I-BA-RCV-BLE-EZ-BAPI Isamukeli Esingenantambo kanye namamojula okukhiphayo e-Analog

Ulwazi Lomkhiqizo

Imininingwane

• Umkhiqizo: Isamukeli Esingenantambo kanye namamojula okukhiphayo e-Analog
• Inombolo Yemodeli: 50335_Wireless_BLE_Receiver_AOM
• Ukuhambisana: Isebenza nezinzwa ezifika kwezingama-32 namamojula angu-127 ahlukene

Kuphelileview
I-Wireless Receiver evela ku-BAPI ithola amasiginali avela kuzinzwa ezingenantambo futhi idlulisela idatha kumamojula okukhiphayo e-Analog ngebhasi le-RS485 elinezintambo ezine. Amamojula aguqula isignali ibe ukumelana ne-analog, voltage, noma dlulisela othintana naye wesilawuli.

I-Setpoint Output Module (SOM)
I-SOM iguqula idatha ye-setpoint isuka kunzwa yegumbi elingenantambo ibe ukumelana noma ivolumutage. Inikeza amavolumu amahlanu asethwe emboninitagi-e kanye nobubanzi obuphikisayo obunomsebenzi ongazikhethela wokukhipha.

I-Relay Output Module (RYOM)
I-RYOM iguqula idatha kusuka kusamukeli okungenantambo ibe ukuvala kweswishi yesimo esiqinile yesilawuli se-DDC. Ingacushwa njenge-relay yesikhashana noma yokuxhuma.

Imiyalo yokusetshenziswa komkhiqizo

Ukumataniswa Kwenzwa, Isamukeli, namamojula Okukhiphayo

Ukumatanisa inzwa kumamukeli

1. Khetha inzwa ukuze ubhanqe futhi usebenzise amandla kuyo.
2. Faka amandla kumamukeli. I-LED eluhlaza okwesibhakabhaka izokhanya.
3. Cindezela futhi ubambe Inkinobho Yesevisi kumamukeli kuze kube yilapho i-LED eluhlaza okwesibhakabhaka iqala ukubaneka. Bese ucindezela Inkinobho Yesevisi.

Imibuzo Evame Ukubuzwa

Zingaki izinzwa ezingathathwa umamukeli?
Umamukeli angakwazi ukuthwala izinzwa ezingafika kwezingu-32.

I-Wireless Receiver kanye namamojula okukhiphayo e-Analog

Imiyalelo yokufaka nokusebenza

Kuphelileview kanye Nokuhlonza

I-Wireless Receiver evela ku-BAPI ithola isignali kusuka kuzinzwa ezingenantambo eyodwa noma ngaphezulu futhi inikezela ngedatha kumamojula okukhiphayo we-Analog ngebhasi le-RS485 elinezintambo ezine. Amamojula aguqula isignali ibe ukumelana ne-analog, voltage noma dlulisela othintana naye wesilawuli. Umamukeli angakwazi ukuhlalisa izinzwa ezifika kwezingama-32 namamojula angu-127 ahlukene.

IMODULE YOKUMELANA YOKUPHUMA (ROM)
Iguqula idatha yezinga lokushisa kusuka kumamukeli ibe yijika le-thermistor elingu-10K-2, 10K-3, 10K-3(11K) noma elingu-20K. Iyunithi ye-10K-2 inebanga lokuphumayo lika-35 ukuya ku-120ºF (1 kuya ku-50ºC). Iyunithi ye-10K-3 inebanga lokuphumayo lika-32 ukuya ku-120ºF (0 ukuya ku-50ºC). Iyunithi ye-10K-3(11K) inebanga lokuphumayo lika-32 ukuya ku-120ºF (0 ukuya ku-50ºC). Iyunithi ye-20K inebanga lokuphumayo lika-53 ukuya ku-120ºF (12 kuya ku-50ºC). Ububanzi obuthile bokukhiphayo buboniswa kulebula yomkhiqizo.

