I-BA-RCV-BLE-EZ-BAPI Isamkeli esingenazingcingo kunye neemodyuli ze-Analog Output

Ulwazi lweMveliso

Iinkcukacha

• Imveliso: I-Wireless Receiver kunye ne-Analog Output Modules
• Inombolo yoMzekelo: 50335_Wireless_BLE_Receiver_AOM
• Ukuhambelana: Isebenza kunye ne-32 sensors kunye ne-127 iimodyuli ezahlukeneyo

Ngaphezuluview
I-Wireless Receiver evela kwi-BAPI ifumana iimpawu ezivela kwiinzwa ezingenazintambo kwaye idlulisela idatha kwiiModyuli zokuPhuma kwe-Analog nge-RS485 ibhasi ye-wire ezine. Iimodyuli ziguqula umqondiso ukuchasana kwe-analog, voltage, okanye udlulise unxibelelwano lomlawuli.

Misela iModyuli yokuPhumayo (SOM)
I-SOM iguqula idatha ye-setpoint kwi-sensor ye-wireless room ibe yinkcaso okanye i-voltage. Inika iivolthi ezihlanu eziseti kwimizi-mvelisotage kunye noluhlu oluxhathisayo ngemisebenzi ekhethiweyo yokubhala ngaphezulu.

Imodyuli yokuPhucula (RYOM)
I-RYOM iguqula idatha kwi-receiver engenazingcingo ibe yi-slid-state yokuvalwa kokutshintsha komlawuli we-DDC. Inokuthi iqwalaselwe njengomzuzwana okanye i-latching output relay.

Imiyalelo yokusetyenziswa kwemveliso

Ukudityaniswa kweSensom, uMfumani, kunye neeModyuli zokuPhuma

Ukumatanisa iSeva kuMfumani

1. Khetha isixhobo soluvo ukuze udibanise kwaye usebenzise amandla kuso.
2. Faka amandla kumamkeli. I-LED eluhlaza okwesibhakabhaka iya kukhanya.
3. Cofa kwaye ubambe iqhosha leNkonzo kumamkeli de i-LED eluhlaza iqale ukudanyaza. Emva koko cofa iqhosha leNkonzo.

Ii-FAQs

Zingaphi izixhobo zoluvo ezinokuthathwa ngumamkeli?
Umamkeli unokwamkela ukuya kuthi ga kwi-32 sensors.

I-Wireless Receiver kunye ne-Analog Output Modules

UFakelo kunye neMiyalelo yokuSebenza

Ngaphezuluview kunye nokuchonga

I-Wireless Receiver evela kwi-BAPI ifumana isignali kwi-sensors enye okanye ngaphezulu engenazingcingo kwaye inikezela ngedatha kwiiModyuli ze-Analog Output ngokusebenzisa i-RS485 ibhasi ye-wire ezine. Iimodyuli ziguqula umqondiso kwi-analog resistance, voltagi-e okanye unxibelelwano lokudlulisela umlawuli. Ummkeli unokuhlala ukuya kuma-32 kunye neemodyuli ezahlukeneyo ze-127.

IMODYULI YEZIPHUMO ZOKUCHANA (iROM)
Iguqula idatha yeqondo lokushisa ukusuka kumamkeli ukuya kwi-10K-2, 10K-3, 10K-3 (11K) okanye i-20K ijika le-thermistor. Iyunithi ye-10K-2 inoluhlu oluphumayo lwe-35 ukuya kwi-120ºF (1 ukuya kwi-50ºC). Iyunithi ye-10K-3 inoluhlu oluphumayo lwe-32 ukuya kwi-120ºF (0 ukuya kwi-50ºC). Iyunithi ye-10K-3 (11K) inoluhlu oluphumayo lwe-32 ukuya kwi-120ºF (0 ukuya ku-50ºC). Iyunithi ye-20K inoluhlu lwemveliso ye-53 ukuya kwi-120ºF (12 ukuya kwi-50ºC). Uluhlu oluthile lwemveliso luboniswa kwileyibhile yemveliso.

