BA-RCV-BLE-EZ-BAPI Wireless Receiver ndi Analogi Output Modules

Zambiri Zamalonda

Zofotokozera

• Zogulitsa: Wolandila Opanda zingwe ndi Ma module a Analogi
• Nambala ya Chitsanzo: 50335_Wireless_BLE_Receiver_AOM
• Kugwirizana: Imagwira mpaka masensa 32 ndi ma module 127 osiyanasiyana

Zathaview
Wireless Receiver kuchokera ku BAPI imalandira zizindikiro kuchokera ku masensa opanda zingwe ndikutumiza deta ku Analog Output Modules kudzera pa basi ya RS485 yamawaya anayi. Ma modules amasintha chizindikiro kukhala kukana kwa analogi, voltage, kapena kulumikiza kwa wowongolera.

Setpoint Output Module (SOM)
SOM imatembenuza deta ya setpoint kuchokera ku sensa ya chipinda chopanda zingwe kukhala kukana kapena voltage. Imapereka mphamvu zisanu zamafakitaletage ndi mitundu yotsutsa yokhala ndi magwiridwe antchito osankha.

Relay Output Module (RYOM)
Ryom imatembenuza deta kuchokera kwa wolandila opanda zingwe kukhala chotseka cholimba cha boma kwa wolamulira wa DDC. Ikhoza kukhazikitsidwa ngati kamphindi kapena latching linanena bungwe relay.

Malangizo Ogwiritsira Ntchito Zogulitsa

Kuphatikizika kwa Sensor, Receiver, ndi Zotulutsa Zotulutsa

Kuyanjanitsa Sensor kwa Wolandira

1. Sankhani sensa kuti mugwirizane ndikugwiritsa ntchito mphamvu.
2. Ikani mphamvu kwa wolandira. Buluu la LED lidzawala.
3. Dinani ndikugwira Batani la Utumiki pa wolandila mpaka kuwala kwa buluu kuyambika. Kenako dinani batani la Utumiki .

FAQs

Ndi masensa angati omwe wolandila angatenge?
Wolandila amatha kukhala ndi masensa 32.

Wireless Receiver ndi Analogi Output Modules

Kuyika ndi Malangizo Ogwiritsira Ntchito

Zathaview ndi Identification

Wireless Receiver kuchokera ku BAPI imalandira chizindikiro kuchokera ku sensa imodzi kapena zingapo zopanda zingwe ndikupereka deta ku Analog Output Modules kudzera mu basi ya RS485 yamawaya anayi. Ma modules amasintha siginecha kukhala kukana kwa analogi, voltage kapena kulumikiza kwa wowongolera. Wolandila amatha kukhala ndi masensa 32 ndi ma module 127 osiyanasiyana.

RESISTANCE OUTPUT MODULE (ROM)
Imasintha kutentha kwa wolandila kukhala 10K-2, 10K-3, 10K-3(11K) kapena 20K thermistor curve. Gawo la 10K-2 lili ndi zotulutsa za 35 mpaka 120ºF (1 mpaka 50ºC). Gawo la 10K-3 lili ndi zotulutsa za 32 mpaka 120ºF (0 mpaka 50ºC). Gawo la 10K-3(11K) lili ndi zotulutsa za 32 mpaka 120ºF (0 mpaka 50ºC). Gawo la 20K lili ndi zotulutsa za 53 mpaka 120ºF (12 mpaka 50ºC). Kutulutsa kwapadera kumawonetsedwa pazolemba zamalonda.

VOLTAGE OUTPUT MODULE (VOM)
Amasintha kutentha kapena chinyezi kuchokera kwa wolandila kukhala mzere wa 0 mpaka 5 kapena 0 mpaka 10 VDC chizindikiro. Gawoli lili ndi kutentha kwa fakitale eyiti, ndipo mawonekedwe ake amasonyezedwa pa chizindikiro cha mankhwala. Mitundu yake ndi: 50 mpaka 90ºF (10 mpaka 32°C), 55 mpaka 85°F (13°F
mpaka 30 ° C), 60 mpaka 80 ° F (15 mpaka 27 ° C), 65 mpaka 80 ° F (18 mpaka 27 ° C), 45 mpaka 96 ° F (7 mpaka 35 ° C), -20 mpaka 120 ° C F (-29 mpaka 49°C), 32 mpaka 185°F (0 mpaka 85°C) ndi -40 mpaka 140°F (-40 mpaka 60 ° C).
Mutuwu uli ndi mitundu iwiri ya chinyezi ya 0 mpaka 100% kapena 35 mpaka 70% RH ndipo mtundu wake umawonetsedwa palemba.

