JAMARA 081459 Karete ea Lenaneo

Tlhahisoleseding ya Sehlahiswa

Karete ea Lenaneo, No. 081459, ke sehlahisoa se entsoeng ke JAMARA eK Ke karete e hlophisitsoeng e sebelisetsoang ho lokisa le ho iketsetsa maemo a ESC (Electronic Speed ​​Controller) koloing ea mohlala. Karete e lumella basebelisi ho fetola liparamente tse fapaneng joalo ka cutoff voltage, nako ea motlakase, moeli oa ho thiba, peresente ea brakingtage, potoloho ea motlakase, le mefuta e sa nke lehlakore.

JAMARA eK ha e ikarabelle bakeng sa tšenyo leha e le efe e bakiloeng sehlahisoa kapa tšenyo e 'ngoe e bakoang ke ts'ebetso e fosahetseng kapa liphoso tsa ho sebetsana le tsona. Moreki ke eena feela ea ikarabellang bakeng sa tšebeliso e nepahetseng le ho sebetsana le sehlahisoa, ho kenyeletsoa kopano, ts'ebetso ea ho tjhaja, tšebeliso, le khetho ea sebaka sa tšebetso. Ho bohlokoa ho bala le ho latela litaelo tsa ts'ebetso le tsa mosebelisi tse fanoeng, kaha li na le tlhaiso-leseling ea bohlokoa le litemoso.

Sehlahisoa, karete ea Programming No. 081459, e lumellana le Directive 2014/30/EU le 2011/65/EU. EU Declaration of Conformity e ka fumanoa atereseng e latelang ea Marang-rang: www.jamara-shop.com/Conformity.

Litaelo tsa Tšebeliso ea Sehlahisoa

Ka kopo bala litaelo tse felletseng le litaelo tsa ts'ireletso ka hloko pele u sebelisa mohlala ho netefatsa ts'ebeliso e bolokehileng le e nepahetseng.

1. 1. Ho sebelisa Karete ea Lenaneo:
      1. Bulela ESC (Electronic Speed ​​Controller) ebe o hokela karete ea lenaneo.
      2. DE: Schalten Sie den Regler o ntse a tsoela pele
      3. GB: Bulela ESC. Tlosa mohala oa Letšoao
   2. Ho hlophisa ESC:
      1. Sefako Sa Menoaneng Voltage: Itse ka tsela e iketsang palo ea lisele tsa betri ea hau. Hlophisa mofuta oa libeteri le Low Voltage Cutoff Threshold o sebelisa software ea PC kapa karete ea lenaneo. ESC e tla emisa ho sebetsa haeba betri e le matlatage ea ka tlase ho moeli o behiloeng esale pele.
      2. Nako ea Likoloi: E fetola sehlopha sa matla le katleho ea koloi ea motlakase. Setting ya kamehla ke Tlwaelehile.
      3. Throttle Percent Reverse: E fokotsa matla a teng ho reverse throttle. Palo e tlasetage fokotsa lebelo le fumanehang ka morao.
      4. Throttle Limit: E laola lebelo la throttle pele. Palo e tlasetage fokotsa lebelo le fumanehang ka pele throttle.
      5. Peresentetagle Braking: E fetola palo ea mariki a kentsoeng koloing. Liphesente tse phahamengtage fana ka braking e matla.
      6. Phetoho ea Enjene: E beha potoloho ea enjene
         tataiso. Setting ya kamehla ke Tlwaelehile.
      7. Range e Neutral: E fetola palo ea Deadband e sa nke lehlakore ho throttle trigger. Litekanyetso tse nyane li hloka hore motho a tlohe bohareng e le hore a qale ho sebetsa.
   3. Lithibelo tsa ho Lahla:

Lisebelisoa tsa motlakase, ho kenyeletsoa sehlahisoa sena, ha lia lokela ho lahleloa litšila tsa lapeng. Ka kopo, li lahle ka thoko, ho latela melao ea lehae. Haeba ho khoneha, tlosa libeteri pele li lahla. Haeba data ea hau e bolokiloe sesebelisoa, etsa bonnete ba hore e tlositsoe pele e lahla.

