Sehlahisoa sa Control4 C4-CORE3 Core 3 Controller

Tataiso ea ho Kena
Mohlala o tšehelitsoeng

• C4-CORE3
  Control4 CORE 3 Hub & Controller

Selelekela

E etselitsoe boiphihlelo bo ikhethang ba likamore tse ngata, Control4® CORE 3 Controller ke motsoako o phethahetseng oa molumo o phahameng oa audio le othomathike e bohlale bakeng sa merero e menyenyane ho isa bohareng. CORE 3 e fana ka sebopeho se setle, se hlakileng, le se arabelang skrineng sa mosebelisi se nang le bokhoni ba ho theha le ho ntlafatsa boiphihlelo ba boithabiso bakeng sa TV efe kapa efe ka tlung. CORE 3 e ka hlophisa lisebelisoa tse fapaneng tsa boithabiso ho kenyelletsa libapali tsa Blu-ray, li-satellite kapa li-cable box, li-consoles tsa lipapali, li-TV, le sehlahisoa sefe kapa sefe se nang le taolo ea infrared (IR) kapa serial (RS-232). E boetse e na le taolo ea IP bakeng sa Apple TV, Roku, lithelevishene, li-AVR, kapa lisebelisoa tse ling tse hokahaneng le marang-rang, hammoho le taolo e bohlale ea othomathike e sebelisang khokahano, relay, le taolo e sireletsehileng ea Zigbee le Z-Wave bakeng sa mabone, li-thermostats, liloko tse bohlale, le tse ling Bakeng sa boithabiso, CORE 3 e boetse e kenyelletsa seva sa 'mino se hahelletsoeng ka har'a se u lumellang hore u mamele laebrari ea hau ea' mino, ho phallela ho tsoa lits'ebeletso tse fapaneng tsa 'mino tse etellang pele, kapa lisebelisoa tsa hau tse nolofalitsoeng ke AirPlay u sebelisa theknoloji ea Control4 ShairBridge.
Likahare tsa lebokose
Lintho tse latelang li kenyelelitsoe lebokoseng la taolo la CORE 3:

• CORE 3 molaoli
• Khoele ea motlakase ea AC
•  Li-emitters tsa IR (3)
• Litsebe tse hlabang (2)
• Maoto a rabara (2)
•  Manakana a kantle (2, 1 bakeng sa Zigbee le 1 bakeng sa Z-Wave)
•  Terminal block bakeng sa ho ikopanya le ho fetisetsoa

Lisebelisoa tse teng bakeng sa ho rekoa

• Bracket ea CORE 3 ea Mount (C4-CORE3-WM)
• Control4 3-Meter Wireless Antenna Kit (C4-AK-3M
• Control4 Dual-Band Wi-Fi USB Adapter (C4-USBWIFI KAPA C4-USBWIFI-
• Control4 3.5 mm ho isa ho DB9 Serial Cable (C4-CBL3.5-DB9B)

Litlhoko le litlhaloso

•  Marang-rang a Ethernet kapa a Wi-Fi a lokela ho kengoa pele o qala ho kenya CORE 3 controller.
•  CORE 3 e hloka OS 3.3 kapa e ncha.
  Software ea Composer Pro ea hlokahala ho lokisa sesebelisoa sena. Sheba Tataiso ea Mosebelisi ea Composer Pro (ctrl4.co/cpro-ug) ho fumana lintlha.

Litemoso
Tlhokomeliso!
Ho fokotsa kotsi ea ts'oaetso ea motlakase, u se ke ua pepesetsa sesebelisoa sena pula kapa mongobo.

•  Boemong ba hajoale ho USB, software e tima tlhahiso. Haeba sesebediswa se hoketsweng sa USB se sa bonahale se bulela, tlosa sesebediswa sa USB ho molaodi.
  

Litlhaloso

Lisebelisoa tse ling
Lisebelisoa tse latelang li teng bakeng sa tšehetso e eketsehileng.

• Control4 CORE letoto la thuso le tlhaiso-leseling: ctrl4.co/core
•  Snap One Tech Community le Knowledgebase: tech.control4.com
• Control4 Tšehetso ea Theknoloji: ctrl4.co/techsupport
• Control4 websebaka: www.tlhapelok.com

Pele view

• A Activity LED-The Activity LED e bontša ha molaoli a ntse a phallela molumo.
• B IR fensetere—moamoheli oa IR bakeng sa ho ithuta likhoutu tsa IR.
• C Tlhokomeliso LED-LED ena e bonts'a bofubelu bo tiileng, ebe e benya boputsoa nakong ea ts'ebetso ea boot.

