Litaelo tsa ho Hloma
Mohlala oa SIM-16
Mojule oa Kenyeletso o Okametsoeng

LIEKETSENG

Mohlala oa SIM-16 Supervised Input Module ho tsoa ho Siemens Industry, Inc., ke mojule o fumanehang hole, o nang le sepheo se akaretsang. E fana ka li-circuits tse kenyang tse leshome le metso e tšeletseng bakeng sa ho shebella tsamaiso e hole. Kenyelletso e 'ngoe le e 'ngoe e ka hlophisoa ka bomong e le e hlokometsoeng (likhokahano tse omeletseng feela) kapa li sa hlokomeloe (kakaretso ea sepheo). SIM-16 e na le li-relay tse peli tsa Foromo ea C. Li-relay le li-input li ka hlophisoa ho sebelisoa Sesebelisoa sa Lenaneo sa Zeus.

TS'EBETSO

SIM-16 e kentsoe ka har'a sebaka se kampetsoeng se fumanehang hole le Main Panel. Puisano pakeng tsa SIM-16 le NIC-C (Network Interface Card) ke ka bese ea Control Area Network (CAN). Ho fihla ho 99 SIM-16s e ka sebelisoa ka NIC-C e le 'ngoe.
SIM-16 ka 'ngoe e na le li-switches tse peli tsa rotary tse 10 tse sebelisetsoang ho beha aterese ea boto ho CAN e leng aterese e nyenyane ea NIC-C.
Nako le nako ha phetoho ea boemo ba ho kenya e fumanoa, molaetsa o ikhethang oa CAN o romelloa ho NIC-C. Molaetsa oa CAN o tsoang ho NIC-C o lebisitsoeng ho SIM-16 o laola li-relay tsa Foromo ea C.

LIEKETSENG PELE

Liphetoho tsa Aterese ea Rotary - Beha aterese ea boto bakeng sa SIM-16 ka 'ngoe u sebelisa li-switches tsa rotary tse nang le maemo a leshome tse holim'a boto (Sheba setšoantšo sa 1). E 'ngoe le e' ngoe ea liaterese tsena e tlameha ho ba aterese e nyenyane ea NIC-C 'me e tšoane le liaterese tse fanoeng ho Sesebelisoa sa Lenaneo sa Zeus.

KEKETSO

SIM-16 e ka kenngoa ho REMBOX. Ha u sebelisa REMBOX 2 kapa 4, kenya SIM-16 sebakeng sa mojule o le mong ho REMBOX2-MP, P/N 500-634211 kapa REMBOX4-MP, P/N 500-634212 u sebelisa likurufu tse 'ne tse fanoeng. (Sheba Litaelo tsa Tlhophiso ea REMBOX2-MP/REMBOX4MP, P/N 315-034211.) Ho fihla ho 4 SIM-16s e tla kena ho REMBOX2; ho fihla ho 8 SIM-16s e tla lekana ho REMBOX4.

KHOPO
Tlosa matla ohle a sistimi pele o kenya, pele betri ebe AC. (Ho matlafatsa, hokela AC pele, ebe e ntan'o ba betri.)

• Module ka 'ngoe ea SIM-16 ke node ka beseng ea CAN.
• SIM-16 e ka kenngoa ka RNI kapa ntle le eona. Hokela bese ea CAN le 24V joalo ka ha ho bonts'itsoe ho Figure 2 le 3.
• Ho fihla ho li-module tsa CAN tse 99, ka motsoako ofe kapa ofe, li ka hokeloa ho bese ea CAN ea NIC-C ka 'ngoe.
• Module ka 'ngoe ea SIM-16 e romelloa ka thapo e le 'ngoe ea CCS.
• Mahokelo a lithapo bakeng sa li-module tsa SIM-16 a bontšoa tafoleng e latelang:

SIM-16 KHABELLO

Cable	Tlhaloso	Nomoro ea Karolo	Khokahano
CCL	CAN-CABLE-Long 30 in., 6-conductor	599-634214	E hokela P4 ho RNI ho SIM-16 ea pele. E boetse e hokela ho tloha ho SIM-16 ho isa ho li-module tsa FCM/LCM/SCM/CSB (mamating).
CCS	KA-CABLE-Short 5% in., 6-conductor	555-133539	E hokela li-module tsa SIM-16 ho SIM-16 kapa OCM-16 modules ka tatellano e le 'ngoe.

