nceda ubone uxwebhu olwahlukileyo lwe-'API lwemiyalelo' olunokukhutshelwa kwi-Blustream webindawo.
Ixabiso leBaud: 57600
Ibit yedatha: 8-bit
Xabiso:Ayikho
Misa kancinci: 1-bit
Ulawulo lokuqukuqela: Akukho
Ireyithi ye-baud ye-ACM inokulungiswa ngokusebenzisa i web-GUI, okanye ngokukhupha lo myalelo ulandelayo ngeRS-232 okanye iTelnet:
I-RSB x : Misela i-RS-232 i-Baud Rate ukuya kwi-X bps
Apho X = 0 : 115200
1: 57600
2: 38400
3: 19200
4: 9600

I-ACM Control Ports - Ulawulo lwe-IR

Inkqubo ye-Multicast inokulawulwa ngokusebenzisa ulawulo lwe-IR yendawo ukusuka kwinkqubo yokulawula umntu wesithathu. Ukukhethwa komthombo yinkalo yodwa ekhoyo xa usebenzisa ulawulo lwe-IR yendawo - iimpawu eziphambili ze-ACM ezifana nemodi yodonga lwevidiyo, ukubethelwa kwe-audio njl.
I-Blustream yenze igalelo le-16x kunye ne-16x ye-IR ye-IR ephumayo evumela ukukhetha umthombo ukuya kuthi ga kwi-16x ii-Multicast Transmitters ukuya kuthi ga kwi-16x ye-Multicast Receivers. Kwiinkqubo ezinkulu kunezixhobo zemithombo ye-16x, i-RS-232 okanye ulawulo lwe-TCP / IP luya kufuneka.

I-ACM iyahambelana nezixhobo zombini ze-5V kunye ne-12V IR. Xa i-ACM isetyenziselwa ukufumana igalelo le-IR kwizibuko le-IR CTRL, iswitshi esecaleni kufuneka iguqulwe ngokuchanekileyo ukuze ihambelane nevolthi ye-IR.tagumgca wendlela ekhethiweyo yolawulo phambi koxhulumaniso.
Nceda uqaphele: i-Blustream IR cabling ebonelelweyo yiyo yonke i-5V
I-3.5mm Stereo ukuya kwiCable yeMono – IR-CAB (ibandakanyiwe)
Intambo yokulawula i-IR ye-Blustream 3.5mm Mono kwi-3.5mm Stereo yokudibanisa izisombululo zokulawula umntu wesithathu kwiimveliso ze-Blustream.
Iyahambelana ne-12V IR yeemveliso zomntu wesithathu.
Nceda uqaphele: Ikhebula isalathisa njengoko kubonisiwe

Isamkeli se-IR – IRR – ijekhi ye-stereo eyi-3.5mm (ukhetho)
I-Blustream 5V i-IR receiver ukufumana isignali ye-IR kwaye isasazwe ngeemveliso ze-Blustream

Iphini yocingo-IR-CAB-ijekhi ye-stereo eyi-3.5mm:

Iphini yocingo-IR-CAB-mono 3.5mm jack:

UQhagamshelwano lwenethiwekhi ye-ACM

I-ACM isebenza njengebhuloho phakathi kwenethiwekhi yolawulo kunye nenethiwekhi yevidiyo ukuze kuqinisekiswe ukuba idatha ehambayo phakathi kwamanethiwekhi amabini ayixutywanga. I-ACM kufuneka iqhagamshelwe ngentambo ye-CAT ngokuhambelana neemfuno zenethiwekhi eziqhelekileyo.

Web-GUI Guide

I web-GUI ye-ACM ivumela uqwalaselo olupheleleyo lwenkqubo entsha, kunye nokugcinwa okuqhubekayo kunye nokulawulwa kwenkqubo ekhoyo ngokusebenzisa web portal.
I-ACM (ekugqibeleni) inokufumaneka kuso nasiphi na isixhobo esiqhagamshelwe kwi-intanethi kuquka: iitafile, ii-smart phones kunye neelaptops ezikuthungelwano 'loLawulo' olufanayo. I-ACM ithunyelwa ngedilesi ye-IP engatshintshiyo (njengasezantsi), kwaye ayimiselwanga nge-DHCP enikwe amandla.

Sayina / Ngena

Singacebisa ukuba ikhompyuter / ilaptop iqhagamshelwe ngokuthe ngqo kwizibuko loLawulo lwe-ACM kuqwalaselo lokuqala lwenkqubo entsha. Njengoko kuphawuliwe ngaphambili, i-ACM ithunyelwa ngedilesi ye-IP engatshintshiyo, kungekhona i-DHCP. Kukho imiyalelo yendlela yokulungisa idilesi ye-IP engatshintshiyo yekhompyuter / ilaptop ngasemva kule ncwadana.
Ukuloga ngaphakathi, vula i web umkhangeli zincwadi (oko kukuthi, iSafari, iFirefox, iMS Edge njl.njl

Iphepha lokungena linikezelwe kuqhagamshelo kwi-ACM. I-password yomlawuli omiselweyo yile: 1 2 3 4
I-ACM ifuna igama eliyimfihlo elitsha ukuba limiselwe kuMlawuli ekungeneni kokuqala. Akunakwenzeka ukuseta kwakhona oku ngaphandle kokusetha kwakhona iyunithi ye-ACM. Nceda uqinisekise ukuba igama lokugqithisa elitsha libhaliwe kwaye ligcinelwe ireferensi kwixesha elizayo. Nje ukuba igama lokugqithisa elitsha lenziwe, i-ACM iya kufuna oku kube kanye ukuba ingene kwimenyu yolawulo yeyunithi.

IWizadi yokuSeta iProjekthi eNtsha

Kwi-log yokuqala ye-ACM, i-Wizard yokuSeta yokumisela onke amacandelo e-Multicast system iya kuboniswa. Oku kulungiselelwe ukukhawulezisa ukucwangciswa kwenkqubo entsha njengoko yonke into engagqibekanga / entsha ye-Multicast Transmitters & Receivers inokudityaniswa kwi-network switch ngexesha elinye, ngelixa lingabangeli ukungqubuzana kwe-IP ngexesha lokucwangciswa kwenkqubo. Oku kubangela inkqubo apho onke amacandelo azenzekela kwaye abelwe ngokulandelelana igama kunye nedilesi ye-IP elungele ukusetyenziswa kwenkqubo esisiseko.

I-ACM Set-up Wizard inokurhoxiswa ngokucofa 'Vala'. Nceda qaphela ukuba isixokelelwano asiyi kumiselwa ngoku, kodwa ingaqhutyekwa ngokundwendwela imenyu 'yeProjekthi'. Ukuba iProjekthi File sele ikhona (okt endaweni ye ACM kwindawo esele ikhona), oku kungangeniswa ngaphandle ngokusebenzisa egciniweyo .json file ngokucofa u-'Import Project'.
Cofa 'Okulandelayo' ukuqhubeka nokuseta:

Ukuba ngeli xesha iNethiwekhi yehardware ekhethiweyo ayilungiselelwanga ukusetyenziswa ngenkqubo yeBlustream Multicast, nqakraza kwikhonkco 'inethiwekhi tshintsha izikhokelo zokucwangcisa' ukuya kwindawo esembindini. webiphepha eliqulethe iziKhokelo zoTshintsho zeNethiwekhi eziqhelekileyo.
Umdalaample schematic diagram yodibaniso lweACM inokufikelelwa ngokucofa i-hyperlink ephawulwe 'diagram'. Oku kuya kuqinisekisa ukuba i-ACM iqhagamshelwe ngokuchanekileyo kwisistim ye-Multicast ebanzi phambi kokuba i-Set-up Wizard iqale. Nje ukuba udibaniso lwe-ACM luqinisekisiwe, cofa 'Okulandelayo'.
Ngethuba lokusetyenziswa okuqhelekileyo, i-ACM iya kuvotela ukuhlaziywa kwesimo kunye ne-screen-grabs yemidiya ehamba ngenkqubo. Ukuvota kolu lwazi kuhlala kunefuthe kunye neenkqubo ezinkulu (i-75+ amanqaku okuphela). Inqaku elilandelayotage yoqwalaselo kukuchaza kwangaphambili ubungakanani beprojekthi. Ukhetho apha lu:
0-75 Iimveliso
75+ Iimveliso
Olu seto lunokulungelelaniswa kwixesha elizayo ukuba ubungakanani benkqubo bonyukile.
Cofa kwiqhosha elifanelekileyo ukukhetha ubungakanani benkqubo:

Kukho iindlela ezimbini zokongeza izixhobo ezitsha zeTransmitter kunye neReceiver kwinkqubo:
Indlela yoku-1: qhagamshela ZONKE iiyunithi zeTransmitter kunye neReceiver kwiswitshi yenethiwekhi. Le ndlela iya kucwangcisa ngokukhawuleza zonke izixhobo ezineedilesi zabo ze-IP ezisekelwe koku kulandelayo:
Abadlulisi:
I-Transmitter yokuqala iya kunikwa idilesi ye-IP ye-169.254.3.1. I-Transmitter elandelayo iya kunikwa idilesi ye-IP ye-169.254.3.2, njalo njalo….
Nje ukuba uluhlu lwe-IP lwe-169.254.3.x lugcwaliswe (iiyunithi ezingama-254), isoftware iya kwabela ngokuzenzekelayo idilesi ye-IP ye-169.254.4.1, njalo njalo...
Nje ukuba uluhlu lwe-IP lwe-169.254.4.x luzaliswe isoftware iya kwabela ngokuzenzekelayo idilesi ye-IP ye-169.254.5.1, njalo njalo de kube ngu-169.254.4.254
Abamkeli:
Umamkeli wokuqala uya kunikwa idilesi ye-IP ye-169.254.6.1. Umamkeli olandelayo uya kunikwa idilesi ye-IP ye-169.254.6.2, njalo njalo….
Nje ukuba uluhlu lwe-IP lwe-169.254.6.x lugcwaliswe (iiyunithi ezingama-254) isoftware iya kwabela ngokuzenzekelayo idilesi ye-IP ye-169.254.7.1, njalo njalo...
Nje ukuba uluhlu lwe-IP lwe-169.254.7.x luzaliswe isoftware iya kwabela ngokuzenzekelayo idilesi ye-IP ye-169.254.8.1, njalo njalo de kube ngu-169.254.8.254
Nje ukuba zigqitywe, izixhobo ziya kufuneka zichongwe ngesandla - le ndlela iya kwabela ngokuzenzekelayo iidilesi ze-IP zemveliso kunye ne-ID kwisixhobo ngasinye esiqhagamshelwe kwisitshixo sothungelwano ngokungenamkhethe (hayi ngokutshintsha izibuko).
Indlela yoku-2: qhagamshela i-Blustream Multicast Transmitter nganye kunye neReceiver kwinethiwekhi enye-nganye. IWizard yoSeto iya kucwangcisa iiyunithi ngokulandelelana njengoko ziqhagamshelwe / zifunyenwe. Le ndlela ivumela ulawulo lonikezelo olulandelelanayo lweedilesi ze-IP kunye nee-ID zemveliso nganye - iiyunithi zeTransmitter / Receiver zinokubhalwa ngokufanelekileyo.
… jonga kwiphepha elilandelayo ngenkcazelo yeNdlela yeHDCP
Imowudi ye-HDCP: I-Blustream Multicast Receivers zongeza ngokuzenzekelayo i-HDCP efanelekileyo kumlambo ophumayo (kungakhathaliseki ukuba isixhobo somthombo sine-HDCP ekhowudiweyo kumsinga ophumayo).
Amaqhosha e-radial Mode ye-HDCP avumela ukuba i-HDCP inyanzeliswe, okanye ilandele ukuthotyelwa okuqhelekileyo.
Xa usebenzisa izixhobo zorhwebo (ezifana nezixhobo zeVC) apho kungekho HDCP ekhowudiweyo kwimveliso yesignali yomthombo, kunye nezixhobo ezingahambelaniyo ze-HDCP zisetyenziswa kwi-RX / imveliso (oko kukuthi isoftware yokubamba), siya kucebisa ukuseta inkqubo ukuba 'yiNqamle'.
Ukuhambisa imowusi phezu kwesimboli esincinci "solwazi" (ephawulwe kumfanekiso wekhusi ongezantsi ngeblue) inika ingcaciso ngaphakathi kweGUI.
Nceda qaphela: Imo 'yendlela yokugqitha' 'ayiyihlubuki' i-HDCP kwisignali ye-HDMI. Ukuba ikwimo ye 'Bypass', uphawu lwe-HDCP1.x luya kubangela ukuba i-HDCP1.x igqithwe kwisixokelelwano. Ukuba akukho HDCP kwisiginali, iiyunithi zeMulticast aziyi kongeza i-HDCP ukuba 'kwi-Bypass'.
Nje ukuba indlela yokumisela yokuqwalasela inkqubo sele ikhethiwe, cinezela iqhosha elithi 'Qala ukuSkena' (liphawulwe ngezantsi).
I-ACM iya kukhangela iiyunithi ezintsha ze-Blustream Multicast kwinethiwekhi, kwaye iya kuqhubeka nokukhangela izixhobo ezitsha kude kube lixesha elinje:
– Iqhosha eliluhlaza elithi 'Stop Scan' licinezelwe
-Iqhosha eliluhlaza 'Okulandelayo' licinezelwe ukuqhubela phambili iWizard yokuSeta emva kokuba zonke iiyunithi zifunyenwe.