I-VOLTAGI-MODULE YOKUPHUMA (VOM)
Iguqula izinga lokushisa noma idatha yomswakamo isuka kumamukeli iye kumugqa ongu-0 kuye ku-5 noma u-0 kuye ku-10 isignali ye-VDC. Imojuli inebanga lokushisa eliyisishiyagalombili lesethi yefekthri, futhi ububanzi obuthile buboniswa kulebula yomkhiqizo. Ububanzi yilawa: 50 kuya ku-90ºF (10 kuya ku-32°C), 55 kuya ku-85°F (13
kuya ku-30 ​​° C), 60 kuya ku-80 ° F (15 kuya ku-27 ° C), 65 kuya ku-80 ° C), 18 kuya ku-27 ° C), 45 kuye ku-96 ° C) no-7 (-35 kuya ku-20 ° C).
Imojuli inezigaba ezimbili zokuswakama zika-0 kuye ku-100% noma 35 kuya ku-70% RH futhi ububanzi obuthile buboniswa kulebula.

I-SETPOINT OUTPUT MODULE (SOM)
Iguqula idatha ye-setpoint isuka kusizwa yegumbi elingenantambo ibe ukumelana noma ivolumutage. Kunezinhlobo ezinhlanu zefekthri set voltagu-e nobubanzi obuphikisayo, ngalinye linomsebenzi wokuzithandela wokukhipha. UmqulutagUbubanzi be-e bungu-0 kuye ku-5V, 3.7 kuye ku-0.85V, 4.2 kuye ku-1.2V, 0 kuye ku-10V no-2 kuye ku-10V. Ububanzi obuphikisayo bungu-0 kuye ku-10KΩ, 0 ukuya ku-20KΩ, 4.75K ukuya ku-24.75KΩ, 6.19K kuya ku-26.19KΩ, 7.87K kuya ku-27.87KΩ. Ibanga elithile liboniswa kulebula yomkhiqizo.

I-RELAY OUTPUT MODULE (RYOM)
Iguqula idatha esuka kusamukeli okungenantambo ibe ukuvala kweswishi yesimo esiqinile yesilawuli se-DDC. I-RYOM iwukudluliselwa okuphumayo okulungiselelwe ikhasimende okulungiselelwe okwesikhashana noma okuxhunywayo. Ingaqeqeshelwa izinzwa ezihlukahlukene ezingenantambo ze-BLE ezifana nokubhala ngaphezulu kwenzwa yegumbi le-BAPI-Stat “Quantum”, inkinobho yezicabha kazibuthe ku-BAPI-Stat “Quantum Slim” noma okukhiphayo komtshina wokuvuza kwamanzi.

Ukumataniswa Kwenzwa, Isamukeli kanye namamojula okukhiphayo e-Analogi

Inqubo yokufaka idinga ukuthi inzwa ngayinye engenantambo imataniswe nesamukeli esihlotshaniswa nayo bese kuba imojula yayo yokuphumayo ehambisanayo noma amamojula. Inqubo yokumatanisa ilula kakhulu ebhentshini lokuhlola elinenzwa, umamukeli namamojula okukhiphayo endaweni lapho ingalo ingafinyelelwa khona. Qiniseka ukuthi ubeka uphawu lokuhlonza oluhlukile kunzwa kanye nemojula ehlobene nayo yokukhiphayo noma amamojula ngemva kokuba ebhangqwe elinye nelinye ukuze abonakale endaweni yomsebenzi. Uma okuguquguqukayo okungaphezu kokukodwa kudluliselwa inzwa (izinga lokushisa, umswakama kanye nendawo yokubeka isibonelo), okuguquguqukayo ngakunye kudinga imojuli ehlukile yokukhiphayo. Amamojula amaningi okukhiphayo angabhangqwa kokuguquguquka okufanayo uma efunwa.

Ukumatanisa Inzwa Kumamukeli
Kufanele ubhanqe inzwa kumamukeli ngaphambi kokumatanisa inzwa nemojuli yokuphuma kwe-analog.

