Lihlahisoa tsa BWM BWMLS30H Vertical Horizontal Log Splitter

Tlhahisoleseding ya Sehlahiswa

The 30 Ton, 35 Ton & 40 Ton Vertical/Horizontal Log Splitter ke sesebelisoa se matla se etselitsoeng ho petsola patsi. E tla ka mefuta e meraro: BWMLS30H (30 Ton), BWMLS35H (35 Ton), le BWMLS40H (40 Ton). Log splitter e na le mehato ea polokeho ho netefatsa ts'ireletso ea mosebelisi nakong ea ts'ebetso.

Boitsebiso ba Tšireletseho

• Sekhahla sa log se lokela ho sebelisoa feela bakeng sa ho petsola patsi eseng bakeng sa merero e meng.
• Bana ha baa lokela ho sebelisa thepa.
• Basebelisi ba tlameha ho bala le ho utloisisa buka e felletseng ea ts'ebetso pele ba e kopanya le ho e sebelisa.
• Thepa ea motho ea itšireletsang, ho kopanyelletsa le likhalase kapa likhalase tsa tšireletso, lieta tse menoana ea tšepe, liatlana tse mo lekanang hantle, le li-ear plug kapa li-headphone tse thibang litsebe, li lokela ho roaloa nakong ea ts'ebetso.
• Qoba ho apara liaparo tse hlephileng kapa mabenyane a ka tšoaroang ke likarolo tse tsamaeang.
• Etsa bonnete ba hore litemoso tsohle tsa temoso tsa polokeho li khomaretsoe ebile lia baleha. Tlosa li-decal tse sieo kapa tse senyehileng.

Litaelo tsa Tšebeliso ea Sehlahisoa

Litaelo tsa Kopano

1. Hlakola setshelo (mehato ea 11-12 bukeng ea tataiso).
2. Kopanya tanka le enjene (mohato oa 13 bukeng ea tataiso).
3. Hokela tanka le mabili (mohato oa 14 bukeng ea tataiso).
4. Kopanya tanka le leleme (mohato oa 15 bukeng ea litaelo).
5. Kenya bracket ea beam (mohato oa 16 bukeng ea tataiso).
6. Hokela leballo le tanka (mohato oa 17 bukeng ea tataiso).
7. Hokela lithapo tsa haeteroliki (mohato oa 18 bukeng ea tataiso).
8. Kenya "log catcher" (mohato oa 19 bukeng ea litaelo).
9. Etsa tlhahlobo ea ho qetela ea ho kenya (mohato oa 19 bukeng ea tataiso).

Litaelo tsa Ts'ebetso

• Sheba bukana ea litlhahiso tse khethehileng tsa oli ea hydraulic le oli ea enjine.
• Latela litaelo tsa ho qala tse fanoeng (mohato oa 21 bukeng ea tataiso).
• Sekhahla sa log se ka sebetsoa maemong a mabeli a otlolohileng le a emeng (sheba mohato oa 22 bukeng ea tataiso).
• Boloka sesepa sa log ho latela litaelo tsa tlhokomelo (mohato oa 22 bukeng ea litaelo).
• Haeba ho hula ho hlokahala, latela litataiso tsa polokeho ea ho hula (mohato oa 23 bukeng ea tataiso).
• Ho arola logong ka sebaka se sekameng, latela litaelo tse fanoeng (mohato oa 23 bukeng ea tataiso).

Haeba u na le lipotso kapa matšoenyeho mabapi le ts'ebetso e sireletsehileng ea sesebelisoa sena, ka kopo ikopanye le rona ho 1300 454 585.

Boitsebiso ba Tšireletseho

• TLHOKOMELISO: Bala le ho utloisisa buka e felletseng ea ts'ebetso pele o kopanya kapa o sebelisa sehlahisoa sena! Ho hloleha ho utloisisa le ho latela litemoso, litemoso le litaelo tsa kopano le ts'ebetso ho ka baka kotsi e mpe kapa lefu.
• U SE KE UA lumella bana ho sebelisa thepa ena ka nako efe kapa efe. U SE KE UA lumella ba bang ba e-so bale le ho utloisisa bukana e felletseng ea ts'ebetso ho sebelisa sesebelisoa sena. Ho sebetsa ha thepa ea motlakase ho ka ba kotsi. Ke boikarabello ba mosebeletsi feela ho utloisisa kopano le ts'ebetso e sireletsehileng ea sehlahisoa sena.
• Re letsetse ho 1300 454 585 haeba u na le lipotso kapa matšoenyeho mabapi le ts'ebetso e sireletsehileng ea sesebelisoa sena.
• SEBELISA TŠEBELETSO: U se ke ua Sebelisa sekhahla sa log bakeng sa morero ofe kapa ofe ntle le ho petsola patsi, eo e etselitsoeng eona. Tšebeliso efe kapa efe e 'ngoe ha ea lumelloa 'me e ka baka kotsi e mpe kapa lefu.

TS'IRELETSO MAHALA

• Ha u sebelisa sesepa sena sa log, ho bohlokoa hore u apare lisebelisoa tsa ts'ireletso ho kenyelletsa likhalase kapa likhalase tsa tšireletso, lieta tsa tšepe le liatlana tse kenang ka thata (ha ho li-cuffs tse hlephileng kapa likhoele tse hulang). Kamehla u roale li-ear plugs kapa li-headphone tse thibang litsebe ho itšireletsa khahlanong le tahlehelo ea kutlo ha u sebelisa sesebelisoa sena sa log.
• U SE KE UA apara liaparo tse hlephileng kapa mabenyane a ka tšoaroang ka ho sisinyeha ha likarolo tse arohaneng tsa log. Boloka liaparo le moriri li le hole le likarolo tsohle tse tsamaeang ha u sebelisa sekhechana sena sa log.

TS'IRELETSO MAKOANE

• Etsa bonnete ba hore litemoso tsohle tsa temoso tsa polokeho li khomaretsoe 'me li maemong a balehang. Tlosa li-decal tse sieo kapa tse senyehileng. Letsetsa 1300 454 585 bakeng sa tse ling.

TŠIRELETSO KAKARETSO

• Ho hloleha ho latela litemoso, litemoso, ho bokelloa le litaelo tsa ts'ebetso ho Buka ea Ts'ebetso ho ka baka kotsi e mpe kapa lefu.