UMQULUTAGIMODULI EPHUMAYO (VOM)
Iguqula iqondo lobushushu okanye ukufuma idata ukusuka kumamkeli ibe linear 0 ukuya 5 okanye 0 ukuya 10 uphawu VDC. Imodyuli inesibhozo sokuseta iqondo lokushisa kwefektri, kwaye uluhlu oluthile luboniswa kwileyibhile yemveliso. Uluhlu lu: 50 ukuya ku-90ºF (10 ukuya ku-32°C), 55 ukuya kuma-85°F (13).
ukuya ku-30°C), 60 ukuya ku-80°F (15 ukuya ku-27°C), 65 ukuya ku-80°F (18 ukuya ku-27°C), 45 ukuya ku-96°F (7 ukuya ku-35°C), –20 ukuya ku-120°F (-29 ukuya ku-49°C), 32 ukuya ku-185 0                                                                                                                           </                                                       </</ u (-85 ukuya ku-40 ° C).
Imodyuli ineendlela ezimbini zokufuma kwe-0 ukuya kwi-100% okanye i-35 ukuya kwi-70% RH kwaye uluhlu oluthile luboniswe kwileyibhile.

IMODYULI YESIPHUMO ESIBEKWE (SOM)
Iguqula idatha ye-setpoint kwi-sensor yegumbi engenazingcingo ibe yinkcaso okanye i-voltage. Kukho iiseti zomzi-mveliso ezintlanu voltagi-e kunye noluhlu oluchasayo, nganye inomsebenzi okhethiweyo wokukhuphela ngaphandle. UmqulutagUluhlu lwe-e luyi-0 ukuya ku-5V, 3.7 ukuya ku-0.85V, 4.2 ukuya ku-1.2V, 0 ukuya ku-10V kunye no-2 ukuya ku-10V. Uluhlu oluchasayo luyi-0 ukuya kwi-10KΩ, 0 ukuya ku-20KΩ, 4.75K ukuya kwi-24.75KΩ, 6.19K ukuya kwi-26.19KΩ, 7.87K ukuya kwi-27.87KΩ. Uluhlu oluthile luboniswa kwileyibhile yemveliso.

IMODYULI YESIPHUMO SOKUNIKEZELELA (RYOM)
Iguqula idatha esuka kumamkeli ongenazingcingo ibeyimeko eqinileyo yokuvala isilawuli seDDC. I-RYOM ngumthengi-ubumbeko okwethutyana okanye i-latching output relay. Iyakwazi ukuqeqeshwa kwii-BLE ezahlukeneyo ze-wireless sensors ezifana nokugqithisa kwi-BAPI-Stat "Quantum" yegumbi le-sensor, i-magnetic door switch kwi-BAPI-Stat "Quantum Slim" okanye ukukhutshwa komtshini wokuvuza kwamanzi.

Ukudityaniswa kweSensom, uMfumani kunye neeModyuli zokuPhuma kweAnalog

Inkqubo yofakelo ifuna ukuba inzwa nganye engenazingcingo idityaniswe kumamkeli wayo adityanisiweyo kwaye emva koko kwimodyuli yemveliso ehambelanayo okanye iimodyuli. Inkqubo yokudibanisa ilula kakhulu kwibhentshi yovavanyo kunye nenzwa, umamkeli kunye neemodyuli zemveliso ngaphakathi kokufikelela kwengalo enye kwenye. Qinisekisa ukuba ubeke uphawu olulodwa lokuchonga kwi-sensor kunye nemodyuli ehambelana nayo yemveliso okanye iimodyuli emva kokuba zidibene enye kwenye ukuze zichongwe kwindawo yomsebenzi. Ukuba ngaphezulu koguqulo olunye luthuthwa sisiva (ubushushu, ukufuma kunye nendawo yokumisela umzekelo), uguqulo ngalunye lufuna imodyuli yemveliso eyahlukileyo. Iimodyuli zemveliso ezininzi zinokudityaniswa kuguquko olufanayo ukuba zifunwa.

UKUBANGANISA IVANYO KUMMNIKI
Kufuneka udibanise i-sensor kumamkeli phambi kokubhanqa i-sensor kwimodyuli yemveliso ye-analog.