Njengoko iiyunithi ezintsha zifunyenwe yi-ACM, iiyunithi ziya kuphuma kwiikholam ezifanelekileyo eziphawulwe ngokuba zii-Transmitters okanye iiReceivers.
Kuyacetyiswa ukuba uleyibhelishe iiyunithi zomntu ngamnye kweli nqanaba.
Iiyunithi zeMulticast ziya kucwangciswa ngolwazi olutsha lwedilesi ye-IP kweli nqanaba, kwaye iya kuqalisa ngokuzenzekelayo.
Nje ukuba zonke iiyunithi zifunyenwe kwaye ziqwalaselwe, cofa u-'Stop Scan', emva koko 'Okulandelayo'.
Iphepha lokuSeta isiXhobo livumela ukuba ii-Transmitters kunye nabaFundi babizwe ngokufanelekileyo. I-EDID kunye ne-Scaler useto lwe-Transmitter okanye i-Receivers nganye inokusetwa njengoko kufuneka. Ngoncedo nge-EDID kunye noseto lwe-Scaler, cofa amaqhosha afanelekileyo abhalwe 'EDID Help' okanye 'Scaling Help'.

Iimpawu zephepha lokumisela iSixhobo ziquka:

1. Igama leZixhobo - ngexesha lokucwangciswa kwe-Transmitter / Abamkeli banikezelwa ngokuzenzekelayo amagama angagqibekanga okt i-Transmitter 001 njl njl. Amagama oThutho / owamkeliyo anokulungiswa ngokuchwetheza kwibhokisi ehambelanayo.
2. I-EDID - lungisa ixabiso le-EDID kwi-Transmitter nganye (umthombo). Oku kusetyenziselwa ukucela isisombululo esithile sevidiyo kunye nesandi kwisixhobo somthombo sokukhupha. Uncedo olusisiseko ngokhetho lwe-EDID lunokufunyanwa ngokucofa iqhosha elibhalwe 'EDID Help'. Nceda uqaphele, i-EDID engagqibekanga yezixhobo zeBlustream yile: 1080p, 2ch audio.
3. View (Abathumeli kuphela) – ivula ezi pop-up zilandelayo:Le pop-up ibonisa umfanekiso wangaphambiliview yosasazo olwamkelwayo ngoku licandelo loThutho ngeenjongo zokuthiya amagama. Ukukwazi ukuchonga iyunithi ngokudanyaza iphaneli yangaphambili Amandla e-LED kwiyunithi, kunye nokukwazi ukuQalisa kwakhona iyunithi kuya kunceda ngokuchongwa kweyunithi ngeenjongo zokuthiya amagama.
4. I-Scaler - lungisa isisombululo sesiphumo usebenzisa i-scaler eyakhelwe-ngaphakathi yevidiyo ye-Multicast Receiver. I-Scaler iyakwazi ukunyusa kunye nokuthoba isignali yevidiyo engenayo.
5. Iintshukumo - ivula ezi pop-up zilandelayo:Ngokungagqibekanga, ngexesha lokucwangciswa, i-OSD iya kubonakala kuzo zonke izikrini eziqhagamshelwe kwiiyunithi zoMmkeli ukuze kuchongwe ngokulula abaFundi. Ukukwazi ukuchonga iiyunithi ngokudanyaza indawo yolawulo yangaphambili Amandla e-LED, kunye nokubanakho ukuQalisa ngokutsha iyunithi kuqulethwe apha.
6. Cima i-OSD / Vula - guqula i-ID yemveliso kuzo zonke izikrini / iziboniso eziqhagamshelweyo (zivulwe ngokungagqibekanga ngexesha loqwalaselo - i-OSD iya kucima ngokuzenzekelayo njengoko iwizadi iqhubeka).
7. Okulandelayo - iqhubeleka ukuya kwi-Set-up Wizard Completion page

Iphepha le-Wizard Completion ligqibezela inkqubo yoqwalaselo olusisiseko, ukubonelela amakhonkco asetyenziswa ngokuqhelekileyo kwiinketho zokuseta eziphambili kwiiWall zeVidiyo (azifumaneki kwiinkqubo ze-IP50HD), i-Fixed Signal Routing (IR, RS-232, Audio njl), kunye nokukwazi ukubuyisela kuqwalaselo. file (kucetyiswa).
Cofa u-'Gqiba' xa sele ugqibile ukuqhubeka uye kwiphepha 'lotsalo kunye noLahla'.

Web-GUI – Menu Overview

Imenyu 'yeNdibaniselwano yoMsebenzisi' inika umsebenzisi otyeleleyo amandla okutshintsha nangaphambiliview inkqubo yeMulticast ngaphandle kokuvumela ukufikelela kuzo naziphi na iisetingi ezinokulungisa iziseko zophuhliso zenkqubo.

1. Tsala kunye noLawula uLawulo-ulawulo lokukhetha umthombo kwi-Multicast Receiver nganye kubandakanya umfanekiso wangaphambiliview yezixhobo zomthombo kuyo yonke inkqubo
2. Ulawulo lweWall yeVidiyo- esetyenziselwa 'ukutsalwa nokulahla' ulawulo lomthombo wokhetho loluhlu lwevidiyo ngaphakathi kwesistim, kubandakanywa nomfanekiso wangaphambili.view yezixhobo zomthombo kulo lonke. Into yemenyu ifumaneka kuphela apho udonga lwevidiyo lumiselwe ngaphakathi kwisistim
3. Ngena-isetyenziselwa ukungena kwisistim njengoMsebenzisi, okanye uMlawuli

Imenyu yoMlawuli ifumaneka kwigama lokugqitha elinye njengoko kusetiwe ngexesha lokuseta okokuqala. Le menyu ivumela inkqubo ye-Multicast ukuba iqwalaselwe ngokupheleleyo, kunye nokufikelela kuzo zonke izicwangciso kunye neempawu zenkqubo.
Nceda uqaphele: akukhuthazwa ukuba ushiye ufikelelo loMlawuli okanye igama eliyimfihlo loMlawuli kunye nomsebenzisi wokugqibela.

1. Tsala & Lahla Ulawulo-ulawulo lokukhetha umthombo kwi-Receiver nganye kuquka umfanekiso wangaphambiliview yezixhobo zomthombo
2. Ulawulo lweWall yeVidiyo-ulawulo lokukhethwa komthombo kwiindonga zevidiyo, kubandakanywa nomfanekiso wangaphambiliview yezixhobo zomthombo
3. Phambiliview -bonisa ividiyo esebenzayo evela kuyo nayiphi na iTransmitter eqhagamshelweyo kunye/okanye uMamkeli
4. Iprojekthi- view okanye uqwalasele inkqubo entsha okanye ekhoyo yeBlustream Multicast
5. Ii-Transmitters- isishwankathelo sazo zonke ii-Transmitter ezifakiweyo, ezinokhetho lolawulo lwe-EDID, ukujonga uhlobo lwe-FW, ukuhlaziya useto, ukongeza ii-TX's ezintsha, ukutshintshwa okanye ukuqalisa kwakhona iimveliso.
6. Abamkeli-isishwankathelo sazo zonke iiReceivers ezifakiweyo, ezinokhetho lwesisombululo (HDR / scaling), umsebenzi (imowudi yodonga lwevidiyo / i-matrix), ukuhlaziya useto, ukongeza ii-RX's ezintsha, ukutshintshwa okanye ukuqalisa kwakhona iimveliso.
7. Ukuhanjiswa kweSignali eZinzileyo - qwalasela indlela ezimeleyo yeVidiyo, iAudio, i-IR, uthotho, i-USB, okanye imiqondiso yeCEC
8. Ulungelelwaniso lweWall yeVidiyo - ukuseta kunye noqwalaselo lwabaFundi ukwenza uluhlu lwevidiyo oluya kuthi ga kwi-9 × 9, kubandakanya: imbuyekezo ye-bezel / i-gap, ukolula / kufanelekile, kunye nokujikeleza. (Nceda uqaphele: iindonga zevidiyo azixhaswanga ngeenkqubo ze-IP50HD).
9. Abasebenzisi-seta okanye ulawule abasebenzisi benkqubo
10. Izicwangciso - izicwangciso zenkqubo ezibandakanya: iziqinisekiso zenethiwekhi, iprojekthi yokucoca, kunye nokusetha kwakhona i-ACM
11. Hlaziya izixhobo - sebenzisa uhlaziyo lwamva nje lwe-firmware kwi-ACM, kwaye uqhagamshele ii-Transmiters / Receivers
12. Hlaziya igama lokugqithisa – hlaziya iinkcazi zephasiwedi zoMlawuli ukuze ufikelele kwi-ACM web-GUI
13. Phuma ngaphandle - khupha uMsebenzisi / uMlawuli wangoku

Web-GUI – Tsala & Lahla Ulawulo

Iphepha Lolawulo lotsalo noLahla lisetyenziselwa ngokukhawuleza nangokuqondayo igalelo lomthombo (Transmitter) kumboniso ngamnye (okanye Konke) (uMfumani). Ingqungquthela yamagama eZithuthi kunye nabaFundi iya kuhlaziywa ngokwamagama anikezelweyo ngexesha lokucwangciswa, okanye njengoko ihlaziywe kuMthumeli okanye amaphepha oMfumani.
Nje ukuba inkqubo iqwalaselwe ngokupheleleyo i-Drag & Lahla Control page iya kubonisa zonke ii-Transmitter kunye ne-Receiver ze-intanethi. Zonke iimveliso ze-Multicast ziya kubonisa umjelo osebenzayo ovela kwisixhobo, esihlaziya yonke imizuzwana embalwa.
Ngenxa yobungakanani befestile yokubonisa kwiifowuni ezithile, iitafile okanye iilaptops, ukuba inani leeTransmitter kunye nabaFumana likhulu kunobukhulu obukhoyo kwiscreen, uMsebenzisi unikwa amandla okuskrola / ukuswayipha ngokusebenzisa izixhobo ezikhoyo (ekhohlo ukuya ekunene).

Ukutshintsha imithombo, cofa kumthombo ofunekayo / isiThuthi, kwaye utsale i-preview kwi-Receiver efunekayo ngaphambiliview.
Umamkeli ngaphambiliview iwindow izakuhlaziya ngomlambo wemvelaphi ekhethiweyo.
I-Drag & Drop switch iya kulungisa iVidiyo / i-Audio stream ukusuka kwi-Transmitter ukuya kwi-Receiver, kodwa i-Fixed Routing yeempawu zokulawula.
Ngaba 'Akukho Mqondiso' iboniswe kwiTransmitter kwangaphambiliview window, nceda ujonge isixhobo somthombo we-HDMI sinikwe amandla, sikhupha umqondiso, kwaye siqhagamshelwe ngentambo ye-HDMI kwi-Transmitter. Khangela kwakhona useto lwe-EDID lwesixhobo soThutho luyasebenza kunye nomthombo osetyenziswayo.
Ukuba 'Akukho Mqondiso' iboniswe ngaphakathi koMamkeli ngaphambiliview window, khangela iyunithi iqhagamshelene kwaye inikwe amandla kuthungelwano (tshintsha), kwaye inodibaniso olusebenzayo kwiyunithi esebenzayo yoThutho.
Kufuneka 'Akukho Mboniso' uboniswe ngaphakathi koMamkeli ngaphambiliview window, khangela isiboniso esiqhagamsheleneyo sinikwe amandla kwaye sinoqhagamshelo olusebenzayo lwe-HDMI kwi-Receiver.
Kukho ifestile 'Bonke abaFumana' ebekwe ekhohlo kwifestile yabaFundi. Ukutsala kunye nokulahla i-Transmitter kule festile kuya kutshintsha indlela yabo BONKE abaFumana ngaphakathi kwindlela yokubukela umthombo okhethiweyo. Ngaba kwangaphambiliview yale festile ibonisa ilogo ye-Blustream, oku kuthetha ukuba kukho umxube wemithombo ejongwayo ngapha kwabaFundi ngaphakathi kwinkqubo. Inqaku elingaphantsi elithi 'Bonke abaFumana' liya kubonisa: 'TX: Different' ukubonisa oku.
Nceda qaphela: i Utsalo & uLawula iphepha iphepha likwayiphepha lasekhaya kumsebenzisi weeNdwendwe osebenzayo wenkqubo ye-Multicast- kuphela imithombo apho undwendwe okanye uMsebenzisi anemvume yoku. view iya kubonakala.
Abamkeli kwiMowudi yoDonga lweVidiyo ababoniswa kwiphepha lotsalo noLahla.

