Blustream Multicast ACM200 / ACM210
Advanced Control Module
Bukana ea MosebelisiPhetolelo ea 1.3 - Phato 2023

Kea leboha ha u rekile sehlahisoa sena sa Blustream
Bakeng sa tshebetso e ntlafetseng le polokeho, ka kopo bala ditaelo tsena ka hloko pele o hokela, o sebedisa kapa o lokisa sehlahiswa sena. Ka kopo boloka bukana ena bakeng sa tšebeliso ea nako e tlang.
Sesebelisoa sa ts'ireletso ea surge se khothalelitsoe
Sehlahisoa sena se na le likarolo tsa motlakase tse ka 'nang tsa senngoa ke li-spikes tsa motlakase, li-surges, ho ts'oaroa ha motlakase, ho otla ha lehalima, joalo-joalo. Ho khothaletsoa haholo ho sebelisa lisebelisoa tsa tšireletso ho sireletsa le ho lelefatsa bophelo ba lisebelisoa tsa hau. Tsebiso ea polokeho le ts'ebetso
Se ke oa kenya sebaka kapa oa sebelisa phepelo e 'ngoe ea motlakase ntle le lihlahisoa tse lumelletsoeng tsa marang-rang tsa PoE kapa lisebelisoa tse lumelletsoeng tsa motlakase tsa Blustream.
Se ke oa arola yuniti ea ACM200 / ACM210 ka lebaka lefe kapa lefe. Ho etsa joalo ho tla hlakola waranti ea moetsi.

Selelekela

Sethala sa rona sa kabo ea Multicast se lumella ho ajoa ha video ea HDMI holim'a sesebelisoa sa marang-rang se laoloang. ACM200 & ACM210 Advanced Control Modules (tse tsejoang e le 'ACM' ho tloha ntlheng ena ho ea pele ho tataiso ena) e lumella taolo e tsoetseng pele ea mokha oa boraro oa tsamaiso ea Blustream Multicast e sebelisang TCP / IP, RS-232 le IR.
ACM e kenyelletsa a web segokanyimmediamentsi sa sebolokigolo bakeng sa taolo le tlhophiso ea sistimi ea Multicast le likarolo tsa khetho ea mohloli oa 'Drag & Drop' ka media pele.view le tsamaiso e ikemetseng ea Video, Audio (eseng ho IP50HD systems), IR, RS232, le USB / KVM. Bakhanni ba lihlahisoa tsa Blustream tse hahiloeng esale pele ba nolofatsa ho kenya lihlahisoa tsa Multicast le ho hlokomoloha tlhokahalo ea kutloisiso ea mekhoa e rarahaneng ea marang-rang.
Tataiso ena ea mosebelisi e akaretsa likarolo le ts'ebetso bakeng sa lihlahisoa tsa ACM200 le ACM210 Advanced Control Module tse tsoang Blustream.
ACM200 hajoale e sebelisoa bakeng sa litsamaiso tsa IP50HD, IP200UHD le IP250UHD feela.
ACM210 e ka sebelisoa bakeng sa mekhoa ea IP50HD, IP200UHD, IP250UHD, IP300UHD le IP350UHD ka bomong.
Ka kopo hlokomela: Litsamaiso tsa IP200UHD le IP250UHD lia sebelisana. Litsamaiso tsa IP300UHD le IP350UHD lia sebelisana.
IP50HD ke sistimi e ikemetseng 'me ha e sebelisane le e' ngoe ea lihlopha tse 2 tse ka holimo tsa litsamaiso tsa Multciast.

Likaroloana

• Web segokanyimmediamentsi sa sebolokigolo bakeng sa tlhophiso le taolo ea Blustream Multicast tsamaiso
• Khetho ea mohloli oa 'Drag & Drop' e hlakileng ka video peleview tšobotsi bakeng sa tlhokomelo e sebetsang ea boemo ba tsamaiso
• Tsamaiso e tsoetseng pele ea lipontšo bakeng sa tsamaiso e ikemetseng ea Video, Audio, IR, RS-232, le USB/KVM
• Tokiso ea sistimi e ikemetseng
• Likhokahano tsa 2x RJ45 LAN ho hokahanya marang-rang a teng ho netweke ea kabo ea livideo ea Multicast, e bakang:
  - Ts'ebetso e ntle ea sistimi ha sephethe-phethe sa marang-rang se arohane
  - Ha ho hlokahale ho seta marang-rang a tsoetseng pele
  - Aterese ea IP e ikemetseng ka khokahano ea LAN
  - E lumella taolo e nolofalitsoeng ea TCP / IP ea sistimi ea Multicast
• Khokahano ea RS-232 bakeng sa taolo ea sistimi ea Multicast
• Khokahano ea IR bakeng sa taolo ea sistimi ea Multicast
• PoE (Matla holim'a Ethernet) ho matlafatsa ACM ho tloha ho PoE switch
• Motlakase oa lehae oa 12V (ka boikhethelo) ha oa lokela ho fetoha o se ke oa tšehetsa PoE
• Ts'ehetso bakeng sa taolo ea iOS le Android App (batla: "Hula le ho Lahlela Taolo")
• Bakhanni ba mokha oa boraro ba fumaneha bakeng sa mefuta e mengata ea taolo

Keletso ea Bohlokoa:
The Blustream Multicast system e aba video ea HDMI holim'a lisebelisoa tsa marang-rang tse laoloang. Ho eletsoa hore lihlahisoa tsa Blustream Multicast li hokahane le sesebelisoa se ikemetseng sa marang-rang (kapa VLAN) ho thibela ho kena-kenana ho sa hlokahaleng, kapa ho fokotsa ts'ebetso ea matšoao ka lebaka la litlhoko tse ling tsa marang-rang a marang-rang.
Ka kopo bala le ho utloisisa litaelo tse bukeng ena 'me u netefatse hore sesebelisoa sa marang-rang se lokisoa ka nepo pele o hokela lihlahisoa life kapa life tsa Blustream Multicast. Ho hloleha ho etsa joalo ho tla baka mathata mabapi le tlhophiso ea sistimi le ts'ebetso ea video.

Litlhaloso tsa Panel - ACM200 & ACM210

1. Boema-kepe ba taolo ea RS-232 - hokela sesebelisoa sa taolo ea motho oa boraro bakeng sa taolo ea sistimi ea Multicast e sebelisang RS232.
2. Toggle ea ntlafatso ea MCU - e sebelise ha u ntlafatsa firmware ea MCU feela. Tloha sebakeng se tloaelehileng bakeng sa ts'ebetso e tloaelehileng.
3. Seta bocha - tobetsa e khuts'oane e qala ACM, mochini o hatelletsoeng ka nako e telele (metsotsoana e 10) o khelosa ACM.
4. IO Level switch - e boloketsoe tšebeliso ea nako e tlang.
5. IO Level phoenix - e boloketsoe tšebeliso ea nako e tlang.
6. Video LAN (PoE) - hokela ho sesebelisoa sa marang-rang seo likarolo tsa Blustream Multicast li hokahaneng ho sona.
7. Laola boema-kepe ba LAN - hokela marang-rang a teng ao sistimi ea motho oa boraro a lulang ho ona. The Control LAN port e sebelisetsoa Telnet/IP taolo ea Multicast system. Eseng PoE.
8. IR Ctrl (ho kenya IR) - jackmm ea stereo ea 3.5mm. Hokela ho sistimi ea motho oa boraro haeba u sebelisa IR joalo ka mokhoa o khethiloeng oa ho laola sistimi ea Multicast. Ha o sebelisa 3.5mm stereo ho mono cable e kenyellelitsoeng, etsa bonnete ba hore tataiso ea cable e nepahetse.
9. IR - fetola IR voltage pakeng tsa 5V kapa 12V input bakeng sa IR Ctrl.
10. Letšoao la matla a LED
11. Boema-kepe ba motlakase - sebelisa adaptara ea 12V 1A DC (e rekisoang ka thoko) haeba e sa sebelise sesebelisoa sa marang-rang sa PoE.

ACM Control Ports

Likou tsa puisano tsa ACM li fumaneha liphanele tse peli mme li kenyelletsa likhokahano tse latelang:

Lihokelo:
A. TCP/IP - bakeng sa tsamaiso ea Multicast system (RJ45 connector)
B. Infrared (IR) Input* – 3.5mm jack stereo – bakeng sa Multicast I/O switching control feela
C. RS-232 - bakeng sa tsamaiso ea Multicast system / RS-232 pass-through (DB9)
* Ka kopo hlokomela: ACM200 e ka sebelisoa ka bobeli ba li-line tsa 5V le 12V IR. Ka kopo etsa bonnete ba hore switch (e haufi le boema-kepe ba IR) e khethiloe ka nepo ho latela tlhaiso-leseling ea mohala oa IR ho tsoa ho sistimi ea taolo.
TCP/IP:
Blustream ACM e ka laoloa ka TCP/IP. Bakeng sa lenane le felletseng la liprothokholo ka kopo bona tokomane e arohaneng ea 'API Commands' e ka khoasolloang ho tsoa ho Blustream websebaka. Ho lokela ho sebelisoa patch lead e 'otlolohileng' ea RJ45 ha e hokahantsoe le sesebelisoa sa marang-rang.
Control Port: 23
IP e ikemetseng: 192.168.0.225
Lebitso la mosebelisi la kamehla: admin
Lekunutu la kamehla: 1 2 3 4
Ka kopo hlokomela: ha u qala ho kena ho ACM, ho tla hlokahala hore u kenye phasewete e ncha. Ho ke ke ha khoneha ho tsosolosa sena ntle le ho tsosolosa yuniti ea ACM. Ka kopo netefatsa hore phasewete e ncha e ngotsoe fatše 'me e bolokiloe hore e sebelisoe nakong e tlang.
RS-232 / Seriana:
ACM e ka laoloa ka serial ho sebelisa sehokelo sa DB9. Litlhophiso tsa kamehla ka tlase. Bakeng sa lenane le felletseng la liprothokholo ka kopo bona tokomane e arohaneng ea 'API Commands' e ka khoasolloang ho tsoa ho Blustream websebaka.
Lebelo la Baud: 57600
Bonyane ba data: 8-bit
Parity: Ha ho letho
Stop Bit: 1-bit
Taolo ea Phallo: Ha ho letho
Sekhahla sa baud bakeng sa ACM se ka fetoloa ho sebelisoa web-GUI, kapa ka ho fana ka taelo e latelang ka RS-232 kapa Telnet:
RSB x : Beha RS-232 Baud Rate ho X bps
Moo X = 0 : 115200
1 : 57600
2 : 38400
3 : 19200
4 : 9600

ACM Control Ports - Taolo ea IR

Sistimi ea Multicast e ka laoloa ho sebelisoa taolo ea IR ea lehae ho tsoa ho sistimi ea motho oa boraro. Khetho ea mohloli ke eona feela tšobotsi e fumanehang ha u sebelisa taolo ea IR ea sebakeng seo - likarolo tse tsoetseng pele tsa ACM tse kang mokhoa oa lebota la video, ho kenya molumo joalo-joalo li ka finyelloa feela ka ho sebelisa RS-232 kapa TCP / IP control.
Blustream e thehile 16x input & 16x tlhahiso ea litaelo tsa IR tse lumellang khetho ea mohloli ho fihla ho 16x Multicast Transmitters ho fihlela ho 16x Multicast Receivers. Bakeng sa litsamaiso tse kholo ho feta lisebelisoa tsa mohloli oa 16x, ho tla hlokahala taolo ea RS-232 kapa TCP/IP.

ACM e tsamaisana le lisebelisoa tsa 5V le 12V IR ka bobeli. Ha ACM e sebelisoa ho amohela tlhahiso ea IR boema-kepeng ba IR CTRL, switch e haufi e tlameha ho fetoloa ka nepo hore e lumellane le IR vol.tage mola oa tsamaiso e khethiloeng ea taolo pele ho hokahanngoa.
Ka kopo hlokomela: kh'abela ea Blustream IR e fanoeng kaofela ke 5V
3.5mm Stereo ho Mono Cable - IR-CAB (e kenyelelitsoe)
Blustream IR Control cable 3.5mm Mono ho 3.5mm Stereo bakeng sa ho hokahanya tharollo ea batho ba boraro ho lihlahisoa tsa Blustream.
E lumellana le lihlahisoa tsa motho oa boraro tsa 12V IR.
Ka kopo hlokomela: Cable e lebile moo ho bontšitsoeng

Moamoheli oa IR - IRR - jack ea stereo 3.5mm (ka boikhethelo)
Blustream 5V IR receiver ho amohela lets'oao la IR le ho aba ka lihlahisoa tsa Blustream

Pini ea wiring - IR-CAB - jack ea stereo 3.5mm:

Pini ea wiring - IR-CAB - jack ea mono 3.5mm:

Khokahano ea marang-rang ea ACM

ACM e sebetsa e le borokho pakeng tsa marang-rang a taolo le marang-rang a video ho netefatsa hore data e tsamaeang pakeng tsa marang-rang a mabeli ha e kopane. ACM e tlameha ho hokahanngoa ka cable ea CAT ho latela litlhoko tse tloaelehileng tsa marang-rang.