BALA PELE PELE OA SEBELISA

• U SE KE UA lumella bana ho sebelisa thepa ena ka nako efe kapa efe. Se ke oa lumella ba bang ba sa kang ba bala le ho utloisisa bukana e felletseng ea ts'ebetso ho sebelisa sesebelisoa sena.
• Boloka batho bohle le liphoofolo tse ruuoang lapeng bonyane ba limithara tse 10 hole le sebaka sa mosebetsi ha u sebelisa sekhechana sena sa log. Ke opareitara feela ea lokelang ho ba haufi le "log splitter" nakong ea ts'ebeliso.
• U SE KE UA sebelisa "log splitter" ha u le tlas'a tšusumetso ea joala, lithethefatsi kapa meriana.
• U SE KE UA lumella motho ea khathetseng kapa ea holofetseng ka tsela e 'ngoe kapa ea sa falimehang ka ho feletseng hore a sebelise mochine o arolang li-log.

LOKISETSO PUPA

• Lipheletso tse peli tsa logi li lokela ho khaoloa ka lisekoere ka hohle kamoo ho ka khonehang ho thibela log hore e se ke ea potoloha ho tsoa ka har'a sekhahla nakong ea ts'ebetso.
• Se ke oa arola lifate tse kholo ho feta 25" (635mm) ka bolelele.

MOSEBETSI SEBAKA

• U SE KE UA sebelisa sekhechana sa logong sebakeng se leqhoa, se metsi, se seretse kapa se thellang. Sebetsa FEELA sekhechana sa hau sa marang-rang sebakeng se bataletseng. Ho sebetsa letsoapong ho ka etsa hore sekhechana sa log se thellehe kapa litsupa li oe ho tloha thepa, e leng se ka bakang kotsi.
• U SE KE UA sebelisa sekhahla sa log sebakeng se koetsoeng. Mosi o tsoang enjeneng o na le carbon monoxide e ka bang kotsi kapa ea bolaea ha motho a hema.
• U SE KE UA suthisetsa sekhao sa logong sebakeng se maralla kapa se sa leka-lekaneng ntle le koloi e hulang kapa thuso e lekaneng.
• Sebelisa thaere e chock kapa block holim'a mabili ho thibela ho sisinyeha ha sekhahla sa log ha se ntse se sebetsa.
• Sebetsa sekhechana sa log motšehare kapa tlas'a khanya e ntle ea maiketsetso.
• Boloka sebaka sa mosebetsi se se na bohlasoa. Tlosa patsi e arohaneng ho pota-potile sekheo sa log hang ka mor'a ts'ebeliso e 'ngoe le e' ngoe ho qoba ho khoptjoa.

TS'EBETSO LESAKA LA LENGO

• Sebetsa "log splitter" ho tsoa sebakeng sa ts'ebetso joalo ka ha ho bonts'itsoe litšoantšong tse ka tlase. Opareitara e na le phihlello e bolokehileng le e sebetsang ka ho fetesisa ea valve ea taolo le borokho libakeng tsena.
• Ho hloleha ho sebelisa "log splitter" sebakeng sena ho ka baka kotsi e mpe kapa lefu.
• Etsa bonnete ba hore opareitara e tseba ho emisa le ho tlosa li-control pele e sebetsa.
• U se ke ua beha matsoho kapa maoto pakeng tsa log le wedge e arohaneng nakong ea ho ea pele kapa ho khutlela morao. Ho ne ho ka fella ka kotsi e tebileng kapa lefu.
• U SE KE UA Hlōla kapa ho hata holim'a sekhechana sa log nakong ea ts'ebetso.
• O SE KE oa fihla kapa oa inamela holim'a sekhechana sa log ho nka logi.
• U SE KE UA leka ho arola lifate tse peli holim'a tse ling.
• U SE KE UA leka ho tšela log e arohaneng.
• U SE KE UA leka ho kenya sekhechana sa log ha pheleu kapa wedge e ntse e tsamaea.
• Sebelisa letsoho la hau ho sebelisa lever ea taolo holim'a valve. U SE KE UA sebelisa leoto la hao, thapo kapa sesebelisoa leha e le sefe sa ho atolosa.
• O SE KE oa sisinya sekhechana sa log ha enjene e ntse e sebetsa.
• Le ka mohla u se ke ua siea thepa e sa lebelloa ha enjene e ntse e sebetsa. Koala enjene le haeba u tlohela ho arohana ha log ka nako e khuts'oane.
• Sebelisa letsoho la hau ho sebelisa lever ea taolo holim'a valve. U SE KE UA sebelisa leoto la hao, thapo kapa sesebelisoa leha e le sefe sa ho atolosa.

LITS'OANELO TS'OANELO

• U SE KE UA sebelisa sekhechana sa log ha se le maemong a mabe kapa se hloka ho lokisoa. Sheba khafetsa hore linate tsohle, liboutu, likurufu, li-hydraulic fittings le hose clamps li tiile.
• U SE KE UA fetola sekhahla sa log ka mokhoa ofe kapa ofe. Phetoho efe kapa efe e tla hlakola waranti mme e ka etsa hore sekhechana sa log se se bolokehe ho sebetsa. Etsa mekhoa eohle ea tlhokomelo e khothalletsoang pele u sebelisa sesepa sa log. Tlosa likarolo tsohle tse senyehileng kapa tse tsofetseng hang-hang.
• U SE KE UA tamper le enjene ho e tsamaisa ka lebelo le feteletseng. Lebelo le phahameng la enjene le behiloe esale pele ke moetsi 'me le ka har'a meeli ea polokeho. Sheba buka ea enjine ea Honda.
• Tlosa terata ea spark plug pele u etsa ts'ebeletso efe kapa efe kapa ho lokisa sekhechana sa log.
• Kamehla hlahloba boemo ba oli ea hydraulic le oli ea enjine pele o sebetsa.
• Likarolo tse nchafalitsoeng li tlameha ho kopana le litlhaloso tsa moetsi.

TS'IRELETSO HYDRAULIC

• Sistimi ea hydraulic ea splitter ea log e hloka tlhahlobo e hlokolosi hammoho le likarolo tsa mochini. Etsa bonnete ba hore u nkela li-hoses tsa hydraulic tse senyehileng, tsa kinked, tse phatlohileng kapa tse senyehileng kapa likarolo tsa haeteroliki.
• Hlahloba ho lutla ha mokelikeli oa haeteroliki ka ho fetisa sekhechana sa pampiri kapa khateboto ka tlase kapa sebakeng seo ho lutlang ho sona. U se ke ua hlahloba ho lutla ha metsi ka letsoho la hao. Mokelikeli o tsoang ka mokoting o monyenyane ka ho fetisisa, tlas'a khatello, o ka ba le matla a lekaneng ho phunyeletsa letlalong ho baka kotsi e tebileng kapa lefu.
• Batla thuso ea bongaka hang hang haeba u lemetse ka ho baleha mokelikeli oa haeteroliki. Tšoaetso e tebileng kapa maikutlo a ka hlaha haeba phekolo ea meriana e sa fanoe hang-hang.
• Fokotsa khatello eohle ka ho tima enjene le ho tsamaisa sets'oants'o sa taolo ea valve pele le pele haeba ho hlokahala ho theola kapa ho tlosa mochini ofe kapa ofe oa haeteroliki.
• U SE KE UA tlosa kepisi ho tanka ea haeteroliki kapa polokelong ea metsi ha log splitter e ntse e sebetsa. Tanka e ka ba le oli e chesang tlas'a khatello e ka bakang kotsi e mpe.
• U SE KE UA lokisa valve ea hydraulic. Sesepa sa ho thusa ka khatello holim'a sekhahla sa log se behiloe esale pele fekthering. Ke setsebi sa litšebeletso se tšoanelehang feela se lokelang ho etsa phetoho ena.

