Blustream Multicast ACM200/ACM210
Babban Module Kulawa
Manual mai amfaniBita 1.3 - Agusta 2023

Na gode da siyan wannan samfurin Blustream
Don ingantaccen aiki da aminci, da fatan za a karanta waɗannan umarnin a hankali kafin haɗawa, aiki ko daidaita wannan samfur. Da fatan za a kiyaye wannan littafin don tunani na gaba.
An ba da shawarar na'urar kariya ta karuwa
Wannan samfurin ya ƙunshi abubuwa masu mahimmanci na lantarki waɗanda za su iya lalacewa ta hanyar spikes na lantarki, ƙwanƙwasa, girgiza wutar lantarki, bugun walƙiya, da sauransu. An ba da shawarar yin amfani da tsarin kariya mai ƙarfi don kariya da tsawaita rayuwar kayan aikin ku. Tsaro da sanarwar aiki
Kar a musanya ko amfani da wata wutar lantarki ban da samfuran hanyar sadarwa na PoE da aka amince da su ko samar da wutar lantarki na Blustream da aka amince da su.
Kada a sake haɗa rukunin ACM200/ACM210 saboda kowane dalili. Yin hakan zai ɓata garantin masana'anta.

Gabatarwa

Dandalin rarrabawar Multicast ɗinmu yana ba da damar rarraba bidiyo na HDMI akan canjin hanyar sadarwa da aka sarrafa. ACM200 & ACM210 Advanced Control Modules (wanda aka sani da 'ACM' daga wannan gaba gaba a cikin wannan jagorar) suna ba da izinin sarrafa ɓangare na uku na tsarin Multicast na Blustream ta amfani da TCP/IP, RS-232 da IR.
ACM ya ƙunshi a web Tsarin dubawa don sarrafawa da daidaitawa na tsarin Multicast da fasali 'Jawo & Drop' zaɓin tushen zaɓi tare da kafofin watsa labarai preview da kuma sarrafa kai tsaye na Bidiyo, Audio (ba akan tsarin IP50HD ba), IR, RS232, da USB / KVM. Direbobin samfuran Blustream da aka riga aka gina suna sauƙaƙe shigarwar samfur na Multicast kuma suna watsi da buƙatar fahimtar hadaddun kayan aikin cibiyar sadarwa.
Wannan Jagorar Mai Amfani ya ƙunshi fasali da ayyuka na duka samfuran ACM200 da ACM210 Babban Sarrafa Module na Blustream.
Ana amfani da ACM200 a halin yanzu don tsarin IP50HD, IP200UHD da IP250UHD kawai.
Ana iya amfani da ACM210 don tsarin IP50HD, IP200UHD, IP250UHD, IP300UHD da tsarin IP350UHD.
Lura: Tsarin IP200UHD da IP250UHD suna yin aiki tare. IP300UHD da tsarin IP350UHD suna aiki tare.
IP50HD tsari ne na tsaye kuma baya yin mu'amala tare da ɗaya daga cikin sama 2 na tsarin Multiciast.

Siffofin

• Web tsarin dubawa don daidaitawa da sarrafa tsarin Blustream Multicast
• Zaɓin tushen 'Jawo & Drop' mai hankali tare da pre-bidiyoview fasalin don saka idanu mai aiki na matsayin tsarin
• Babban sarrafa sigina don sarrafa kansa na Bidiyo, Audio, IR, RS-232, da USB/KVM
• Tsarin tsarin atomatik
• Haɗin LAN 2x RJ45 don haɗa hanyar sadarwar data kasance zuwa cibiyar sadarwar rarraba bidiyo ta Multicast, yana haifar da:
  - Kyakkyawan aikin tsarin kamar yadda zirga-zirgar hanyar sadarwa ta rabu
  – Babu saitin cibiyar sadarwa na ci gaba da ake buƙata
  - Adireshin IP mai zaman kansa ta hanyar haɗin LAN
  - Yana ba da damar sauƙaƙe ikon sarrafa TCP/IP na tsarin Multicast
• Haɗin RS-232 don sarrafa tsarin Multicast
• Haɗin IR don sarrafa tsarin Multicast
• PoE (Power over Ethernet) don kunna ACM daga PoE sauya
• Wutar wutar lantarki na gida na 12V (na zaɓi) yakamata ya canza baya goyan bayan PoE
• Goyon bayan iOS da Android App iko (bincika: "Jawo da Drop Control")
• Direbobi na 3rd akwai don mafi yawan samfuran sarrafawa

Bayani mai mahimmanci:
Tsarin Multicast na Blustream yana rarraba bidiyo na HDMI akan kayan aikin cibiyar sadarwa da aka sarrafa. Ana ba da shawarar cewa samfuran Blustream Multicast an haɗa su akan canjin hanyar sadarwa mai zaman kanta (ko VLAN) don hana tsangwama mara amfani, ko rage aikin sigina saboda wasu buƙatun bandwidth na samfuran cibiyar sadarwa.
Da fatan za a karanta kuma ku fahimci umarnin a cikin wannan jagorar kuma tabbatar da cewa an saita canjin hanyar sadarwa daidai kafin haɗa kowane samfuran Multicast Multicast. Rashin yin hakan zai haifar da matsaloli tare da daidaita tsarin da aikin bidiyo.

Bayanin panel - ACM200 & ACM210

1. RS-232 tashar tashar sarrafawa - haɗi zuwa na'urar sarrafawa na ɓangare na uku don sarrafa tsarin Multicast ta amfani da RS232.
2. MCU Haɓaka jujjuya - yi amfani lokacin haɓaka firmware MCU kawai. Bar a matsayin al'ada don daidaitaccen aiki.
3. Sake saitin - gajeriyar latsa tana sake kunna ACM, dogon latsa (daƙiƙa 10) masana'anta sun lalata ACM.
4. Canjin matakin IO - an tanada don amfani na gaba.
5. IO Level phoenix - an tanada don amfani na gaba.
6. Bidiyo LAN (PoE) - haɗi zuwa cibiyar sadarwar da aka haɗa abubuwan Blustream Multicast.
7. Sarrafa tashar tashar LAN – haɗi zuwa cibiyar sadarwar data kasance wacce tsarin sarrafa ɓangare na uku ke zaune a kai. Ana amfani da tashar LAN mai sarrafawa don sarrafa Telnet/IP na tsarin Multicast. Ba PoE.
8. IR Ctrl (shigarwar IR) - jack sitiriyo 3.5mm. Haɗa zuwa tsarin sarrafawa na ɓangare na uku idan amfani da IR azaman hanyar da aka zaɓa na sarrafa tsarin Multicast. Lokacin amfani da sitiriyo 3.5mm da aka haɗa zuwa kebul na mono, tabbatar da cewa hanyar kebul ɗin daidai ce.
9. IR - daidaita IR voltage matakin tsakanin shigarwar 5V ko 12V don IR Ctrl.
10. Alamar wutar lantarki
11. Tashar wutar lantarki - yi amfani da adaftar 12V 1A DC (wanda aka siyar daban) idan ba amfani da hanyar sauya hanyar sadarwa ta PoE ba.

ACM Control Ports

Tashoshin sadarwa na ACM suna kan bangarorin biyu na ƙarshe kuma sun haɗa da haɗin kai masu zuwa:

Haɗin kai:
A. TCP/IP - don sarrafa tsarin Multicast (mai haɗa RJ45)
B. Infrared (IR) Input* - 3.5mm jack sitiriyo - don Multicast I / O ikon sauyawa kawai
C. RS-232 - don Multicast tsarin kula da RS-232 wucewa ta (DB9)
Lura: Ana iya amfani da ACM200 tare da tsarin layin 5V da 12V IR. Da fatan za a tabbatar cewa an zaɓi sauyawa (kusa da tashar tashar IR) daidai da ƙayyadaddun shigar da layin IR daga tsarin sarrafawa.
TCP/IP:
Ana iya sarrafa Blustream ACM ta hanyar TCP/IP. Don cikakken jerin ladabi da fatan za a duba takaddun 'Api Commands' daban wanda za'a iya saukewa daga Blustream. website. Ya kamata a yi amfani da jagorar facin 'daidai-ta-hannu' RJ45 lokacin da aka haɗa ta zuwa canjin hanyar sadarwa.
Tashar Jirgin Ruwa: 23
Tsoho IP: 192.168.0.225
Tsohuwar Sunan mai amfani: admin
Tsoffin Kalmar wucewa: 1 2 3 4
Lura: a farkon shiga ACM, za a buƙaci sabon kalmar sirri don shigar da shi. Ba zai yiwu a sake saita wannan ba tare da sake saita naúrar ACM ba. Da fatan za a tabbatar cewa an rubuta sabon kalmar sirri kuma an adana shi don tunani a gaba.
RS-232 / Serial:
Ana iya sarrafa ACM ta hanyar serial ta amfani da mahaɗin DB9. Saitunan tsoho a ƙasa. Don cikakken jerin ladabi da fatan za a duba takaddun 'Api Commands' daban wanda za'a iya saukewa daga Blustream. website.
Farashin: 57600
Data Bit: 8-bit
Daidaitawa: Babu
Tsaida Bit: 1-bit
Ikon Yawo: Babu
Ana iya daidaita ƙimar baud na ACM ta amfani da web-GUI, ko ta hanyar ba da umarni mai zuwa ta hanyar RS-232 ko Telnet:
RSB x : Saita RS-232 Baud Rate zuwa X bps
Ina X = 0: 115200
1: 57600 ku
2: 38400 ku
3: 19200 ku
4: 9600 ku

ACM Control Ports - Ikon IR

Ana iya sarrafa tsarin Multicast ta amfani da ikon IR na gida daga tsarin kulawa na ɓangare na uku. Zaɓin zaɓi shine kawai fasalin da ake samu lokacin amfani da kulawar IR na gida - abubuwan ci gaba na ACM kamar yanayin bangon bidiyo, saka sauti da sauransu kawai za'a iya samun su ta amfani da RS-232 ko TCP/IP iko.
Blustream sun ƙirƙiri shigarwar 16x & 16x fitarwa umarnin IR wanda ke ba da izinin zaɓin tushen har zuwa 16x Multicast Transmitters akan har zuwa 16x Multicast Receivers. Don tsarin da ya fi girma na na'urorin tushen 16x, RS-232 ko sarrafa TCP/IP za a buƙaci.

ACM ya dace da duka 5V da 12V IR kayan aiki. Lokacin da ake amfani da ACM don karɓar shigarwar IR a cikin tashar IR CTRL, dole ne a kunna maɓallin da ke kusa da shi daidai don dacewa da IR vol.tage layin tsarin sarrafawa da aka zaɓa kafin haɗi.
Lura: kebul ɗin da aka kawo na Blustream IR duk 5V ne
3.5mm Sitiriyo zuwa Mono Cable - IR-CAB (an haɗa)
Blustream IR Control USB 3.5mm Mono zuwa 3.5mm Stereo don haɗa hanyoyin sarrafawa na ɓangare na uku zuwa samfuran Blustream.
Mai jituwa tare da samfuran ɓangare na uku na 12V IR.
Da fatan za a lura: Kebul na jagora ne kamar yadda aka nuna

Mai karɓar IR - IRR - jack na sitiriyo 3.5mm (na zaɓi)
Mai karɓar Blustream 5V IR don karɓar siginar IR da rarraba ta samfuran Blustream

Wiring fil - IR-CAB - jack na sitiriyo 3.5mm:

Wiring fil - IR-CAB - jack mono 3.5mm:

Haɗin Intanet ACM

ACM yana aiki azaman gada tsakanin hanyar sadarwa mai sarrafawa da hanyar sadarwar bidiyo don tabbatar da cewa bayanan da ke tafiya tsakanin cibiyoyin sadarwa biyu ba su gauraya ba. Dole ne a haɗa ACM ta hanyar kebul na CAT daidai da buƙatun hanyar sadarwa.

Web- GUI Jagora

The web-GUI na ACM yana ba da damar cikakken tsari na sabon tsarin, kazalika da ci gaba da kiyayewa da sarrafa tsarin da ke akwai ta hanyar web portal.
Ana iya samun damar ACM (a ƙarshe) akan kowace na'ura mai haɗin Intanet da suka haɗa da: tablets, smart phones da kwamfutar tafi-da-gidanka waɗanda ke kan hanyar sadarwar 'Control' iri ɗaya. Ana jigilar ACM tare da adreshin IP na tsaye (kamar yadda yake ƙasa), kuma ba a saita shi tare da kunna DHCP ba.