Hlokomela:
Tlhokomeliso LED e benya lamunu nakong ea ts'ebetso ea ho khutlisa feme. Sheba "Reset to factory setting" tokomaneng ena.

• D Link LED-The LED e bontša hore molaoli o khethiloe morerong oa Control4 mme o buisana le Mookameli.
• E Power LED-LED e putsoa e bontša hore matla a AC a teng. Molaoli o bulela hang ka mor'a hore matla a sebelisoe ho eona.

Morao view

• Boema-kepe ba motlakase — sehokelo sa motlakase sa AC bakeng sa thapo ea motlakase ea IEC 60320-C5.
• B Khokahanyo le phetisetso— Hokela sesebediswa se le seng sa relay le sesebediswa sa sensor se le seng ho sehokelo sa block block. Lihokelo tsa relay ke COM, NC (hangata e koetsoe), le NO (hangata e butsoe). Mahokelo a sensor ea ho ikopanya ke +12, SIG (pontšo), le GND (fatše).
• C IR OUT/SERIAL—3.5 mm lijeke bakeng sa ho fihla ho li-emitters tse tšeletseng tsa IR kapa bakeng sa motsoako oa li-emitters tsa IR le lisebelisoa tsa serial. Boema-kepe ba 1, 2, le 3 bo ka hlophisoa bo ikemetseng bakeng sa taolo ea serial (bakeng sa ho laola ba amohelang kapa ba fetolang li-disk) kapa bakeng sa taolo ea IR. Sheba "Ho hokela likou tsa IR/serial ports" tokomaneng ena bakeng sa tlhaiso-leseling e batsi.
• D DIGITAL COAX IN-E lumella molumo ho arolelanoa marang-rang a lehae ho lisebelisoa tse ling tsa Control4.
• E AUDIO OUT 1/2 — E ntša molumo o arolelanoang ho tsoa ho lisebelisoa tse ling tsa Control4 kapa mehloling ea audio ea dijithale (mecha ea litaba ea lehae kapa lits'ebeletso tsa phallo ea dijithale).
• F DIGITAL COAX OUT—E ntša molumo o arolelanoang ho tsoa ho lisebelisoa tse ling tsa Control4 kapa mehloling ea audio ea dijithale (mecha ea litaba ea lehae kapa lits'ebeletso tsa ho hasanya tsa dijithale joalo).
• G USB—Kou e le 'ngoe bakeng sa drive ea kantle ea USB (joalo ka thupa ea USB e hlophisitsoeng ka FAT32). Sheba "Ho seta lisebelisoa tsa polokelo ea kantle" tokomaneng ena.
• H HDMI OUT—Boema-kepe ba HDMI ho bonts'a menyetla ea ho tsamaea. Hape ho na le molumo o tsoang ka HDMI.
• Konopo ea I ID le RESET — konopo ea ID e tlanya ho khetholla sesebelisoa ho Composer Pro. Konopo ea ID ho CORE 3 hape ke LED e bonts'ang maikutlo a bohlokoa nakong ea ho khutlisa feme. Pinhole ea RESET e sebelisetsoa ho tsosolosa kapa ho tsosolosa fektheri ea molaoli.
• ZWAVE - Sehokelo sa Antenna bakeng sa seea-le-moea sa Z-Wave.
• K ENET OUT—RJ-45 jack bakeng sa khokahanyo ea Ethernet out. E sebetsa e le sesebelisoa sa marang-rang sa 2-port se nang le jack ea ENET/POE+ IN.
• L ENET/POE+ IN—RJ-45 jack bakeng sa khokahano ea 10/100/1000BaseT Ethernet. Hape e ka matlafatsa molaoli ka PoE +.
• M ZIGBEE—Sehokelo sa Antenna bakeng sa seea-le-moea sa Zigbee.
  

