Blustream Multicast ACM200 / ACM210
Advanced Control Module
Cov neeg siv phau ntawvHloov kho 1.3 - Lub Yim Hli 2023

Ua tsaug rau kev yuav khoom cov khoom no Blustream
Rau kev ua tau zoo thiab kev nyab xeeb, thov nyeem cov lus qhia no ua tib zoo ua ntej txuas, ua haujlwm lossis kho cov khoom no. Thov khaws phau ntawv no rau yav tom ntej siv.
Surge tiv thaiv ntaus ntawv pom zoo
Cov khoom no muaj cov khoom siv hluav taws xob rhiab heev uas yuav raug puas tsuaj los ntawm hluav taws xob spikes, surges, hluav taws xob poob siab, xob laim ntaus, thiab lwm yam. Kev siv cov txheej txheem tiv thaiv surge yog pom zoo kom tiv thaiv thiab txuas ntxiv lub neej ntawm koj cov cuab yeej. Daim ntawv ceeb toom kev nyab xeeb thiab kev ua haujlwm
Tsis txhob hloov lossis siv lwm yam khoom siv hluav taws xob uas tsis yog cov khoom lag luam pom zoo PoE lossis cov khoom siv hluav taws xob Blustream pom zoo.
Tsis txhob disassemble lub ACM200 / ACM210 chav tsev yog vim li cas. Ua li ntawd yuav ua rau lub chaw tsim khoom tsis muaj kev lees paub.

Taw qhia

Peb Multicast faib platform tso cai rau kev faib tawm ntawm HDMI cov yeeb yaj kiab dhau ntawm kev tswj xyuas network. ACM200 & ACM210 Advanced Control Modules (lub npe hu ua 'ACM' los ntawm qhov taw tes no mus rau hauv phau ntawv qhia no) tso cai rau kev tswj hwm thib peb ntawm Blustream Multicast system siv TCP / IP, RS-232 thiab IR.
ACM suav nrog a web interface module rau kev tswj thiab teeb tsa ntawm Multicast system thiab nta 'Drag & Drop' qhov chaw xaiv nrog kev tshaj tawm ua ntejview thiab ywj pheej routing ntawm Video, Suab (tsis nyob rau IP50HD systems), IR, RS232, thiab USB / KVM. Pre-built Blustream khoom tsav tsheb yooj yim Multicast khoom installation thiab negate qhov xav tau kev nkag siab ntawm complex network infrastructures.
Phau Ntawv Qhia Tus Neeg Siv no npog cov yam ntxwv thiab kev ua haujlwm rau ob qho tib si ACM200 thiab ACM210 Advanced Control Module cov khoom lag luam los ntawm Blustream.
ACM200 tam sim no siv rau IP50HD, IP200UHD thiab IP250UHD tshuab nkaus xwb.
ACM210 tuaj yeem siv rau tus kheej IP50HD, IP200UHD, IP250UHD, IP300UHD thiab IP350UHD systems.
Thov nco ntsoov: IP200UHD thiab IP250UHD tshuab yog sib cuam tshuam. IP300UHD thiab IP350UHD tshuab yog sib cuam tshuam.
IP50HD yog ib qho kev sib koom ua ke thiab tsis tuaj yeem cuam tshuam nrog ob qho tib si saum toj no ntawm Multciast systems.

Nta

• Web interface module rau configuration thiab tswj ntawm Blustream Multicast system
• Intuitive 'Drag & Drop' qhov chaw xaiv nrog video ua ntejview feature rau active saib xyuas ntawm qhov system xwm txheej
• Advanced teeb liab tswj rau kev ywj pheej ntawm kev ua yeeb yaj kiab, Suab, IR, RS-232, thiab USB / KVM
• Auto system configuration
• 2x RJ45 LAN kev sib txuas rau txuas cov network uas twb muaj lawm rau Multicast video faib network, ua rau:
  - Kev ua haujlwm zoo dua qub raws li kev sib txuas hauv network tau sib cais
  - Tsis xav tau kev teeb tsa network siab heev
  - Kev ywj pheej IP chaw nyob rau ib qho kev sib txuas LAN
  - Tso cai yooj yim TCP / IP tswj ntawm Multicast system
• RS-232 kev koom ua ke rau kev tswj hwm ntawm Multicast system
• IR kev koom ua ke rau kev tswj hwm ntawm Multicast system
• PoE (Power dua Ethernet) rau lub hwj chim ACM los ntawm PoE hloov
• Hauv zos 12V fais fab mov (yeem) yuav tsum hloov tsis txhawb PoE
• Kev them nyiaj yug rau iOS thiab Android App tswj (nrhiav: "Ntxhais thiab Tso Kev Tswj")
• 3rd tog neeg tsav tsheb muaj rau feem ntau tswj hom

Lus Cim:
Lub Blustream Multicast system faib HDMI cov yeeb yaj kiab hla kev tswj hwm network kho vajtse. Nws tau qhia tias Blustream Multicast cov khoom txuas nrog rau kev hloov pauv hauv lub network ywj pheej (lossis VLAN) txhawm rau tiv thaiv kev cuam tshuam tsis tsim nyog, lossis txo cov teeb liab kev ua haujlwm vim lwm yam khoom siv network bandwidth.
Thov nyeem thiab nkag siab cov lus qhia hauv phau ntawv no thiab xyuas kom meej tias lub network hloov tau teeb tsa kom raug ua ntej txuas cov khoom lag luam Blustream Multicast. Ua tsis tiav yuav ua rau muaj teeb meem nrog kev teeb tsa ntawm lub kaw lus thiab kev ua yeeb yaj kiab.

Vaj Huam Sib Luag - ACM200 & ACM210

1. RS-232 tswj chaw nres nkoj - txuas mus rau lwm tus neeg tswj cov cuab yeej rau kev tswj hwm ntawm Multicast system siv RS232.
2. MCU Upgrade toggle - siv thaum hloov kho MCU firmware nkaus xwb. Tawm hauv qhov qub txeeg qub teg rau kev ua haujlwm txheem.
3. Pib dua - luv xovxwm reboots ACM, ntev nias (10 vib nas this) Hoobkas defaults ACM.
4. IO Qib hloov - tseg rau yav tom ntej siv.
5. IO Level phoenix - tseg rau yav tom ntej siv.
6. Video LAN (PoE) - txuas mus rau lub network hloov uas Blustream Multicast Cheebtsam txuas nrog.
7. Tswj LAN chaw nres nkoj - txuas mus rau lub network uas twb muaj lawm uas tus neeg sab nrauv tswj qhov system nyob rau. Lub Chaw Tswj LAN yog siv rau Telnet / IP tswj ntawm Multicast system. Tsis yog PoE.
8. IR Ctrl (IR input) - 3.5mm lub tso suab tso suab. Txuas mus rau lwm tus neeg tswj qhov system yog siv IR raws li txoj kev xaiv ntawm kev tswj hwm Multicast system. Thaum siv cov suav nrog 3.5mm lub tso suab rau mono cable, xyuas kom meej cov kev taw qhia cable yog lawm.
9. IR – kho IR voltage theem ntawm 5V lossis 12V input rau IR Ctrl.
10. Lub zog LED taw qhia
11. Chaw nres nkoj fais fab - siv 12V 1A DC adapter (muag nyias) yog tias tsis siv PoE network hloov.

ACM Control Ports

ACM cov chaw nres nkoj sib txuas lus nyob rau ntawm ob lub vaj huam sib luag kawg thiab suav nrog cov kev sib txuas hauv qab no:

Kev sib txuas:
A. TCP/IP - rau Multicast system tswj (RJ45 connector)
B. Infrared (IR) Input * - 3.5mm lub tso suab tso suab - rau Multicast I / O switching tswj nkaus xwb
C. RS-232 - rau Multicast system tswj / RS-232 hla dhau (DB9)
* Thov nco ntsoov: ACM200 tuaj yeem siv nrog 5V thiab 12V IR kab tshuab. Thov xyuas kom meej tias qhov hloov pauv (nyob ib sab ntawm IR chaw nres nkoj) raug xaiv kom raug rau qhov tshwj xeeb ntawm IR kab tawm tswv yim los ntawm kev tswj hwm.
TCP/IP:
Blustream ACM tuaj yeem tswj tau ntawm TCP / IP. Rau cov npe tag nrho ntawm cov txheej txheem thov saib cov ntawv cais 'API Commands' uas tuaj yeem rub tawm los ntawm Blustream webqhov chaw. Ib qho 'txoj kev ncaj nraim' RJ45 thaj ua rau thaj yuav tsum tau siv thaum txuas nrog lub network hloov.
Tswj chaw nres nkoj: 23
Default IP: 192.168.0.225
Lub Npe Default: Us
Default Password: 1 2 3 4
Thov nco ntsoov: thawj zaug nkag mus rau ACM, yuav tsum tau sau tus password tshiab. Nws tsis tuaj yeem rov pib dua qhov no yam tsis tau rov pib dua ACM chav tsev. Thov xyuas kom meej tus password tshiab tau sau tseg thiab khaws cia rau yav tom ntej siv.
RS-232 / Serial:
ACM tuaj yeem tswj tau ntawm serial siv DB9 connector. Default settings hauv qab no. Rau cov npe tag nrho ntawm cov txheej txheem thov saib cov ntawv cais 'API Commands' uas tuaj yeem rub tawm los ntawm Blustream webqhov chaw.
Baud tus nqi: 57600
Data Bit: 8-ntsis
Parity: Tsis muaj
Nres Ntsis: 1-ntsis
Flow Control: Tsis muaj
Tus nqi baud rau ACM tuaj yeem hloov kho siv lub web-GUI, lossis los ntawm kev tshaj tawm cov lus txib hauv qab no ntawm RS-232 lossis Telnet:
RSB x : Teem RS-232 Baud Rate rau X bps
Qhov twg X = 0: 115200
1:57600 ib
2:38400 ib
3:19200 ib
4:9600 ib

ACM Control Chaw nres nkoj - IR Control

Multicast system tuaj yeem tswj tau siv IR hauv zos tswj los ntawm lwm tus neeg tswj qhov system. Qhov kev xaiv tsuas yog muaj nyob rau thaum siv IR tswj hauv zos - cov yam ntxwv siab heev ntawm ACM xws li video phab ntsa, suab embedding thiab lwm yam. tuaj yeem ua tiav siv RS-232 lossis TCP / IP tswj.
Blustream tau tsim 16x input & 16x tso zis IR commands tso cai xaiv qhov chaw mus txog 16x Multicast Transmitters txog li 16x Multicast Receivers. Rau cov tshuab loj dua 16x qhov khoom siv, RS-232 lossis TCP / IP tswj yuav tsum tau.

ACM tau tshaj 5V thiab 12V IR khoom. Thaum ACM raug siv kom tau txais IR input rau hauv IR CTRL chaw nres nkoj, qhov chaw nyob sib ze yuav tsum toggled kom haum rau IR vol.tage kab ntawm kev xaiv tswj qhov system ua ntej kev sib txuas.
Thov nco ntsoov: muab Blustream IR cabling yog tag nrho 5V
3.5mm Stereo rau Mono Cable - IR-CAB (nrog)
Blustream IR Control cable 3.5mm Mono rau 3.5mm Stereo rau kev sib txuas cov neeg sab nrauv tswj kev daws teeb meem rau Blustream cov khoom.
Tau tshaj 12V IR cov khoom thib peb.
Thov nco ntsoov: Cable yog directional raws li qhia

IR Receiver - IRR - lub tso suab 3.5mm jack (yeem)
Blustream 5V IR receiver kom tau txais IR teeb liab thiab xa tawm los ntawm Blustream cov khoom

Tus pin - IR-CAB - lub tso suab 3.5mm jack:

Tus pin - IR-CAB - mono 3.5mm jack:

ACM Network Kev Sib Txuas

ACM ua tus choj ntawm kev tswj hwm network thiab video network kom ntseeg tau tias cov ntaub ntawv taug kev ntawm ob lub network tsis sib xyaw. ACM yuav tsum tau txuas ntawm CAT cable raws li cov kev cai sib txuas lus.

Web-GUI Qhia

Cov web-GUI ntawm ACM tso cai rau kev teeb tsa tag nrho ntawm lub kaw lus tshiab, nrog rau kev saib xyuas tsis tu ncua thiab tswj cov kab ke uas twb muaj lawm los ntawm ib qho web portal.
ACM tuaj yeem nkag mus rau hauv ib qho kev sib txuas hauv internet xws li: ntsiav tshuaj, xov tooj ntse thiab laptops uas nyob rau tib lub 'Control' network. ACM tau xa nrog qhov chaw nyob IP zoo li qub (raws li hauv qab no), thiab tsis tau teeb tsa nrog DHCP qhib.