Shiga / Shiga

Muna ba da shawarar cewa an haɗa kwamfutar / kwamfutar tafi-da-gidanka kai tsaye zuwa tashar sarrafawa ta ACM don farkon tsarin sabon tsarin. Kamar yadda aka ambata a baya, ana jigilar ACM tare da adreshin IP na tsaye, ba DHCP ba. Akwai umarnin yadda ake gyara adreshin IP na kwamfuta / kwamfutar tafi-da-gidanka zuwa bayan wannan littafin.
Don shiga, buɗe a web browser (watau Safari, Firefox, MS Edge da sauransu) kuma kewaya zuwa tsoffin adiresoshin IP na ACM wanda shine: 192.168.0.225

Ana gabatar da shafin sa hannu akan haɗin kai zuwa ACM. Tsohuwar kalmar sirri ta admin ita ce: 1 2 3 4
ACM yana buƙatar sabon kalmar sirri don saitawa ga Mai gudanarwa a farkon shiga. Ba zai yiwu a sake saita wannan ba tare da sake saita naúrar ACM ba. Da fatan za a tabbatar cewa an rubuta sabon kalmar sirri kuma an adana shi don tunani a gaba. Da zarar an ƙirƙiri sabon kalmar sirri, ACM zai buƙaci wannan sau ɗaya gaba don shiga cikin menu na gudanarwa na rukunin.

Sabon Mayen Saita Aikin

A farkon shiga na ACM, za a gabatar da Wizard Saita don daidaita duk abubuwan da ke cikin tsarin Multicast. An tsara wannan don haɓaka sabon tsarin tsarin kamar yadda duk tsoho / sabon Multicast Transmitters & Masu karɓa za a iya haɗa su zuwa canjin hanyar sadarwa a lokaci guda, yayin da ba ya haifar da rikici na IP yayin tsarin tsarin. Wannan yana haifar da tsarin da duk abubuwan da aka gyara ana sanya su ta atomatik kuma a jere suna da adireshin IP da aka shirya don amfanin tsarin asali.

Ana iya soke Wizard Saitin ACM ta danna 'Rufe'. Da fatan za a sani cewa ba za a daidaita tsarin ba a wannan lokacin, amma ana iya ci gaba da ziyartar menu na 'Project'. Idan Project File ya riga ya kasance (watau maye gurbin ACM akan wani rukunin yanar gizon da ake da shi), ana iya shigo da wannan ta amfani da adana .json file ta danna 'Import Project'.
Danna 'Next' don ci gaba da saiti:

Idan a wannan lokacin ba a saita kayan aikin hanyar sadarwa da aka zaɓa don amfani da tsarin Blustream Multicast ba, danna kan hyperlink 'jagororin saitin saitin hanyar sadarwa' don kewaya zuwa tsakiya. webshafi mai dauke da jagororin Canjawar hanyar sadarwa gama gari.
TsohonampZa a iya samun dama ga zane-zane na haɗin gwiwar ACM ta hanyar latsa maɓallin hyperlink mai alamar 'tsari'. Wannan zai tabbatar da an haɗa ACM daidai zuwa tsarin Multicast mai faɗi kafin fara Wizard Saita. Da zarar an tabbatar da haɗin ACM, danna 'Na gaba'.
A lokacin amfani na yau da kullun, ACM za ta gudanar da zaɓe don sabunta matsayi da kuma ɗaukar allo na kafofin watsa labarai da ke tafiya cikin tsarin. Zaɓen wannan bayanin koyaushe yana da tasiri tare da manyan tsarin (maki 75+ na ƙarshen). Na gaba stage na daidaitawa shine pre-ayyana girman aikin. Zaɓuɓɓukan anan sune:
0-75 Samfura
75+ Samfura
Ana iya daidaita wannan saitin nan gaba idan girman tsarin ya karu.
Danna maɓallin da ya dace don zaɓar girman tsarin:

Akwai hanyoyi guda biyu don ƙara sabbin na'urorin watsawa da na'urar karɓa zuwa tsarin:
Hanyar 1: haɗa ALL Transmitter da Receiver raka'a zuwa cibiyar sadarwa sauya. Wannan hanyar za ta hanzarta saita duk na'urori tare da adiresoshin IP na kansu dangane da masu zuwa:
Masu watsawa:
Za a sanya wa Mai watsawa na farko adireshin IP na 169.254.3.1. Za a sanya wa Mai watsawa na gaba adireshin IP na 169.254.3.2, da sauransu….
Da zarar kewayon IP na 169.254.3.x ya cika (raka'a 254), software za ta sanya adireshin IP ta atomatik 169.254.4.1, da sauransu…
Da zarar kewayon IP na 169.254.4.x ya cika software zai sanya adireshin IP ta atomatik 169.254.5.1, da sauransu har zuwa 169.254.4.254.
Masu karɓa:
Za a sanya mai karɓa na farko adireshin IP na 169.254.6.1. Za a sanya mai karɓa na gaba adireshin IP na 169.254.6.2, da sauransu….
Da zarar an cika kewayon IP na 169.254.6.x (raka'a 254) software za ta sanya adireshin IP ta atomatik 169.254.7.1, da sauransu…
Da zarar kewayon IP na 169.254.7.x ya cika software zai sanya adireshin IP ta atomatik 169.254.8.1, da sauransu har zuwa 169.254.8.254.
Da zarar an gama, za a buƙaci a gano na'urori da hannu - wannan hanyar za ta sanya adiresoshin IP da ID na samfur ta atomatik ga kowace na'urar da aka haɗa da canjin hanyar sadarwa ba da gangan ba (ba ta hanyar tashar tashar sauyawa ba).
Hanyar 2: haɗa kowane Blustream Multicast Transmitter da Mai karɓa zuwa cibiyar sadarwa ɗaya-bayan-daya. Saita Wizard zai saita raka'a a jere kamar yadda aka haɗa / samu. Wannan hanyar tana ba da damar sarrafa jerin adiresoshin IP da ID na kowane samfur - don haka ana iya yiwa raka'o'in watsawa / mai karɓa lakabin daidai.
... duba shafi na gaba don bayanin yanayin HDCP
Yanayin HDCP: Blustream Multicast Receivers suna ƙara HDCP mai dacewa ta atomatik a kan rafi mai fita (ko da kuwa ko tushen na'urar tana da HDCP a cikin rafi mai fita).
Maɓallan radial na Yanayin HDCP suna ba da izinin tilasta HDCP, ko bi ƙa'idodin gama gari.
Lokacin amfani da kayan kasuwanci (kamar kayan aikin VC) inda babu HDCP da aka lullube kan fitarwa na siginar tushe, kuma ana amfani da na'urorin da ba HDCP ba akan RX / fitarwa (watau software na kama), muna ba da shawarar saita tsarin. zuwa 'Bypass'.
Juya linzamin kwamfuta akan ƙaramin alamar “bayanai” (wanda aka haskaka a hoton da ke ƙasa cikin shuɗi) yana ba da bayani a cikin GUI.
Da fatan za a kula: Yanayin 'Bypass' baya "tuɓe" HDCP daga siginar HDMI. Idan a yanayin 'Bypass', siginar HDCP1.x zai haifar da wuce HDCP1.x ta cikin tsarin. Idan babu HDCP akan siginar, raka'o'in Multicast ba za su ƙara HDCP ba idan a cikin 'Bypass'.
Da zarar an zaɓi hanyar saita tsarin don saita tsarin, danna maɓallin 'Fara Scan' (wanda aka haskaka a ƙasa).
ACM za ta nemo sabbin raka'a Multicast Blustream akan hanyar sadarwa, kuma za ta ci gaba da neman sabbin na'urori har sai lokacin kamar:
– Ana danna maɓallin 'Tsaya Scan' kore
- Ana danna maɓallin 'Next' mai shuɗi don ci gaba da Wizard na Saita da zarar an sami duk raka'a.

Kamar yadda ACM ke samun sabbin raka'a, raka'o'in za su cika zuwa ginshiƙan da suka dace masu alamar Transmitters ko Receivers.
Ana ba da shawarar yin lakabin raka'a ɗaya a wannan lokacin.
Za a daidaita raka'o'in Multicast tare da sabon bayanin adireshin IP a wannan lokacin, kuma za su sake yin aiki ta atomatik.
Da zarar an samo dukkan raka'a kuma an daidaita su, danna 'Tsaya Scan', sannan 'Na gaba'.
Shafin Saita na'ura yana ba da damar masu watsawa da masu karɓa don a sanya sunansu daidai da haka. Ana iya saita saitunan EDID da Scaler don masu watsawa ko masu karɓa kamar yadda ake buƙata. Don taimako tare da saitunan EDID da Scaler, danna maɓallan da suka dace masu alamar 'Taimakon EDID' ko 'Taimakon Sikeli'.

Siffofin shafin Saita Na'ura sun haɗa da:

1. Sunan na'urori - a lokacin daidaitawa ana sanya masu watsawa / masu karɓa ta atomatik sunaye tsoho watau Transmitter 001 da dai sauransu. Ana iya canza sunan Transmitter / Mai karɓa ta hanyar buga a cikin akwatin da ya dace.
2. EDID - gyara ƙimar EDID don kowane Mai watsawa (tushen). Ana amfani da wannan don buƙatar takamaiman ƙudurin bidiyo da sauti don na'urar tushe don fitarwa. Ana iya samun taimako na asali tare da zaɓin EDID ta danna maɓallin da aka yiwa alama 'Taimakon EDID'. Lura, tsoho EDID don kayan aikin Blustream shine: 1080p, 2ch audio.
3. View (masu watsawa kawai) - yana buɗe fafutuka masu zuwa:Wannan fitowar yana nuna hoton da aka rigayaview na kafofin watsa labarai a halin yanzu ana karɓa daga sashin watsawa don yin suna. Hakanan iya gano naúrar ta hanyar walƙiya wutar lantarki ta gaban panel akan naúrar, da ikon Sake yi naúrar duk za su taimaka wajen tantance naúrar don yin suna.
4. Scaler - daidaita ƙudurin fitarwa ta amfani da ginanniyar sikelin bidiyo na Mai karɓar Multicast. Scaler yana iya haɓakawa da saukar da siginar bidiyo mai shigowa.
5. Ayyuka - yana buɗe fafutuka masu zuwa:Ta hanyar tsoho, yayin daidaitawa, OSD zai bayyana akan duk allon da aka haɗa zuwa raka'o'in mai karɓa don sauƙin ganewa na masu karɓa. Hakanan ikon gano raka'a ɗaya ta hanyar walƙiya gaban panel Power LED's, da ikon Sake yi naúrar yana ƙunshe a nan.
6. Kashe / Kunna OSD - yana jujjuya ID ɗin samfur akan duk fuska / nuni da aka haɗa (a kan tsoho yayin daidaitawa - OSD zai kashe ta atomatik yayin da mayen ke ci gaba).
7. Na gaba - yana ci gaba zuwa shafin Kammala Wizard

Shafin Kammala Wizard yana ƙaddamar da tsarin daidaitawa na asali, yana ba da hanyoyin haɗin da aka saba amfani da su don zaɓuɓɓukan saiti na ci gaba don bangon Bidiyo (ba a samuwa ga tsarin IP50HD), Ƙaƙwalwar Siginar Ƙaƙƙarfan (IR, RS-232, Audio da dai sauransu), da ikon dawowa. -har zuwa tsari file (shawarar).
Danna 'Gama' da zarar an kammala don ci gaba zuwa shafin 'Jawo & Drop Control'.

Web-GUI - Menu Overview

Menu na 'User Interface' yana ba mai amfani da baƙo ikon canzawa da rigaview tsarin Multicast ba tare da barin damar yin amfani da duk wani saiti wanda zai iya gyara dukkanin kayan aikin tsarin ba.