Bese ea CAN e hloka ho emisoa ha 120S pheletsong e 'ngoe le e 'ngoe ea lupu. Sheba Litaelo tsa Tlhophiso ea NIC-C, P/N 315-033240 bakeng sa lintlha tse mabapi le ho felisoa ha CAN.

LINTLHA TSEO

1. Lithapo tsohle li laoloa.
2. Matla ohle a likhoele a lekantsoe ho NFPA 70 ho NEC 760.
3. Wiring bakeng sa TB1 le TB2 ke 18 AWG min., 12 AWG max.
4. Wiring bakeng sa TB3 le TB4 ke 18AWG min., 16 AWG max.
5. CAN marangrang max. ho hanyetsa line 15S.
6. Sheba Litaelo tsa Tlhophiso ea NIC-C, P/N 315-033240 bakeng sa litaelo tsa ho emisa marang-rang a CAN.

Setšoantšo sa 3
SIM-16 Wiring Ntle le RNI

LINTLHA TSEO

1. Mabitso ha a laoloe.
2. 1A max @ 24VDC e hanyetsa.
3. Lithapo tsohle li tlameha ho lula ka har'a sebaka se koetsoeng kapa ka har'a maoto a 20 ka har'a conduit e thata.
4. Wiring bakeng sa TB1 le TB2 ke 18 AWG min., 12 AWG max.
5. Wiring bakeng sa TB3 le TB4 ke 18AWG min., 16 AWG max.

LITEKANYETSO TSA MOTSI

24V Back Plane ea Hona joale	0
Screw Terminal 24V ea Hona joale	20mA +1.2mA / kenyo e hlokometsoeng +20mA / relay e sebetsang
6.2V Back Plane ea Hona joale	0
24V Standby Hona Joale	20mA +1.2mA / kenyo e hlokometsoeng +20mA / relay e sebetsang
Matla a Output
CAN Network Pair	8V e phahameng ka ho fetisisa.
	75mA, max. (nakong ya phetiso ya msg)

LINTLHA TSEO

1. Litlhahiso tsohle li laoloa.
2. Matla ohle a kenyelelitsoeng a lekanyelitsoe ho NFPA 70 ho NEC 760.
3. Wiring bakeng sa TB1 le TB2 ke 18 AWG min., 12 AWG max.
4. Bohole ba limithara tse 500 ho tloha ho SIM-16 ho ea ho tse kentsoeng leihlo.
5. Ho Zeus Programming Tool, khetha e laoloang bakeng sa tlhahiso e 'ngoe le e 'ngoe e laoloang.
6. Maikutlo a hlokometsoeng le a sa laoleheng a ka tsoakoa ho SIM-16 e le 'ngoe.
7. Litlhahiso #1 - 16 li ka hlophiseha.

Setšoantšo sa 5
Mohala oa ho Kena o Okametseng oa SIM-16Setšoantšo sa 6
SIM-16 Mohala oa ho Kena o sa Lebelloang

Bakeng sa lits'ebetso tsa CE lits'ebetsong tsa Cerberus E100 bua ka
Taelo ea Tlhophiso A24205-A334-B844 (Senyesemane) kapa A24205-A334-A844 (Sejeremane).

Khoebo ea Siemens, Inc.
Building Technologies Division
Florham Park, NJ
Siemens Building Technologies, Ltd.
Tšireletso ea Mollo le Lihlahisoa tsa Tšireletso
2 Kenview Boulevard
Brampton, Ontario L6T 5E4 Canada
Siemens Gebäudesicherheit
GmbH & Co. oHG
D-80930 München

Litokomane / Lisebelisoa

SIEMENS SIM-16 Mojule oa Kenyeletso o Okametsoeng [pdf] Buka ea Taelo SIM-16, SIM-16 Mojule oa Kenyeletso o Okametsoeng, Mojule oa Kenyeletso o Okametsoeng, Mojule oa Kenyeletso, Mojule

Litšupiso

• Bukana ea Mosebelisi