WUNDA Phase 4 Khokahano ea Mohloli oa Mocheso le Tlhophiso ea Taolo

LIEKETSENG

Mohato 4:

• Khokahano ea mohloli oa mocheso le ho seta taolo - Tataiso ea ho kengoa ea litsebi Pele u fetela mohatong oa 4, etsa bonnete ba hore mohato oa 3 o phethiloe ka botlalo.

Phase 4 Professional - Khokahano ea mohloli oa mocheso le ho seta taolo

• Etsa bonnete ba hore setsebi se tšoanelehang se etsa mehato e latelang. Ka kopo hlokomela hore mehato eohle e hlokahalang mekhahlelong e fetileng e phethiloe.

KEKETSO

MOHATO 1

• Lethathamo la pele ho Khokahano
• Pele o hokahanya manifold mohloling oa mocheso, etsa tlhahlobo ea khatello holim'a sistimi ea ho futhumatsa fatše, liphaephe le mefuta e mengata. Lokisa mehloli efe kapa efe ea tahlehelo ea khatello.

MOHATO 2

• Ho hokela manifold mohloling oa mocheso
• Mefuta-futa e 'ngoe le e 'ngoe e tlameha ho ba le lijo tse ikemetseng ho tsoa mohloling oa mocheso.
• Ho khothaletsoa hore ho hlophisoe s-plan/s-plan + kahoo sistimi ka 'ngoe e arolelanang mohloli oa mocheso e na le valve ea eona ea 2 port motorized. Ho lumella ho arohana ha mekhoa le e 'ngoe le e' ngoe ho ba le pitso ea eona ho mohloli oa mocheso.

Ho hokela ho li-valve tsa ho itšehla thajana ka mahlakoreng a mabeli a valve e kopanyang, sebelisa "1" tšepe e tona ho ea ho 15mm, 22mm, kapa 28mm compression fittting.

• 2–4 port manifolds: 15mm feeds
• Boema-kepe ba 4–8: 22mm phepelo
• Boema-kepe ba 8–12: 28mm phepelo

Netefatsa hore valve e kopanyang mefuta e mengata e koetsoe ka botlalo pele o kenya metsi a futhumetseng.

MOHATO 3

• Ho ntša moea o tsoang tsamaisong
• Ha manifold a hokahane le mohloli oa mocheso, 'me lijo li tlatsitsoe ho netefatsa hore lilopi tsa ho futhumatsa fatše li lula li le mong. Etsa bonnete ba hore li-flow meter le li-valve tsa ho khutla li koetsoe (li pota-potiloe ka ho feletseng ho ea ka nako).

Sena se tla etsa bonnete ba hore moea ofe kapa ofe o kentsoeng ho tsoa ho liphepelo ho ea ho mefuta e mengata o ka felloa ke moea ka ho sebelisa moea o kenang ka letsoho o sa lumelle moea ofe kapa ofe ho kena liluping tsa UFH.

MOHATO 4

• Ho eketsa inhibitor ho sistimi
• Hlakola sistimi e nang le inhibitor e loketseng joalo ka sistimi efe kapa efe ea ho futhumatsa e bohareng. Hlahisa inhibitor sebakeng leha e le sefe se loketseng sa ho tlatsa. Ho bala bophahamo ba metsi:
• Pipe ea 16mm: Kakaretso ea bolelele ba loop × 0.113 = lilithara
• Pipe ea 12mm: Kakaretso ea bolelele ba loop × 0.061 = lilithara
• Sebelisa bolelele ba loop ho tloha setšoantšong sa moralo oa liphaephe.

Bakeng sa tataiso ea HubSwitch ka kopo bona:
https://www.wundagroup.com/wp-content/uploads/2025/03/HubSwitch-manual_v2.pdf

MOHATO 5
Wiring le taolo

• Litaelo tse latelang ke tsa li-control tse bohlale tsa Wunda. Haeba u sebelisa litaolo tse tloaelehileng ho tsoa ho Wunda, ka kopo latela leqephe la lintlha tse amehang. Haeba u sebelisa litsamaiso tsa batho ba bang, ka kopo etsa bonnete ba hore u latela tataiso ea bona.

Mefuta e mengata ea sebaka se le seng se sebelisa li-control tse bohlale tsa Wunda

• Bakeng sa mefuta e mengata ea sebaka se le seng (lilou tsohle li sebetsa hammoho), li-actuator tsa elektroniki le lebokose la khokahano ha li hlokehe.
• Bula li-valve tsohle tsa ho khutlisa ka letsoho (anti-clockwise).

Sebelisa mocha oa HubSwitch (230V) ho qala:

• Tepo e sootho ea velofo ea libaka tse ngata Terata e phelang ea pompo e nang le mefuta e mengata
• Ho etsa likhokahano tse nepahetseng bakeng sa lipompo tse sa nke lehlakore le lefats'e. Lithapo tse ling kaofela tsa li-valve tsa libaka li ne li tla khutlela ho s-plan wiring lebokose le haufi le mohloli oa mocheso, bohlooho le lamunu li sebelisoa ho tsosa mohloli oa mocheso.
• HubSwitch e hloka ho hlophisoa ho mokhoa o nepahetseng oa mocha o sebelisa li-switches tsa dip le ho hokahanya ha jumper. Ka kopo latela litaelo tsa HubSwitch bakeng sa tlhophiso e nepahetseng ho latela hore na u e sebelisa ho qala eng.