THIBELLO MOLLO

• U SE KE UA sebelisa sekhechana sa log haufi le lelakabe le bulehileng kapa tlhase. Oli ea Hydraulic le mafura li ka cha 'me li ka phatloha.
  U SE KE UA tlatsa tanka ea mafura ha enjene e chesa kapa e sebetsa. Lumella enjene hore e pholile pele u tlatsa mafura.
• U SE KE UA tsubella ha u ntse u sebetsa kapa u kenya peterole ka har'a sekhechana sa log. Mosi oa peterole o ka phatloha habonolo.
• Eketsa peterole sebakeng se hlakileng se se nang mosi oa mafura kapa mafura a qhalaneng. Sebelisa setšelo sa mafura se lumelletsoeng. Tlosa sekoahelo sa mafura ka mokhoa o sireletsehileng. Haeba mafura a qhalane, suthisa sekhechana sa log ho tloha moo ho tšolotsoeng 'me u qobe ho theha mohloli ofe kapa ofe oa ho hotetsa ho fihlela mafura a qhalaneng a fetoha mouoane.
• Boloka setima-mollo sa Sehlopha sa B se le letsohong ha u sebelisa sekoahelo sena sa logong libakeng tse omeletseng e le mokhoa oa ho itšireletsa khahlanong le litlhase tse fofang.
• Hlakola tanka ea mafura pele u e boloka ho qoba kotsi e ka bang teng ea mollo. Boloka mafura ka sejaneng se amohetsoeng, se tiisitsoeng ka thata. Boloka setshelo sebakeng se phodileng, se omileng.
• Tlosa valve e koalang peterole enjeneng ho ea sebakeng sa "OFF" pele o hula sekhechana sa log. Ho hlōleha ho etsa joalo ho ka fella ka ho tlala metsi.

BOHLOKOA HLOKO

• Sehlahisoa sena sa log se na le enjene e tukang ka hare, 'me ha sea lokela ho sebelisoa haufi kapa haufi le sebaka sefe kapa sefe se sa ntlafatsoang se koahetsoeng ke meru, se koahetsoeng ka borashe kapa se koahetsoeng ke joang ntle le haeba mochini oa motlakase oa enjene o na le kopano ea spark arrester melao e sebetsang ea lehae kapa ea naha (haeba efe kapa efe). Haeba ho sebelisoa spark arrester, e lokela ho bolokoa ka tatellano e sebetsang e sebetsang ke mosebeletsi.
• Le ka mohla u se ke ua sebelisa sekhechana sa log ka tlung kapa ka har'a sephutheloana kaha ho na le kotsi ea mosi oa mosi.

TS'IRELETSO

• Sheba melao eohle ea lehae le ea naha mabapi le ho hula, ho fana ka laesense le mabone pele u hula sekhechana sa hau sa log.
• Lekola pele o hula ho etsa bonnete ba hore sekhechana sa log se khomaretsoe ka mokhoa o nepahetseng le ka mokhoa o sireletsehileng koloing e hulang le hore liketane tsa tšireletso li tiisitsoe moo ho otlang teng kapa bumper ea koloi e nang le monyebe o lekaneng ho lumella ho reteleha. Ka linako tsohle sebelisa bolo ea Sehlopha sa I, 2” ka sekhahla sena sa log.
• U SE KE UA jara thepa kapa patsi holim'a sekoahelo sa log.
• U SE KE UA lumella mang kapa mang ho lula kapa ho palama holim'a sethala sa log.
• Hokela sekhechana sa log ho tloha koloing e hulang pele u se sebelisa.
• E-ba hlokolosi ha u tšehetsa le "log splitter" ho qoba jack-knifing. Lumella bolelele bo ekelitsoeng ba "log splitter" ha u thinya, u paka, u tšela mateano a litsela le maemong ohle a ho khanna.
• U SE KE UA Feta 70km/h ha u hula sekhechana sa hau sa log. Ho hula sekhahla sa log ka lebelo le fetang 70km/h ho ka baka tahlehelo ea taolo, tšenyo ea thepa, kotsi e mpe kapa lefu. Fetola lebelo la ho hula bakeng sa sebaka le maemo. E-ba hlokolosi haholo ha u hula sebakeng se makukuno, haholo-holo mateanong a terene.

LITLHAKU TSE HLOKAHALANG KOPANO

• Hamore
• Lisebelisoa tsa nko tsa nale
• Li-box cutters
• #2 Phillips screw driver
• 6mm hex senotlolo sa senotlolo
  8mm mokhanni
• 13mm wrench / socket wrench
• 17mm wrench / socket wrench
• 19mm wrench /socket wrench
• 22mm & 24mm wrenches / crescent wrench
• Wrench e sekoti e 28mm

TLHOKOMELO

• Ho li-splitter tse tlatsitsoeng esale pele, U SE KE U TLOSA li-caps ho tloha ho li-hydraulic hoses ho fihlela Mohato oa 7.

Che.	Karolo No.	Tlhaloso	Qty.
1	BWMLS101 BWMLS192	Kopano ea tanka (lithane tse 30) Kopano ea tanka (lithane tse 35/40)	1
2	BWMLS102 BWMLS193	Kopano ea Leleme le Maemo (Lithane tse 30) Kopano ea Leleme le Maemo (lithane tse 35/40)	1
3	BWMLS103 BWMLS194	Kopano ea Beam & cylinder (lithane tse 30) Kopano ea Beam & cylinder (lithane tse 35/40)	1
4	BWMLS104	Kopano ea mabili/taere, 4.80 x 8”	2

Che.	Karolo No.	Tlhaloso			Qty.
5	BWMLS105	Beam lock bracket			1
6	BWMLS106	Beam pivot bracket			1
7	BWMLS107	Kopano ea ho tšoasa lifate			1
8		Honda GP200 kapa GX200 Honda GX270 (lithane tse 35) Honda GX390 (lithane tse 40)	(30	thane)	1

Kopano ea Log Catcher

Che.	Karolo No.	Tlhaloso		Qty.
1	BWMLS108	Log	catcher grate	1
2	BWMLS109	Log	letlapa la tshehetso la motshwasi	2
3	BWMLS110	Log	catcher mount, tlase	2
4	BWMLS111	Log	catcher mount, holimo	2
5	BWMLS112	Hex	bolt, M10 x 30mm	8

Che.	Karolo No.	Tlhaloso				Qty.
6	BWMLS113	Sesepa sa ho notlela, M10				10
7	BWMLS114	Hex nut, M10				10
8	BWMLS115	Sesepa se bataletseng, M10				12
9	BWMLS116	Sekurufu sa konopo,	M10	x	30 limilimithara	2

Ho manolla Setshelo

Mohato oa 1.1

• Tlosa sekoahelo sa polasetiki holim'a crate.