1. Jawo & Sarrafa Sarrafa – sarrafa zaɓin tushe don kowane Mai karɓa na Multicast gami da gabanin hotoview na tushen na'urorin a ko'ina cikin tsarin
2. Ikon bangon Bidiyo - ana amfani da shi don 'Jawo & Drop' ikon zaɓin tushen zaɓi don tsararrun bangon bidiyo a cikin tsarin, gami da prefin hoto.view na tushen na'urorin a ko'ina. Abun menu kawai akwai inda aka saita bangon bidiyo a cikin tsarin
3. Shiga – ana amfani da shi don shiga cikin tsarin azaman Mai amfani, ko Mai Gudanarwa

Ana samun dama ga menu na Mai gudanarwa daga kalmar sirri guda ɗaya kamar yadda aka saita yayin saitin farko. Wannan menu yana ba da izinin daidaita tsarin Multicast gaba ɗaya, tare da samun dama ga duk saituna da fasalulluka na tsarin.
Da fatan za a kula: ba a ba da shawarar barin damar mai gudanarwa ko kalmar sirrin mai gudanarwa tare da mai amfani na ƙarshe ba.

1. Jawo & Sarrafa Sarrafa – sarrafa zaɓin tushe don kowane Mai karɓa gami da pre-hotoview na tushen na'urorin
2. Ikon bangon Bidiyo – sarrafa zaɓin tushen don tsararrun bangon bidiyo, gami da gabanin hotoview na tushen na'urorin
3. Preview - Nuna rafin bidiyo mai aiki daga kowane mai haɗawa da/ko mai karɓa
4. Aikin - view ko saita sabon tsarin Blustream Multicast
5. Masu watsawa - taƙaitaccen duk masu watsawa da aka shigar, tare da zaɓuɓɓuka don sarrafa EDID, duba sigar FW, sabunta saitunan, ƙara sabon TX's, maye gurbin ko sake kunna samfuran.
6. Masu karɓa - taƙaitaccen duk masu karɓa da aka shigar, tare da zaɓuɓɓuka don fitarwa na ƙuduri (HDR / scaling), aiki (yanayin bangon bidiyo / matrix), saitunan sabuntawa, ƙara sabon RX's, maye gurbin ko sake kunna samfuran.
7. Kafaffen Hanyar Siginar - saita tsarin kai tsaye na Bidiyo, Audio, IR, Serial, USB, ko alamun CEC
8. Kanfigareshan bangon Bidiyo – saiti da daidaitawa na Masu karɓa don ƙirƙirar bangon bangon bidiyo har zuwa girman 9 × 9, gami da: bezel / ramuwa, shimfiɗa / dacewa, da juyawa. (Da fatan za a lura: Ba a tallafawa bangon bidiyo tare da tsarin IP50HD).
9. Masu amfani – saiti ko sarrafa masu amfani da tsarin
10. Saituna - saitunan tsarin ciki har da: bayanan cibiyar sadarwa, aikin sharewa, da sake saita ACM
11. Sabunta na'urori - yi amfani da sabbin sabuntawar firmware zuwa ACM, da masu watsawa / masu karɓa
12. Sabunta Kalmar wucewa – sabunta bayanan sirri na Mai gudanarwa don samun dama ga ACM web- GUI
13. Fita - Fitar da Mai amfani / Mai Gudanarwa na yanzu

Web-GUI - Jawo & Sarrafa Sarrafa

Ana amfani da shafin Sarrafa Jawo & Drop don canza shigarwar tushen (Mai watsawa) cikin sauri da fahimta don kowane nuni (ko Duk) nuni (Mai karɓa). Za a sabunta yarjejeniyar suna na Transmitters da Receivers kamar yadda sunayen da aka sanya yayin daidaitawa, ko kuma kamar yadda aka sabunta a cikin shafukan watsawa ko mai karɓa.
Da zarar an daidaita tsarin shafin Jawo & Drop Control zai nuna duk samfuran Watsawa da Mai karɓa na kan layi. Duk samfuran Multicast za su nuna rafi mai aiki daga na'urar, wanda ke wartsake kowane 'yan daƙiƙa.
Saboda girman taga nunin akan wasu wayoyi, allunan ko kwamfyutocin tafi-da-gidanka, idan adadin masu watsawa da masu karɓa ya fi girman girman da ake samu akan allo, ana ba mai amfani ikon gungurawa / goge ta cikin na'urori masu samuwa (hagu zuwa dama) .

Don canza maɓuɓɓuka, danna kan tushen da ake buƙata / Mai watsawa, sa'an nan kuma ja gabanview zuwa ga mai karɓa kafinview.
Mai karɓa preview taga zai sabunta tare da rafi na tushen da aka zaɓa.
Maɓallin Jawo & Drop zai gyara rafi na Bidiyo/Audio daga Mai watsawa zuwa Mai karɓa, amma ba Kafaffen Rarraba siginar sarrafawa ba.
Ya kamata a nuna 'Babu sigina' a cikin presmitter preview taga, da fatan za a duba na'urar tushen HDMI tana kunne, tana fitar da sigina, kuma an haɗa ta ta kebul na HDMI zuwa Mai watsawa. Duba kuma saitunan EDID na na'urar watsawa suna aiki tare da tushen da ake amfani da su.
Ya kamata a nuna 'Babu sigina' a cikin preceiver preceiverview taga, duba naúrar tana haɗe kuma tana aiki daga cibiyar sadarwa (canzawa), kuma tana da ingantacciyar haɗi zuwa naúrar watsawa mai aiki.
Ya kamata a nuna 'Babu Nuni' a cikin preceiver preceiverview taga, duba nunin da aka haɗa yana da ƙarfi kuma yana da ingantaccen haɗin HDMI zuwa Mai karɓa.
Akwai taga 'Dukkan Masu karɓa' dake gefen hagu na taga masu karɓa. Jawo da sauke Transmitter akan wannan taga zai canza hanyar duk masu karɓa a cikin tsarin don kallon tushen da aka zaɓa. Ya kamata preview na wannan taga yana nuna alamar Blustream, wannan yana nuna cewa akwai cakuda hanyoyin da ake kallo a cikin masu karɓa a cikin tsarin. Bayanan da ke ƙarƙashin 'Duk Masu karɓa' za su nuna: 'TX: Daban' don nuna wannan.
Da fatan za a kula: shafin Jawo & Drop kuma shine shafin gida na mai amfani da Baƙi mai aiki na tsarin Multicast - tushen kawai wanda Baƙo ko Mai amfani ke da izini don view za a iya gani.
Ba a nuna masu karɓa a Yanayin bangon Bidiyo akan shafin Jawo & Sauke.

Web-GUI – Ikon bangon Bidiyo

Don taimakawa tare da sauƙaƙan ikon sauya bangon Bidiyo, akwai keɓan shafin Jawo & Rage Ikon Bidiyo. Wannan zaɓin menu yana samuwa ne kawai da zarar an saita bangon Bidiyo a cikin tsarin ACM / Multicast.

Tushen (Mai watsawa) preview Ana nuna windows a saman shafin tare da hoton bangon Bidiyo da aka nuna a ƙasa. Don canza tsarin bangon Bidiyo daga wannan tushe zuwa wani, Jawo & Jefa tushen kafinview taga uwa bangon Bidiyo preview kasa. Wannan zai canza duk allon da aka haɗa a cikin bangon Bidiyo (a cikin rukuni a cikin bangon Bidiyo kawai) zuwa tushen / Mai watsawa iri ɗaya a cikin Kanfigareshan da aka zaɓa a halin yanzu (a cikin rukuni). Ko Jawo & Zuba Mai watsawa kafinview kan allon 'Single' lokacin da tsararrun bangon Bidiyo ke cikin daidaitaccen tsarin allo.
Tsarin Multicast na Blustream na iya samun Ganuwar Bidiyo da yawa (IP2xxUHD, ko tsarin IP3xxUHD kawai). Zaɓin tsarin bangon Bidiyo na daban, ko don tura Tsarin Kanfigareshan / saiti na kowane bangon Bidiyo ana iya aiwatar da shi ta amfani da akwatunan saukar da sama da hoton bangon Bidiyo. Wannan wakilcin zane zai ɗaukaka ta atomatik yayin da kuke zaɓar bangon Bidiyo daban ko Kanfigareshan.
Idan allon da ke cikin bangon Bidiyo ya nuna akan nunin GUI 'RX Ba a sanya shi ba', wannan yana nufin bangon Bidiyo ba shi da sashin mai karɓa da aka sanya wa tsararru. Da fatan za a koma kan bangon Bidiyo da aka saita don sanya mai karɓa daidai.
Don ci-gaban umarnin API don sarrafa tsarin bangon Bidiyo a cikin tsarin, da fatan za a koma zuwa takaddar Umurnin API da ke akwai don saukewa daga Blustream. website.

Web-GUI - Preview

Da Preview fasalin shine hanya mai sauri zuwa view kafofin watsa labaru da ake gudana ta hanyar Multicast tsarin sau ɗaya an daidaita su. Preview rafi daga kowace na'urar tushen HDMI zuwa cikin Multicast Transmitter, ko rafi da kowane mai karɓa ke karɓa a cikin tsarin lokaci guda. Wannan yana taimakawa musamman don gyarawa da duba na'urorin tushen ana kunna su, da fitar da siginar HDMI, ko don duba matsayin I/O na tsarin:

Da Preview windows suna nuna allon kama kafofin watsa labarai wanda ke sabuntawa ta atomatik kowane ƴan daƙiƙa. Don zaɓar Mai watsawa ko Mai karɓa zuwa gabaview, Yi amfani da akwatin saukarwa don zaɓar Mai watsawa ko Mai karɓa zuwa gabaview.

Web-GUI - Takaitaccen aikin

Ƙarsheview na raka'o'in da aka saita a halin yanzu a cikin tsarin Multicast, ko don duba hanyar sadarwar don sababbin na'urori don sanyawa ga tsarin:

Zaɓuɓɓuka akan wannan shafin sun haɗa da:

1. Girman tsarin: kunna tsakanin: 0-75 Products, da 75+ Products.
2. Juya OSD: Kunna / Kashe OSD (Akan Nuni Allon). Juyawa OSD Kunna yana nuna lambar ID (watau ID 001) na Mai karɓar Multicast akan kowane nuni azaman mai rufi ga kafofin watsa labarai da ake rarrabawa. Juyawa OSD Kashe yana cire OSD.
3. Export Project: ƙirƙirar ajiya file (.json) don tsarin tsarin na yanzu.
4. Ayyukan Shigo: shigo da aikin da aka riga aka tsara zuwa tsarin na yanzu. Wannan yana da taimako musamman lokacin kafa tsarin na biyu ko faɗaɗa zuwa tsarin na yanzu a waje inda za'a iya haɗa tsarin biyu zuwa ɗaya.
5. Share Project: yana share aikin na yanzu.
6. Sanya Sabbin Na'urori: Sanya na'urorin da aka samo a cikin sashin Na'urorin da ba a sanya su ba (a kasan wannan shafin) zuwa tsarin na yanzu.
7. Ci gaba da Bincika & Sanya atomatik: ci gaba da bincika cibiyar sadarwar kuma sanya sabbin na'urorin Multicast ta atomatik zuwa ga ID na gaba da adireshin IP kamar yadda aka haɗa. Idan kawai haɗa sabon naúrar DAYA, yi amfani da zaɓin 'Scan Sau ɗaya' - ACM zai ci gaba da bincika hanyar sadarwar don sabbin na'urorin Multicast har sai an same su, ko sake zaɓi wannan maɓallin don dakatar da binciken.
8. Duba Sau ɗaya: duba hanyar sadarwar sau ɗaya don kowane sabon na'urorin Multicast da aka haɗa, sannan a gabatar da shi tare da buɗaɗɗen har zuwa ko dai sanya sabuwar na'urar da hannu, ko sanya sabuwar naúrar ta atomatik zuwa ID na gaba da adireshin IP na gaba kamar yadda aka haɗa.

Web-GUI - Masu watsawa

Shafin taƙaitaccen bayani ya ƙareview na duk na'urorin watsawa waɗanda aka saita a cikin tsarin, tare da ikon sabunta tsarin kamar yadda ake buƙata.