1. Khetha umenzi woluvo onqwenela ukubhanqa umamkeli. Faka amandla kuluvo. Jonga imanyuwali yayo ngemiyalelo eneenkcukacha.
2.  Faka amandla kumamkeli. I-LED eluhlaza okwesibhakabhaka kwi-receiver iya kukhanya kwaye ihlale ikhanya.
3. Cinezela kwaye ubambe "Iqhosha leNkonzo" phezulu kommkeli de kube i-LED eluhlaza okwesibhakabhaka iqala ukukhanya, i-Fig. 1: I-Receiver kunye ne-Output Modules Service Buttons uze ucinezele kwaye ukhulule "Iqhosha leNkonzo" kwi-sensor (Figs 2 & 3) ofuna ukuyidibanisa nomntu owamkelayo. Xa i-LED kwi-receiver ibuyela kwi-"On" eqinile kunye nohlaza "Inkonzo ye-LED" kwibhodi yesekethe ye-sensor ibhobhoza ngokukhawuleza kathathu, ukudibanisa kuphelile. Phinda le nkqubo kubo bonke abenzi boluvo.

UKUBANISA IMODYULI EPHUMAYO KWISIVAMVA
Nje ukuba inzwa idityaniswe kumamkeli, ungabhanqa iimodyuli zokuphuma kwi-variable ye-sensor.

1. Khetha imodyuli yokuphuma kwi-sensor efunwayo eguquguqukayo kunye noluhlu kwaye uqhagamshele kumamkeli ongenazintambo (Umfanekiso 1).
2. Cinezela kwaye ubambe "Iqhosha leNkonzo" phezulu kwimodyuli yokuphuma de i-LED eluhlaza iqale ukukhanyisa (malunga nemizuzwana emi-3). Emva koko, thumela "uphawu lothumelo lokubhanqa" kuloo modyuli yokuphuma ngokucofa kwaye ukhulule "iqhosha leNkonzo" kwinzwa engenazingcingo. I-LED eluhlaza okwesibhakabhaka kwi-receiver iya kudanyaza kanye ibonise ukuba usulelo lufunyenwe; emva koko i-LED eluhlaza okwesibhakabhaka kwimodyuli yokuphuma iya kuhamba ngokuqinileyo malunga ne-2 sensor kunye nemodyuli yemveliso ngoku idityaniswe enye kwenye kwaye iya kuhlala idityaniswe enye kwenye ngokutshintshwa kwebhetri okanye ukuba amandla asusiwe kwiiyunithi zamandla ocingo. Imodyuli ephumayo ye-LED eluhlaza ngoku iya kukhanya kube kanye xa ifumana ukuhanjiswa kwinzwa.

Qaphela: Abenzi boluvo abangenazingcingo bahlala belinganisa kwaye basasaza izinto ezahlukeneyo, ezinje ngeqondo lobushushu kunye nokufuma, okanye ubushushu, ukufuma kunye nendawo yokubeka. Zonke ezi ziguquguqukayo zihanjiswa xa isivamvo "Iqhosha leNkonzo" licinezelwe. Nangona kunjalo, imodyuli nganye ye-Analog yeSiphumo iqwalaselwe ngexesha locwangco kuguquko oluthile kunye noluhlu ngoko iyakubhanqa kuphela koguquko hayi ezinye.

Ukunyuka kunye nokuBekwa kwe-Antenna

I-eriyali inesiseko sozibuthe sokuxhoma. Nangona umamkeli unokufumaneka ngaphakathi kwendawo ebiyelweyo yentsimbi, i-eriyali kufuneka ibe ngaphandle kwendawo ebiyelweyo. Kufuneka kubekho umgca wokubona ongeyiyo owentsimbi ukusuka kuzo zonke iinzwakazi ukuya kwi-eriyali. Umgca owamkelekileyo wokubona uquka iindonga ezenziwe ngomthi, ilitye leshidi okanye i-plaster ene-non-metallic lath. Ukuqhelaniswa kwe-antenna (ethe tye okanye ethe nkqo) nayo iya kuchaphazela ukusebenza kwaye iyahluka ngokusetyenziswa.
Ukuxhoma i-eriyali kumphezulu wesinyithi kuya kunqumla ulwamkelo emva komphezulu. Iifestile ezikhenkcezayo zinokuvalela ukungena kwakhona. Umtya owenziwe ngomthi okanye weplastiki odityaniswe kumqadi wesilingi wenza intaba enkulu. I-eriyali inokuxhonywa kuyo nayiphi na isilingi kusetyenziswa ifayibha okanye iplastiki twine. Musa ukusebenzisa ucingo ukuxhoma, kwaye musa ukusebenzisa imitya yesinyithi enemingxuma, ebizwa ngokuba yi tape ye-plumbers.

