BA-RCV-BLE-EZ-BAPI ihe nnata ikuku na modul mmepụta Analog
Ozi ngwaahịa
Nkọwapụta
- Ngwaahịa: Nnata ikuku na ihe nrụpụta Analog
- Nọmba nlereanya: 50335_Wireless_BLE_Receiver_AOM
- Ndakọrịta: Na-arụ ọrụ ruo ihe mmetụta 32 yana modul 127 dị iche iche
gafereview
Onye na-anata ikuku ikuku sitere na BAPI na-enweta akara sitere na sensọ ikuku ma na-ebufe data na Modul mmepụta Analog site na ụgbọ ala waya anọ RS485. Modul ndị ahụ na-atụgharị mgbaàmà na nguzogide analọg, voltage, ma ọ bụ nyefee kọntaktị maka njikwa.
Modul mmepụta ihe ntọala (SOM)
SOM na-atụgharị data setpoint site na ihe mmetụta ime ụlọ ikuku ka ọ bụrụ nguzogide ma ọ bụ voltage. Ọ na-enye voltage na oke mgbochi nwere ọrụ mbugharị nhọrọ.
Modul Mpụta Mgbapụta (RYOM)
RYOM na-atụgharị data sitere na onye na-anata ikuku ka ọ bụrụ mmechi ngbanwe steeti siri ike maka njikwa DDC. Enwere ike ịhazi ya ka ọ bụrụ obere oge ma ọ bụ ihe nrịbama mmepụta.
Ntuziaka ojiji ngwaahịa
Njikọta nke sensọ, nnata, na modul mmepụta
Ijikọ ihe mmetụta na onye nnata
- Họrọ ihe mmetụta iji jikọta wee tinye ike na ya.
- Tinye ike na nnata. Igwe ọkụ na-acha anụnụ anụnụ ga-enwu.
- Pịa ma jide bọtịnụ ọrụ na nnata ruo mgbe LED na-acha anụnụ anụnụ malitere na-egbuke egbuke. Wee pịa bọtịnụ Ọrụ .
Ajụjụ
Kedu sensọ ole onye nnata nwere ike ịnabata?
Onye nnata nwere ike ịnabata ihe mmetụta 32.
Ihe nnabata ikuku na ihe nrụpụta Analog
Ntuziaka nwụnye na arụ ọrụ
gafereview na Identification
Onye na-anata ikuku ikuku sitere na BAPI na-enweta akara ngosi site na otu sensọ ikuku ma ọ bụ karịa wee na-ebunye data ahụ na Modul Mpụta Analog site na bọs nwere waya anọ RS485. Modul ndị ahụ na-atụgharị mgbama gaa na nguzogide analọg, voltage ma ọ bụ nyefee kọntaktị maka njikwa. Onye nnata nwere ike ịnabata ihe mmetụta 32 yana modul 127 dị iche iche.
MODULE Nguzogide Nguzogide (ROM)
Na-atụgharị data okpomọkụ sitere na onye nnata ka ọ bụrụ 10K-2, 10K-3, 10K-3(11K) ma ọ bụ 20K thermistor curve. Ngalaba 10K-2 nwere oke mmepụta nke 35 ruo 120ºF (1 ruo 50ºC). Ngalaba 10K-3 nwere oke mmepụta nke 32 ruo 120ºF (0 ruo 50ºC). Ngalaba 10K-3 (11K) nwere oke mmepụta nke 32 ruo 120ºF (0 ruo 50ºC). Ngalaba 20K nwere oke mmepụta nke 53 ruo 120ºF (12 ruo 50ºC). Egosiri nso nso a kapịrị ọnụ na akara ngwaahịa.
VOLTAGE Mpụta MODULE (VOM)
Na-atụgharị data okpomọkụ ma ọ bụ iru mmiri sitere na onye nnata ka ọ bụrụ akara akara 0 ruo 5 ma ọ bụ 0 ruo 10 VDC. Modul ahụ nwere ogo ụlọ nrụpụta asatọ setịpụrụ, yana egosipụtara nso nso a na akara ngwaahịa. Ogologo ndị a bụ: 50 ruo 90ºF (10 ruo 32°C), 55 ruo 85°F (13)
ruo 30°C), 60 ruo 80°F (15 ruo 27°C), 65 ruo 80°F (18 ruo 27°C), 45 ruo 96°F (7 ruo 35°C), -20 ruo 120° F (-29 ruo 49°C), 32 ruo 185°F (0 ruo 85°C) na -40 ruo 140°F (-40 ruo 60°C).