Web-GUI – Ulawulo Wall Video

Ukunceda kunye nolawulo olulula lweVidiyo yokutshintsha iWall, kukho iVidiyo eyahlukileyo yoTsalo kunye noLawula iphepha lokuLawula iphepha. Olu khetho lwemenyu lufumaneka kuphela xa uDonga lweVidiyo luqwalaselwe ngaphakathi kwe-ACM / inkqubo ye-Multicast.

Umthombo (Transmitter) preview Iifestile ziboniswe phezulu ephepheni kunye nomzobo womzobo woDonga lweVidiyo uboniswe ngezantsi. Ukutshintsha uluhlu lweWall yeVidiyo ukusuka komnye umthombo ukuya komnye, Tsala & Lahla umthombo ngaphambiliview window kwiWall Video preview ngaphantsi. Oku kuya kutshintsha zonke izikrini eziqhagamshelwe ngaphakathi koDonga lweVidiyo (ngaphakathi kweqela ngaphakathi koDonga lweVidiyo kuphela) kumthombo ofanayo / uThutho kuLungiselelo olukhethiweyo ngoku (kwiqela). Okanye tsala kwaye ulahle iTransmitter ngaphambiliview kwisikrini 'eSinye' xa uluhlu lwevidiyo yodonga ikubumbeko lwesikrini somntu ngamnye.
Iinkqubo zeBlustream Multicast zinokuba neeNdonga zeVidiyo ezininzi (IP2xxUHD, okanye IP3xxUHD iinkqubo kuphela). Ukukhetha uluhlu olwahlukileyo lweWall yeVidiyo, okanye ukubeka ulungelelwaniso oluchazwe kwangaphambili / ukusetwa kwangaphambili kwiWall nganye yeVidiyo kunokuqhutywa ngokusebenzisa iibhokisi zokuhla ezingaphezulu komzobo weWall yeVidiyo. Olu phawu lomzobo luza kuhlaziya ngokuzenzekelayo njengoko ukhetha udonga lwevidiyo olwahlukileyo okanye uqwalaselo.
Ukuba isikrini ngaphakathi kodonga lweVidiyo lubonise kwi-GUI bonisa 'i-RX ayibelwanga', oku kuthetha ukuba i-Video Wall ayinayo iyunithi yoMamkeli eyabelwe uluhlu. Nceda ubuyele umva kuDonga lweVidiyo ukuseta ukwabela uMamkeli ngokufanelekileyo.
Kwimiyalelo ephambili ye-API yolawulo lweVideos Wall uluhlu ngaphakathi kwenkqubo, nceda ubhekisele kuxwebhu lomyalelo we-API olukhoyo ukukhuphela kwiBlustream webindawo.

Web-GUI – Preview

Ingaphambiliview uphawu yindlela ekhawulezayo ukuba view Imithombo yeendaba isasazwa ngenkqubo yeMulticast xa sele iqwalaselwe. Phambiliview umsinga ukusuka nakwesiphi na isixhobo somthombo we-HDMI ukuya kwi-Multicast Transmitter, okanye umsinga ofunyanwa nguye nawuphi uMamkeli kwinkqubo ngaxeshanye. Oku kunceda kakhulu ukulungisa ingxaki kunye nokujonga izixhobo zomthombo zinikwe amandla, kunye nokukhupha uphawu lwe-HDMI, okanye ukujonga imeko ye-I/O yenkqubo:

Ingaphambiliview Iifestile zibonisa uthango lwekhusi kwimidiya ehlaziya ngokuzenzekelayo rhoqo kwimizuzwana embalwa. Ukukhetha i-Transmitter okanye uMamkeli oza kuqalaview, sebenzisa ibhokisi eyehlayo ukukhetha i-Transmitter okanye uMamkeli oza kuqalaview.

Web-GUI – IsiShwankathelo seProjekthi

Ngaphezuluview yeeyunithi ezicwangcisiweyo ngoku kwinkqubo ye-Multicast, okanye ukuskena inethiwekhi yezixhobo ezitsha eziza kwabela inkqubo:

Ukhetho kweli phepha luquka:

1. Ubungakanani beNkqubo: guqula phakathi: 0-75 Products, kunye 75+ Products.
2. Guqula i-OSD: Vula / Vala i-OSD (kwiSiboniso seSkrini). Ukuguqula i-OSD On kubonisa inombolo ye-ID (okt ID 001) ye-Multicast Receiver kumboniso ngamnye njengokwalekayo kumajelo eendaba asasazwayo. Ukucima i-OSD kususa i-OSD.
3. Iprojekthi yokuThumela ngaphandle: yenza ugcino file (.json) kuqwalaselo lwangoku lwenkqubo.
4. Iprojekthi yokungeniswa ngaphandle: ngenisa iprojekthi esele iqwalaselwe kwinkqubo yangoku. Oku kuluncedo ngakumbi xa kumiselwa inkqubo yesibini okanye ukwandiswa kwenkqubo yangoku ngaphandle kwendawo apho ezi nkqubo zimbini zinokudityaniswa zibe nye.
5. Sula iProjekthi: icoca iprojekthi yangoku.
6. Yabela iZixhobo eziNtsha: nika izixhobo ezifunyenwe kwicandelo leZixhobo ezingabelwanga (ezantsi kweli phepha) kwinkqubo yangoku.
7. Ukuskena ngokuqhubekayo kunye nokunikezela ngokuzenzekela: qhubeka uskena inethiwekhi kwaye unikeze ngokuzenzekelayo izixhobo ezitsha zeMulticast kwi-ID ekhoyo elandelayo kunye nedilesi ye-IP njengoko iqhagamshelwe. Ukuba uqhagamshela iyunithi eNYE kuphela, sebenzisa 'Skena Kanye' ukhetho - i-ACM iya kuqhubeka nokuskena inethiwekhi yezixhobo ezitsha zeMulticast de ifumaneke, okanye ukhethe eli qhosha kwakhona ukuyekisa ukuskena.
8. Skena kanye: skena inethiwekhi kube kanye ngazo naziphi na izixhobo ezitsha zeMulticast eziqhagamshelwe, kwaye emva koko zinikezelwe nge-pop phezulu nokuba yabela ngesandla isixhobo esitsha, okanye yabela iyunithi entsha kwi-ID ekhoyo elandelayo kunye nedilesi ye-IP njengoko iqhagamshelwe.

Web-GUI – Transmitters

Iphepha lesishwankathelo seTransmitter liphelileview kuzo zonke izixhobo zoThutho eziye zamiselwa ngaphakathi kwesistim, ngokukwazi ukuhlaziya inkqubo njengoko kufuneka.

Iimpawu zephepha lesishwankathelo seTransmitter ziquka:

1. I-ID - inombolo ye-ID (igalelo) isetyenziselwa ukulawula inkqubo ye-Multicast xa usebenzisa iiplatifomu zokulawula umntu wesithathu.
2. Igama – igama elinikezelwe kwiTransmitter (ngokuqhelekileyo isixhobo esincanyathiselwe kwiTransmitter).
3. Idilesi ye-IP - idilesi ye-IP eyabelwe iTransmitter ngexesha lokucwangciswa.
4. Idilesi ye-MAC - ibonisa idilesi ye-MAC ye-Transmitter (i-LAN 1 port).
5. I-Dante MAC - ibonisa idilesi ye-MAC ye-port ye-LAN2 apho uqhagamshelwano oluzimeleyo lweDante lusetyenziswa. Nceda ubone iqhosha eliphawulwe Uncedo lweNdlela ye-LAN2 ngengcaciso eyongezelelekileyo ngokwahlula iinethiwekhi zeVidiyo kunye neDante.
6. Imveliso - ichonga imveliso esetyenziswayo eqhagamshelwe kwinkqubo.
7. I-Firmware-inguqulelo ye-firmware elayishwe ngoku kwiTransmitter. Ukuze ufumane inkcazelo engakumbi ngohlaziyo lwe-firmware, nceda ubone icandelo elithi 'Hlaziya iFirmware'.
8. Imo-ibonisa ubume be-Intanethi / ngaphandle kwe-intanethi ye-Transmitter nganye. Ukuba imveliso ibonakala 'njengeOffline', jonga uqhagamshelo lweyunithi kwiswitshi yenethiwekhi, isantya soqhagamshelwano kwinethiwekhi.
9. I-EDID - lungisa ixabiso le-EDID kwi-Transmitter nganye (umthombo). Oku kusetyenziselwa ukucela isisombululo esithile sevidiyo kunye nesandi kwisixhobo somthombo sokukhupha. Uncedo olusisiseko lunokufunyanwa kukhetho lwe-EDID ngokunqakraza iqhosha phezulu kwiphepha elibhalwe 'EDID Help'. Ukhetho olukhoyo lwe-EDID olusetyenziselwa i-IP50HD, IP2xxUHD, kunye neenkqubo ze-IP3xxUHD zonke ziyahluka.
10. I-HDMI Audio - ikhetha nokuba yi-audio ye-HDMI ye-original, okanye ibuyisela i-audio edibeneyo kunye negalelo lomsindo we-analogue yendawo kwi-Transmitter. Useto oluhlala lukhona luza kuba yi-'Auto'.
11. Imodi ye-LAN2: apho i-IP250UHD okanye i-IP350UHD isetyenziswa khona, kunokwenzeka ukwahlula i-audio ye-Dante yokudibanisa kwinethiwekhi ye-Dante eyahlukileyo ukusuka apha. Apho IP200UHD okanye IP300UHD zisetyenziswayo (akukho uxhumano lweDante), olu khetho alukhethi. Jonga itheyibhile engezantsi yokhetho lwe-LAN (ayifumaneki kwi-ACM firmware ye-IP50HD)
12. Iintshukumo – ivula ifestile ezivelelayo ezinoseto oluphezulu loqwalaselo. Jonga iphepha elilandelayo ngolwazi oluthe vetshe.
13. Hlaziya - hlaziya lonke ulwazi lwangoku kwizixhobo ezingaphakathi kwesistim.

IMODE yeVLAN	PoE/Lan	Eyesibini iRJ2	SFP
0 (okwendalo)	VoIP + Dante	Kukhubazekile	VoIP + Dante
1	IVoIP	Dante	Kukhubazekile
2	VolP/Dante	Landela izibuko lePoE/Lan	VoIP + Dante

Web-GUI – Transmitters – Actions

Iqhosha elithi 'Iintshukumo' livumela iimpawu eziphambili zeeyunithi ukuba zifikelelwe kwaye ziqwalaselwe.
Igama - Amagama oThunyelo anokulungiswa ngokufaka igama kwibhokisi yombhalo yasimahla. Nceda uqaphele: oku kukhawulelwe kwiimpawu ezili-16 ubude, kwaye ezinye iimpawu ezikhethekileyo zisenokungaxhaswa.
I-ID yohlaziyo - Abasebenzisi abaPhezulu Kuphela - i-ID yeyunithi imiselwe (njengengagqibekanga) kwinani elifanayo njengeenombolo ze-3 zokugqibela zeeyunithi zedilesi ye-IP okt Inombolo ye-Transmitter 3 inikwe idilesi ye-IP ye-169.254.3.3 kwaye iya kuba ne-ID ye-3. Ukulungisa i-ID yeyunithi ayikhuthazwa.
Ubungakanani beSistim - lungisa ubungakanani benkqubo ngeTransmitter nganye
I-HDMI Audio – khetha phakathi kwe: I-Auto, i-HDMI, okanye i-odiyo ye-analogue
Imowudi ye-HDCP - khetha phakathi kwe:HDCP Bypass, Force 2.2, okanye Force 1.4
I-CEC Pass-through (On / Off) - ivumela i-CEC (i-Consumer Electronic Command) ukuba ithunyelwe nge-Multicast system ukuya kunye nesixhobo somthombo esixhunywe kwi-Transmitter. Nceda uqaphele: I-CEC mayivulwe kwiyunithi yoMamkeli kwakhona ukuze imiyalelo ye-CEC ithunyelwe phakathi kwayo. Useto oluhlala lukhona lwalo mboniso IVIMILE.
Umboniso wePaneli yangaphambili (Vula / Cima) - yenza / vala umboniso ophambi kweTransmitter. Umboniso wepaneli yangaphambili yeyunithi ye-Multicast iya kucinywa ngokuzenzekelayo emva kwemizuzwana engama-90, kwaye icime. Cinezela naliphi na iqhosha elingaphambili kwi-Transmitter ukuvusa idispleyi xa icinyiwe.
Iphaneli yangaphambili yamandla okukhanya kwe-LED (Ivuliwe / ivaliwe / kwimizuzwana engama-90) - iya kudanyaza amandla e-LED kwiphaneli yangaphambili yeTransmitter ukunceda ukuchonga imveliso elandela ulungelelwaniso lwe-auto. Okukhethwa kukho: khanyisa isibane samandla ngokuqhubekayo, okanye ukhanyise i-LED imizuzwana engama-90 ngaphambi kokuba i-LED ibuyele ekukhanyeni ngokusisigxina. Nceda uqaphele: iphaneli yangaphambili ii-LED ziya kuzicima ngokuzenzekelayo emva kwemizuzwana engama-90 kunye nomboniso wephaneli yangaphambili. Cinezela elinye lamaqhosha e-CH ukuvusa iyunithi.
Khuphela i-EDID – jonga kwiphepha elilandelayo ukuze ufumane ulwazi oluthe kratya malunga 'Kopisha i-EDID'.
Iisetingi zothotho – vula uthotho 'Imo yoNdwendwe' kwaye usete useto lothotho lwezibuko lwesixhobo (okt Rate Baud, Parity etc).
Phambiliview -Ibonisa iwindow ephumayo enesikrini esibambayo sesixhobo somthombo esiqhagamshelwe kwiTransmitter.
Qalisa kwakhona-iqalisa kwakhona iTransmitter.
Faka enye endaweni - esetyenziselwa ukubuyisela i-Transmitter ngaphandle kweintanethi. Nceda uqaphele: I-Transmitter eza kutshintshwa kufuneka ingasebenzi kwi-intanethi ukuze olu phawu lusetyenziswe, kwaye i-Transmitter entsha kufuneka ibe yiyunithi engagqibekanga yasefektri enedilesi ye-IP engagqibekanga: 169.254.100.254.
Susa kwiProjekthi - isusa isixhobo soThutho kwiprojekthi yangoku.
Ukusetwa kwakhona kweFactory - ibuyisela iTransmitter kwiseto sayo sokuqala esingagqibekanga kwaye usete idilesi ye-IP ku: 169.254.100.254.

