Control4 C4-CORE3 Core 3 Controller chigadzirwa

Installation Guide
Inotsigirwa modhi

• C4-CORE3
  Kudzora4 CORE 3 Hub & Controller

Nhanganyaya

Yakagadzirirwa yakasarudzika yemakamuri akawanda evaraidzo chiitiko, iyo Control4® CORE 3 Controller ndiyo yakakwana fusion yepamusoro resolution audio uye yakangwara otomatiki kune ayo madiki kusvika epakati-saizi mapurojekiti. Iyo CORE 3 inopa yakanaka, intuitive, uye inopindura pa-screen mushandisi interface ine kugona kugadzira nekusimudzira ruzivo rwevaraidzo kune chero TV iri mumba. Iyo CORE 3 inogona kurongedza zvakasiyana-siyana zvevaraidzo zvishandiso zvinosanganisira Blu-ray vatambi, setiraiti kana tambo mabhokisi, mutambo consoles, maTV, uye chero chero chigadzirwa chine infrared (IR) kana serial (RS-232) control. Iyo zvakare inoratidzira IP kutonga kweApple TV, Roku, terevhizheni, AVRs, kana zvimwe network-yakabatana zvishandiso, pamwe neakangwara otomatiki control uchishandisa kubata, relay, uye yakachengeteka isina waya Zigbee uye Z-Wave kutonga kwemwenje, thermostats, smart kukiya, uye nezvimwe Zvekuvaraidza, iyo CORE 3 inosanganisira yakavakirwa-mukati mimhanzi sevha iyo inokutendera kuti uteerere kuraibhurari yako yemimhanzi, kuyerera kubva kwakasiyana-siyana inotungamira mimhanzi masevhisi, kana kubva kune yako AirPlay-inogonesa zvishandiso uchishandisa Control4 ShairBridge tekinoroji.
Zviri mubhokisi
Izvi zvinotevera zvinhu zvinosanganisirwa muCORE 3 controller bhokisi:

• CORE 3 controller
• AC simba tambo
•  IR emitters (3)
• Nzeve dzakakangwa (2)
• Rubber tsoka (2)
•  Antennas ekunze (2, 1 yeZigbee uye 1 yeZ-Wave)
•  Terminal block yekubata uye relay

Zvishandiso zviripo zvekutenga

• CORE 3 Chibhuraki cheWall-Mount (C4-CORE3-WM)
• Kudzora4 3-Meter Wireless Antenna Kit (C4-AK-3M
• Kudzora4 Dual-Band Wi-Fi USB Adapter (C4-USBWIFI KANA C4-USBWIFI-
• Kudzora4 3.5 mm kusvika DB9 Serial Cable (C4-CBL3.5-DB9B)

Zvinodiwa uye zvakatemwa

•  Iyo Ethernet kana Wi-Fi network inofanirwa kuiswa isati yatanga iyo CORE 3 controller yekuisa.
•  Iyo CORE 3 inoda OS 3.3 kana nyowani.
  Composer Pro software inodiwa kugadzirisa mudziyo uyu. Ona iyo Composer Pro User Guide (ctrl4.co/cpro-ug) kuti uwane ruzivo.

Yambiro
Chenjero!
Kuti uderedze njodzi yekuvhunduka kwemagetsi, usafumura iyi midziyo kunaya kana unyoro.

•  Mune yakawandisa-yazvino mamiriro pa USB, software inodzima zvabuda. Kana iyo yakasungirirwa USB mudziyo ichiita seyakabatidzwa, bvisa iyo USB mudziyo kubva kune controller.
  

Zvinotsanangurwa

Zvimwe zvekushandisa
Zvishandiso zvinotevera zviripo kune rumwe rubatsiro.

• Kudzora4 CORE akatevedzana rubatsiro uye ruzivo: ctrl4.co/core
•  Snap One Tech Nharaunda uye Knowledgebase: tech.control4.com
• Kudzora4 Tsigiro yehunyanzvi: ctrl4.co/techsupport
• Kudzora4 websaiti: www.pahanrde.com

Mberi view

• Chiitiko che LED-Iyo Basa re LED rinoratidza kana mutongi ari kutenderera odhiyo.
• B IR hwindo-IR inogamuchira yekudzidza IR makodhi.
• C Yambiro ye LED-Iyi LED inoratidza tsvuku yakasimba, uye inopenya yebhuruu panguva yebhoti maitiro.

Cherechedza:
Iyo Caution LED inopenya orenji panguva yekudzoreredza fekitori. Ona "Reset kune zvigadziriso zvefekitori" mugwaro iri.

• D Link LED-Iyo LED inoratidza kuti mutongi akaonekwa muchirongwa cheControl4 uye ari kutaurirana naDirector.
• E Simba LED-Iyo yebhuruu LED inoratidza kuti AC simba riripo. Mutongi anotendeuka pakarepo mushure mokunge simba rashandiswa pairi.

