Lethathamo la lintlha tsa ACM8E
Fumana Balaoli ba Matla

Mefuta e kenyeletsa:
ACM8E - Litholoana tse Sirelelitsoeng ke Fuse tse robeli (8).
ACM8CBE - Liphetho tse Sirelelitsoeng tsa PTC tse robeli (8).

Tataiso ea ho Kena

Khampani ea ho Kenya: __________ Moemeli oa Litšebeletso Lebitso: ______________________
Aterese: ______________________________ Mohala #: ________________

Fetileview:

Altronix ACM8E le ACM8CBE li fetolela e le 'ngoe (1) 12 ho 24 volt AC* kapa kenyelletso ea DC hore e be tse robeli (8) tse laoloang ka boithaopo tse fused kapa PTC e sirelelitsoeng. Lisebelisoa tsena tsa matla li ka fetoloa hore e be mabitso a "C" a omileng (ACM8E feela). Lintho tse hlahisoang li sebelisoa ke sink e bulehileng ea pokello kapa ka tloaelo e bulehileng (NO) ho kenya letsoho le omileng ho tloha ho Access Control System, Card Reader, Keypad, Push Button, PIR, joalo-joalo. Liloko, Litokelo tsa Motlakase, Lits'oere tsa mamati a Magnetic, joalo-joalo. Lintho tse hlahisoang li tla sebetsa ka mekhoa ea Fail-Safe le/kapa Fail-Secure. Litsi li etselitsoe ho tsamaisoa ke mohloli o le mong o tloaelehileng oa matla o tla fana ka matla bakeng sa ts'ebetso ea boto le lisebelisoa tsa ho notlela, kapa mehloli e 'meli (2) e ikemetseng ka ho felletseng, e le' ngoe (1) e fana ka matla a ts'ebetso ea boto le e 'ngoe bakeng sa senotlolo / lisebelisoa. matla. FACP Interface e nolofalletsa Emergency Egress, Alarm Monitoring, kapa e ka sebelisoa ho kenya lisebelisoa tse ling tse thusang. Tšobotsi ea ho khaola alamo ea mollo e ka khethoa ka bonngoe bakeng sa liphetho leha e le life kapa kaofela tse robeli (8).
* Lisebelisoa tsa AC ha li hlahlojoe ke UL

Litlhaloso:

• 12 ho 24volt AC kapa ts'ebetso ea DC (ho beha ha ho hlokahale).
  (0.6A @ 12 volt, 0.3A @ 24 volt ts'ebeliso ea hona joale e nang le li-relay tsohle tse matlafalitsoeng).
• Likhetho tsa ho kenya motlakase: a) Motlakase o le mong (1) o tloaelehileng
  (matla a boto le senotlolo). b) Lisebelisoa tse peli (2) tsa motlakase tse arohaneng (e le 'ngoe (1) bakeng sa matla a boto le e le' ngoe (1) bakeng sa motlakase oa senotlolo / lisebelisoa).
• Tse Robedi (8) tsa Sistimi ya Taolo ya Phihlello di kenya tse kenyang:
  a) Tse robeli (8) tse atisang ho buloa (NO).
  b) Lits'ebetso tse robeli (8) tse bulehileng tsa pokello ea metsi.
  c) Kopanyo efe kapa efe ea tse kaholimo.
• Liphetho tse robeli (8) tse laoloang ka boikemelo:
  a) Lits'oants'o tse robeli (8) tsa Fail-Sireletsehile le/kapa Fail-Sireletseha liphetho tsa motlakase.
  b) E robeli (8) Foromo e omileng "C" 5A e lekantsoe liphetho tsa relay (ACM8E feela).
  c) Motsoako ofe kapa ofe oa tse ka holimo (ACM8E feela).
• Liphello tse robeli (8) tse thusang (tse sa fetoheng).
• Lintlha tse hlahisoang:
  • ACM8E: Li-Fuse li lekantsoe 3.5A ka 'ngoe.
  • ACM8CBE: PTCs ba rated 2.5A mong le e mong.
• Fuse e kholo e lekantsoe ho 10A.
  Hlokomela: Kakaretso ea tlhahiso ea hona joale e khethoa ke phepelo ea matla, e se ke ea feta palo e kholo ea 10A.
• Li-LED tse khubelu li bonts'a hore lihlahisoa li hlahisoa (li-relays li matlafalitsoe).
• Ho khaoha ha Alarm ea Mollo (ho latching kapa ho se lache) ho ka khethoa ka bonngoe bakeng sa liphetho tse robeli (8).
  Likhetho tsa ho kenya Alarm ea Mollo:
  a) Ka tloaelo bula (NO) kapa ka tloaelo ho koaloa (NC) omileng ho kenya letsoho.
  b) Kenyelletso ea ho khutlisetsa polarity ho tsoa ho potoloho ea matšoao a FACP.
• FACP output relay (foromo “C” contact rated @ 1A 28VDC, ha e hlahlojoe ke UL).
• LED e tala e bonts'a ha FACP e khaotsoe.
• Li-terminal blocks tse ka ntshuwang li thusa ho kenya habonolo.

