200W AC Input Frequency e Fetohang
Drive Module e nang le Mosebetsi oa PFC
VFD-200C-230
VFD-200C-230 AC Input Variable Frequency Drive Module
 |
 |
| https://www.meanwell.com/Upload/PDF/VFD-E.pdf | https://youtu.be/I8xQxZdWf7A?si=u2BEOM4Fqx1beXny |
Likaroloana
- Kenyelletso ea 90 ~ 264Vac, e hahelletsoeng ka PFC ho 380VDC
- Matla stage, li-switch tsa 3-phase tse nang le li-sensor ka yuniti e le 'ngoe bakeng sa taolo ea kantle (boto ea taolo ea VFD-CB e rekisoa ka bongata)
- Tlhōrō e phahameng ea hona joale ho fihlela ho 200% le metsotsoana e 5
- Moralo o senang fan bakeng sa ts'ebetso e khutsitseng le bophelo bo bolelele
- Tšireletso: Short circuit / OCP
- Li-sensor tsa ka hare li fepa bakeng sa taolo: Sensor ea hajoale - taolo ea torque ea enjene
DC bese voltagsensor - OVP / UVP
Sensor ea mocheso - OTP - -30 ~ + 70 ° C bophara ba mocheso oa ho sebetsa
- E loketse 3-phase motor drive
(mohlala, BLDC, motor Induction, SynRM) - Warranty ea lilemo tse 3
Lisebelisoa
- HVAC
- Fane
- Pompo ea metsi/Moea
- Lisebelisoa tsa matla
- Conveyor
- Monyako o itekanetseng
- Lisebelisoa tsa boikoetliso
GTIN KHOUTU
MW Search: https://www.meanwell.com/serviceGTIN.aspx
Tlhaloso
VFD-200C-230 ke mochine oa motlakase oa motlakase o feto-fetohang o fanang ka matla a kopantsoeng.tage, bakhanni ba liheke le li-sensor tsa VFD tsa mantlha tse kang li-sensorer tsa mokhahlelo tse tharo tsa hona joale le tsa mocheso. Sehlahisoa sena se ka kenngoa ts'ebetsong bakeng sa tharollo ea koloi ea mekhahlelo e meraro ka ho hokahana le molaoli oa koloi oa kantle ho boemo ba logic le analog I/0. Matla stagKenyeletso ea e ke karolo e le 'ngoe e felletseng ho tloha ho 90VAC ho isa ho 264VAC e nang le ts'ebetso ea PFC. Phallo ea motlakase ea karolo ea 3 e fihla ho 240V e nang le 200% tlhōrō ea tlhōrō ea hona joale.VFD-200C-230 e loketse ho khanna likoloi tse tharo, tse kang BLDC;
Enjene ea induction, le lits'ebetso tsa SynRM.
Moetso oa khouto ea mohlala
TS'ELISO
| MOLELE NTS'E. | VFD-200-230 | ||||
| PWM SEHLOOHO (Tlhaloso ea 1,234) |
TLHOKOMELOTAGE RANGE (UVW) | 380Vmax, molumo oa mohala ho ea molengtage 0-268V e ka fetolehang ka PWM e fetotsoeng, e loketseng 3PH 200-240V enjene ea sehlopha | |||
| KHABANE | E lekantsoe | 0.8A | |||
| Tlhōrō | 1.6A bakeng sa metsotsoana e 5 | ||||
| REKETSO MATLA | 200W | ||||
| KHOTHAMO | 92% | ||||
| DC BESE MOLULATAGE | 380 ±5VDC | ||||
| PWM MOEKETSI | 2.5 KHz -15 KHz | ||||
| KEKETSO | RELEBOHILE KENYA MOLELETAGE | 90 - 264VAC | |||
| INPUT FREQUENCY RANGE (Hz) | 47 - 63Hz | ||||
| SEBETSO SA MATLA (Typ.) | PF>0.99/115VAC, PF >0.93/230VAC e tletse | ||||
| REKETSO KHOLO | 3.5A/115VAC 2Al230VAC | ||||
| TLHOKOMELLO CHELE | Ho bata ho qala 50A /230VAC | ||||
| LEAKAGE NKHOANE | <2mA/240VAC | ||||
| TAOLA! MOSEBETSI (Tlhaloso ea 5) |