Mohato oa 1.2

• Tlosa liboutu tse thibelang ho tloha lebaleng. Sebelisa 13mm wrench / socket wrench ho tlosa liboutu tse peli tsa hex tse sirelletsang leballo tlase tlase (ka ho le letona). Ka kopo elelloa hore liboutu tse peli tsa hex li fumaneha ka mahlakoreng a fapaneng.

Mohato oa 1.3

• Tlosa kopano ea beam le cylinder ho crate ka thuso ea mothusi. Phahamisa leballo le kopano ea silinda sebakeng sa eona se otlolohileng se eme se otlolohile holim'a letlapa la leoto la leballo.

Mohato oa 1.4

• Sebelisa wrench / socket wrench ea 13mm ho tlosa bolt e le 'ngoe ea hex e bolokang kopano ea tanka ka tlase ea crate (ka ho le letona).

Mohato oa 1.5

• Sebelisa 13mm wrench / socket wrench ho tlosa liboutu tse peli tsa hex tse sireletsang enjene ea Honda tlase tlase (ka ho le letona).

Mohato oa 1.6

• Tlosa tanka le kopano ea enjene ka kreiting.

Kopano ea Tanka le Enjene

Mohato oa 2.1

• Tlosa liboutu tsa enjene (5) ka tankeng.

Mohato oa 2.2

• Beha enjene (2) holim'a tanka.

Mohato oa 2.3

• Enjene e sireletsehileng holim'a tanka (1) libakeng tse 4 tse nang le hex bolt (5), washer e bataletseng (6) le hex nut e notlelang (7).

Mohato oa 2.4

• Hokela tšupu e monyang (3) ho pompa.

Mohato oa 2.5

• Tlamella tšupu ea mohala ho kopano ea pompo ka hose clamp (4).

Che.	Karolo No.	Tlhaloso	Qty.
1	BWMLS101 BWMLS192	Kopano ea tanka (lithane tse 30) Kopano ea tanka (lithane tse 35/40)	1
2		Honda GP200 kapa GX200 (lithane tse 30) Honda GX270 (lithane tse 35) Honda GX390 (40 tonne)	1
3	BWMLS117	Suction line tube	1
4	BWMLS118	Hose clamp, 15/16” ho ea ho 1-1/4”	2

Che.	Karolo No.	Tlhaloso		Qty.
5	BWMLS119	Hex bolt, M8 x 45, G8.8		4
6	BWMLS120	Sesepa se bataletseng, M8		8
7	BWMLS121	Ho notlela hex nut, M8 x 1.25,	G8.8	4
8	BWMLS122	Enjene ea rabara damper		4

Kopano ea Tanka le Mabili

Mohato oa 3.1

• Tlosa likoahelo tse lahlehang tsa spindle le likoahelo tse kolokileng mabili.

Mohato oa 3.2

• Kopanya lebili/thaere (2) holim'a seluloana moo kutu ea thaere e shebileng kantle.

Mohato oa 3.3

• Tsenya washer e sephara (3) holim'a sesebelisoa sa ho ohla.

Mohato oa 3.4

• Hlakola nate ea qhobosheane e slotted (4) holim'a seluloana. Nate e slothiloeng e lokela ho hokelloa ka sokete ea 28mm e lekaneng ho felisa papali ea mahala ea kopano ea mabili mme e se thata ho feta.
• Etsa bonnete ba hore mabili a ka potoloha ka bolokolohi. Nate ea qhobosheane e hloka ho ts'oaroa ho lumella ho kenngoa ha pini ea cotter (5).

Mohato oa 3.5

• Kenya pini ea cotter ka linate tsa qhobosheane le spindle. Bend pin e fella ho potoloha spindle ho tiisa boemo ba eona.

Mohato oa 3.6

• Kenya hub cap (6) u sebelisa sesebelisoa sa hub cap (7). Tlanya ka bonolo sesebelisoa sa hub cap ka hamore ho tsamaisa sekoaelo sa hub sebakeng sa sona.

Mohato oa 3.7

• Pheta Mehato ea 1 - 6 ho kenya lebili la bobeli.

Che.	Karolo No.	Tlhaloso	Qty.
1	BWMLS128 BWMLS195	Kopano ea tanka le enjene (lithane tse 30) Kopano ea tanka le enjene (lithane tse 35/40)	1
2	BWMLS104	Kopano ea mabili/taere, 4.80 x 8”	2
3	BWMLS123	Sesepa se bataletseng, 3/4 ”	2
4	BWMLS124	Castle nut, 3/16” 16, zinki e hlakileng	2

Che.	Karolo No.	Tlhaloso			Qty.
5	BWMLS125	Cotter pin, 1/8”	x	1-1/2”	2
6	BWMLS126	Hub cap			2
7	BWMLS127	Sesebelisoa sa Hub cap			1

Kopano ea Tanka le Leleme

Mohato oa 4.1
Hokela kopano ea leleme le litulo (2) tanka le kopano ea enjene (1) ka hex bolt (3), washer e bataletseng (4), washer ea senotlolo (5) le hex nut (6) libakeng tse peli. Tiisa ka mokhoa o sireletsehileng u sebelisa 19mm socket wrench.

Che.

Karolo No.

Tlhaloso

Qty.

Che.

Karolo No.

Tlhaloso

Qty.

1 BWMLS128 Tanka le kopano ea enjene (lithane tse 30) 1 2 BWMLS102 Kopano ea Leleme le Maemo (lithane tse 30) 1				5   6		BWMLS131   BWMLS132	Sesepa sa ho notlela, M12   Hex nut, M12 x 1.75, G8.8	2   2
	BWMLS193	Kopano ea lipuo le ho ema (35/40 tons)
3	BWMLS129	Hex bolt M12 x 1.75 x 110mm, G8.8	2		7	BWMLS133	Sekoti sa letsoho	1
4	BWMLS130	Sesepa se bataletseng, M12	4

Kopano ea Beam Bracket

Mohato oa 5.1

• Hokela borakete ea senotlolo sa leballo (2) ho kopano ea leballo le moqomo (1) e nang le hex bolt (4), washer e bataletseng (5), washer ea senotlolo (6) le hex nut (7) libakeng tse peli. Tiisa ka mokhoa o sireletsehileng u sebelisa 19mm socket wrench.