Nkag mus / Nkag mus

Peb xav kom lub computer / laptop txuas ncaj qha mus rau Control chaw nres nkoj ntawm ACM rau thawj configuraiton ntawm ib tug tshiab system. Raws li tau hais dhau los, ACM tau xa nrog qhov chaw nyob IP zoo li qub, tsis yog DHCP. Muaj cov lus qhia ntawm yuav ua li cas hloov qhov chaw nyob IP zoo li qub ntawm lub khoos phis tawj / lub laptop mus rau tom qab ntawm phau ntawv no.
Txhawm rau nkag mus, qhib a web browser (xws li Safari, Firefox, MS Edge thiab lwm yam) thiab mus rau lub neej ntawd IP chaw nyob ntawm ACM uas yog: 192.168.0.225

Nplooj ntawv kos npe yog nthuav tawm ntawm kev sib txuas rau ACM. Lub neej ntawd admin password yog: 1 2 3 4
ACM xav tau tus password tshiab los teeb tsa rau Tus Thawj Coj hauv thawj zaug nkag. Nws tsis tuaj yeem rov pib dua qhov no yam tsis tau rov pib dua ACM chav tsev. Thov xyuas kom meej tus password tshiab tau sau tseg thiab khaws cia rau yav tom ntej siv. Thaum tus password tshiab tau tsim, ACM yuav xav tau qhov no ib zaug ntxiv kom nkag mus rau hauv cov ntawv qhia zaub mov ntawm chav tsev.

New Project Set-up Wizard

Nyob rau thawj zaug nkag ntawm ACM, ib qho teeb tsa Wizard rau kev teeb tsa txhua yam ntawm Multicast system yuav raug nthuav tawm. Qhov no tau raug tsim los ua kom ceev cov kev teeb tsa tshiab raws li tag nrho lub neej ntawd / Multicast Transmitters & Receivers tuaj yeem txuas nrog lub network hloov nyob rau tib lub sijhawm, thaum tsis ua rau muaj teeb meem IP thaum lub sijhawm teeb tsa. Qhov no ua rau lub kaw lus nyob rau hauv uas tag nrho cov Cheebtsam tau txais thiab ua raws lub npe thiab IP chaw nyob npaj rau kev siv cov txheej txheem.

Lub ACM Set-up Wizard tuaj yeem raug muab tso tseg los ntawm nias 'Kaw'. Thov nco ntsoov tias lub kaw lus yuav tsis raug teeb tsa ntawm lub sijhawm no, tab sis tuaj yeem txuas ntxiv los ntawm kev mus saib 'Project' zaub mov. Yog ib qhov Project File twb muaj lawm (piv txwv li hloov ib qho ACM ntawm qhov chaw uas twb muaj lawm), qhov no tuaj yeem raug xa tuaj los ntawm kev siv qhov kev cawmdim .json file los ntawm txhaj 'Import Project'.
Nyem 'Next' mus txuas ntxiv teeb:

Yog hais tias nyob rau ntawm lub sij hawm no tus xaiv Network kho vajtse tsis configured rau siv nrog ib tug Blustream Multicast system, nyem rau ntawm lub hyperlink 'network hloov teeb qhia' mus rau lub hauv paus. webnplooj ntawv uas muaj cov Network Hloov Cov Lus Qhia.
Ib example schematic daim duab rau kev sib txuas ntawm ACM tuaj yeem nkag tau los ntawm txhaj rau qhov hyperlink cim 'daim duab'. Qhov no yuav ua kom lub ACM txuas nrog raug rau qhov dav Multicast system ua ntej qhov teeb tsa Wizard pib. Thaum cov kev sib txuas ntawm ACM tau lees paub, nyem 'Tom ntej'.
Thaum lub sijhawm siv ib txwm, ACM yuav tshuaj xyuas cov xwm txheej hloov tshiab thiab tshuaj ntsuam-tshaj tawm ntawm cov xov xwm taug kev los ntawm lub kaw lus. Kev xaiv tsa ntawm cov ntaub ntawv no tas li muaj kev cuam tshuam nrog cov tshuab loj (75+ cov ntsiab lus kawg). Tom ntej no stage ntawm lub configuration yog pre-txhais qhov loj ntawm qhov project. Cov kev xaiv ntawm no yog:
0-75 Cov khoom
75+ Cov khoom
Qhov kev teeb tsa no tuaj yeem hloov kho yav tom ntej yog tias qhov system loj tuaj.
Nyem rau ntawm lub pob cuam tshuam los xaiv qhov system loj:

Muaj ob txoj hauv kev ntxiv cov Transmitter thiab Receiver tshiab rau lub kaw lus:
Txoj Kev 1: Txuas ALL Transmitter thiab Receiver units rau lub network hloov. Txoj kev no yuav teeb tsa txhua yam khoom siv nrog lawv tus kheej IP chaw nyob raws li hauv qab no:
Transmitters:
Tus thawj Transmitter yuav muab tus IP chaw nyob ntawm 169.254.3.1. Tom ntej no Transmitter yuav muab tus IP chaw nyob ntawm 169.254.3.2, thiab hais txog….
Thaum tus IP ntau ntawm 169.254.3.x tau sau (254 units), software yuav pib muab tus IP chaw nyob ntawm 169.254.4.1, thiab lwm yam ...
Thaum tus IP ntau ntawm 169.254.4.x tau sau lub software yuav pib muab tus IP chaw nyob ntawm 169.254.5.1, thiab ntxiv mus txog 169.254.4.254
Txais:
Thawj Tus Txais yuav raug muab tus IP chaw nyob ntawm 169.254.6.1. Tus txais tom ntej yuav raug muab tus IP chaw nyob ntawm 169.254.6.2, thiab lwm yam….
Thaum tus IP ntau ntawm 169.254.6.x tau sau (254 units) software yuav pib muab tus IP chaw nyob ntawm 169.254.7.1, thiab lwm yam ...
Thaum tus IP ntau ntawm 169.254.7.x tau sau lub software yuav pib muab tus IP chaw nyob ntawm 169.254.8.1, thiab ntxiv mus txog 169.254.8.254
Thaum ua tiav, cov khoom siv yuav tsum raug txheeb xyuas manually - hom no yuav pib muab cov khoom lag luam IP chaw nyob thiab ID rau txhua lub cuab yeej txuas nrog lub network hloov pauv (tsis yog los ntawm qhov chaw nres nkoj hloov).
Txoj Kev 2: txuas txhua Blustream Multicast Transmitter thiab Receiver rau lub network ib-los-ib. Tus Txheej Txheem Wizard yuav teeb tsa cov chav nyob raws li lawv tau txuas nrog / pom. Txoj kev no tso cai rau kev tswj hwm qhov sib txuas ntawm qhov chaw nyob IP thiab tus lej ID ntawm txhua yam khoom - Cov Transmitter / Receiver units tuaj yeem sau npe raws li.
… saib nplooj ntawv tom ntej rau HDCP hom lus piav qhia
HDCP Hom: Blustream Multicast Receivers cia li ntxiv qhov cuam tshuam HDCP mus rau cov kwj tawm (tsis hais seb lub hauv paus ntaus ntawv puas muaj HDCP encoded rau nws cov kwj tawm).
HDCP Hom radial nyees khawm tso cai rau HDCP raug yuam, lossis ua raws li kev ua raws cai.
Thaum siv cov khoom lag luam (xws li cov cuab yeej siv VC) qhov twg tsis muaj HDCP encoded mus rau qhov tso zis ntawm lub teeb liab, thiab cov khoom siv uas tsis yog HDCP tau raug siv rau ntawm RX / tso zis (ie capture software), peb xav kom teeb tsa lub kaw lus. mus rau 'Bypass'.
Hovering tus nas hla lub cim "cov ntaub ntawv" me me (qhov tseem ceeb hauv cov duab hauv qab no hauv xiav) muab cov lus piav qhia hauv GUI.
Thov nco ntsoov: 'Bypass' hom tsis "dawb" HDCP los ntawm HDMI teeb liab. Yog tias nyob rau hauv 'Bypass' hom, HDCP1.x teeb liab yuav ua rau HDCP1.x tau dhau los ntawm qhov system. Yog tias tsis muaj HDCP ntawm lub teeb liab, Multicast units yuav tsis ntxiv HDCP yog nyob rau hauv 'Bypass'.
Thaum txoj kev teeb tsa los teeb tsa lub kaw lus tau xaiv, ntaus lub 'Start Scan' khawm (highlighted hauv qab).
ACM yuav tshawb nrhiav Blustream Multicast units tshiab ntawm lub network, thiab tseem yuav tshawb nrhiav cov cuab yeej tshiab mus txog thaum lub sijhawm xws li:
– Lub ntsuab 'Stop Scan' khawm yog nias
- Lub pob xiav 'Tom ntej' yog nias kom ua tiav qhov teeb tsa Wizard ib zaug pom tag nrho cov chav nyob

Raws li cov chav nyob tshiab tau pom los ntawm ACM, cov chav nyob yuav populate rau cov kab uas muaj feem cuam tshuam rau Transmitters lossis Receivers.
Nws raug nquahu kom sau cov npe ntawm tus kheej ntawm qhov no.
Cov chav Multicast yuav raug teeb tsa nrog cov ntaub ntawv IP chaw nyob tshiab ntawm lub sijhawm no, thiab yuav rov pib dua.
Thaum tag nrho cov chav nyob tau pom thiab teeb tsa, nyem 'Stop Scan', tom qab ntawd 'Tom ntej'.
Nplooj ntawv teeb tsa tso cai rau Transmitters thiab Receivers muaj npe raws li. EDID thiab Scaler nqis rau tus kheej Transmitters lossis Receivers tuaj yeem teeb tsa raws li qhov xav tau. Rau kev pab nrog EDID thiab Scaler nqis, nyem cov nyees khawm uas cim 'EDID Pab' lossis 'Scaling Help'.

Cov yam ntxwv ntawm cov cuab yeej teeb tsa nplooj ntawv suav nrog:

1. Lub npe ntawm cov cuab yeej - thaum lub sij hawm teeb tsa lub Transmitters / Receivers tau txais kev tso npe lub npe xws li Transmitter 001 thiab lwm yam. Transmitter / Receiver cov npe tuaj yeem hloov kho los ntawm kev ntaus ntawv hauv lub thawv sib txuas.
2. EDID - kho tus nqi EDID rau txhua qhov Transmitter (qhov chaw). Qhov no yog siv los thov cov kev daws teeb meem tshwj xeeb video thiab suab rau cov khoom siv los tso tawm. Kev pab cuam yooj yim nrog kev xaiv EDID tuaj yeem tau txais los ntawm nias lub pob cim 'EDID Pab'. Thov nco ntsoov, lub neej ntawd EDID rau Blustream cov cuab yeej yog: 1080p, 2ch suab.
3. View (tsuas yog transmitters) - qhib cov nram qab no pop-up:Qhov no pop-up qhia ib daim duab ua ntejview ntawm cov xov xwm tam sim no tau txais los ntawm Transmitter unit rau npe rau lub hom phiaj. Lub peev xwm los txheeb xyuas lub tsev los ntawm flashing pem hauv ntej vaj huam sib luag Fais fab LED ntawm chav tsev, thiab lub peev xwm rau Reboot lub tsev yuav tag nrho cov pab nrog indentification ntawm chav tsev rau naming lub hom phiaj.
4. Scaler – kho cov zis daws teeb meem uas siv lub built-in video scaler ntawm Multicast Receiver. Lub Scaler muaj peev xwm ntawm ob qho tib si upscaling thiab downscaling cov khoom video teeb liab.
5. Kev Ua - qhib qhov pop-up hauv qab no:Los ntawm lub neej ntawd, thaum lub sijhawm teeb tsa, OSD yuav tshwm sim ntawm txhua lub vijtsam txuas nrog Cov Chaw Txais Txais rau kev txheeb xyuas yooj yim ntawm Cov Txais. Lub peev xwm los txheeb xyuas ib tus neeg los ntawm flashing pem hauv ntej vaj huam sib luag Power LED's, thiab lub peev xwm los Reboot lub tsev yog nyob ntawm no.
6. Tig OSD Off / On - toggles cov khoom ID mus rau tag nrho cov kev sib txuas cov ntxaij vab tshaus / cov lus qhia (nyob rau ntawm lub neej ntawd thaum lub teeb tsa - OSD yuav kaw cia li qhov wizard nce).
7. Tom ntej no - txuas ntxiv mus rau nplooj ntawv teeb tsa Wizard tiav

Nplooj ntawv Wizard Ua tiav ua tiav cov txheej txheem kev teeb tsa yooj yim, muab cov kev sib txuas uas siv tau rau kev teeb tsa qib siab rau Video Phab Ntsa (tsis muaj rau IP50HD systems), Tsau teeb liab Routing (IR, RS-232, Suab thiab lwm yam), thiab muaj peev xwm rov qab - mus rau ib tug configuration file (pom zoo).
Nyem 'Finish' ib zaug ua tiav mus txuas ntxiv mus rau nplooj ntawv 'Drag & Drop Control'.

Web-GUI - Ntawv qhia zaub movview

Cov ntawv qhia 'User Interface' muab cov neeg siv qhua tuaj yeem hloov thiab ua ntejview Multicast system tsis pub nkag mus rau txhua qhov chaw uas tuaj yeem hloov kho tag nrho cov txheej txheem ntawm qhov system.