Litokelo tsohle li sirelelitsoe. Copyright JAMARA eK 2023. Ho kopitsa kapa ho hatisa ka botlalo kapa ka karolo feela ka tumello e fanoeng ke JAMARA eK

Lintlha tse akaretsang

JAMARA eK ha e ikarabelle bakeng sa tšenyo leha e le efe e bakiloeng sehlahisoa ka bosona kapa ka sena, ha feela sena se bakoa ke ts'ebetso e sa lokelang kapa liphoso tsa ho sebetsana le tsona. Moreki a le mong o jara boikarabelo bo felletseng ba tšebeliso e nepahetseng le ho sebetsana le eona, ho kenyeletsoa ntle le meeli, kopano, mokhoa oa ho tjhaja, tšebeliso le khetho ea sebaka sa tšebetso. Ka kopo sheba litaelo tsa ts'ebetso le tsa mosebelisi, e na le tlhaiso-leseling ea bohlokoa le litemoso.

Setifikeiti sa ho lumellana

Ka hona, JAMARA eK e phatlalatsa hore sehlahisoa sa "Programming card, No. 081459" e lumellana le Directive 2014/30/EU le 2011/65/EU. Temana e felletseng ea EU Declaration of Conformity e fumaneha atereseng e latelang ea Marang-rang:
www.jamara-shop.com/Conformity

Bala litaelo tse felletseng le litaelo tsa ts'ireletso ka hloko pele u sebelisa mohlala. Tlhokomeliso! Ka kopo bala litemoso / litaelo tsa polokeho ka botlalo le ka hloko. Tsena ke tsa ts'ireletso ea rona mme li ka qoba likotsi / likotsi.

Ho sebelisa karete ea CR Program

1. Bulela ESC. Tlosa terata ea Signal ebe u e kenya ka har'a topsocket ho karete ea Lenaneo (6), emela metsotsoana ea 2 ho fihlela LED e ON. Mosebetsi oa pele o hlophisitsoeng o tla bontšoa.
2. Haeba ESC e sa hokahane le libeteri, karete ea Lenaneo e lokela ho hokahanngoa le phepelo e 'ngoe ea motlakase, sebaka sa phepelo ea motlakase se ka har'a 5.0 - 6.3 V.
3. Tobetsa konopo ea "Menu" (2) kareteng ea Lenaneo 'me u khethe ntho e' ngoe le e 'ngoe e ka etsoang ka selikalikoe. Ka nako eo palo ea mosebetsi o hlophisitsoeng o tla bontšoa ka ho le letšehali la LED, boleng ba hona joale bo tla bontšoa ka lehlakoreng le letona. Ebe o tobetsa konopo ea "Value" (3) ho fetola boleng ebe o tobetsa konopo "OK" (4) ho netefatsa. Ka nako e ts'oanang, li-LED tse khubelu tse bontšang karete ea lenaneo ka bobeli le ho panya ha ESC. Tima ESC, litlhophiso tse fetotsoeng li tla bolokoa mohopolong oa ESC.
4. Tobetsa konopo "Reset" (5) ho khutlisetsa litlhophiso tsa kamehla.

Sefako Sa Menoaneng Voltage

Fumana palo ea lisele ka tsela e iketsang.
Ho ea ka mofuta oa libeteri tsa hau, theha mofuta oa libeteri le Molumo o tlasetage Cutoff Threshold ka software ea PC kapa karete ea lenaneo. ESC e khona ho lemoha Voltagea betri ka nako efe kapa efe mme e tla emisa ho sebetsa hang ha VoltagE ea betri e tlase ho feta e setelitsoeng esale pele Molumo o tlasetage Cutoff Threshold.