Modul ahụ nwere oke iru mmiri abụọ nke 0 ruo 100% ma ọ bụ 35 ruo 70% RH na nso nso a ka egosiri na labelụ.
MODULE NKE SETPOINT (SOM)
Na-atụgharị data setpoint site na ihe mmetụta ụlọ ikuku ka ọ bụrụ nguzogide ma ọ bụ voltage. Enwere ụlọ nrụpụta ise set voltage na oke mgbochi, nke ọ bụla nwere ọrụ mbugharị nhọrọ. Voltage ranges bụ 0 ka 5V, 3.7 ka 0.85V, 4.2 ka 1.2V, 0 ka 10V na 2 ka 10V. Oke mgbochi bụ 0 ruo 10KΩ, 0 ruo 20KΩ, 4.75K ruo 24.75KΩ, 6.19K ruo 26.19KΩ, 7.87K ruo 27.87KΩ. Egosiri nso nso a na akara ngwaahịa.
MODULE RELAY RELAY (RYOM)
Na-atụgharị data sitere na nnata ikuku ka ọ bụrụ mmechi ngbanwe steeti siri ike maka njikwa DDC. RYOM bụ onye ahịa ahaziri nwa oge ma ọ bụ ihe nfegharị ngwa ngwa. Enwere ike ịzụ ya ka ọ bụrụ ihe mmetụta ikuku BLE dị iche iche dị ka nkwụsị na ihe mmetụta ụlọ BAPI-Stat "Quantum", mgbanaka ọnụ ụzọ magnet na BAPI-Stat "Quantum Slim" ma ọ bụ mmepụta nke onye na-achọpụta mmiri mmiri. 
Njikọta nke ihe mmetụta sensọ, ihe nnata na ihe nrụpụta Analog
Usoro nrụnye na-achọ ka ejikọtara ihe mmetụta ikuku ọ bụla na nnata jikọtara ya na modul mmepụta ya ma ọ bụ modul. Usoro ijikọ kacha dị mfe na bench ule nwere ihe mmetụta, ihe nnata na modul mmepụta dị n'akụkụ aka nke ibe ha. Jide n'aka na ị ga-etinye akara njirimara pụrụ iche na ihe mmetụta na modul mmepụta ya ma ọ bụ modul mgbe ejikọtara ha na ibe ha ka e wee mata ha na saịtị ọrụ. Ọ bụrụ na ihe mmetụta na-ebufe ihe karịrị otu mgbanwe (okpomọkụ, iru mmiri na ebe ntọala dịka ọmụmaatụ), mgbanwe ọ bụla chọrọ modul mmepụta dị iche. Enwere ike ijikọ ọtụtụ modul mmepụta na otu mgbanwe ma ọ bụrụ na achọrọ ya. 
Ijikọ ihe mmetụta na onye nnata
Ị ga-ejikọta ihe mmetụta na onye nnata tupu ijikọ ihe mmetụta na modul mmepụta analọg.
- Họrọ ihe mmetụta nke ịchọrọ ijikọ na nnata. Tinye ike na ihe mmetụta. Lee akwụkwọ ntuziaka ya maka ntuziaka zuru ezu.
- Tinye ike na nnata. Igwe ọkụ na-acha anụnụ anụnụ dị na nnata ga-enwu ma nọgide na-enwu.
- Pịa ma jide "Bọtịnụ Ọrụ" n'elu nke nnata ruo mgbe LED na-acha anụnụ anụnụ malitere ịgba ọkụ, Fig. 1: Bọtịnụ ọrụ nnata na mmepụta modul wee pịa ma hapụ "bọtịnụ ọrụ" na ihe mmetụta (Fig 2 & 3) na ịchọrọ ijikọ na onye nnata. Mgbe LED na nnata na-alaghachi na "On" siri ike na akwụkwọ ndụ akwụkwọ ndụ "Service LED" na sensọ sekit sekit na-egbukepụ ngwa ngwa ugboro atọ, njikọ ahụ zuru ezu. Tinyegharịa usoro a maka sensọ niile.
Ijikọ modul mmepụta na sensọ
Ozugbo ejikọrọ ihe mmetụta na onye nnata, ị nwere ike ijikọ modul mmepụta na mgbanwe ihe mmetụta.
- Họrọ modul mmepụta maka mgbanwe ihe mmetụta achọrọ na nso ma jikọọ ya na onye na-anata ikuku (Fig 1).