1. Khetha inzwa ofisa ukuyibhanqa nesamukeli. Faka amandla kunzwa. Bheka imanuwali yayo ukuze uthole imiyalelo enemininingwane.
2.  Faka amandla kumamukeli. I-LED eluhlaza okwesibhakabhaka kumamukeli izokhanya futhi ihlale ikhanyisiwe.
3. Cindezela futhi ubambe “Inkinobho Yesevisi” ngaphezulu kwesamukeli kuze kube yilapho i-LED eluhlaza okwesibhakabhaka iqala ukukhanya, Umdwebo 1: Izinkinobho Zesevisi Yemamojula Okukhiphayo bese ucindezela futhi ukhulule “Inkinobho Yesevisi” kunzwa (Amakhiwane 2 & 3) ofuna ukuwabhangqa nomamukeli. Lapho i-LED kowamukelayo ibuyela kokuthi “Kuvuliwe” futhi “i-Service LED” eluhlaza eluhlaza ebhodini lesekhethi yenzwa icwayiza ngokushesha izikhathi ezintathu, ukubhanqa kuqediwe. Phinda le nqubo kuzo zonke izinzwa.

Ukumatanisa IMODULE EPHUMAYO YInzwa
Uma inzwa isibhanqiwe kumamukeli, ungabhanqa amamojula okukhiphayo nokuguquguquka kwenzwa.

1. Khetha imojula yokuphumayo yoguquko lwenzwa oyifunayo bese uhlukanisa bese uyixhuma yisamukeli esingenantambo (Fig 1).
2. Cindezela futhi ubambe “Inkinobho Yesevisi” ngaphezulu kwemojuli yokukhipha kuze kube yilapho i-LED eluhlaza okwesibhakabhaka iqala ukukhanya (cishe imizuzwana emi-3). Bese, thumela "isignali yokudlulisa yokumatanisa" kuleyo mojula yokuphumayo ngokucindezela futhi ukhulule "Inkinobho Yesevisi" kunzwa engenantambo. I-LED eluhlaza okwesibhakabhaka kowamukelayo izokhanya kanye ikhombisa ukuthi ukudluliswa kwamukelwe; bese i-LED eluhlaza okwesibhakabhaka kumojuli yokukhipha izohamba iqine cishe ngenzwa engu-2 kanye nemojula yokuphumayo manje isibhangqwe enye nenye futhi izohlala ibhangqwe enye nenye ngokushintshwa kwebhethri noma uma amandla esuswa kumayunithi wamandla wezintambo. I-LED eluhlaza okwesibhakabhaka yemojuli okukhiphayo manje izokhanya kanye noma nini lapho ithola ukudluliselwa okuvela kunzwa.

Qaphela: Izinzwa ezingenantambo zivame ukulinganisa futhi zidlulise okuguquguqukayo okuningi, njengezinga lokushisa nomswakama, noma izinga lokushisa, umswakama nendawo yokubeka. Konke lokhu okuguquguqukayo kudluliselwa lapho "Inkinobho Yesevisi" yenzwa icindezelwa. Nokho, i-Analog Output Module ngayinye ihlelwa ngesikhathi sokuhleleka kokuguquguquka okuthile nobubanzi ngakho izomataniswa kuphela nalokho okuguquguqukayo hhayi okunye.

Ukukhweza kanye nokutholakala kwe-Antenna

I-antenna inesisekelo kazibuthe sokukhwezwa. Nakuba umamukeli angase abe ngaphakathi kwendawo ebiyelwe ngensimbi, uthi kufanele lube ngaphandle kwendawo ebiyelwe. Kufanele kube khona umugqa wokubuka ongewona owensimbi osuka kuzo zonke izinzwa uya othini. Umugqa wokubona owamukelekayo uhlanganisa izindonga ezenziwe ngokhuni, idwala leshidi noma ukhonkolo olunomshini ongewona owensimbi. Ukuma kwe-antenna (evundlile noma eqondile) izophinde ibe nomthelela ekusebenzeni futhi iyahlukahluka ngokuya ngohlelo lokusebenza.
Ukukhweza i-antenna endaweni yensimbi kuzonqamula ukwamukela ngemuva kwendawo. Amafasitela aneqhwa angase avimbe ukwamukela futhi. Umucu owenziwe ngokhuni noma wepulasitiki onamathiselwe ophahleni losilingi wenza ukukhweza okuhle. I-antenna ingase ilengiswe kunoma iyiphi indawo yophahla kusetshenziswa i-fiber noma i-plastic twine. Ungasebenzisi ucingo ukulenga, futhi ungasebenzisi ibhande lensimbi elinembobo, elivame ukubizwa ngokuthi i-plumber tape.