Wiring & control bakeng sa mefuta e mengata ea libaka tse sebelisang li-control tse bohlale tsa Wunda

• Wiring ea lebokose la khokahanyo bakeng sa mefuta e mengata ea multizone. Li-actuator tsa elektronike li sebelisetsoa ho lumella liluu (li) ho phalla li sa tsamaisane ha libaka tse fapaneng li hloka mocheso. Tsena li kentsoe ka har'a lebokose la khokahanyo 'me li hlophisitsoe ka har'a app. Haeba u kenya li-multizone tse ngata tse ngata, lebokose la khokahanyo le tla hlokeha bakeng sa e 'ngoe le e 'ngoe, boholo ba mabokose a 4 a khokahanyo ka hub.
• Mounting Note: Se ke oa kenya lebokose la khokahano ka tlas'a manifold ho qoba tšenyo ea metsi.

Tlosa li-caps tsohle tsa li-valve 'me u kenye li-actuator tsa elektroniki sebakeng sa tsona. Boloka likatiba tsa matsoho bakeng sa tšebeliso ea nako e tlang kaha li na le thuso ha u ka tlatsa kapa ho hloekisa moea.
Litaelo tsa Wiring:

• Hokela lithapo tse phelang le tse sa nke lehlakore ho litheminale tse loketseng tsa L & N lebokoseng la khokahano. Ka tatellano, 1-12 (ho itšetlehile ka boholo bo bongata).
• Libaka li tla hlophisoa hamorao ts'ebelisong ha ho lokisoa likamore hore na ke li-actuator li hlahisoang ha kamore ka 'ngoe e hloka mocheso.
• Hokela pompo e nang le mefuta e mengata e phelang, e sa nke lehlakore le lefats'e ho li-terminals tse ngotsoeng lebokoseng la khokahanyo.

• Bosootho ba valve ea libaka bakeng sa mefuta e mengata ea ho futhumatsa fatše e lokela ho kena sebakeng se tloaelehileng se bulehileng (NO) lebokoseng la khokahanyo le nang le sehokelo se entsoeng pakeng tsa AC out 230V L ho COM.
• Ka boikhethelo: Sebelisa mocha oa 230V HubSwitch ho qala valve ea libaka tse ngata.
• Haeba ho baka mohloli oa mocheso ka kotloloho (eseng karolo ea s-plan) relay e ka sebelisoa, ebang ke volt mahala e se nang sehokelo kapa 230V e nang le sehokelo se entsoeng ho COM.
• HubSwitch e ka boela ea sebelisoa, e bua ka taelo ea eona ea ho lokisetsa mocha o le mong oa 230V kapa mokhoa oa mahala oa volt.

MOHATO 6

Ho hokahanya le ho hlophisoa ha sistimi ka app

• Ho etsa liteko pele ho ho hokahanya:
• Lebokose la khokahano:
• Ho etsa liteko tse hlahang lebokoseng la khokahanyo, tšoara konopo ea teko metsotsoana e 5 ho kenya mokhoa oa teko (Teko ea LED e tla benya boputsoa)
• Tlanya konopo ea teko ho potoloha liphetho ka ho le letona, ka actuator e 'ngoe le e 'ngoe LED e tla khantša ho bontša hore na ke tlhahiso efe e ntseng e lekoa.
• Tobetsa konopo ea teko ho potoloha ho ea ka letsohong le letšehali ho leka relay le pompo e mengata.
• Ha u se u netefalitse hore wiring e nepahetse ho tsoa ka mokhoa oa tlhahlobo ka ho tšoara konopo ea teko.

HubSwitch:

• Ho leka liphetho ho HubSwitch tšoara likonopo tsa 1 & 2 hammoho bakeng sa metsotsoana e 5,
• Ho tlanya boost 1 ho tla u lumella ho potoloha mocha ka mong mabone a LED ho bonts'a mocha o ntseng o lekoa (ho ipapisitse le hore na Hub e hlophisitsoe joang).
• Ho tlanya boost 2 ho tla etsa hore mocha o bule/o koale o bonts'e LED e tala ha e butse, kapa LED e khubelu ha e tima.
• Tšoara ka bobeli boost 1 & 2 ho tsoa mokhoeng oa tlhahlobo.