3•TAOLO YA PWM YA MPHATO | Letšoao la taolo la PWM ho mokhanni oa heke bakeng sa li-IGBT. (CN93, PING-13) 33V TTL/CMOS input: Hiqh(>2.7V): IGBT ON ; Tlase(<0.4V): IGBT OFF |
|||
| 3-MOHATO JOALE | Lihanyetsi tsa shunt tse hahiloeng ka har'a 100mO tse tlase karolong ea UVW (CN93, PI144-6) | ||||
| DC BESE MOLULATAGE TS'ELISO | DC BUS voltagtlhahiso ea sensor ea e (CN93, PINT) 2.5V@DC BUS 380V | ||||
| MOEKETSI WA SEBOKO | E hahelletsoeng ka 10K0 NTC bakeng sa ho utloa mocheso o sebetsang oa IGBT. (TSM2A103F34D1R (Thinking Electronic), PI N3 ea CN93) | ||||
| POTSO POTSO | Letšoao la phoso la inverter(Short circuit/OCP, CN93, PI N7). 3.3V TTL / CMOS tlhahiso: Tloaelehileng: Hiqh (> 3V); E sa tloaelehang: Tlase(<0.5V) |
||||
| MOTLATSI MATLA | Matla a tsoang ho 15V a sa itšehla thajana bakeng sa boto ea taolo ea kantle (CN93, PIN 14 ho isa PI142 ) 15V@0.1A; Mamello +/- 0.5V, Ripple 1Vp-p max | ||||
| TS'IRELETSO | POTOLOHO E KHUTSOANE | Mofuta oa ts'ireletso : Koala o/p voltage, matlafatsa hape ho fola | |||
| TIKOLOHO | MOSEBETSI TEMPELA. | -30 - +70°C (Sheba “D rearing Curve) | |||
| MOSEBETSI MOKOBELO | 20 - 90% RH e sa konkanyeng | ||||
| POLOKO TEMP., MONATE | -40 - +85 ° C, 10 - 95% RH e sa tsitsang | ||||
| TSIETSO | 10 - 500Hz, 2G 10min./Tcycle, nako ea 60min. e 'ngoe le e 'ngoe e bapile le lilepe tsa X, Y, Z | ||||
| TŠIRELETSO LE EMC | TS'IRELETSO MAEMO | CB I EC61800-5-1,TUV/BS EN/EN61800-5-1,EAC TP TC004 e amohetsoe | |||
| EMELANG KOLOKOTAGE | I/P-FG:2KVAC | ||||
| HO IKAOA KHANYETSO | I/P-FG:100M Ohms/500VDC!25°C! 70% RH | ||||
| EMC TS'ISITSO | Paramethara | Standard | Boemo ba Teko ke Hlokomela | ||
| E etsoa | TS EN/EN IEC61800-3 | Sehlopha sa A, C2 | |||
| E khantsitsoe | TS EN/EN IEC61800-3 | Sehlopha sa A, C2 | |||
| E tsamaellanang hona joale | TS EN/EN IEC61000-3-2 | Sehlopha sa A | |||
| Moqtagle Flicker | TS EN/EN61000-3-3 | ||||
| TSIETSI EMC | BS EN/EN IEC61800-3, tikoloho ea bobeli | ||||
| Paramethara | Standard | Boemo ba Teko /Note | |||
| ESD | TS EN/EN61000-4-2 | Boemo ba 3, moea oa 8KV; Level 2, 4KV ikopanya | |||
| E khantsitsoe | TS EN/EN IEC61000-4-3 | Mohato oa 3 | |||
| EFT / Burest | TS EN/EN61000-4-4 | Mohato oa 3 | |||
| Ho phahama | TS EN/EN61000-4-5 | Boemo ba 3, 2KV / Line-Earth; Level 3, 1KV/Mola-Mola | |||
| E etsoa | TS EN/EN61000-4.6 | Mohato oa 3 | |||
| Tšimo ea Magnetic | TS EN/EN61000-4-8 | Mohato oa 4 | |||
| Moqtage Dips le Litšitiso | TS EN/EN IEC61000-4-11 | >95% dip 0.5 linako, 30% d IP 25 linako, >95% litšitiso 250 linako | |||
| Moqtage kheloha | Sehlopha sa 61000 sa IEC 2-4-2 | ±10% Un | |||
| Total Harmonic distortion (THD) Litaelo tsa motho ka mong tsa Harmonic | Sehlopha sa 61000 sa IEC 2-4-3 IEC 61000-4-13 Sehlopha sa 3 | THD 12% | |||
| Ho fapana ha maqhubu | Tlhaloso: IEC 61000-2-4 | ±4% | |||
| Sekhahla sa phetoho | Tlhaloso: IEC 61000-2-4 | 2%/s | |||