Web- GUI Tataiso

The web-GUI ea ACM e lumella ho hlophisoa ka botlalo ha sistimi e ncha, hammoho le tlhokomelo e tsoelang pele le taolo ea sistimi e teng ka web portal.
ACM (qetellong) e ka fumaneha sesebelisoa sefe kapa sefe se hoketsoeng marang-rang ho kenyelletsa: matlapa, lifono tse bohlale le lilaptop tse ho marang-rang a 'Laola' a tšoanang. ACM e romelloa ka aterese ea IP e sa fetoheng (joalo ka tlase), 'me ha ea hlophisoa ka DHCP e lumelletsoeng.

Kena / Kena

Re khothaletsa hore komporo / laptop e hokahane ka kotloloho le boema-kepe ba taolo ea ACM bakeng sa tlhophiso ea pele ea sistimi e ncha. Joalokaha ho boletsoe pejana, ACM e romelloa ka aterese ea IP e tsitsitseng, eseng DHCP. Ho na le litaelo tsa mokhoa oa ho lokisa aterese ea IP e tsitsitseng ea komporo / laptop ho ea ka morao bukeng ena.
Ho kena, bula a web sebatli (ke hore, Safari, Firefox, MS Edge joalo-joalo) 'me u tsamaee ho ea atereseng ea kamehla ea IP ea ACM e leng: 192.168.0.225

Leqephe la ho saena le hlahisoa mabapi le khokahano ea ACM. Password ea kamehla ea admin ke: 1 2 3 4
ACM e hloka phasewete e ncha hore e beheloe Mookameli ha a kena ka lekhetlo la pele. Ho ke ke ha khoneha ho tsosolosa sena ntle le ho tsosolosa yuniti ea ACM. Ka kopo netefatsa hore phasewete e ncha e ngotsoe fatše 'me e bolokiloe hore e sebelisoe nakong e tlang. Hang ha phasewete e ncha e se e bōpiloe, ACM e tla hloka sena hape ho kena ho menu ea tsamaiso ea yuniti.

Wizard e Ncha ea ho Seta Morero

Ha u qala ho kena ho ACM, ho tla hlahisoa Set-up Wizard bakeng sa ho lokisa likarolo tsohle tsa tsamaiso ea Multicast. Sena se etselitsoe ho potlakisa tlhophiso ea sistimi e ncha kaha li-transmitters tse ncha tsa Multicast & Receivers li ka hokahanngoa le sesebelisoa sa marang-rang ka nako e le 'ngoe, empa e sa hlahise khohlano ea IP nakong ea tlhophiso ea sistimi. Sena se fella ka tsamaiso eo ho eona likarolo tsohle li abetsoeng lebitso le aterese ea IP ka mokhoa o ikemetseng le ka tatellano bakeng sa tšebeliso ea motheo ea tsamaiso.

ACM Set-up Wizard e ka hlakoloa ka ho tobetsa 'Koala'. Ka kopo hlokomela hore sistimi e ke ke ea hlophisoa hajoale, empa e ka tsoelapele ka ho etela "Project" menu. Haeba ke Morero File e se e ntse e fumaneha (ke hore, ho tlosa ACM sebakeng se seng se ntse se le teng), sena se ka rekoa ka ho sebelisa .json e bolokiloeng. file ka ho tobetsa 'Import Project'.
Tobetsa 'E latelang' ho tsoela pele ho seta:

Haeba mothating ona lisebelisoa tsa marang-rang tse khethiloeng li sa hlophisoa hore li sebelisoe le Blustream Multicast system, tlanya ho hyperlink 'network switch setup guides' ho ea sebakeng se bohareng. webleqephe le nang le Litlhahiso tse tloaelehileng tsa Network Switch.
MohlankanaampSetšoantšo sa schematic bakeng sa likhokahano tsa ACM se ka fumaneha ka ho tobetsa sehokelo se tšoailoeng 'diagram'. Sena se tla etsa bonnete ba hore ACM e hokahane ka nepo ho sistimi e pharalletseng ea Multicast pele Setha-up Wizard e qala. Hang ha likhokahano tsa ACM li netefalitsoe, tobetsa 'E latelang'.
Nakong ea ts'ebeliso e tloaelehileng, ACM e tla khetha bakeng sa lintlafatso tsa maemo le li-skrini tsa mecha ea litaba e tsamaeang ka har'a sistimi. Khetho ea tlhahisoleseling ena e lula e ama lits'ebetso tse kholo (75+ lintlha tsa ho qetela). E latelang stage ea tlhophiso ke ho hlalosa esale pele boholo ba morero. Likhetho ke tsena:
0-75 Lihlahisoa
75+ Lihlahisoa
Setlhophiso sena se ka fetoloa nakong e tlang haeba boholo ba sistimi bo ka eketseha.
Tobetsa konopo e loketseng ho khetha boholo ba sistimi:

Ho na le mekhoa e 'meli ea ho kenyelletsa lisebelisoa tse ncha tsa Transmitter le Receiver ho sistimi:
Mokhoa oa 1: hokela likarolo TSOHLE tsa Transmitter le Receiver ho switjha ea marang-rang. Mokhoa ona o tla lokisa lisebelisoa tsohle kapele ka liaterese tsa bona tsa IP tse ipapisitseng le tse latelang:
Li-transmitters:
Transmitter ea pele e tla fuoa aterese ea IP ea 169.254.3.1. Transmitter e latelang e tla fuoa aterese ea IP ea 169.254.3.2, joalo-joalo….
Hang ha IP ea 169.254.3.x e tlatsitsoe (li-unit tse 254), software e tla fana ka aterese ea IP ea 169.254.4.1, joalo-joalo…
Hang ha IP ea 169.254.4.x e tlatsitsoe, software e tla fana ka aterese ea IP ea 169.254.5.1, joalo-joalo ho fihlela 169.254.4.254.
Baamoheli:
Moamoheli oa pele o tla fuoa aterese ea IP ea 169.254.6.1. Moamoheli ea latelang o tla fuoa aterese ea IP ea 169.254.6.2, joalo-joalo….
Hang ha IP ea 169.254.6.x e tlatsitsoe (li-unit tse 254) software e tla fana ka aterese ea IP ea 169.254.7.1, joalo-joalo…
Hang ha IP ea 169.254.7.x e tlatsitsoe, software e tla fana ka aterese ea IP ea 169.254.8.1, joalo-joalo ho fihlela 169.254.8.254.
Ha e se e phethiloe, lisebelisoa li tla hloka ho tsejoa ka letsoho - mokhoa ona o tla fana ka liaterese tsa IP tsa sehlahisoa le li-ID ho sesebelisoa se seng le se seng se hokahaneng le sesebelisoa sa marang-rang ka tšohanyetso (eseng ka switch port).
Mokhoa oa 2: hokela e 'ngoe le e 'ngoe ea Blustream Multicast Transmitter le Receiver ho marang-rang ka bonngoe. Setha-up Wizard e tla hlophisa likarolo ka tatellano ha li ntse li hokahane / li fumanoa. Mokhoa ona o lumella taolo ea kabo ea tatellano ea liaterese tsa IP le li-ID tsa sehlahisoa ka seng - likarolo tsa Transmitter / Receiver li ka ngolisoa ka nepo.
… sheba leqephe le latelang bakeng sa tlhaloso ea Mokhoa oa HDCP
Mokhoa oa HDCP: Blustream Multicast Receivers ka bo eona ba eketsa HDCP e loketseng molapong o tsoang (ho sa tsotelehe hore na sesebelisoa sa mohloli se na le HDCP e kentsoeng molatsoaneng oa sona o tsoang).
Likonopo tsa radial tsa HDCP Mode li lumella HDCP hore e qobelloe, kapa e latele tumellano e tloaelehileng.
Ha u sebelisa lisebelisoa tsa khoebo (tse kang lisebelisoa tsa VC) moo ho se nang HDCP e kenyelelitsoeng holim'a tlhahiso ea letšoao la mohloli, le lisebelisoa tse sa lumellaneng le HDCP li ntse li sebelisoa ho RX / output (ke hore software ea ho hapa), re ka khothaletsa ho beha tsamaiso ho 'Bypass'.
Ho tsamaisa toeba holim'a letšoao le lenyenyane la "tlhahisoleseding" (le totobalitsoeng skrineng se ka tlase ka boputsoa) ho fana ka tlhaloso ka har'a GUI.
Lemoha ka kopo: Mokhoa oa 'Bypass' ha o "amohe" HDCP ho lets'oao la HDMI. Haeba o le maemong a 'Bypass', lets'oao la HDCP1.x le tla etsa hore HDCP1.x e fetisoe mochining. Haeba ho se na HDCP lets'oao, li-unit tsa Multicast li ke ke tsa eketsa HDCP haeba ho 'Bypass'.
Hang ha mokhoa oa ho seta o se o khethiloe, tobetsa konopo ea 'Start Scan' (e totobalitsoeng ka tlase).
ACM e tla batla likarolo tse ncha tsa Blustream Multicast marang-rang, 'me e tla tsoelapele ho batla lisebelisoa tse ncha ho fihlela nako e kang:
– Konopo ya 'Stop Scan' e tala e tlanya
- Konopo ea 'Next' e putsoa e tobetsoa ho ntšetsa pele Set-up Wizard hang ha likarolo tsohle li se li fumanoe.

Ha li-unit tse ncha li fumanoa ke ACM, li-unit li tla fihla likholomong tse amehang tse tšoailoeng Li-Transmitters kapa Receivers.
Ho kgothaletswa ho ngola diyuniti ka bomong sebakeng sena.
Likarolo tsa Multicast li tla hlophisoa ka tlhaiso-leseling e ncha ea aterese ea IP ntlheng ena, 'me e tla qala hape ka bo eona.
Hang ha likarolo tsohle li se li fumanoe le ho hlophisoa, tobetsa 'Stop Scan', ebe 'E latelang'.
Leqephe la ho Seta Lisebelisoa le lumella hore Li-Transmitters le Li-Receivers li rehe mabitso ka nepo. Litlhophiso tsa EDID le Scaler bakeng sa Li-Transmitters kapa Receivers ka bomong li ka hlophisoa kamoo ho hlokahalang. Ho fumana thuso ka litlhophiso tsa EDID le Scaler, tobetsa likonopo tse amehang tse tšoailoeng 'EDID Help' kapa 'Scaling Help'.

Likarolo tsa leqephe la ho Seta Sesebediswa li kenyelletsa:

1. Lebitso la Lisebelisoa - nakong ea tlhophiso, Li-Transmitters / Receivers li abeloa ka bo eona mabitso a kamehla, e leng, Transmitter 001 joalo-joalo. Mabitso a Transmitter / Receiver a ka fetoloa ka ho thaepa lebokoseng le lumellanang.
2. EDID - lokisa boleng ba EDID bakeng sa Transmitter ka 'ngoe (mohloli). Sena se sebelisetsoa ho kopa liqeto tse khethehileng tsa video le molumo hore sesebelisoa sa mohloli se ka hlahisoa. Thuso ea mantlha ka khetho ea EDID e ka fumanoa ka ho tobetsa konopo e tšoailoeng 'EDID Help'. Ka kopo hlokomela, EDID ea kamehla ea thepa ea Blustream ke: 1080p, 2ch audio.
3. View (li-transmitters feela) - e bula pop-up e latelang:Pop-up ena e bonts'a setšoantšo peleview ea mecha ea phatlalatso e amoheloang hajoale ke yuniti ea Transmitter ka sepheo sa ho reha mabitso. Bokhoni ba ho tsebahatsa yuniti ka ho benya phanele e ka pele Power LED ho yuniti, le bokhoni ba ho qalisa yuniti kaofela bo tla thusa ka ho tsebahatsa yuniti bakeng sa merero ea ho reha mabitso.
4. Scaler - fetola qeto ea tlhahiso ka ho sebelisa sekala sa video se hahiloeng ho Multicast Receiver. Scaler e khona ho phahamisa le ho theola lets'oao la video le kenang.
5. Liketso - e bula pop-up e latelang:Ka nako e sa lekanyetsoang, nakong ea tlhophiso, OSD e tla hlaha likrineng tsohle tse hokahantsoeng le liyuniti tsa Receiver bakeng sa boitsebahatso bo bonolo ba Baamoheli. Bokhoni ba ho tsebahatsa likarolo tsa motho ka mong ka ho benya phanele e ka pele ea Power LED's, le bokhoni ba ho Reboot yuniti bo teng mona.
6. Tlosa / Bulela OSD - e fetolela ID ea sehlahisoa ho li-skrini / li-skrini tsohle tse hokahaneng (tse butsoeng ka boiketsetso nakong ea tlhophiso - OSD e tla tima ka bo eona ha wizate e ntse e tsoela pele).
7. E latelang - e tsoela pele ho ea leqepheng la ho Tlatsa Wizate ea ho Seta

Leqephe la Wizard Completion le phethela ts'ebetso ea mantlha ea tlhophiso, ho fana ka likhokahano tse sebelisoang hangata bakeng sa likhetho tse tsoetseng pele tsa ho seta bakeng sa Mabota a Video (ha e fumanehe bakeng sa litsamaiso tsa IP50HD), Fixed Signal Routing (IR, RS-232, Audio joalo-joalo), le bokhoni ba ho boloka tlhophiso. file (e khothalelitsoe).
Tobetsa 'Qetella' hang ha e phethiloe ho tsoela pele leqepheng la 'Hula le ho Lahlela'.