Litaelo tsa ho kenya

Ho kenya controller:

1. Netefatsa hore marangrang a lapeng a teng pele o qala ho seta sistimi. Khokahano ea Ethernet ho netweke ea lehae ea hlokahala bakeng sa ho seta. Molaoli o hloka khokahano ea marang-rang ho sebelisa likarolo tsohle joalo ka ha li entsoe. Kamora tlhophiso ea pele, Ethernet (e khothalelitsoe) kapa Wi-Fi e ka sebelisoa ho hokela molaoli ho. web e thehiloeng mabolokelong a mecha ea litaba, buisana le lisebelisoa tse ling tsa IP ka lapeng, le
   fihlella lintlafatso tsa sistimi ea Control4.
2.  Kenya selaoli haufi le lisebelisoa tsa lehae tseo u hlokang ho li laola. Molaoli a ka patoa ka mor'a TV, a kenngoa leboteng, a kenngoa ka rack, kapa a behoa holim'a sethalafo. Bracket ea CORE 3 Wall-Mount e rekisoa ka thoko 'me e etselitsoe ho kenngoa habonolo ha molaoli oa CORE 3 ka morao ho TV kapa leboteng.
3. Hokela manakana ho likhokahanyo tsa manakana a ZIGBEE le ZWAVE.
4. Hokela molaoli ho netweke.
   • Ethernet - Ho hokela o sebelisa khokahano ea Ethernet, hokela thapo ea marang-rang koung ea RJ-45 ea molaoli (e ngotsoeng ENET/POE+ IN) le koung ea marang-rang.
     leboteng kapa pompong ya netweke.
   • Wi-Fi—Ho hokela o sebelisa Wi-Fi, qala ka ho hokela yuniti ho Ethernet, hokela adaptara ea Wi-Fi boema-kepeng ba USB, ebe u sebelisa Composer Pro System Manager ho lokisa yuniti bakeng sa Wi-Fi.
5. Hokela lisebelisoa tsa sistimi. Hokela IR le lisebelisoa tsa serial joalo ka ha ho hlalositsoe ho "Ho hokela likou tsa IR/serial ports" le "Ho theha li-emitters tsa IR."
6. Beha lisebelisoa life kapa life tsa polokelo ea kantle joalo ka ha ho hlalositsoe ho "Ho theha lisebelisoa tsa polokelo ea kantle" tokomaneng ena.
7.  Haeba o sebelisa matla a AC, hokela thapo ea motlakase boema-kepe ba motlakase oa molaoli ebe o kenya leboneng la motlakase.

Ho hokela likou tsa IR / likou tsa serial (ka boikhethelo)
Molaoli o fana ka likou tse tšeletseng tsa IR, 'me likou tsa 1, 2, le 3 li ka hlophisoa bocha ka boikemelo bakeng sa puisano ea serial. Haeba e sa sebelisoe bakeng sa serial, e ka sebelisoa bakeng sa IR.
Hokela sesebelisoa sa serial ho molaoli o sebelisa Control4 3.5 mm-to-DB9 Serial Cable (C4-CBL3.5-DB9B, e rekisoang ka thoko).

1.  Likou tsa serial li ts'ehetsa litheko tsa baud lipakeng tsa 1200 ho isa ho 115200 baud bakeng sa ho sa utloahaleng le ho lekana. Likou tsa serial ha li tšehetse taolo ea phallo ea hardware.
2.  Sheba sehlooho sa Knowledgebase #268 (ctrl4.co/contr-serial-pinout) bakeng sa litšoantšo tsa pinout.
3. Ho lokisa boema-kepe bakeng sa serial kapa IR, etsa likhokahano tse nepahetseng morerong oa hau u sebelisa Composer Pro. Sheba Composer Pro User Guide bakeng sa lintlha tse ling.

Hlokomela:
Likou tsa serial li ka hlophisoa e le tse otlolohileng kapa tsa lefeela ka Composer Pro. Li-ports tsa serial ka ho sa feleng li hlophisitsoe ka kotloloho 'me li ka fetoloa ho Composer ka ho khetha Null Modem Enabled (SERIAL 1, 2, kapa 3).
Ho theha li-emitters tsa IR
Seseteme ea hau e kanna ea ba le lihlahisoa tsa motho oa boraro tse laoloang ka litaelo tsa IR.