1. Drag & Drop Control - tswj kev xaiv qhov chaw rau txhua tus Multicast Receiver nrog rau cov duab ua ntejview ntawm cov khoom siv thoob plaws hauv lub system
2. Video Phab Ntsa Tswj - siv rau 'Drag & Drop' tswj qhov chaw xaiv rau video phab ntsa arrays hauv lub kaw lus, suav nrog cov duab ua ntejview ntawm cov khoom siv thoob plaws. Cov ntawv qhia zaub mov tsuas yog muaj nyob qhov twg cov phab ntsa video tau teeb tsa hauv qhov system
3. ID nkag mus - siv los nkag rau hauv qhov system ua Tus Neeg Siv, lossis Tus Thawj Coj

Cov ntawv qhia zaub mov Administrator tau nkag los ntawm ib tus password nkaus xwb raws li tau teeb tsa thaum pib teeb tsa. Cov ntawv qhia zaub mov no tso cai rau Multicast system tau teeb tsa tag nrho, nrog rau kev nkag mus rau txhua qhov chaw thiab cov yam ntxwv ntawm lub kaw lus.
Thov nco ntsoov: nws tsis pom zoo kom tawm hauv Administrator nkag los yog tus Administrator password nrog tus neeg siv kawg.

1. Drag & Drop Control - tswj kev xaiv qhov chaw rau txhua tus txais nrog rau cov duab ua ntejview ntawm qhov khoom siv
2. Video Phab Ntsa Tswj - tswj kev xaiv qhov chaw rau video phab ntsa arrays, suav nrog cov duab ua ntejview ntawm qhov khoom siv
3. Ua ntejview - Qhia cov kwj video nquag los ntawm ib qho kev sib txuas Transmitter thiab/lossis txais
4. Qhov project – view los yog teeb tsa ib qho tshiab lossis uas twb muaj lawm Blustream Multicast system
5. Transmitters - cov ntsiab lus ntawm tag nrho cov Transmitters ntsia, nrog rau kev xaiv rau EDID tswj, xyuas FW version, hloov kho chaw, ntxiv TX's tshiab, hloov lossis rebooting cov khoom
6. Cov neeg txais - cov ntsiab lus ntawm txhua tus txais tau teeb tsa, nrog rau kev xaiv rau kev daws teeb meem tso zis (HDR / scaling), muaj nuj nqi (video phab ntsa hom / matrix), hloov kho cov chaw, ntxiv RX's tshiab, hloov lossis rov pib dua cov khoom
7. Tsau Teeb Pom Kev Routing - teeb tsa txoj kev ywj pheej ntawm Video, Suab, IR, Serial, USB, lossis CEC cov cim
8. Video Phab Ntsa Configuration - teeb tsa thiab teeb tsa cov neeg txais los tsim cov phab ntsa video txog li 9 × 9, suav nrog: bezel / qhov sib txawv them nyiaj, ncab / haum, thiab kev sib hloov. (Thov nco ntsoov: phab ntsa video tsis txhawb nrog IP50HD systems).
9. Cov neeg siv - teeb tsa lossis tswj cov neeg siv ntawm qhov system
10. Kev teeb tsa - kev teeb tsa lub cev suav nrog: cov ntaub ntawv pov thawj network, tshem tawm qhov project, thiab rov pib dua ACM
11. Hloov Kho Cov Khoom Siv - siv qhov hloov tshiab firmware tshiab rau ACM, thiab txuas nrog Transmiters / Receivers
12. Hloov Password – hloov tshiab Administrator password credentials rau nkag mus rau ACM web-GUI
13. Log Out – log tawm tus neeg siv tam sim no / Tus Thawj Coj

Web-GUI - Drag & Drop Control

Cov nplooj ntawv Drag & Drop Control yog siv los hloov pauv qhov chaw tawm tswv yim (Transmitter) sai thiab yooj yim rau txhua qhov (lossis Tag Nrho) cov zaub (Receiver). Lub npe hu ua Convention of Transmitters and Receivers will be updated as per the names set when configuration, or as have been updated in the Transmitter or Receiver pages.
Thaum lub kaw lus tau teeb tsa tag nrho lub Drag & Drop Control nplooj ntawv yuav qhia tag nrho cov khoom xa tawm hauv online thiab txais khoom. Tag nrho cov khoom Multicast yuav tso saib cov kwj dej ntws los ntawm lub cuab yeej, uas refreshes txhua ob peb feeb.
Vim qhov loj ntawm lub qhov rais tso saib ntawm qee lub xov tooj, ntsiav tshuaj lossis laptops, yuav tsum muaj tus naj npawb ntawm Transmitters thiab Receivers loj dua qhov loj ntawm lub vijtsam, Tus Neeg Siv tau muab lub peev xwm los scroll / los so ntawm cov khoom siv (sab laug mus rau sab xis) .

Txhawm rau hloov qhov chaw, nyem rau ntawm qhov yuav tsum tau muaj / Transmitter, thiab luag tus ua ntejview mus rau qhov xav tau Receiver preview.
Tus txais preview qhov rais yuav hloov tshiab nrog cov kwj ntawm qhov chaw xaiv.
Lub Drag & Drop hloov yuav hloov kho cov yees duab / suab kwj ntawm Transmitter mus rau Receiver, tab sis tsis Kho Routing ntawm kev tswj cov teeb liab.
Yuav tsum 'Tsis Muaj Teeb Meem' yuav tshwm sim hauv Transmitter ua ntejview lub qhov rais, thov xyuas lub HDMI qhov cuab yeej yog powered on, outputting ib lub teeb liab, thiab txuas nrog HDMI cable rau lub Transmitter. Txheeb xyuas qhov EDID teeb tsa ntawm Transmitter ntaus ntawv muaj feem xyuam nrog cov khoom siv.
Yuav tsum 'Tsis Muaj Teeb Meem' yuav tsum tau muab tso rau hauv lub receiver ua ntejview qhov rais, xyuas lub tsev txuas nrog thiab siv los ntawm lub network (hloov), thiab muaj kev sib txuas siv tau rau chav ua haujlwm Transmitter.
Yuav tsum 'Tsis Muaj Zaub' yuav tsum muaj nyob rau hauv lub Receiver ua ntejview lub qhov rais, xyuas cov kev sib txuas lus yog powered thiab muaj ib tug siv tau HDMI kev twb kev txuas rau lub receiver.
Muaj ib lub qhov rais 'Txhua Tus Txais' nyob rau sab laug ntawm lub qhov rais txais txais. Dragging thiab xa me nyuam rov mus rau lub qhov rais no yuav hloov lub routing rau ALL Receivers nyob rau hauv lub system saib lub qhov chaw xaiv. Yuav tsum preview ntawm qhov rais no qhia lub logo Blustream, qhov no qhia tau hais tias muaj kev sib xyaw ntawm cov peev txheej tau saib thoob plaws Cov Txais hauv qhov system. Daim ntawv hauv qab 'Txhua Tus Txais' yuav tso tawm: 'TX: Txawv' los qhia qhov no.
Thov nco ntsoov: Nplooj ntawv Drag & Drop Control tseem yog nplooj ntawv home page rau cov neeg siv nquag siv ntawm Multicast system - tsuas yog qhov chaw uas Guest lossis Tus Neeg Siv tau tso cai rau view yuav pom.
Cov neeg txais hauv Video Phab Ntsa Hom tsis tso tawm rau ntawm nplooj ntawv Drag & Drop.

Web-GUI - Video Phab Ntsa Tswj

Txhawm rau pab nrog yooj yim Video Phab Ntsa Hloov Hloov, muaj cais Video Phab Ntsa Drag & Drop Control nplooj ntawv. Qhov kev xaiv zaub mov no tsuas yog muaj ib zaug Video Phab Ntsa tau teeb tsa hauv ACM / Multicast system.

Qhov chaw (Transmitter) preview cov qhov rais tau pom nyob rau sab saum toj ntawm nplooj ntawv nrog cov duab sawv cev ntawm Video Phab ntsa tso tawm hauv qab no. Txhawm rau hloov Video Phab Ntsa array los ntawm ib qhov chaw mus rau lwm qhov, Drag & Tso lub hauv paus ua ntejview qhov rais mus rau Video Phab ntsa ua ntejview hauv qab. Qhov no yuav hloov tag nrho cov ntxaij vab tshaus txuas hauv Video Phab Ntsa (hauv ib pab pawg hauv Video Phab ntsa nkaus xwb) rau tib qhov chaw / Transmitter hauv Configuration uas tam sim no xaiv (hauv ib pab pawg). Los yog Drag & Drop ib Transmitter ua ntejview mus rau ib qho screen 'Single' thaum Video Phab ntsa array nyob rau hauv ib qho screen configuration.
Blustream Multicast systems tuaj yeem muaj ntau lub Phab Ntsa Yees Duab (IP2xxUHD, lossis IP3xxUHD tshuab nkaus xwb). Xaiv qhov sib txawv Video Phab ntsa array, los yog siv lub pre-txhais Configuration / preset rau txhua Video Phab ntsa tuaj yeem ua tau los ntawm kev siv lub thawv poob saum toj ntawm cov duab sawv cev ntawm Video Phab ntsa. Cov duab sawv cev no yuav hloov pauv hloov pauv thaum koj xaiv lwm phab ntsa Video lossis Configuration.
Yuav tsum muaj ib qho screen nyob rau hauv Video Phab ntsa tso saib ntawm GUI qhia 'RX Tsis Assigned', qhov no txhais tau hais tias Video Phab ntsa tsis muaj lub receiver unit muab rau cov array. Thov thim rov qab mus rau Video Phab Ntsa teeb tsa los muab tus txais raws li.
Rau qib siab API cov lus txib rau kev tswj hwm ntawm Video Phab Ntsa arrays hauv ib lub kaw lus, thov xa mus rau API Command cov ntaub ntawv muaj los rub tawm los ntawm Blustream webqhov chaw.

Web-GUI - Preview

Ua ntejview feature yog ib txoj kev ceev view cov xov xwm tau streamed los ntawm Multicast system ib zaug configured. Ua ntejview cov kwj deg los ntawm ib qho khoom siv HDMI rau hauv Multicast Transmitter, lossis cov kwj deg tau txais los ntawm ib tus neeg txais kev pabcuam hauv qhov system ib txhij. Qhov no yog qhov tshwj xeeb tshaj yog pab tau rau kev debugging thiab xyuas cov khoom siv hluav taws xob muaj zog, thiab tso tawm HDMI teeb liab, lossis txhawm rau txheeb xyuas qhov xwm txheej I / O ntawm lub cev:

Ua ntejview windows qhia lub vijtsam rub tawm ntawm cov xov xwm uas tau hloov kho txhua ob peb feeb. Xaiv lub Transmitter lossis Receiver ua ntejview, siv lub npov nco los xaiv tus neeg xa khoom lossis tus txais yuav ua ntejview.

Web-GUI – Project Summary

Tshajview ntawm cov chav nyob uas tam sim no teeb tsa hauv Multicast system, lossis rau kev txheeb xyuas lub network rau cov khoom siv tshiab los muab rau lub kaw lus:

Cov kev xaiv ntawm nplooj ntawv no suav nrog:

1. Qhov System Loj: toggle ntawm: 0-75 Cov Khoom, thiab 75+ Cov Khoom.
2. Toggle OSD: qhib / tawm OSD (Ntawm npo zaub). Toggling OSD On qhia tus lej ID (piv txwv li ID 001) ntawm Multicast Receiver ntawm txhua cov zaub ua ib qho overlay rau cov xov xwm raug faib. Toggling OSD Off tshem tawm OSD.
3. Export Project: tsim kev txuag file (.json) rau qhov kev teeb tsa tam sim no ntawm qhov system.
4. Import Project: import ib qhov project uas twb tau teeb tsa rau hauv qhov system tam sim no. Qhov no yog tshwj xeeb tshaj yog pab tau thaum teeb tsa ib qho chaw nruab nrab lossis nthuav dav mus rau qhov system tam sim no tawm ntawm qhov chaw uas ob lub tshuab tuaj yeem muab tso rau hauv ib qho.
5. Clear Project: clears qhov project tam sim no.
6. Muab Cov Cuab Yeej Tshiab: muab cov khoom siv pom nyob rau hauv ntu Unassigned Devices (hauv qab ntawm nplooj ntawv no) rau cov kab ke tam sim no
7. Tsis tu ncua Scan & Auto Assign: tsis tu ncua luam theej duab lub network thiab pib muab cov khoom siv Multicast tshiab rau tus ID thiab IP chaw nyob txuas ntxiv. Yog tias tsuas yog txuas IB lub tsev tshiab, siv qhov kev xaiv 'Scan Ib zaug' - ACM yuav txuas ntxiv luam theej duab lub network rau Multicast li tshiab kom txog thaum pom, lossis xaiv lub pob no dua kom nres qhov scan.
8. Luam theej duab Ib zaug: luam theej duab lub network ib zaug rau ib qho tshiab Multicast li txuas nrog, thiab tom qab ntawd nthuav tawm nrog lub pop mus rau manually muab lub cuab yeej tshiab, lossis nws pib muab ib chav tshiab rau tom ntej muaj ID thiab IP chaw nyob raws li kev sib txuas.

Web-GUI – Transmitters

Nplooj ntawv cov ntsiab lus ntawm Transmitter yog dhau lawmview ntawm tag nrho cov Transmitter li uas tau teeb tsa nyob rau hauv lub system, muaj peev xwm hloov kho lub system raws li xav tau.