| BA BANG | MTBF | 2568.7K hrs min.Telcordia SR-332 (Bellcore); 203.8K hrs m in.M IL HDBK-217F (25°C) | |||
| DIMENSION (L'WII) | 146'55'26 limilimithara | ||||
| PAKA | 0.31 Kg;40pcs/13.3kg/0.87CUFT | ||||
| HLOKOMELA | 1.3-mohato oa 220V motor e buelloa. Ka kopo, nahana ka tekanyo e lekantsoeng ha e sebelisoa bakeng sa motlakase oa sehlopha sa 100-120V. 2.Sheba tlhōrō ea bokhoni ba hona joale ho "V / I Curve". 3.Efficiency e lekoa ka mojaro oa inductive ho rated hona joale le matla a feletseng. 4.Mekhahlelo eohle HA e boleloe ka ho khetheha e lekantsoe ho 230VAC ho kenya, ho lekanngoa mojaro le 25 ° C ea mocheso o potolohileng. 5.Ka kopo sheba "Functional Manual" bakeng sa lintlha tse ling.  Boitlhotlhollo ba Boikarabelo ba Sehlahisoa Bakeng sa tlhaiso-leseling e batsi, ka kopo sheba ho https://www.meanwell.com/serviceDisclaimer.aspx |
||||
Setšoantšo se Thibeloang
Buka ea mosebetsi
- Taolo ea PWM ea 1.3-mohato (CN93, PIN8~13)
VFD-200C-230 e fana ka potoloho ea li-switch tse tšeletseng ka ho sebelisa 3 half-bridge IGBTs. Li-IGBT tsa mohato ka mong li laoloa ke
(PIN 8~13). Tlhokahalo ea ho kenya PWM e lumellana le matšoao a mabeli a TTL le CMOS 3.3V. Ka kopo sheba setšoantšo se ka tlase. 
TLHOKOMELISO: Hoa hlokahala ho boloka bonyane nako ea ho shoa pakeng tsa switjha e holimo le e tlase ea mohato ka mong.
- 2.3 (CN93, PIN4~6)3-mohato oa XNUMX-mohato oa ho Fumaneha ha Hona Joale le Tšireletso e Fetileng
Li-shunt-side shunt resistors 100mΩ li kentsoe karolong e 'ngoe le e 'ngoe ea VFD-200C-230 bakeng sa tekanyo ea nako e khutšoanyane le ho lemoha nako e khutšoanyane. Ho khothaletsoa ho khutsufatsa bolelele ba potoloho ea ponelopele ea kantle le ho lemoha lets'oao ka li-OPA. Ka kopo sheba setšoantšo se ka tlase.
Haeba tlhahiso ea hona joale e feta 200% ea boleng bo lekantsoeng, potoloho ea tšireletso ea ka hare e tla qala ebe e koala mokhanni oa heke bakeng sa tšireletso.
- DC BUS VoltagHo fumanoa ha e (CN93, PIN1)
VFD-200C-230 e hahiloe kahare ka bese ea DC voltagsensor ea e (HV+ sensor, PIN 1). Sensor e fana ka tlhahiso ea 2.5V ha DC bese voltagE ka 380V. Ho khothaletsoa ho bona lets'oao ke li-OPA. Ha voltage ea bese ea DC e feta 420V, lets'oao la ho kenya PWM le tlameha ho tima bakeng sa ts'ireletso.
- Ho lemoha mocheso oa IGBT (CN93, PIN3)
VFD-200C-230 e hahiloe ka har'a mohanyetsi oa NTC bakeng sa ho bona mocheso oa IGBT. Basebedisi ba ka lemoha mocheso oa IGBT bakeng sa tšireletso. (Mofuta oa NTC: TSM2A103F34D1R, Thinking Electronic) Potoloho e khothalletsoang ea ho lemoha e ka tlase. Ho khothaletsoa ho koala sekheo sa PWM, haeba mocheso o kaholimo ho 95 ℃.
- Letšoao la phoso
Haeba VFD-200C-230 e kopana le boemo bo feteletseng 'me e lula e le boemong boo bakeng sa nako e fokolang ea nako e telele, lets'oao la FAULT le tla sebelisoa (le sebetsang tlase) ho tsebisa molaoli oa kantle kapa potoloho.
