Altronix ACM8E Series ACM8CBE Access Power Controllers
Fetileview
Altronix ACM8E le ACM8CBE li fetolela karolo e le 'ngoe (1) 12 ho ea ho 24 volt AC kapa DC hore e be tse robeli (8) tse laoloang ka boithaopo tse fused kapa PTC e sirelelitsoeng. Lisebelisoa tsena tsa matla li ka fetoloa hore e be mabitso a "C" a omileng (ACM8E feela). Lintho tse hlahisoang li sebelisoa ke sink e bulehileng ea pokello kapa ka tloaelo e bulehileng (NO) ho kenya letsoho le omileng ho tloha ho Access Control System, Card Reader, Keypad, Push Button, PIR, joalo-joalo. Liloko, Litokiso tsa Motlakase, Lits'oere tsa mamati a Magnetic, joalo-joalo. Lintho tse hlahisoang li tla sebetsa ka mekhoa ea Fail-Safe le/kapa Fail-Secure. Litsi li etselitsoe ho tsamaisoa ke mohloli o le mong o tloaelehileng oa matla o tla fana ka matla bakeng sa ts'ebetso ea boto le lisebelisoa tsa ho notlela, kapa mehloli e 'meli (2) e ikemetseng ka ho felletseng, e le' ngoe (1) e fana ka matla a ts'ebetso ea boto le e 'ngoe bakeng sa senotlolo / lisebelisoa. matla. FACP Interface e nolofalletsa Emergency Egress, Alarm Monitoring, kapa e ka sebelisoa ho kenya lisebelisoa tse ling tse thusang. Karolo ea ho khaola alamo ea mollo e ka khethoa ka bonngoe bakeng sa liphetho tse robeli kapa tse robeli (8).
Litlhaloso
12 ho 24volt AC kapa ts'ebetso ea DC (ho beha ha ho hlokahale). (0.6A @ 12 volt, 0.3A @ 24 volt tshebediso ya hona joale le li-relay tsohle tse matlafalitsoeng).
Likhetho tsa ho kenya motlakase:
-
- a) Kenyeletso e le 'ngoe (1) e tloaelehileng ea matla (boto le matla a senotlolo).
- b) Lisebelisoa tse peli (2) tsa motlakase tse arohaneng (e le 'ngoe (1) bakeng sa matla a boto le e le' ngoe (1) bakeng sa motlakase oa senotlolo / lisebelisoa).
- • Tse Robedi (8) tsa Sistimi ya Taolo ya Phihlello di thaisa:
- a) Tse robeli (8) tse atisang ho buloa (NO).
- b) Lits'ebetso tse robeli (8) tse bulehileng tsa pokello ea metsi.
- c) Kopanyo efe kapa efe ea tse kaholimo.
- Liphetho tse robeli (8) tse laoloang ka boikemelo:
- a) Lits'oants'o tse robeli (8) tsa Fail-Sireletsehile le/kapa Fail-Sireletseha liphetho tsa motlakase.
- b) E robeli (8) Foromo e omileng "C" 5A e lekantsoe liphetho tsa relay (ACM8E feela).
- c) Motsoako ofe kapa ofe oa tse ka holimo (ACM8E feela).
- Liphello tse robeli (8) tse thusang (tse sa fetoheng).
Lintlha tsa tlhahiso:
-
- ACM8E: Li-Fuse li lekantsoe 3.5A ka 'ngoe.
- ACM8CBE: PTCs ba rated 2.5A mong le e mong.
- Fuse e kholo e lekantsoe ho 10A.
Hlokomela: Kakaretso ea tlhahiso ea hona joale e khethoa ke phepelo ea matla, e se ke ea feta palo e kholo ea 10A.
-
- Li-LED tse khubelu li bonts'a hore lihlahisoa li hlahisoa (li-relays li matlafalitsoe).
- Ho khaoha ha Alarm ea Mollo (ho latching kapa ho se lache) ho ka khethoa ka bonngoe bakeng sa liphetho tse robeli (8). Likhetho tsa ho kenya Alarm ea Mollo:
- a) Ka tloaelo bula (NO) kapa ka tloaelo ho koaloa (NC) omileng ho kenya letsoho.
- b) Kenyelletso ea ho khutlisetsa polarity ho tsoa ho potoloho ea matšoao a FACP.
- FACP output relay (foromo “C” contact rated @ 1A 28VDC, ha e hlahlojoe ke UL).
- LED e tala e bonts'a ha FACP e khaotsoe.
- Li-terminal blocks tse ka ntshuwang li thusa ho kenya habonolo.
Bophahamo ba Sebaka (H x W x D): 15.5" x 12" x 4.5" (393.7mm x 304.8mm x 114.3mm).
ACM8E le ACM8CBE Series Configuration Chate
- Ha e sebelisoa le Class 2 Reted Power-Limited power supply.
- Maemo a Ts'ebetso ea Taolo ea Phihlello: Tlhaselo e Senyang - I; Mamello - IV; Line Security - I; Matla a ho ema - I.
Litaelo tsa ho Kena:
- Beha yuniti sebakeng se lakatsehang.
Ka hloko review
- Tafole ea Boitsebiso ea Terminal (leq. 4) Sets'oants'o se Tloaelehileng sa Tšebeliso (leq. 5)
- Tlhatlhobo ea LED (leq. 4) Litšoantšo tsa Hook-up (leq. 6)
Kenyelletso ea phepelo ea motlakase
Litsi li ka tsamaisoa ka matla a le mong (1) a tla fana ka matla bakeng sa ts'ebetso ea boto le lisebelisoa tsa ho notlela kapa lisebelisoa tse peli (2) tse arohaneng tsa motlakase, e le 'ngoe (1) ho fana ka matla bakeng sa ts'ebetso ea boto le e' ngoe ho fana ka matla. bakeng sa lisebelisoa tsa ho notlela le/kapa lisebelisoa tsa taolo ea phihlello.