Mohato oa 5.2

• Hokela bracket ea pivot (3) ho kopano ea beam le cylinder (1) u sebelisa masoba a mane a tlase a nang le hex bolt (4), washer e bataletseng (5), washer ea senotlolo (6) le hex nut (7) libakeng tse 'ne. Tiisa ka mokhoa o sireletsehileng u sebelisa 19mm socket wrench.

Che.	Karolo No.	Tlhaloso	Qty.
1	BWMLS103 BWMLS194	Kopano ea Beam & cylinder (lithane tse 30) Kopano ea Beam & cylinder (lithane tse 35/40)	1
2	BWMLS134	Beam lock bracket	1
3	BWMLS135	Beam pivot bracket	1
4	BWMLS129	Hex bolt, M12 x 1.75 x 35mm, G8.8	6

Che.	Karolo No.	Tlhaloso		Qty.
5	BWMLS130	Sesepa se bataletseng, M12		6
6	BWMLS131	Sesepa sa ho notlela, M12		6
7	BWMLS132	Hex nut, M12 x 1.75,	G8.8	6

 Kopano ea Beam le Tanka

Mohato oa 6.1

• Fetolela setofo sa jeke se khomaretsoeng lehlakoreng la ho kopana ha leleme ho ea tlase sebakeng ka ho lokolla phini ebe u tiisa phini ea tokollo.

Mohato oa 6.2

• Tlosa sekotwana se bolokileng (2) ebe u otla pin (1) ho yuniti e kopaneng (ka tlase).

Mohato oa 6.3

• Butle-butle khutlisetsa yuniti e kopantsoeng ho fihlela ho kopano ea beam le cylinder. Lokisetsa borakete ea leleme ea yuniti e kopaneng ho borakete ea pivot ea kopano ea beam.

Mohato oa 6.4

• Hang ha li-bracket li se li hlophisitsoe, kenya pin ea hitch (1) ka har'a li-brackets ebe u kenya sekoahelo sa ho boloka (2) ka har'a pini ea hitch.
• No. Karolo ea No. Tlhaloso Qty.
  • 1 BWMLS136 Hitch pin 5/8” x 6-1/4” 1
• No. Karolo ea No. Tlhaloso Qty.
  • 2 BWMLS137 R-clip, 1/8”. E lumellana le 1/2" ho isa ho 3/4" 1

Hydraulic Line Connection

Mohato oa 7.1

• Tšoara hose ea hydraulic (1) le (2) ka holim'a boemo ba tanka ea hydraulic ho thibela ho tsoa ha mokelikeli le ho tlosa likheo tsa ho qetela.

Mohato oa 7.2

• Kenya tepi ea Teflon kapa sekontiri sa pipe holim'a likhoele tsa hose. Kenya lipheletsong tsa li-hose tse peli tsa haeteroliki (1) le (2) ho valve (joalokaha ho bontšitsoe ka botlalo setšoantšo se ka tlase). Tiisa ka mokhoa o sireletsehileng likhokahano tse loketseng u sebelisa 22mm le 24mm wrench.

Mohato oa 7.3

• Tlosa sekoahelo sa tanka 'me u kenye cap cap.

TLHOKOMELO

• Ho li-splitters tse tlatsitsoeng esale pele, tšoara li-hoses ka holimo ho boemo ba tanka ea hydraulic pele u tlosa li-end caps.

Che.	Karolo No.	Tlhaloso	Qty.
1	BWMLS138	Hose ea Hydraulic, 1/2" x 56"	1

Che.	Karolo No.	Tlhaloso	Qty.
2	BWMLS139	Hose ea Hydraulic, 1/2" x 38", khatello e phahameng	1

Ho kenya Log Catcher

Mohato oa 8.1

• Fetolela borokho le kopano ea cylinder fatše ho tloha sebakeng se otlolohileng 'me u notlele ka phini ea tokollo.

Mohato oa 8.2

• Kenya mochini o tšoarang lifate (1) o nang le liboutu tsa hex (2), washer e bataletseng (3), washer ea senotlolo (4), hex nut (5) le screw screw (6) libakeng tse peli. Tobetsa linate tsa hex ka mokhoa o sireletsehileng ka sekoahelo sa sokete sa 17mm 'me u tiise likonopo ka 6mm hex key wrench.

Che.	Karolo No.	Tlhaloso				Qty.
1	BWMLS107	Log	kopano ya motshwasi			1
2	BWMLS112	Hex	bolt M10 x 1.5 x	30limilimithara,	G8.8	2
3	BWMLS115	E bataletseng	Washer, M10			4

Che.	Karolo No.	Tlhaloso			Qty.
4	BWMLS113	Sesepa sa ho notlela, M10			4
5	BWMLS114	Hex nut, M10 x 1.5,	G8.8		4
6	BWMLS140	Sekurufu sa konopo, M10 x G8.8	1.5 x	30limilimithara,	2

Tlhahlobo ea ho Qetela ea Tlhophiso

Mohato oa 9.1
Lekola ho tiea ha lisebelisoa tsohle, linate le liboutu pele u tlatsa sekhechana sa log ka maro.

Litaelo tsa Ts'ebetso

• TLHOKOMELISO: Bala le ho utloisisa buka e felletseng ea ts'ebetso pele o kopanya kapa o sebelisa sehlahisoa sena! Ho hloleha ho utloisisa le ho latela litemoso, litemoso le litaelo tsa kopano le ts'ebetso ho ka baka kotsi e mpe kapa lefu.
• U SE KE UA lumella bana ho sebelisa thepa ena ka nako efe kapa efe. U SE KE UA lumella ba bang ba e-so bale le ho utloisisa bukana e felletseng ea ts'ebetso ho sebelisa sesebelisoa sena. Ho sebetsa ha thepa ea motlakase ho ka ba kotsi. Ke boikarabello ba mosebeletsi feela ho utloisisa kopano le ts'ebetso e sireletsehileng ea sehlahisoa sena.
• TLHOKOMELISO: Oli e tlameha ho kenngoa polokelong ea haeteroliki le enjeneng pele e qala kapa e sebetsa.