Ukukhweza Isamukeli kanye namamojula okukhiphayo e-Analogi

Amamojula owamukelayo kanye nokuphumayo angaba i-snaptrack, i-DIN Rail noma ifakwe phezulu. Umamukeli ngamunye angakwazi ukuhlalisa amamojula afika kwangu-127. Qala ngesamukeli kwesokunxele esikude, bese unamathisele ngokuphephile imojula ngayinye yokuphumayo kwesokudla.
Phusha kumathebhu wokukhweza aluhlaza ukuze ukhweze ngo-2.75” snaptrack (Fig 4). Phusha amathebhu wokukhweza we-DIN Rail (Fig 5). Bamba ihuku lokukhweza le-EZ onqenqemeni lukaloliwe we-DIN (Fig 6) bese uzungezisa endaweni. Phusha amathebhu okukhwezwayo ukuze afakwe ngaphezulu usebenzisa izikulufu ezine ezinikeziwe, esisodwa kuthebhu ngayinye (Fig 7).
Uma amamojula akho okukhiphayo engakwazi ukungena emugqeni owodwa oqondile ngenxa yesikhala esilinganiselwe, bese ukhweza uchungechunge lwesibili lwamamojula ngenhla noma ngezansi. Xhuma izintambo ukusuka kwesokudla sochungechunge lokuqala lwamamojula ukuya kwesokunxele sochungechunge lwesibili lwamamojula.
Lokhu kulungiselelwa kudinga Ikhithi Yesixhumi Esivimbayo Yesitheminali esisodwa noma ngaphezulu (BA/AOM-CONN) ukuze kunqanyulwe izintambo ezengeziwe kwesokunxele nakwesokudla se-Analog Output Module.
Ikhithi ngayinye ihlanganisa isethi eyodwa yezixhumi ezi-4.

Ukunqanyulwa

I-Wireless Receiver kanye ne-Analog Output Modules ayaxhumeka futhi angaxhunywa ngeyunithi yezinhlamvu enamathiselwe njengoba kuboniswe kwesokudla. Amandla amamojula we-analog okukhiphayo anikezwa umamukeli kulokhu kulungiselelwa. Uma amamojula enikwa amandla ngokwehlukana kunowamukeli (njengoba kukhonjisiwe ngezansi), kufanele abe ne-VDC eyi-15 kuya ku-40 kuphela. Qiniseka ukuthi unikeza amandla anele kuwo wonke amadivaysi ebhasi.

Ukunweba Inethiwekhi ye-RS485 phakathi kwe-Receiver namamojula okukhiphayo e-Analog

Amamojula Okukhiphayo we-Analog angase afakwe amafidi angaba ngu-4,000 ukusuka kumamukeli. Ubude obuphelele bazo zonke izintambo ezivikelekile, ezisontekile eziboniswe ku-Fig. 10
ingamamitha angu-4,000 (amamitha angu-1,220). Xhuma amatheminali ndawonye njengoba kukhonjisiwe ku-Fig. 10. Uma ibanga ukusuka kumamukeli ukuya eqenjini lamaMojula Okukhiphayo we-Analog likhulu kunezinyawo ezingu-100 (30 amamitha), nikeza amandla ahlukene noma ivolumu.tagi-e converter (njenge-BAPI's VC350A EZ) yalelo qembu lamamojula okukhiphayo e-Analog. Qaphela: Ukucushwa ku-Fig 10 kudinga Ikhithi Yesitheminali Exhumekeka eyodwa noma ngaphezulu njengoba kuboniswe ekhasini eledlule.

Izilungiselelo zokushintsha umamukeli

Zonke izilungiselelo zenzwa zilawulwa futhi zilungiswe umamukeli ukuze zivumelane nezidingo zokufakwa. Lokhu kulungiswa ngamaswishi e-DIP ngaphezulu komamukeli. Lezi izilungiselelo ZAZO ZONKE IZInzwa ezibhangqwe kulowo mamukeli.