Siffofin shafi na taƙaitaccen bayani sun haɗa da:

1. ID - ana amfani da lambar ID (shigarwar) don sarrafa tsarin Multicast lokacin amfani da dandamali na sarrafawa na ɓangare na uku.
2. Suna - sunan da aka sanya wa Mai watsawa (yawanci na'urar da aka haɗe zuwa Mai watsawa).
3. Adireshin IP – adireshin IP da aka sanya wa Mai watsawa yayin daidaitawa.
4. Adireshin MAC - yana nuna adireshin MAC na Mai watsawa (LAN 1 tashar jiragen ruwa).
5. Dante MAC - yana nuna adireshin MAC na tashar LAN2 inda ake amfani da haɗin Dante mai zaman kansa. Da fatan za a duba maɓallin alamar Taimakon Yanayin Yanayin LAN2 don ƙarin bayani kan ware hanyoyin sadarwar Bidiyo da Dante.
6. Samfur - yana gano samfurin da ake amfani da shi wanda ke da alaƙa da tsarin.
7. Firmware – sigar firmware a halin yanzu an ɗora shi akan Mai watsawa. Don ƙarin bayani kan sabunta firmware, da fatan za a duba sashin 'Sabuntawa Firmware'.
8. Matsayi – yana nuna matsayin kan layi / kan layi na kowane Mai watsawa. Idan samfurin ya nuna azaman 'Kan layi', duba haɗin raka'a zuwa canjin hanyar sadarwa, saurin haɗi zuwa cibiyar sadarwa.
9. EDID - gyara ƙimar EDID don kowane Mai watsawa (tushen). Ana amfani da wannan don buƙatar takamaiman ƙudurin bidiyo da sauti don na'urar tushe don fitarwa. Za a iya samun taimako na asali akan zaɓin EDID ta danna maɓallin a saman shafin da aka yiwa alama 'Taimakon EDID'. Zaɓuɓɓukan EDID da ake amfani da su don IP50HD, IP2xxUHD, da tsarin IP3xxUHD duk sun bambanta.
10. HDMI Audio - yana zaɓar ko dai na asali HDMI audio, ko maye gurbin sautin da aka haɗa tare da shigar da sauti na analog na gida akan Mai watsawa. Saitin tsoho zai zama 'Auto'.
11. Yanayin LAN2: inda ake amfani da IP250UHD ko IP350UHD, yana yiwuwa a raba sauti na Dante don haɗawa zuwa cibiyar sadarwar Dante daban daga nan. Inda ake amfani da IP200UHD ko IP300UHD (babu haɗin Dante), wannan zaɓin ba zai yiwu ba. Duba teburin da ke ƙasa don zaɓin LAN (ba a samuwa akan firmware ACM don IP50HD)
12. Ayyuka – yana buɗe taga pop-up tare da saitunan saitin ci-gaba. Duba shafi na gaba don ƙarin bayani.
13. Sake wartsake - sabunta duk bayanan yanzu akan na'urorin da ke cikin tsarin.

Yanayin VLAN	PoE/Lan	2 RJ45	SFP
0 (tsoho)	VoIP + Dante	An kashe	VoIP + Dante
1	VoIP	Dante	An kashe
2	VolP/Dante	Bi tashar PoE/Lan	VoIP + Dante

Web-GUI - Masu watsawa - Ayyuka

Maɓallin 'Ayyuka' yana ba da damar ci gaba da fasalulluka na raka'a don samun dama da kuma daidaita su.
Suna - Ana iya gyara sunayen masu watsawa ta shigar da suna cikin akwatin rubutu na kyauta. Lura: wannan yana iyakance ga tsayin haruffa 16, kuma wasu haruffa na musamman ƙila ba za a iya tallafawa ba.
Ɗaukaka ID – Advanced Users Only – an saita ID na ɗaya (a matsayin tsoho) zuwa lamba ɗaya da lambobi 3 na ƙarshe na adireshin IP na raka'a watau Transmitter number 3 an sanya adireshin IP na 169.254.3.3 kuma zai sami ID na 3. Ba a ba da shawarar gyara ID na rukunin ba.
Girman Tsarin – Gyara girman tsarin kowane Mai watsawa
HDMI Audio - zaɓi tsakanin: Auto, HDMI, ko Analogue audio
Yanayin HDCP – zaɓi tsakanin: HDCP Kewaya, Ƙarfi 2.2, ko Ƙarfi 1.4
CEC Pass-ta (A Kunnawa / Kashe) - yana ba da damar CEC (Dokokin Lantarki na Mabukaci) don aikawa ta hanyar Multicast tsarin zuwa kuma daga na'urar tushen da aka haɗa da Mai watsawa. Lura: Dole ne a kunna CEC akan sashin mai karɓa kuma don aika umarnin CEC tsakanin. Saitin da aka saba don wannan fasalin ya kashe.
Nunin Panel na gaba (A Kunnawa / Kashe) - kunna / kashe nunin a gaban Mai watsawa. Nunin gaban panel na Multicast naúrar zai ƙare ta atomatik bayan daƙiƙa 90, kuma ya kashe. Latsa kowane maɓalli a gaban Mai watsawa don tada nuni idan a kashe.
Filashin wutar lantarki na gaban Panel (A kunne / Kashe / A kan daƙiƙa 90) - zai kunna wutar lantarki a gaban panel na Mai watsawa don taimakawa gano samfurin bin daidaitawar atomatik. Zaɓuɓɓuka sune: kunna hasken wutar lantarki ci gaba, ko kunna LED ɗin na tsawon daƙiƙa 90 kafin LED ɗin ya koma zama na dindindin. Lura: gaban panel LED's zai ƙare ta atomatik bayan 90 seconds tare da nunin gaban panel. Danna ɗaya daga cikin maɓallan CH don tada naúrar.
Kwafi EDID - duba shafi na gaba don ƙarin bayani kan 'Kwafi EDID'.
Saitunan Serial – kunna serial 'Yanayin Baƙi' kuma saita saitunan tashar tashar jiragen ruwa guda ɗaya don na'urar (watau Baud Rate, Parity da sauransu).
Preview - yana nuna taga mai bayyana tare da ɗaukar allo kai tsaye na na'urar tushen da aka haɗa da Transmitter.
Sake yi – sake kunna mai watsawa.
Sauya - ana amfani dashi don maye gurbin mai watsawa ta layi. Lura: Mai watsawa da za a musanya dole ne ya kasance a layi don amfani da wannan fasalin, kuma sabon Mai watsawa dole ne ya zama tsohuwar naúrar masana'anta tare da tsoho adireshin IP: 169.254.100.254.
Cire daga Project - yana cire na'urar watsawa daga aikin na yanzu.
Sake saitin masana'anta - yana mayar da mai watsawa zuwa saitunan tsoho na asali kuma ya saita adireshin IP zuwa: 169.254.100.254.

Web-GUI - Masu watsawa - Ayyuka - Kwafi EDID
EDID (Extended Display Identification Data) tsarin bayanai ne da ake amfani da shi tsakanin nuni da tushe. Ana amfani da wannan bayanan da tushen don gano menene ƙudurin sauti da bidiyo da nunin ke goyan bayan sa'an nan daga wannan bayanin tushen zai gano mafi kyawun ƙudurin sauti da bidiyo da ake buƙatar fitarwa.
Yayin da makasudin EDID shine sanya haɗin nuni na dijital zuwa tushen hanyar toshe-da-wasa mai sauƙi, al'amura na iya tasowa lokacin da aka gabatar da nuni da yawa, ko sauya matrix na bidiyo saboda ƙara yawan masu canji.
Ta hanyar tantance ƙudurin bidiyo da tsarin sauti na tushen da na'urar nuni za ku iya rage buƙatar lokaci don girgiza hannun EDID don haka yin sauyawa cikin sauri da aminci.
Aikin Kwafi na EDID yana ba da damar EDID na nuni don ɗauka da adana shi a cikin tsarin Multicast. Ana iya tunawa da tsarin EDID na allon a cikin zaɓin EDID na Mai watsawa. Ana iya amfani da nunin EDID akan kowace na'urar tushen da ba ta nunawa daidai akan allon da ake tambaya.
Ana ba da shawarar tabbatar da cewa kafofin watsa labarai daga Mai watsawa tare da EDID na al'ada suna nuni daidai akan sauran nunin a cikin tsarin.
Lura: yana da mahimmanci cewa allo ɗaya ne kawai viewing da Transmitter a lokacin da EDID Kwafin ya faru.

Web-GUI - Masu karɓa

Tagar taƙaitaccen mai karɓa yana nuna ƙarewaview na duk na'urorin Mai karɓa waɗanda aka saita a cikin tsarin, tare da ikon sabunta tsarin kamar yadda ake buƙata.

Siffofin shafin taƙaitaccen mai karɓa sun haɗa da:

1. ID - ana amfani da lambar ID (fitarwa) don sarrafa tsarin Multicast lokacin amfani da dandamali na sarrafawa na ɓangare na uku.
2. Suna - sunan masu karɓa (yawanci na'urar da ke haɗe zuwa mai karɓa) ana sanya su ta atomatik sunaye na asali watau Receiver 001 da dai sauransu. Ana iya gyara sunayen masu karɓa a cikin shafin Saita na'ura (a cikin Wizard), ko ta danna 'Ayyukan' maɓalli na ɗaya ɗaya (duba shafi na gaba).
3. Adireshin IP - adireshin IP da aka sanya wa mai karɓa yayin daidaitawa.
4. Adireshin MAC - yana nuna adireshin MAC na Mai karɓa (tashar LAN 1).
5. Dante MAC - yana nuna adireshin MAC na tashar LAN2 inda ake amfani da haɗin Dante mai zaman kansa. Da fatan za a duba maɓallin alamar Taimakon Yanayin Yanayin LAN2 don ƙarin bayani kan ware hanyoyin sadarwar Bidiyo da Dante.
6. Samfur - yana gano samfurin da ake amfani da shi wanda ke da alaƙa da tsarin.
7. Firmware – yana nuna sigar firmware da aka ɗora a kan Mai karɓa a halin yanzu. Don ƙarin bayani kan sabunta firmware, da fatan za a duba sashin 'Sabuntawa Firmware'.
8. Matsayi – yana nuna matsayin kan layi / kan layi na kowane Mai karɓa. Idan samfurin ya nuna a matsayin 'Kan layi', duba haɗin raka'a zuwa canjin hanyar sadarwa.
9. Tushen – yana nuna tushen yanzu da aka zaɓa a kowane Mai karɓa. Don canza zaɓin tushen, zaɓi sabon Mai watsawa daga zaɓin saukarwa.
10. Ƙimar Scaler – daidaita ƙudurin fitarwa ta amfani da ginanniyar sikelin bidiyo a cikin Mai karɓar Multicast. Ma'auni yana da ikon haɓakawa da ƙaddamar da siginar bidiyo mai shigowa. Za a iya samun taimako na asali akan zaɓin ma'auni ta danna maɓallin a saman shafin da aka yiwa alama 'Taimakon Ƙimar Ƙimar'. Samfurin ma'auni na fitarwa don IP50HD, IP2xxUHD, da tsarin IP3xxUHD duk sun bambanta.
11. Kunnawa/Kashe HDR - yana kunna daidaituwar HDR (High Dynamic Range) - kawai amfani da allon da ke goyan bayan HDR.
12. Aiki - yana gano Mai karɓa a matsayin samfur na tsaye (Matrix) ko azaman ɓangaren bangon Bidiyo. Wannan zaɓin yana yin launin toka lokacin da mai karɓa ba ya cikin tsararrun bangon Bidiyo.
13. Yanayin LAN2: inda ake amfani da IP250UHD ko IP350UHD, yana yiwuwa a raba sauti na Dante don haɗawa zuwa cibiyar sadarwar Dante daban daga nan. Inda ake amfani da IP200UHD ko IP300UHD (babu haɗin Dante), wannan zaɓin ba zai yiwu ba. Duba teburin da ya gabata (shafin TX) don zaɓin LAN (ba a samuwa akan firmware ACM don IP50HD) .
14. Ayyuka - duba shafi na gaba don ɓarna ƙarin zaɓuɓɓukan ayyuka.
15. Taimakon Ƙimar Ƙimar - za ku iya samun taimako na asali tare da zaɓin ƙira ta danna maɓallin a saman shafin da aka yiwa alama 'Taimakon Ƙimar'.
16. Sake sabuntawa - danna nan don sabunta duk bayanan yanzu akan na'urorin da ke cikin tsarin.