- Pịa ma jide "Bọtịnụ ọrụ" n'elu modul mmepụta ruo mgbe LED na-acha anụnụ anụnụ malitere ịgba ọkụ (ihe dịka 3 sekọnd). Mgbe ahụ, ziga "ịgbama nnyefe njikọta" na modul mmepụta ahụ site na ịpị na ịtọhapụ "bọtịnụ ọrụ" na ihe mmetụta ikuku. Igwe ọkụ na-acha anụnụ anụnụ na onye nnata ga-agbanye ọkụ ozugbo na-egosi na a natara nnyefe; mgbe ahụ na-acha anụnụ anụnụ LED na mmepụta modul ga-aga siri ike n'ihi na banyere 2 sensọ na mmepụta modul na-now paired ọ bụla ọzọ na a ga-anọgide na-paired ka ibe site batrị nnọchi ma ọ bụ ma ọ bụrụ na ike na-ewepụ si waya ike nkeji. Igwe ọkụ na-acha anụnụ anụnụ nke mmepụta modul ga-enwu ugbu a otu ugboro mgbe ọ bụla ọ nwetara nnyefe site na ihe mmetụta.
Mara: Igwe ikuku sensọ na-atụkarị ma na-ebufe ọtụtụ mgbanwe dị ka okpomọkụ na iru mmiri, ma ọ bụ ọnọdụ okpomọkụ, iru mmiri na ebe ntọala. A na-ebufe mgbanwe ndị a niile mgbe ịpị bọtịnụ "Ọrụ" ihe mmetụta. Otú ọ dị, a na-ahazi Module mmepụta Analog ọ bụla n'oge a na-ahazi ya na mgbanwe dị iche iche na oke ya mere ọ ga-ejikọta ya na mgbanwe ahụ ọ bụghị ndị ọzọ.
Ịkwalite na ịchọta Antenna
Antenna nwere ntọala magnetik maka ịrịgo. Ọ bụ ezie na nnata nwere ike ịdị n'ime ihe mkpuchi ígwè, antenna ga-adị n'èzí ogige ahụ. A ga-enwerịrị ahịrị anya na-abụghị ọla sitere na sensọ niile ruo na antenna. Ahịrị a na-anabata nke ọma gụnyere mgbidi sitere na osisi, nkume mpempe akwụkwọ ma ọ bụ plasta nwere lath na-abụghị ọla. Ntughari nke antenna (n'ahịrị ma ọ bụ vetikal) ga-emetụtakwa arụmọrụ ma gbanwee site na ngwa.
Ịkwanye antenna n'elu igwe ga-ebipụ nnabata n'azụ elu. Window jụrụ oyi nwekwara ike igbochi nnabata. Eriri ajị anụ osisi ma ọ bụ rọba nke a na-etinye n'obere ụlọ na-eme nnukwu ugwu. Enwere ike kwụgide antenna n'elu ụlọ ọ bụla site na iji eriri ma ọ bụ eriri plastik. Ejila waya kwụgidere, ma ejikwala eriri igwe gbawara agbawa, nke a na-akpọkarị teepu plumbers.
Nkwalite nke nnabata na ihe nrụpụta Analog
Modul nnabata na mmepụta nwere ike ịbụ snaptrack, DIN Rail ma ọ bụ n'elu elu. Onye ọ bụla nnata nwere ike nabata ihe ruru 127 modul. Malite na nnata n'aka ekpe, wee tinye modul mmepụta ọ bụla n'aka nri.
Pịa na taabụ mgbago na-acha anụnụ anụnụ ka ọ gbagoro na 2.75" snaptrack (Fig 4). Wepụ taabụ mgbago maka DIN Rail (Fig 5). Jide nko mgbago EZ na nsọtụ ụgbọ okporo ígwè DIN (Fig 6) wee tụgharịa n'ime ebe. Wepụ taabụ mgbago maka elu elu site na iji skru anọ enyere, otu na taabụ ọ bụla (Fig 7).
Ọ bụrụ na modul mmepụta gị enweghị ike ịdaba n'otu ahịrị kwụ ọtọ n'ihi oke ohere, tinyezie eriri modulu nke abụọ n'elu ma ọ bụ n'okpuru. Jikọọ wires site n'akụkụ aka nri nke eriri mbụ nke modul n'akụkụ aka ekpe nke eriri modulu nke abụọ.
Nhazi a chọrọ otu ngwa ma ọ bụ karịa Pluggable Terminal Block Connector Kits (BA/AOM-CONN) maka nkwụsị waya agbakwunyere n'akụkụ aka ekpe na aka nri nke Modul mmepụta Analog.