Mohato oa 1

• Ka kopo, eketsa hoo e ka bang 15/20 litres ea hydraulic fluid. Mokelikeli o setseng oa hydraulic o tla eketsoa ka mor'a hore silindara e tsamaee ka baesekele. Ho khothalletsoa oli ea hydraulic ea AW46. Sebelisa oli e hloekileng feela 'me u hlokomele ho thibela litšila hore li se ke tsa kena polokelong ea haeteroliki.

KHOTHATSO OLE ETSANE

• Sebelisa oli e 4 ea ho hlatsoa likoloi. SAE 10W30 e khothaletsoa bakeng sa tšebeliso e akaretsang. Sheba chate ea SAE Viscosity Grades bukeng ea buka ea mong'a enjine ea hau bakeng sa maemo a tloaelehileng a mocheso. Bokhoni ba oli ea enjene ke 600ml bakeng sa Honda GX200 (lithane tse 30), 1.1lts bakeng sa Honda GX270 (lithane tse 35) le 1.1lts bakeng sa Honda GX390 (lithane tse 40). Kamehla hlahloba boemo ba oli pele u qala enjene 'me u boloke boemo bo tletse.

Mohato oa 2

• Ka mor'a hore letamo la hydraulic le crankcase ea enjene li tlatsoe ka oli, qala enjene. Pompo ea hydraulic e iketsetsa eona. Ha enjene e ntse e sebetsa, tsamaisa leqhubu la hydraulic valve ho ea pele
  sejana sa leoto. Sena se tla etsa hore cylinder e atolohe le ho leleka moea. Ha silinda e atolositsoe ka botlalo, e hule. Pheta mokhoa ona ka makhetlo a 'maloa. Ho sisinyeha ho sa tsitsang ha cylinder ho bontša hore ho ntse ho e-na le moea tsamaisong. Kenya lilithara tse ka bang 3 ho isa ho tse 6 tsa mokelikeli oa haeteroliki. Hoo e ka bang lilithara tse 19 li tla ngolisoa ka holim'a mola o ka holimo oa ho tlatsa holim'a dip stick. Kakaretso ea matla a hydraulic system kaofela ke lilithara tse 30, 'me bonyane lilithara tse 19 tsa mokelikeli oa haeteroliki o sebetsa.
• HLOKOMELA: Haeba tanka e tletse ho feta tekano e tla ntša oli ho tsoa ho sekoaelo sa moea ha silindara e khutlisetsoa morao. Potoloha cylinder hape ho fihlela e e-na le lebelo le tsitsitseng le bontšang hore moea oohle o tsoile.

QALANG MELAO

• HLOKOMELA: Sheba bukana ea mong'a enjene bakeng sa tlhaiso-leseling e felletseng mabapi le ho qala, ho hlokomela le ho rarolla mathata.

1. Tsamaisa leqhubu la peterole sebakeng sa ON.
2. Ho qala enjene e batang, tsamaisa leqhubu la choke sebakeng sa CLOSE. Ho qala hape enjene e futhumetseng, tlohela leqhubu la choke sebakeng sa OPEN.
3. Tsamaisa throttle lever ho tloha sebakeng sa SLOW, hoo e ka bang 1/3 ea tsela ho ea sebakeng sa FAST.
4. Fetolela sesebelisoa sa enjene sebakeng sa ON.
5. Hula sets'oants'o sa ho qala ho fihlela u utloa ho hanyetsa, ebe u hula ka potlako. Khutlisetsa mokhoa oa ho qala ka bonolo.
6. Haeba leqhubu la choke le isitsoe sebakeng sa CLOSE ho qala enjene, butle-butle u e ise sebakeng sa HO BUA ha enjene e futhumala.
7. Ho emisa enjene nakong ea ts'ohanyetso, retelletsa switch ea enjene sebakeng sa OFF. Tlas'a maemo a tloaelehileng, tsamaisa throttle lever sebakeng sa SLOW ebe o fetola mochine oa enjene sebakeng sa OFF. Ebe u retelehela lever ea peterole sebakeng sa OFF.

Bakeng sa lintlha tse ling mabapi le ho qala le ho emisa enjene, sheba bukana ea litaelo ea mong'a enjene.

• TLHOKOMELISO: Tlosa belofo e koalang mafura sebakeng sa OFF pele u e hula ho qoba ho tlala enjene.
• HLOKOMELA: Lebelo le phahameng la lienjine ke ho hlophisoa ha feme ho 3600 RPM joalo ka lebelo le se nang mojaro. The throttle e lokela ho behoa ka lebelo le phahameng bakeng sa ho petsoha ha patsi ho fihlela matla a lipere a hlokehang bakeng sa pompo.
• TLHOKOMELISO: Review lintlha tsa polokeho tse amanang le ts'ebetso ea sekhechana sa log maqepheng a 3-6 a bukana ena. Etsa bonnete ba hore u na le lisebelisoa tsa ts'ireletso tse khothalelitsoeng tse hlalositsoeng ho.
• Litaelo tsa ho boloka ka har'a cannister ea matsoho e khomaretsoeng lelemeng la serope sa log kapa file sebakeng se bolokehileng bakeng sa ho sebelisoa nakong e tlang.
• HLOKOMELA: Bakeng sa ts'ebetso libakeng tse nang le meru, fumana spark arrestor bakeng sa tsamaiso ea ho qeta nako. Sheba buka ea ts'ebetso le tlhokomelo ea enjene 'me u hlahlobe setsi sa hau sa litšebeletso se lumelletsoeng. Sheba hape THIBISO EA MOLLO leqepheng la 8 la bukana ena.
• BOHLOKOA: Ho lelefatsa bophelo ba hydraulic cylinder qoba ho theola letlapa la wedge ho ea karolong ea leoto. Ho ipapisa le likhothaletso tsa ts'ireletso ea indasteri, wedge e emisa 1/2" ho tloha qetellong ea stroke.

1. Beha sekhahla sa li-log sebakeng se hlakileng, se lekaneng 'me u thibele mabili. Etsa bonnete ba hore boema-kepe ba ho hula tanka bo lula bo le ka lehlakoreng le ka tlase la sekhechana sa log.
2. Bakeng sa ts'ebetso e otlolohileng, beha logong holim'a leballo khahlanong le poleiti ea leoto. Etsa bonnete ba hore log e sireletsehile holim'a poleiti ea maoto le khahlanong le leballo. Ho petsola patsi sebakeng se otlolohileng, lokolla phini holim'a latch ea sefate e karolong e ka pele ea leballo. Ka hloko sekamisa leballo holimo ho fihlela poleiti ea leoto e lutse fatše ka ho lekana 'me sekhahla sa log se tsitsitse. Beha logong holim'a poleiti ea leoto khahlanong le sefate. Ha lebone le khutlisetsoa sebakeng se otlolohileng, etsa bonnete ba hore latch e koetsoe ka mokhoa o sireletsehileng.
3. Ha enjene e ntse e sebetsa, hatella sephethephethe sa valve e le hore cylinder e khanne lekhalo ka har'a log. Eketsa cylinder ho fihlela log e arohana kapa ho fihlela qetellong ea stroke ea eona. Haeba logi e sa arohana ka ho feletseng ka mor'a hore silinda e fihle qetellong ea katoloso ea eona, tlosa moqomo.