SETPOINT OUTPUT MODULE (SOM)
Imasintha data ya setpoint kuchokera ku sensa yachipinda yopanda zingwe kukhala chokana kapena voltage. Pali zisanu fakitale seti voltage ndi milingo yokana, iliyonse ili ndi ntchito yosiyanitsira. VoltagE ranges ndi 0 kuti 5V, 3.7 kuti 0.85V, 4.2 kuti 1.2V, 0 kuti 10V ndi 2 kuti 10V. Mitundu yolimbana ndi 0 mpaka 10KΩ, 0 mpaka 20KΩ, 4.75K mpaka 24.75KΩ, 6.19K mpaka 26.19KΩ, 7.87K mpaka 27.87KΩ. Mitundu yeniyeni ikuwonetsedwa pa chizindikiro cha mankhwala.

RELAY OUTPUT MODULE (RYOM)
Imasintha data kuchokera pa cholandirira opanda zingwe kukhala chotseka cholimba chowongolera cha DDC. RYOM ndi kasitomala wokonzedwa kwakanthawi kapena kolowera. Itha kuphunzitsidwa ku masensa opanda zingwe a BLE monga kupitilira pa sensa ya chipinda cha BAPI-Stat "Quantum", chosinthira khomo la maginito pa BAPI-Stat "Quantum Slim" kapena kutulutsa kwa chowunikira chamadzi.

Kulumikizana kwa Sensor, Receiver ndi Analogi Output Modules

Kuyikako kumafuna kuti sensa iliyonse yopanda zingwe iphatikizidwe ndi wolandila yemwe amalumikizana nayo kenako ndi gawo lake lotulutsa kapena ma module. Njira yophatikizira ndiyosavuta pa benchi yoyesera yokhala ndi sensa, wolandila ndi ma module otulutsa mkati mwa mikono yofikirana wina ndi mnzake. Onetsetsani kuti muyike chizindikiro chapadera pa sensa ndi gawo lake lotulutsa kapena ma modules atatha kugwirizanitsa kuti adziwike pamalo ogwirira ntchito. Ngati kusintha kopitilira kumodzi kumapatsirana ndi sensa (kutentha, chinyezi ndi malo mwachitsanzo), kusinthika kulikonse kumafunikira gawo lina lotulutsa. Ma module angapo otulutsa amatha kuphatikizidwa ndikusintha komweko ngati mukufuna.

KULUMBIKITSA SENSOR KWA WOLANDIRA
Muyenera kuphatikizira sensor kwa wolandila musanaphatikize sensor ku gawo lotulutsa la analogi.

1. Sankhani sensor yomwe mukufuna kuyiphatikiza ndi wolandila. Ikani mphamvu ku sensa. Onani buku lake kuti mudziwe zambiri.
2.  Ikani mphamvu kwa wolandira. LED ya buluu pa wolandila idzawala ndikukhalabe yowala.
3. Dinani ndikugwira "Batani la Utumiki" pamwamba pa wolandila mpaka LED ya buluu itayamba kuwunikira, Mkuyu 1: Mabatani a Utumiki wa Wolandila ndi Ma modules Otulutsa ndiye dinani ndikumasula "Butani la Utumiki" pa sensa (Figs 2 & 3) zomwe mukufuna kuziphatikiza ndi wolandila. Pamene LED pa wolandirayo ibwerera ku "On" yolimba ndipo "Service LED" yobiriwira pa bolodi la sensor circuit ikuwombera mofulumira katatu, kugwirizanitsa kwatha. Bwerezani izi kwa masensa onse.

KULUMBIKITSA ZOPHUNZITSA MODULE KU SENSOR
Sensa ikalumikizidwa ndi wolandila, mutha kuphatikizira ma module otulutsa ndikusintha kwa sensor.