Mokhoa oa ho matha

• Fetela pele w/o Reverse
  Ena ke peiso ea Race - Reverse e koetsoe. U tla fumana peisong, lipina tse ngata li ke ke tsa u lumella ho matha ka ho khutlisa.
• Tsoela pele ka khefu ebe u Khutlela morao: (Kamehla)
  Bashing ka kakaretso (FUN) kapa peiso haeba ho lumeloa ho khutlela morao bakeng sa ketsahalo. Electronic Speed ​​Controller e hloka metsotsoana ea 2 ea ho se nke lehlakore ho tloha ho transmitter pele e lumella reverse ho sebetsa.
  Hlokomela:
  Ho na le ts'ireletso ea boiketsetso ka har'a ESC. Ke feela ka mor'a hore u eme 'me u khutlisetse trigger ho se nke lehlakore e tla ba teng. Haeba ha u ntse u tsamaea ka morao, hula leqhubu ho ea pele. Sena ke ho thusa ho thibela ts'enyehelo e kholo ho terene ea koloi.
• Ho ya pele/ Ho furalla
  Haeba khetho e sebetsa, koloi ea RC e ka ea pele le morao, empa ha ea ka ea robeha.

Motor Nako

Khetho ena e ama sehlopha sa matla le katleho (nako ea ho matha) ea motlakase oa motlakase. Ntho ea kamehla ke "Tloaelehileng" 'me ke sebaka se setle sa ho qala ho fana ka matla le ho fana ka nako e ntle ea ho sebetsa.

• Tlase Haholo
  E fana ka katleho e kholo ka matla a fokolang. Nako e phahameng e hlahisa matla a mangata haholo empa ka litšenyehelo tsa ts'ebetso (nako e fokolang ea nako) 'me hangata koloi e tla hlahisa mocheso o mongata. Enjene e 'ngoe le e' ngoe e se nang brush e tla arabela nako ka tsela e fapaneng. E ntle bakeng sa ho matha sebakeng se katiloeng, kapa libakeng tse thata ho feta, le ho matha ka li-motor tse phahameng tsa KV kapa tse tlase.
• Tlase
  E fana ka matla a ho matha libakeng tse bonolo, ho ithabisa le ho nka nako e telele.
• Tlwaelehileng (Tlhaloso)
  Motsoako o motle oa matla le ts'ebetso e ntle ka ho sebelisa enjene efe kapa efe e Phahameng Matla a Ho feta ho sebetsa hantle kahoo nako ea ho matha e tla fokotseha, 'me u lokela ho beha leihlo mocheso oa koloi. KV e phahameng kapa li-motor tse tlase li tla hlahisa mocheso kapele ka mokhoa ona. Sebaka se sireletsehileng sa mocheso o phahameng ke 165F ho isa ho 180F (74° - 82°C), ho ea holimo ho ka senya koloi ea hau.
• Holimo haholo
  Ena ke matla a phahameng ka ho fetisisa 'me a tlameha ho sebelisoa ka hloko. Hlokomela: Enjene efe kapa efe e na le monyetla oa ho chesa ho feta tekano sebakeng sena. Sheba mocheso oa motlakase khafetsa 'me u netefatse hore ha o sebetse ho feta 165° le 180° Fahrenheit.
  (74°- 82° C), e ka senyang enjene ya hao, kapa ya senya Electronic Speed ​​Controller (ESC) ya hao.

Potlako ea Pele

Sebelisa sena ho fokotsa matla a pele a romelloang ho enjene ha o qala ho emisa ka botlalo.
Ho sebelisa khetho e tlase, koloi e tla qala butle haholo mme e fane ka nako e telele ka ho fetisisa ea ho matha. Ha u sebelisa khetho ea HIGH, u tla ba le lebelo la ho bilika ha mabili ka theko ea nako ea ho matha. Sena se boetse se thata haholo ho li-betri joalo ka amppherekano e ka ba holimo haholo. Haeba koloi ea hau e khaola, e tsilatsila kapa e lahleheloa ke taolo ea seea-le-moea, u lokela ho nahana ka ho beha sena ka boleng bo tlase.

• Tlase
  Ho sebelisa khetho ena ho tla fana ka nako e telele ea ho sebetsa 'me ho bonolo ho feta libeteri. Ke khetho e ntle bakeng sa ba qalang.
• Mahareng
  Medium e hloka ho eketsehileng ho tsoa libetering tsa hau, 'me e loketse libaka tse tlase tse hohelang.
• Phahameng
  Khetho ena e tla fana ka lebelo le felletseng mme e hloka libeteri tse matla ho fana ka mojaro o hlokahalang sebakeng sena.
• Holimo haholo
  Khetho ena e tla fana ka lebelo le felletseng mme e hloka libeteri tse matla ho fana ka mojaro o hlokahalang sebakeng sena.