Web-GUI – Menu Overview

Lenane la 'User Interface' le fa moeti moeti bokhoni ba ho chencha le peleview Multicast system ntle le ho lumella ho fihlella litlhophiso leha e le life tse ka fetolang mekhoa ea motheo ea tsamaiso.

1. Taolo ea ho hula le ho theola - taolo ea khetho ea mohloli bakeng sa Multicast Receiver e 'ngoe le e 'ngoe ho kenyelletsa le setšoantšo sa peleview ea lisebelisoa tsa mohloli ho pholletsa le sistimi
2. Taolo ea Lebota la Video - e sebelisetsoang taolo ea 'Drag & Drop' ea khetho ea mohloli bakeng sa likarolo tsa lebota la video ka har'a sistimi, ho kenyeletsoa le setšoantšo sa pele.view ea lisebelisoa tsa mohloli hohle. Ntho ea menu e fumaneha feela moo lebota la video le lokiselitsoeng ka har'a sistimi
3. Log In - e sebelisetsoang ho kena ka har'a sistimi joalo ka Mosebelisi, kapa Motsamaisi

Lenaneo la Tsamaiso le fumaneha ho tsoa ho password e le 'ngoe joalo ka ha e setiloe nakong ea ho qala. Lenane lena le lumella hore tsamaiso ea Multicast e hlophisoe ka ho feletseng, e nang le phihlelo ea litlhophiso tsohle le likarolo tsa tsamaiso.
Ka kopo hlokomela: ha ho kgothaletswe ho tlohela phihlello ya Administrator kapa password ya Administrator ho mosebelisi.

1. Taolo ea ho Hula le ho Theola - taolo ea khetho ea mohloli bakeng sa Moamoheli e mong le e mong ho kenyelletsa le setšoantšo sa peleview ea lisebelisoa tsa mohloli
2. Taolo ea Lebota la Video - taolo ea khetho ea mohloli bakeng sa likarolo tsa lebota la video, ho kenyeletsoa le setšoantšo sa preview ea lisebelisoa tsa mohloli
3. Peleview - bonts'a video e sebetsang ho tsoa ho Transmitter efe kapa efe e hokahantsoeng le / kapa Receiver
4. Morero - view kapa lokisa sistimi e ncha kapa e teng ea Blustream Multicast
5. Li-transmitters - kakaretso ea li-Transmitters tsohle tse kentsoeng, tse nang le likhetho bakeng sa taolo ea EDID, ho lekola mofuta oa FW, ho ntlafatsa litlhophiso, ho kenyelletsa li-TX tse ncha, ho nkela sebaka kapa ho qala lihlahisoa hape.
6. Li-Receivers - kakaretso ea li-Receivers tsohle tse kentsoeng, tse nang le likhetho tsa tlhahiso ea tharollo (HDR / scaling), ts'ebetso (mokhoa oa lebota la video / matrix), li-setting tsa ntlafatso, li kenyelletsa li-RX tse ncha, lihlahisoa tse nchafatsang kapa ho qala bocha.
7. Tsela e Tsitsitseng ea Letšoao - lokisa mokhoa o ikemetseng oa lipontšo tsa Video, Audio, IR, Serial, USB, kapa CEC
8. Tlhophiso ea Lebota la Video - tlhophiso le tlhophiso ea Baamoheli ho theha letoto la lebota la video ho fihlela boholo ba 9 × 9, ho kenyelletsa: puseletso ea bezel / lekhalo, ho otlolla / ho lekana, le ho potoloha. (Ka kopo hlokomela: mabota a video ha a tšehetsoe ka litsamaiso tsa IP50HD).
9. Basebelisi - theha kapa ho laola basebelisi ba sistimi
10. Litlhophiso - litlhophiso tsa sistimi ho kenyelletsa: lintlha tsa marang-rang, morero oa ho hlakola, le ho hlophisa bocha ACM
11. Ntlafatsa Lisebelisoa - sebelisa lintlafatso tsa morao-rao tsa firmware ho ACM, le li-Transmiters / Receivers tse hokahantsoeng
12. Nchafatsa Password - ntlafatsa lintlha tsa password tsa Administrator bakeng sa ho fihlella ACM web- GUI
13. Ho tsoa - tsoa ho Mosebelisi / Motsamaisi oa hajoale

Web-GUI - Hula & Lahlela Taolo

Leqephe la Taolo ea Hula le ho Lahlela le sebelisetsoa ho fetola kapele le ka nepo mohloli oa mohloli (Transmitter) bakeng sa ponts'o ka 'ngoe (kapa All) (Receiver). Kopano ea mabitso ea Li-Transmitter le Receivers e tla nchafatsoa ho latela mabitso a fanoeng nakong ea tlhophiso, kapa joalo ka ha e ntlafalitsoe maqepheng a Transmitter kapa Receiver.
Hang ha sistimi e se e hlophisitsoe ka botlalo, leqephe la "Drag & Drop Control" le tla bonts'a lihlahisoa tsohle tsa marang-rang tsa Transmitter le Receiver. Lihlahisoa tsohle tsa Multicast li tla bonts'a molatsoana o sebetsang o tsoang sesebelisoa, o khathollang metsotsoana e meng le e meng.
Ka lebaka la boholo ba fensetere e bonts'ang lifono tse itseng, matlapa kapa lilaptop, haeba palo ea li-Transmitters le Receivers e ka ba kholo ho feta boholo bo fumanehang skrineng, Mosebelisi o fuoa bokhoni ba ho tsamaisa / swipe lisebelisoa tse fumanehang (ho tloha ho le letšehali ho ea ho le letona).

Ho fetola mehloli, tobetsa mohloling o hlokahalang / Transmitter, 'me u hule peleview ho Moamoheli ea hlokahalang peleview.
Moamoheli peleview fensetere e tla nchafatsoa ka molatsoana oa mohloli o khethiloeng.
The Drag & Drop switch e tla lokisa molaetsa oa Video/Audio ho tloha ho Transmitter ho ea ho Receiver, empa eseng Tsela e Tsitsitseng ea matšoao a taolo.
Na 'No Signal' e lokela ho hlahisoa ho Transmitter preview Fensetereng, ka kopo sheba hore na sesebelisoa sa HDMI se buletsoe, se ntša lets'oao, 'me se hokahane ka thapo ea HDMI ho Transmitter. Sheba hape hore litlhophiso tsa EDID tsa sesebelisoa sa Transmitter lia sebetsa le mohloli o sebelisoang.
Na 'No Signal' e lokela ho hlahisoa ka har'a Receiver preview Fensetereng, hlahloba hore yuniti e hokahane ebile e tsamaisoa ho tsoa marang-rang (switch), 'me e na le khokahano e nepahetseng ho unit e sebetsang ea Transmitter.
Na 'Ha ho Pontšo' e hlahang ka har'a Receiver preview fensetereng, hlahloba pontšo e hokahaneng e tsamaisoa 'me e na le khokahanyo e nepahetseng ea HDMI ho Moamoheli.
Ho na le fensetere ea 'All Receivers' e ka letsohong le letšehali la fensetere ea Baamoheli. Ho hula le ho lahlela Transmitter fensetereng ena ho tla fetola tsela bakeng sa Baamoheli TSOHLE ka har'a sistimi ho shebella mohloli o khethiloeng. Ho lokile peleview ea fensetere ena bonts'a letšoao la Blustream, sena se bolela hore ho na le motsoako oa mehloli e shebelloang ho pholletsa le Baamoheli ka har'a sistimi. Mongolo o ka tlase ho 'Bohle ba amohelang' o tla hlahisa: 'TX: Different' ho bolela sena.
Lemoha ka kopo: Leqephe la ho Hula le ho Lahlela hape ke leqephe la lehae la mosebelisi ea mafolofolo oa Moeti oa Multicast system - mehloli feela eo Moeti kapa Mosebelisi a nang le tumello ea ho e etsa. view e tla bonahala.
Baamoheli ba Mokhoa oa Lebota la Video ha ba hlahisoe leqepheng la Hula le ho Lahlela.

Web-GUI – Video Wall Control

Ho thusa ka taolo e nolofalitsoeng ea ho fetola Wall Wall, ho na le leqephe le arohaneng la Video Wall Drag & Drop Control. Khetho ena ea menyetla e fumaneha feela hang ha Lebota la Video le se le hlophisitsoe ka har'a sistimi ea ACM / Multicast.

Mohloli (Transmitter) pele hoview lifensetere li bonts'itsoe kaholimo ho leqephe ka setšoantšo sa setšoantšo sa Lebota la Video se bontšitsoeng ka tlase. Ho chencha lethathamo la Lebota la Video ho tloha mohloling o mong ho ea ho o mong, Hula le ho Lahlela mohloli peleview Fesetere ho Lebota la Video peleview tlase. Sena se tla fetola li-skrini tsohle tse hokahaneng ka har'a Lebota la Video (ka har'a sehlopha se ka har'a Lerako la Video feela) ho ea mohloling o le mong / Transmitter ho Configuration e khethiloeng hajoale (ka sehlopha). Kapa Hula & Lahlela Transmitter peleview skrineng sa 'Ntho e le' ngoe ha Lebota la Video le hlophisitsoe ka mokhoa o ikhethileng.
Sistimi ea Blustream Multicast e ka ba le Marako a Video a mangata (IP2xxUHD, kapa IP3xxUHD sistimi feela). Ho khetha mofuta o fapaneng oa Lebota la Video, kapa ho tsamaisa Configuration / preset e boletsoeng esale pele bakeng sa Lerako le leng le le leng la Video ho ka etsoa ka ho sebelisa mabokose a theoha ka holimo ho setšoantšo sa setšoantšo sa Lebota la Video. Setšoantšo sena sa setšoantšo se tla intlafatsa ha u khetha Lebota la Video le fapaneng kapa Tlhophiso.
Ha skrini se ka har'a Lebota la Video se ka bonts'a ho GUI se bonts'a 'RX Ha e abeloe', sena se bolela hore Lebota la Video ha le na yuniti ea Receiver e abetsoeng sehlopha. Ka kopo khutlela ho Lebota la Video le hlophisitsoeng ho abela Moamoheli ka nepo.
Bakeng sa litaelo tse tsoetseng pele tsa API bakeng sa taolo ea lihlopha tsa Video Wall ka har'a sistimi, ka kopo sheba tokomane ea Taelo ea API e fumanehang ho khoasolla ho tsoa ho Blustream. websebaka.

Web-GUI – Peleview

Peleview tšobotsi ke tsela e potlakileng ea ho view mecha ea litaba e ntse e hasoa ka Multicast system hang ha e lokiselitsoe. Peleview ho tsoa ho sesebelisoa leha e le sefe sa mohloli oa HDMI ho ea ho Multicast Transmitter, kapa molapo o amoheloang ke Moamoheli ofe kapa ofe tsamaisong ka nako e le 'ngoe. Sena se thusa haholo bakeng sa ho lokisa liphoso le ho hlahloba lisebelisoa tsa mohloli li tsamaisoa, le ho hlahisa lets'oao la HDMI, kapa ho lekola boemo ba I/O ba sistimi:

Peleview lifensetere li bonts'a skrineng ea media e nchafatsang metsotsoana e meng le e meng. Ho khetha Transmitter kapa Receiver ho ea peleview, sebelisa lebokose le theoha ho khetha Transmitter kapa Receiver ka bomong eo u lokelang ho e khetha peleview.

Web-GUI - Kakaretso ea morero

Fetileview ea li-unit tse ntseng li hlophisoa hajoale ho Multicast system, kapa bakeng sa ho lekola marang-rang bakeng sa lisebelisoa tse ncha tse tla abela sistimi:

Likhetho tse leqepheng lena li kenyelletsa:

1. Size Size: toggle between: 0-75 Products, le 75+ Products.
2. Fetolela OSD: Bulela / Tlosa OSD (On Screen Display). Ho fetola OSD On ho bonts'a nomoro ea ID (ke hore ID 001) ea Multicast Receiver ho ponts'o ka 'ngoe e le sekoaelo ho mecha ea litaba e ajoang. Ho tima OSD Off ho tlosa OSD.
3. Export Project: theha polokelo file (.json) bakeng sa tlhophiso ea hajoale ea sistimi.
4. Import Project: kenya projeke e seng e lokisitsoe ho sistimi ea hajoale. Sena se thusa haholo-holo ha u theha tsamaiso ea bobeli kapa ho atolosoa ho tsamaiso ea hona joale e seng sebakeng seo litsamaiso tse peli li ka kopanngoang ho tsona.
5. Hlakola Project: e hlakola morero oa hajoale.
6. Abela Lisebelisoa tse Ncha: abela lisebelisoa tse fumanehang karolong ea Lisebelisoa tse sa abuoang (botlaaseng ba leqephe lena) ho sistimi ea hajoale.
7. Tsoela Pele ho Skena le ho Fana ka Boiketsetso: tsoela pele ho hlahloba marang-rang 'me u abele lisebelisoa tse ncha tsa Multicast ho ID le aterese ea IP e hokahaneng. Ha feela o hokela yuniti e le NNGWE e ntjha, sebedisa kgetho ya 'Scan Once' - ACM e tla tswelapele ho lekola marangrang bakeng sa disebediswa tse ntjha tsa Multicast ho fihlela e fumanwa, kapa o kgethe konopo ena hape ho emisa ho skena.
8. Skena Hang: hlahloba marang-rang hang bakeng sa lisebelisoa life kapa life tse ncha tsa Multicast tse hokahaneng, ebe u hlahisoa ka pop up ho fana ka sesebelisoa se secha, kapa u abele yuniti e ncha ho ID e latelang e fumanehang le aterese ea IP joalo ka ha e hokahane.