Bophahamo ba Sebaka (H x W x D): 15.5″ x 12″ x 4.5″ (393.7mm x 304.8mm x 114.3mm).

ACM8E le ACM8CBE Series Configuration Chate:

Nomoro ea Mohlala oa Altronix	Liphetho tse Sirelelitsoeng tsa Fuse	PTC e Sirelelitsoeng Liphetho tse ka setang bocha	Ratings khumo	Sehlopha sa 2 se Ratoa Matla- A lekantsoeng	Lethathamo la Setsi	UL Lists le File Lipalo
ACM8E	✓	—	3.5A			UL File # BP6714 UL e thathamisitsoe bakeng sa Taolo ea Phihlelo Likarolo tsa Tsamaiso (UL 294**). "Thepa ea Matšoao" E hlahlobiloe ho CSA Standard C22.2 No.205-M1983
ACM8CBE	—	✓	2.5A	✓

*Ha e sebelisoa le Motlakase o Lekanyelitsoeng oa Motlakase oa Sehlopha sa 2.
* phihlello Maemo a Tshebetso ea Taolo: Tlhaselo e Senyang - I; Mamello - IV; Line Security - I; Matla a ho ema - I.

Litaelo tsa ho Kena:

1. Beha yuniti sebakeng se lakatsehang.
   Ka hloko review:

   Lethathamo la Boitsebiso ba Terminal	(leq. 4)	Setšoantšo se Tloaelehileng sa Kopo	(leq. 5)
   Lisebelisoa tsa LED	(leq. 4)	Lits'oants'o tsa ho hoka	(leq. 6)