Ukunyuswa kwe-Receiver kunye ne-Analog Output modules

Ummkeli kunye neemodyuli eziphumayo zinokuba yi-snaptrack, i-DIN Rail okanye i-surface mounted. Umamkeli ngamnye unokwamkela ukuya kuthi ga kwiimodyuli ze-127. Qala ngomamkeli ekhohlo kude, emva koko uqhoboshele ngokukhuselekileyo imodyuli nganye yemveliso ngasekunene.
Tyhila iithebhu zokunyusela ezibhlowu ukuze unyuke nge-2.75” snaptrack (Fig 4). Tyhiliza ngaphandle iithebhu zokunyusela zeDIN kaloliwe (umfanekiso wesi-5). Bamba ihuku yokuxhoma ye-EZ kumda we-DIN kaloliwe (umfanekiso wesi-6) kwaye ujikelezise kwindawo. Tyhiliza ngaphandle iithebhu zokunyuswa komphezulu usebenzisa izikrufu ezine ezibonelelweyo, enye kwithebhu nganye (umfanekiso wesi-7).
Ukuba iimodyuli zakho zemveliso azinakungena kumgca omnye othe ngqo ngenxa yendawo enyiniweyo, nyusa umtya wesibini weemodyuli ngaphezulu okanye ngaphantsi. Xhuma iingcingo ukusuka kwicala lasekunene lomtya wokuqala weemodyuli ukuya kwicala lasekhohlo lomtya wesibini weemodyuli.
Olu lungelelwaniso lufuna enye okanye ezingaphezulu eziPluggable Terminal Block Connector Kits (BA/AOM-CONN) ukwenzela ukupheliswa kocingo olongezelelweyo kwicala lasekhohlo nasekunene leeModyuli zeZiphumo zeAnalog.
Ikhithi nganye ibandakanya isethi enye yezihlanganisi ezi-4.

Ukupheliswa

I-Wireless Receiver kunye ne-Analog Output Modules ziplagi kwaye zinokudityaniswa kumtya oqhotyoshelweyo njengoko kubonisiwe ekunene. Amandla eemodyuli zemveliso ye-analog anikezelwe ngumamkeli kolu qwalaselo. Ukuba iimodyuli zinikwe amandla ngokwahlukileyo kunokuba zivela kummkeli (njengoko kuboniswe ngezantsi), ngoko kufuneka babe ne-15 ukuya kwi-40 VDC kuphela. Qinisekisa ukuba unikezela ngamandla awoneleyo kuzo zonke izixhobo ezisebhasini.

Ukwandiswa kwe-RS485 Network phakathi kwe-Receiver kunye ne-Analog Output Modules

Iimodyuli ze-Analog Output zinokunyuswa ukuya kuthi ga kwii-4,000 ezinyaweni ukusuka kummkeli. Ubude obupheleleyo bazo zonke iintambo ezikhuselweyo, eziphothiweyo eziboniswe kwiSazobe se-10
yi 4,000 feet (1,220 metres). Qhagamshela iitheminali kunye njengoko kubonisiwe kumfanekiso we-10.tagi-e converter (efana ne-BAPI's VC350A EZ) yelo qela le-Analog Output Modules. Qaphela: Ulungelelwaniso olukuFig 10 lufuna iKits enye okanye ezininzi eziPluggable Terminal Block Kits njengoko kubonisiwe kwiphepha elidlulileyo.

Ummkeli Tshintshela Izicwangciso

Zonke iisetingi zoluvo zilawulwa kwaye zihlengahlengiswa ngummkeli ukuze zihambelane neemfuno zofakelo. Ezi zilungelelaniswa ngokutshintsha kwe-DIP phezulu kommkeli. Olu luseto lwazo ZONKE IIMVA ZOVAVANYO ezidityaniswe kulo mamkeli.