Web-GUI - Li-transmitters

Leqephe la kakaretso la Transmitter le felileview ea lisebelisoa tsohle tsa Transmitter tse hlophisitsoeng ka har'a sistimi, ka bokhoni ba ho nchafatsa sistimi kamoo ho hlokahalang.

Likarolo tsa leqephe la kakaretso la Transmitter li kenyelletsa:

1. ID - nomoro ea ID (input) e sebelisetsoa ho laola tsamaiso ea Multicast ha u sebelisa liforomo tsa taolo ea motho oa boraro.
2. Lebitso - lebitso le abetsoeng Transmitter (hangata sesebelisoa se khomaretsoeng ho Transmitter).
3. Aterese ea IP - aterese ea IP e abetsoeng Transmitter nakong ea tlhophiso.
4. Aterese ea MAC - e bonts'a aterese ea MAC ea Transmitter (LAN 1 port).
5. Dante MAC - e bonts'a aterese ea MAC ea boema-kepe ba LAN2 moo khokahano e ikemetseng ea Dante e sebelisoang. Ka kopo, sheba konopo e tšoailoeng LAN2 Mode Help bakeng sa tlhaloso e eketsehileng mabapi le ho arola marang-rang a Video le Dante.
6. Sehlahisoa - se khetholla sehlahisoa se sebelisoang se hokahaneng le sistimi.
7. Firmware - mofuta oa firmware o kentsoeng hona joale ho Transmitter. Bakeng sa tlhaiso-leseling e batsi mabapi le ntlafatso ea firmware, ka kopo bona karolo ea 'Update Firmware'.
8. Boemo - bo bonts'a boemo ba Marang-rang / Offline ba Transmitter ka 'ngoe. Ha sehlahisoa se hlaha e le 'Offline', hlahloba khokahanyo ea li-unit ho switjha ea marang-rang, lebelo la ho hokela marang-rang.
9. EDID - lokisa boleng ba EDID bakeng sa Transmitter ka 'ngoe (mohloli). Sena se sebelisetsoa ho kopa liqeto tse khethehileng tsa video le molumo hore sesebelisoa sa mohloli se ka hlahisoa. Thuso ea mantlha e ka fumanoa khethong ea EDID ka ho tobetsa konopo e kaholimo ho leqephe e tšoailoeng 'EDID Help'. Likhetho tse fumanehang tsa EDID tse sebelisetsoang IP50HD, IP2xxUHD, le IP3xxUHD litsamaiso kaofela lia fapana.
10. HDMI Audio - e khetha molumo oa mantlha oa HDMI, kapa e nkela molumo o kentsoeng sebaka ka molumo oa lehae oa analogue ho Transmitter. Litlhophiso tsa kamehla e tla ba 'Auto'.
11. Mokhoa oa LAN2: moo IP250UHD kapa IP350UHD e sebelisoang teng, hoa khoneha ho arola molumo oa Dante bakeng sa ho hokahana le marang-rang a fapaneng a Dante ho tloha mona. Moo IP200UHD kapa IP300UHD e sebelisoang (ha ho na khokahano ea Dante), khetho ena ha e khethoe. Sheba tafole e ka tlase bakeng sa khetho ea LAN (ha e fumanehe ho firmware ea ACM bakeng sa IP50HD)
12. Liketso - e bula fensetere ea pop-up e nang le litlhophiso tse tsoetseng pele tsa tlhophiso. Sheba leqephe le latelang bakeng sa lintlha tse ling.
13. Hlahisa - tsosolosa lintlha tsohle tsa morao-rao tse mabapi le lisebelisoa tse ka har'a tsamaiso.

MOKHOA OA VLAN	PoE/Lan	2 ea RJ45	SFP
0 (ea mantlha)	VoIP + Dante	E holofetse	VoIP + Dante
1	VoIP	Dante	E holofetse
2	VolP/Dante	Latela boema-kepe ba PoE/Lan	VoIP + Dante

Web-GUI – Transmitters – Actions

Konopo ea 'Liketso' e lumella hore likarolo tse tsoetseng pele tsa lihlopha li fihlellehe le ho hlophisoa.
Lebitso - Mabitso a Transmitter a ka lokisoa ka ho kenya lebitso lebokoseng la mongolo la mofuta oa mahala. Ka kopo hlokomela: sena se lekanyelitsoe ho litlhaku tse 16 ka bolelele, 'me litlhaku tse ling li kanna tsa se ke tsa tšehetsoa.
Ntlafatso ea ID - Basebelisi ba Tsoetseng Pele Feela - ID ea yuniti e behiloe (e le ea kamehla) ho palo e lekanang le linomoro tsa ho qetela tsa 3 tsa aterese ea IP ea aterese ea Transmitter 3 e fuoa aterese ea IP ea 169.254.3.3 'me e tla ba le ID ea 3. Ho fetola ID ea yuniti ha ho khothalletsoe.
Sistimi ea Sisteme - fetola boholo ba sistimi ka Transmitter
HDMI Audio - khetha pakeng tsa: Auto, HDMI, kapa audio ea Analogue
Mokhoa oa HDCP - khetha pakeng tsa: HDCP Bypass, Force 2.2, kapa Force 1.4
CEC Pass-through (On / Off) - e lumella hore CEC (Consumer Electronic Command) e romelloe ka tsamaiso ea Multicast ho ea le ho tloha mohloling oa mohloli o amanang le Transmitter. Ka kopo hlokomela: CEC e tlameha ho lumelloa yuniti ea Moamoheli le hore litaelo tsa CEC li romelloe lipakeng. Litlhophiso tsa kamehla tsa karolo ena li TIMA.
Pontšo ea Panel e ka Pele (On / Off) - nolofalletsa / tima pontšo e ka pele ho Transmitter. Pontšo ea phanele e ka pele ea yuniti ea Multicast e tla fela ka mor'a metsotsoana e 90, ebe e tima. Tobetsa konopo efe kapa efe e ka pele ho Transmitter ho tsosa ponts'o ha e tima.
Front Panel Power LED Flash (On / Off / On 90 Seconds) - e tla khantša matla a LED ka phanele e ka pele ea Transmitter ho thusa ho tseba sehlahisoa kamora ho hlophisoa ha koloi. Likhetho ke: khantša lebone la matla ka linako tsohle, kapa u khantše lebone ka metsotsoana e 90 pele lebone le khutlela morao hore le bonesitsoe ruri. Ka kopo elelloa: li-LED tsa phanele e ka pele li tla tima ka mor'a metsotsoana e 90 ka pontšo e ka pele. Tobetsa e 'ngoe ea likonopo tsa CH ho tsosa yuniti.
Kopitsa EDID - bona leqephe le latelang bakeng sa tlhaiso-leseling e batsi ka 'Kopitsa EDID'.
Litlhophiso tsa serial - bulela 'Mokhoa oa Baeti' 'me u sete li-setting tsa serial port bakeng sa sesebelisoa (ke hore Baud Rate, Parity joalo-joalo).
Peleview - e bonts'a fensetere ea pop-up e nang le skrine ea ho ts'oara sesebelisoa sa mohloli se hokahaneng le Transmitter.
Qala hape - qala Transmitter hape.
Fetola - e sebelisetsoang ho fetola Transmitter e sa sebetseng. Ka kopo hlokomela: Transmitter e tla nkeloa sebaka e tlameha ho ba ntle le marang-rang hore sesebelisoa sena se sebelisoe, 'me Transmitter e ncha e tlameha ho ba yuniti ea kamehla ea feme e nang le aterese ea IP ea kamehla: 169.254.100.254.
Tlosa ho Project - e tlosa sesebelisoa sa Transmitter morerong oa hajoale.
Fektheri Reset - e khutlisetsa Transmitter ho li-setting tsa eona tsa mantlha tsa mantlha mme e beha aterese ea IP ho: 169.254.100.254.

Web-GUI - Transmitters - Actions - Kopitsa EDID
EDID (Extended Display Identification Data) ke sebopeho sa data se sebelisoang lipakeng tsa pontšo le mohloli. Lintlha tsena li sebelisoa ke mohloli ho fumana hore na liqeto tsa audio le tsa video li tšehetsoa ke ponts'o ebe ho tsoa tlhahisoleseling ena mohloli o tla fumana hore na liqeto tse ntle ka ho fetisisa tsa molumo le video li hloka ho hlahisoa.
Le hoja sepheo sa EDID e le ho etsa hore ho hokahanya pontšo ea dijithale mohloling e be mokhoa o bonolo oa plug-and-play, mathata a ka hlaha ha lipontšo tse ngata, kapa ho fetoha ha matrix a video ho hlahisoa ka lebaka la palo e ntseng e eketseha ea mefuta-futa.
Ka ho tseba esale pele qeto ea video le sebopeho sa molumo oa mohloli le sesebelisoa sa ponts'o u ka fokotsa tlhoko ea nako ea ho ts'oarana ka letsoho ho EDID ka hona ho etsa hore phetoho e potlake hape e ts'epahale.
Mosebetsi oa Copy EDID o lumella EDID ea ponts'o hore e tšoaroe le ho bolokoa ka har'a sistimi ea Multicast. Sebopeho sa EDID sa skrine se ka hopoloa ka har'a khetho ea EDID ea Transmitter. Lits'oants'o tsa EDID li ka sebelisoa ho sesebelisoa leha e le sefe sa mohloli se sa hlaheng hantle skrineng seo ho buuoang ka sona.
Ho khothaletsoa ho etsa bonnete ba hore mecha ea litaba e tsoang ho Transmitter e nang le tloaelo ea EDID e bonts'a ka nepo lipontšong tse ling ka har'a sistimi.
Ka kopo hlokomela: ho bohlokoa hore ho be le skrini se le seng feela viewho Transmitter nakong eo EDID Copy e etsahalang.

Web-GUI - Baamoheli

Fesetere ea kakaretso ea Receiver e bonts'a ho fetaview ea lisebelisoa tsohle tsa Receiver tse hlophisitsoeng ka har'a sistimi, ka bokhoni ba ho nchafatsa sistimi kamoo ho hlokahalang.

Likarolo tsa leqephe la kakaretso la Receiver li kenyelletsa:

1. ID - nomoro ea ID (sephetho) e sebelisetsoa ho laola tsamaiso ea Multicast ha ho sebelisoa liforomo tsa taolo ea motho oa boraro.
2. Lebitso - lebitso la Baamoheli (hangata sesebelisoa se hoketsoeng ho Moamoheli) se abeloa mabitso a kamehla a tloaelehileng, ke hore, Receiver 001 joalo-joalo. Mabitso a Receiver a ka lokisoa ka har'a leqephe la "Device Setup" (ka har'a Wizard), kapa ka ho tobetsa konopo ea 'Actions' bakeng sa yuniti e le 'ngoe (sheba leqephe le latelang).
3. Aterese ea IP - aterese ea IP e abetsoeng Moamoheli nakong ea tlhophiso.
4. Aterese ea MAC - e bonts'a aterese ea MAC ea Moamoheli (LAN 1 port).
5. Dante MAC - e bonts'a aterese ea MAC ea boema-kepe ba LAN2 moo khokahano e ikemetseng ea Dante e sebelisoang. Ka kopo, sheba konopo e tšoailoeng LAN2 Mode Help bakeng sa tlhaloso e eketsehileng mabapi le ho arola marang-rang a Video le Dante.
6. Sehlahisoa - se khetholla sehlahisoa se sebelisoang se hokahaneng le sistimi.
7. Firmware - e bonts'a mofuta oa firmware o kentsoeng hajoale ho Receiver. Bakeng sa tlhaiso-leseling e batsi mabapi le ho ntlafatsa firmware, ka kopo bona karolo ea 'Update Firmware'.
8. Boemo - bo bonts'a boemo ba Marang-rang / Offline ba Moamoheli e mong le e mong. Haeba sehlahisoa se bonahala se le 'Offline', hlahloba khokahanyo ea li-unit ho switjha ea netweke.
9. Mohloli - o bontša mohloli oa hona joale o khethiloeng ho Moamoheli e mong le e mong. Ho fetola khetho ea mohloli, khetha Transmitter e ncha ho tsoa khethong e theohang.
10. Qeto ea Scaler - fetola qeto ea sephetho u sebelisa sekala sa video se hahelletsoeng kahare ho Multicast Receiver. Scaler e khona ho phahamisa le ho theola lets'oao la video le kenang. Thuso ea mantlha e ka fumanoa khethong ea scaler ka ho tobetsa konopo e ka holimo ho leqephe e ngotsoeng 'Scaling Help'. Liqeto tse fumanehang tse fumanehang bakeng sa IP50HD, IP2xxUHD, le IP3xxUHD litsamaiso kaofela lia fapana.
11. HDR On/Off - e bulela HDR (High Dynamic Range) e tsamaisanang - sebelisa feela ka li-skrini tse tšehetsang HDR.
12. Mosebetsi - o khetholla Moamoheli e le sehlahisoa se ikemetseng (Matrix) kapa e le karolo ea Lerako la Video. Khetho ena e ntšoa ha Moamoheli e se karolo ea lethathamo la Lebota la Video.
13. Mokhoa oa LAN2: moo IP250UHD kapa IP350UHD e sebelisoang teng, hoa khoneha ho arola molumo oa Dante bakeng sa ho hokahana le marang-rang a fapaneng a Dante ho tloha mona. Moo IP200UHD kapa IP300UHD e sebelisoang (ha ho na khokahano ea Dante), khetho ena ha e khethoe. Sheba tafole e fetileng (leqephe la TX) bakeng sa khetho ea LAN (ha e fumanehe ho firmware ea ACM bakeng sa IP50HD) .
14. Liketso - sheba leqephe le latelang bakeng sa karohano ea likhetho tse ling tsa liketso.
15. Thuso ea ho Eketsa - o ka fumana thuso ea mantlha mabapi le khetho ea ho holisa ka ho tobetsa konopo e kaholimo ho leqephe e ngotsoeng 'Scaling Help'.
16. Hlasimolla - tlanya mona ho nchafatsa tlhahisoleseling eohle ea hajoale ho lisebelisoa tse ka har'a sistimi.