Cov yam ntxwv ntawm nplooj ntawv qhia txog Transmitter suav nrog:

1. ID - tus lej ID (input) yog siv rau kev tswj hwm ntawm Multicast system thaum siv cov neeg thib peb tswj platforms.
2. Lub npe - lub npe muab rau Transmitter (feem ntau yog lub cuab yeej txuas nrog Transmitter).
3. IP Chaw Nyob - tus IP chaw nyob muab rau Transmitter thaum teeb tsa.
4. MAC Chaw Nyob - qhia MAC chaw nyob ntawm Transmitter (LAN 1 chaw nres nkoj).
5. Dante MAC - qhia MAC chaw nyob ntawm LAN2 chaw nres nkoj uas muaj kev ywj pheej Dante txuas tau siv. Thov saib lub pob cim LAN2 Hom Pab rau kev piav qhia ntxiv ntawm kev sib cais Video thiab Dante tes hauj lwm.
6. Khoom - txheeb xyuas cov khoom siv uas txuas nrog lub system.
7. Firmware - firmware version tam sim no thauj khoom mus rau Transmitter. Yog xav paub ntxiv txog kev hloov kho firmware, thov mus saib 'Update Firmware' seem.
8. Status – qhia qhov Online / Offline xwm txheej ntawm txhua tus Transmitter. Yuav tsum muaj cov khoom lag luam qhia tias 'Offline', xyuas cov units txuas mus rau lub network hloov, ceev ntawm kev sib txuas mus rau lub network.
9. EDID - kho tus nqi EDID rau txhua qhov Transmitter (qhov chaw). Qhov no yog siv los thov cov kev daws teeb meem tshwj xeeb video thiab suab rau cov khoom siv los tso tawm. Cov kev pab cuam yooj yim tuaj yeem tau txais ntawm EDID xaiv los ntawm nias lub pob nyob rau sab saum toj ntawm nplooj ntawv cim 'EDID Pab'. Cov kev xaiv EDID muaj siv rau IP50HD, IP2xxUHD, thiab IP3xxUHD tshuab txhua qhov sib txawv.
10. HDMI Audio - xaiv lub suab HDMI qub, lossis hloov lub suab nrog lub suab analogue hauv zos ntawm Transmitter. Default setting yuav yog 'Auto'.
11. LAN2 Hom: qhov twg siv IP250UHD lossis IP350UHD, nws muaj peev xwm cais cov Dante suab rau kev sib txuas mus rau Dante network cais los ntawm no. Qhov twg siv IP200UHD lossis IP300UHD (tsis muaj Dante txuas), qhov kev xaiv no tsis xaiv tau. Saib cov lus hauv qab no rau kev xaiv LAN (tsis muaj nyob ntawm ACM firmware rau IP50HD)
12. Kev Ua - qhib lub qhov rai pop-up nrog kev teeb tsa siab heev. Saib nplooj ntawv nram qab no kom paub ntxiv.
13. Refresh – refresh tag nrho cov ntaub ntawv tam sim no ntawm cov khoom siv hauv qhov system.

VLAN MODE	PoE/Lan	2 rj45	SFP
0 (neej ntawd)	VoIP + Dante	Neeg tsis taus	VoIP + Dante
1	VoIP	Dante	Neeg tsis taus
2	VolP/Dante	Ua raws li PoE/Lan chaw nres nkoj	VoIP + Dante

Web-GUI - Transmitters - Ua

Lub 'Ua Haujlwm' khawm tso cai rau cov yam ntxwv siab heev ntawm cov chav nyob kom nkag mus thiab teeb tsa.
Lub Npe - Cov npe xa ntawv tuaj yeem hloov kho los ntawm kev nkag mus rau lub npe rau hauv lub thawv ntawv dawb. Thov nco ntsoov: qhov no tsuas yog txwv rau 16 tus cim ntev, thiab qee cov cim tshwj xeeb yuav tsis raug txhawb.
Hloov tshiab ID - Cov neeg siv Advanced nkaus xwb - tus ID ntawm ib chav tsev tau teeb tsa (raws li lub neej ntawd) rau tib tus lej raws li tus lej kawg ntawm 3 tus lej ntawm chav nyob IP xws li Transmitter tus lej 3 tau muab tus IP chaw nyob ntawm 169.254.3.3 thiab yuav muaj ID ntawm 3. Kev hloov kho tus ID ntawm chav tsev tsis pom zoo.
System Size - kho qhov system loj rau ib qho Transmitter
HDMI Suab - xaiv ntawm: Auto, HDMI, lossis Analogue suab
HDCP Hom - xaiv ntawm: HDCP Bypass, Force 2.2, lossis Force 1.4
CEC Pass-through (On / Off) - tso cai rau CEC (Consumer Electronic Command) xa los ntawm Multicast system mus rau thiab los ntawm cov khoom siv txuas nrog rau Transmitter. Thov nco ntsoov: CEC yuav tsum tau qhib rau ntawm chav txais txais kuj rau CEC cov lus txib kom xa tuaj nruab nrab. Default teem rau qhov no feature yog OFF.
Pem hauv ntej vaj huam sib luag zaub (On / Off) - pab / lov tes taw cov zaub nyob rau pem hauv ntej ntawm lub Transmitter. Lub vaj huam sib luag pem hauv ntej ntawm Multicast chav tsev yuav txiav lub sijhawm tawm tom qab 90 vib nas this, thiab tua. Nias ib lub pob nyob rau pem hauv ntej ntawm Transmitter los tsa cov zaub thaum tawm.
Pem hauv ntej Vaj Huam Sib Luag Fais Fab LED Flash (On / Off / On 90 Seconds) - yuav nyem lub zog LED ntawm lub vaj huam sib luag pem hauv ntej ntawm Transmitter los pab txheeb xyuas cov khoom tom qab nws pib teeb tsa. Cov kev xaiv yog: nyem lub teeb lub zog tsis tu ncua, lossis nyem lub LED rau 90 vib nas this ua ntej LED rov qab mus rau qhov ci mus tas li. Thov nco ntsoov: pem hauv ntej vaj huam sib luag LED yuav cia li ncua sij hawm tom qab 90 vib nas this nrog rau pem hauv ntej vaj huam sib luag zaub. Nias ib qho ntawm CH nyees khawm kom tsa lub tsev.
Luam EDID – saib nplooj ntawv tom ntej kom paub ntxiv txog 'Copy EDID'.
Serial Chaw - tig rau serial 'Tus qhua hom' thiab teeb tsa tus kheej serial chaw nres nkoj chaw rau lub cuab yeej (ie Baud Rate, Parity thiab lwm yam).
Ua ntejview - nthuav tawm lub qhov rais pop-up nrog nyob ib qho screen tuav ntawm qhov khoom siv txuas nrog Transmitter.
Reboot - reboots lub Transmitter.
Hloov - siv los hloov lub transmitter offline. Thov nco ntsoov: Lub Transmitter yuav tsum tau hloov yuav tsum yog offline rau qhov no feature yuav tsum tau siv, thiab lub Transmitter tshiab yuav tsum yog lub Hoobkas default unit nrog default IP chaw nyob: 169.254.100.254.
Tshem tawm ntawm Project - tshem tawm cov khoom siv Transmitter los ntawm qhov project tam sim no.
Factory Reset - rov kho lub Transmitter mus rau nws qhov qub qub chaw thiab teeb tsa tus IP chaw nyob rau: 169.254.100.254.

Web-GUI - Transmitters - Ua - Luam EDID
EDID (Extended Display Identification Data) yog cov qauv ntaub ntawv uas siv los ntawm ib qho khoom siv thiab qhov chaw. Cov ntaub ntawv no yog siv los ntawm lub hauv paus los nrhiav seb qhov kev daws teeb meem ntawm lub suab thiab video tau txais kev txhawb nqa los ntawm cov zaub ces los ntawm cov ntaub ntawv no lub hauv paus yuav nrhiav tau qhov zoo tshaj plaws suab thiab video daws teeb meem yuav tsum tau tso tawm.
Thaum lub hom phiaj ntawm EDID yog ua kom txuas cov duab digital mus rau qhov chaw yooj yim plug-and-play txheej txheem, teeb meem tuaj yeem tshwm sim thaum ntau qhov kev qhia, lossis video matrix hloov pauv tau qhia vim tias muaj ntau qhov sib txawv.
Los ntawm kev txiav txim siab ua ntej cov kev daws teeb meem video thiab lub suab ntawm lub hauv paus thiab cov cuab yeej tso saib koj tuaj yeem txo lub sijhawm xav tau rau EDID tes tuav yog li ua rau kev hloov pauv sai dua thiab txhim khu kev qha.
Daim EDID muaj nuj nqi tso cai rau EDID ntawm cov zaub kom rub thiab khaws cia hauv Multicast system. EDID configuration ntawm lub vijtsam tuaj yeem rov qab los ntawm EDID xaiv ntawm Transmitter. Cov lus qhia EDID tuaj yeem siv rau txhua qhov khoom siv tsis pom zoo ntawm lub vijtsam hauv nqe lus nug.
Nws raug pom zoo kom paub tseeb tias cov xov xwm los ntawm Transmitter nrog kev cai EDID qhia kom raug ntawm lwm cov lus qhia hauv qhov system.
Thov nco ntsoov: Nws yog ib qho tseem ceeb uas tsuas yog ib qho screen xwb viewnyob rau hauv lub Transmitter thaum lub sij hawm EDID Copy tshwm sim.

Web-GUI - Txais

Lub qhov rais Receiver summary window qhia ib qho dhauview ntawm tag nrho cov txais khoom siv uas tau teeb tsa hauv lub system, nrog lub peev xwm los hloov kho qhov system raws li qhov xav tau.

Cov yam ntxwv ntawm nplooj ntawv cov ntsiab lus ntawm tus txais muaj xws li:

1. ID - tus lej ID (tso zis) yog siv rau kev tswj hwm ntawm Multicast system thaum siv cov neeg thib peb tswj platforms.
2. Lub npe – lub npe ntawm tus txais (feem ntau yog cov cuab yeej txuas nrog rau Tus Txais) tau txais lub npe lub npe xws li Txais 001 thiab lwm yam. Cov npe txais tuaj yeem hloov kho nyob rau hauv nplooj ntawv teeb tsa (hauv Wizard), lossis nyem rau ntawm 'Ua Haujlwm' khawm rau ib chav tsev (saib nplooj ntawv tom ntej).
3. IP Chaw Nyob - tus IP chaw nyob muab rau tus txais thaum lub sijhawm teeb tsa.
4. MAC Chaw Nyob - qhia MAC chaw nyob ntawm tus txais (LAN 1 chaw nres nkoj).
5. Dante MAC - qhia MAC chaw nyob ntawm LAN2 chaw nres nkoj uas muaj kev ywj pheej Dante txuas tau siv. Thov saib lub pob cim LAN2 Hom Pab rau kev piav qhia ntxiv ntawm kev sib cais Video thiab Dante tes hauj lwm.
6. Khoom - txheeb xyuas cov khoom siv uas txuas nrog lub system.
7. Firmware - qhia cov firmware version tam sim no thauj khoom mus rau Tus Txais. Yog xav paub ntxiv txog kev hloov kho firmware, thov mus saib 'Update Firmware' seem.
8. Status – qhia qhov Online / Offline xwm txheej ntawm txhua tus txais. Yog tias cov khoom lag luam pom tias yog 'Offline', xyuas cov khoom txuas mus rau lub network hloov.
9. Qhov chaw - qhia qhov chaw tam sim no xaiv ntawm txhua tus txais. Txhawm rau hloov qhov kev xaiv, xaiv lub Transmitter tshiab los ntawm kev xaiv poob.
10. Scaler Resolution - kho cov zis daws teeb meem uas siv lub teeb tsa hauv video hauv Multicast Receiver. Lub scaler muaj peev xwm ntawm ob qho tib si upscaling thiab downscaling cov khoom video teeb liab. Cov kev pab yooj yim tuaj yeem tau txais ntawm kev xaiv scaler los ntawm nias lub pob nyob rau sab saum toj ntawm nplooj ntawv cim 'Scaling Help'. Cov kev daws teeb meem muaj nyob rau IP50HD, IP2xxUHD, thiab IP3xxUHD tshuab txhua qhov sib txawv.
11. HDR On/Off - tig rau HDR (High Dynamic Range) kev sib raug zoo - tsuas yog siv nrog cov ntxaij vab tshaus uas txhawb HDR.
12. Muaj nuj nqi - txheeb xyuas tus Txais raws li cov khoom lag luam ib leeg (Matrix) lossis ua ib feem ntawm Video Phab Ntsa. Qhov kev xaiv no yog greyed tawm thaum tus txais tsis yog ib feem ntawm Video Phab Ntsa array.
13. LAN2 Hom: qhov twg siv IP250UHD lossis IP350UHD, nws muaj peev xwm cais cov Dante suab rau kev sib txuas mus rau Dante network cais los ntawm no. Qhov twg siv IP200UHD lossis IP300UHD (tsis muaj Dante txuas), qhov kev xaiv no tsis xaiv tau. Saib cov lus dhau los (TX nplooj ntawv) rau LAN xaiv (tsis muaj nyob rau ntawm ACM firmware rau IP50HD).
14. Kev Ua - saib nplooj ntawv tom ntej rau kev sib cais ntawm kev xaiv ua ntxiv.
15. Scaling Help – koj tuaj yeem tau txais qee qhov kev pab cuam nrog kev xaiv scaling los ntawm nias lub pob nyob rau sab saum toj ntawm nplooj ntawv cim 'Scaling Help'.
16. Refresh - nyem qhov no kom rov ua dua txhua cov ntaub ntawv tam sim no ntawm cov khoom siv hauv qhov system.