Web-GUI – Transmitters – Actions – Khuphela EDID
I-EDID (iDatha eyongezelelweyo yokuBonisa i-Display) yisakhiwo sedatha esisetyenziswa phakathi kwesiboniso kunye nomthombo. Le datha isetyenziswa ngumthombo ukufumanisa ukuba zeziphi izisombululo zeaudio kunye nevidiyo ezixhaswa ngumboniso emva koko kolu lwazi umthombo uya kufumanisa ukuba zeziphi ezona zisombululo zomsindo kunye nevidiyo ezifuna ukukhutshwa.
Ngelixa injongo ye-EDID kukwenza ukudibanisa umboniso wedijithali kumthombo inkqubo elula yeplagi kunye nokudlala, imiba inokuvela xa imiboniso emininzi, okanye ukutshintshwa kwe-matrix yevidiyo kuqaliswa ngenxa yokunyuka kwenani lezinto eziguquguqukayo.
Ngokumisela kwangaphambili isisombululo sevidiyo kunye nefomathi yeaudio yomthombo kunye nesixhobo sokubonisa unokunciphisa ixesha le-EDID yokuxhawula ngesandla ngaloo ndlela wenze ukutshintsha ngokukhawuleza kwaye kuthembeke ngakumbi.
Umsebenzi we-Copy EDID uvumela i-EDID yesiboniso ukuba ibanjwe kwaye igcinwe ngaphakathi kwenkqubo ye-Multicast. Ukucwangciswa kwe-EDID kwesikrini kunokukhunjulwa ngaphakathi kokukhethwa kwe-EDID yeTransmitter. Iziboniso ze-EDID zinokufakwa kuso nasiphi na isixhobo somthombo esingavezi ngokuchanekileyo kwisikrini esibuzwayo.
Kuyacetyiswa ukuba kuqinisekiswe ukuba imidiya evela kwiTransmitter ene-EDID yesiko ibonisa ngokuchanekileyo kwezinye iziboniso ngaphakathi kwenkqubo.
Nceda uqaphele: kubalulekile ukuba isikrini esinye kuphela viewing Transmitter ngexesha Ikopi ye-EDID yenzeka.

Web-GUI – Abamkeli

Ifestile yesishwankathelo soMamkeli ibonisa ngaphezuluview kuzo zonke izixhobo zoMfumani eziye zamiselwa ngaphakathi kwisistim, ekwaziyo ukuhlaziya inkqubo njengoko kufuneka.

Iimpawu zephepha lesishwankathelo soMamkeli zibandakanya:

1. I-ID - inombolo ye-ID (imveliso) isetyenziselwa ukulawula inkqubo ye-Multicast xa usebenzisa iiplatifomu zokulawula umntu wesithathu.
2. Igama – igama labaFumana (ngokuqhelekileyo isixhobo esincanyathiselwe kwi-Receiver) banikwa ngokuzenzekelayo amagama angagqibekanga okt iReceiver 001 njl
3. Idilesi ye-IP - idilesi ye-IP eyabelwe uMmkeli ngexesha lokucwangciswa.
4. Idilesi ye-MAC - ibonisa idilesi ye-MAC yoMfumani (i-LAN 1 port).
5. I-Dante MAC - ibonisa idilesi ye-MAC ye-port ye-LAN2 apho uqhagamshelwano oluzimeleyo lweDante lusetyenziswa. Nceda ubone iqhosha eliphawulwe Uncedo lweNdlela ye-LAN2 ngengcaciso eyongezelelekileyo ngokwahlula iinethiwekhi zeVidiyo kunye neDante.
6. Imveliso - ichonga imveliso esetyenziswayo eqhagamshelwe kwinkqubo.
7. I-Firmware - ibonisa inguqulo ye-firmware elayishwe ngoku kwi-Receiver. Ngolwazi oluthe kratya malunga nokuhlaziya i-firmware, nceda ubone icandelo elithi 'Hlaziya iFirmware'.
8. Imo-ibonisa ubume be-Intanethi / ngaphandle kwe-intanethi kuMamkeli ngamnye. Ukuba imveliso inokuthi 'Ayisebenzi kwi-intanethi', jonga uqhagamshelo lweyunithi kwisitshixo sothungelwano.
9. Umthombo - ubonisa umthombo wangoku okhethiweyo kumamkeli ngamnye. Ukutshintsha ukhetho lomthombo, khetha i-Transmitter entsha kukhetho lokuhla.
10. I-Scaler Resolution - lungisa isisombululo sesiphumo usebenzisa i-scaler eyakhelweyo kwividiyo ngaphakathi kwi-Multicast Receiver. I-scaler iyakwazi ukunyusa kunye nokuthoba isignali yevidiyo engenayo. Uncedo olusisiseko lunokufumaneka ekukhetheni isikali ngokunqakraza iqhosha phezulu kwiphepha eliphawulwe 'Uncedo lokuKhalisela'. Izisombululo ezifumanekayo ezinezikali ze-IP50HD, IP2xxUHD, kunye ne-IP3xxUHD iinkqubo zonke zahlukile.
11. I-HDR ivuliwe / ivaliwe - ivula i-HDR (i-High Dynamic Range) ukuhambelana - sebenzisa kuphela izikrini ezixhasa i-HDR.
12. Umsebenzi - uchonga uMmkeli njengemveliso ezimeleyo (iMatrix) okanye njengenxalenye yoDonga lweVidiyo. Olu khetho lube ngwevu xa uMamkeli engeyonxalenye yoluhlu lweWall yeVidiyo.
13. Imodi ye-LAN2: apho i-IP250UHD okanye i-IP350UHD isetyenziswa khona, kunokwenzeka ukwahlula i-audio ye-Dante yokudibanisa kwinethiwekhi ye-Dante eyahlukileyo ukusuka apha. Apho IP200UHD okanye IP300UHD zisetyenziswayo (akukho uxhumano lweDante), olu khetho alukhethi. Jonga itafile yangaphambili (iphepha le-TX) lokukhethwa kwe-LAN (ayifumaneki kwi-ACM firmware ye-IP50HD) .
14. Iintshukumo - jonga kwiphepha elilandelayo ukuze ufumane ulwahlulo lwezenzo ezongezelelweyo.
15. Uncedo Lokukala – ungafumana uncedo olusisiseko ngokukhetha ngokucofa iqhosha elingasentla kwephepha eliphawulwe 'Uncedo Lokukala'.
16. Hlaziya - cofa apha ukuze uhlaziye zonke iinkcukacha zangoku kwizixhobo ezingaphakathi kwinkqubo.

Web-GUI – Abamkeli – iintshukumo

Iqhosha elithi 'Iintshukumo' livumela iifitsha eziphambili zoMmkeli ukuba zifikelelwe kwaye ziqwalaselwe.
Igama - linokulungiswa ngokufaka igama kwibhokisi yombhalo yefomu yasimahla.
Nceda uqaphele: oku kukhawulelwe kwiimpawu ezili-16 ubude, kwaye ezinye iimpawu ezikhethekileyo zisenokungaxhaswa.
I-ID yohlaziyo - i-ID ayigqibekanga ukuya kumanani ama-3 okugqibela edilesi ye-IP yesixhobo oko kukuthi uMmkeli 3 unikwe idilesi ye-IP ye-169.254.6.3. I-ID yohlaziyo ivumela i-ID / IP yeyunithi ukuba ilungiswe.
Ubungakanani beSistim - lungisa ubungakanani benkqubo ngoMamkeli ngamnye.
Imowudi ye-HDCP - khetha phakathi kwe:HDCP Bypass, Force 2.2, okanye Force 1.4.
Imo ye-ARC-nceda ubone ingcaciso ye-ARC kwiphepha elilandelayo.
Ukutshintsha ngokukhawuleza - tshintsha ividiyo kuqala, kunye neaudio, IR, RS-232, USB / KVM yonke itshintshe emva. Nceda uqaphele: ngeli lixa umboniso wevidiyo unokutshintsha ngokukhawuleza, ezinye iindawo zefidi (oko kukuthi i-audio, i-IR njl njl) ziyakuthatha ixesha elide ukubamba.
I-CEC Pass-through (ON / OFF) - ivumela i-CEC (uMthengi we-Electronic Command) ukuba ithunyelwe nge-Multicast system. Nceda uqaphele: I-CEC nayo kufuneka yenziwe ukuba isebenze kwiTransmitter.
IsiPhumo seVidiyo (VULIWE / CIMILE) – ivula / CIMA imveliso yevidiyo ye-HDMI – ifuna ukuxhawulana ngesandla okutsha xa ubuyela umva.
Ividiyo yeThulisa (ON / OFF) - ithulisa imveliso ye-HDMI (yenza isikrini esimnyama), igcine i-HDMI i-handshake.
Ukumisa iVidiyo (ON / OFF) - misa i-HDMI ividiyo kunye ne-audio edibeneyo kwisakhelo xa umyalelo ukhutshiwe. Ukucima kuthatha i-HDMI feed ukusuka kwindawo xa umyalelo ukhutshiwe.
Ividiyo eSebenzayo ivuliwe (IVULIWE / YIVAMILE) – icima imveliso yevidiyo xa kungekho midiya esasazwayo. Imveliso iya kuphinda ivuleke xa imidiya iqaliswa.
Amaqhosha ePhaneli ePhambili (ON / OFF) - amaqhosha eSitishi angaphambili kwi-Receiver nganye anokukhubazeka ukuyeka ukutshintsha okungafunekiyo.
Iphaneli yangaphambili IR (KUVULIWE / KUVALIWE) – yenza okanye yenze ingasebenzi uMamkeli ekwamkeleni imiyalelo ye-IR.
KwiSazisi seMveliso yeSkrini (Vuliwe / Valiwe / Kwimizuzwana engama-90) - Vula / Vala i-ID yeMveliso yeSkrini. Ukutshintshela kwiSazisi seMveliso yeSkrini ivuliwe ibonisa i-ID (okt i-ID 001) yoMamkeli ebekwe phezu komboniso oqhagamshelweyo.
Iphaneli yangaphambili yamandla okukhanya kwe-LED (Ivuliwe / ivaliwe / kwimizuzwana engama-90) - iya kukhanyisa amandla e-LED kwiphaneli yangaphambili ye-Receiver ukunceda ukuchonga isixhobo.
Umboniso wePaneli yangaphambili (Kuvuliwe / Imizuzwana engama-90) - sebenzisa oku ukwenza / ukuvala umboniso ophambi koMamkeli. Ukuboniswa kwesixhobo kuya kucinywa emva kwemizuzwana engama-90 de sivuswe.
Ukujikeleza - jikelisa umfanekiso nge: 0, 90, 180 kunye ne-270 degrees.
Yolula – yenza ubungakanani kwakhona bomfanekiso ukuze 'Ukolule' ukuya kwindawo yesibonisi, okanye 'Maintain Aspect Ratio' yesiphumo sesixhobo somthombo.
Izicwangciso zothotho / Phambiview / Qalisa kwakhona / Faka endaweni / Susa kwiProjekthi / Ukuseta kwakhona kweFactory - useto olufana noluchazwe kwiphepha loThumelo ngaphambili.