Ngwa ọ bụla gụnyere otu njikọ njikọ anọ.
Nkwụsị
The Ikuku Nnata na Analog mmepụta Modules bụ pluggable na ike jikọọ na eriri agbakwunyere dị ka egosiri n'aka nri. A na-enye ike maka modul mmepụta analọg site na onye nnata na nhazi a. Ọ bụrụ na a na-akwado modul ahụ iche iche karịa site na nnata (dị ka egosiri n'okpuru), mgbe ahụ, ha ga-enwerịrị 15 ruo 40 VDC naanị. Jide n'aka na ị na-enye ike zuru oke maka ngwaọrụ niile dị na bọs.
Na-agbatị netwọkụ RS485 n'etiti onye nnata na modul mmepụta Analog
Enwere ike ịwụnye modul mmepụta Analog ruo 4,000 ụkwụ site na nnata. Ngụkọta ogologo nke eriri abụọ a kpuchiri ekpuchi, gbagọrọ agbagọ nke egosiri na Fig. 10
bụ 4,000 ụkwụ (1,220 mita). Jikọọ ọnụ ọnụ ọnụ dị ka e gosiri na Fig. 10. Ọ bụrụ na anya site na nnata na otu nke Analog Output Modules karịrị 100 ụkwụ (30 mita), nye a iche iche ike ọkọnọ ma ọ bụ vol.tage ntụgharị (dị ka BAPI's VC350A EZ) maka otu Modul mmepụta Analog ahụ. Mara: Nhazi dị na Fig 10 chọrọ otu ma ọ bụ karịa Pluggable Terminal Block Kits dị ka egosiri na ibe gara aga.
Ntọala mgbanwe nnata
A na-achịkwa ma gbanwee ntọala sensọ niile site na onye nnata ka ọ dabara na mkpa nke nrụnye. A na-edozi ihe ndị a site na ngbanwe DIP dị n'elu nke nnata. Ndị a bụ ntọala maka sensọ niile jikọtara na nnata ahụ.
Sample Ọnụọgụ/Oge etiti – Oge dị n'etiti mgbe ihe mmetụta na-eteta wee were gụọ. Ọnụ ahịa dị 30 sk, 1 min, 3 min ma ọ bụ 5 nkeji.
Nyefee ọnụego/Oge oge - Oge dị n'etiti mgbe ihe mmetụta na-ebufe ọgụgụ na onye nnata. Ụkpụrụ dị bụ 1, 5, 10 ma ọ bụ 30 nkeji.
Okpomọkụ Delta – Mgbanwe na okpomọkụ n'etiti dị kaample na nnyefe ikpeazụ nke ga-eme ka ihe mmetụta na-eme ka ọ kwụsịtụ oge nnyefe ma nyefee okpomọkụ gbanwere ozugbo. Ọnụ ahịa dị bụ 1 ma ọ bụ 3 Celsius ma ọ bụ Celsius C.
Delta iru mmiri – Mgbanwe na iru mmiri n'etiti dị kaample na mgbasa ozi ikpeazụ nke ga-eme ka ihe mmetụta na-agafe oge nnyefe ma nyefee iru mmiri gbanwere ozugbo. Ọnụ ahịa dị bụ 3 ma ọ bụ 5% RH.