Web-GUI - Txais - Ua

Lub 'Ua Haujlwm' khawm tso cai rau cov yam ntxwv siab heev ntawm Tus Txais yuav nkag mus thiab teeb tsa.
Lub npe - tuaj yeem hloov kho los ntawm kev nkag mus rau lub npe rau hauv lub thawv ntawv dawb.
Thov nco ntsoov: qhov no tsuas yog txwv rau 16 tus cim ntev, thiab qee cov cim tshwj xeeb yuav tsis raug txhawb.
Hloov tshiab ID - tus ID yog defaulted mus rau 3 tus lej kawg ntawm lub cuab yeej IP chaw nyob piv txwv li Tus Txais 3 tau muab tus IP chaw nyob ntawm 169.254.6.3. Hloov tshiab ID tso cai rau tus ID / IP ntawm chav tsev hloov kho.
System Size - kho qhov system loj rau ib tus txais.
HDCP Hom - xaiv ntawm: HDCP Bypass, Force 2.2, lossis Force 1.4.
ARC Hom - thov saib ARC piav qhia ntawm nplooj ntawv tom ntej.
Fast Switching - hloov cov yees duab ua ntej, nrog lub suab, IR, RS-232, USB / KVM tag nrho hloov tom qab. Thov nco ntsoov: thaum lub yees duab pub yuav hloov sai dua, lwm qhov ntawm cov khoom noj (xws li suab, IR thiab lwm yam) yuav siv sij hawm ntev me ntsis kom ntes tau.
CEC Pass-through (ON / OFF) - tso cai rau CEC (Consumer Electronic Command) xa los ntawm Multicast system. Thov nco ntsoov: CEC kuj yuav tsum tau qhib rau ntawm Transmitter.
Video Output (ON / OFF) - tig ON / OFF lub HDMI video tso zis - yuav tsum tau tuav tes tshiab thaum tig rov qab.
Video Mute (ON / OFF) - mutes lub HDMI tso zis (tsim lub vijtsam dub), tuav lub HDMI tuav tes.
Video Pause (ON / OFF) - ncua lub HDMI video thiab kos lub suab ntawm tus ncej thaum hais kom ua. Tig OFF khaws lub HDMI pub los ntawm qhov taw tes thaum hais kom ua.
Video Auto On (ON / OFF) - tua cov yees duab tso zis thaum tsis muaj kev tshaj tawm. Cov zis yuav tig rov qab thaum media pib.
Pem Hauv Ntej Vaj Huam Sib Luag Khawm (ON / OFF) - Channel cov nyees khawm nyob rau pem hauv ntej ntawm txhua tus txais tuaj yeem raug kaw kom tsis txhob hloov pauv tsis xav tau.
Pem Hauv Ntej Vaj Huam Sib Luag IR (ON / OFF) - ua rau lossis cuam tshuam tus txais los ntawm kev lees txais IR cov lus txib.
On Screen Product ID (On / Off / On 90 Seconds) – tig On / Off lub On Screen Product ID. Toggling ntawm Cov Khoom Muag Khoom ID On qhia tus ID (piv txwv li ID 001) ntawm tus txais tau overlayed ntawm cov zaub txuas.
Pem hauv ntej Vaj Huam Sib Luag Fais LED Flash (On / Off / On 90 Seconds) - yuav nyem lub hwj chim LED nyob rau pem hauv ntej vaj huam sib luag ntawm tus txais los pab txheeb xyuas lub cuab yeej.
Pem Hauv Ntej Vaj Huam Sib Luag (Ntawm / 90 Thib Ob) - siv qhov no los pab / lov tes taw cov zaub nyob rau pem hauv ntej ntawm Tus Txais. Cov zaub ntawm lub cuab yeej yuav ncua sijhawm tom qab 90 vib nas this kom txog thaum sawv.
Kev sib hloov - tig cov duab los ntawm: 0, 90, 180 thiab 270 degrees.
Stretch - re-loj daim duab rau 'stretch' mus rau nam ntawm cov zaub, los yog 'Tswj Aspect Ratio' ntawm qhov chaw tso zis ntaus ntawv.
Serial Chaw / Preview / Reboot / Hloov / Tshem tawm ntawm Project / Factory Reset - teeb tsa tib yam li piav qhia ntawm nplooj ntawv Transmitter yav dhau los.

Web-GUI - Tsau teeb liab Routing

ACM muaj peev xwm ua kom muaj kev ywj pheej tshaj tawm ntawm cov teeb liab hauv qab no ntawm Multicast system:

• Video
• Suab (thov nco ntsoov: ywj siab suab routing tsis muaj nyob rau ntawm thje IP50HD series. ARC tsuas yog muaj nyob rau IP300UHD thiab IP350UHD systems)
• Infrared (IR)
• RS-232
• USB / KVM
• CEC (Consumer Electronic Command) - xiam oob qhab los ntawm lub neej ntawd. Txhawm rau qhib, thov ua li ntawd hauv TX / RXAction tab ib chav

Qhov no tso cai rau txhua lub teeb liab raug kho los ntawm ib qho khoom siv Multicast mus rau lwm qhov thiab tsis cuam tshuam los ntawm kev hloov pauv video txheem. Qhov no tuaj yeem muaj txiaj ntsig zoo rau IR, CEC lossis RS-232 tswj cov khoom lag luam hauv thaj chaw siv Multicast system los txuas ntxiv kev tswj hwm los ntawm lwm tus neeg tswj kev daws teeb meem, lossis cov tuam txhab IR chaw taws teeb tswj.
Thov nco ntsoov: nrog rau kev zam ntawm IR thiab RS-232, routing tsuas tuaj yeem kho los ntawm tus txais mus rau cov khoom xa tawm. Txawm hais tias routing tsuas tuaj yeem teeb tsa ib txoj hauv kev, kev sib txuas lus yog ob qho kev taw qhia ntawm ob yam khoom.

Los ntawm lub neej ntawd, txoj kev ntawm: Video, Suab, IR, Serial, USB thiab CEC yuav cia li ua raws li kev xaiv Transmitter ntawm chav txais txais.
Txhawm rau xaiv txoj hauv kev ruaj khov, siv lub npov nco rau txhua tus ntawm tus kheej cov cim / Txais los kho txoj hauv kev.
Thaum ACM tau ntxiv rau hauv Multicast system, IR hloov pauv tswj peev xwm (tsis yog IR hla dhau) thiab cov khawm pem hauv ntej ntawm Multicast Receivers tau qhib los ntawm lub neej ntawd. Qhov no yog neeg xiam oob khab los ntawm Kev Ua Haujlwm muaj nyob rau hauv nplooj ntawv qhia txog Tus Neeg Txais (saib nplooj ntawv dhau los).
Routing tuaj yeem raug tshem tawm los ntawm kev xaiv 'Ua raws' ntawm txhua qhov chaw los ntawm web-GUI. Xav paub ntau ntxiv ntawm Kev Routing ruaj khov tuaj yeem pom los ntawm txhaj rau 'Fixed Routing Help'.
Rau kev tshaj tawm cov lus txib rau Video, Suab, IR, RS-232, USB thiab CEC thaum siv nrog 3rd tog tswj qhov system, thov xa mus rau cov ntaub ntawv API cais (muaj los rub tawm los ntawm Blustream webqhov chaw).

Tsau Routed Suab
ACM tso cai rau lub suab sib txuas ntawm HDMI teeb liab los ntawm nws tus kheej thoob plaws hauv Blustream Multicast system. Nyob rau hauv ib txwm ua haujlwm lub suab nyob rau hauv lub teeb liab HDMI yuav raug muab faib nrog cov teeb liab video los ntawm Transmitter rau Receiver / s.
Lub taag suab routing peev xwm ntawm ACM tso cai rau lub suab khiav los ntawm ib qhov chaw mus rau embedded mus rau lwm Transmitters video kwj.

Tsau Routed IR
Qhov ruaj khov IR routing feature tso cai rau ib qho kev ruaj khov IR txuas ntawm 2x Multicast khoom. Lub teeb liab IR tsuas yog khiav ntawm kev teeb tsa RX rau TX, lossis TX rau TX cov khoom. Qhov no tuaj yeem muaj txiaj ntsig zoo rau kev xa IR los ntawm qhov chaw nruab nrab ntawm cov neeg sab nrauv tswj kev daws teeb meem (ELAN, Control4, RTi, Savant thiab lwm yam) thiab siv Blustream Multicast system ua ib txoj hauv kev txuas IR tawm mus rau ib qho khoom lossis lwm yam khoom hauv lub cev. IR txuas yog ob-directional yog li tseem tuaj yeem xa rov qab rau txoj kev rov qab rau tib lub sijhawm.

Kev sib txuas:
Tus neeg thib peb tswj processor IR, lossis Blustream IR receiver, txuas nrog IR RX qhov (socket) ntawm Multicast Transmitter lossis Receiver.
Thov nco ntsoov: Koj yuav tsum siv Blustream 5V IRR Receiver lossis Blustream IRCAB (3.5mm lub tso suab rau mono 12V rau 5V IR converter cable). Blustream Infrared cov khoom yog tag nrho cov 5V thiab TSIS tau tshaj lwm cov manufacturers Infrared daws.

Lub Blustream 5V IRE1 Emitter txuas nrog IR OUT socket ntawm Multicast Transmitter lossis Receiver.
Lub Blustream IRE1 & IRE2 Emitters yog tsim los rau kev sib cais IR tswj ntawm cov khoom siv.
(IRE2 - Dual Eye Emitter muag nyias)

Tsau Routed USB / KVM
Qhov ruaj USB routing feature tso cai rau ib qho txuas USB txuas ntawm Multicast Receiver/s thiab Transmitter. Qhov no tuaj yeem muaj txiaj ntsig zoo rau kev xa KVM cov cim qhia ntawm tus neeg siv txoj haujlwm mus rau hauv nruab nrab ntawm PC, server, CCTV DVR / NVR thiab lwm yam.

USB Specifications:

USB Specification	USB2.0 (thov nco ntsoov: tsis txhawb nqa tag nrho USB2.0 cov ntaub ntawv hloov chaw)
Txuas ntxiv	Tshaj IP, Hybrid redirection technology
Nyob deb	100m ua
Nyob deb Ext.	ntawm Ethernet hloov hub
Max Downstream Devices	5
Topology	1 rau 1 1 rau ntau tshwj xeeb (USBoIP) 1 rau ntau ib txhij tab sis tsawg tus lej ntawm USB li (USBoIP) * 1 rau ntau ib txhij Keyboard / Nas (K / MoIP)
USB R/W Performance *	R: 69.6 Mbps W: 62.4 Mbps

* Benchmark Reference: Nyeem / Sau USB rau SATA HD yam tsis muaj Multicast system R: 161.6 Mbps / W: 161.6 Mbps

Tsau Routed CEC
CEC lossis Consumer Electronic Command yog HDMI embedded tswj raws tu qauv uas tso cai rau cov lus txib xa los ntawm ib qho khoom siv HDMI mus rau lwm qhov rau kev ua haujlwm yooj yim xws li: Hwj chim, Volume thiab lwm yam.
Blustream Multicast system tso cai rau CEC channel hauv HDMI txuas ntawm ob yam khoom (qhov chaw thiab dab dej) sib txuas lus nrog ib leeg siv CEC raws tu qauv.
CEC yuav tsum tau enabled (qhov no yog qee zaum hu ua 'HDMI Control') ntawm ob lub hauv paus khoom thiab cov khoom siv hauv kev txiav txim rau Multicast system sib txuas lus CEC cov lus txib hla Multicast txuas.
Thov nco ntsoov: Blustream Multicast system tsuas yog thauj CEC raws tu qauv pob tshab. Nws yog ib qho tsim nyog los xyuas kom meej tias lub hauv paus thiab cov dab dej dab dej yuav sib txuas lus zoo ua ntej cog lus rau hom kev tswj hwm no nrog Multicast. Yog tias muaj teeb meem ntsib nrog CEC kev sib txuas lus ntawm qhov chaw thiab dab dej ncaj qha, qhov no yuav raug tsom mus rau thaum xa los ntawm Multicast system.