Web-GUI – Umzila weMiqondiso eZinzileyo

I-ACM iyakwazi ukuqhubela phambili ngokuzimeleyo kwezi zibonakaliso zilandelayo ngenkqubo ye-Multicast:

• Ividiyo
• Umsindo (nceda uqaphele: indlela yomsindo ezimeleyo ayifumaneki kwi-thje IP50HD series. I-ARC ifumaneka kuphela kwiinkqubo ze-IP300UHD kunye ne-IP350UHD)
• I-infrared (IR)
• RS-232
• USB / KVM
• I-CEC (Umyalelo woMthengi we-Electronic) - ivaliwe ngokungagqibekanga. Ukuvula, nceda wenze njalo kwi-TX / RXAction thebhu kwiyunithi nganye

Oku kuvumela umqondiso ngamnye ukuba ulungiswe ukusuka kwimveliso ye-Multicast ukuya kwenye kwaye ungachaphazeleki ngokutshintsha kwevidiyo eqhelekileyo. Oku kunokuba luncedo kwi-IR, i-CEC okanye i-RS-232 yolawulo lweemveliso kwintsimi usebenzisa inkqubo ye-Multicast yokwandisa imiyalelo yokulawula ukusuka kwisisombululo solawulo lweqela lesithathu, okanye abavelisi be-IR yokulawula kude.
Nceda uqaphele: ngaphandle kwe-IR kunye ne-RS-232, umzila unokulungiswa kuphela ukusuka kwi-Receiver ukuya kwi-Transmitter product. Nangona umzila unokusetwa ngendlela enye kuphela, unxibelelwano lunamacala amabini phakathi kweemveliso ezimbini.

Ngokungagqibekanga, umzila we: Ividiyo, iAudio, i-IR, iSeri, i-USB kunye ne-CEC iya kulandela ngokuzenzekelayo i-Transmitter yokhetho lweyunithi yoMfumani.
Ukukhetha indlela emiselweyo, sebenzisa ibhokisi eyehlayo kumqondiso ngamnye/abamkeli ukulungisa indlela.
Emva kokuba i-ACM yongezwe kwisistim ye-Multicast, i-IR yokuguqula amandla okulawula (kungekhona i-IR pass-through) kunye namaqhosha epaneli yangaphambili ye-Multicast Receivers inikwe amandla ngokungagqibekanga. Oku kuvaliwe kwi-Actions function equlethwe ngaphakathi kwephepha lesishwankathelo soMamkeli (jonga kwiphepha elidlulileyo).
Indlela isenokucocwa ngokukhetha 'Landela' kuyo nayiphi na indawo ukusuka web-GUI. Ulwazi oluthe vetshe kuNdlela oLungisiweyo lunokufunyanwa ngokucofa u-'Fixed Routing Help'.
Ukufumana imiyalelo ephezulu yomzila yeVidiyo, iAudio, IR, RS-232, USB kunye neCEC xa usebenzisa inkqubo yolawulo lweqela lesithathu, nceda ubhekisele kuXwebhu lwe-API olwahlukileyo (olukhoyo ukukhuphela kwi-Blustream webindawo).

I-Audio eLungisiweyo eNyuliweyo
I-ACM ivumela ukuba inxalenye yomsindo we-HDMI isignali ihanjiswe ngokuzimeleyo kuyo yonke inkqubo ye-Blustream Multicast. Ngaphantsi kokusebenza okuqhelekileyo i-audio edibeneyo ngaphakathi kwe-HDMI isignali iya kusasazwa kunye nomqondiso wevidiyo ohambelanayo ukusuka kwi-Transmitter ukuya kwi-Receiver/s.
Amandla okuhanjiswa kweaudio esisigxina ye-ACM ivumela ukuba ingoma yomsindo isuka komnye umthombo ifakwe komnye umjelo wevidiyo weTransmitters.

I-IR eZinzileyo
Isici esisisigxina somzila we-IR sivumela ikhonkco ye-IR esisigxina ye-bi-directional phakathi kwe-2x yeemveliso ze-Multicast. Umqondiso we-IR uhanjiswa kuphela phakathi kwe-RX emiselweyo ukuya kwi-TX, okanye i-TX ukuya kwiimveliso ze-TX. Oku kunokuba luncedo ekuthumeleni i-IR kwisisombululo solawulo somntu wesithathu (ELAN, Control4, RTi, Savant njl) kunye nokusebenzisa inkqubo ye-Blustream Multicast njengendlela yokwandisa i-IR kumboniso okanye enye imveliso kwinkqubo. Ikhonkco le-IR li-bi-directional ngoko ke linokuthunyelwa emva kwelinye icala ngaxeshanye.

Uqhagamshelo:
Iprosesa yolawulo lwesithathu i-IR, okanye i-Blustream IR receiver, iqhagamshelwe kwi-IR RX socket kwi-Multicast Transmitter okanye i-Receiver.
Nceda qaphela: Kufuneka usebenzise iBlustream 5V IRR Receiver okanye iBlustream IRCAB (3.5mm stereo ukuya mono 12V ukuya 5V IR converter cable). Iimveliso ze-Blustream ze-Infrared zonke ziyi-5V kwaye AKUKHO ukuhambelana nabanye abavelisi izisombululo ze-infrared.

I-Blustream 5V IRE1 Emitter iqhagamshelwe kwisokethi ye-IR OUT kwi-Multicast Transmitter okanye iReceiver.
I-Blustream IRE1 kunye ne-IRE2 Emitters ziyilelwe ukulawula okucacileyo kwe-IR ye-hardware.
(IRE2 - I-Dual Emitter yamehlo ithengiswa ngokwahlukeneyo)

I-Fixed USB Routed / KVM
Isici esisisigxina somzila we-USB sivumela ikhonkco le-USB esisigxina phakathi kwe-Multicast Receiver/s kunye neTransmitter. Oku kunokuba luncedo ekuthumeleni imiqondiso ye-KVM phakathi kwesikhundla sabasebenzisi kwiPC esembindini, iseva, iCCTV DVR / NVR njl.

Iimpawu ze-USB:

Ukucaciswa kwe-USB	I-USB2.0 (nceda uqaphele: ayixhasi i-USB2.0 epheleleyo yokudluliselwa kwedatha)
Ulwandiso	Ngaphezulu kwe-IP, iteknoloji yokuqondisa kwakhona iHybrid
Umgama	100m
Umgama Ext.	ngokusebenzisa ihabhu yokutshintsha kwe-Ethernet
Izixhobo eziphezulu ezisezantsi	5
I-Topology	1 ukuya 1 1 ukuya kwabaninzi ngokukodwa (USBoIP) 1 ukuya kwabaninzi ngaxeshanye kodwa inani eliqingqiweyo lezixhobo ze-USB (USBoIP)* 1 ukuya kwabaninzi ngaxeshanye ikhibhodi / iMouse (K/MoIP)
USB R/W Ukusebenza *	R: 69.6 Mbps W: 62.4 Mbps

* I-Benchmark Reference: Funda / Bhala i-USB kwi-SATA HD ngaphandle kwenkqubo ye-Multicast R: 161.6 Mbps / W: 161.6 Mbps

I-CEC eZinzileyo
I-CEC okanye i-Consumer Electronic Command yi-HDMI iprotocol yokulawula edibeneyo evumela ukuba imiyalelo ithunyelwe ukusuka kwisixhobo esinye se-HDMI ukuya kwesinye ngezenzo ezilula ezifana nalezi: Amandla, uMqulu njl.
Inkqubo ye-Blustream Multicast ivumela isiteshi se-CEC ngaphakathi kwekhonkco ye-HDMI phakathi kweemveliso ezimbini (umthombo kunye ne-sink) ukunxibelelana nomnye usebenzisa i-protocol ye-CEC.
I-CEC kufuneka yenziwe (oku kubizwa ngamanye amaxesha 'njengoLawulo lwe-HDMI') kuzo zombini isixhobo somthombo kunye nesixhobo sokubonisa ukuze inkqubo ye-Multicast inxibelelane nemiyalelo ye-CEC ngekhonkco leMulticast.
Nceda uqaphele: inkqubo ye-Blustream Multicast iya kuthutha kuphela i-protocol ye-CEC ngokucacileyo. Kuyacetyiswa ukuba kuqinisekiswe ukuba umthombo kunye nezixhobo ze-sink ziya kunxibelelana ngokufanelekileyo ngaphambi kokuzibophelela kolu hlobo lolawulo nge-Multicast. Ukuba kukho umba ojongene nonxibelelwano lwe-CEC phakathi komthombo kunye nokucwila ngokuthe ngqo, oku kuya kuboniswa xa kuthunyelwa nge-Multicast system.

I-ARC kunye ne-Optical Audio Return (IP300UHD & IP350UHD kuphela)
Iimveliso ze-IP300UHD kunye ne-IP350UHD zinamandla okuthatha nokuba yi-HDMI ARC, i-HDMI eARC, okanye i-Optical audio connectivity evela kwisiboniso esiqhagamshelwe kwi-Receiver, kwaye isasaze oku kubuyela kwi-Optical output kwiyunithi yeTransmitter ebekwe kude kwinkqubo. Nceda uqaphele, eli nqaku alikho kuyo nayiphi na enye imveliso ye-Multicst kwaye lilinganiselwe kumsindo we-5.1ch max.
Ukuhanjiswa kwenqaku le-Audio Return ilawulwa ukusuka ezantsi kwi-Fixed Routing tab ye-ACM210 interface:

I-ARC icinyiwe ngokungagqibekanga. Ukwenza i-ARC isebenze yinyathelo eli-2:

1. Khetha indlela usebenzisa i-drop-down box ukudibanisa i-Transmitter kwi-Receiver
2. Yiya kwi-ACM Receiver tab, cofa kwiqhosha le-Action le-RX edityaniswe kwi-Transmitter. Khetha ukuba yeyiphi na indlela yesandi esetyenziswayo kuhla-phantsi oluphawulwe “Imo ye-ARC” (nceda uqaphele: i-CEC mayivulelwe i-HDMI ARC):

Web-GUI – Uqwalaselo Wall Video

I-Blustream i-Multicast Receivers inokuqwalaselwa ukuba ibe yinxalenye ye-Video Wall array ngaphakathi kwe-ACM. Nayiphi na inkqubo yeMulticast inokuqulatha ukuya kuthi ga kwi-9x yeeWall zeVidiyo zoluhlu lweemilo kunye nobukhulu obahlukeneyo. Ukusuka kwi-1 × 2 ukuya kwi-9 × 9.

Ukumisela uluhlu olutsha lweVidiyo yoDonga, yiya kwiMenu yoBumbeko lweWall yeVidiyo kwaye ucofe iqhosha elibhalwe 'Udonga lweVidiyo entsha' njengoko iphawulwe phezulu kwesikrini. Uncedo ngokwenza uluhlu lweWall yeVidiyo lunokufunyanwa ngokucofa iqhosha eliphawulwe 'Uncedo lweWall yeVidiyo'.
Nceda uqaphele: ii-Multicast Receivers eziza kusetyenziselwa i-Video Wall kufuneka ziqwalaselwe njengabamkeli ngabanye ngaphambi kokuba badlulele kule ndawo. Kukuziqhelanisa kakuhle ukuba sele ubize ii-Multicast Receivers ukuze kube lula uqwalaselo okt "Udonga lweVidiyo 1 - Phezulu eKhohlo".

Ngenisa ulwazi olufanelekileyo kwifestile ye-pop-up ukuze unike igama kwaye ukhethe inani leephaneli ngokuthe tye nangokuthe nkqo ngaphakathi kodonga lweVidiyo. Nje ukuba ulwazi oluchanekileyo lufakwe kwisikrini, khetha 'Yenza' ukwenza itemplate yodonga lweVidiyo ngaphakathi kweACM.

Iphepha lemenyu kuluhlu olutsha lweVideos Wall lunolu khetho lulandelayo:

1. Emuva – ibuyela kwiphepha elidlulileyo ngokwenza uDonga olutsha lweVidiyo.
2. Hlaziya igama - lungisa igama elinikwe uluhlu lweWall yeVidiyo.
3. Useto lweSkrini-uhlengahlengiso lwe-bezel / imbuyekezo yesikhewu kwizikrini ezisetyenziswayo. Jonga iphepha elilandelayo ngeenkcukacha ezithe kratya kwiisetingi zeBezel.
4. IsiQinisekiso seQela - kukho iinketho zokukwazi ukwenza ulungelelwaniso oluninzi (okanye 'ukusetha kwangaphambili') kuluhlu ngalunye lweWall yeVidiyo ngaphakathi kwenkqubo yeMulticast. Ukwahlulahlula / ukusetwa kwangaphambili kuvumela uDonga lweVidiyo ukuba lumiselwe ngeendlela ezininzi, oko kukuthi, ukubeka ngokwamaqela amanani esikrini kunye ukwenza iindonga ezinobungakanani obahlukeneyo ngaphakathi koluhlu olunye.
5. Guqula i-OSD – Vula / Vala i-OSD (kwiSiboniso seSkrini). Ukuguqula i-OSD On kuya kubonisa inombolo ye-ID (okt ID 001) ye-Multicast Receiver kwisiboniso ngasinye esiqhagamshelwe kwi-Receiver njengokwaleka kumajelo osasazo asasazwayo. Ukucima i-OSD kususa i-OSD. Oku kuvumela ukuchongwa lula kweziboniso ngaphakathi koDonga lweVidiyo ngexesha loqwalaselo kunye nokuseta.