2. Phepelo ea motlakase:
   Litsi li ka tsamaisoa ka matla a le mong (1) a tla fana ka matla bakeng sa ts'ebetso ea boto le lisebelisoa tsa ho notlela kapa lisebelisoa tse peli (2) tse arohaneng tsa motlakase, e le 'ngoe (1) ho fana ka matla bakeng sa ts'ebetso ea boto le e' ngoe ho fana ka matla. bakeng sa lisebelisoa tsa ho notlela le/kapa lisebelisoa tsa taolo ea phihlello.
   Hlokomela: Matla a kenyang e ka ba 12 ho isa ho 24 volts AC kapa DC (0.6A @ 12 volt, 0.3A @ 24 volt ts'ebeliso ea hona joale ka li-relay tsohle tse matlafalitsoeng).
   (a) Phepelo ea motlakase e le 'ngoe:
   Haeba yuniti le lisebelisoa tsa ho notlela li tla tsamaisoa ho sebelisoa motlakase o le mong, hokela tlhahiso (12 ho 24 volts AC kapa DC) ho liteminale tse tšoailoeng [ Power +].
   (b) Lisebelisoa tsa phepelo ea motlakase habeli (Setšoantšo sa 1c, leqepheng la 5):
   Ha ho hlokahala tšebeliso ea lisebelisoa tse peli tsa matla, li-jumpers J1 le J2 (tse ka letsohong le letšehali la li-terminals tsa matla / taolo) li tlameha ho khaoloa. Hokela matla a yuniti ho litheminale tse tšoailoeng [ Control +] 'me u hokele matla bakeng sa lisebelisoa tsa ho notlela litheminaleng tse tšoailoeng [ Power +].
   Hlokomela: Ha u sebelisa lisebelisoa tsa motlakase tsa DC polarity e tlameha ho hlokomeloa.
   Ha u sebelisa lisebelisoa tsa matla a AC polarity ha ea lokela ho hlokomeloa (setšoantšo sa 1d, pg. 5).
   Lisebelisoa tsa AC ha li hlahlojoe ke UL.
   Hlokomela: Bakeng sa ho latela melao ea UL, phepelo ea motlakase e tlameha ho ngolisoa ka UL bakeng sa Litsamaiso tsa Taolo ea Phihlelo le lisebelisoa.
3. Dikgetho tsa tlhahiso (Setšoantšo sa 1, leqepheng la 5):
   ACM8E e fana ka liphetho tse robeli (8) tse fetotsoeng, tse robeli (8) tse omeletseng tsa "C", kapa motsoako ofe kapa ofe oa matla a fetotsoeng le liphetho tsa "C", hammoho le lisebelisoa tse robeli (8) tse sa fetoheng tsa motlakase. ACM8CBE e fana ka liphetho tse robeli (8) tsa matla a fetotsoeng kapa tse robeli (8) tse sa fetoheng tsa matla a thusang.
   (a) Lits'oants'o tsa Matla a fetotsoeng:
   Hokela molaetsa o fosahetseng () oa sesebelisoa se tsamaisoang ho theminale e tšoailoeng [COM]. Bakeng sa ts'ebetso ea Fail-Safe, hokela molaetsa o nepahetseng (+) oa sesebelisoa se tsamaisoang ho theminale e tšoailoeng [NC]. Bakeng sa ts'ebetso ea Fail-Sireletsehile, hokela ho kenya letsoho (+) ho sesebelisoa se tsamaisoang ho terminal e tšoailoeng [NO].
   (b) Liphetho tsa Foromo “C” (ACM8E feela):
   Ha foromo ea "C" e lakatseha, fuse e tsamaisanang le eona (1-8) e tlameha ho tlosoa. Hokela negative () ea phepelo ea motlakase ka kotloloho ho sesebelisoa sa ho notlela. Hokela positi (+) ea phepelo ea motlakase ho theminale e tšoailoeng [C]. Bakeng sa ts'ebetso ea Fail-Safe, hokela positi (+) ea sesebelisoa se tsamaisoang ho theminale e tšoailoeng NC]. Bakeng sa ts'ebetso ea Fail-Sireletsehile hokela positi (+) ea sesebelisoa se tsamaisoang ho theminale e tšoailoeng [NO].
   (c) Lisebelisoa tsa Auxiliary Power (tse sa fetoloang): Hokela sesebediswa se setle (+) se tsamaisoang ho theminale e tšoailoeng [C] le negative () ea sesebelisoa se tsamaisoang ho theminale e tšoailoeng [COM]. Sephetho se ka sebelisoa ho fana ka matla bakeng sa babali ba likarete, li-keypad joalo-joalo.
4. Likhetho tsa ho kenya letsoho (Setšoantšo sa 1, leqepheng la 5):
   (a) Hangata Bula [NO] trigger ea ho kenya:
   Litlhahiso tsa 1-8 li kentsoe tšebetsong ka mokhoa o tloaelehileng oa ho kenya sekontiri se bulehileng kapa se bulehileng. Hokela lisebelisoa (libali tsa likarete, li-keypad, kopo ea ho tsoa likonopo, joalo-joalo) ho litheminale tse tšoailoeng [IN] le [GND].
   (b) Open Collector Sink inputs:
   Hokela setsi sa taolo ea phihlello sink e bulehileng ea pokello e nepahetseng (+) ho theminale e tšoailoeng [IN] le negative () ho theminale e tšoailoeng [GND].
5. Likhetho tsa Sehokelo sa Alarm ea Mollo (Setšoantšo sa 3 ho isa ho 7, leqepheng la 6):
   [NC] eo hangata e koetsoeng, eo hangata e bulang [NO] kapa keno e khutlisang polarity ho tsoa ho potoloho ea matšoao ea FACP e tla hlahisa likhetho tse khethiloeng. Ho nolofalletsa FACP Disconnect bakeng sa tlhahiso, tima switch e tsamaellanang [SW1-SW8] TIMA. Ho tima FACP hakoa bakeng sa tlhahiso, bulela switch e tsamaellanang le eona [SW1-SW8].
   (a) Ka tloaelo Bula [NO] ho kenya:
   Bakeng sa ho se latching hook-up bona Setšoantšo sa 4, leq. 6. Bakeng sa ho latching hook-up bona Setšoantšo sa 5, leq. 6.
   (b) Hangata ho koetsoe [NC]:
   Bakeng sa ho se latching hook-up bona Setšoantšo sa 6, leq. 6. Bakeng sa ho latching hook-up bona Setšoantšo sa 7, leq. 6.
   (c) Sehlomathisi se kenyang Potoloho ea Letšoao la FACP:
   Hokela positive (+) le negative () ho tloha ho FACP signaling circuit output ho litheminale tse tšoailoeng [+ INP ]. Hokela FACP EOL ho li-terminals tse tšoailoeng [+ RET ] (polarity e bontšitsoe ka boemo ba alamo). Jumper J3 e tlameha ho khaoloa (setšoantšo sa 3, leqephe la 6).
6. FACP Dry form "C" tlhahiso (Setšoantšo sa 1a, leqepheng la 5):
   Hokela sesebelisoa se lakatsehang se ka hlahisoang ke khokahanyo e ommeng ea yuniti ho liteminale tse tšoailoeng [NO] le [C] FACP bakeng sa tlhahiso e tloaelehileng e bulehileng kapa litheminale tse tšoailoeng [NC] le [C] FACP bakeng sa tlhahiso e tloaelehileng e koetsoeng.