Ịtọgharịa ihe mmetụta, nnata ma ọ bụ ihe nrụpụta Analog
Sensọ, nnata na modul mmepụta na-anọgide na-ejikọta ọnụ mgbe ike kwụsịrị ma ọ bụ wepụ batrị. Iji mebie njikọ dị n'etiti ha, ọ dị mkpa ka ịtọgharịa nkeji ahụ dịka akọwara n'okpuru:
- Itọgharịa ihe mmetụta:
Pịa ma jide "bọtịnụ ọrụ" na ihe mmetụta maka ihe dịka 30 sekọnd. N'ime sekọnd iri atọ ahụ, ọkụ ọkụ ndụ ndụ ga-agbanyụ ihe dị ka sekọn ise, wee jiri nwayọ na-enwu, wee malite na-egbuke egbuke ngwa ngwa. Mgbe nchapụta ngwa ngwa kwụsịrị, nrụpụta agwụla. Enwere ike ijikọ ihe mmetụta ugbu a na nnata ọhụrụ. Iji megharịa ụzọ na otu nnata, ị ga-emerịrị ịtọgharịa onye nnata. Modul mmepụta nke ejikọtara na mbụ na ihe mmetụta adịghị mkpa ka ejikọta ya ọzọ. - Iji tọgharịa modul mmepụta:
Pịa ma jide bọtịnụ "Ọrụ" n'elu unit maka ihe dịka 30 sekọnd. N'ime sekọnd iri atọ ahụ, LED na-acha anụnụ anụnụ ga-agbanyụ maka sekọnd atọ mbụ wee gbaa ọkụ maka oge fọdụrụnụ. Mgbe nchapụta ahụ kwụsịrị, hapụ “bọtịnụ ọrụ” ma nrụpụta agwụla. Enwere ike jikọta unit ahụ na mgbanwe ihe mmetụta. - Iji tọgharịa onye nnata:
Pịa ma jide "Bọtịnụ ọrụ" na ihe mmetụta maka ihe dịka 20 sekọnd. N'ime sekọnd iri abụọ ahụ, LED na-acha anụnụ anụnụ ga-eji nwayọọ nwayọọ na-egbukepụ egbukepụ, wee malite ịmị ọkụ ngwa ngwa. Mgbe nchapụta ngwa ngwa kwụsịrị wee laghachi na-acha anụnụ anụnụ, nrụpụta agwụla. Enwere ike ijikọ unit ahụ na sensọ ikuku. Kpachara anya! Ịtọgharịa onye nnata ga-agbaji njikọ dị n'etiti onye nata na ihe mmetụta niile. Ị ga-emegharị ihe mmetụta ọ bụla wee jikọta nke ọ bụla n'ime sensọ na onye nnata.
Ọnọdụ ndabara Mgbe akwụsịre izipu ikuku
Ọ bụrụ na modul mmepụta anaghị enweta data sitere na ihe mmetụta e kenyere ya maka nkeji 35, LED na-acha anụnụ anụnụ n'elu modul ahụ ga-ama jijiji ngwa ngwa. Ọ bụrụ na nke a emee, Modul mmepụta Analog ga-emeghachi omume dịka ndị a:
- Modules Mmepụta Nguzogide (BA/ROM) ga-emepụta nguzogide kachasị elu na nso nso a.
- Voltage Output Modules (BA/VOM) emebere maka okpomọkụ ga-edozi mmepụta ha na 0 volts.
- Voltage Output Modules (BA/VOM) emebere maka iru mmiri ga-edobe mmepụta ha na volta kacha elutage (5 ma ọ bụ 10 volts).
- Module nrụpụta Setpoint (BA/SOM) ga-ejide uru ikpeazụ ha ruo mgbe ebighị ebi.
Mgbe enwetara nnyefe, modul mmepụta ga-alaghachi n'ọrụ nkịtị na 60 sekọnd ma ọ bụ obere.
Nkọwa nke nnata
- Ike nnyefe: 15 ruo 40 VDC ma ọ bụ 12 ruo 24 VAC (site na ọkọnọ emezi ọkara ebili mmiri)
- Oriri ike: 30mA @ 24 VDC, 2.75 VA @ 24 VAC
- Ikike/Unit: Ihe ruru sensọ 32 na 127 dị iche iche Analog Output Modules
- Ogologo nnabata:
Ọ dị iche site na ngwa *
- Ugboro: 2.4 GHz (Bluetooth Low Energy)
Ogologo eriri ụgbọ ala:
- 4,000 ft nwere eriri mkpuchi, gbagọrọ agbagọ
Oke ọrụ gburugburu:
- Okpomọkụ: 32 ruo 140°F (0 ruo 60°C)
- Iru mmiri: 5 ruo 95% RH na-abụghị condensing
- Ihe mkpuchi & ogo: ABS Plastic, UL94 V-0
- Ụlọ ọrụ: RoHS / FCC: T4FSM221104 / IC: 9067A-SM221104
Ngwaọrụ a na-akwado akụkụ 15 nke Iwu FCC. A na-arụ ọrụ n'okpuru ọnọdụ abụọ a:
- Ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya na-emerụ ahụ, yana
- Ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla enwetara, gụnyere nnyonye anya nwere ike ibute ọrụ na-adịghị mma.
Mgbanwe ọ bụla ma ọ bụ mgbanwe ọ bụla [ụlọ ọrụ] kwadoro nke ọma nwere ike imebi ikike onye ọrụ iji rụọ ọrụ ahụ.
Ngwaọrụ a na-akwado ụlọ ọrụ Canada (IC) ọkọlọtọ RSS enweghị ikike. Arụ ọrụ bụ n'okpuru ọnọdụ abụọ ndị a. Ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya.
Ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla, gụnyere nnyonye anya nwere ike bute ịrụ ọrụ ngwaọrụ a na-achọghị.
Nkọwapụta Modul mmepụta Analog
MODULE niile
- Ike ikenye (naanị VDC): 15 ruo 40 VDC (sitere na ọkara ebili mmiri agbaziri)
Oke ọrụ gburugburu:
- Okpomọkụ: 32°F ruo 140°F (0°C ruo 60°C)
- Iru mmiri: 5% ruo 95% RH na-abụghị condensing
Ogologo eriri ụgbọ ala:
- 4,000 ft (1,220m) w/ mkpuchi, eriri abụọ gbagọrọ agbagọ
- Ihe mkpuchi & ogo: ABS Plastic, UL94 V-0
- Ụlọ ọrụ: RoHS
MODULE Mpụta SETPOINT (SOM)
Oriri ike:
- Ụdị nguzogide: 20 mA @ 24 VDC
- Voltage Ụdị: 25 mA @ 24 VDC
- Mmepụta ugbu a: 2.5mA @ 4KΩ ibu
Oge nkwukọrịta nke furu efu:
- 35 min. (Fast ngwa ngwa): Laghachi na iwu ikpeazụ ya
- Ntinye Ntinye Analog Voltage:
- 10 VDC max (naanị ụdị mmepụta ihe mgbochi)
Mkpebi mmepụta:
- Mmepụta nguzogide: 100Ω
- Voltage mmepụta: 150µV
- VOLTAGE Mpụta MODULE (VOM)
Oriri ike: 25 mA @ 24 VDC
Mmepụta ugbu a: 2.5mA @ 4KΩ ibu - Oge nkwukọrịta nke furu efu:
35 min. (Flash ngwa ngwa)
Mwepụta okpomọkụ na-alaghachi na 0 volts
Mmepụta % RH laghachiri n'ọkwa dị elu (5V ma ọ bụ 10V) - Mmepụta Voltage Oke:
0 ruo 5 ma ọ bụ 0 ruo 10 VDC (ụlọ ọrụ kwadoro)
Mkpebi mmepụta: 150µV - MODULE Nguzogide Nguzogide (ROM)
- Oriri ike:
20 MA @ 24 VDC
Ntinye Ntinye Analog Voltage: 10 VDC kacha elu - Oge nkwukọrịta nke furu efu:
35 min. (Flash ngwa ngwa)
Laghachi na nguzogide dị elu> 35KΩ (obere okpomọkụ)
Oke nwupụta okpomọkụ:
Nkeji 10K-2: 35 ruo 120ºF (1 ruo 50ºC)
Nkeji 10K-3: 32 ruo 120ºF (0 ruo 50ºC)
Nkeji 10K-3 (11K): 32 ruo 120ºF (0 ruo 50ºC) Nkeji 20K: 53 ruo 120ºF (12 ruo 50ºC)
Mkpebi mmepụta: 100Ω - MODULE RELAY RELAY (RYOM)
- Oriri ike:
20 MA @ 24 VDC
Ntinye Ntinye Analog Voltage:
VDC kacha elu 10 - Oge nkwukọrịta nke furu efu:
Nkeji 35 (Flash ngwa ngwa)
Laghachi na iwu ikpeazụ
Mpụta mbugharị:
40V (DC ma ọ bụ AC kacha elu), 150mA max.
Gbanyụọ ntapu steeti ugbu a 1 uA max.
Na nguzogide steeti 15Ω max. - Ọrụ:
Obere oge: 5 nkeji nkeji nkeji XNUMX Latching: Nkwụnye ngwa ngwa
Building Automation Products, Inc., 750 North Royal Avenue, Gays Mills, WI 54631 USA
Tel:+1-608-735-4800 • Faksị+1-608-735-4804 • ozi-e: sales@bapihvac.com • Web : www.bapihvac.com
Akwụkwọ / akụrụngwa
 |
BAPI BA-RCV-BLE-EZ-BAPI ihe nnata ikuku na modul mmepụta Analog [pdf] Ntuziaka nwụnye BA-RCV-BLE-EZ-BAPI, 50335_Wireless_BLE_Receiver_AOM, BA-RCV-BLE-EZ-BAPI Wireless Receiver and Analog Output Modules, BA-RCV-BLE-EZ-BAPI, Wireless Receiver and Analog Output Modules, Receiver and Modules , Modul mmepụta Analog, Modul mmepụta, modul |