BOHLOKOA: Ho tlohela valve sebakeng sa ACTUATE qetellong ea leqeba ho ka senya pompo. Kamehla sebelisa tlhokomelo e eketsehileng ha u arola lifate tse nang le lipheletso tse sa lekanang.

TLHOKOMELO

1. Sheba litaelo tsa ts'ebetso le tlhokomelo ea moetsi oa enjene bakeng sa tlhokomelo le tlhokomelo ea enjene.
2. Kamehla hlahloba boemo ba oli ea polokelo ea hydraulic pele o sebetsa. Ho sebetsana le sesepa sa log ntle le phepelo ea oli e lekaneng ho tla baka tšenyo e kholo ho pompo.
3. Fetola sefe ea oli ka mor'a lihora tse 25 tsa pele tsa ts'ebetso. Ka mor'a hore u fetole sefe ea oli lihora tse ling le tse ling tse 100 kapa ka nako ea selemo, ho sa tsotellehe hore na ke efe e tlang pele.
4. Ho hula oli ea hydraulic, lokolla clamp hose e tsoang sebakeng se lekanang bokatlase ba tanka. E fumaneha ka ho le letona feela la sefe ea oli.
5. Haeba lekhalo le e-ba lerootho kapa le qhekelloa, le ka tlosoa 'me la leotsoa. Tlosa boutu e kopanyang wedge le silindara. Hose e tsoang valve e ka 'na ea hloka ho tlosoa. Phahamisa cylinder ka hloko ho lumella wedge ho thellela pele. Hona joale lesela le ka tlosoa 'me la leotsoa.
6. Hloekisa kepisi ea ho hema ka mor'a lihora tse 25 tsa ts'ebetso. E hloekise hangata ha e sebetsoa maemong a lerōle. Ho hloekisa, tlosa sekoahelo sa ho hema ka tankeng ebe u hlatsoa ka parafine kapa sesepa sa metsi ho tlosa litšila.
7. Sheba LITABATSO LE TLHOKOMELO leqepheng la 7 la bukana ena.
8. Likarolo tsohle tse ncha li tlameha ho kopana le litlhaloso tsa moetsi.

TS'ELISO

• Sekhahla sena sa log se na le lithaere tsa moea, sehlopha sa I coupler (e hlokehang ka bolo ea bophara ba 2”) le liketane tsa polokeho. Pele o hula, liketane tsa ts'ireletso li tlameha ho tiisetsoa moo ho qhoang teng kapa ho bumper ea koloi.
• Melao ea lehae e lokela ho hlahlojoa mabapi le ho fana ka laesense, mabone, ho hula, joalo-joalo. Tlosa valve e koalang peterole enjeneng ho ea moo HO TLOHANG pele o hula. Ho hlōleha ho etsa joalo ho ka fella ka ho tlala metsi.
• Se ke oa feta 70km/h ha u hula sekhechana sena sa logong. Sheba hape tšireletseho ea HO HUPA leqepheng la 8 la bukana ena.

KHOOA LIKOTSI

• HO HLOLA LE LEFU LE SEBELE ho ka etsahala haeba melao ea tšireletso ea ho hula e sa lateloe.
• REVIEW ho hula ditemoso tsa polokeho ka hara bukana ya koloi e hulang.
• KHAMANA KA POLOKO. Ela hloko bolelele bo ekelitsoeng ba "log splitter".
• LE KA mohla u se ke ua palama kapa ua tsamaisa thepa ka har'a sethala sa log.
• TIMA koloi pele u siea sekhechana sa log se sa lebelloa.
• Khetha sebaka se lekaneng ho sebelisa sekhechana sa log.
• Thibela mabili a arolang li-log ho thibela motsamao o sa reroang.
• LE KA mohla u se ke ua hula kapa ua sebelisa sesepa sena sa log ha u le tlas'a tšusumetso ea joala, lithethefatsi kapa meriana.

MOKHOA OA HO AOA LETOKO LE LEBAKA LE SLANTED

Likarolo tsa Pompo & Enjene

Che.	Karolo No.	Tlhaloso	Qty.
1		Honda GP200 kapa GX200 (lithane tse 30) Honda GX270 (lithane tse 35) Honda GX390 (40 tonne)	1
2	BWMLS141	Bar, key stock SQ 3/16” x 1-1/2”	1
3	BWMLS142	Sesepa sa ho notlela, M8	4
4	BWMLS143	Hex bolt, M8 x 10 x 25mm, G8.8	4
5	BWMLS144	Hex bolt, M8 x 1.25 x 30mm, G8.8	4
6	BWMLS121	Locking hex nut, M8 x 1.25, G8.8	4

Che.	Karolo No.	Tlhaloso	Qty.
7	BWMLS145 BWMLS196	Pompo, 13 GPM (30 tonne) Pompo, 17.5 GPM (35/40 tonne)	1
8	BWMLS146	Kopano ea Jaw coupler, 1/2” bore, L090	1
9	BWMLS147	Pompo mount, 92mm BC	1
10	BWMLS148	Mohlahare oa sekho, L090	1
11	BWMLS149	Kopano ea Jaw coupler, 3/4 "bore	1

Likarolo tsa Tanka

Che.	Karolo No.	Tlhaloso	Qty.
1	BWMLS150 BWMLS197	Tanka e nang le li-decals (lithane tse 30) Tanka e nang le li-decals (35/40 tonne)	1
2	BWMLS119	Hex bolt, M8 x 1.25 x 45mm, G8.8	4
3	BWMLS120	Sesepa se bataletseng, M8	8
4	BWMLS121	Locking hex nut, M8 x 1.25, G8.8	4
5	BWMLS151	Sesefa sa ho Suction	1
6	BWMLS152	E loketse, 3/4 NPT ho 1 "tube	1
7	BWMLS153	Ho kenya, M 3/4 NPT, M 3/4 NPT	1
8	BWMLS154	Sefa setsi, 3/4 NPT, 1-12 UNF	1
9	BWMLS155	Setsoe, M 3/4 NPT, F 1/2 NPT	1