Tlhahlobo ea LED:

LED	ON	TLOA
LED 1- LED 8 (Khubelu)	Li-relay tse hlahisoang li matlafalitsoe.	Li-relay li feletsoe ke matla.
Trg (Tala)	Ho kenya FACP (boemo ba alamo).	FACP e tloaelehileng (boemo boo e seng alamo).

Litafole tsa Boitsebiso ba Terminal:

Terminal Taba	Mosebetsi/Tlhaloso
Matla +	12VDC kapa 24VDC keno e tsoang botong ea phepelo ea motlakase.
Laola +	Li-terminals tsena li ka hokeloa ho phepelo ea motlakase e Lokisitsoeng ea UL e arohaneng ho fana ka matla a ts'ebetso a ikhethileng bakeng sa ACM8E/ACM8CBE (li-jumpers J1 le J2 li tlameha ho tlosoa).
MOTS'EOA SE KENYA 1 – SE KENYA 8 HO, GND	Ho tsoa ho lisebelisoa tse tloaelehileng tse bulehileng le / kapa tse bulehileng tsa moqokelli (kopo ea ho tsoa likonopo, ho tsoa li-pir, jj.).
TLHALOSO EA 1 – OUTPUT 8 NC, C, NO, COM	Li-volts tse 12 ho isa ho tse 24 tsa AC/DC li baka liphetho tse laoloang: Fail-Safe [NC positive 9-) & COM Negative (—)1, Fail-Sireletsehile [HA HO positi (+) & COM Negative (—)], Sehlahisoa se thusang [C positive 9-) & COM Negative (—)] (Ha u sebelisa polarity ea phepelo ea matla a AC ha ea lokela ho bonoa), NC, C, NO fetoha foromo "C" 5A/24VACNDC e lekantsoe liphetho tse omeletseng ha li-fuse li tlosoa (ACM8E). Mabitso a bonts'itsoeng a sa qalelle.
FACP INTERFACE T, + INNPUT -	Sehokelo sa Alarm ea Mollo se kenya letsoho ho tsoa ho FACP. Lisebelisoa tsa trigger li ka buloa ka tloaelo, hangata li koetsoe ho tloha ho FACP output circuit (Fig. 3 through 7, pgs. 6-7).
FACP INTERFACE NC, C, NO	Foromo "C" relay contact rated © 1A 28VDC bakeng sa tlaleho ea alamo. (Sephetho sena ha se so hlahlojoe ke UL).

Setšoantšo se Tloaelehileng sa Tšebeliso:

TLHOKOMELISO: Ho fokotsa kotsi ea mollo kapa ts'oaetso ea motlakase, u se ke ua pepesetsa yuniti ho pula kapa mongobo.
Fetola li-fuse (ACM8E feela) ka mofuta le litekanyetso tse tšoanang, 3.5A/250V.

Litšoantšo tsa Hook-Up:

Setšoantšo sa 2 Ho hokahana ha boikhethelo ho sebelisa lisebelisoa tse peli (2) tse ikhethileng tsa phepelo ea motlakase:

Setšoantšo sa 3 Polarity reversal input ho tloha FACP signaling circuit output (polarity e hlalosoa ka boemo ba alamo):

Setšoantšo sa 4 Ka tloaelo Bulehile: Non-Latching FACP kenya letsoho:

Setšoantšo sa 5 Ka tloaelo Open FACP Latching trigger input with reset (Sephetho sena ha se so hlahlojoe ke UL):

Setšoantšo sa 6 se Koalehile ka tloaelo: Ho kenya FACP e sa Lateng:

Setšoantšo sa 7 Hangata se Koetsoe: Latching FACP trigger input with reset (Sephetho sena ha se so hlahlojoe ke UL):

Litekanyo kampetsoeng:

15.5" x 12" x 4.5" (393.7mm x 304.8mm x 114.3mm)

Altronix ha e ikarabelle bakeng sa liphoso leha e le life tsa typographical.
140 58th Street, Brooklyn, New York 11220 USA | mohala: 718-567-8181 | fax: 718-567-9056
websebaka: www.altelengx.com | lengolo-tsoibila: info@altronix.com | Warranty ea bophelo bohle
IIACM8E/ACM8CBE L14V
Tataiso ea ho Kena ea ACM8E/ACM8CBE

Litokomane / Lisebelisoa

Altronix ACM8E Series Access Power Controllers [pdf] Tlhophiso Tataiso ACM8E, ACM8CBE, ACM8E Series Access Power Controllers, ACM8E Series, Access Power Controllers, Power Controllers, Controllers

Litšupiso

• Bukana ea Mosebelisi