Back view

• A Power port-AC simba rekubatanidza yeIEC 60320-C5 tambo yemagetsi.
• B Bata uye relay- Batanidza imwe relay mudziyo uye imwe yekuona sensor mudziyo kune terminal block yekubatanidza. Relay yekubatanidza ndeye COM, NC (kazhinji yakavharwa), uye NO (kazhinji yakavhurika). Bata sensor yekubatanidza ndeye +12, SIG (chiratidzo), uye GND (pasi).
• C IR OUT/SERIAL—3.5 mm majeki emhepo anosvika matanhatu eIR emitters kana musanganiswa weIR emitters uye serial zvishandiso. Ports 1, 2, uye 3 inogona kugadzirwa yakazvimiririra kune serial control (yekutonga vanogamuchira kana disc shanduko) kana yeIR control. Ona "Kubatanidza iyo IR ports/serial ports" mugwaro rino kuti uwane rumwe ruzivo.
• D DIGITAL COAX IN-Inobvumira odhiyo kugovaniswa pamusoro penetiweki yemuno kune mamwe maControl4 zvishandiso.
• E AUDIO OUT 1/2-Odhiyo inobuda yakagovaniswa kubva kune mamwe madhivhari e4 kana kubva kudhijitari odhiyo masosi (yemuno midhiya kana dhijitari yekufambisa masevhisi).
• F DIGITAL COAX OUT-Odhiyo inobuda yakagovaniswa kubva kune mamwe madhivhisi e4 kana kubva kudhijitari maodhiyo masosi (yemuno midhiya kana yedhijitari yekufambisa masevhisi akadaro).
• G USB-Imwe chiteshi chekunze USB drive (senge USB tsvimbo yakarongwa FAT32). Ona "Kumisikidza midziyo yekuchengetedza kunze" mugwaro iri.
• H HDMI OUT-Chiteshi cheHDMI kuratidza mamenu ekufambisa. Zvakare odhiyo kunze kweHDMI.
• I ID bhatani uye RESET-ID bhatani rinodzvanywa kuratidza mudziyo muComposer Pro. Bhatani reID pane CORE 3 zvakare iLED inoratidza mhinduro inobatsira panguva yekudzoreredza fekitori. Iyo RESET pinhole inoshandiswa kugadzirisa zvakare kana fekitori kudzorera mutongi.
• ZWAVE-Antenna chinongedzo cheredhiyo yeZ-Wave.
• K ENET OUT—RJ-45 jack yeEthernet kunze yekubatanidza. Inoshanda se2-port network switch ine ENET/POE+ IN jack.
• L ENET/POE+ IN—RJ-45 jack ye10/100/1000BaseT Ethernet yekubatanidza. Zvakare inogona kugonesa controller nePoE +.
• M ZIGBEE—Antenna chinongedzo cheredhiyo yeZigbee.
  

Kuisa mirayiridzo

Kuisa controller:

1. Ita shuwa kuti network yepamba iripo usati watanga kuseta system. Kubatana kweEthernet kunetiweki yemuno kunodiwa pakuseta. Iyo controller inoda network yekubatanidza kuti ishandise ese maficha sekugadzirwa. Mushure mekutanga kumisikidzwa, Ethernet (inokurudzirwa) kana Wi-Fi inogona kushandiswa kubatanidza controller ku web yakavakirwa midhiya dhatabhesi, kutaurirana nemamwe maIP madivayiri mumba, uye
   kuwana Control4 system inogadziridza.
2.  Mount controller pedyo nemidziyo yemuno iwe yaunoda kudzora. Mutongi anogona kuvanzwa kuseri kweTV, akaiswa pamadziro, akaiswa musherufu, kana kuiswa pasherufu. Iyo CORE 3 Wall-Mount Bracket inotengeswa zvakasiyana uye yakagadzirirwa kuisirwa nyore kweiyo CORE 3 controller kuseri kweTV kana kumadziro.
3. Batanidza antenna kune ZIGBEE uye ZWAVE antenna connectors.
4. Batanidza controller kune network.
   • Ethernet-Kubatanidza uchishandisa chinongedzo cheEthernet, batanidza tambo yetiweki muRJ-45 port (yakanyorwa ENET/POE+ IN) uye muchiteshi chenetiweki.
     pamadziro kana pane network switch.
   • Wi-Fi—Kuti ubatanidze uchishandisa Wi-Fi, tanga wabatanidza yuniti kuEthernet, batanidza adapta yeWi-Fi kuchiteshi che USB, wobva washandisa Composer Pro System Manager kugadzirisa zvakare unit yeWi-Fi.
5. Batanidza system zvishandiso. Batanidza IR uye serial zvishandiso sezvakatsanangurwa mu "Kubatanidza iyo IR ports/serial ports" uye "Kumisikidza IR emitters."
6. Rongedza chero zvigadziriso zvekunze zvinotsanangurwa mu "Kumisikidza ekunze ekuchengetedza zvishandiso" mugwaro iri.
7.  Kana uchishandisa magetsi eAC, batanidza tambo yemagetsi pachiteshi chemagetsi chemutongi wobva wapinda mugetsi.