Che.	Karolo No.	Tlhaloso	Qty.
10	BWMLS156	Sefahla sa oli ea Hydraulic	1
11	BWMLS157	Hose clamp, 15/16” ho ea ho 1-1/4”	2
12	BWMLS158	Suction line tube, terata e matlafalitsoe	1
13	BWMLS139	Hose ea Hydraulic, 1/2" x 38", khatello e phahameng	1
14	BWMLS138	Hose ea Hydraulic, 1/2" x 56"	1
15	BWMLS136	Hitch pin, 5/8” x 6-1/4”	1
16	BWMLS137	R-Clip, 1/8”, 1/2” ho isa ho 3/4”	1
17	BWMLS159	Kopano ea sekoahelo sa Vent	1

Likarolo tsa Leleme

Che.	Karolo No.	Tlhaloso		Qty.
1	BWMLS160	Leleme		1
2	BWMLS161	Kopano ea Ball coupler, 2”		1
3	BWMLS162	Ho ema ka leleme		1
4	BWMLS133	Sekoti sa letsoho		1
5	BWMLS163	Hex bolt, M6 x 1.0 x 20mm,	G8.8	3
6	BWMLS164	Washer ea fender, M6		3
7	BWMLS165	Shim, OD 75mm, ID 64mm	x 1 limilimithara	1

Che.	Karolo No.	Tlhaloso	Qty.
8	BWMLS166	selikalikoe sa ho boloka, kantle, 63mm shaft	1
9	BWMLS167	Hex bolt, M10 x 1.5 x 100mm, G8.8	1
10	BWMLS115	Sesepa se bataletseng, M10	4
11	BWMLS168	Locking hex nut, M10 x 1.5, G8.8	2
12	BWMLS169	Hex bolt, M10 x 1.5 x 120mm, G8.8	1
13	BWMLS170	Sesepa se bataletseng, 1/2 ”	2
14	BWMLS171	Tšireletso ketane	2

Likarolo tsa Beam

Che.	Karolo No.	Tlhaloso	Qty.
1	BWMLS172 BWMLS198	Beam (lithane tse 30) Beam (35/40 lithane)	1
2	BWMLS173   BWMLS199	Kopano ea cylinder, 4-1/2”, F 1/2 NPT (30 tonne) Kopano ea cylinder, 5”, F 1/2 NPT (35/40 tonne)	1
3	BWMLS174 BWMLS200	Wedge, 8.5" (30 ton) Wedge, 9" (35/40 lithane)	1
4	BWMLS175	Nnyo, 1/2 NPT, 1/2 NPT	1
5	BWMLS176 BWMLS201	Valofo, adj. detent, 3000 PSI (30 ton) Valve, adj. detent, 4000 PSI (35/40 tonne)	1
6	BWMLS177	Elbow, 1/2 NPT, 1/2 flare tube	2
7	BWMLS178	Tube, 1/2 OD, e tukang, 3/4-16” linate	1
8	BWMLS179 BWMLS202	Clevis pin assy, ​​1” OD, w/clips (30 ton) Clevis pin assy, ​​1” OD, w/clips (35/40 ton)	1

Che.	Karolo No.	Tlhaloso		Qty.
9	BWMLS180	Hex bolt, M12 x 1.75 x 75mm,	G8.8	1
10	BWMLS129	Hex bolt, M12 x 1.75 x 35mm,	G8.8	4
11	BWMLS130	Sesepa se bataletseng, M12		4
12	BWMLS131	Sesepa sa ho notlela, M12		5
13	BWMLS132	Hex nut, M12X1.75, G8.8		5
14	BWMLS181	Setsoe, M 3/4 NPT ho ea ho F1/2 NPT		1
15	BWMLS182	E loketse, 45°, M 3/4 NPT ho F1/2	NPT	1
16	BWMLS183	Stripper, RT		1
17	BWMLS184	Stripper, LT		1

Tiisetso

BOHLOKOA TSEBISO

• Rōna, moetsi, re na le tokelo ea ho fetola sehlahisoa le/kapa litlhaloso bukeng ena ntle le litsebiso.
• Bukana ena ke ea litšupiso tsa tlhahisoleseding feela 'me litšoantšo le litšoantšo tse bontšitsoeng mona ke tsa litšupiso feela.

TIISETSO LE TOKA TŠEBELETSO

• Ka kopo letsetsa sehlopha sa rona sa litšebeletso tsa bareki ho 1300 454 585 bakeng sa mathata leha e le afe a tiisetso kapa litokiso.
• Ngola lintlha tse ka tlase bakeng sa tšebeliso ea nako e tlang.
• Nomoro ea Mohlala:
• Nomoro ea serial:
• Letsatsi la theko:
• Sebaka sa ho reka:

Litlhaloso

Karolo No.	BWMLS30	BWMLS35	BWMLS40
Boholo ba matla a ho arola	Lithane tse 30	Lithane tse 35	Lithane tse 40
Enjene	Honda GP200 kapa GX200	Mofuta oa koloi oa Honda GX270	Mofuta oa koloi oa Honda GX390
Bolelele ba palo e kholo	25" (635mm)	25" (635mm)	25" (635mm)
Nako ea ho potoloha, tlase le morao	105 metsotsoana	115 metsotsoana	115 metsotsoana
Silinda	4-1/2" dia x 24" stroke	5" dia x 24" setorouku	5" dia x 24" setorouku
Pompo, tse peli stage	EA-13-GPM	EA-175-GPM	EA-175-GPM
Chelete, tšepe e tšoaroang ka mocheso	85" holimo	9" holimo	9" holimo
Beam	85" poleiti ea maoto	9" poleiti ea maoto	9" poleiti ea maoto
Matla a hydraulic	32 litres max	32 litres max	32 litres max
Boima ba sekepe	260kg	306kg	306kg
Seqhubu	Ho khutlisa ka boits'oaro ka detent e fetolehang
Mabili	DOT e amohetse lithaere tsa tsela tsa 16” OD
Banyalani	2" bolo e nang le liketane tsa polokeho
Tiisetso	Lilemo tse 2, tse fokolang

1. Linako tsa tonna le potoloho li ka fapana ho latela maemo a mochini le tikoloho.
2. Joalo ka ha e lekantsoe ke moetsi oa enjene
3. Bonyane bo boholo ba tšebetso ke lilithara tse 19 tsa mokelikeli oa haeteroliki

Mohala oa Bareki 1300 454 585.

Litokomane / Lisebelisoa

Lihlahisoa tsa BWM BWMLS30H Vertical Horizontal Log Splitter [pdf] Bukana ea Mosebelisi BWMLS30H Horizontal Horizontal Log Splitter, BWMLS30H, Vertical Horizontal Log Splitter, Ho Horizontal Log Splitter, Log Splitter

Litšupiso

• Bukana ea Mosebelisi