Web-GUI - Masu karɓa - Ayyuka

Maɓallin 'Ayyuka' yana ba da damar ci gaba da fasalulluka na Mai karɓa don samun dama da kuma daidaita su.
Suna - za a iya gyara ta ta shigar da suna cikin akwatin rubutu na kyauta.
Lura: wannan yana iyakance ga tsayin haruffa 16, kuma wasu haruffa na musamman ƙila ba za a iya tallafawa ba.
Ɗaukaka ID - an ƙirƙira ID ɗin zuwa lambobi 3 na ƙarshe na adireshin IP na na'urar watau Mai karɓa 3 an sanya adireshin IP na 169.254.6.3. Sabunta ID yana ba da damar ID / IP na rukunin don gyara.
Girman tsarin – gyara girman tsarin kowane mai karɓa.
Yanayin HDCP – zaɓi tsakanin: HDCP Kewaya, Ƙarfi 2.2, ko Ƙarfi 1.4.
Yanayin ARC - da fatan za a duba bayanin ARC a shafi na gaba.
Saurin Canjawa - yana canza bidiyo da farko, tare da sauti, IR, RS-232, USB / KVM duk sun canza bayan. Lura: yayin da ciyarwar bidiyo na iya canzawa da sauri, sauran sassan ciyarwar (watau audio, IR da sauransu) za su ɗauki ɗan lokaci kaɗan don kamawa.
CEC Pass-through (ON / KASHE) - yana ba da damar CEC (Dokokin Lantarki na Abokin Ciniki) don aika ta tsarin Multicast. Lura: Hakanan dole ne a kunna CEC akan Mai watsawa.
Fitowar Bidiyo (ON / KASHE) - yana kunna / KASHE fitarwar bidiyo na HDMI - yana buƙatar sabon musafaha yayin kunna baya.
Murfin Bidiyo (ON / KASHE) - yana kashe fitarwar HDMI (yana ƙirƙira allo baƙar fata), yana riƙe da musafaha na HDMI.
Dakatar Bidiyo (ON / KASHE) - dakatar da bidiyon HDMI da shigar da sauti a firam lokacin da aka ba da umarni. Kashewa yana ɗaukar ciyarwar HDMI daga wurin lokacin da aka ba da umarni.
Kunna Video Auto (ON / KASHE) - yana kashe fitowar bidiyo lokacin da ba a rarraba kafofin watsa labarai ba. Fitowar za ta kunna baya lokacin da aka fara watsa labarai.
Maɓallan Panel na gaba (ON / KASHE) - Maɓallan tashoshi a gaban kowane mai karɓa za a iya kashe su don dakatar da sauyawa maras so.
Panel na gaba IR (ON / KASHE) - yana ba da damar ko hana mai karɓa daga karɓar umarnin IR.
Akan Samfurin Allon (A kunne / Kashe / A kan 90 seconds) - Kunna / Kashe ID ɗin Samfurin Allon. Juya ID ɗin Samfur Akan Allon yana nuna ID (watau ID 001) na mai karɓa wanda aka lulluɓe akan nunin da aka haɗa.
Filashin wutar lantarki na gaban Panel (A Kunnawa / Kashe / A kan 90 seconds) - zai kunna wutar lantarki a gaban panel na mai karɓa don taimakawa gano na'urar.
Nuni Panel na gaba (A kunne / 90 seconds) - yi amfani da wannan don kunna / kashe nuni a gaban mai karɓa. Nunin na'urar zai ƙare bayan daƙiƙa 90 har sai an farka.
Juyawa – juya hoton ta: 0, 90, 180 da 270 digiri.
Stretch - yana sake girman hoton zuwa 'Stretch' zuwa bangaren nuni, ko 'Maintain Ratio' na fitowar na'urar tushen.
Saitunan Serial / Preview / Sake yi / Sauya / Cire daga Project / Factory Sake saitin - saituna iri ɗaya kamar yadda aka bayyana akan shafin watsawa a baya.

Web-GUI – Kafaffen Tafarkin Sigina

ACM yana da ikon ci gaba da sarrafa siginoni masu zuwa ta hanyar Multicast:

• Bidiyo
• Audio (Don Allah a lura: Ba a samun hanyar sarrafa sauti mai zaman kanta akan jerin IP50HD. ARC yana samuwa ne kawai akan tsarin IP300UHD da IP350UHD)
• Infrared (IR)
• Saukewa: RS-232
• Kebul / KVM
• CEC (Dokokin Lantarki na Masu amfani) - an kashe ta tsohuwa. Don kunnawa, da fatan za a yi haka a cikin shafin TX/RXAction kowace raka'a

Wannan yana ba da damar kowane sigina don daidaitawa daga samfurin Multicast ɗaya zuwa wani kuma daidaitaccen sauya bidiyo ba zai shafe shi ba. Wannan na iya zama da amfani ga IR, CEC ko RS-232 sarrafa samfurori a cikin filin ta amfani da tsarin Multicast don tsawaita umarnin sarrafawa daga bayani mai sarrafawa na ɓangare na uku, ko masana'antun IR na nesa.
Da fatan za a kula: ban da IR da RS-232, za a iya gyara hanyar zirga-zirga daga Mai karɓa zuwa samfur na Transmitter kawai. Ko da yake za a iya saita hanyar sadarwa ta hanya ɗaya kawai, sadarwar tana da shugabanci biyu tsakanin samfuran biyu.

Ta hanyar tsohuwa, hanyar: Bidiyo, Audio, IR, Serial, USB da CEC za su bi zaɓin Mai watsawa ta atomatik na sashin mai karɓa.
Don zaɓar kafaffen hanya, yi amfani da akwatin saukarwa don kowane sigina / masu karɓa don gyara hanya.
Da zarar an ƙara ACM cikin tsarin Multicast, ikon sarrafa ikon canza IR (ba IR pass-through) da maɓallin panel na gaba na Multicast Receivers ana kunna su ta tsohuwa. An kashe wannan daga ayyukan Ayyukan da ke ƙunshe a cikin shafin taƙaitaccen mai karɓa (duba shafi na baya).
Ana iya share hanyar tafiya ta hanyar zaɓar 'Bi' a kowane wuri daga cikin web- GUI. Ana iya samun ƙarin bayani game da Kafaffen Routing ta danna 'Taimakon Kafaffen Rutin'.
Don ci-gaban umarnin tuƙi don Bidiyo, Audio, IR, RS-232, USB da CEC lokacin amfani da tsarin sarrafawa na ɓangare na uku, da fatan za a koma zuwa keɓaɓɓen Takardun API (akwai don saukewa daga Blustream). websaiti).

Kafaffen Sauti Mai Sauƙi
ACM yana ba da damar ɓangaren sauti na siginar HDMI don a sarrafa kansa cikin tsarin Blustream Multicast. Karkashin aiki na yau da kullun za a rarraba sautin da ke cikin siginar HDMI tare da siginar bidiyo mai alaƙa daga Mai watsawa zuwa Mai karɓa/s.
Ƙaƙƙarfan ikon sarrafa sauti na ACM yana ba da damar waƙar mai jiwuwa daga tushe ɗaya don a saka shi zuwa wani rafin bidiyo na masu watsawa.

Kafaffen IR
Madaidaicin fasalin IR ɗin yana ba da damar kafaffen hanyar haɗin IR na bi-direction tsakanin samfuran Multicast 2x. Ana sarrafa siginar IR tsakanin daidaita RX zuwa TX, ko TX zuwa samfuran TX. Wannan na iya zama da amfani don aika IR daga wani yanki na tsakiya wanda ke da ikon sarrafawa (ELAN, Control4, Rti, Savant da dai sauransu) da kuma amfani da tsarin Blustream Multicast a matsayin hanyar ƙaddamar da IR zuwa nuni ko wani samfurin a cikin tsarin. Hanyar hanyar haɗin IR tana da shugabanci biyu don haka za'a iya mayar da ita akasin hanya a lokaci guda.

Haɗin kai:
Mai sarrafa na'ura na ɓangare na uku IR, ko mai karɓar Blustream IR, an haɗa shi da soket na IR RX akan Multicast Transmitter ko Mai karɓa.
Da fatan za a kula: Dole ne ku yi amfani da Blustream 5V IRR Receiver ko Blustream IRCAB (3.5mm sitiriyo zuwa mono 12V zuwa 5V IR Converter USB). Kayayyakin infrared na Blustream duk 5V ne kuma BA su dace da madadin masana'antun Infrared mafita ba.

An haɗa Blustream 5V IRE1 Emitter zuwa soket na IR OUT akan Multicast Transmitter ko Mai karɓa.
Blustream IRE1 & IRE2 Emitters an tsara su don sarrafa kayan aikin IR mai mahimmanci.
(IRE2 - Dual Eye Emitter wanda aka sayar daban)

Kafaffen kebul na USB / KVM
Madaidaicin fasalin kebul na kebul yana ba da damar kafaffen hanyar haɗin USB tsakanin Mai karɓar Multicast da Mai watsawa. Wannan na iya zama da amfani don aika siginar KVM tsakanin matsayi na masu amfani zuwa PC, uwar garken, CCTV DVR / NVR da dai sauransu.

Bayanin USB:

Kebul na Musammantawa	USB2.0 (a kula: baya goyan bayan cikakken adadin canja wurin bayanai na USB2.0)
Tsawaita	Sama da IP, Fasahar jujjuyawar Hybrid
Nisa	100m
Distance Ext.	ta hanyar tashar wutar lantarki ta Ethernet
Max Downstream Na'urorin	5
Topology	1 zu1 1 zuwa da yawa na musamman (USBoIP) 1 zuwa da yawa lokaci guda amma iyakataccen adadin na'urorin USB (USBoIP)* 1 zuwa da yawa a lokaci guda Keyboard / Mouse (K/MoIP)
USB R/W Aiki *	R: 69.6Mbps W: 62.4Mbps

* Maganar Alamar: Karanta / Rubuta USB zuwa SATA HD ba tare da tsarin Multicast R: 161.6 Mbps / W: 161.6 Mbps

Kafaffen Rarraba CEC
CEC ko Umurnin Lantarki na Abokin Ciniki shine ka'idar sarrafawa ta HDMI wanda ke ba da izinin aika umarni daga na'urar HDMI ɗaya zuwa wani don ayyuka masu sauƙi kamar: Power, Volume da sauransu.
Tsarin Multicast na Blustream yana ba da damar tashar CEC a cikin haɗin haɗin HDMI tsakanin samfuran biyu (tushen da nutsewa) don sadarwa tare da juna ta amfani da ka'idar CEC.
Dole ne a kunna CEC (wannan wani lokaci ana kiransa 'Sakon HDMI') akan duka na'urar tushen da na'urar nuni domin tsarin Multicast ya sadar da umarnin CEC akan hanyar haɗin Multicast.
Lura: tsarin Blustream Multicast zai jigilar ka'idar CEC kawai a bayyane. Yana da kyau a tabbatar cewa tushen da na'urorin nutsewa za su yi sadarwa yadda ya kamata kafin yin wannan nau'in sarrafawa tare da Multicast. Ya kamata a sami matsala tare da sadarwar CEC tsakanin tushen da nutsewa kai tsaye, wannan zai zama madubi lokacin aikawa ta tsarin Multicast.