Web-GUI – Baamoheli – Liketso

Konopo ea 'Liketso' e lumella hore likarolo tse tsoetseng pele tsa Moamoheli li fihlellehe le ho hlophisoa.
Lebitso - le ka lokisoa ka ho kenya lebitso lebokoseng la mongolo la mofuta oa mahala.
Ka kopo hlokomela: sena se lekanyelitsoe ho litlhaku tse 16 ka bolelele, 'me litlhaku tse ling li kanna tsa se ke tsa tšehetsoa.
Apdeita ID - ID e fetisetsoa ho linomoro tsa ho qetela tse 3 tsa aterese ea IP ea sesebelisoa ke hore Receiver 3 e fuoa aterese ea IP ea 169.254.6.3. ID ea ntlafatso e lumella ID / IP ea yuniti hore e lokisoe.
Sistimi ea Sisteme - fetola boholo ba sistimi ka Moamoheli.
Mokhoa oa HDCP - khetha pakeng tsa: HDCP Bypass, Force 2.2, kapa Force 1.4.
Mokhoa oa ARC - ka kopo bona tlhaloso ea ARC leqepheng le latelang.
Ho switjha ka potlako - ho fetola video pele, ka molumo, IR, RS-232, USB / KVM kaofela ka mor'a moo. Ka kopo elelloa: ha phepelo ea video e ka fetoha kapele, likarolo tse ling tsa phepelo (ke hore, audio, IR joalo-joalo) li tla nka nako e teletsana hore li fihlelle.
CEC Pass-through (ON / OFF) - e lumella hore CEC (Consumer Electronic Command) e romelloe ka tsamaiso ea Multicast. Ka kopo hlokomela: CEC le eona e tlameha ho lumelloa ho Transmitter.
Video Output (ON / OFF) - bulela / TIMA sephetho sa video sa HDMI - se hloka ho ts'oarana ka letsoho ha u bulela.
Video Mute (ON / OFF) - e khutsisa tlhahiso ea HDMI (e etsa skrine e ntšo), ho boloka letsoho la HDMI.
Ho Emisa Video (ON / OFF) - e emisa video ea HDMI le molumo o kentsoeng foreiming ha taelo e fanoa. Ho tima ho nka phepelo ea HDMI ho tloha moo taelo e fanoeng.
Video Auto On (ON / OFF) - e tima tlhahiso ea video ha ho sa phatlalatsoe mecha ea litaba. Output e tla bulela hape ha media e qala.
Likonopo tsa Panel e ka Pele (ON / OFF) - likonopo tsa Channel tse ka pele ho Moamoheli e mong le e mong li ka koaloa ho emisa ho switjha ho sa batleheng.
Front Panel IR (ON / OFF) - e nolofalletsa kapa e thibela Moamoheli ho amohela litaelo tsa IR.
Ho Screen Sehlahisoa sa ID (On / Off / On 90 Seconds) - Bulela / Tlosa ID ea Sehlahisoa sa skrineng. Ho bulela ID ea Sehlahisoa sa On Screen ho bontša ID (ke hore ID 001) ea Moamoheli e manehiloeng holim'a ponts'o e hoketsoeng.
Front Panel Power LED Flash (On / Off / On 90 Seconds) - e tla khantša matla a LED karolong e ka pele ea Moamoheli ho thusa ho tseba sesebelisoa.
Pontšo ea Panel e ka Pele (Ho Buletsoe / Metsotsoana e 90) - sebelisa sena ho nolofalletsa / ho tima pontšo e ka pele ho Moamoheli. Pontšo ea sesebelisoa e tla tima ka mor'a metsotsoana e 90 ho fihlela e tsosoa.
Potoloho - fetola setšoantšo ka: 0, 90, 180 le 270 degrees.
Otlolla - e fetola boholo ba setšoantšo ho 'Otlolla' karolong ea pontšo, kapa 'Maintain Aspect Ratio' ea mohloli oa sesebelisoa sa mohloli.
Litlhophiso tsa serial / Preview / Reboot / Replace / Tlosa ho Project / Fektheri Reset - litlhophiso tse ts'oanang le tse hlalositsoeng leqepheng la Transmitter pejana.

Web-GUI - Tsela e tsitsitseng ea Letšoao

ACM e khona ho tsamaisa mekhoa e ikemetseng ea matšoao a latelang ka sistimi ea Multicast:

• Video
• Molumo (ka kopo hlokomela: tsamaiso e ikemetseng ea molumo ha e fumanehe lenaneong la IP50HD. ARC e fumaneha feela ho IP300UHD le IP350UHD mekhoa)
• Infrared (IR)
• RS-232
• USB / KVM
• CEC (Consumer Electronic Command) - e holofalitsoe ke kamehla. Ho bulela, ka kopo etsa joalo ho TX / RXAction tab ka yuniti ka 'ngoe

Sena se lumella letšoao le leng le le leng hore le behoe ho tloha sehlahisoa se seng sa Multicast ho ea ho se seng 'me se se ke sa angoa ke ho fetoha ha video ho tloaelehileng. Sena se ka ba molemo bakeng sa taolo ea IR, CEC kapa RS-232 ea lihlahisoa tšimong u sebelisa Multicast system ho atolosa litaelo tsa taolo ho tsoa ho tharollo ea taolo ea motho oa boraro, kapa ho bahlahisi IR remote control.
Ka kopo hlokomela: ntle le IR le RS-232, tsela e ka lokisoa feela ho tloha ho Receiver ho ea ho sehlahisoa sa Transmitter. Le hoja ho tsamaisa litsela ho ka etsoa ka tsela e le 'ngoe feela, puisano e na le mahlakore a mabeli pakeng tsa lihlahisoa tse peli.

Ka kamehla, ho tsamaisa: Video, Audio, IR, Serial, USB le CEC ho tla latela khetho ea Transmitter ea unit ea Receiver.
Ho khetha tsela e tsitsitseng, sebelisa lebokose le theoha bakeng sa e 'ngoe le e 'ngoe ea lipontšo / Baamoheli ho lokisa tsela.
Hang ha ACM e kenyelitsoe tsamaisong ea Multicast, bokhoni ba ho laola IR (eseng IR pass-through) le likonopo tse ka pele tsa Multicast Receivers li nolofalloa ka ho sa feleng. Sena se koetsoe tšebetsong ea Liketso e ka har'a leqephe la kakaretso la Moamoheli (sheba leqephe le fetileng).
Routing e ka hlakoloa ka ho khetha 'Latela' ka nako efe kapa efe ho tsoa ho web- GUI. Lintlha tse ling mabapi le Fixed Routing li ka fumanoa ka ho tobetsa 'Fixed Routing Help'.
Bakeng sa litaelo tse tsoetseng pele tsa ho tsamaisa video, Audio, IR, RS-232, USB le CEC ha u sebelisa sistimi ea taolo ea mokha oa boraro, ka kopo sheba Tokomane e arohaneng ea API (e fumanehang ho khoasolla ho tsoa ho Blustream. websebaka).

Molumo o tsitsitseng oa Routed
ACM e lumella hore karolo ea molumo oa lets'oao la HDMI e tsamaisoe ka boikemelo ho pholletsa le sistimi ea Blustream Multicast. Tlas'a ts'ebetso e tloaelehileng, molumo o kentsoeng ka har'a lets'oao la HDMI o tla tsamaisoa ka lets'oao la video le amanang le ona ho tloha ho Transmitter ho ea ho Receiver/s.
Bokhoni bo tsitsitseng ba ho tsamaisa molumo oa ACM bo lumella hore pina ea molumo e tsoang mohloling o mong e kenngoe molaong o mong oa video oa Transmitters.

IR e tsitsitseng
Sebopeho se tsitsitseng sa IR se lumella sehokelo se tsitsitseng sa bi-directional IR pakeng tsa lihlahisoa tsa 2x Multicast. Letšoao la IR le tsamaisoa feela lipakeng tsa RX e hlophisitsoeng ho ea ho TX, kapa TX ho ea ho lihlahisoa tsa TX. Sena se ka ba molemo bakeng sa ho romela IR ho tsoa ho tharollo ea taolo ea batho ba boraro (ELAN, Control4, RTi, Savant joalo-joalo) le ho sebelisa tsamaiso ea Blustream Multicast e le mokhoa oa ho atolosa IR ho pontšo kapa sehlahisoa se seng tsamaisong. Sehokelo sa IR se mahlakore a mabeli kahoo se ka khutlisoa ka tsela e fapaneng ka nako e le 'ngoe.

Lihokelo:
Motlakase oa taolo ea motho oa boraro IR, kapa moamoheli oa Blustream IR, o hokahantsoe le sokete ea IR RX ho Multicast Transmitter kapa Receiver.
Lemoha ka kopo: O tlameha ho sebelisa Blustream 5V IRR Receiver kapa Blustream IRCAB (3.5mm stereo ho ea ho mono 12V ho isa ho 5V IR converter cable). Lihlahisoa tsa Blustream Infrared kaofela ke 5V 'me HA LI tsamaellane le bahlahisi ba bang Litharollo tsa Infrared.

Blustream 5V IRE1 Emitter e hokahane le sokete ea IR OUT ho Multicast Transmitter kapa Receiver.
Li-Emitters tsa Blustream IRE1 & IRE2 li etselitsoe taolo e hlakileng ea IR ea lisebelisoa.
(IRE2 - Dual Eye Emitter e rekisoa ka thoko)

USB / KVM e tsitsitseng e tsitsitseng
Sebopeho se tsitsitseng sa USB se lumella sehokelo se tsitsitseng sa USB pakeng tsa Multicast Receiver/s le Transmitter. Sena se ka ba molemo bakeng sa ho romella matšoao a KVM pakeng tsa boemo ba basebelisi ho PC e bohareng, seva, CCTV DVR / NVR joalo-joalo.

Litlhaloso tsa USB:

Tlhaloso ea USB	USB2.0 (ka kopo hlokomela: ha e tšehetse litefiso tse felletseng tsa phetiso ea data ea USB2.0)
Katoloso	Ho feta IP, theknoloji ea Hybrid redirection
Sebaka	100m
Distance Ext.	ka Ethernet switch hub
Lisebelisoa tsa Max Downstream	5
Topology	1 ho ea ho 1 1 ho tse ngata feela (USBoIP) 1 ho tse ngata ka nako e le 'ngoe empa palo e lekanyelitsoeng ea lisebelisoa tsa USB (USBoIP)* 1 ho tse ngata ka nako e le 'ngoe Keyboard / Mouse (K/MoIP)
Ts'ebetso ea USB R/W *	R: 69.6 Mbps W: 62.4 Mbps

* Reference Benchmark: Bala / Ngola USB ho SATA HD ntle le Multicast system R: 161.6 Mbps / W: 161.6 Mbps

E Tsitsitseng Routed CEC
CEC kapa Consumer Electronic Command ke HDMI e kenyellelitsoeng protocol e lumellang hore litaelo li romeloe ho tloha sesebelisoa se seng sa HDMI ho ea ho se seng bakeng sa liketso tse bonolo tse kang: Matla, Bolumo jj.
Lenaneo la Blustream Multicast le lumella mocha oa CEC ka har'a khokahanyo ea HDMI pakeng tsa lihlahisoa tse peli (mohloli le teba) ho buisana le e mong ho sebelisa protocol ea CEC.
CEC e tlameha ho lumelloa (sena ka linako tse ling se bitsoa 'HDMI Control') ho sesebelisoa sa mohloli le sesebelisoa sa pontšo e le hore tsamaiso ea Multicast e buisane le litaelo tsa CEC holim'a sehokelo sa Multicast.
Ka kopo hlokomela: Sistimi ea Blustream Multicast e tla tsamaisa protocol ea CEC feela pepeneneng. Ho eletsoa ho etsa bonnete ba hore lisebelisoa tsa mohloli le sink li tla buisana ka katleho pele li itlama ho mofuta ona oa taolo le Multicast. Haeba ho ka ba le bothata ka puisano ea CEC lipakeng tsa mohloli le ho teba ka kotloloho, sena se tla bonoa ha se romelloa ka sistimi ea Multicast.