- Litlhahiso tsa Brake(CN100,PIN1,3)
VFD-200C-230 e boloketsoeng CN100 PIN1,3 e hokelang ho HV+,HV- bakeng sa moralo oa potoloho ea mariki.
Boholo voltage ho DC Bus(HV+) e ke ke ea ba holimo ho 420V.
Tlhaloso ea Mechini
AC Input Terminal Pin NO. Mosebetsi (TB1)
| Pin No. | Kabelo |
| 1 | Tsela ea AC / L. |
| 2 | Tsela ea AC / N. |
| 3 |  |
Qutput Terminal Pin NO. Mosebetsi (TB100)
| Pin No. | Kabelo |
| 1 | U |
| 2 | V |
| 3 | W |
380V DC Bus Connector(CN100): JST B3P-VH kapa e lekanang le eona
| Pin No. | Kabelo ea AW |
| 1 | HV+ |
| 2 | Ha ho Pin |
| 3 | HV - |
Matlo a tlhapi: JST VHR kapa e lekanang
Theminale: JST SVH-21T-P1.1 kapa e lekanang le eona
CN100 e sebelisetsoa ho kenya sesebelisoa sa brake se tsosolosang, ho qoba tšenyo ea VFD-200C-230.
Control Pin NO. Mosebetsi (CN93) : HRS DF11-14DP-2DS kapa e lekanang le eona
| Pin No. | Kabelo | Pin No. | Kabelo |
| 1 | HV+ sensor | 8 | PWM_W H |
| 2 | HV- | 9 | PWM_W L |
| 3 | RTH | 10 | PWM_V H |
| 4 | RsH U | 11 | PWM_V L |
| 5 | RsH V | 12 | PWM_U H |
| 6 | RSH_W | 13 | PWM_U L |
| 7 | PHOTO | 14 | Khaba ea _ 15V |
Bolulo ba bohlapi: HRS DF11-14DS kapa e lekanang le eona
Theminale HRS DF 11-**SC kapa e lekanang le eona
Mosebetsi oa Pin ea Taolo(CN93):
| Pin No. | Mosebetsi | Tlhaloso |
| 1 | HV+ sensor | DC BUS voltagtlhahiso ea sensor, ho buuoa ka pin 2 (HV-) |
| 2 | HV- | DC BUS voltagsebaka sa tlhahiso ea sensor |
| 3 | RTH | Sensor ea mocheso |
| 4 | RSH_U | U phase current sensor output |
| 5 | RSH_V | Phaello ea hona joale ea sensor ea V phase |
| 6 | RSH_W | W phase current sensor output |
| 7 | PHOTO | Ho fumaneha ha hajoale. Tloaelehileng> 3V, e sa tloaelehang <0.5V |
| 8 | PWM_W H | W phase high side logic input, on > 2.7V; ho tloha ho 0.4V |
| 9 | PWM_W L | W phase low low side logic input, on > 2.7V; ho tloha ho 0.4V |
| 10 | PWM_V H | V phase high side logic input, on > 2.7V ; ho tloha ho 0.4V |
| 11 | PWM_V L | V phase low low side logic input, on > 2.7V ; ho tloha ho 0.4V |
| 12 | PWM_U H | U phase high side logic input, on > 2.7V ; ho tloha ho 0.4V |
| 13 | PWM_U L | U phase low side logic input, on > 2.7V ; ho tloha ho 0.4V |
| 14 | Vaux_15V | Auxiliary voltage tlhahiso ea 15V e bua ka pint (HV-). Boemo bo phahameng ba hona joale ke 0.1A |
Kopo
Mohlala oa kopoampLe: Kopo ea koloi ea BLDC
- Palo e bonts'a sistimi ea koloi ea BLDC e thehiloeng ka VFD-200C-230.
- Bahlahisi ba ka laola lets'oao la PWM la 6-switch ka ho sebelisa SPWM kapa SVPWM, joalo-joalo bakeng sa 3-phase vol.tage feto-fetoha le maemo, 'me u hahe mokhoa oa ho laola li-sensor tsa hajoale tsa shunt ho switch ea lehlakore le tlase la 3-mohato (RSH_U/V/W) le DC BUS vol.tagsensor ea e (HV-+ sensor) e fanoeng ke VFD-200C-230.