ARC & Komawar Sauti na gani (IP300UHD & IP350UHD kawai)
Abubuwan IP300UHD da IP350UHD suna da ikon ɗaukar ko dai HDMI ARC, HDMI eARC, ko haɗin haɗin sauti na gani daga nunin da aka haɗa zuwa mai karɓa, kuma suna rarraba wannan baya zuwa fitowar gani a kan sashin watsawa da ke nesa a cikin tsarin. Lura, wannan fasalin baya samuwa akan kowane samfurin Multicst kuma yana iyakance ga max 5.1ch audio.
Ana sarrafa tsarin aikin dawo da sauti daga ƙasan Kafaffen Rubutun shafin na ACM210:

An kashe ARC ta tsohuwa. Ƙaddamar da ARC tsari ne na mataki 2:

1. Zaɓi hanyar ta amfani da akwatin saukarwa don haɗa mai watsawa zuwa mai karɓa
2. Kewaya zuwa shafin Mai karɓa na ACM, danna maɓallin Aiki don RX mai alaƙa da Mai watsawa. Zaɓi wace hanya mai jiwuwa ake amfani da ita daga ƙasa mai alamar "Yanayin ARC" (a kula: Dole ne a kunna CEC don HDMI ARC):

Web-GUI – Kanfigareshan bangon Bidiyo

Ana iya saita masu karɓar Multicast Multicast Blustream don zama ɓangare na tsararrun bangon Bidiyo a cikin ACM. Kowane tsarin Multicast zai iya ƙunsar har zuwa 9x Tsarin bangon Bidiyo na siffofi da girma dabam dabam. Ya bambanta daga 1 × 2 zuwa 9 × 9.

Don saita sabon tsarin bangon Bidiyo, kewaya zuwa menu na Kanfigareshan bangon Bidiyo kuma danna maɓallin da aka yiwa lakabin 'Sabon bangon Bidiyo' kamar yadda aka yiwa alama a saman allon. Taimako tare da ƙirƙirar tsararrun bangon Bidiyo za a iya samun ta ta danna maɓallin da aka yiwa alama 'Taimakon bangon Bidiyo'.
Da fatan za a kula: Multicast Receivers da za a yi amfani da su don bangon Bidiyo yakamata an saita su azaman masu karɓa ɗaya kafin a wuce wannan batu. Yana da kyau al'ada don riga an ba da suna Multicast Receivers don sauƙin daidaitawa watau "Bangaren Bidiyo 1 - Hagu Sama".

Shigar da bayanan da suka dace a cikin taga pop-up don suna kuma zaɓi adadin bangarori biyu a kwance da kuma a tsaye a cikin tsararrun bangon Bidiyo. Da zarar an saka madaidaicin bayanin akan allon, zaɓi 'Ƙirƙiri' don ƙirƙirar samfurin tsararrun bangon Bidiyo a cikin ACM.

Shafin menu na sabon tsarin bangon Bidiyo yana da zaɓuɓɓuka masu zuwa:

1. Komawa – yana komawa shafin da ya gabata don ƙirƙirar sabon bangon Bidiyo.
2. Sunan Ɗaukaka - gyara sunan da aka ba wa tsarin bangon Bidiyo.
3. Saitunan allo - daidaitawa na bezel / ramuwar ramukan allo da ake amfani da su. Duba shafi na gaba don ƙarin cikakkun bayanai akan saitunan Bezel.
4. Kanfigareshan Ƙungiya – akwai zaɓuɓɓuka don samun damar ƙirƙirar saiti da yawa (ko 'saitattun') don kowane tsarar bangon Bidiyo a cikin tsarin Multicast. Haɗin kai/saitaccen saiti yana ba da damar tura bangon Bidiyo ta hanyoyi da yawa watau haɗa lambobi daban-daban na fuska tare don ƙirƙirar bango daban-daban a cikin tsari guda ɗaya.
5. Juya OSD - Kunna / Kashe OSD (Akan Nuni Allon). Juyawa OSD Kunna zai nuna lambar ID (watau ID 001) na Mai karɓar Multicast akan kowane nuni da aka haɗa da mai karɓa azaman mai rufi ga kafofin watsa labarai da ake rarrabawa. Juyawa OSD Kashe yana cire OSD. Wannan yana ba da sauƙin gano nuni a cikin bangon Bidiyo yayin daidaitawa da saiti.

Nuni / Mai karɓa Ya Sanya:
ACM za ta ƙirƙiri wakilcin gani na bangon Bidiyo akan shafin. Yi amfani da kibiyoyi masu saukarwa don kowane allo don zaɓar samfurin Mai karɓar Multicast mai dacewa wanda aka haɗa zuwa kowane allo akan tsarar bangon Bidiyo.

Web-GUI – Kanfigareshan bangon Bidiyo – Saitunan bezel
Wannan shafin yana ba da damar diyya don girman kowane bezel na allo a cikin bangon Bidiyo, ko a madadin kowane gibi tsakanin fuska. Ta hanyar tsoho, tsarin Multicast zai shigar da bezels na bangon bangon Bidiyo "tsakanin" hoton gaba ɗaya (raba hoton). Wannan yana nufin cewa bezels na allon ba sa zama "a kan" kowane ɓangare na hoton. Ta hanyar daidaita Faɗin Wuta (OW) vs View Nisa (VW), da Tsawon Wuta (OH) vs View Tsayi (VH), za a iya daidaita bezels na allo don zama "a saman" hoton da ake nunawa.

Duk raka'a ta tsohuwa 1,000 - wannan lamba ce ta sabani. Ana ba da shawarar yin amfani da ma'auni na allon da ake amfani da su a mm. Don rama girman girman allo da ake amfani da shi, rage View Nisa kuma View Tsayi daidai don rama girman girman bezels. Da zarar an sami sakamakon gyare-gyaren da ake buƙata, ana iya amfani da maɓallin 'Kwafi Bezels zuwa Duk' don kwafi saitunan zuwa kowane nuni. Danna 'Sabuntawa' don tabbatar da saituna kuma komawa zuwa allon bangon Bidiyo na Ɗaukaka a baya.
Maɓallin 'Taimakon Bezel' yana buɗe taga mai buɗewa tare da jagora zuwa gyara da daidaita waɗannan saitunan.

Web-GUI – Kanfigareshan bangon Bidiyo – Mai tsara rukuni
Da zarar an ƙirƙiri tsararrun bangon Bidiyo, ana iya saita shi don zaɓuɓɓukan nuni daban-daban. Mai tsara bangon Bidiyo yana ba da damar ƙirƙira saitattu don tura bangon Bidiyo don daidaitawa ga ƙungiyoyin hotuna daban-daban a cikin jeri. Danna maɓallin 'Group Configurator' daga allon bangon Bidiyo na Sabuntawa.

Zaɓuɓɓuka a cikin wannan menu kamar haka:

1. Komawa - yana kewayawa zuwa shafin bangon Bidiyo na Sabuntawa ba tare da yin wani canje-canje ga saitin ba.
2. Zazzagewar Kanfigareshan – matsawa tsakanin saiti daban-daban / saitattun saiti don tsararrun bangon Bidiyo. Ta hanyar tsoho, za a saka 'Configuration 1' don ƙirƙirar bangon Bidiyo da kuma daidaita shi da farko.
3. Sunan Ɗaukaka – saita sunan daidaitawa / saiti watau 'Saiti guda ɗaya' ko 'Bangaren Bidiyo'. Ta hanyar tsoho, za a saita sunaye na sanyi / saiti azaman 'Configuration 1, 2, 3…' har sai an canza su.
4. Ƙara Kanfigareshan - yana ƙara sabon saiti / saiti don bangon Bidiyo da aka zaɓa.
5. Share – yana cire saitin da aka zaɓa a halin yanzu.

Sanya Rukuni:
Haɗin kai yana ba da damar tura bangon Bidiyo ta hanyoyi da yawa watau ƙirƙirar bangon Bidiyo daban-daban a cikin babban tsarin bangon Bidiyo. Yi amfani da zaɓin zaɓuka don kowane allo don ƙirƙirar ƙungiya a cikin bangon Bidiyo:

Dubi shafi na gaba don ƙarin bayani kan yadda babban tsarin bangon Bidiyo zai iya daidaita ƙungiyoyi masu yawa a ciki.
Web-GUI – Kanfigareshan bangon Bidiyo – Mai tsara rukuni
Don misaliample: Tsarin bangon Bidiyo na 3 × 3 na iya samun saiti / saiti masu yawa:

1. Don nuna rafukan kafofin watsa labaru daban-daban na 9x - ta yadda duk allo suyi aiki da kansu tare da kowane allo wanda ke nuna tushe guda - ba a haɗa su ba (bar duk abubuwan da aka saukar azaman 'Single').
2. A matsayin bangon Bidiyo na 3 × 3 - yana nuna rafin kafofin watsa labarai guda ɗaya a cikin dukkan fuska 9 (dukkan fuska yana buƙatar zaɓar 'Rukunin A').
3. Don nuna hoton bangon Bidiyo 2 × 2 a cikin jeri na bangon Bidiyo 3 × 3 gabaɗaya. Wannan na iya samun zaɓuɓɓukan 4x daban-daban:
   - Tare da 2 × 2 a saman hagu na 3 × 3, tare da allon mutum 5x zuwa dama da ƙasa (zaɓi 2 × 2 a saman hagu a matsayin rukunin A tare da sauran allon da aka saita azaman 'Single') - duba ex.ample kasa…
   – Tare da 2 × 2 a saman dama na 3 × 3, tare da 5x mutum fuska hagu da kasa (zaba 2×2 a saman dama a matsayin Group A tare da sauran fuska saita a matsayin 'Single').
   – Tare da 2 × 2 a cikin kasa hagu na 3 × 3, tare da 5x mutum fuska dama da kuma sama (zabi 2×2 a kasa hagu a matsayin Group A tare da sauran fuska saita a matsayin 'Single').
   – Tare da 2 × 2 a cikin kasa dama na 3 × 3, tare da 5x mutum fuska hagu da kuma sama (zabi 2×2 a kasa dama a matsayin Group A tare da sauran fuska saita a matsayin 'Single').

Tare da na sama exampDon haka, za a sami buƙatar ƙirƙirar gyare-gyare daban-daban guda 6 don tsararrun bangon Bidiyo, wanda ke ba da allo da aka haɗa zuwa rukuni ta amfani da zaɓin zaɓi. Za'a iya sake sanyawa Ƙungiyoyin Kanfigareshan / Ƙungiyoyin suna kamar yadda ake buƙata ta amfani da zaɓin 'Sabuntawa Suna' a cikin allon Kanfigareshan Ƙungiya.
Ana iya ƙirƙira ƙarin saiti tare da allo da aka sanya a matsayin ƙungiyoyi. Wannan yana ba da damar kafofin bidiyo da yawa su kasance viewed a lokaci guda kuma zai bayyana azaman bangon Bidiyo a cikin bangon Bidiyo. The kasa exampLe yana da bangon Bidiyo masu girman girman biyu daban-daban a cikin tsararru na 3 × 3. Wannan tsarin ya ƙunshi ƙungiyoyi biyu:

Web-GUI – Kanfigareshan bangon Bidiyo
Da zarar an ƙirƙiri bangon Bidiyo, an sanya suna daidai da haka, kuma an sanya ƙungiyoyi / saitattun saiti, ana iya daidaita bangon Bidiyo. viewed daga babban shafin Kanfigareshan bangon Bidiyo:

Saitunan saiti / saitattun da aka ƙera a cikin tsarin yanzu zasu bayyana a cikin shafin Rukunin bangon Bidiyo. Shafin Kanfigareshan bangon Bidiyo yana ba da damar kunna ƙungiya.
Maɓallin 'Refresh' yana sake sabunta shafin na yanzu da kuma daidaita tsarin bangon Bidiyo da ake nunawa a halin yanzu.
Wannan yana da taimako musamman lokacin gwada umarnin daidaita bangon Bidiyo daga tsarin sarrafawa na ɓangare na uku.
Da fatan za a duba ƙa'idodin API na ci gaba don amfani tare da tsarin sarrafawa na ɓangare na uku don sarrafa bangon Bidiyo, Canjin Kanfigareshan da zaɓin rukuni wanda ke akwai don saukewa daga Blustream. website.

Web-GUI - Masu amfani

ACM yana da damar masu amfani guda ɗaya don shiga cikin web-GUI na tsarin Multicast da samun dama ga sassa / yankuna na tsarin, don cikakken iko da tsarin Multicast gabaɗaya, ko don sauƙin sarrafa tushen abin da ake kallo a wurare da aka zaɓa kawai. Don taimako kafa sabbin Masu amfani, danna maballin da aka yiwa alama 'Taimakon Masu Amfani'.
Don saita sabon Mai amfani, danna 'Sabon Mai amfani' a saman allon:

Shigar da sabbin takaddun shaidar mai amfani a cikin taga da ke bayyana kuma danna 'Ƙirƙiri' da zarar an kammala:

Sabon Mai amfani zai bayyana a cikin shafin menu na Masu amfani a shirye don samun dama / izini don daidaitawa:

Don zaɓar izinin mai amfani ɗaya ɗaya, sabunta kalmar wucewar mai amfani, ko don cire mai amfani daga tsarin Multicast, danna maɓallin 'Ayyuka'.