ARC & Optical Audio Return (IP300UHD & IP350UHD feela)
Lihlahisoa tsa IP300UHD le IP350UHD li na le bokhoni ba ho nka HDMI ARC, HDMI eARC, kapa khokahanyo ea molumo oa Optical ho tloha ponts'o e hokahantsoeng le Receiver, 'me e abela sena ho khutlela ho Optical output ho unit Transmitter e fumanehang hole le tsamaiso. Ka kopo hlokomela, karolo ena ha e fumanehe sehlahisoa sefe kapa sefe sa Multicst mme e lekanyelitsoe ho max 5.1ch audio.
Tsamaiso ea sebopeho sa Audio Return e laoloa ho tloha tlase ho "Fixed Routing tab" ea sebopeho sa ACM210:

ARC e Koetsoe ka ho sa feleng. Ho nolofaletsa ARC ke mehato e 'meli:

1. Khetha tsela u sebelisa lebokose le theoha ho hokahanya Transmitter le Moamoheli
2. Tsamaea ho tab ea ACM Receiver, tobetsa konopo ea Action bakeng sa RX e hokahantsoeng le Transmitter. Khetha hore na ke tsela efe ea molumo e sebelisoang ho tsoa ho "ARC Mode" e theohang (ka kopo hlokomela: CEC e tlameha ho lumelloa bakeng sa HDMI ARC):

Web-GUI - Tlhophiso ea Lebota la Video

Blustream Multicast Receivers e ka hlophisoa hore e be karolo ea Lebota la Video ka har'a ACM. Sistimi efe kapa efe ea Multicast e ka ba le mefuta e fihlang ho 9x ea Lebota la Video ea libopeho le boholo bo fapaneng. Ho tloha ho 1x2 ho isa ho 9x9.

Ho hlophisa mofuta o mocha oa Lebota la Video, ea ho "Video Wall Configuration" ebe o tobetsa konopo e ngotsoeng 'New Video Wall' joalo ka ha e tšoailoe kaholimo ho skrini. Thuso ka ho theha lethathamo la Video Wall e ka fumanoa ka ho tobetsa konopo e tšoailoeng 'Video Wall Help'.
Ka kopo hlokomela: Li-Receivers tsa Multicast tse tla sebelisoa bakeng sa Lebota la Video li ne li lokela hore ebe li hlophisitsoe e le Baamoheli ka bomong pele ba feta ntlha ena. Ke mokhoa o motle ho ba o se o rehile Li-Receivers tsa Multicast bakeng sa boiketlo ba tlhophiso ke hore "Video Wall 1 - Top Left".

Kenya tlhahisoleseling e nepahetseng fensetereng ea pop-up ho reha lebitso ebe u khetha palo ea liphanele ka holimo le ka holimo ka har'a pokello ea Video Wall. Hang ha lintlha tse nepahetseng li kentsoe skrineng, khetha 'Create' ho theha template ea Wall Wall ka har'a ACM.

Leqephe la menyetla bakeng sa lethathamo le lecha la Video Wall le na le likhetho tse latelang:

1. Khutlela - khutlela leqepheng le fetileng bakeng sa ho theha Lebota la Video le lecha.
2. Ntlafatsa Lebitso - fetola lebitso le fuoeng lethathamo la Lebota la Video.
3. Litlhophiso tsa skrine - tokiso ea matšeliso a bezel / lekhalo la li-skrini tse sebelisoang. Sheba leqephe le latelang bakeng sa lintlha tse ling mabapi le litlhophiso tsa Bezel.
4. Sehlopha sa Configurator - ho na le likhetho tsa ho khona ho etsa litlhophiso tse ngata (kapa 'li-presets') bakeng sa mofuta o mong le o mong oa Lebota la Video ka har'a sistimi ea Multicast. Ho hlophisoa / ho hlophisoa esale pele ho lumella Lebota la Video hore le kenngoe ka mekhoa e mengata, ke hore, ho kopanya lipalo tse fapaneng tsa skrini hammoho ho theha mabota a boholo bo fapaneng ka har'a sehlopha se le seng.
5. Fetolela OSD - Bulela / Tlosa OSD (Ho skrineng sa skrine). Ho fetola OSD On ho tla bonts'a nomoro ea ID (ke hore ID 001) ea Multicast Receiver ponts'ong e 'ngoe le e 'ngoe e hokahantsoeng le Moamoheli e le sekoaelo ho mecha ea litaba e ajoang. Ho tima OSD Off ho tlosa OSD. Sena se lumella ho khetholla habonolo ha lipontšo ka har'a Lebota la Video nakong ea tlhophiso le ho seta.

Abela Pontšo / Moamoheli:
ACM e tla theha setšoantšo sa pono ea Lebota la Video leqepheng. Sebelisa metsu e theohang skrineng se seng le se seng ho khetha sehlahisoa se loketseng sa Multicast Receiver se hoketsoeng skrineng ka seng se lethathamong la Video Wall.

Web-GUI - Tlhophiso ea Lebota la Video - Litlhophiso tsa Bezel
Leqephe lena le lumella matšeliso bakeng sa boholo ba bezel e 'ngoe le e' ngoe ea skrine ka har'a Lebota la Video, kapa ho seng joalo bakeng sa likheo tse teng lipakeng tsa skrini. Ka nako e sa lekanyetsoang, tsamaiso ea Multicast e tla kenya li-bezels tsa "Video Wall" skrineng "pakeng" ea setšoantšo ka kakaretso (ho arola setšoantšo). Sena se tla bolela hore li-bezel tsa li-skrini ha li lule "ka holim'a" karolo efe kapa efe ea setšoantšo. Ka ho fetola bophara ba Outer Width (OW) vs View Bophara (VW), le Outer Height (OH) vs View Bophahamo (VH), li-bezel tsa skrine li ka fetoloa hore li lule "holimo" ho setšoantšo se hlahang.

Li-unit kaofela ke 1,000 ka ho sa feleng - ena ke nomoro e ikhethileng. Ho khothalletsoa ho sebelisa litekanyo tsa li-skrini tse sebelisoang ka mm. Ho lefella boholo ba bezel ea li-skrini tse sebelisoang, fokotsa View Bophara le View Bophahamo bo loketseng ho lefella boholo ba li-bezel. Hang ha sephetho sa litokiso tse hlokahalang se se se fumanoe, konopo ea 'Copy Bezels to All' e ka sebelisoa ho kopitsa litlhophiso ho ponts'o ka 'ngoe. Tobetsa 'Apdate' ho netefatsa litlhophiso le ho khutlela skrineng se fetileng sa Update Video Wall.
Konopo ea 'Bezel Help' e bula fensetere ea pop-up ka tataiso ea tokiso le tokiso ea litlhophiso tsena.

Web-GUI - Tlhophiso ea Lebota la Video - Sehlopha sa Configurator
Hang ha sehlopha sa Video Wall se entsoe, se ka hlophisoa bakeng sa likhetho tse fapaneng tsa ponts'o. Video Wall Configurator e lumella hore ho etsoe li-presets bakeng sa ho tsamaisa Lebota la Video ho ikamahanya le lihlopha tse fapaneng tsa litšoantšo ho pholletsa le sehlopha. Tobetsa konopo ea 'Sehlopha Configurator' ho tsoa skrineng sa Update Video Wall.

Khetho ka har'a menu ena ka tsela e latelang:

1. Khutlela - khutlela leqepheng la Update Video Wall ntle le ho etsa liphetoho ho seta.
2. Configuration Dropdown - tsamaea lipakeng tsa litlhophiso / li-presets tse fapaneng tse neng li setiloe pele bakeng sa pokello ea Lebota la Video. Ka kamehla, 'Configuration 1' e tla kengoa bakeng sa Lebota la Video le ntseng le etsoa le ho hlophisoa lekhetlo la pele.
3. Ntlafatsa Lebitso - seta lebitso la tlhophiso / setaele pele, ke hore, 'Single Screens' kapa 'Video Wall'. Ka kamehla, mabitso a tlhophiso / a seng a setiloe a tla hlophisoa joalo ka 'Configuration 1, 2, 3…' ho fihlela e fetoha.
4. Eketsa Configuration - e eketsa tlhophiso / setaele se secha bakeng sa Lebota la Video le khethiloeng.
5. Hlakola - e tlosa tlhophiso e khethiloeng hajoale.

Sehlopha se Abela:
Ho arola ka lihlopha ho lumella Lebota la Video hore le sebelisoe ka mekhoa e mengata, ke hore, ho theha Mabota a Video a boholo bo fapaneng ka har'a lethathamo le leholoanyane la Video Wall. Sebelisa khetho e theohang skrineng ka seng ho theha Sehlopha ka har'a Lebota la Video:

Sheba leqephe le latelang bakeng sa tlhaloso e eketsehileng mabapi le hore na sehlopha se seholo sa Video Wall se ka ba le lihlopha tse ngata tse hlophisitsoeng ka hare.
Web-GUI - Tlhophiso ea Lebota la Video - Sehlopha sa Configurator
Bakeng sa mohlalaampLe: Lebota la Video la 3 × 3 le ka ba le litlhophiso / li-presets tse ngata:

1. Bakeng sa ho hlahisa 9x mefuta e fapaneng ea mehloli ea mecha ea litaba - e le hore li-skrini tsohle li sebetse li ikemetse le skrine e 'ngoe le e' ngoe e bontšang mohloli o le mong - e sa hlophisoa (tlohela li-dropdown tsohle e le 'E le Mong').
2. E le 3 × 3 Wall Video - e bonts'a mohloli o le mong oa mecha ea litaba ho pholletsa le li-skrini tsohle tsa 9 (li-skrini tsohle li hloka ho khethoa e le 'Sehlopha A').
3. Bakeng sa ho bonts'a setšoantšo sa 2 × 2 sa Lebota la Video ka har'a kakaretso ea 3 × 3 ea Lebota la Video. Sena se ka ba le likhetho tse fapaneng tsa 4x:
   - Ka 2 × 2 ka holimo leqeleng la 3 × 3, e nang le li-skrini tsa 5x ka ho le letona le tlase (khetha 2 × 2 ka holimo le letšehali e le Sehlopha sa A se nang le li-skrini tse ling tse behiloeng e le 'Single') - sheba mohlala.ample ka tlase…
   - Ka 2 × 2 ka holimo ka ho le letona la 3 × 3, e nang le li-skrini tsa motho ka mong tsa 5x ka ho le letšehali le ka tlase (khetha 2 × 2 ka holimo ka ho le letona e le Sehlopha sa A se nang le li-skrini tse ling tse behiloeng e le 'Single').
   - Ka 2 × 2 e ka tlaase ho le letšehali la 3 × 3, e nang le li-skrini tsa motho ka mong tsa 5x ka ho le letona le holimo (khetha 2 × 2 ka tlaase ho le letšehali e le Sehlopha sa A se nang le li-skrini tse ling tse behiloeng e le 'Single').
   - Ka 2 × 2 karolong e ka tlaase ea 3 × 3, e nang le li-skrini tsa motho ka mong tse 5x ka ho le letšehali le holimo (khetha 2 × 2 ka tlaase ho le letona e le Sehlopha sa A se nang le li-skrini tse ling tse behiloeng e le 'Single').

Le exampLeha ho le joalo, ho tla ba le tlhokahalo ea ho theha litlhophiso tse fapaneng tsa 6 bakeng sa lethathamo la Lebota la Video, ho abela lihlopha tsa lihlopha ho Sehlopha ho sebelisa ho theoha ha khetho. Litlhophiso / Lihlopha li ka rehoa bocha joalo ka ha ho hlokahala ho sebelisoa khetho ea 'Update Name' skrineng sa Sehlopha sa Configuration.
Litlhophiso tse ling li ka etsoa ka li-skrini tse abetsoeng e le lihlopha. Sena se lumella mehloli e mengata ea video ho ba viewed ka nako e ts'oanang 'me e tla hlaha e le Lebota la Video ka har'a Lebota la Video. Example na le mabota a mabeli a boholo bo fapaneng a Video ka har'a sehlopha sa 3 × 3. Sebopeho sena se na le lihlopha tse 2:

Web-GUI - Tlhophiso ea Lebota la Video
Hang ha Lebota la Video le se le bōpiloe, le rehelletsoe ka nepo, 'me lihlopha / li-presets li abetsoe, Lebota la Video le hlophisitsoeng le ka etsoa. viewed ho tsoa leqepheng la mantlha la Tlhophiso ea Lebota la Video:

Litlhophiso / li-presets tse entsoeng ka har'a sistimi li se li tla hlaha ka har'a leqephe la lihlopha tsa Video Wall. Leqephe la Video Wall Configuration le dumella hore sehlopha se fetolwe.
Konopo ea 'Refresh' e hlakisa leqephe la hajoale le litlhophiso tsa sehlopha sa Video Wall se ntseng se hlahisoa.
Sena se thusa haholo ha o leka litaelo tsa tlhophiso ea Lebota la Video ho tsoa ho sistimi ea motho oa boraro.
Ka kopo, bona litaelo tsa API tse tsoetseng pele bakeng sa tšebeliso le litsamaiso tsa taolo ea motho oa boraro bakeng sa Taolo ea Video Wall, Configuration switching le khetho ea Sehlopha e fumanehang ho khoasolla ho tsoa ho Blustream. websebaka.