1. Sankhani gawo lotulutsa la sensor yomwe mukufuna ndikusintha ndikuyilumikiza ku cholandila opanda zingwe (Mkuyu 1).
2. Dinani ndikugwira "Batani la Utumiki" pamwamba pa gawo lotulutsa mpaka kuwala kwa buluu kukuyamba kuwunikira (pafupifupi masekondi atatu). Kenako, tumizani "chizindikiro chopatsirana" ku gawo lotulutsa ndikusindikiza ndi kutulutsa "Batani la Utumiki" pa sensa yopanda zingwe. LED ya buluu pa wolandila idzawala kamodzi kusonyeza kuti kutumizidwa kunalandiridwa; ndiye LED ya buluu pa gawo lotulutsa lidzakhala lolimba kwa pafupifupi 3 sensa ndi gawo lotulutsa tsopano likuphatikizidwa kwa wina ndi mzake ndipo lidzalumikizana wina ndi mzake kudzera m'malo mwa batri kapena ngati mphamvu imachotsedwa ku mayunitsi amagetsi. LED yotulutsa module ya buluu tsopano iwunikira kamodzi ikalandira kutumiza kuchokera ku sensa.

Zindikirani: Masensa opanda zingwe nthawi zambiri amayesa ndi kutumiza zinthu zosiyanasiyana, monga kutentha ndi chinyezi, kapena kutentha, chinyezi ndi malo. Zosintha zonsezi zimafalitsidwa pamene "Batani la Utumiki" la sensa likakanizidwa. Komabe, gawo lililonse la Analog Output Module limakonzedwa panthawi yadongosolo kuti likhale losinthika komanso losiyanasiyana kotero kuti limangophatikizana ndi zosinthazo osati zina.

Kuyika ndi Kuyika kwa Antenna

Mlongoti uli ndi maziko a maginito okwera. Ngakhale wolandirayo atha kukhala mkati mwa mpanda wachitsulo, mlongoti uyenera kukhala kunja kwa mpanda. Payenera kukhala mzere wopanda chitsulo wowonekera kuchokera ku masensa onse kupita ku mlongoti. Mzere wovomerezeka umaphatikizapo makoma opangidwa ndi matabwa, mapepala kapena pulasitala yokhala ndi lath yopanda chitsulo. Mayendedwe a mlongoti (yopingasa kapena ofukula) akhudzanso magwiridwe antchito ndipo amasiyanasiyana malinga ndi kagwiritsidwe ntchito.
Kuyika mlongoti pamwamba pazitsulo kumadula kulandila kuchokera kumbuyo. Mawindo oundana amathanso kutsekereza kulandila. Mzere wamatabwa kapena pulasitiki wopangidwa ndi denga umapanga phiri lalikulu. Mlongoti ukhoza kupachikidwa padenga lililonse pogwiritsa ntchito ulusi kapena pulasitiki. Osagwiritsa ntchito waya popachika, ndipo musagwiritse ntchito zomangira zitsulo za perforated, zomwe zimatchedwa tepi ya plumbers.

Kuyika kwa Wolandila ndi Ma module a Analogi

Ma module olandila ndi otulutsa amatha kukhala snaptrack, DIN Rail kapena pamwamba. Wolandira aliyense amatha kukhala ndi ma module a 127. Yambani ndi wolandila kumanzere kumanzere, kenaka sungani motetezeka gawo lililonse kumanja.
Kanikizani ma tabo okwera abuluu kuti mukweze mu 2.75 ”snaptrack (mkuyu 4). Kankhani ma tabu okwera a DIN Rail (Mkuyu 5). Gwirani mbedza ya EZ m'mphepete mwa njanji ya DIN (mkuyu 6) ndikuzungulira m'malo mwake. Kankhirani ma tabu okwera kuti muyike pamwamba pogwiritsa ntchito zomangira zinayi zomwe zaperekedwa, chimodzi pa tabu iliyonse (Mkuyu 7).
Ngati ma module anu otulutsa sangakwane pamzere umodzi wowongoka chifukwa cha malo ochepa, ndiye yonjezerani chingwe chachiwiri cha ma module pamwamba kapena pansi. Lumikizani mawaya kuchokera kumanja kwa mzere woyamba wa ma module kupita kumanzere kwa chingwe chachiwiri cha ma module.
Kukonzekera kumeneku kumafuna Kits chimodzi kapena zingapo Zolumikizira Cholumikizira Chotsekera (BA/AOM-CONN) kuti muyimitse mawaya kumanzere ndi kumanja kwa Ma module a Analog Output.
Chida chilichonse chimakhala ndi seti imodzi ya zolumikizira 4.