Zaɓin Izinin yana ba da damar zaɓar waɗanne Masu watsawa ko masu karɓa mai amfani zasu iya gani a cikin shafukan sarrafa su (Jawo & Drop Control, da Kula da bangon Bidiyo). Tare da duk akwatunan da aka duba kusa da kowane Mai watsawa ko Mai karɓa, Mai amfani zai iya rigaview kuma canza a duk tsarin. Idan Mai amfani zai iya sarrafa allo / mai karɓa ɗaya kawai, sannan cire duk sauran masu karɓa. Hakazalika, idan ba za a ba mai amfani damar zuwa ɗaya (ko fiye) na'urorin tushe ba, waɗannan masu watsawa yakamata a cire su.
Inda akwai tsararrun bangon Bidiyo a cikin tsarin Multicast, Mai amfani zai buƙaci samun dama ga DUKAN masu karɓa masu alaƙa don samun ikon canza bangon Bidiyo. Idan mai amfani ba shi da damar yin amfani da duk masu karɓa, bangon Bidiyo ba zai bayyana a shafin Ikon bangon Bidiyo ba.

Da zarar an zaɓi izinin mai amfani, danna 'Update' don amfani da saitunan.
Da fatan za a kula: don dakatar da shiga mara tsaro web dubawa (watau ba tare da kalmar sirri ba), dole ne a share asusun 'Baƙo' bayan sabon mai amfani tare da samun dama ga maɓuɓɓuka / allon da ya dace. Ta wannan hanyar, ana buƙatar kowane Mai amfani da tsarin ya shigar da kalmar sirri don samun ikon sauya tsarin.

Web-GUI – Saituna

Shafin Saituna na ACM zai samar da ƙarewaview na saitunan gabaɗaya, da saitunan cibiyar sadarwa na sarrafawa / bidiyo na rukunin tare da ikon gyarawa da sabunta sashin daidai.

The 'Clear Project' yana cire duk masu watsawa, masu karɓa, bangon bidiyo da masu amfani waɗanda aka ƙirƙira daga aikin na yanzu. file dauke a cikin ACM. Tabbatar da zaɓi 'Ee'.
Da fatan za a lura: Mayen Saitin Sabon Project zai bayyana bayan amfani da aikin 'Clear Project'. Ya kamata a ajiye aikin file ba a halicce su ba kafin share aikin, ba zai yiwu a mayar da tsarin ba bayan wannan batu.

Zaɓin 'Sake saitin ACMxxx' yana ba da damar masu zuwa:

1. Sake saita tsarin zuwa tsohuwar masana'anta (ban da saitunan hanyar sadarwa)
2. Sake saita hanyar sadarwa zuwa saitunan tsoho (ban da saitunan tsarin)
3. Sake saita DUKAN Tsarin da saitunan hanyar sadarwa baya zuwa tsohuwar masana'anta

Ƙarƙashin saitunan gabaɗaya, zaɓin 'Update' yana ba da izini ga masu zuwa:

1. Kunna / Kashe ikon IR don kunna / musaki shigar da IR na ACM daga karɓar umarnin IR daga maganin sarrafa ɓangare na uku.
2. Sabunta lambar tashar tashar Telnet wanda tashar sarrafawa ta ACM ke sadarwa ta hanyar. Tsohuwar lambar tashar tashar da aka yi amfani da ita ita ce tashar jiragen ruwa 23 wacce za a yi amfani da ita don duk direbobin sarrafa na ɓangare na uku na Blustream.
3. Sabunta ƙimar RS-232 Baud na haɗin DB9 na ACM don dacewa da na'ura mai sarrafa ɓangare na uku. Tsohuwar ƙimar Baud da aka yi amfani da ita ita ce: 57600.

Ana iya sabunta adiresoshin IP na tashoshin RJ45 guda biyu akan ACM tare da adiresoshin IP, Subnet da Adireshin Ƙofa. Yi amfani da maɓallin 'Update' don ko dai Control Network ko Video Network don sabunta bayanan tashoshin da ake buƙata. Za a iya saita tashar tashar sarrafawa zuwa DHCP ta zaɓi 'A kunne':

MUHIMMI: Gyara Adireshin IP na hanyar sadarwa na Bidiyo daga kewayon 169.254.xx zai dakatar da sadarwa tsakanin ACM da Multicast Transmitters da Receivers waɗanda aka riga aka tsara su. Yayin da za a iya fitar da ACM daga kewayon da aka ba da shawarar, adiresoshin IP na DUKAN masu watsawa da masu karɓa zasu buƙaci a gyara su zuwa kewayon IP iri ɗaya don tabbatar da haɗin kai da sarrafa tsarin Multicast. Ba a ba da shawarar ba.

Web-GUI - Sabunta Firmware

Shafin Sabunta Firmware yana ba da damar sabunta firmware na:

• Farashin ACM
• Multicast Transmitter da Raka'a mai karɓa

Da fatan za a kula: fakitin firmware don ACM, Multicast Transmitter da samfuran karɓa ɗaya ne. Ana ba da shawarar cewa an kammala sabunta firmware daga kwamfutar tafi-da-gidanka ko kwamfutar tafi-da-gidanka wanda ke da ƙarfi a cikin hanyar sadarwa.
Ana ɗaukaka ACM:
Zazzage Firmware ACMxxx file (.bin/.img) daga Blustream webshafin zuwa kwamfutarka.

Danna maɓallin da aka yiwa alama 'Upload ACMxxx Firmware'

Zaɓi [ACMxxx].bin/.img file An riga an sauke zuwa kwamfutarka don ACM. The file za ta atomatik loda zuwa ACM wanda ke ɗaukar tsakanin mintuna 2-5 don kammalawa. Shafin yana wartsakewa zuwa Jawo & Ajiye shafin da zarar an kammala.

Hakanan ana amfani da shafin Sabunta Firmware don haɓaka firmware na Blustream Transmitters ko Receivers.
Shafin yana ba da damar haɓaka raka'o'in masu karɓa da yawa (watau duk masu karɓa lokaci ɗaya, ko, duk masu watsawa lokaci ɗaya - ba duka a lokaci ɗaya ba).
Mafi na yanzu firmware version na Multicast Transmitters da Receivers za a iya sauke daga Blustream website.

Don loda firmware files, danna maɓallin da aka yiwa alama 'Upload TX ko RX Firmware', sannan 'Zaɓa Files'. Da zarar firmware daidai (.bin) file An zaɓi daga kwamfutar, firmware zai loda zuwa ACM.
Lura: wannan ɓangaren haɓakawa baya loda firmware cikin raka'a TX ko RX, yana lodawa kawai zuwa ACM ɗin da aka shirya don turawa zuwa TX ko RX.

MUHIMMI: Kar a rufe ko kewayawa daga lodawa yayin da ake ci gaba don guje wa ɓacewar bayanan firmware yayin canja wuri zuwa ACM.
Bayan kammala firmware files ana lodawa zuwa ACM, sanarwa za ta bayyana akan allo don amsa nasarar ƙaddamarwa.
Don kammala haɓaka firmware na ko dai Multicast Transmitter, ko don raka'o'in Mai karɓa, danna maɓallin da aka yiwa alama 'Update' kusa da abin da ya dace Transmitter ko Receiver.
Da fatan za a kula: yana yiwuwa ne kawai a sabunta masu watsawa, ko masu karɓa a lokaci ɗaya (IP200UHD / IP250UHD / IP300UHD / IP350UHD). Don IP50HD, ana iya fitar da sabuntawar firmware zuwa raka'o'in TX ko RX da yawa a lokaci guda.
Za mu ba da shawarar kasancewa mai ƙarfi a koyaushe zuwa hanyar sadarwar lokacin da firmware ke sabunta raka'a don rage haɗarin sadarwa akan haɗin kai mara waya.

MUHIMMI: Kar a cire haɗin raka'o'in ACM ko TX/RX yayin da ake ci gaba da haɓakawa don guje wa ɓacewar bayanan firmware yayin canja wuri zuwa na'urorin Mai watsawa / Mai karɓa.

Sabunta kalmar wucewa

Ana iya sabunta kalmar sirrin Admin na ACM zuwa kalmar sirri na lamba-alpha ta saka sabbin takaddun shaida a cikin wannan zaɓin menu na faɗowa. Danna 'Update Password' don tabbatarwa:

MUHIMMI: Da zarar an canza kalmar sirri ta Admin, Mai amfani ba zai iya dawo da shi ba. Idan an manta kalmar sirrin Admin ko batacce, da fatan za a tuntuɓi memba na ƙungiyar Tallafin Fasaha na Blustream wanda zai iya taimakawa wajen dawo da haƙƙin Admin na sashin. Duba adiresoshin imel a ƙasa:

RS-232 (Serial).

Tsarin Multicast yana da hanyoyi guda biyu na sarrafa siginar umarni na RS-232:
Nau'in 1 - Kafaffen Hanyar Hanya:
Tsayayyen hanya madaidaiciya don rarraba umarni biyu na RS-232 tsakanin Mai watsawa Multicast zuwa masu karɓa da yawa (Kafaffen Routing). Za a iya barin ƙayyadaddun hanyar sadarwa a tsaye tsakanin samfura biyu ko fiye a matsayin haɗin kai na dindindin don canja wurin bayanan sarrafawar RS-232, ana saita wannan ta amfani da Kafaffen Rarraba menu na ACM.
Nau'in 2 - Yanayin Baƙi:
Yana ba da damar haɗin RS-232 na na'ura don aika akan hanyar sadarwar IP (umarni IP / RS-232, zuwa RS-232 fita). Nau'in Yanayin Baƙi na 2 yana ba da tsarin sarrafawa na ɓangare na uku ikon aika umarnin RS-232 ko IP zuwa ACM da umarnin RS-232 don aika daga mai karɓa ko Mai watsawa a sakamakon haka. Wannan IP zuwa siginar RS-232, yana ba da damar tsarin sarrafawa na ɓangare na uku don samun iko da yawancin na'urorin RS-232 kamar yadda akwai masu karɓa da masu aikawa, daga haɗin cibiyar sadarwa zuwa ACM.
Akwai hanyoyi guda biyu na kunna Nau'in 2 - Yanayin Baƙi:

1. Yin amfani da ACM web-GUI daga shafuka masu watsawa da Ayyukan Mai karɓa.
2. Ta hanyar umarnin da aka saita kamar yadda cikakken bayani a ƙasa. Umarnin don saita haɗin shine: IN/OUT xxx SG ON

Haɗin Yanayin Baƙi na RS-232 daga Tsarin Gudanarwa na ɓangare na uku:
Lokacin amfani da Yanayin Baƙi akan na'urori da yawa a cikin tsarin, za mu ba da shawarar kunna da kashe Yanayin Baƙi lokacin da ake buƙata. Wannan saboda jerin umarni da ake aika zuwa cikin ACM za a wuce zuwa DUKAN na'urorin da ke kunna Yanayin Baƙi.

1. Don buɗe hanyar haɗin Baƙi tsakanin ACM da IPxxxUHD-TX ko naúrar RX dole ne a aika umarni mai zuwa ta IP ko RS-232:
   

   INxxxGUEST	Haɗa zuwa TX xxx a Yanayin Baƙi daga ACM
   OUTxxxGUEST	Haɗa zuwa RX xxx a Yanayin Baƙi daga ACM
   Exampda:	Transmitter goma shine ID 010, ma'ana 'IN010GUEST' zai ba da izinin aika umarni na Serial / IP tsakanin ACM da Transmitter 10.