Sample Rate/Ithuba – Ixesha phakathi kokuvuka kwenzwa kwaye ithatha ukufunda. Amaxabiso akhoyo 30 sec, 1 min, 3 min okanye 5 min.
Ireyithi yokuThutha / iIthuba - Ixesha eliphakathi xa inzwa idlulisela ukufundwa kumamkeli. Amaxabiso akhoyo yi-1, 5, 10 okanye 30 imizuzu.
Ubushushu beDelta – Utshintsho kwiqondo lobushushu phakathi kweampi-le kunye nokuhanjiswa kokugqibela okuya kubangela ukuba inzwa igqithise ixesha lokuhambisa kwaye ngokukhawuleza idlulise ubushushu obutshintshileyo. Amaxabiso akhoyo yi-1 okanye 3 °F okanye °C.
Ukufuma kweDelta - Utshintsho lokufuma phakathi kweampI-le kunye nokuhanjiswa kokugqibela okuya kubangela ukuba i-sensor igqithise ixesha lokuhambisa kwaye ngokukhawuleza idlulise ukufuma okutshintshileyo. Amaxabiso akhoyo yi-3 okanye 5 %RH.

Ukuseta kwakhona iSensom, uMmkeli okanye iModyuli yokuPhuma yeAnalog

Ii-Sensors, abamkeli kunye neemodyuli zemveliso zihlala zidityanisiwe xa amandla ephazamisekile okanye iibhetri zisusiwe. Ukuqhawula amabhondi phakathi kwabo, iiyunithi kufuneka zisetwe ngokutsha njengoko kuchaziwe ngezantsi:

• UKUSETA KHONA IVANYO:
  Cinezela kwaye ubambe "Iqhosha leNkonzo" kwinzwa malunga nemizuzwana engama-30. Ngexesha laloo mizuzwana ye-30, i-LED eluhlaza iya kucima imizuzwana emi-5, emva koko idanyaze kancinci, emva koko iqalise ukudanyaza ngokukhawuleza. Xa ukudanyaza ngokukhawuleza kuyeka, ukuseta kwakhona kugqityiwe. Inzwa ngoku inokudityaniswa kumamkeli omtsha. Ukubhangqa kwakhona kumamkeli omnye, kufuneka usete ngokutsha umamkeli. Iimodyuli zemveliso ebezidityaniswe ngaphambili kwisixhobo soluvo akufuneki ziphinde zibhanqe.
• UKUSETA KWAKHONA IMODULI EPHUMAYO:
  Cinezela kwaye ubambe "Iqhosha leNkonzo" phezu kweyunithi malunga nemizuzwana engama-30. Ngexesha laloo mizuzwana ye-30, i-LED eluhlaza okwesibhakabhaka iya kucinywa kwimizuzwana emi-3 yokuqala kwaye ikhanyise ixesha eliseleyo. Xa ukukhanya kuyeka, khulula "Iqhosha leNkonzo" kwaye ukusetha kwakhona kugqityiwe. Iyunithi ngoku inokuphinda idityaniswe kwi-sensor variable.
• UKUSETA KHONA UMAMELI:
  Cinezela kwaye ubambe "Iqhosha leNkonzo" kwinzwa malunga nemizuzwana engama-20. Ngexesha laloo mizuzwana ye-20, i-LED eluhlaza okwesibhakabhaka iya kudanyaza kancinci, emva koko iqalise ukudanyaza ngokukhawuleza. Xa ukudanyaza ngokukhawuleza kuyeka kwaye kubuyela kublowu oqinileyo, ukuseta kwakhona kugqityiwe. Iyunithi ngoku inokuphinda idityaniswe kwiisensom ezingenazingcingo. Isilumkiso! Ukusetha kwakhona umamkeli kuya kuqhawula amabhondi phakathi kommkeli kunye nabo bonke abenzi boluvo. Kuya kufuneka usete kwakhona inzwa nganye kwaye emva koko udibanise kwakhona nganye yezinzwa kummkeli.