Kubatanidza iyo IR ports/serial ports (kusarudza)
Iyo controller inopa matanhatu IR ports, uye ports 1, 2, uye 3 inogona kugadziridzwa yakazvimiririra kune serial kutaurirana. Kana isina kushandiswa seriyori, inogona kushandiswa kune IR.
Batanidza serial mudziyo kune controller uchishandisa Control4 3.5 mm-to-DB9 Serial Cable (C4-CBL3.5-DB9B, inotengeswa zvakasiyana).

1.  Iyo serial ports inotsigira baud mitengo pakati pe1200 kusvika 115200 baud yekusanzwisisika uye kunyange parity. Iyo serial ports haitsigire hardware kuyerera kwekutonga.
2.  Ona Chinyorwa cheRuzivo #268 (ctrl4.co/contr-serial-pinout) yepinout diagrams.
3. Kuti ugadzirise chiteshi cheserial kana IR, ita kubatanidza kwakakodzera mupurojekiti yako uchishandisa Composer Pro. Ona iyo Composer Pro User Guide kuti uwane ruzivo.

Cherechedza:
Iyo serial ports inogona kugadzirwa seyakatwasuka-kuburikidza kana null neComposer Pro. Serial ports by default inogadziriswa yakatwasuka-kuburikidza uye inogona kuchinjwa muNyanzi nekusarudza Null Modem Inogoneswa (SERIAL 1, 2, kana 3).
Kugadzika IR emitters
Yako sisitimu inogona kunge iine yechitatu-bato zvigadzirwa zvinodzorwa kuburikidza neIR mirairo.

1.  Batanidza imwe yeakabatanidzwa IR emitters kune IR OUT port pane controller.
2. Isa chimuti-pa-emitter magumo pane IR inogamuchira paBlu-ray inoridza, TV, kana chimwe chinhu chinonangwa kuti ubudise masaini eIR kubva kune controller kuenda kune yakananga mudziyo.

Kumisikidza midziyo yekuchengetera yekunze (optional)
Iwe unogona kuchengeta uye kuwana midhiya kubva kune yekunze yekuchengetedza mudziyo, semuenzanisoample, network hard drive kana USB memory mudziyo, nekubatanidza USB drive kune USB port uye kugadzirisa kana kupenengura midhiya muComposer Pro.
Cherechedza:
Isu tinotsigira kunze chete magetsi ekunze e USB madhiraivha kana yakasimba state USB zvimiti. Madhiraivha e-self-powered USB haatsigirwe.
Cherechedza:
Paunenge uchishandisa USB midziyo yekuchengetera pane CORE 3 controller, unogona kushandisa imwe chete partition ine 2 TB yakakura saizi. Izvi zvinogumira zvinoshandawo kune iyo USB yekuchengetedza pane mamwe ma controller.
Composer Pro mutyairi ruzivo
Shandisa Auto Discovery uye SDDP kuwedzera mutyairi kuComposer project. Ona iyo Composer Pro User Guide (ctrl4.co/cpro-ug) kuti uwane ruzivo.
OvrC kuseta uye kumisikidza
OvrC inokupa kure kure maneja manejimendi, chaiyo-nguva zviziviso, uye intuitive mutengi manejimendi, kubva pakombuta yako kana nharembozha. Setup ndeye plug-uye-kutamba, isina chiteshi chekutumira kana DDNS kero inodiwa.
Kuwedzera mudziyo uyu kuaccount yako yeOvrC:

1. Batanidza CORE 3 controller kuInternet.
2. Enda kuOvrC (www.ovrc.com) uye pinda muakaundi yako.
3. Wedzera chishandiso (MAC kero uye Sevhisi Tag nhamba dzinodiwa kuti huchokwadi).

Pluggable terminal block connectors
Kune iyo yekubata uye yekudzosera zviteshi, iyo CORE 3 inoshandisa pluggable terminal block majoini ayo anobvisika epurasitiki zvikamu zvinokiya mune yega waya (inosanganisirwa).
Kubatanidza mudziyo kune pluggable terminal block:

1.  Isa imwe yewaya dzinodiwa pamudziyo wako mukuvhurika kwakakodzera mubhuroka rinogoneka remagetsi rawakachengetera mudziyo iwoyo.
2.  Shandisa diki-flat-blade screwdriver kusimbisa sikururu uye kuchengetedza waya mubharaki rekupedzisira.