Sample Rate/Isikhawu – Isikhathi phakathi kokuthi inzwa ivuka futhi ithatha ukufunda. Amanani atholakalayo 30 sec, 1 min, 3 min noma 5 min.
Isilinganiso Sokudlulisa/Isikhawu - Isikhathi esiphakathi kokuthi inzwa idlulisela ukufundwa kumamukeli. Amanani atholakalayo angu-1, 5, 10 noma 30 amaminithi.
I-Delta Temperature - Ukushintsha kwezinga lokushisa phakathi kwe-asampi-le kanye nokudlulisa kokugcina okuzokwenza ukuthi inzwa yeqe isikhawu sokudlulisa futhi ngokushesha idlulisele izinga lokushisa elishintshile. Amanani atholakalayo angu-1 noma 3 °F noma °C.
Ukuswakama kweDelta - Ukushintsha komswakama phakathi kwe-asampi-le kanye nokudlulisa kokugcina okuzokwenza ukuthi inzwa yeqe isikhawu sokudlulisa futhi ngokushesha idlulise ukuswakama okushintshile. Amanani atholakalayo angu-3 noma 5 %RH.

Ukusetha kabusha i-Sensor, Receiver noma i-Analog Output Module

Izinzwa, izemukeli namamojula okukhiphayo ahlala ebhanqiwe kwamanye lapho amandla ephazanyiswa noma amabhethri ekhishwa. Ukunqamula izibopho phakathi kwabo, amayunithi adinga ukusethwa kabusha njengoba kuchazwe ngezansi:

• UKUSETHA KABUSHA Inzwa:
  Cindezela bese ubamba “Inkinobho Yesevisi” kunzwa cishe imizuzwana engama-30. Phakathi naleyo mizuzwana engama-30, i-LED eluhlaza izocisha cishe imizuzwana emi-5, bese ikhanyisa kancane, bese iqala ukubaneka ngokushesha. Lapho ukukhanya okusheshayo kuma, ukusetha kabusha kuqedile. Inzwa manje ingabhangqwa nesamukeli esisha. Ukubhangqa kabusha kumamukeli ofanayo, kufanele usethe kabusha umamukeli. Amamojula okukhiphayo aye amataniswe ngaphambilini nenzwa awadingi ukuphinda amataniswe.
• UKUSETHA KABUSHA IMODULE YOKUPHUMA:
  Cindezela bese ubamba "Inkinobho Yesevisi" phezulu kweyunithi cishe imizuzwana engama-30. Kuleyo mizuzwana engu-30, i-LED eluhlaza okwesibhakabhaka izocisha imizuzwana emi-3 yokuqala bese ibaneka isikhathi esisele. Uma ukukhanya kuma, khulula "Inkinobho Yesevisi" futhi ukusetha kabusha kuqedile. Iyunithi manje ingabhangqwa kabusha kokuguquguquka kwenzwa.
• UKUSETHA KABUSHA Isamukeli:
  Cindezela bese ubamba “Inkinobho Yesevisi” kunzwa cishe imizuzwana engama-20. Kuleyo mizuzwana engu-20, i-LED eluhlaza okwesibhakabhaka izokhanyisa kancane, bese iqala ukukhanya ngokushesha. Uma ukukhanya okusheshayo kuma futhi kubuyela kokuluhlaza okwesibhakabhaka okuqinile, ukusetha kabusha kuqedile. Iyunithi manje ingabhangqwa kabusha kuzinzwa ezingenantambo. Isexwayiso! Ukusetha kabusha umamukeli kuzophula izibopho phakathi komamukeli nazo zonke izinzwa. Kuzodingeka usethe kabusha inzwa ngayinye bese uphinda ubhanqa kabusha inzwa ngayinye kumamukeli.