Throttle Percent Reverse
Sebelisa sena ho fokotsa matla a teng u sebelisa reverse throttle. Ha liperesente tse tlase kapa boemo bo tlase lebelo le tlase le tla fumaneha ka morao. 20%, 30%, 40%, 50%, 60% (Default), 70%, 80%, 90%, 100%

Throttle Limit
Ha liperesente li le tlase ho tla ba le lebelo le tlase la throttle pele.0%(Default), 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90%

Peresentetage Braking
E u fa bokhoni ba ho ba le taolo e felletseng holim'a palo ea brake eo koloi ea hau e tla ba le eona. 10%, 20%, 30%, 40%, 50% (Default), 60%, 70%, 80%, 100%

Peresentetage Hula Brake
0% (Default), 4%, 8%, 12%, 15%, 20%, 25%, 30%
Mosebetsi oa ho hula mariki o fa mokhanni palo e itsengtage ea brake ha transmitter e lutse e sa nke lehlakore. Sena se tla theha "maikutlo" a enjene ea brushed. Ho sebelisoa mariki a hulang ho matha ho fokotsa koloi ha u ntse u theoha u atamela hukung khahlano le mokhanni ea tlamehang ho sututsa mariki hukung e 'ngoe le e 'ngoe. Leka ho sebetsana le sena ho utloisisa hore na u ka sebelisa sena joang pina ea hau. Haeba u matha ka pina e phahameng e nang le likhutlo tse thata, boemo bo matla bo lokela ho sebetsa hantle. Haeba u matha sebakeng se bulehileng, u tla fumana liperesente tse nyanetage tla fella ka taolo e ntlafetseng. Haeba u matha libakeng tse lerōle kapa tse thellang, u tla batla ho sebelisa khetho e tlaase ka ho fetisisa.

Phetoho ea makoloi

Tloaelehileng (kamehla), Reverse

Boemo ba ho se nke lehlakore

Tlhophiso ena e lokisa palo ea "Deadband" e sa nke lehlakore ho throttle trigger. Sena se ho Milli-Seconds (MS) 'me ke palo ea ho se nke lehlakore ha u hula mochini. Ha boleng ba boleng bo nyane bo hloka "Deadband" kapa motsamao o fokolang o hlokahalang ho tloha bohareng hore ESC e qale mesebetsi ea throttle. Ho sebelisa boleng bo phahameng bakeng sa tlhophiso ena ho tla fana ka Deadband e pharaletseng.

• 2%
• 3%
• 4% (E sa feleng)
• 5%
• 6%
• 10%

Lithibelo tsa ho lahla
Lisebelisoa tsa motlakase ha lia lokela ho lahleloa litšila tsa lapeng 'me li tlameha ho lahleloa ka thoko. U tlamehile ho ntša libeteri, haeba ho khoneha, le ho lahla thepa ea motlakase libakeng tsa pokello ea sechaba. Haeba lintlha tsa hau li ka bolokoa sesebelisoa sa motlakase u tlameha ho li tlosa u le mong.

Setsi sa litšebeletso

• JAMARA eK, Manuel Natterer, Am Lauerbühl 5, DE-88317 Aichstetten,
• Mohala +49 (0) 7565 9412-0,
• Fax +49 (0) 7565 9412-23,
• info@jamara.com,
• www.jamara.com

JAMARA eK

• Inh. Manuel Natterer
• Ke Lauerbühl 5 - DE-88317 Aichstetten
• Mohala +49 (0) 75 65/94 12-0
• Fax +49 (0) 75 65/94 12-23
• info@jamara.com
• www.jamara.com
• Tšebeletso - Mohala. +49 (0) 75 65/94 12-777
• service@jamara.com

Litokomane / Lisebelisoa

JAMARA 081459 Karete ea Lenaneo [pdf] Litaelo 081459, 081459 Programming Card, Programming Card, Card

Litšupiso

• Bukana ea Mosebelisi