Example: Kuti uwedzere sensor yekufamba (ona Mufananidzo 3), batanidza waya dzayo kune anotevera mazaru ekubata:

•  Simba rekuisa ku +12V
•  Chiratidzo chekuburitsa kuSIG
•  Ground connector kuGND

Cherechedza:
Kuti ubatanidze michina yekuvhara yakaoma yekuvhara, senge mabhero emusuwo, batanidza switch pakati pe +12 (simba) neSIG (chiratidzo).
Kubatanidza nzvimbo yekusangana
Iyo CORE 3 inopa imwe yekubata chiteshi pane inosanganisirwa pluggable terminal block (+12, SIG, GRD). Ona exampLes pazasi kudzidza nzira yekubatanidza midziyo yakasiyana-siyana kune yekuonana port.

• Waya iyo yekubata kune sensor inodawo simba (Motion sensor)
  
• Waya iyo yekubata kune yakaoma yekubata sensor (Door yekubata sensor)
  
• Waya iyo yekubata kune yekunze powered sensor (Driveway sensor)
  

Kubatanidza relay port
Iyo CORE 3 inopa imwe relay port pane inosanganisirwa pluggable terminal block. Ona exampzvishoma pazasi kuti udzidze ikozvino kubatanidza zvishandiso zvakasiyana kune relay port.
Waya iyo relay kune imwechete-relay mudziyo, inowanzovhurika (Fireplace)

• Waya relay kune maviri-relay mudziyo (Mapofu)
  
• Waya iyo relay ine simba kubva pakubata, kazhinji yakavharwa (Amplifier trigger)
  

Kugadzirisa matambudziko

Dzorera kune zvigadziriso zvefekitari
Chenjero! Iyo fekitori yekudzosera maitiro ichabvisa iyo Composer purojekiti.
Kudzoreredza controller kune iyo fekitori default mufananidzo:

1.  Isa imwe magumo epepa klip mugomba diki kuseri kwecontroller rakanyorwa kuti RESET.
2. Dzvanya uye bata bhatani reRESET. Iyo controller inogadzirisa uye bhatani reID rinochinja kuita tsvuku yakasimba.
3.  Bata bhatani kusvika ID yapenya kaviri orenji. Izvi zvinofanirwa kutora masekonzi mashanu kusvika manomwe. Bhatani reID rinopenya orenji apo fekitori yekudzorera iri kushanda. Rini
   yakakwana, bhatani reID rinodzima uye simba rekushandisa rinotenderera imwezve nguva yekupedzisa fekitori yekudzosera maitiro.

Cherechedza:
Munguva yekusetazve, bhatani reID rinopa mhinduro yakafanana neiyo Yekuchenjerera LED kumberi kwemutongi.
Simba kutenderera mutongi

1.  Dzvanya uye bata ID bhatani kwemasekonzi mashanu. Mudzori anodzima uye odzoka zvakare.

Gadzirisa zvigadziriso zvenetiweki
Kuti ugadzirise zvakare controller network marongero kune default:

1. Bvisa simba kune controller.
2.  Uchiri kudzvanya uye wakabata ID bhatani kuseri kwemutongi, simba pane controller.
3. Bata bhatani reID kusvika ID bhatani rachinja orenji yakasimba uye Iyo Link uye Simba maLED akasimba ebhuruu, wobva wasunungura bhatani ipapo ipapo.

Cherechedza:
Munguva yekusetazve, bhatani reID rinopa mhinduro yakafanana neiyo Yekuchenjerera LED kumberi kwemutongi.
LED mamiriro ruzivo

• Ichangobatidzwa
• Boot yakatanga
  
• Boot yakatanga
  
• Network reset check
• Kudzoreredzwa kwefekitari kuri kuitika
• Yakabatanidzwa naDirector
  
• Kuridza audio
• Updating
• Kuvandudza kukanganisa
• Hapana IP kero

Rubatsiro rwakawanda

Yeshanduro yazvino yegwaro iri uye ku view zvimwe zvinhu, vhura iyo URL pazasi kana tarisa iyo QR kodhi pane mudziyo unogona view PDFs.

Zvemutemo, Warranty, uye Regulatory/Safety information
Shanyira snapone.com/legal for details.

Zvinyorwa / Zvishandiso

	Kudzora4 C4-CORE3 Core 3 Mutongi [pdf] Installation Guide C4-CORE3, Core 3, Controller, Core 3 Controller, C4-CORE3 Core 3 Controller
	Kudzora4 C4-CORE3 Core-3 Mutongi [pdf] Installation Guide CORE3, 2AJAC-CORE3, 2AJACCORE3, C4-CORE3 Core-3 Controller, C4-CORE3, Core-3 Controller, Controller

References

• User Manual