Isimo Esizenzakalelayo Lapho Ukudluliselwa Okungenantambo kuphazamisekile

Uma imojuli yokuphumayo ingatholi idatha kusuka kunzwa yayo eyabelwe imizuzu engu-35, i-LED eluhlaza okwesibhakabhaka phezulu kwemojuli izocwayiza ngokushesha. Uma lokhu kwenzeka, amamojula okukhiphayo e-Analog azosabela ngale ndlela elandelayo:

• Amamojula Okukhipha Ukumelana (i-BA/ROM) azokhipha ukumelana okuphezulu kakhulu ebangeni lokuphuma kwawo.
• VoltagI-e Amamojula Okukhipha (BA/VOM) alinganiselwe izinga lokushisa azosetha okukhiphayo kube ngu-0 volts.
• VoltagAma-e Output Modules (BA/VOM) abalwe ukuswakama azosetha okukhiphayo kuvolumu yawo ephezulu kakhulutage (5 noma 10 volts).
• I-Setpoint Output Modules (BA/SOM) izobamba inani lawo lokugcina unomphela.

Uma ukudluliswa kwamukelwe, amamojula okukhiphayo azobuyela ekusebenzeni okujwayelekile kumasekhondi angama-60 noma ngaphansi.

Imininingwane Yomamukeli

• Supply Power: 15 kuya ku-40 VDC noma 12 kuya ku-24 VAC (kusuka ekunikezeni okulungisiwe kwe-half wave)
• Ukusetshenziswa kwamandla: 30mA @ 24 VDC, 2.75 VA @ 24 VAC
• Amandla/Iyunithi: Kufikela kuzinzwa ezingama-32 kanye namamojula angu-127 ahlukene wokuphuma kwe-Analog
• Ibanga lokwamukela:

Iyahluka ngohlelo lokusebenza*

• Imvamisa: 2.4 GHz (Bluetooth Low Energy)

Ibanga lekhebula lebhasi:

• 4,000 ft enentambo evikelekile, ephothiweyo

Ibanga Lokusebenza Kwemvelo:

• Izinga lokushisa: 32 kuya ku-140°F (0 ukuya ku-60°C)
• Umswakamo: 5 ukuya ku-95% RH engafinyeleli
• I-Enclosure Material & Isilinganiso: ABS Plastic, UL94 V-0
• I-Ejensi: RoHS / FCC: T4FSM221104 / IC: 9067A-SM221104

Le divayisi ithobela Ingxenye 15 Yemithetho ye-FCC. Ukusebenza kungaphansi kwemibandela emibili elandelayo:

1. Le divayisi ingase ingabangeli ukuphazamiseka okuyingozi, futhi
2. Lolu cingo kufanele lwamukele noma yikuphi ukuphazamiseka okutholiwe, okuhlanganisa ukuphazamiseka okungase kubangele ukusebenza okungafuneki.

Noma yiziphi izinguquko noma ukuguqulwa okungagunyazwanga ngokucacile [yinkampani] kungase kuqede igunya lomsebenzisi lokusebenzisa okokusebenza.
Le divayisi ithobelana nezinga le-RSS elikhishwe yi-Industrial Canada (IC). Ukusebenza kungaphansi kwemibandela emibili elandelayo. Le divayisi ingase ingabangeli ukuphazamiseka.
Lolu cingo kufanele lwamukele noma yikuphi ukuphazamiseka, okuhlanganisa ukuphazamiseka okungase kubangele ukusebenza okungafunwa kocingo.

Ukucaciswa kwemojuli yokuphuma kwe-Analogi

WONKE AMAMODULI

• Supply Power (VDC Kuphela): 15 kuya ku-40 VDC (kusuka ekunikezeni okulungisiwe okuphakathi kwamagagasi)

Ibanga Lokusebenza Kwemvelo:

• Izinga lokushisa: 32°F ukuya ku-140°F (0°C ukuya ku-60°C)
• Umswakamo: 5% ukuya ku-95% RH ongafinyeleli

Ibanga lekhebula lebhasi:

• 4,000 ft (1,220m) w/ evikelekile, ikhebula elisontiwe
• I-Enclosure Material & Isilinganiso: ABS Plastic, UL94 V-0
• Isikhungo: RoHS

I-SETPOINT OUTPUT MODULE (SOM)

Ukusetshenziswa kwamandla:

• Amamodeli Okumelana: 20 mA @ 24 VDC
• Voltage Amamodeli: 25 mA @ 24 VDC
• Okukhiphayo Kwamanje: 2.5 mA @ 4KΩ umthwalo

Ukuphelelwa yisikhathi Ukuxhumana:

• 35 imiz. (I-Flash Esheshayo) : Ibuyela emyalweni wayo wokugcina
• I-Analog Input Bias Voltage:
• 10 VDC max (Amamodeli Wokuphikisa Okukhiphayo kuphela)

Ukulungiswa Kokuphumayo:

• Okukhiphayo Ukumelana: 100Ω
• Voltage Okukhiphayo: 150µV

• I-VOLTAGI-MODULE YOKUPHUMA (VOM)
  Ukusetshenziswa kwamandla: 25 mA @ 24 VDC
  Okukhiphayo Kwamanje: 2.5 mA @ 4KΩ umthwalo
• Ukuphelelwa yisikhathi Ukuxhumana:
  35 imiz. (I-Flash esheshayo)
  Izinga lokushisa eliphumayo libuyela ku-0 volts
  I-%RH ephumayo ibuyela esikalini esiphezulu (5V noma 10V)
• Okukhipha UmqtagIbanga:
  0 kuya ku-5 noma 0 kuye ku-10 VDC (ifekthri ilinganisiwe)
  Ukulungiswa Kokuphumayo: 150µV
• IMODULE YOKUMELANA YOKUPHUMA (ROM)
• Ukusetshenziswa kwamandla:
  20 mA @ 24 i-VDC
  I-Analog Input Bias Voltage: 10 VDC ubuningi
• Ukuphelelwa yisikhathi Ukuxhumana:
  35 imiz. (I-Flash esheshayo)
  Ibuyela Ekumelaneni Okuphezulu >35KΩ (Izinga Lesikhathi Esiphansi)
  Izinga Lokukhipha Izinga lokushisa:
  10K-2 Iyunithi: 35 ukuya ku-120ºF (1 ukuya ku-50ºC)
  10K-3 Iyunithi: 32 ukuya ku-120ºF (0 ukuya ku-50ºC)
  10K-3(11K) Iyunithi: 32 ukuya ku-120ºF (0 ukuya ku-50ºC) 20K Iyunithi: 53 ukuya ku-120ºF (12 ukuya ku-50ºC)
  Ukulungiswa Kokuphumayo: 100Ω
• I-RELAY OUTPUT MODULE (RYOM)
• Ukusetshenziswa kwamandla:
  20 mA @ 24 i-VDC
  I-Analog Input Bias Voltage:
  10 VDC ubuningi
• Ukuphelelwa yisikhathi Ukuxhumana:
  35 amaminithi (Fast Flash)
  Ibuyela kumyalo wokugcina
  Ukudluliswa kokukhipha:
  40V (DC noma i-AC peak), 150 mA max.
  Ukuvuza kwe-Off state kwamanje okungu-1 uA max.
  Ekumelaneni nesimo 15Ω ubuningi.
• Ukusebenza:
  Okwesikhashana: Ukuqalisa kwesikhashana kwesekhondi elingu-5 Ukulensa: Ukwenza kusebenze i-Latching

Building Automation Products, Inc., 750 North Royal Avenue, Gays Mills, WI 54631 USA
Ucingo:+1-608-735-4800 • Ifeksi+1-608-735-4804 • I-imeyili: sales@bapihvac.com • Web : www.bapihvac.com

Amadokhumenti / Izinsiza

I-BAPI BA-RCV-BLE-EZ-BAPI Isamukeli Esingenantambo kanye namamojula okukhiphayo we-Analog [pdf] Umhlahlandlela wokufaka BA-RCV-BLE-EZ-BAPI, 50335_Wireless_BLE_Receiver_AOM, BA-RCV-BLE-EZ-BAPI Wireless Receiver kanye ne-Analog Output Module, BA-RCV-BLE-EZ-BAPI, Wireless Receiver kanye ne-Analog Output Modules, I-Analog Output Module, I-Analog Output Module Amamojula Okukhiphayo, Amamojula

Izithenjwa

• Imaniwali yosebenzisayo