Imo eMiselweyo

Ukuba imodyuli yokuphuma ayifumani idatha kwi-sensor yayo eyabelwe imizuzu engama-35, i-LED eluhlaza okwesibhakabhaka phezulu kwimodyuli iya kubetha ngokukhawuleza. Ukuba oku kuyenzeka, i-Analog Output Modules nganye iya kusabela ngolu hlobo lulandelayo:

• IiModyuli zokuPhumelela kweNkxaso (BA / ROM) ziya kuvelisa ukuchasana okuphezulu kuluhlu lwabo lokuphuma.
• Umqulutage IiModyuli zokuPhuma (BA/VOM) ezilinganiswe kwiqondo lobushushu ziya kumisela imveliso yazo ibe yi-0 volts.
• UmqulutagIimodyuli ze-E Output (BA/VOM) ezilinganiswe ukufuma ziyakuseta imveliso yazo ibe yeyona volyumu iphezulutage (5 okanye 10 volts).
• Setpoint Output Modules (BA/SOM) ziya kubamba ixabiso labo lokugqibela ngokungenasiphelo.

Xa ukuhanjiswa kufunyenwe, iimodyuli zokuphuma ziya kubuyela ekusebenzeni okuqhelekileyo kwimizuzwana engama-60 okanye ngaphantsi.

Iinkcukacha zomamkeli

• Unikezelo lwamandla: 15 ukuya kwi-40 VDC okanye i-12 ukuya kwi-24 VAC (ukusuka kwi-half wave rectified supply)
• Ukusetyenziswa kwamandla: 30mA @ 24 VDC, 2.75 VA @ 24 VAC
• Umthamo / iYunithi: Ukuya kuthi ga kwi-32 ye-sensor kunye ne-127 ezahlukeneyo ze-Analog Output Modules
• Umgama woKwamkela:

Iyahluka ngokwesicelo*

• Ukuphindaphinda: 2.4 GHz (iBluetooth Low Energy)

Umgama weCable yebhasi:

• 4,000 ft kunye nekhaka, intambo ejijekileyo

Uluhlu lokuSebenza kokusiNgqongileyo:

• Ixesha lobushushu: 32 ukuya ku-140°F (0 ukuya ku-60°C)
• Ukufuma: 5 ukuya 95% RH non-condensing
• I-Enclosure Material & Rating: ABS Plastic, UL94 V-0
• I-Arhente: RoHS / FCC: T4FSM221104 / IC: 9067A-SM221104

Esi sixhobo sithobela iCandelo le-15 leMithetho yeFCC. Umsebenzi uxhomekeke kwezi meko zimbini zilandelayo:

1. Esi sixhobo asinakubanga uphazamiseko oluyingozi, kunye
2. Esi sixhobo kufuneka samkele naluphi na uphazamiseko olufunyenweyo, kuquka uphazamiseko olunokubangela usetyenziso olungafunekiyo.

Naluphi na utshintsho okanye uhlengahlengiso olungavunywanga ngokucacileyo [yinkampani] lunokutshitshisa igunya lomsebenzisi lokusebenzisa isixhobo.
Esi sixhobo sithobelana ne-Industry Canada (IC) yelayisenisi-imigangatho ye-RSS ekhululiwe. Ukusebenza kuxhomekeke kule miqathango mibini ilandelayo. Esi sixhobo sisenokungabangeli ukuphazamiseka.
Esi sixhobo kufuneka samkele naluphi na uphazamiseko, kuquka uphazamiseko olunokubangela ukusebenza okungafunekiyo kwesixhobo.

IiNkcazo zeModyuli yokuPhuma yeAnalog

ZONKE IIMODULI

• Unikezelo lwaMandla (VDC Kuphela): 15 ukuya kwi-40 VDC (ukusuka kwi-half wave rectified supply)

Uluhlu lokuSebenza kokusiNgqongileyo:

• Ubushushu: 32°F ukuya ku-140°F (0°C ukuya ku-60°C)
• Ukufuma: i-5% ukuya kwi-95% ye-RH engaxinanisi

Umgama weCable yebhasi:

• 4,000 ft (1,220m) w/ ekhuselweyo, intambo ejijekileyo
• I-Enclosure Material & Rating: ABS Plastic, UL94 V-0
• I-Arhente: RoHS