Mokhoa oa ho seta app:

• Ka kopo netefatsa hore router ea hau e phatlalatsa WiFi ea 2.4GHz. Ho ka 'na ha hlokahala hore ho nkoe mehato e meng ho netefatsa sena ho router kapa mofani oa marang-rang. Sena se hlokahala bakeng sa taolo efe kapa efe e bohlale.
• Khoasolla sesebelisoa sa WundaHome, theha ak'haonte, ebe u khetha:
• Kenya Sistimi> Kenya HubSwitch
• Latela litaelo tse ho sesebelisoa ho seta HubSwitch e e hokahanyang le Marang-rang le ho e hokahanya le ak'haonte ea hau (sena se ka fetisoa ho sebelisoa khoutu ea phetisetso kamora ho komisi).
• Kopanya mabokose a khokahano le sistimi ka ho latela litaelo tse ho app e fa e 'ngoe le e 'ngoe lebitso le nepahetseng haeba mabokose a mangata a li hokela a li bitsa ho latela mefuta e mengata eo e e laolang.
• Theha le ho bolela likamore ho app.
• Kopanya thermostat le kamore e 'ngoe le e 'ngoe, ho latela litaelo tse ho app.
• Eya ho Litlhophiso tsa Kamore> Li-parameter tse tsoetseng pele> Tlhophiso ea Lebokose la Khokahano:
• Totobatsa li-actuator tsa kamore eo. Le "Relay" haeba ho sebelisoa lebokose la khokahano ho tsosa valve ea libaka / mohloli oa mocheso.
• Haeba u sa sebelise lebokose la khokahanyo ho hlahisa valve ea libaka / mohloli oa mocheso khetha mocha o nepahetseng ho "HubSwitch channel configuration".
• Pheta sena ho hlophisa liphetho tse nepahetseng bakeng sa kamore ka 'ngoe.

MOHATO 7

• Ho qala tsamaiso ea pele le ho seta sekhahla sa phallo
• Ipehele ka bouena litefiso tsa phallo bakeng sa lupu ka 'ngoe. Beha valve ea ho kopanya bonyane ho qala, e bule ho fihlela mocheso o phahameng oa phallo, o bontšitsoeng ka tekanyo e phahameng ea mocheso.
• Bula limithara tsa phallo (le li-valve caps tsa manual haeba u na le mefuta e mengata ea libaka).
• Etela mocheso likamoreng tsohle tsa ho futhumatsa fatše ho app ka ho khetha mocheso o phahameng ho feta mocheso oa kamore ea hona joale.
• Nakong ea metsotso e 2-5, li-actuator li lokela ho qala, pompo e nang le mefuta e mengata le "trigger" ho ea mohloling oa mocheso.
• Litefiso tsa phallo li tla hloka ho lokisoa ho methara ea phallo.
• Beha litekanyetso tsa ho phalla ho latela tafole setšoantšong sa moralo oa liphaephe. Tsena li ka 'na tsa hloka litokiso tse nyane, haeba litekanyetso tsa phallo li behiloe ka nepo u lokela ho fumana phapang ea 7° lipakeng tsa phallo le litekanyo tsa mocheso tse khutlang. (5-10 ° e amoheleha).

• Ka potlako lebelo la ho phalla ka loop ho fokotseha ho tla fokotseha ho tla ba teng, litekanyetso tse liehang tsa phallo li fella ka phapang e phahameng.
• Haeba u sokola ho fihlela litekanyetso tse nepahetseng tsa phallo, hlahloba hore pompo e boemong bo nepahetseng bakeng sa ho futhumatsa fatše. Hape ho ka 'na ha e-ba le moea o ntseng o le ka har'a loops, pheta mokhoa oa ho tlatsa ho netefatsa hore ha ho na moea o bakang khanyetso ka har'a lupu e fokotsang lebelo la ho phalla.
• Litaelo tsena li etselitsoe ho sebelisoa le lits'ebetso tsa Wunda feela - ho li sebelisa le sistimi efe kapa efe ho ka baka mathata a tebileng a ts'ebetso, ho hloleha ha sistimi, kapa ho se sebetse ha tiisetso ea hau.

tiisetso

• Litaelo tsena li etselitsoe ho sebelisoa le lits'ebetso tsa Wunda feela - ho li sebelisa le sistimi efe kapa efe ho ka baka mathata a tebileng a ts'ebetso, ho hloleha ha sistimi, kapa ho se sebetse ha tiisetso ea hau.
• www.wundagroup.com 01291 634 149

Lipotso Tse Botsoang Hangata

P: A na nka sebelisa litaelo tsee ka litsamaiso tse ling ntle le Wunda?

A: Che, litaelo tsena li etselitsoe ho sebelisoa le litsamaiso tsa Wunda feela. Ho li sebelisa le sistimi efe kapa efe ho ka baka mathata a tebileng a ts'ebetso, ho hloleha ha sistimi, kapa ho se sebetse ha waranti ea hau.

Litokomane / Lisebelisoa

WUNDA Phase 4 Khokahano ea Mohloli oa Mocheso le Tlhophiso ea Taolo [pdf] Tlhophiso Tataiso Mokhahlelo oa 4 oa Khokahano ea Mohloli oa Mocheso le Tlhophiso ea Taolo, Khokahano ea Mohloli oa Mocheso le Tlhophiso ea Taolo, Khokahano le Tlhophiso ea Taolo.

Litšupiso

• Bukana ea Mosebelisi