Umboniso / umamkeli wabela:
I-ACM iya kudala ukubonakaliswa okubonakalayo koDonga lweVidiyo kwiphepha. Sebenzisa amatolo okuhla esikrinini ngasinye ukukhetha imveliso efanelekileyo ye-Multicast Receiver eqhagamshelwe kwiscreen ngasinye kudonga lweVidiyo.

Web-GUI – Uqwalaselo lweWall yeVidiyo – Useto lweBezel
Eli phepha livumela imbuyekezo yobungakanani bebhezel nganye yesikrini ngaphakathi koDonga lweVidiyo, okanye ngenye indlela kuyo nayiphi na izithuba phakathi kwezikrini. Ngokungagqibekanga, inkqubo yeMulticast iya kufaka i-bezels yeVidiyo Wall izikrini "phakathi" komfanekiso uwonke (ukwahlula umfanekiso). Oku kuya kuthetha ukuba ii-bezels zezikrini azihlali "ngaphaya" kuyo nayiphi na indawo yomfanekiso. Ngokuhlengahlengisa Ububanzi Bangaphandle (OW) vs View Ububanzi (VW), kunye noBubude obungaPhandle (OH) vs View Ubude (VH), iibezel zesikrini zinokuhlengahlengiswa ukuze zihlale “phezulu” kumfanekiso oboniswayo.

Zonke iiyunithi ziyi-1,000 ngokungagqibekanga - eli linani elingenasizathu. Kunconywa ukusebenzisa imilinganiselo yezikrini ezisetyenziswa kwi-mm. Ukubuyekeza ubukhulu be-bezel kwizikrini ezisetyenziswayo, nciphisa View Ububanzi kunye View Ubude ngokufanelekileyo ukuhlawula ubungakanani bee-bezels. Nje ukuba iziphumo zolungiso olufunekayo zifunyenwe, iqhosha elithi 'Khuphela iiBezels kuBonke' lingasetyenziselwa ukukopa useto kumboniso ngamnye. Cofa u-'Hlaziya' ukuze uqinisekise useto kwaye ubuyele kwiscreen sangaphambili soHlaziyo lweVidiyo yaseWall.
Iqhosha 'loNcedo lwe-Bezel' livula ifestile ephumayo enesikhokelo kulungiso kunye nohlengahlengiso kwezi setingi.

Web-GUI – Uqwalaselo loDonga lweVidiyo – IsiQinisekiso seQela
Nje ukuba uluhlu lweWall lweVidiyo lwenziwe, lunokuqwalaselwa kwiinketho ezahlukeneyo zokubonisa. I-Video Wall Configurator ivumela ukusetwa kwangaphambili ukuba kuyilwe ukubeka iWall yevidiyo ukulungisa amaqela ahlukeneyo emifanekiso kulo lonke uluhlu. Cofa iqhosha 'loMququzeleli weQela' kwi-Update Video Wall screen.

Ukhetho kule menu ngolu hlobo lulandelayo:

1. Emuva-uzulazula ubuyela umva kwiphepha loHlaziyo lweWall yeVidiyo ngaphandle kokwenza naluphi na utshintsho kuseto.
2. Uqwalaselo Lweethontsi-hamba phakathi kolungelelwaniso olwahlukeneyo / useto lwangaphambili olusetwe ngaphambili luluhlu lweWall yeVidiyo. Ngokungagqibekanga, 'Uqwalaselo 1' luza kufakelwe uDonga lweVidiyo luyilwa kwaye luqwalaselwe okokuqala.
3. Hlaziya igama – seta igama lolungelelwaniso / lokusetwa kwangaphambili, oko kukuthi, 'Izikrini esinye' okanye 'uDonga lweVidiyo'. Ngokungagqibekanga, uqwalaselo / amagama asetwe kwangaphambili azakusetwa njenge 'Uqwalaselo 1, 2, 3…' de itshintshe.
4. Yongeza ulungelelwaniso-yongeza uqwalaselo olutsha / useto lwangaphambili lweWall yeVidiyo ekhethiweyo.
5. Cima – susa ulungelelwaniso olukhethiweyo lwangoku.

Ukwabela Iqela:
Ukwahlulahlula kuvumela uDonga lweVidiyo ukuba lumiselwe ngeendlela ezininzi, oko kukuthi, ukwenza iindonga zevidiyo ezinobungakanani obahlukeneyo ngaphakathi kodonga olukhulu lweVidiyo. Sebenzisa ukhetho lokuhla kwiscreen ngasinye ukwenza iQela ngaphakathi koDonga lweVidiyo:

Jonga kwiphepha elilandelayo ngengcaciso eyongezelelekileyo malunga nokuba udonga olukhulu lwevidiyo lunokuba namaQela amaninzi aqwalaselwe ngaphakathi.
Web-GUI – Uqwalaselo loDonga lweVidiyo – IsiQinisekiso seQela
UmzekeloampLe: i-3 × 3 yodonga lweVidiyo luluhlu lunokuba noqwalaselo oluninzi / useto lwangaphambili:

1. Ukubonisa i-9x yemithombo yeendaba ezahlukeneyo zemithombo yeendaba - ukuze zonke izikrini zisebenze ngokuzimeleyo kunye nesikrini ngasinye esibonisa umthombo omnye - ungadityaniswanga (shiya zonke izinto ezihlayo 'njengenye').
2. Njengodonga lweVidiyo ye-3 × 3 - ebonisa umthombo omnye wemithombo yeendaba kuzo zonke izikrini ze-9 (zonke izikrini kufuneka zikhethwe njenge 'Iqela A').
3. Ngokubonisa umfanekiso we-2 × 2 wodonga lweVidiyo ngaphakathi kwe-3 × 3 yodonga lwevidiyo ngokubanzi. Oku kunokuba 4x iinketho ezahlukeneyo:
   – Nge 2×2 phezulu ekhohlo 3×3, kunye 5x ngamnye izikrini ukuya ekunene nasezantsi (khetha 2×2 phezulu ekhohlo njenge Iqela A kunye nezinye izikrini iseti 'Single') - bona ex.ample ngezantsi...
   – Nge-2 × 2 kwicala eliphezulu lasekunene le-3 × 3, enezikrini ezi-5x ekhohlo nasezantsi (khetha i-2 × 2 ekunene phezulu njengeQela A nezinye izikrini ezisetwe njenge ‘Single’).
   – Nge-2×2 emazantsi ekhohlo kwi-3×3, enezikrini ezi-5x ekunene nangaphezulu (khetha i-2×2 emazantsi ekhohlo njengeQela A kunye nezinye izikrini ezisetwe njenge-'Single').
   – Nge-2 × 2 emazantsi ekunene kwi-3×3, enezikrini ezi-5x ekhohlo naphezulu (khetha i-2×2 ezantsi ekunene njengeQela A kunye nezinye izikrini ezisetwe njenge-'Single').

Nale ex ingentlaampNgokukodwa, kuya kubakho imfuneko yokuyila ulungelelwaniso olu-6 olwahlukileyo lweWall yeVidiyo uluhlu, ukwaba izikrini ezidityanisiweyo kwiQela kusetyenziswa ukuhla okukhethiweyo. Ulungelelwaniso / Amaqela anokuthiywa ngokutsha njengoko kufunwa kusetyenziswa 'Hlaziya igama' ukhetho kwikhusi yoBumbeko lweQela.
Ulungelelwaniso olongezelelweyo lunokwenziwa kunye nezikrini ezabelwe njengamaqela. Oku kuvumela imithombo emininzi yevidiyo ukuba ibe viewed kwangaxeshanye kwaye iya kuvela njengoDonga lweVidiyo ngaphakathi koDonga lweVidiyo. Le ingezantsi example ineendonga ezimbini zeVidiyo ezinobungakanani obuhlukeneyo ngaphakathi kwe-3 × 3 uluhlu. Olu lungelelwaniso luqulathe amaqela ama-2:

Web-GUI – Uqwalaselo Wall Video
Nje ukuba udonga lweVidiyo lwenziwe, luthiweywe ngokufanelekileyo, kwaye amaqela / ukusetha kwangaphambili kwabelwe, iWall yeVidiyo emiselweyo viewIbhalwe kwiphepha eliphambili loLungiselelo lweWall yeVidiyo:

Ulungelelwaniso / ulungelelwaniso oluyilwe ngaphakathi kwesixokelelwano ngoku luzakuvela ngaphakathi kwe Amaqela odonga lweVidiyo iphepha. Iphepha loqwalaselo lodonga lwevidiyo livumela ukuba iqela litshintshwe.
Iqhosha 'Hlaziya' libuyisela iphepha langoku kunye noqwalaselo loluhlu lweVidiyo Wall oluboniswayo ngoku.
Oku kuluncedo ngakumbi xa uvavanya imiyalelo yoqwalaselo yodonga lweVidiyo ukusuka kwinkqubo yolawulo yomntu wesithathu.
Nceda ubone imiyalelo ephambili ye-API ukuze isetyenziswe kunye neenkqubo zolawulo lomntu wesithathu zolawulo lweWall yevidiyo, ukutshintshwa koqwalaselo kunye nokhetho lweQela olukhoyo ukukhutshelwa kwiBlustream webindawo.

Web-GUI – Abasebenzisi

I-ACM inamandla okuba Abasebenzisi ngabanye bangene kwi web-I-GUI yenkqubo ye-Multicast kunye nokufikelela kwiindawo zomntu ngamnye / imimandla yenkqubo, ukulawula ngokupheleleyo yonke inkqubo ye-Multicast, okanye ukulawula okulula ukuba yeyiphi indawo ejongwayo kwiindawo ezikhethiweyo kuphela. Ngoncedo lokuseta Abasebenzisi abatsha, cofa kwiqhosha elibhalwe 'Us Help Help'.
Ukuseta uMsebenzisi omtsha, cofa u-'Umsebenzisi omtsha' phezulu kwesikrini:

Ngenisa iinkcukacha ezintsha zoMsebenzisi kwifestile evelayo kwaye ucofe u-'Yenza' xa sele ugqibile:

Umsebenzisi omtsha uya kuthi emva koko avele kwiphepha lemenyu yabasebenzisi elungele ukufikelela / iimvumelwano eziza kuqwalaselwa:

Ukukhetha iimvume zoMsebenzisi ngamnye, ukuhlaziya igama eligqithisiweyo loMsebenzisi, okanye ukususa uMsebenzisi kwisistim ye-Multicast, cofa iqhosha elithi 'Izenzo'.

Ukhetho lweeMvume lunika ufikelelo ekukhetheni ukuba ngabaphi abaThuthi okanye abaFumana uMsebenzisi abanokubona ngaphakathi kwamaphepha abo olawulo (ukutsalwa nokulahla uLawulo, kunye noLawulo loDonga lweVidiyo). Ngazo zonke iibhokisi ezikhangelwe ecaleni kweTransmitter nganye okanye iReceiver, uMsebenzisi angangaphambiliview kwaye utshintshe kuyo yonke inkqubo. Ukuba uMsebenzisi unokukwazi ukulawula isikrini esinye / umamkeli, emva koko sukukhangela bonke abanye abaFumana. Ngokunjalo, ukuba uMsebenzisi akazukunikwa ukufikelela kwisixhobo esinye (okanye ngaphezulu) somthombo, ezi ziThuthi kufuneka zingajongwa.
Apho kukho uluhlu lweWall yeVidiyo kwinkqubo yeMulticast, uMsebenzisi uya kufuna ukufikelela KUBO BONKE abaFumana abanxulumeneyo ukuze bakwazi ukufumana ulawulo lokutshintsha koDonga lweVidiyo. Ukuba uMsebenzisi akakwazi ukufikelela kubo bonke abaFumana, uDonga lweVidiyo aluyi kuvela kwiphepha loLawulo lweVidiyo.

Nje ukuba iimvume zoMsebenzisi zikhethiwe, cofa u-'Hlaziya' ukuze usebenzise useto.
Nceda uqaphele: ukuze uyeke ukufikelela okungakhuselekanga kwi web i-interface (okt engenalo igama eliyimfihlo), i-akhawunti 'yeNdwendwe' mayicinywe emva kokuba umsebenzisi omtsha enofikelelo kwimithombo / kwizikrini ezisebenzayo ukusetwa. Ngale ndlela, nawuphi na uMsebenzisi wenkqubo uyafuneka ukuba afake igama lokugqitha ukuze afumane ulawulo lokutshintsha kwenkqubo.