ARC & Optical Audio Rov Qab (IP300UHD & IP350UHD nkaus xwb)
Cov khoom lag luam IP300UHD thiab IP350UHD muaj peev xwm coj HDMI ARC, HDMI eARC, lossis Optical audio connectivity los ntawm cov zaub txuas nrog tus txais, thiab faib qhov no rov qab mus rau Optical tso zis ntawm lub Transmitter unit nyob remotely hauv lub system. Thov nco ntsoov, qhov tshwj xeeb no tsis muaj nyob rau ntawm lwm yam khoom Multicst thiab tsuas yog txwv rau max 5.1ch suab.
Lub routing ntawm Lub Suab Rov Qab feature yog tswj los ntawm hauv qab ntawm Tiav Routing tab ntawm ACM210 interface:

ARC yog Off los ntawm lub neej ntawd. Enabling ARC yog 2 kauj ruam txheej txheem:

1. Xaiv txoj kev uas siv lub npov nco-down txuas rau Transmitter mus rau Tus Txais
2. Nkag mus rau ACM Receiver tab, nyem rau ntawm khawm Ua haujlwm rau RX txuas rau Transmitter. Xaiv txoj kev suab twg yog siv los ntawm lub cim nco-down "ARC Hom" (thov nco ntsoov: CEC yuav tsum tau qhib rau HDMI ARC):

Web-GUI - Video Phab Ntsa Configuration

Blustream Multicast Receivers tuaj yeem teeb tsa los ua ib feem ntawm Video Wall array hauv ACM. Txhua qhov Multicast system tuaj yeem muaj txog 9x Video Phab Ntsa arrays ntawm cov duab sib txawv thiab qhov ntau thiab tsawg. Ntau yam ntawm 1 × 2 txog 9 × 9.

Txhawm rau teeb tsa Video Phab Ntsa Tshiab, mus rau Video Wall Configuration ntawv qhia zaub mov thiab nyem lub pob sau npe 'Tshiab Video Phab Ntsa' raws li cim rau saum lub vijtsam. Pab nrog tsim cov Video Phab Ntsa array tuaj yeem pom los ntawm nias lub pob cim 'Video Wall Help'.
Thov nco ntsoov: Lub Multicast Receivers uas yuav siv rau Video Phab ntsa yuav tsum tau teeb tsa raws li tus neeg txais kev pab ua ntej yuav mus dhau qhov taw tes no. Nws yog qhov kev xyaum zoo uas twb tau muab npe rau Multicast Receivers rau kev yooj yim ntawm kev teeb tsa xws li "Video Wall 1 - Sab laug".

Nkag mus rau cov ntaub ntawv cuam tshuam rau hauv lub qhov rai pop-up rau npe thiab xaiv cov naj npawb ntawm cov vaj huam sib luag ob leeg kab rov tav thiab ntsug hauv Video Phab ntsa array. Thaum cov ntaub ntawv raug muab tso rau ntawm qhov screen, xaiv 'Tsim' los tsim cov Video Phab Ntsa array template hauv ACM.

Nplooj ntawv qhia zaub mov rau Video Phab Ntsa array tshiab muaj cov kev xaiv hauv qab no:

1. Rov qab - rov qab mus rau nplooj ntawv dhau los rau kev tsim phab ntsa Video tshiab.
2. Hloov Lub Npe - hloov lub npe muab rau Video Phab Ntsa array.
3. Screen Settings - kev hloov kho ntawm bezel / qhov sib txawv them nyiaj ntawm cov ntxaij vab tshaus siv. Saib nplooj ntawv tom ntej kom paub meej ntxiv ntawm Bezel nqis.
4. Pawg Configurator - muaj cov kev xaiv los tsim ntau yam kev teeb tsa (lossis 'presets') rau txhua qhov Video Wall array hauv Multicast system. Cov pab pawg / preset tso cai rau Video Phab Ntsa yuav tsum tau xa mus rau ntau txoj hauv kev xws li pab pawg sib txawv ntawm cov ntxaij vab tshaus ua ke los tsim cov phab ntsa sib txawv hauv ib qho array.
5. Toggle OSD – tig On / Off OSD (Ntawm npo zaub). Toggling OSD On yuav qhia tus lej ID (piv txwv li ID 001) ntawm Multicast Receiver ntawm txhua cov zaub txuas nrog tus txais raws li kev tshaj tawm rau cov xov xwm uas tau muab faib. Toggling OSD Off tshem tawm OSD. Qhov no tso cai rau kev txheeb xyuas yooj yim ntawm cov lus qhia hauv Video Phab ntsa thaum lub sijhawm teeb tsa thiab teeb tsa.

Display / Receiver Assign:
ACM yuav tsim ib qho kev sawv cev ntawm Video Phab ntsa rau ntawm nplooj ntawv. Siv cov xub poob rau txhua lub vijtsam los xaiv cov khoom cuam tshuam Multicast Receiver txuas nrog txhua lub vijtsam ntawm Video Phab ntsa array.

Web-GUI - Video Phab Ntsa Configuration - Bezel Chaw
Nplooj ntawv no tso cai rau cov nyiaj them rau qhov loj me ntawm txhua lub vijtsam bezel hauv Video Phab Ntsa, lossis hloov pauv rau txhua qhov khoob hauv nruab nrab ntawm cov ntxaij vab tshaus. Los ntawm lub neej ntawd, Multicast system yuav ntxig lub bezels ntawm Video Phab ntsa cov ntxaij vab tshaus "innoveen" tag nrho cov duab (splitting daim duab). Qhov no yuav txhais tau tias cov bezels ntawm cov ntxaij vab tshaus tsis zaum "dhau" ib feem ntawm daim duab. Los ntawm kev kho qhov dav dav (OW) vs View Dav (VW), thiab qhov siab (OH) vs View Qhov siab (VH), lub vijtsam bezels tuaj yeem hloov kho kom zaum "saum toj" ntawm daim duab uas tau tshwm sim.

Txhua chav nyob yog los ntawm lub neej ntawd 1,000 - qhov no yog tus lej arbitary. Nws raug nquahu kom siv qhov ntev ntawm cov ntxaij vab tshaus siv hauv mm. Txhawm rau them nyiaj rau bezel loj ntawm cov ntxaij vab tshaus siv, txo qhov View Dav thiab View Qhov siab raws li kev them nyiaj rau qhov loj ntawm bezels. Thaum tau txais cov txiaj ntsig ntawm kev kho kom raug, lub 'Copy Bezels to All' khawm tuaj yeem siv los luam cov chaw rau txhua qhov zaub. Nyem 'Hloov kho' kom paub meej cov chaw thiab rov qab mus rau yav dhau los Hloov Kho Video Phab Ntsa screen.
Lub pob 'Bezel Pab' qhib lub qhov rai pop-up nrog kev taw qhia rau kev kho thiab hloov kho ntawm cov chaw no.

Web-GUI - Video Phab Ntsa Configuration - Pab Pawg Configurator
Thaum Video Phab Ntsa array tau tsim, nws tuaj yeem teeb tsa rau cov kev xaiv sib txawv. Lub Video Phab Ntsa Configurator tso cai rau presets los tsim rau kev xa cov Video Phab ntsa los kho rau cov pab pawg sib txawv ntawm cov duab thoob plaws array. Nyem rau 'Group Configurator' khawm los ntawm Hloov Kho Video Phab Ntsa screen.

Cov kev xaiv hauv cov ntawv qhia zaub mov no raws li hauv qab no:

1. Rov qab - navigates rov qab mus rau nplooj ntawv Hloov Kho Video Phab Ntsa yam tsis tau hloov pauv rau qhov teeb tsa.
2. Configuration Dropdown – txav ntawm qhov sib txawv configurations / presets yav tas los teeb-up rau Video Phab ntsa array. Los ntawm lub neej ntawd, 'Configuration 1' yuav raug muab tso rau Video Phab Ntsa tau tsim thiab teeb tsa thawj zaug.
3. Hloov Kho Lub Npe – teem lub npe ntawm kev teeb tsa / preset piv txwv li 'Single Screens' lossis 'Video Wall'. Los ntawm lub neej ntawd, configuration / preset npe yuav raug teeb tsa li 'Configuration 1, 2, 3…' kom txog thaum hloov.
4. Ntxiv Configuration – ntxiv ib tug tshiab configuration / preset rau cov xaiv Video Wall.
5. Rho tawm – tshem tawm cov kev xaiv tam sim no.

Pab Pawg:
Kev sib koom ua ke tso cai rau Video Phab Ntsa yuav raug xa mus rau ntau txoj hauv kev xws li tsim cov phab ntsa Video sib txawv hauv qhov loj dua Video Phab array. Siv cov kev xaiv dropdown rau txhua qhov screen los tsim ib pab pawg hauv Video Phab Ntsa:

Saib nplooj ntawv tom ntej kom piav qhia ntxiv txog qhov loj dua Video Phab Ntsa array tuaj yeem muaj ntau pawg teeb tsa hauv.
Web-GUI - Video Phab Ntsa Configuration - Pab Pawg Configurator
Rau example: a 3 × 3 Video Phab ntsa array tuaj yeem muaj ntau yam kev teeb tsa / presets:

1. Rau kev nthuav tawm 9x qhov sib txawv ntawm cov xov xwm kwj tawm - kom txhua lub vijtsam ua haujlwm ntawm nws tus kheej nrog txhua tus neeg lub vijtsam uas qhia ib qhov chaw - tsis yog pawg (tso tawm txhua qhov kev poob qis li 'Single').
2. Raws li 3 × 3 Video Phab Ntsa - tso tawm ib qho kev tshaj tawm xov xwm thoob plaws 9 lub vijtsam (txhua lub vijtsam yuav tsum raug xaiv ua 'Pab A').
3. Rau kev nthuav tawm 2 × 2 Video Phab ntsa duab hauv tag nrho 3 × 3 Video Phab Ntsa array. Qhov no tuaj yeem muaj 4x ntau txoj kev xaiv:
   - Nrog rau 2 × 2 nyob rau sab saum toj sab laug ntawm 3 × 3, nrog 5x ib tus neeg cov ntxaij vab tshaus mus rau sab xis thiab hauv qab (xaiv 2 × 2 nyob rau sab laug sab saum toj li Pab Pawg A nrog rau lwm cov ntxaij vab tshaus teeb ua 'Single') - saib examphauv qab no…
   - Nrog rau 2 × 2 nyob rau sab xis saum toj ntawm 3 × 3, nrog 5x ib tus neeg cov ntxaij vab tshaus mus rau sab laug thiab hauv qab (xaiv 2 × 2 nyob rau sab xis saum toj li Pab Pawg A nrog rau lwm cov ntxaij vab tshaus teeb tsa 'Single').
   - Nrog 2 × 2 nyob rau hauv qab sab laug ntawm 3 × 3, nrog 5x ib tus neeg cov ntxaij vab tshaus rau sab xis thiab sab saum toj (xaiv 2 × 2 nyob rau hauv qab sab laug li pab pawg A nrog rau lwm cov ntxaij vab tshaus teem li 'Single').
   - Nrog rau 2 × 2 nyob rau hauv qab sab xis ntawm 3 × 3, nrog 5x ib tus neeg cov ntxaij vab tshaus rau sab laug thiab sab saum toj (xaiv 2 × 2 nyob rau hauv qab txoj cai raws li pab pawg A nrog rau lwm cov ntxaij vab tshaus teem li 'Single').

Nrog cov example, yuav tsum tau tsim 6 txawv configurations rau lub Video Phab ntsa array, faib cov pab pawg neeg cov ntxaij vab tshaus rau ib pab pawg neeg siv cov xaiv dropdown. Cov Configurations / Pawg tuaj yeem hloov npe raws li qhov xav tau siv qhov kev xaiv 'Hloov Kho Lub Npe' nyob rau hauv pab pawg Configuration screen.
Ntxiv configurations tuaj yeem tsim nrog cov ntxaij vab tshaus muab ua pab pawg. Qhov no tso cai rau ntau qhov video los ua viewed nyob rau tib lub sij hawm thiab yuav tshwm sim raws li Video Phab ntsa nyob rau hauv ib tug Video Wall. Hauv qab no example muaj ob qhov sib txawv Video Walls hauv 3 × 3 array. Qhov kev teeb tsa no muaj 2 pawg:

Web-GUI - Video Phab Ntsa Configuration
Thaum Video Phab Ntsa tau tsim, muaj npe raws li, thiab pab pawg / presets tau raug muab tso tseg, cov phab ntsa Video teeb tsa tuaj yeem ua tau. viewed los ntawm lub ntsiab Video Phab Ntsa Configuration nplooj:

Configurations / presets uas tau tsim nyob rau hauv lub system tam sim no yuav tshwm nyob rau hauv lub Video Phab ntsa Pawg nplooj ntawv. Daim Video Phab Ntsa Configuration nplooj tso cai rau ib pab pawg hloov.
Lub 'Refresh' khawm refreshs nplooj ntawv tam sim no thiab kev teeb tsa ntawm Video Phab Ntsa array tam sim no tau tshwm sim.
Qhov no yog qhov muaj txiaj ntsig tshwj xeeb thaum kuaj Video Phab Ntsa teeb tsa cov lus txib los ntawm tus neeg sab nrauv tswj qhov system.
Thov saib cov lus txib API siab heev rau kev siv nrog lwm tus neeg tswj lub tshuab rau Video Phab ntsa tswj, Kev hloov pauv thiab pab pawg xaiv uas muaj los rub tawm los ntawm Blustream webqhov chaw.