2. Da zarar an kafa haɗin kai, duk wani haruffan da aka aika daga ACM za a aika su zuwa mai haɗawa ko mai karɓa, kuma akasin haka.
3. Don rufe haɗin kai aika umarni: KUSANCI

Ƙayyadaddun bayanai

ACM200 & ACM210:

• Ethernet tashar jiragen ruwa: 2x LAN RJ45 mai haɗawa (1x PoE goyon bayan)
• RS-232 tashar tashar jiragen ruwa: 1x DB-9 mace
• RS-232 & I/O tashar jiragen ruwa: 1x 6-pin Phoenix connector (an ajiye don amfani nan gaba)
• IR shigarwa tashar jiragen ruwa: 1 x 3.5mm jack sitiriyo
• Girma (W x D x H): 96mm x 110mm x 26mm
• Nauyin jigilar kaya (Kit): 0.6kg
• Yanayin aiki: 32°F zuwa 104°F (0°C zuwa 40°C)
• Zafin ajiya: -4°F zuwa 140°F (-20°C zuwa 60°C)

Abubuwan Kunshin

• 1 x ACM200 / ACM210
• 1 x kebul na sarrafa IR - 3.5mm zuwa 3.5mm sitiriyo zuwa kebul na mono
• 1 x 6-pin mai haɗin phoenix
• 1 x Kit ɗin hawa

Kulawa

Tsaftace wannan naúrar da busasshiyar kyalle mai laushi. Kada a taɓa amfani da barasa, fenti mai sirara ko benzene don tsaftace wannan rukunin.

Dokokin Infrared Blustream
Blustream sun ƙirƙiri shigarwar 16x & 16x fitarwa umarnin IR wanda ke ba da damar zaɓin tushen har zuwa 16x masu watsawa zuwa masu karɓa na 16x. Waɗannan sun bambanta da ikon canza tushen tushen da aka aika zuwa Mai karɓar Multicast.
Don tsarin da ya fi girma fiye da na'urorin tushen 16x, da fatan za a yi amfani da RS-232 ko sarrafa TCP/IP.
Don cikakkun bayanai na umarnin Multicast IR, da fatan za a ziyarci Blustream webshafin yanar gizon kowane samfurin Multicast, danna maɓallin "Drivers & Protocols", kuma kewaya zuwa babban fayil mai suna "Multicast IR Control".

RS-232 da Telnet Commands

Ana iya sarrafa tsarin Blustream Multicast ta hanyar serial da TCP/IP. Da fatan za a koma zuwa shafin haɗin yanar gizon RS-232 zuwa farkon wannan jagorar don saiti da fiddawa. Don ACM200 da ACM210, akwai daidaitattun Takardun API don saukewa daga Blustream. webrukunin yanar gizon da ke rufe duk yuwuwar umarni waɗanda za a iya aikawa ta hanyar TCP/IP ko Serial zuwa raka'a.
Kuskuren gama gari

• Komawar ɗaukar kaya - Wasu shirye-shirye basa buƙatar dawowar karusar inda wasu ba za su yi aiki ba sai an aika kai tsaye bayan kirtani. A cikin yanayin wasu software na Terminal alamar ana amfani da shi don aiwatar da dawo da kaya. Dangane da shirin da kuke amfani da wannan alamar watakila ya bambanta. Wasu exampKada sauran tsarin sarrafawa da aka tura sun haɗa da \r ko 0D (a cikin hex).
• Wurare - ACM200 na iya aiki tare da mu ba tare da sarari ba. Kawai yayi watsi dasu. Hakanan yana iya aiki da lambobi 0 zuwa 4. misali: 1 daidai yake da 01, 001, 0001
  - Yadda zaren ya kamata ya kasance kamar haka OUT001FR002
  - Yadda zaren zai iya kama idan sararin samaniya yana buƙatar tsarin sarrafawa: OUT{Space}001{Space}FR002
• Baud Rate ko wasu saitunan ladabi ba daidai ba

Da fatan za a kula: Matsakaicin adadin masu watsawa (yyy) da masu karɓa (xxx) = na'urori 762 (001-762)
– Masu karɓa (fitarwa) = xxx
– Masu watsawa (shigarwa) = yy
– Fitowar Scaler = rr
– Saitunan shigar da EDID = zz
– Baud Rate = br
– GPIO shigarwa/mashigai fitarwa = gg

Don cikakken jerin duk umarnin API na ACM200 da ACM210, da fatan za a duba takaddar API ɗin Babban Sarrafa Maɗaukaki da aka buga akan Blustream. website.

Ra'ayin matsayi samples
Umurni: MATSAYI
Ra'ayin STATUS yana ba da ƙarewaview na cibiyar sadarwa an haɗa ACM zuwa:
=================================== ===========
Akwatin Kula da IP ACM200 Bayanin Matsayi
Shafin FW: 1.14
Power IR Baud
Farashin 57600
A cikin EDID IP NET/Sig
001 DF009 169.254.003.001 Kunna / Kunnawa
002 DF016 169.254.003.002 Kunna / Kunnawa
Fita DagaIn IP NET/HDMI Res Yanayin
001 001 169.254.006.001 Kunna / Kashe 00 VW02
002 002 169.254.006.002 Kunna / Kashe 00 VW02
LAN DHCP IP Gateway SubnetMask
01_POE Kashe 169.254.002.225 169.254.002.001 255.255.000.000
02_CTRL Kashe 010.000.000.225 010.000.000.001 255.255.000.000
Saukewa: LAN01 MAC LAN02
0023 34:D0:B8:20:4E:19 34:D0:B8:20:4E:1A
=================================== ===========
Umurni: FITA xxx MATSAYI
Bayanin OUT xxx MATSAYI yana ba da ƙarewaview na fitarwa (Mai karɓa: xxx). Ciki har da: firmware, yanayin, kafaffen kwatance, suna da sauransu.
=================================== ===========
Akwatin Kula da IP ACM200 Bayanin Fitarwa
Shafin FW: 1.14
Fita Sunan Mai Juya Halin HPD Ver Mode
001 A Kashe A7.3.0 VW 00 0 Mai karɓa 001
Mai Saurin Fr Vid/Aud/IR_/Ser/USB/CEC HDR MCas
A kan 001 001/004/000/000/002/000 Kunna
CEC DBG Stretch IR BTN LED SGEn/Br/Bit
Kunnawa Akan 3 Kashe /9/8n1
IM MAC
Static 00:19:FA:00:59:3F
IP GW SM
169.254.006.001 169.254.006.001 255.255.000.000
=================================== ===========
Ra'ayin matsayi samples
Umurni: IN xxx MATSAYI
An wuceview na shigarwar (Mai watsawa: xxx). Ciki har da: firmware, audio, suna da dai sauransu.
=================================== ===========
Akwatin Kula da IP ACM200 Bayanin shigarwar
Shafin FW: 1.14
A cikin Net Sig Ver EDID Aud MCast Name
001 Akan A7.3.0 DF015 HDMI Akan Mai watsawa 001
CEC LED SGEn/Br/Bit
Kashe 3 / 9/8n1
IM MAC
Static 00:19:FA:00:58:23
IP GW SM
169.254.003.001 169.254.003.001 255.255.000.000
=================================== ===========
Umurni: VW MATSAYI
MATSAYIN VW zai nuna duk bayanin matsayin VW don tsararrun bangon Bidiyo a cikin tsarin. Ƙarin tsararrun bangon Bidiyo za su sami ra'ayin matsayin mutum ɗaya watau 'MATSAYIN VW 2'.
=================================== ===========
Akwatin Kula da IP ACM200 Bayanin bangon Bidiyo
Shafin FW: 1.14
Sunan VW Col Row CfgSel
02 02 02 02 bangon Bidiyo 2
OutID
001 002 003 004
Sunan mahaifi CFG
01 Tsari 1
Rukuni Daga In Screen
A 004 H01V01 H02V01 H01V02 H02V02
02 Tsari 2
Rukuni Daga In Screen
Hoton 002H02V01H02V02
Saukewa: B001H01V01H01V02
=================================== ===========

Shirya matsala ACM

Gwada amfani da umarnin da ke ƙasa don gwada ACM ya kamata a fuskanci matsaloli yayin amfani da kwamfuta don sarrafa ACM.

1. Haɗa kwamfutar kai tsaye zuwa tashar jiragen ruwa na ACM tare da kebul na CAT
2. Dole ne kwamfutar ta kasance cikin kewayo ɗaya da haɗin haɗin LAN 1 akan na'urar ACM (CONTROL network) saboda wannan zai kwaikwayi sarrafawa daga tsarin sarrafawa na ɓangare na uku (watau Control4, RTI, ELAN da sauransu). Da fatan za a duba umarni a bayan wannan jagorar don 'Canza bayanan IP na kwamfutarka'.
3. Bude shirin cmd.exe (Command prompt). Yi amfani da kayan aikin bincike na kwamfutar idan ba ku da tabbacin inda wannan yake.
4. Shigar da layin umarni mai zuwa 'Telnet 192.168.0.225'
   Za a nuna taga mai zuwa don tabbatar da shiga cikin ACM cikin nasara:

Kuskuren Telnet
Idan saƙon kuskuren:' telnet ba a gane shi azaman umarni na ciki ko na waje, shirin mai aiki ko tsari file', kunna Telnet akan kwamfutarka.
Rashin ganin tashoshin LAN na ACM
Idan ba za a iya sadarwa (ping) tashoshin jiragen ruwa na ACM ba, haɗa kai tsaye zuwa canjin hanyar sadarwa ba ta hanyar hanyar sadarwa ta DHCP ba don gwadawa.
Iya yin ping samfurin amma ba shiga ta hanyar haɗin Telnet ba
Idan ba za a iya sadarwa (ping) tashoshin jiragen ruwa na ACM ba, haɗa kai tsaye zuwa canjin hanyar sadarwa ba ta hanyar hanyar sadarwa ta DHCP ba don gwadawa.

Daidaita Saitunan Kwamfutarka - Kunna TFTP & Telnet

Kafin amfani da shirin sabunta PC na Blustream ACM Firmware dole ne ka kunna fasalin TFTP da Telnet a kan kwamfutarka. Ana samun wannan ta amfani da matakan da ke ƙasa:

1. A cikin Windows, kewaya zuwa Fara -> Control Panel -> Shirye-shirye da Features
2. A cikin allon Shirye-shirye da Features, zaɓi Kunna ko kashe fasalin Windows a mashigin kewayawa na hagu.
3. Da zarar taga Features na Windows, gungura ƙasa kuma tabbatar da cewa "abokin ciniki na TFTP" da "Telnet Client" duka an zaɓi su.
4. Da zarar sandar ci gaba ta cika kuma buguwar tashi ta ɓace, ana kunna abokin ciniki na TFTP.

Saita kafaffen adireshin IP a cikin Windows 7, 8, 10 ko 11
Domin sadarwa tare da ACM dole ne kwamfutarka ta fara zama a cikin kewayon IP iri ɗaya da tashoshin ACM Control ko Video LAN. Ta hanyar tsoho tashar jiragen ruwa suna da adireshin IP mai zuwa:

Sarrafa tashar LAN	192.168.0.225
Video LAN tashar jiragen ruwa	169.254.1.253

Umurnai masu zuwa suna ba ku damar canza adireshin IP na kwamfutarka da hannu yana ba ku damar sadarwa tare da samfuran Blustream Multicast.

1. A cikin Windows, rubuta 'cibiyar sadarwa da rabawa' a cikin akwatin bincike
2. Lokacin da Network and Sharing allon ya buɗe, danna kan 'Change Adapter settings'.
3. Dama danna adaftar Ethernet ɗin ku kuma danna Properties
4. A cikin taga Haɗin Haɗin Yanki na Local Area yana haskaka sigar Intanet Protocol Version 4 (TCP/IPv4) sannan danna maɓallin Properties.
5. Zaɓi maɓallin rediyo Yi amfani da adireshin IP mai zuwa kuma shigar da IP daidai, Mashin Subnet, da Ƙofar Tsohuwar da ta yi daidai da saitin cibiyar sadarwar ku.
6. Danna Ok kuma rufe daga duk allon cibiyar sadarwa. Adireshin IP ɗin ku yanzu an gyara shi.

Bayanan kula…

www.blustream.co.uk
www.blustream.com.au
www.blustream-us.com

Takardu / Albarkatu

BLUSTREAM ACM200 Multicast Advanced Control Module [pdf] Manual mai amfani ACM200 Multicast Advanced Control Module, ACM200, Multicast Advanced Control Module, Advanced Control Module, Sarrafa Module, Module

Magana

• Manual mai amfani