Web-GUI – Useto

Iphepha lezicwangciso ze-ACM liza kubonelela ngokugqithisaview yeseto ngokubanzi, kunye nolawulo / useto lwenethiwekhi yevidiyo yeyunithi ekwaziyo ukulungisa nokuhlaziya iyunithi ngokufanelekileyo.

I-'Coca iProjekthi' isusa zonke ii-Transmitters, ii-Receivers, iindonga zevidiyo kunye nabasebenzisi abadalwe kwiprojekthi yangoku. file equlethwe kwi-ACM. Qinisekisa ngokukhetha u-'Ewe'.
Nceda qaphela: iWizard yokuSeta iProjekthi eNtsha iya kuvela emva kokusebenzisa umsebenzi othi 'Cima iProjekthi'. Ngaba iprojekthi kufuneka igcinwe file ayidalwanga phambi kokucoca iprojekthi, akunakwenzeka ukubuyisela inkqubo emva kweli nqaku.

Inketho ethi 'Seta kwakhona i-ACMxxx' ivumela oku kulandelayo:

1. Phinda umisele iNkqubo ukuya kumzi-mveliso (akubandakanyi useto lweNethiwekhi)
2. Phinda umisele iNethiwekhi kwimimiselo engagqibekanga (akubandakanyi useto lweNkqubo)
3. Seta kwakhona ZONKE iSistim kunye nesetingi zeNethiwekhi ubuyele kumzimveliso

Phantsi kweseto ngokubanzi, ukhetho 'Uhlaziyo' luvumela oku kulandelayo:

1. Vula / Vala ulawulo lwe-IR ukwenza / ukuvala igalelo le-IR ye-ACM ekwamkeleni imiyalelo ye-IR evela kwisisombululo solawulo lomntu wesithathu.
2. Hlaziya inombolo yezibuko yeTelnet apho izibuko loLawulo lwe-ACM linxibelelana ngayo. Inombolo yezibuko engagqibekanga esetyenzisiweyo yizibuko 23 eliza kusetyenziselwa bonke abaqhubi bolawulo beqela lesithathu beBlustream.
3. Hlaziya i-RS-232 Baud Rate ye-DB9 yoqhagamshelo lwe-ACM ukuze ihambelane neprosesa yolawulo lomntu wesithathu. Umlinganiselo weBaud omiselweyo osetyenziswayo ngu: 57600.

Iidilesi ze-IP zamachweba amabini e-RJ45 kwi-ACM inokuhlaziywa nge-IP, i-Subnet kunye needilesi zeSango. Sebenzisa iqhosha elithi 'Hlaziya' nokuba iNethiwekhi yoLawulo okanye iNethiwekhi yeVidiyo ukuhlaziya ulwazi lwamazibuko afunekayo. Isibuko soLawulo singasetwa kwi-DHCP ngokukhetha 'Vula':

OKUBALULEKILEYO: Ukulungisa idilesi ye-IP yeNethiwekhi yeVidiyo kwi-169.254.xx uluhlu luya kumisa unxibelelwano phakathi kwe-ACM kunye ne-Multicast Transmitters kunye nabaFundi abaye baqulunqwa kwangaphambili. Ngelixa i-ACM inokukhutshwa kuluhlu olucetyiswayo, iidilesi ze-IP zazo ZONKE ii-Transmitters kunye nabaFumana ziya kufuneka ukuba zihlonyelwe kuluhlu lwe-IP olufanayo ukuqinisekisa uqhagamshelwano kunye nolawulo lwenkqubo ye-Multicast. Ayikhuthazwa.

Web-GUI – Hlaziya iFirmware

Iphepha leFirmware yoHlaziyo livumela uhlaziyo lwe-firmware ye:

• Iyunithi yeACM
• Iiyunithi zeMulticast Transmitter kunye neReceiver

Nceda qaphela: iiphakheji ze-firmware ze-ACM, i-Multicast Transmitter kunye ne-Receiver yeemveliso zomntu ngamnye. Kuyacetyiswa ukuba uhlaziyo lwe-firmware lugqitywe kuphela kwi-desktop okanye i-laptop yePC efakwe kwi-intanethi.
Ukuhlaziya i-ACM:
Khuphela i-ACMxxx Firmware file (.bin/.img) ukusuka kwi-Blustream webindawo kwikhompyuter yakho.

Cofa kwiqhosha elibhalwe 'Layisha i-ACMxxx Firmware'

Khetha i [ACMxxx].bin/.img file sele ikhutshelwe i ACM kwikhompyuter yakho. I file iya kuzifaka ngokuzenzekelayo kwi-ACM ethatha phakathi kwemizuzu emi-2-5 ukuyigqiba. Eli phepha lihlaziya i Tsala & Lahla iphepha xa ligqityiwe.

Iphepha leFirmware yoHlaziyo likwasetyenziselwa ukuphucula i-firmware ye-Blustream Transmitters okanye abaFundi.
Iphepha livumela ii-Transmitter ezininzi, okanye, iiyunithi zoMamkeli ziphuculwe (oko kukuthi zonke iiReceivers ngexesha elinye, okanye, zonke iiTransmitter ngaxeshanye - hayi zombini ngaxeshanye).
Eyona nguqulo ye-firmware yangoku yee-Multicast Transmitters kunye nabaFundi banokukhutshelwa kwi-Blustream webindawo.

Ukulayisha i-firmware files, cofa iqhosha elibhalwe 'Layisha i-TX okanye iRX Firmware', emva koko 'Khetha Files'. Kanye firmware echanekileyo (.bin) file ikhethiwe kwikhompyutheni, i-firmware iya kulayisha kwi-ACM.
Nceda uqaphele: le nxalenye yokuphucula ayilayishi i-firmware kwiiyunithi ze-TX okanye ze-RX, ilayisha kuphela kwi-ACM elungele ukuthunyelwa kwi-TX okanye kwi-RX.

OKUBALULEKILEYO: Musa ukuvala okanye uhambe kude nokulayisha ngelixa uqhubeka ukuphepha idatha ye-firmware ukulahleka ngexesha lokudluliselwa kwi-ACM.
Ekugqityweni kwe-firmware files ifakwe kwi-ACM, kuya kuvela isaziso kwisikrini ukunika ingxelo malunga nempumelelo yokulayisha.
Ukugqibezela uphuculo lwe-firmware nokuba ye-Multicast Transmitter, okanye yeeyunithi zoMamkeli, cofa iqhosha elibhalwe 'Hlaziya' ecaleni kwe-Transmitter efanelekileyo okanye uMamkeli.
Nceda qaphela: kunokwenzeka kuphela ukuhlaziya ii-Transmitters, okanye abaFundi ngexesha elinye (IP200UHD / IP250UHD / IP300UHD / IP350UHD). Kwi-IP50HD, uhlaziyo lwe-firmware lunokutyhalelwa ngaphandle kwiiyunithi ezininzi ze-TX okanye ze-RX ngaxeshanye.
Siyakucebisa ukuba uhlale ucikizekile kwinethiwekhi xa iiyunithi zokuhlaziya i-firmware zokunciphisa umngcipheko wonxibelelwano kuqhagamshelo olungenazingcingo.

OKUBALULEKILEYO: Sukuqhawula uqhagamshelo lwe-ACM okanye iiyunithi ze-TX / RX ngelixa inkqubo yohlaziyo iqhubeka ukunqanda ukulahleka kwedatha ye-firmware ngexesha lokudluliselwa kwisixhobo soThutho / soMamkeli.

Hlaziya Igama Lokugqithisa

Iphasiwedi yoLawulo ye-ACM inokuhlaziywa kwi-alpha-numeric password ngokufaka iinkcazi ezitsha kolu khetho lwemenyu ye-pop-up. Cofa 'Hlaziya igama lokugqithisa' ukuze uqinisekise:

OKUBALULEKILEYO: Nje ukuba igama eligqithisiweyo loLawulo litshintshiwe, alinakufunyanwa kwakhona nguMsebenzisi. Ukuba igama eligqithisiweyo loMlawuli likhohliwe okanye lilahlekile, nceda uqhagamshelane nelungu leBlustream Iqela leNkxaso yobuGcisa eliya kukwazi ukuncedisa ekubuyiselweni kwamalungelo oLawulo lweyunithi. Jonga iidilesi ze-imeyile ngezantsi:

I-RS-232 (I-Serial) Umzila

Inkqubo ye-Multicast ineendlela ezimbini zokulawula imiqondiso ye-RS-232 yomyalelo:
Uhlobo loku-1 – Indlela eZinzisiweyo:
Indlela emileyo esisigxina yokuhambisa imiyalelo ye-RS-232 yeendlela ezimbini phakathi kwe-Multicast Transmitter ukuya kwii-Receivers ezininzi ezininzi (i-Fixed Routing). Umzila omiselweyo unokushiywa u-static phakathi kweemveliso ezimbini okanye ngaphezulu njengoxhumo olusisigxina lokudluliselwa kwedatha yokulawula i-RS-232, oku kuqwalaselwe ngokusebenzisa imenyu ye-Fixed Routing ye-ACM.
Uhlobo 2-Imo yoNdwendwe:
Ivumela udibaniso lwe-RS-232 lwesixhobo ukuba luthunyelwe ngenethiwekhi ye-IP (IP / RS-232 umyalelo ngaphakathi, ukuya ku-RS-232 ngaphandle). Uhlobo lwe-2 yeNdwendwe yeNdwendwe inika iinkqubo zokulawula umntu wesithathu amandla okuthumela i-RS-232 okanye umyalelo we-IP kwi-ACM kunye nomyalelo we-RS-232 ukuba uthunyelwe kwi-Receiver okanye i-Transmitter ngenxa yoko. Le IP ukuya kwi-RS-232 yokubonisa, ivumela inkqubo yokulawula umntu wesithathu ukuba ibe nolawulo lwezixhobo ezininzi ze-RS-232 njengoko kukho abaFundi kunye nabaThumelayo, ukusuka kunxibelelwano lwenethiwekhi ukuya kwi-ACM.
Kukho iindlela ezimbini zokwenza udidi lwesi-2-Imo yoNdwendwe:

1. Ukusebenzisa i-ACM web-GUI ukusuka kwii-Transmitters kunye ne-Receiver Action iithebhu.
2. Ngeseti yomyalelo njengoko kuchaziwe ngezantsi. Umyalelo wokuqwalasela uxhulumaniso ngulo: IN/OUT xxx SG ON

RS-232 uQhakamshelwano lweNdlela yoNdwendwe olusuka kwiNkqubo yoLawulo lweQela leSithathu:
Xa usebenzisa Imo yoNdwendwe kwizixhobo ezininzi ngaphakathi kwenkqubo, singacebisa ukuba uvule kwaye uvale Imo yoNdwendwe xa kuyimfuneko. Oku kungenxa yokuba umyalelo wothotho othunyelwa kwi-ACM uya kudluliselwa kuzo ZONKE izixhobo ezineMode yoNdwendwe evuliweyo.

1. Ukuvula uqhagamshelo lweNdlela yeeNdwendwe phakathi kwe-ACM kunye neyunithi ye-IPxxxUHD-TX okanye ye-RX lo myalelo ulandelayo kufuneka uthunyelwe nge-IP okanye nge-RS-232:
   

   INxxxGUEST	Qhagamshela kwi-TX xxx kwiNdlela yeeNdwendwe ukusuka kwi-ACM
   OUTxxxGUEST	Qhagamshela kwi-RX xxx kwiNdlela yeeNdwendwe ukusuka kwi-ACM
   Example:	Umthumeli weshumi yi-ID 010, okuthetha ukuthi 'IN010GUEST' iya kuvumela imiyalelo ye-bi-directional Uthotho / imiyalelo ye-IP ukuba ithunyelwe phakathi kwe-ACM kunye ne-Transmitter 10.

2. Emva kokuba uxhulumaniso lusekwe, nawaphi na iimpawu ezithunyelwa kwi-ACM ziya kuhanjiswa kwi-Transmitter okanye i-Receiver edibeneyo, kwaye ngokuphambene noko.
3. Ukuvala umdibaniso thumela umyalelo: CLOSEACMGUEST

Iinkcukacha

ACM200 & ACM210:

• I-Ethernet port: 2x LAN RJ45 isidibanisi (inkxaso ye-PoE eyi-1)
• I-RS-232 i-serial port: 1x DB-9 female
• I-RS-232 & I/O port: 1x 6-pin Phoenix isidibanisi (igcinelwe ukusetyenziswa kwixesha elizayo)
• I-IR yokufaka izibuko: 1x 3.5mm ijekhi yesitiriyo
• Imilinganiselo (W x D x H): 96mm x 110mm x 26mm
• Ubunzima bokuthumela (iKit): 0.6kg
• Ubushushu bokusebenza: 32°F ukuya ku-104°F (0°C ukuya ku-40°C)
• Ubushushu bokugcina: -4°F ukuya ku-140°F (-20°C ukuya ku-60°C)

Imixholo yePakeji

• 1 x ACM200 / ACM210
• I-1 x intambo yokulawula i-IR - 3.5mm ukuya kwi-3.5mm stereo kwintambo ye-mono
• 1 x 6-pin isinxibelelanisi phoenix
• 1 x Ikhithi yokuNqamisa

Isondlo

Coca le yunithi ngelaphu elithambileyo, elomileyo. Ungaze usebenzise utywala, ipeyinti encinci okanye ibenzene ukucoca leyunithi.