Kuthetsa

Ma Wireless Receiver ndi ma Analogi Output Modules amatha pluggable ndipo amatha kulumikizidwa mu chingwe cholumikizidwa monga momwe zasonyezedwera kumanja. Mphamvu ya ma module otulutsa analogi imaperekedwa ndi wolandila pamasinthidwe awa. Ngati ma module amayendetsedwa mosiyana osati kuchokera kwa wolandila (monga momwe tawonetsera pansipa), ndiye kuti ayenera kukhala ndi 15 mpaka 40 VDC yokha. Onetsetsani kuti mwapereka mphamvu zokwanira pazida zonse za m'basi.

Kukulitsa Netiweki ya RS485 pakati pa Wolandila ndi Ma module a Analogi

Ma module a Analog Output atha kukwezedwa mpaka 4,000 mapazi kutali ndi wolandila. Utali wonse wa zingwe zonse zotchinga, zopindika zomwe zasonyezedwa pa chithunzi 10
ndi 4,000 mapazi (1,220 metres). Lumikizani materminal monga momwe zikuwonetsedwera mkuyu.tage converter (monga BAPI's VC350A EZ) ya gulu la Analogi Output Modules. Zindikirani: Kusintha kwa mkuyu 10 kumafuna Kits imodzi kapena zingapo Zotsekera Zotsekera monga tawonera patsamba lapitalo.

Zokonda Kusintha kwa Receiver

Zokonda zonse za sensor zimayendetsedwa ndikusinthidwa ndi wolandila kuti zigwirizane ndi zosowa za kukhazikitsa. Izi zimasinthidwa kudzera pa ma switch a DIP pamwamba pa wolandila. Awa ndi makonzedwe a ONSE OF SENSOR omwe amaphatikizidwa ndi wolandila.

Sample Rate / Interval - Nthawi yomwe sensor imadzuka ndikuwerenga. Zomwe zilipo 30 sec, 1 min, 3 min kapena 5 min.
Transmit Rate / Interval - Nthawi pakati pomwe sensa imatumiza zowerengera kwa wolandila. Zomwe zilipo ndi 1, 5, 10 kapena 30 mphindi.
Kutentha kwa Delta - Kusintha kwa kutentha pakati pa asample ndi kutumiza komaliza komwe kumapangitsa kuti sensa ipitirire nthawi yotumizira ndikutumiza kutentha kosinthika. Zomwe zilipo ndi 1 kapena 3 °F kapena °C.
Chinyezi cha Delta - Kusintha kwa chinyezi pakati pa asample ndi kutumiza komaliza komwe kumapangitsa kuti sensa ipitirire nthawi yotumizira ndikutumiza chinyezi chosinthika. Zomwe zilipo ndi 3 kapena 5 %RH.

Kukhazikitsanso Sensor, Receiver kapena Analogi Output Module

Masensa, olandila ndi ma module otulutsa amakhalabe olumikizana wina ndi mnzake pamene mphamvu imasokonekera kapena mabatire amachotsedwa. Kuti athetse mgwirizano pakati pawo, mayunitsi ayenera kukonzanso monga momwe tafotokozera pansipa:

• KUSINTHA ZOKHUDZA:
  Dinani ndikugwira "Batani la Utumiki" pa sensa kwa masekondi pafupifupi 30. Mkati mwa masekondi 30 amenewo, kuwala kwa LED kobiriwira kumakhala kozimitsa kwa masekondi pafupifupi 5, kenako kuwunikira pang'onopang'ono, kenako kumayamba kuwunikira mwachangu. Kung'anima kofulumira kukayima, kukonzanso kwatha. Sensor tsopano ikhoza kuphatikizidwa ndi wolandila watsopano. Kuti mulumikizanenso ndi wolandila yemweyo, muyenera kukhazikitsanso wolandila. Ma module otulutsa omwe adalumikizidwa kale ndi sensa safunikira kukonzanso.
• KUSINTHA NTCHITO YOPHUNZITSA:
  Dinani ndikugwira "Batani la Utumiki" pamwamba pa chipangizocho kwa masekondi pafupifupi 30. Pakati pa masekondi 30 amenewo, LED ya buluu idzazimitsidwa kwa masekondi atatu oyambirira ndikuwunikira nthawi yotsalayo. Kuwala kukayima, masulani "Batani la Utumiki" ndipo kukonzanso kwatha. Chipangizochi tsopano chikhoza kuphatikizidwanso ku kusintha kwa sensor.
• KUSINTHA NTCHITO YOLANDIRA:
  Dinani ndikugwira "Batani la Utumiki" pa sensa kwa masekondi pafupifupi 20. Mkati mwa masekondi 20 amenewo, kuwala kwa buluu kwa LED kumang'anima pang'onopang'ono, kenako kumayamba kung'anima mofulumira. Kung'anima kofulumira kukayima ndikubwerera ku buluu wolimba, kukonzanso kwatha. Chipangizochi tsopano chikhoza kuphatikizidwanso ndi masensa opanda zingwe. Chenjezo! Kukhazikitsanso wolandila kudzaphwanya mgwirizano pakati pa wolandila ndi masensa onse. Muyenera kukonzanso sensa iliyonse ndikukonzanso sensa iliyonse kwa wolandila.