Web-GUI - Basebelisi

ACM e na le bokhoni ba hore Basebelisi ka bomong ba kene ho web-GUI ea Multicast system le ho fihlella likarolo tsa motho ka mong / libaka tsa sistimi, bakeng sa taolo e felletseng ea sistimi eohle ea Multicast, kapa bakeng sa taolo e bonolo ea hore na ke mohloli ofe o shebelloang libakeng tse khethiloeng feela. Bakeng sa thuso ea ho theha Basebelisi ba bacha, tobetsa konopo e tšoailoeng 'Basebelisi Thuso'.
Ho seta mosebelisi e mocha, tobetsa 'Mosebelisi e Mocha' kaholimo ho skrini:

Kenya lintlha tse ncha tsa mosebelisi fensetereng e hlahang ebe o tobetsa 'Etsa' hang ha o qetile:

Mosebelisi e mocha o tla hlaha leqepheng la menyu ea Basebelisi e itokiselitseng ho fihlella / tumello ea ho hlophisoa:

Ho khetha litumello tsa Mosebelisi ka mong, nchafatsa phasewete ea Mosebelisi, kapa ho tlosa Mosebelisi ho sistimi ea Multicast, tobetsa konopo ea 'Liketso'.

Khetho ea Litumello e fana ka monyetla oa ho khetha hore na ke Li-Transmitters kapa Receivers tseo Mosebelisi a ka li bonang ka har'a maqephe a bona a taolo (Drag & Drop Control, le Video Wall Control). Ka mabokose ohle a tšoailoeng haufi le Transmitter kapa Receiver e 'ngoe le e' ngoe, Mosebelisi a ka khona peleview 'me u fetole tsamaiso eohle. Haeba Mosebelisi a khona ho laola skrineng / moamoheli a le mong feela, joale u se ke oa hlahloba Baamoheli ba bang kaofela. Ka mokhoa o ts'oanang, haeba Mosebelisi a sa tlameha ho fuoa monyetla oa ho fumana sesebelisoa se le seng (kapa ho feta), Li-Transmitters tsena ha lia lokela ho hlahlojoa.
Moo ho nang le Lebota la Video tsamaisong ea Multicast, Mosebelisi o tla hloka phihlello ho Baamoheli TSOHLE ba amanang le bona hore ba tsebe ho fumana taolo ea switching ea Video Wall. Haeba Mosebedisi a sa kgone ho fihlella Baamohedi kaofela, Lebota la Video le ke ke la hlaha leqepheng la Taolo ya Lebota la Video.

Hang ha litumello tsa mosebelisi li se li khethiloe, tlanya 'Apdate' ho sebelisa litlhophiso.
Ka kopo hlokomela: molemong oa ho emisa phihlello e sa sireletsehang ho web sehokelo (ke hore ha se na phasewete), ak'haonte ea 'Moeti' e tlameha ho hlakoloa kamora hore mosebelisi e mocha a khone ho fumana mehloli / li-skrini tse sebetsang. Ka tsela ena, mosebelisi ofe kapa ofe oa sistimi o hloka ho kenya phasewete ho fumana taolo ea sistimi.

Web-GUI – Litlhophiso

Leqephe la Litlhophiso la ACM le tla fana ka phetisoview ea litlhophiso tse akaretsang, le li-setting tsa marang-rang tsa taolo / video tsa yuniti e nang le bokhoni ba ho fetola le ho ntlafatsa yuniti ka nepo.

'Projeke e Hlakileng' e tlosa li-Transmitters, Receivers, Mabota a Video le Basebelisi tse entsoeng ho tsoa morerong oa hajoale. file e fumanehang ka har'a ACM. Netefatsa ka ho khetha 'E'.
Ka kopo hlokomela: Wizate e Ncha ea Setupo sa Morero e tla hlaha ka mor'a ho sebelisa mosebetsi oa 'Hlakola Project'. Na morero o lokela ho boloka file ha e e-s'o bōptjoe pele ho hlakola morero, ho ke ke ha khoneha ho tsosolosa tsamaiso ka mor'a ntlha ena.

Khetho ea 'Reset ACMxxx' e lumella tse latelang:

1. Khutlisa Sisteme ho ea ho ea feme ea mantlha (ntle le li-setting tsa Netweke)
2. Khutlisa marang-rang ho li-setting tsa kamehla (ntle le li-setting tsa Sistimi)
3. Seta bocha litlhophiso tsohle tsa Sisteme le Netweke ho khutlela fekthering ea kamehla

Tlas'a litlhophiso tse akaretsang, khetho ea 'Update' e lumella tse latelang:

1. Bulela / Tlosa taolo ea IR ho thusa / ho tima tlhahiso ea IR ea ACM ho amohela litaelo tsa IR ho tsoa ho tharollo ea mokha oa boraro.
2. Ntlafatsa nomoro ea boema-kepe ea Telnet eo boema-kepe ba taolo ea ACM bo buisanang ka eona. Nomoro ea boema-kepe ea kamehla e sebelisitsoeng ke port 23 e tla sebelisoa bakeng sa bakhanni bohle ba semmuso ba taolo ea mokha oa boraro oa Blustream.
3. Nchafatsa RS-232 Baud Rate ea khokahanyo ea DB9 ea ACM hore e lumellane le processor ea taolo ea mokha oa boraro. Sekhahla sa kamehla sa Baud se sebelisitsoeng ke: 57600.

Liaterese tsa IP tsa likou tse peli tsa RJ45 ho ACM li ka ntlafatsoa ka liaterese tsa IP, Subnet le Gateway. Sebelisa konopo ea 'Apdate' bakeng sa Network Network kapa Video Network ho nchafatsa tlhahisoleseling bakeng sa likou tse hlokahalang. The Control Port e ka hlophisoa ho DHCP ka ho khetha 'On':

BOHLOKOA: Ho lokisa Aterese ea IP Network Network ho tsoa ho 169.254.xx ho tla emisa puisano pakeng tsa ACM le Multicast Transmitters le Receivers tse lokiselitsoeng esale pele. Le hoja ACM e ka tlosoa sebakeng se khothalelitsoeng, liaterese tsa IP tsa Li-Transmitters le Li-Receivers TSOHLE li tla hloka ho lokisoa ho mofuta o tšoanang oa IP ho netefatsa khokahanyo le taolo ea Multicast system. Ha e khothalletsoe.

Web-GUI - Ntlafatsa Firmware

Leqephe la Update Firmware le lumella ho ntlafatsa firmware ea:

• Sehlopha sa ACM
• Multicast Transmitter le Receiver diyuniti

Lemoha ka kopo: liphutheloana tsa firmware bakeng sa lihlahisoa tsa ACM, Multicast Transmitter le Receiver ke tsa motho ka mong. Ho khothaletsoa hore ntlafatso ea firmware e phetheloe feela ho tsoa komporong ea komporo kapa ea laptop e kentsoeng ka thata marang-rang.
Ho ntlafatsa ACM:
Khoasolla Firmware ea ACMxxx file (.bin/.img) ho tsoa ho Blustream websaeteng khomphuteng ea hau.

Tobetsa konopo e ngotsoeng 'Kenya ACMxxx Firmware'

Khetha [ACMxxx].bin/.img file e se e jarollotsoe komporong ea hau bakeng sa ACM. The file e tla kenya ka bo eona ho ACM e nkang pakeng tsa metsotso e 2-5 ho qeta. Leqephe le tla qala hape leqepheng la Hula le ho Lahlela hang ha le felile.

Leqephe la Update Firmware le boetse le sebelisetsoa ho ntlafatsa firmware ea Blustream Transmitters kapa Receivers.
Leqephe le lumella hore li-Transmitter tse ngata, kapa, li-Receiver li ntlafatsoe (ke hore, Li-Receiver kaofela hang-hang, kapa, li-Transmitter kaofela hang-hang - eseng ka bobeli ka nako e le 'ngoe).
Mofuta oa hajoale oa firmware oa Multicast Transmitters le Receivers o ka khoasolloa ho tsoa ho Blustream websebaka.

Ho kenya firmware files, tobetsa konopo e tšoailoeng 'Kenya TX kapa RX Firmware', ebe 'Khetha Files'. Hang ha firmware e nepahetse (.bin) file e khethiloe khomphuteng, firmware e tla kenya ho ACM.
Ka kopo hlokomela: karolo ena ea ntlafatso ha e kenye firmware ho lihlopha tsa TX kapa RX, e kenya feela ho ACM e loketseng ho romelloa ho TX kapa RX.

BOHLOKOA: Se ke oa koala kapa oa suthela hole le phalliso ha e ntse e tsoela pele ho qoba ho lahleheloa ke data ea firmware nakong ea ho fetisetsoa ho ACM.
Qetellong ea firmware fileHa e ntse e kenngoa ho ACM, tsebiso e tla hlaha skrineng ho fana ka maikutlo a katleho ea ho kenya.
Ho phethela ntlafatso ea firmware ea Multicast Transmitter, kapa ea Receiver units, tobetsa konopo e ngotsoeng 'Apdate' haufi le Transmitter kapa Receiver e amehang.
Lemoha ka kopo: hoa khoneha ho ntlafatsa li-Transmitters, kapa Receivers ka nako e le 'ngoe (IP200UHD / IP250UHD / IP300UHD / IP350UHD). Bakeng sa IP50HD, ntlafatso ea firmware e ka sutumelletsoa ho likarolo tse ngata tsa TX kapa RX ka nako e le 'ngoe.
Re khothaletsa hore kamehla o hokahane ka thata ho marang-rang ha li-unit tsa ntlafatso ea firmware ho fokotsa kotsi ea likhokahano ho likhokahano tse se nang mohala.

BOHLOKOA: Se ke oa hakolla likarolo tsa ACM kapa TX / RX ha ts'ebetso ea ntlafatso e ntse e tsoela pele ho qoba ho lahleheloa ke data ea firmware nakong ea ho fetisetsoa ho sesebelisoa sa Transmitter / Receiver.

Nchafatsa Password

Phasewete ea Admin bakeng sa ACM e ka ntlafatsoa ho password ea alpha-numeric ka ho kenya lintlha tse ncha khethong ena ea pop-up. Tobetsa 'Update Password' ho netefatsa:

BOHLOKOA: Hang ha password ea Admin e fetotsoe, e ke ke ea fumanoa ke Mosebelisi. Haeba password ea Admin e lebetsoe kapa e lahlehile, ka kopo ikopanye le setho sa sehlopha sa Blustream Technical Support se tla khona ho thusa ho khutlisa litokelo tsa Tsamaiso ea yuniti. Sheba liaterese tsa lengolo-tsoibila ka tlase:

RS-232 (Serial) Tsela

Sistimi ea Multicast e na le mekhoa e 'meli ea ho laola matšoao a taelo ea RS-232:
Mofuta oa 1 - Tsela e tsitsitseng:
Tsela e tsitsitseng e tsitsitseng bakeng sa ho aba litaelo tsa RS-232 tsa litsela tse peli pakeng tsa Multicast Transmitter ho ea ho Receivers e le 'ngoe e mengata (Fixed Routing). Tsela e tsitsitseng e ka sala e tsitsitse pakeng tsa lihlahisoa tse peli kapa ho feta e le khokahanyo e sa feleng bakeng sa phetisetso ea data ea taolo ea RS-232, sena se lokisoa ho sebelisoa menu ea Fixed Routing ea ACM.
Mofuta oa 2 - Mokhoa oa Baeti:
E lumella khokahanyo ea RS-232 ea sesebelisoa ho romelloa ka marang-rang a IP (taelo ea IP / RS-232 ho ea ho RS-232 kantle). Mofuta oa 2 oa Moeti o fa litsamaiso tsa taolo ea motho oa boraro bokhoni ba ho romella taelo ea RS-232 kapa IP ho ACM le taelo ea RS-232 hore e romeloe ho tsoa ho Moamoheli kapa Transmitter ka lebaka leo. IP ena ho pontšo ea RS-232, e lumella tsamaiso ea tsamaiso ea boraro hore e be le taolo ea lisebelisoa tse ngata tsa RS-232 joalokaha ho na le Baamoheli le Li-Transmitters, ho tloha khokahanyo ea marang-rang ho ea ho ACM.
Ho na le mekhoa e 'meli ea ho nolofalletsa Mofuta oa 2 - Mokhoa oa Baeti:

1. Ho sebelisa ACM web-GUI ho tsoa ho li-tab tsa Transmitters le Receiver Action.
2. Ka taelo e behiloeng joalo ka ha ho hlalositsoe ka tlase. Taelo ea ho lokisa khokahano ke: IN/OUT xxx SG ON

Khokahano ea Mokhoa oa Baeti oa RS-232 ho tsoa ho Sistimi ea Taolo ea Mokha oa Boraro:
Ha o sebelisa Mokhoa oa Baeti ho lisebelisoa tse ngata ka har'a sistimi, re khothaletsa ho bulela le ho tima Moeti oa Baeti ha ho hlokahala. Lebaka ke hobane taelo ea serial e rometsoeng ho ACM e tla fetisetsoa ho lisebelisoa TSOHLE tse nang le Mokhoa oa Baeti o lumelletsoeng.