Web-GUI - Cov neeg siv

ACM muaj peev xwm rau ib tus neeg siv nkag mus rau hauv web-GUI ntawm Multicast system thiab nkag mus rau tus kheej qhov chaw / thaj chaw ntawm lub kaw lus, rau kev tswj hwm tag nrho ntawm Multicast system, lossis rau kev tswj yooj yim ntawm qhov twg yog saib hauv cov chaw xaiv nkaus xwb. Rau kev pab teeb tsa Cov Neeg Siv Tshiab, nyem rau ntawm lub pob cim 'Cov Neeg Siv Pab'.
Txhawm rau teeb tsa tus neeg siv tshiab, nyem 'Tus Neeg Siv Tshiab' nyob rau sab saum toj ntawm lub vijtsam:

Nkag mus rau tus neeg siv daim ntawv pov thawj tshiab rau hauv lub qhov rai uas tshwm thiab nyem 'Tsim' ib zaug ua tiav:

Tus neeg siv tshiab yuav tshwm sim hauv Cov Neeg Siv Cov Ntawv Qhia nplooj ntawv npaj rau kev nkag / kev tso cai los teeb tsa:

Txhawm rau xaiv tus neeg siv kev tso cai, hloov kho tus neeg siv tus password, lossis tshem tawm Tus Neeg Siv los ntawm Multicast system, nyem lub pob 'Ua Haujlwm'.

Cov kev xaiv tso cai muab kev nkag mus rau xaiv qhov twg Transmitters lossis Receivers tus neeg siv tuaj yeem pom hauv lawv cov nplooj ntawv tswj (Drag & Drop Control, thiab Video Wall Control). Nrog rau tag nrho cov thawv kos ib sab ntawm txhua lub Transmitter lossis Receiver, Tus Neeg Siv tuaj yeem ua ntejview thiab hloov mus rau tag nrho cov system. Yog tias Tus Neeg Siv tsuas tuaj yeem tswj tau ib qho screen / receiver, ces uncheck tag nrho lwm tus txais. Ib yam li ntawd, yog tias tus neeg siv tsis raug muab nkag mus rau ib qho (lossis ntau dua) cov khoom siv, cov Transmitters no yuav tsum tsis raug kuaj xyuas.
Qhov twg muaj Video Phab Ntsa array hauv Multicast system, tus neeg siv yuav xav tau nkag mus rau TAG NRHO cov neeg txais kev cuam tshuam kom tau txais kev hloov pauv ntawm Video Phab Ntsa. Yog tias tus neeg siv tsis tuaj yeem nkag mus rau txhua tus Txais, Video Phab Ntsa yuav tsis tshwm sim hauv nplooj Video Phab Ntsa Tswj.

Thaum cov neeg siv kev tso cai raug xaiv, nyem 'Hloov kho' los siv cov chaw.
Thov nco ntsoov: txhawm rau txwv tsis pub nkag mus rau qhov kev nyab xeeb web interface (piv txwv li tsis muaj lo lus zais), tus ' qhua' tus account yuav tsum raug muab tshem tawm tom qab tus neeg siv tshiab nrog kev nkag mus rau qhov chaw / cov ntxaij vab tshaus siv teeb tsa. Txoj kev no, txhua tus neeg siv ntawm lub kaw lus yuav tsum nkag mus rau tus password kom tau txais kev hloov pauv ntawm qhov system.

Web-GUI - Chaw

Cov nplooj ntawv chaw ntawm ACM yuav muab ib qho dhauview ntawm cov kev teeb tsa dav dav, thiab tswj / video network teeb tsa ntawm chav tsev nrog lub peev xwm los hloov kho thiab hloov kho chav tsev raws li.

Lub 'Clear Project' tshem tawm tag nrho cov Transmitters, Receivers, Video Walls thiab cov neeg siv uas tau tsim los ntawm qhov project tam sim no file muaj nyob hauv ACM. Paub meej los ntawm kev xaiv 'Yog'.
Thov nco ntsoov: Tus Tshiab Project Setup Wizard yuav tshwm sim tom qab siv 'Clear Project' muaj nuj nqi. Yuav tsum muaj qhov project txuag file tsis tau tsim ua ntej tshem qhov project, nws tsis tuaj yeem rov qab kho qhov system tom qab qhov no.

Qhov 'Reset ACMxxx' kev xaiv tso cai rau cov hauv qab no:

1. Pib dua System rau lub Hoobkas default (tsis suav nrog Network nqis)
2. Pib dua Network rau qhov chaw pib (tsis suav nrog System settings)
3. Pib dua ALL System thiab Network nqis rov qab mus rau lub Hoobkas pib

Hauv kev teeb tsa dav dav, 'Hloov kho' kev xaiv tso cai rau cov hauv qab no:

1. Tig / Tawm IR tswj kom pab / lov tes taw IR input ntawm ACM los ntawm kev lees txais IR cov lus txib los ntawm lwm tus neeg tswj kev daws teeb meem.
2. Hloov kho tus xov tooj Telnet chaw nres nkoj uas Control chaw nres nkoj ntawm ACM sib txuas lus los ntawm. Tus lej chaw nres nkoj siv tau yog chaw nres nkoj 23 uas yuav siv rau txhua tus neeg ua haujlwm Blustream thib peb tus neeg tsav tsheb.
3. Hloov kho RS-232 Baud Rate ntawm DB9 kev sib txuas ntawm ACM kom haum rau tus neeg sab nrauv tswj processor. Lub neej ntawd Baud tus nqi siv yog: 57600.

Qhov chaw nyob IP ntawm ob qhov chaw nres nkoj RJ45 ntawm ACM tuaj yeem hloov kho nrog tus kheej IP, Subnet thiab Gateway chaw nyob. Siv 'Hloov Kho' khawm rau Control Network lossis Video Network hloov kho cov ntaub ntawv rau cov chaw nres nkoj xav tau. Lub Chaw Tswj Xyuas tuaj yeem teeb tsa rau DHCP los ntawm kev xaiv 'On':

TSEEM CEEB: Kev hloov kho Video Network IP Chaw nyob tawm ntawm 169.254.xx ntau yam yuav nres kev sib txuas lus ntawm ACM thiab Multicast Transmitters thiab Receivers uas tau teeb tsa ua ntej. Txawm hais tias ACM tuaj yeem txav tawm ntawm qhov kev pom zoo, IP chaw nyob ntawm TAG NRHO Transmitters thiab Receivers yuav tsum tau hloov kho rau tib tus IP ntau yam los xyuas kom meej kev sib txuas thiab kev tswj hwm ntawm Multicast system. Tsis pom zoo.

Web-GUI - Hloov kho firmware

Nplooj ntawv hloov tshiab firmware tso cai rau firmware hloov tshiab ntawm:

• The ACM Unit
• Multicast Transmitter thiab Receiver units

Thov nco ntsoov: firmware tej pob khoom rau ACM, Multicast Transmitter thiab Receiver khoom yog tus kheej. Nws raug pom zoo tias kev hloov kho firmware tsuas yog ua tiav los ntawm lub desktop lossis laptop PC uas nyuaj-wired rau hauv lub network.
Kev hloov kho ACM:
Download tau ACMxxx Firmware file (.bin/.img) los ntawm Blustream website rau koj lub computer.

Nyem rau ntawm lub pob ntawv cim 'Upload ACMxxx Firmware'

Xaiv lub [ACMxxx].bin/.img file twb downloaded rau koj lub computer rau lub ACM. Cov file yuav cia li upload rau ACM uas yuav siv sij hawm li ntawm 2-5 feeb kom tiav. Nplooj ntawv refreshes rau nplooj ntawv Drag & Drop ib zaug ua tiav.

Nplooj ntawv hloov kho Firmware kuj tseem siv rau firmware kho dua tshiab firmware ntawm Blustream Transmitters lossis Receivers.
Nplooj ntawv tso cai rau ntau lub Transmitter, lossis, txais cov chav txais yuav hloov kho dua tshiab (xws li txhua tus txais ib zaug, lossis, tag nrho Transmitters ib zaug - tsis yog ob qho tib si ib txhij).
Cov firmware tam sim no tshaj plaws rau Multicast Transmitters thiab Receivers tuaj yeem rub tawm los ntawm Blustream webqhov chaw.

Mus upload lub firmware files, nyem lub pob cim 'Upload TX lossis RX Firmware', tom qab ntawd 'Xaiv Files'. Thaum qhov tseeb firmware (.bin) file tau raug xaiv los ntawm lub computer, lub firmware yuav upload rau ACM.
Thov nco ntsoov: qhov no ntawm qhov kev txhim kho no tsis upload lub firmware rau hauv TX lossis RX units, nws tsuas yog uploads rau ACM npaj rau xa mus rau TX lossis RX.

TSEEM CEEB: Tsis txhob kaw lossis taug kev deb ntawm qhov upload thaum tab tom ua haujlwm kom tsis txhob muaj cov ntaub ntawv firmware ploj thaum hloov mus rau ACM.
Thaum ua tiav cov firmware files tau muab tso rau hauv ACM, ib qho kev ceeb toom yuav tshwm sim ntawm qhov screen los tawm tswv yim txog kev ua tiav ntawm kev upload.
Txhawm rau ua kom tiav qhov kev hloov kho tshiab ntawm lub firmware ntawm ob qho tib si Multicast Transmitter, lossis rau Cov Txais Txais, nyem lub pob khawm cim 'Hloov kho' ntawm ib sab ntawm cov Transmitter lossis Receiver.
Thov nco ntsoov: Nws tsuas yog tuaj yeem hloov kho Transmitters, lossis txais txais ib zaug (IP200UHD / IP250UHD / IP300UHD / IP350UHD). Rau IP50HD, firmware hloov tshiab tuaj yeem raug thawb tawm mus rau ntau TX lossis RX units ib txhij.
Peb xav kom ib txwm ua nyuaj xaim rau lub network thaum firmware hloov kho chav nyob kom txo qis kev pheej hmoo ntawm kev sib txuas lus ntawm kev sib txuas wireless.

TSEEM CEEB: Tsis txhob cuam tshuam ACM lossis TX / RX units thaum lub sijhawm hloov kho cov txheej txheem tseem tab tom ua kom tsis txhob muaj cov ntaub ntawv firmware ploj thaum hloov mus rau tus neeg xa xov / txais cov khoom siv.

Hloov tshiab Password

Tus Admin lo lus zais rau ACM tuaj yeem hloov kho rau tus lej lej lej los ntawm kev ntxig cov ntawv pov thawj tshiab hauv qhov kev xaiv zaub mov pop-up. Nyem 'Update Password' kom paub meej tias:

TSEEM CEEB: Thaum tus Admin lo lus zais tau hloov lawm, nws tsis tuaj yeem rov qab los ntawm Tus Neeg Siv. Yog tias Admin lo lus zais tsis nco qab lossis ploj lawm, thov hu rau ib tus tswv cuab ntawm Blustream Technical Support pab neeg uas yuav tuaj yeem pab rov qab los ntawm Admin txoj cai ntawm chav tsev. Saib email chaw nyob hauv qab no:

RS-232 (Serial) Routing

Multicast system nta ob txoj hauv kev los tswj RS-232 cov lus txib:
Hom 1 – Kho Routing:
Ib txoj hauv kev ruaj khov zoo li qub rau kev faib ob txoj kev RS-232 cov lus txib ntawm Multicast Transmitter rau ib tus neeg txais ntau (Tswj Routing). Tsau routing tuaj yeem sab laug zoo li qub ntawm ob lossis ntau yam khoom raws li kev sib txuas mus tas li rau kev hloov pauv ntawm RS-232 tswj cov ntaub ntawv, qhov no tau teeb tsa siv cov ntawv qhia zaub mov ruaj khov ntawm ACM.
Hom 2 – Guest Mode:
Tso cai rau RS-232 kev sib txuas ntawm ib lub cuab yeej xa mus rau IP network (IP / RS-232 hais kom ua hauv, rau RS-232 tawm). Hom 2 Guest Mode muab cov kev tswj xyuas thib peb muaj peev xwm xa RS-232 lossis IP hais kom ua rau ACM thiab RS-232 cov lus txib kom xa tawm ntawm tus txais lossis Transmitter raws li qhov tshwm sim. Qhov IP no rau RS-232 signaling, tso cai rau tus neeg sab nraud tswj qhov system kom muaj kev tswj hwm ntawm ntau yam RS-232 li muaj cov txais thiab Transmitters, los ntawm kev sib txuas network mus rau ACM.
Muaj ob txoj hauv kev ua kom hom 2 - Guest Mode:

1. Kev siv ACM web-GUI los ntawm Transmitters thiab Receiver Action tabs.
2. Los ntawm cov lus txib teem raws li cov lus qhia hauv qab no. Cov lus txib kom teeb tsa kev sib txuas yog: IN / OUT xxx SG ON

RS-232 Guest Mode Kev Sib Txuas los ntawm Thib Peb Pawg Tswj Xyuas:
Thaum siv Guest Mode ntawm ntau yam khoom siv hauv ib lub kaw lus, peb xav kom tig Guest Mode rau thiab tawm thaum xav tau. Qhov no yog vim hais tias cov lus txib raug xa mus rau hauv ACM yuav dhau mus rau TXHUA cov khoom siv uas muaj Guest Mode enabled.

1. Txhawm rau qhib Guest Mode kev sib txuas ntawm ACM thiab IPxxxUHD-TX lossis RX chav tsev cov lus txib hauv qab no yuav tsum raug xa los ntawm IP lossis RS-232:
   

   INxxxGUEST	Txuas rau TX xxx hauv Guest Mode los ntawm ACM
   OUTxxxGUEST	Txuas rau RX xxx hauv Guest Mode los ntawm ACM
   Example:	Transmitter kaum yog ID 010, lub ntsiab lus 'IN010GUEST' yuav tso cai rau ob-directional Serial / IP cov lus txib xa tuaj ntawm ACM thiab Transmitter 10.