Mkhalidwe Wofikira Pamene Kutumiza Kwawaya Kwasokonezedwa

Ngati gawo lotulutsa sililandira deta kuchokera ku sensa yomwe wapatsidwa kwa mphindi 35, LED ya buluu yomwe ili pamwamba pa module idzawombera mofulumira. Izi zikachitika, ma Analogi Output Modules amatha kuchita motere:

• Resistance Output Modules (BA/ROM) idzatulutsa kukana kwakukulu pamitundu yawo yotulutsa.
• Voltage Output Modules (BA/VOM) zosinthidwa kutentha zimayika zotulutsa zake kukhala 0 volts.
• Voltage Output Modules (BA/VOM) yosinthidwa kuti ikhale chinyezi ipangitsa kuti kutulutsa kwawo kukhale kokwera kwambiri.tage (5 kapena 10 volts).
• Ma Setpoint Output Modules (BA/SOM) adzakhala ndi mtengo wake womaliza mpaka kalekale.

Kupatsirana kukalandiridwa, ma module otulutsa amabwerera kuntchito yanthawi zonse mumasekondi a 60 kapena kuchepera.

Receiver Mafotokozedwe

• Mphamvu Yopangira: 15 mpaka 40 VDC kapena 12 mpaka 24 VAC (kuchokera kuphatikizidwe kokonzedwanso)
• Kugwiritsa Ntchito Mphamvu: 30mA @ 24 VDC, 2.75 VA @ 24 VAC
• Kuthekera/Chigawo: Kufikira masensa 32 ndi ma module 127 osiyanasiyana a Analog Output
• Mtunda Wolandirira:

Zimasiyanasiyana malinga ndi ntchito*

• pafupipafupi: 2.4 GHz (Bluetooth Low Energy)

Mtunda Wachingwe Wa Basi:

• 4,000 ft ndi chingwe chotchinga, chopindika

Malo Ogwiritsira Ntchito Environmental:

• Kutentha: 32 mpaka 140°F (0 mpaka 60°C)
• Chinyezi: 5 mpaka 95% RH yosasunthika
• Zida Zampanda & Mulingo: Pulasitiki ya ABS, UL94 V-0
• Agency: RoHS / FCC: T4FSM221104 / IC: 9067A-SM221104

Chipangizochi chikugwirizana ndi Gawo 15 la Malamulo a FCC. Kugwira ntchito kumadalira zinthu ziwiri izi:

1. Chipangizochi sichikhoza kuyambitsa kusokoneza kovulaza, ndi
2. Chipangizochi chiyenera kuvomereza kusokoneza kulikonse komwe kulandidwa, kuphatikizapo kusokoneza komwe kungayambitse ntchito yosayenera.

Zosintha zilizonse zomwe sizinavomerezedwe ndi [kampani] zitha kulepheretsa wogwiritsa ntchito kugwiritsa ntchito zidazo.
Chipangizochi chimagwirizana ndi mulingo wa RSS wopanda laisensi wa Industry Canada (IC). Opaleshoni imadalira zinthu ziwiri zotsatirazi. Chipangizochi sichikhoza kuyambitsa kusokoneza.
Chipangizochi chiyenera kuvomereza kusokonezedwa kulikonse, kuphatikizapo kusokoneza komwe kungayambitse ntchito yosayenera ya chipangizocho.