1.  Hokela e 'ngoe ea li-emitters tsa IR tse kenyellelitsoeng boema-kepeng ba IR OUT ho molaoli.
2. Beha pheletso ea lithupa holim'a moamoheli oa IR ho sebapali sa Blu-ray, TV, kapa sesebelisoa se seng se shebiloeng ho ntša matshwao a IR ho tloha ho molaoli ho ea sesebelisoa se shebiloeng.

Ho theha lisebelisoa tsa polokelo ea kantle (ka boikhethelo)
O ka boloka le ho fihlella mecha ea litaba ho tsoa sesebelisoa sa polokelo ea kantle, mohlalaample, hard drive ea netweke kapa sesebelisoa sa memori sa USB, ka ho hokela drive ea USB boema-kepeng ba USB le ho hlophisa kapa ho skena mecha ea litaba ho Composer Pro.
Hlokomela:
Re ts'ehetsa feela li-drive tsa USB tse tsamaeang ka ntle kapa lithupa tsa USB tsa boemo bo tiileng. Li-drive tsa USB tse itšebetsang ha li tšehetsoe.
Hlokomela:
Ha o sebelisa lisebelisoa tsa polokelo ea USB ho selaoli sa CORE 3, o ka sebelisa karohano e le 'ngoe feela e nang le boholo ba boholo ba 2 TB. Moeli ona o sebetsa le polokelong ea USB ho balaoli ba bang.
Lintlha tsa mokhanni oa Composer Pro
Sebelisa Auto Discovery le SDDP ho kenya mokhanni morerong oa Moqapi. Sheba Tataiso ea Mosebelisi ea Composer Pro (ctrl4.co/cpro-ug) ho fumana lintlha.
Ho seta le ho hlophisoa ha OvrC
OvrC e u fa taolo ea sesebelisoa se hole, litemoso tsa nako ea nnete, le taolo e hlakileng ea bareki, ho tsoa komporong ea hau kapa sesebelisoa sa mohala. Ho seta ke plug-and-play, ha ho hlokahale hore motho a fetisoe ka koung kapa aterese ea DDNS.
Ho kenya sesebelisoa sena akhaonteng ea hau ea OvrC:

1. Hokela selaoli sa CORE 3 Marang-rang.
2. E ea ho OvrC (www.ovrc.com) 'me u kene akhaonteng ea hau.
3. Kenya sesebelisoa (Aterese ea MAC le Tšebeletso Tag dinomoro tse hlokehang bakeng sa netefatso).

Lihokelo tsa li-terminal block tse ka kengoang
Bakeng sa likou tsa likhokahano le li-relay, CORE 3 e sebelisa likhokahano tsa li-terminal tse plugable tseo e leng likarolo tsa polasetiki tse ntshuwang tse notlelang mehala e le 'ngoe (e kenyellelitsoeng).
Ho hokela sesebediswa sebakeng sa thipa ya plugable:

1.  Kenya e 'ngoe ea lithapo tse hlokehang bakeng sa sesebediswa sa hao sebakeng se loketseng ho bula theminale e polakang eo o e boloketseng sesebediswa seo.
2.  Sebelisa screwdriver e nyane ea flat-blade ho tiisa screw le ho tiisa terata bolokong ba theminale.

ExampLe: Ho kenya sensor ea ho sisinyeha (sheba setšoantšo sa 3), hokela lithapo tsa eona ho menyetla e latelang ea likhokahano:

•  Kenyeletso ea matla ho +12V
•  Letšoao la tlhahiso ho SIG
•  Sehokelo sa fatše ho GND

Hlokomela:
Ho hokela lisebelisoa tsa ho koala sehokelo se omileng, joalo ka litloloko tsa mamati, hokela switch lipakeng tsa +12 (matla) le SIG (pontšo).
E hokela sebaka sa ho ikopanya
CORE 3 e fana ka boema-kepe bo le bong ba ho ikopanya le boema-kepe bo kenyellelitsoeng bo kenyellelitsoeng (+12, SIG, GRD). Bona exampka tlase ho ithuta ho hokahanya lisebelisoa tse fapaneng ho boema-kepe ba ho ikopanya.