2. Thaum ib qho kev sib txuas tau tsim, txhua tus cim uas raug xa los ntawm ACM yuav raug xa mus rau Transmitter lossis Receiver txuas, thiab rov ua dua.
3. Txhawm rau kaw qhov kev sib txuas, xa cov lus txib: CLOSEACMGUEST

Specifications

ACM200 & ACM210:

• Ethernet chaw nres nkoj: 2x LAN RJ45 connector (1x PoE kev them nyiaj yug)
• RS-232 serial chaw nres nkoj: 1x DB-9 poj niam
• RS-232 & I/O chaw nres nkoj: 1x 6-pin Phoenix connector (tso tseg rau yav tom ntej siv)
• IR input chaw nres nkoj: 1 x 3.5mm lub tso suab tso suab
• Dimensions (W x D x H): 96mm x 110mm x 26mm
• Shipping hnyav (Kit): 0.6kg
• Ua haujlwm kub: 32 ° F txog 104 ° F (0 ° C txog 40 ° C)
• Cia kub: -4 ° F txog 140 ° F (-20 ° C txog 60 ° C)

Ntim Cov Ntsiab Lus

• 1 x ACM200 / ACM210
• 1 x IR tswj cable - 3.5mm txog 3.5mm lub tso suab rau mono cable
• 1 x 6-pin phoenix connector
• 1 x Mounting cov khoom siv

Kev tu

Ntxuav chav tsev no nrog ib daim ntaub mos, qhuav. Tsis txhob siv cawv, pleev xim pleev xim lossis benzene los ntxuav chav tsev no.

Blustream Infrared Commands
Blustream tau tsim 16x input & 16x tso zis IR commands tso cai xaiv qhov chaw mus txog 16x Transmitters mus txog 16x Receivers. Cov no txawv ntawm qhov kev hloov pauv ntawm kev tswj hwm xa mus rau Multicast Receiver.
Rau cov tshuab loj dua 16x cov khoom siv, thov siv RS-232 lossis TCP / IP tswj.
Rau cov ntaub ntawv tiav ntawm Multicast IR cov lus txib, thov mus saib Blustream webnplooj ntawv site rau txhua yam khoom Multicast, nyem rau ntawm "Drivers & Protocols" khawm, thiab mus rau lub nplaub tshev hu ua "Multicast IR Control".

RS-232 thiab Telnet Commands

Blustream Multicast system tuaj yeem tswj tau ntawm serial thiab TCP / IP. Thov xa mus rau RS-232 nplooj ntawv txuas mus rau qhov pib ntawm phau ntawv no rau kev teeb tsa thiab pin tawm. Rau ACM200 thiab ACM210, muaj ib tus neeg API Cov Ntaub Ntawv availabel mus rub tawm los ntawm Blustream website uas npog tag nrho cov lus txib uas tuaj yeem xa los ntawm TCP / IP lossis Serial mus rau chav nyob.
Feem ntau yuam kev

• Carriage return - Qee qhov kev pab cuam tsis tas yuav xa rov qab rau lub tsheb thauj khoom uas yog lwm yam yuav tsis ua haujlwm tshwj tsis yog xa ncaj qha tom qab txoj hlua. Nyob rau hauv cov ntaub ntawv ntawm ib co Terminal software lub token yog siv los ua qhov kev thauj mus los. Nyob ntawm qhov kev pab cuam koj siv lub token no tej zaum txawv. Ib co examples uas lwm cov kev tswj hwm siv suav nrog \r lossis 0D (hauv hex).
• Chaw - ACM200 tuaj yeem ua haujlwm nrog peb yam tsis muaj chaw. Nws tsuas ignores lawv. Nws tuaj yeem ua haujlwm nrog 0 txog 4 tus lej.eg: 1 yog tib yam li 01, 001, 0001
  - Yuav ua li cas txoj hlua yuav tsum saib yog raws li hauv qab no OUT001FR002
  - Txoj hlua yuav zoo li cas yog qhov chaw yuav tsum tau los ntawm kev tswj hwm: OUT{Space}001{Space}FR002
• Baud Rate lossis lwm yam kev cai raws tu qauv tsis raug

Thov nco ntsoov: Qhov siab tshaj plaws ntawm Transmitters (yyy) thiab Receivers (xxx) = 762 li (001-762)
- Receivers (outputs) = xxx
– Transmitters (cov) = yyy
– Scaler Output = rr
– EDID Input settings = zz
– Baud Rate = nr
– GPIO input/output ports = gg

Rau ib daim ntawv teev tag nrho cov lus txib API rau ACM200 thiab ACM210, thov saib cais Advanced Control Module API Cov ntaub ntawv luam tawm ntawm Blustream webqhov chaw.

Status tswv yim samples
Command: STATUS
STATUS tawm tswv yim muab ib qho dhauview ntawm lub network ACM txuas nrog:
============================================ ==============
IP Control Box ACM200 Cov ntaub ntawv xwm txheej
FW Version: 1.14
Lub zog IR Baud
ua 57600
Hauv EDID IP NET/Sig
001 DF009 169.254.003.001 Rau /On
002 DF016 169.254.003.002 Rau /On
Tawm ntawm Hauv IP NET / HDMI Res Hom
001 001 169.254.006.001 On/off 00 VW02
002 002 169.254.006.002 On/off 00 VW02
LAN DHCP IP Gateway SubnetMask
01_POE Off 169.254.002.225 169.254.002.001 255.255.000.000
02_CTRL Tawm 010.000.000.225 010.000.000.001 255.255.000.000
Telnet LAN01 MAC LAN02 MAC
0023 34:D0:B8:20:4E:19 34:D0:B8:20:4E:1A
============================================ ==============
Hais kom ua: OUT xxx STATUS
OUT xxx STATUS tawm tswv yim muab ib qho dhauview ntawm cov zis (Receiver: xxx). Xws li: firmware, hom, tsau routing, npe thiab lwm yam.
============================================ ==============
IP Control Box ACM200 Cov ntaub ntawv tso zis
FW Version: 1.14
Tawm Net HPD Ver Mode Res Rotate Name
001 A7.3.0 VW 00 0 Txais 001
Fast Fr Vid/Aud/IR_/Ser/USB/CEC HDR MCas
001 001/004/000/000/002/000 Rau
CEC DBG Stretch IR BTN LED SGEn/Br/Ntsis
On On Off On On 3 Off / 9 / 8n1
IM MAC
Static 00:19:FA:00:59:3F
IP GW SM
169.254.006.001 169.254.006.001 255.255.000.000 ib
============================================ ==============
Status tswv yim samples
Hais kom ua: hauv xxx STATUS
Ib tshajview ntawm cov tswv yim (Transmitter: xxx). Xws li: firmware, suab, npe thiab lwm yam.
============================================ ==============
IP Control Box ACM200 Cov ntaub ntawv nkag
FW Version: 1.14
Hauv Net Sig Ver EDID Aud MCast Lub Npe
001 Rau Ntawm A7.3.0 DF015 HDMI Ntawm Transmitter 001
CEC LED SGEn/Br/Bit
On 3 Tawm / 9/8n1
IM MAC
Static 00:19:FA:00:58:23
IP GW SM
169.254.003.001 169.254.003.001 255.255.000.000 ib
============================================ ==============
Command: VW STATUS
VW STATUS yuav qhia tag nrho VW raws li txoj cai tawm tswv yim rau Video Wall arrays hauv qhov system. Ntxiv Video Phab Ntsa arrays yuav muaj cov lus qhia ntawm tus kheej xws li 'VW 2 STATUS'.
============================================ ==============
IP Control Box ACM200 Video Phab Ntsa Info
FW Version: 1.14
VW Col Row CfgSel Name
02 02 02 02 Video Phab 2
OutID
001 002
CFG npe
01 Configuration 1
Pab Pawg Ntawm Hauv Screen
A004 H01V01 H02V01 H01V02 H02V02
02 Configuration 2
Pab Pawg Ntawm Hauv Screen
A002 H02V01 H02V02
001 H01V01 H01V02
============================================ ==============

Troubleshooting ACM

Sim siv cov lus qhia hauv qab no los sim ACM yuav tsum muaj kev nyuaj siab thaum siv lub computer los tswj ACM.

1. Txuas lub computer ncaj qha mus rau ACM Control Chaw nres nkoj nrog CAT cable
2. Lub khoos phis tawj yuav tsum nyob rau tib yam li LAN kev sib txuas 1 ntawm lub tshuab ACM (CONTROL network) vim qhov no yuav simulate kev tswj hwm los ntawm lwm tus neeg tswj qhov system (ie Control4, RTI, ELAN thiab lwm yam). Thov saib cov lus qhia nyob tom qab ntawm phau ntawv no rau 'Hloov koj lub computer IP cov ntsiab lus'.
3. Qhib cmd.exe program (Command prompt). Siv cov cuab yeej tshawb nrhiav ntawm lub khoos phis tawj yog tias tsis paub tseeb tias qhov no nyob qhov twg.
4. Nkag mus rau cov kab lus hauv qab no 'Telnet 192.168.0.225'
   Lub qhov rais hauv qab no yuav tshwm sim kom paub meej tias nkag mus rau hauv ACM tiav:

Telnet yuam kev
Yog hais tias cov lus yuam kev: 'telnet tsis raug lees paub tias yog ib qho kev hais kom ua sab hauv lossis sab nraud, kev ua haujlwm tau zoo lossis batch file', qhib Telnet ntawm koj lub computer.
Tsis tuaj yeem pom LAN chaw nres nkoj ntawm ACM
Yog tias tsis tuaj yeem sib txuas lus (ping) cov chaw nres nkoj ntawm ACM, txuas ncaj qha mus rau lub network hloov thiab tsis yog ntawm DHCP modem router los kuaj.
Muaj peev xwm ping cov khoom tab sis tsis nkag los ntawm Telnet kev twb kev txuas
Yog tias tsis tuaj yeem sib txuas lus (ping) cov chaw nres nkoj ntawm ACM, txuas ncaj qha mus rau lub network hloov thiab tsis yog ntawm DHCP modem router los kuaj.

Kho Koj Lub Computer Chaw - Ua kom TFTP & Telnet

Ua ntej siv Blustream ACM Firmware hloov tshiab PC program koj yuav tsum qhib ob qho tib si TFTP thiab Telnet nta ntawm koj lub computer. Qhov no yog ua tiav los ntawm cov kauj ruam hauv qab no:

1. Hauv Windows, mus rau Pib -> Tswj Vaj Huam Sib Luag -> Kev Pabcuam thiab Nta
2. Hauv Cov Kev Pabcuam thiab Cov Ntsiab Lus, xaiv Tig Windows nta rau lossis tawm hauv qhov kev taw qhia ntawm sab laug.
3. Thaum lub qhov rais Features qhov rais populates, scroll down thiab xyuas kom meej "TFTP neeg" thiab "Telnet Client" yog ob qho tib si xaiv.
4. Thaum qhov kev kawm bar puv thiab cov pop up ploj, tus neeg siv TFTP tau qhib.

Kev teeb tsa tus IP chaw nyob ruaj khov hauv Windows 7, 8, 10 lossis 11
Txhawm rau sib txuas lus nrog ACM koj lub khoos phis tawj yuav tsum xub nyob hauv tib qhov chaw IP raws li ACM Control lossis Video LAN chaw nres nkoj. Los ntawm lub neej ntawd cov chaw nres nkoj muaj qhov chaw nyob IP hauv qab no:

Tswj LAN chaw nres nkoj	192.168.0.225
Video LAN chaw nres nkoj	169.254.1.253

Cov lus qhia hauv qab no tso cai rau koj los hloov tus IP chaw nyob ntawm koj lub khoos phis tawj tso cai rau koj sib txuas lus nrog Blustream Multicast cov khoom.

1. Hauv Windows, ntaus 'network thiab sib koom' rau hauv lub thawv tshawb
2. Thaum lub Network thiab Sib koom screen qhib, nyem rau ntawm 'Hloov adapter nqis'.
3. Txoj nyem rau ntawm koj lub Ethernet adapter thiab nyem Properties
4. Hauv Cov Khoom Siv Hauv Cheeb Tsam Kev Sib Txuas Hauv Cheeb Tsam qhov rais qhia txog Internet Protocol Version 4 (TCP/IPv4) ces nyem lub pob Properties.
5. Xaiv lub xov tooj cua khawm Siv qhov chaw nyob IP hauv qab no thiab nkag mus rau hauv qhov tseeb IP, Subnet mask, thiab Default gateway uas sib haum nrog koj lub network teeb tsa.
6. Nias OK thiab kaw tawm ntawm txhua qhov screen network. Tam sim no koj tus IP chaw nyob tau raug kho lawm.

Sau ntawv…

www.blustream.co.uk
www.blustream.com.au
www.blustream-us.com

Cov ntaub ntawv / Cov ntaub ntawv

BLUSTREAM ACM200 Multicast Advanced Control Module [ua pdf] Tus neeg siv phau ntawv ACM200 Multicast Advanced Control Module, ACM200, Multicast Advanced Control Module, Advanced Control Module, Tswj Module, Module

Cov ntaub ntawv

• Cov neeg siv phau ntawv