Zolemba za Analogi Output Module

ONSE MODULE

• Supply Power (VDC Only): 15 mpaka 40 VDC (kuchokera kuphatikizidwe kokonzedwanso)

Malo Ogwiritsira Ntchito Environmental:

• Kutentha: 32°F mpaka 140°F (0°C mpaka 60°C)
• Chinyezi: 5% mpaka 95% RH yosasunthika

Mtunda Wachingwe Wa Basi:

• 4,000 ft (1,220m) w/ chingwe chotchinga, chopindika
• Zida Zampanda & Mulingo: Pulasitiki ya ABS, UL94 V-0
• Agency: RoHS

SETPOINT OUTPUT MODULE (SOM)

Kugwiritsa Ntchito Mphamvu:

• Mitundu Yotsutsa: 20 mA @ 24 VDC
• Voltage Zitsanzo: 25 mA @ 24 VDC
• Zotulutsa Pano: 2.5 mA @ 4KΩ katundu

Nthawi Yatha Yolumikizana:

• 35 min. (Fast Flash) : Ibwerera ku lamulo lake lomaliza
• Kukondera kwa Analogi Voltage:
• 10 VDC max (Zitsanzo Zotsutsa Zokhazokha)

Zotuluka:

• Kukaniza Kutulutsa: 100Ω
• Voltage Kutulutsa: 150µV

• VOLTAGE OUTPUT MODULE (VOM)
  Kugwiritsa Ntchito Mphamvu: 25 mA @ 24 VDC
  Zotulutsa Pano: 2.5 mA @ 4KΩ katundu
• Nthawi Yatha Yolumikizana:
  35 min. (Fast Flash)
  Kutentha kumabwerera ku 0 volts
  Kutulutsa kwa % RH kumabwereranso ku sikelo yayikulu (5V kapena 10V)
• Kutulutsa Voltage manambala:
  0 mpaka 5 kapena 0 mpaka 10 VDC (factory calibrated)
  Kusintha kwamphamvu: 150µV
• RESISTANCE OUTPUT MODULE (ROM)
• Kugwiritsa Ntchito Mphamvu:
  20 mA @ 24 VDC
  Kukondera kwa Analogi Voltage: 10 VDC max
• Nthawi Yatha Yolumikizana:
  35 min. (Fast Flash)
  Kubwerera ku Kukaniza Kwambiri >35KΩ (Low Temp)
  Kutulutsa kwa Kutentha:
  10K-2 Unit: 35 mpaka 120ºF (1 mpaka 50ºC)
  10K-3 Unit: 32 mpaka 120ºF (0 mpaka 50ºC)
  10K-3(11K) Unit: 32 mpaka 120ºF (0 mpaka 50ºC) 20K Unit: 53 mpaka 120ºF (12 mpaka 50ºC)
  Kutulutsa Kutulutsa: 100Ω
• RELAY OUTPUT MODULE (RYOM)
• Kugwiritsa Ntchito Mphamvu:
  20 mA @ 24 VDC
  Kukondera kwa Analogi Voltage:
  Mtengo wa 10VDC
• Nthawi Yatha Yolumikizana:
  Mphindi 35 (Fast Flash)
  Imabwerera ku lamulo lomaliza
  Kulandirana linanena bungwe:
  40V (DC kapena AC peak), 150 mA max.
  Off state leakage panopa 1 uA max.
  Pakukana kwa boma 15Ω max.
• Ntchito:
  Kamphindi: Kamphindi 5 kamphindi Kamphindi Latching: Latching actuation

Building Automation Products, Inc., 750 North Royal Avenue, Gays Mills, WI 54631 USA
Telefoni:+1-608-735-4800 • Fakisi+1-608-735-4804 • Imelo: sales@bapihvac.com • Web : www.bapihvac.com

Zolemba / Zothandizira

BAPI BA-RCV-BLE-EZ-BAPI Wireless Receiver ndi Analogi Output Modules [pdf] Kukhazikitsa Guide BA-RCV-BLE-EZ-BAPI, 50335_Wireless_BLE_Receiver_AOM, BA-RCV-BLE-EZ-BAPI Wireless Receiver ndi Analogi Output Modules, BA-RCV-BLE-EZ-BAPI, Wireless Receiver ndi Analogi Output Modules ndi Analogi Output Modules, , Zotulutsa za Analogi, Zotulutsa, Ma modules

Maumboni

• Buku Logwiritsa Ntchito