• Kenya mohala ho sensor e hlokang matla (Motion sensor)
  
• Kopanya lebitso ho sensor e omileng ea ho ikopanya (sensor ea monyako)
  
• Kopanya lebitso ho sensor e tsamaeang ka ntle (sensor ea Driveway)
  

Ho hokela boema-kepe ba relay
CORE 3 e fana ka boema-kepe bo le bong bo fetisetsoang boema-kepeng bo kenyellelitsoeng bo kentsoeng. Bona exampka tlase ho ithuta hona joale ho hokahanya lisebelisoa tse fapaneng ho boema-kepe ba phepelo.
Tsamaisa mohala ho sesebelisoa sa relay e le 'ngoe, seo hangata se butsoeng (Fireplace)

• Hokela relay ho sesebelisoa sa li-relay tse peli (Blinds)
  
• Tlosa mohala ka matla a tsoang ho lebitso, hangata o koetsoe (Amplifier trigger)
  

Ho batle phoso

Khutlisa ho li-setting tsa feme
Tlhokomeliso! Ts'ebetso ea ho khutlisetsa feme e tla tlosa morero oa Moqapi.
Ho khutlisetsa molaoli setšoantšong sa kamehla sa feme:

1.  Kenya ntlha e le 'ngoe ea sekotwana sa pampiri lesobeng le lenyenyane le ka morao la molaoli le ngotsoeng RESET.
2. Tobetsa 'me u tšoare konopo ea RESET. Selaoli se seta bocha 'me konopo ea ID e fetohela ho bofubelu bo tiileng.
3.  Tšoara konopo ho fihlela ID e benya lamunu habeli. Sena se lokela ho nka metsotsoana e mehlano ho isa ho e supileng. Konopo ea ID e benya lamunu ha feme e khutlisa e ntse e sebetsa. Neng
   e felile, konopo ea ID ea tima 'me matla a sesebelisoa a potoloha lekhetlo le leng hape ho phethela tšebetso ea ho khutlisa feme.

Hlokomela:
Nakong ea ts'ebetso ea ho seta bocha, konopo ea ID e fana ka maikutlo a tšoanang le a Tlhokomeliso ea LED e ka pele ho molaoli.
Potoloho ea matla molaoli

1.  Tobetsa 'me u tšoare konopo ea ID metsotsoana e mehlano. Selaoli sea tima ebe se bulela hape.

Seta bocha li-setting tsa marang-rang
Ho seta botjha li-setting tsa netweke tsa controller hore e be tsa kamehla:

1. Tlosa motlakase ho molaoli.
2.  Ha u ntse u tobetsa le ho tšoara konopo ea ID ka morao ho molaoli, kenya matla ho molaoli.
3. Tšoara konopo ea ID ho fihlela konopo ea ID e fetoha lamunu e tiileng 'me Link le Power LED li le boputsoa bo tiileng, ebe hang-hang o lokolla konopo.

Hlokomela:
Nakong ea ts'ebetso ea ho seta bocha, konopo ea ID e fana ka maikutlo a tšoanang le a Tlhokomeliso ea LED e ka pele ho molaoli.
Lintlha tsa boemo ba LED

• E sa tsoa buloa
• Boot e qalile
  
• Boot e qalile
  
• Ho hlahloba ho seta botjha ha netweke
• Tsosoloso ea lifeme e ntse e tsoela pele
• E hokahane le Motsamaisi
  
• Ho bapala molumo
• Ho ntlafatsa
• Phoso ea ho ntlafatsa
• Ha ho aterese ea IP

Thuso e eketsehileng

Bakeng sa phetolelo ea morao-rao ea tokomane ena le ho view lisebelisoa tse ling, bula file ea URL ka tlase kapa o hlahlobe khoutu ea QR sesebelisoa se khonang view Li-PDF.

Litaba tsa Molao, Tiisetso, le Taolo/Tshireletso
Etela snapone.com/legal bakeng sa lintlha tse ling.

Litokomane / Lisebelisoa

	Control4 C4-CORE3 Core 3 Molaoli [pdf] Tlhophiso Tataiso C4-CORE3, Core 3, Controller, Core 3 Controller, C4-CORE3 Core 3 Controller
	Control4 C4-CORE3 Core-3 Controller [pdf] Tlhophiso Tataiso CORE3, 2AJAC-CORE3, 2AJACCORE3, C4-CORE3 Core-3 Controller, C4-CORE3, Core-3 Controller, Controller

Litšupiso

• Bukana ea Mosebelisi