1. Ho bula khokahano ea Moeti oa Baeti lipakeng tsa ACM le IPxxxUHD-TX kapa yuniti ea RX taelo e latelang e tlameha ho romelloa ka IP kapa RS-232:
   

   INxxxGUEST	Hokela ho TX xxx ka Mokhoa oa Baeti ho tsoa ho ACM
   TS'OAXxxGUEST	Hokela ho RX xxx ka Mokhoa oa Baeti ho tsoa ho ACM
   ExampLe:	Transmitter ten ke ID 010, e bolelang 'IN010GUEST' e tla lumella hore litaelo tsa Serial / IP li romelloe lipakeng tsa ACM le Transmitter 10.

2. Hang ha khokahano e thehiloe, litlhaku life kapa life tse rometsoeng ho tsoa ho ACM li tla fetisetsoa ho Transmitter kapa Receiver e hokahantsoeng, 'me ka tsela e fapaneng.
3. Ho koala khokahano romella taelo: CLOSEACMGUEST

Litlhaloso

ACM200 & ACM210:

• Boema-kepe ba Ethernet: 2x LAN RJ45 sehokelo (ts'ehetso ea 1x PoE)
• RS-232 serial port: 1x DB-9 e tšehali
• RS-232 & I/O port: 1x 6-pin Phoenix sehokelo (e boloketsoe tšebeliso ea nako e tlang)
• Boema-kepe ba IR: 1x 3.5mm jeke ea stereo
• Litekanyo (W x D x H ): 96mm x 110mm x 26mm
• Boima ba ho romella (Kit): 0.6kg
• Mocheso o sebetsang: 32°F ho isa ho 104°F (0°C ho isa ho 40°C)
• Mocheso oa polokelo: -4°F ho isa ho 140°F (-20°C ho isa ho 60°C)

Litaba tsa Sephutheloana

• 1 x ACM200 / ACM210
• 1 x IR ea taolo ea cable - 3.5mm ho 3.5mm stereo ho ea mono cable
• 1 x 6-pin sehokelo sa phoenix
• 1 x Kit ea ho kenya

Tlhokomelo

Hloekisa yuniti ena ka lesela le bonolo, le omeletseng. Le ka mohla u se ke ua sebelisa joala, pente e tšesaane kapa benzene ho hloekisa yuniti ena.

Litaelo tsa Blustream Infrared
Blustream e thehile 16x input & 16x tlhahiso ea litaelo tsa IR tse lumellang khetho ea mohloli ho fihla ho 16x Transmitters ho fihla ho 16x Receivers. Tsena li fapane le lisebelisoa tsa ho fetola mohloli tse rometsoeng ho Multicast Receiver.
Bakeng sa lisebelisoa tse kholo ho feta lisebelisoa tsa mohloli oa 16x, ka kopo sebelisa RS-232 kapa TCP/IP control.
Bakeng sa database e felletseng ea litaelo tsa Multicast IR, ka kopo etela Blustream webLeqephe la sebaka sa marang-rang bakeng sa sehlahisoa sefe kapa sefe sa Multicast, tobetsa konopo ea "Drivers & Protocols", 'me u fetele foldareng e bitsoang "Multicast IR Control".

RS-232 le Litaelo tsa Telnet

Sistimi ea Blustream Multicast e ka laoloa ka serial le TCP / IP. Ka kopo, sheba leqephe la likhokahano tsa RS-232 ho elella qalong ea bukana ena bakeng sa litlhophiso le ho penya. Bakeng sa ACM200 le ACM210, ho na le Litokomane tsa API tse fumanehang ho khoasolla ho tsoa ho Blustream. webSebaka sa marang-rang se koahelang litaelo tsohle tse ka romelloang tse ka romelloang ka TCP/ IP kapa Serial ho li-unit.
Liphoso Tse Tloaelehileng

• Ho khutlisa koloi - Mananeo a mang ha a hloke hore koloi e khutlele moo e meng e ke keng ea sebetsa ntle le haeba e rometsoe ka kotloloho kamora mohala. Tabeng ea software e itseng ea Terminal letšoao se sebedisoang ho phethisa kgutliso ya kariki. Ho ipapisitse le lenaneo leo u sebelisang lets'oao lena mohlomong le fapane. Li-ex tse lingamphore lits'ebetso tse ling tsa taolo li kenyelle \r kapa 0D (ka hex).
• Libaka - ACM200 e ka sebetsa le rona ntle le libaka. E mpa feela e iphapanyetsa tsona. E ka boela ea sebetsa ka lipalo tse 0 ho isa ho tse 4. mohlala: 1 e tšoana le 01, 001, 0001.
  - Tsela eo khoele e lokelang ho shebahala ka eona ka tsela e latelang OUT001FR002
  - Mokhoa oa khoele o ka shebahala joang haeba libaka li hlokoa ke sistimi ea taolo: OUT{Space}001{Space}FR002
• Baud Rate kapa litlhophiso tse ling tsa serial protocol ha lia nepahala

Lemoha ka kopo: palo e kholo ea Li-Transmitters (yyy) le Receivers (xxx) = lisebelisoa tse 762 (001-762)
– Baamoheli (lipoelo) = xxx
– Li-transmitters (litšenyo) = yyy
– Scaler Output = rr
– EDID Input setting = zz
– Baud Rate = br
- Likou tsa GPIO / liphetho = gg

Bakeng sa lenane le felletseng la litaelo tsohle tsa API tsa ACM200 le ACM210, ka kopo bona Tokomane e arohaneng ea Advanced Control Module API e hatisitsoeng ho Blustream. websebaka.

Maikutlo a boemo samples
Taelo: STATUS
Maikutlo a STATUS a fana ka phetisoview ea marang-rang, ACM e hokahane le:
==========================================================
Lebokose la Taolo ea IP ACM200 Boemo ba Boemo
Phetolelo ea FW: 1.14
Matla IR Baud
Ka 57600
Ho EDID IP NET/Sig
001 DF009 169.254.003.001 Bula /Ka
002 DF016 169.254.003.002 Bula /Ka
E tsoa ho IP NET/HDMI Res Mode
001 001 169.254.006.001 On /Off 00 VW02
002 002 169.254.006.002 On /Off 00 VW02
LAN DHCP IP Gateway SubnetMask
01_POE Off 169.254.002.225 169.254.002.001 255.255.000.000
02_CTRL Off 010.000.000.225 010.000.000.001 255.255.000.000
Telnet LAN01 MAC LAN02 MAC
0023 34:D0:B8:20:4E:19 34:D0:B8:20:4E:1A
==========================================================
Taelo: HO TSOA xxx STATUS
Maikutlo a OUT xxx STATUS a fana ka phetisoview ea tlhahiso (Receiver: xxx). Ho kenyelletsa: firmware, mode, routing e tsitsitseng, lebitso joalo-joalo.
==========================================================
IP Control Box ACM200 Output Info
Phetolelo ea FW: 1.14
Out Net HPD Ver Mode Res Rotate Lebitso
001 On Off A7.3.0 VW 00 0 Receiver 001
Fast Fr Vid/Aud/IR_/Ser/USB/CEC HDR MCas
Ka 001 001/004/000/000/002/000 Ka
CEC DBG Otlolla IR BTN LED SGEn/Br/Bit
Bulehile ka On 3 Off /9/8n1
KE MAC
Static 00:19:FA:00:59:3F
IP GW SM
169.254.006.001 169.254.006.001 255.255.000.000
==========================================================
Maikutlo a boemo samples
Taelo: IN xxx STATUS
Ho fedileview ea ho kenya (Transmitter: xxx). Ho kenyelletsa: firmware, audio, lebitso joalo-joalo.
==========================================================
Lebokose la Taolo ea IP ACM200 Input Info
Phetolelo ea FW: 1.14
Ka Net Sig Ver EDID Aud MCast Lebitso
001 Ho A7.3.0 DF015 HDMI Ho Transmitter 001
CEC LED SGEn/Br/Bit
Ka 3 Off /9/8n1
KE MAC
Static 00:19:FA:00:58:23
IP GW SM
169.254.003.001 169.254.003.001 255.255.000.000
==========================================================
Taelo: Boemo ba VW
Boemo ba VW bo tla bonts'a maikutlo ohle a boemo ba VW bakeng sa lihlopha tsa Video Wall tsamaisong. Litlhophiso tse ling tsa Video Wall li tla ba le maikutlo a boemo ba motho ka mong ke hore 'VW 2 STATUS'.
==========================================================
IP Control Box ACM200 Video Wall Info
Phetolelo ea FW: 1.14
Lebitso la VW Col Row CfgSel
02 02 02 02 Lerako la Video 2
OutID
001 002 003 004
Lebitso la CFG
01 Tlhophiso 1
Sehlopha sa FromIn Screen
A 004 H01V01 H02V01 H01V02 H02V02
02 Tlhophiso 2
Sehlopha sa FromIn Screen
A 002 H02V01 H02V02
B 001 H01V01 H01V02
==========================================================

Ho rarolla bothata ka ACM

Leka ho sebelisa litaelo tse ka tlase ho hlahloba ACM haeba ho ka ba le mathata ha u sebelisa k'homphieutha ho laola ACM.

1. Hokela komporo ka kotloloho ho ACM Control Port ka thapo ea CAT
2. Khomphuta e tlameha ho ba boemong bo lekanang le ba khokahanyo ea LAN 1 ho sesebelisoa sa ACM (control network) kaha sena se tla etsisa taolo e tsoang ho tsamaiso ea motho oa boraro (ke hore Control4, RTI, ELAN joalo-joalo). Ka kopo, sheba litaelo tse ka morao bukeng ena bakeng sa 'Ho fetola lintlha tsa IP tsa komporo ea hau'.
3. Bula cmd.exe lenaneo (Command prompt). Sebelisa sesebelisoa sa ho batla komporong haeba u sa tsebe hantle hore na e fumaneha hokae.
4. Kenya mola oa taelo o latelang 'Telnet 192.168.0.225'
   Fesetere e latelang e tla hlahisoa ho netefatsa hore o kene ho ACM ka katleho:

Phoso ea Telnet
Haeba molaetsa oa phoso: 'telnet ha e tsejoe e le taelo ea kahare kapa kantle, lenaneo le sebetsang kapa batch file', kenya Telnet komporong ea hau.
Ha e khone ho bona likou tsa LAN tsa ACM
Haeba o sa khone ho hokahana (ping) likoung tsa ACM, hokela ka kotloloho ho switch ea marang-rang eseng ka router ea modem ea DHCP ho etsa liteko.
E khona ho ping sehlahisoa empa e sa kenelle ka khokahano ea Telnet
Haeba o sa khone ho hokahana (ping) likoung tsa ACM, hokela ka kotloloho ho switch ea marang-rang eseng ka router ea modem ea DHCP ho etsa liteko.

Fetola Litlhophiso tsa Khomphutha ea Hau - Ho nolofalletsa TFTP & Telnet

Pele o sebelisa Blustream ACM Firmware apdeite PC programme o tlameha ho kenya tšebetsong likarolo tsa TFTP le Telnet komporong ea hau. Sena se finyelloa ka ho sebelisa mehato e latelang:

1. Ho Windows, ea ho Start -> Control Panel -> Mananeo le Likarolo
2. Sekrineng sa Mananeo le Likarolo, khetha Bulela kapa ho tima likarolo tsa Windows sebakeng sa ho sesa se ka letsohong le letšehali.
3. Hang ha fensetere ea likarolo tsa Windows e se e tletse, tsamaisetsa fatše 'me u netefatse hore "TFTP client" le "Telnet Client" li khethiloe ka bobeli.
4. Hang ha sebaka sa tsoelo-pele se tlala 'me pop up e nyamela, moreki oa TFTP o tla buleha.

Ho beha aterese ea IP e tsitsitseng ho Windows 7, 8, 10 kapa 11
E le hore u khone ho buisana le ACM komporo ea hau e tlameha ho qala ka ho ba maemong a IP a tšoanang le a ACM Control kapa Video LAN port. Ka linako tsohle likou li na le aterese ea IP e latelang:

Laola boema-kepe ba LAN	192.168.0.225
Boema-kepe ba LAN ea video	169.254.1.253

Litaelo tse latelang li u lumella ho fetola aterese ea IP ea komporo ea hau e u lumellang hore u buisane le lihlahisoa tsa Blustream Multicast.

1. Ho Windows, thaepa 'network and sharing' ka har'a lebokose la ho batla
2. Ha skrine ea Network le Sharing e bula, tobetsa ho 'Fetola litlhophiso tsa adaptara'.
3. Tobetsa ka ho le letona ho adaptara ea hau ea Ethernet ebe u tobetsa Properties
4. Fesetereng ea Local Area Connection Properties, totobatsa Internet Protocol Version 4 (TCP/IPv4) ebe o tobetsa konopo ea Properties.
5. Khetha konopo ea seea-le-moea Sebelisa aterese e latelang ea IP ebe u kenya IP e nepahetseng, Subnet mask, le Default gateway e tsamaellanang le ho seta marang-rang a hau.
6. Tobetsa OK 'me u koale li-skrini tsohle tsa marang-rang. Aterese ea hau ea IP e se e lokisitsoe.

Lintlha…

www.blustream.co.uk
www.blustream.com.au
www.blustream-us.com

Litokomane / Lisebelisoa

BLUSTREAM ACM200 Multicast Advanced Control Module [pdf] Bukana ea Mosebelisi ACM200 Multicast Advanced Control Module, ACM200, Multicast Advanced Control Module, Advanced Control Module, Control Module, Module

Litšupiso

• Bukana ea Mosebelisi