Imiyalelo ye-infrared ye-Blustream
I-Blustream idale i-16x igalelo kunye ne-16x ye-IR ye-output ye-IR ivumela ukhetho lomthombo ukuya kuthi ga kwi-16x ii-Transmitters ukuya kuthi ga kwi-16x Abamkeli. Ezi zahlukile kumthombo wokutshintsha ulawulo oluthunyelwe kwi-Multicast Receiver.
Kwiinkqubo ezinkulu kune-16x izixhobo zomthombo, nceda usebenzise i-RS-232 okanye ulawulo lwe-TCP/IP.
Kwisiseko sedatha esipheleleyo semiyalelo ye-IR ye-Multicast, nceda undwendwele i-Blustream webiphepha lendawo kuyo nayiphi na imveliso ye-Multicast, cofa kwiqhosha elithi "Abaqhubi kunye neeProtokholi", kwaye ujonge kwisiqulathi seefayili esibizwa ngokuba "Ulawulo lwe-IR ye-Multicast".

RS-232 kunye neMiyalelo yeTelnet

Inkqubo ye-Blustream Multicast inokulawulwa nge-serial kunye ne-TCP / IP. Nceda ujonge kwiphepha loqhagamshelo le-RS-232 ukuya ekuqaleni kwale ncwadana yokuseta kwaye ucinezele. Kwi-ACM200 kunye ne-ACM210, kukho amaxwebhu e-API afumanekayo ukukhuphela kwi-Blustream webindawo egquma yonke imiyalelo enokwenzeka enokuthunyelwa nge TCP/ IP okanye Uthotho kwiiyunithi.
Iimpazamo eziqhelekileyo

• Ukubuyiswa kwekhareji - Ezinye iinkqubo azifuni ukubuyiswa kwenqwelo apho enye ingayi kusebenza ngaphandle kokuba ithunyelwe ngokuthe ngqo emva komtya. Kwimeko yesoftware yeterminal uphawu isetyenziselwa ukuphumeza ukubuyiswa kwekhareji. Kuxhomekeke kwiprogram oyisebenzisayo lo mqondiso mhlawumbi eyahlukileyo. Nantsi enye exampukuba ezinye iinkqubo zolawulo zibeka iquka \r okanye 0D (kwi-hex).
• Izithuba - iACM200 inokusebenza nathi ngaphandle kweendawo. Isuka nje ibahoye. Isenokusebenza no-0 ukuya ku-4 amanani.umz: u-1 uyafana no-01, 001, 0001
  – Indlela umtya ekufuneka ijongeke ngayo ngolu hlobo lulandelayo OUT001FR002
  -Indlela intambo inokujongeka ngayo ukuba izithuba zifunwa yinkqubo yolawulo: OUT{Space}001{Space}FR002
• Umlinganiselo we-Baud okanye ezinye iisetingi zothotho lweprotocol azichanekanga

Nceda qaphela: elona nani liphezulu loThutho (yyy) kunye nabaFumana (xxx) = izixhobo ezingama-762 (001-762)
– Abamkeli (iziphumo) = xxx
– Abadluliseli (amagalelo) = yyy
– Imveliso yesikali = rr
– EDID Useto lweNgeniso = zz
– Ireyithi yeBaud = br
– GPIO igalelo/amazibuko emveliso = gg

Kuluhlu olupheleleyo lwayo yonke imiyalelo ye-API ye-ACM200 kunye ne-ACM210, nceda ubone uXwebhu oluPhezulu lweModyuli yoLawulo lwe-API epapashwe kwi-Blustream webindawo.

Ingxelo yesimo sampLes
Umyalelo: STATUS
Ingxelo ye-STATUS inika isipheloview yenethiwekhi iACM iqhagamshelwe ku:
=================================================== ===============
IP Ibhokisi yokulawula i-ACM200 yeNkcukacha yeNdawo
Inguqulelo yeFW: 1.14
Amandla IR Baud
Nge57600
Kwi-EDID IP NET/Sig
001 DF009 169.254.003.001 Vula / Vula
002 DF016 169.254.003.002 Vula / Vula
Ngaphandle kwi-IP NET/HDMI Res Mode
001 001 169.254.006.001 Vula /Cima 00 VW02
002 002 169.254.006.002 Vula /Cima 00 VW02
I-LAN DHCP IP Gateway SubnetMask
01_POE Off 169.254.002.225 169.254.002.001 255.255.000.000
02_CTRL Off 010.000.000.225 010.000.000.001 255.255.000.000
I-Telnet LAN01 MAC LAN02 MAC
0023 34:D0:B8:20:4E:19 34:D0:B8:20:4E:1A
=================================================== ===============
Umyalelo: OKUPHUMILEYO xxx STATUS
I-OUT xxx STATUS ingxelo inika i-overview yemveliso (umamkeli: xxx). Kubandakanya: i-firmware, imowudi, indlela esisigxina, igama njl.
=================================================== ===============
IP Ibhokisi yokulawula i-ACM200 yoLwazi lweZiphumo
Inguqulelo yeFW: 1.14
Phuma kwiNdlela yoMnatha ye-HPD ye-Ver Res Jikelezisa igama
001 On Off A7.3.0 VW 00 0 Umamkeli 001
Fast Fr Vid/Aud/IR_/Ser/USB/CEC HDR MCas
Kwi 001 001/004/000/000/002/000 Kwi
CEC DBG Yolula IR BTN LED SGEn/Br/Bit
Ivuliwe Ngo-3 Valiwe /9/8n1
I-IM MAC
Static 00:19:FA:00:59:3F
IP GW SM
169.254.006.001 169.254.006.001 255.255.000.000
=================================================== ===============
Ingxelo yesimo sampLes
Umyalelo: INXA XIX STATUS
Uphelileview yegalelo (Transmitter: xxx). Kubandakanya: i-firmware, iaudio, igama njl.
=================================================== ===============
IP Box Control Box ACM200 Input Info
Inguqulelo yeFW: 1.14
Kwi-Net Sig Ver EDID Aud MCast Igama
001 Kwi-A7.3.0 DF015 HDMI Kwi-Transmitter 001
I-CEC LED SGEn/Br/Bit
Ngo-3 Off /9/8n1
I-IM MAC
Static 00:19:FA:00:58:23
IP GW SM
169.254.003.001 169.254.003.001 255.255.000.000
=================================================== ===============
Umyalelo: IMEKO ye-VW
I-VW STATUS iya kubonisa yonke ingxelo yemo ye-VW ye-Video Wall arrays kwinkqubo. Uluhlu lwevidiyo olongezelelweyo lweWall luya kuba nengxelo yesimo somntu ngamnye okt 'VW 2 STATUS'.
=================================================== ===============
IP Control Box ACM200 Video Wall Info
Inguqulelo yeFW: 1.14
VW Col Row CfgSel Igama
02 02 02 02 Udonga lweVidiyo 2
I-OutID
001 002 003 004
Igama leCFG
01 Ulungelelwaniso 1
Iqela elivela kwiSkrini
A 004 H01V01 H02V01 H01V02 H02V02
02 Ulungelelwaniso 2
Iqela elivela kwiSkrini
A 002 H02V01 H02V02
B 001 H01V01 H01V02
=================================================== ===============

Ukulungisa ingxaki kwi-ACM

Zama ukusebenzisa le miyalelo ingezantsi ukuvavanya i-ACM kufuneka kubekho ubunzima xa usebenzisa ikhompyutha ukulawula i-ACM.

1. Xhuma ikhompyutha ngokuthe ngqo kwi-ACM Control Port ngentambo yeCAT
2. Ikhompyutheni kufuneka ibe kuluhlu olufanayo kunye ne-LAN uxhumano 1 kwisixhobo se-ACM (inethiwekhi yoLawulo) njengoko oku kuya kulinganisa ulawulo oluvela kwinkqubo yokulawula umntu wesithathu (okt Control4, RTI, ELAN njl). Nceda ujonge imiyalelo engasemva kule ncwadana yemigaqo 'Yokutshintsha iinkcukacha ze-IP zekhompyutha yakho'.
3. Vula inkqubo ye-cmd.exe (i-Command prompt). Sebenzisa isixhobo sokukhangela sekhompyuter ukuba awuqinisekanga ukuba ibekwe phi na.
4. Faka lo mgca womyalelo ulandelayo 'Telnet 192.168.0.225'
   Le festile ilandelayo iya kuboniswa ukuqinisekisa ukuba ungene kwi-ACM ngempumelelo:

Impazamo yeTelnet
Ukuba umyalezo wemposiso: 'i-telnet ayibonwa njengomyalelo wangaphakathi okanye wangaphandle, inkqubo esebenzayo okanye ibhetshi file', yenza iTelnet isebenze kwikhompyuter yakho.
Ayikwazanga ukubona izibuko ze-LAN ze-ACM
Ukuba awukwazi ukunxibelelana (ping) izibuko ze-ACM, qhagamshela ngokuthe ngqo kwi-network switch kwaye ungasebenzisi i-DHCP modem router ukuvavanya.
Iyakwazi ukucofa imveliso kodwa ungangeni ngoqhagamshelwano lweTelnet
Ukuba awukwazi ukunxibelelana (ping) izibuko ze-ACM, qhagamshela ngokuthe ngqo kwi-network switch kwaye ungasebenzisi i-DHCP modem router ukuvavanya.

Ukulungelelanisa iiSetingi zeKhompyutha yakho-Ukunika amandla iTFTP kunye neTelnet

Ngaphambi kokusebenzisa inkqubo yePC yohlaziyo lweFirmware yeBlustream ACM kufuneka uvule zombini iimpawu zeTFTP kunye neTelnet kwikhompyuter yakho. Oku kuphunyezwa ngokusebenzisa la manyathelo alandelayo angezantsi:

1. KwiWindows, yiya kuQala -> Iphaneli yokulawula -> Iinkqubo kunye neempawu
2. KwiNkqubo kunye neMicimbi yesikrini, khetha Vula okanye uvale iifitsha zeWindows kwibha yokukhangela esekhohlo.
3. Nje ukuba iwindow yeempawu zeWindows ivele, skrolela ezantsi kwaye uqinisekise ukuba "umxhasi weTFTP" kunye "noMxumi weTelnet" zombini zikhethiwe.
4. Nje ukuba ibar yenkqubela phambili izalise kwaye i-pop up iyanyamalala, umxhasi we-TFTP uvuliwe.

Ukuseta idilesi ye-IP esisigxina kwi-Windows 7, 8, 10 okanye 11
Ukuze unxibelelane ne-ACM ikhomputha yakho kufuneka kuqala ibe kuluhlu lwe-IP olufanayo noLawulo lwe-ACM okanye izibuko ze-Video LAN. Ngokungagqibekanga amazibuko anedilesi ye IP ilandelayo:

Lawula izibuko le-LAN	192.168.0.225
Izibuko ze-LAN yevidiyo	169.254.1.253

Le miyalelo ilandelayo ikuvumela ukuba uguqule ngesandla idilesi ye-IP yekhompyuter yakho ikuvumela ukuba unxibelelane neemveliso zeBlustream Multicast.

1. Kwi-Windows, chwetheza 'inethiwekhi kunye nokwabelana' kwibhokisi yokukhangela
2. Xa iNethiwekhi kunye noKwabelana kwesikrini sivula, cofa ku 'Tshintsha useto lweadaptha'.
3. Cofa ekunene kwiadaptha yakho ye-Ethernet kwaye ucofe iiProperties
4. Kwifestile yeePropati zoQhagamshelwano lweNdawo yeNgingqi gqamisa iProtokholi ye-Intanethi ye-4 (TCP/IPv4) emva koko ucofe i Iipropati iqhosha.
5. Khetha iqhosha lerediyo Sebenzisa le dilesi ye-IP ilandelayo kwaye ngenisa i-IP echanekileyo, i-Subnet mask, kunye nesango eliMiselweyo elihambelana nokucwangcisa inethiwekhi yakho.
6. Cofa u-Kulungile kwaye uvale zonke izikrini zenethiwekhi. Idilesi yakho yeIP ngoku ilungisiwe.

Amanqaku…

www.blustream.co.uk
www.blustream.com.au
www.blustream-us.com

Amaxwebhu / Izibonelelo

I-BLUSTREAM ACM200 Multicast Advanced Control Module [pdf] Incwadi yokusebenzisa ACM200 Multicast Advanced Control Module, ACM200, Multicast Advanced Control Module, Advanced Control Module, Control Module, Module

Iimbekiselo

• Incwadi yokusebenzisa