IMODYULI YESIPHUMO ESIBEKWE (SOM)

Ukutya umbane:

• Iimodeli zokuxhathisa: 20 mA @ 24 VDC
• Umqulutage Iimodeli: 25 mA @ 24 VDC
• Imveliso yangoku: 2.5 mA @ 4KΩ umthwalo

Ixesha loNxibelelwano olulahlekileyo:

• 35 imiz. (Fast Flash) : Ibuyela kumyalelo wayo wokugqibela
• I-Analog Input Bias Voltage:
• 10 VDC max (IiModeli zokuChasa iZiphumo kuphela)

Isisombululo Seziphumo:

• Imveliso yokuchasa: 100Ω
• Umqulutage Imveliso: 150µV

• UMQULUTAGIMODULI EPHUMAYO (VOM)
  Ukusetyenziswa kwamandla: 25 mA @ 24 VDC
  Imveliso yangoku: 2.5 mA @ 4KΩ umthwalo
• Ixesha loNxibelelwano olulahlekileyo:
  35 imiz. (Fanyaza ngokukhawuleza)
  Imveliso yobushushu ibuyela kwi-0 volts
  I-%RH imveliso ibuyela kwisikali esiphezulu (5V okanye 10V)
• Imveliso VoltagUluhlu:
  0 ukuya 5 okanye 0 ukuya 10 VDC (factory calibrated)
  Isisombululo Sesiphumo: 150µV
• IMODYULI YEZIPHUMO ZOKUCHANA (iROM)
• Ukutya umbane:
  20 mA @ 24 VDC
  I-Analog Input Bias Voltage: 10 VDC max
• Ixesha loNxibelelwano olulahlekileyo:
  35 imiz. (Fanyaza ngokukhawuleza)
  Buyela kuKuxhathisa okuPhezulu >35KΩ (ITemp ephantsi)
  Uluhlu Lweziphumo Zobushushu:
  Iyunithi ye-10K-2: 35 ukuya ku-120ºF (1 ukuya ku-50ºC)
  Iyunithi ye-10K-3: 32 ukuya ku-120ºF (0 ukuya ku-50ºC)
  10K-3(11K) Iyunithi: 32 ukuya ku-120ºF (0 ukuya ku-50ºC) 20K Iyunithi: 53 ukuya ku-120ºF (12 ukuya ku-50ºC)
  Isisombululo Sesiphumo: 100Ω
• IMODYULI YESIPHUMO SOKUNIKEZELELA (RYOM)
• Ukutya umbane:
  20 mA @ 24 VDC
  I-Analog Input Bias Voltage:
  10 VDC max
• Ixesha loNxibelelwano olulahlekileyo:
  Imizuzu engama-35 (iFlash ekhawulezayo)
  Ibuyela kumyalelo wokugqibela
  Ukudlulisa Iziphumo:
  I-40V (i-DC okanye i-AC peak), i-150 mA max.
  Ngaphandle kobume obuvuza ngoku 1 uA max.
  Kwimeko yokuxhathisa 15Ω max.
• Umsebenzi:
  Okomzuzwana: I-5 yesibini ye-actuation yexeshana

Ulwakhiwo lweeMveliso eziziSebenzisayo, i-Inc., 750 North Royal Avenue, Gays Mills, WI 54631 USA
Umnxeba:+1-608-735-4800 • Ifeksi+1-608-735-4804 • I-imeyile: sales@bapihvac.com • Web : www.bapihvac.com

Amaxwebhu / Izibonelelo

I-BAPI BA-RCV-BLE-EZ-BAPI Isamkeli esingenazingcingo kunye neemodyuli ze-Analog Output [pdf] Isikhokelo soFakelo BA-RCV-BLE-EZ-BAPI, 50335_Wireless_BLE_Receiver_AOM, BA-RCV-BLE-EZ-BAPI Wireless Receiver kunye neAnalog Output Modules, BA-RCV-BLE-EZ-BAPI, Wireless Receiver kunye ne-Analog Output Modules, iModyuli yeSiphumo seAnalog, iModyuli yokuPhuma yeAnalog Iimodyuli zeziphumo, iimodyuli

Iimbekiselo

• Incwadi yokusebenzisa