- Bahlahisi ba ka khetha li-sensor tse loketseng tsa boemo ba BLDC joalo ka encoder kapa Hall-effect sensors ho lekana lits'ebetso tsa bona.
- Ho khothaletsoa ho kenya brake circuit/sesebediswa ho HV-+/HV- pin(DC BUS,CN100) ho qoba DC BUS OVP ha BLDC e theohile.
- Ho khothaletsoa ho koala sekheo sa PWM kapa ho hokela sesebelisoa sa brake resistor bakeng sa polokeho ha DC Bus vol.tage phahame ho feta 420V.
- Haeba VFD-200C-230 e ne e sebelisoa ka taolo e sa nepahalang, joalo ka ho potlakisa haholo kapa taolo e mpe ea hajoale, e ka baka boemo ba phoso ba VFD-200C-230 ho koala phallo ea phallo.tage (boemo bo tlase ho phini ea FAULT).
Ho kenya
- Sebetsa ka poleiti e eketsehileng ea aluminium
E le ho kopana le *Derating Curve"le "Static Characteristics* VFD series e tlameha ho kenngoa holim'a poleiti ea aluminium (kapa khabinete ea boholo bo lekanang) ka tlase. Boholo ba poleiti ea aluminium e hlahisitsoeng e bontšitsoe ka tlase. 'Me bakeng sa ho ntlafatsa ts'ebetso ea mocheso, poleiti ea aluminium e tlameha ho ba le bokaholimo bo lekanang le bo boreleli (kapa e koahetsoeng ka mafura a mocheso), le VFD letoto le tlameha ho behoa ka thata bohareng ba poleiti ea aluminium.
- Ka moea o qobelloang oa 15CFM
Lethathamo la lisebelisoa
Haeba u na le tlhokahalo efe kapa efe ea taolo ea kopo e ikhethileng, ka kopo ikopanye le MEAN WELL bakeng sa lintlha tse ling.
Boto ea taolo ea makoloi (Boto ea taolo ea makoloi le module ea koloi ea VFD e lokela ho laeloa ka thoko)
| Odara ea MW No. | Boto ea Taolo | Tlhahiso ea Kopano | Bongata |
| VFD-CB |  |
 |
1 |
Tšebeliso e Tloaelehileng
- Variable Frequency Module (VFD series)
- Boto ea taolo ea Variable Frequency Drive (E entsoe ke Mosebelisi kapa Soluton E fanoe keMEAN WELL)
- 3-mohato Pump Motor
- Betri
- Variable Frequency Module (VFD series)
- Boto ea taolo ea Variable Frequency Drive (E entsoe ke Mosebelisi kapa Soluton E fanoe ke MEAN WELL)
- 3-phase Wheel Motor bakeng sa Kopo ea AGV
- Variable Frequency Module (VFD series)
- Boto ea taolo ea Variable Frequency Drive (E entsoe ke Mosebelisi kapa Soluton E fanoe ke MEAN WELL)
- 3-mohato Fan Motor
- HEPAfor Sefa Moea
TŠEBELETSO KOTLO
Ka kopo, ikopanye le MEAN WELL bakeng sa lintlha tse ling.
VFD Demo Kit Mosebetsi oa Sehlooho le Likarolo.
- E hahelletsoeng ka VFD-350P-230 le 230V motor.
- Ho qala/ emisa/ pele/ ho kgutlela morao/ taolo ya lebelo.
- Qala / emisa / pele / reverse indicator ka ho le letona.
- Pontšo ea lebelo la koloi (RDM).
- Boto ea taolo e ka nkeloa sebaka.
- Ts'ehetsa khokahano ea motlakase kantle.
Bukana ea ho kenya
Ka kopo, sheba: http://www.meanwell.com/manual.html
Litokomane / Lisebelisoa
 |
MEAN WELL VFD-200C-230 AC Input Variable Frequency Drive Module le Mosebetsi oa PFC [pdf] Buka ea Mong'a VFD-200C-230, VFD-200C-230-20240812, VFD-200C-230 AC Input Variable Frequency Drive Module le PFC Function, VFD-200C-230, AC Input Variable Frequency Drive Module le Variable Frequency Drive Module le PFC Function Drive Mosebetsi oa PFC, Frequency Drive Mojule o nang le Ts'ebetso ea PFC, Drive Module e nang le Ts'ebetso ea PFC, Mojule o nang le Mosebetsi oa PFC, o nang le Ts'ebetso ea PFC, Mosebetsi oa PFC, Mosebetsi |