Hlokomela: Matla a kenyang e ka ba 12 ho isa ho 24 volts AC kapa DC (0.6A @ 12 volt, 0.3A @ 24 volt ts'ebeliso ea hona joale ka li-relay tsohle tse matlafalitsoeng).
Phepelo ea motlakase e le 'ngoe
Haeba yuniti le lisebelisoa tsa ho notlela li lokela ho tsamaisoa ka matla a le mong, kopanya tlhahiso
- (12 ho 24 volts AC kapa DC) ho liteminale tse tšoailoeng [- Matla +].
Lisebelisoa tse peli tsa phepelo ea motlakase (setšoantšo sa 1c, leqephe la 5)
Ha ho hlokahala tšebeliso ea lisebelisoa tse peli tsa matla, li-jumpers J1 le J2 (tse ka letsohong le letšehali la li-terminals tsa taolo ea matla) li tlameha ho khaoloa. Hokela matla a yuniti ho liteminale tse tšoailoeng [- Control +] 'me u hokele matla bakeng sa lisebelisoa tsa ho notlela lienteng tse tšoailoeng [- Matla +].
Hlokomela: Ha u sebelisa lisebelisoa tsa motlakase tsa DC polarity e tlameha ho hlokomeloa. Ha u sebelisa lisebelisoa tsa matla a AC polarity ha ea lokela ho hlokomeloa (setšoantšo sa 1d, pg. 5). Bakeng sa ho latela melao ea UL, phepelo ea motlakase e tlameha ho ngolisoa ka UL bakeng sa Litsamaiso tsa Taolo ea Phihlelo le lisebelisoa.
Likhetho tsa tlhahiso (setšoantšo sa 1, leqephe la 5):
ACM8E e fana ka liphetho tse robeli (8) tse fetotsoeng, tse robeli (8) tse omeletseng tsa "C", kapa motsoako ofe kapa ofe oa matla a fetotsoeng le liphetho tsa "C", hammoho le lisebelisoa tse robeli (8) tse sa fetoheng tsa motlakase. ACM8CBE e fana ka liphetho tse robeli (8) tsa matla a fetotsoeng kapa tse robeli (8) tse sa fetoheng tsa matla a thusang.
Fetola Liphetho tsa Matla
Hokela molaetsa o fosahetseng (–) oa sesebelisoa se tsamaisoang ho terminal e tšoailoeng [COM]. Bakeng sa ts'ebetso ea Fail-Safe, hokela molaetsa o nepahetseng (+) oa sesebelisoa se tsamaisoang ho terminal e tšoailoeng [NC]. Bakeng sa ts'ebetso ea Fail-Sireletsehile, hokela ho kenya letsoho (+) ho sesebelisoa se tsamaisoang ho terminal e tšoailoeng [NO].
Liphetho tsa Foromo ea "C" (ACM8E feela)
Ha foromo ea "C" e lakatseha, fuse e tsamaisanang le eona (1-8) e tlameha ho tlosoa. Hokela negative (–) ea phepelo ea motlakase ka kotloloho ho sesebelisoa sa ho notlela. Hokela positi (+) ea phepelo ea motlakase ho theminale e tšoailoeng [C]. Bakeng sa ts'ebetso ea Fail-Safe, hokela positi (+) ea sesebelisoa se tsamaisoang ho theminale e tšoailoeng NC]. Bakeng sa ts'ebetso ea Fail-Sireletsehile hokela positi (+) ea sesebelisoa se tsamaisoang ho theminale e tšoailoeng [NO].
Lisebelisoa tsa Auxiliary Power (tse sa fetoloang)
Hokela sesebediswa se nepahetseng (+) se sebediswang ho theminale e ngotsweng [C] le negative (–) ya sesebediswa se tsamaisoang ho theminale e ngotsweng [COM]. Sephetho se ka sebelisoa ho fana ka matla bakeng sa babali ba likarete, li-keypad joalo-joalo.
Likhetho tsa ho kenya letsoho (setšoantšo sa 1, leqephe la 5):
- (a) Hangata Bula [NO] trigger ea ho kenya:
Litlhahiso tsa 1-8 li kentsoe tšebetsong ka mokhoa o tloaelehileng oa ho kenya sekontiri se bulehileng kapa se bulehileng. Hokela lisebelisoa (libali tsa likarete, li-keypad, kopo ea ho tsoa likonopo, joalo-joalo) ho litheminale tse tšoailoeng [IN] le [GND].
Bula lisebelisoa tsa Sink ea Collector
Hokela setsi sa taolo ea phihlello se bulehileng se bokellang positive (+) ho theminale e tšoailoeng [IN] le negative (–) ho theminale e tšoailoeng [GND].
Likhetho tsa Sehokelo sa Alarm ea Mollo (Figs. 3 through 7, p. 6)
[NC] eo hangata e koetsoeng, eo hangata e bulang [NO] kapa keno e khutlisang polarity ho tsoa ho potoloho ea matšoao ea FACP e tla hlahisa likhetho tse khethiloeng. Ho nolofalletsa FACP Disconnect bakeng sa tlhahiso, tima switch e tsamaellanang [SW1-SW8] TIMA. Ho tima FACP hakoa bakeng sa tlhahiso, bulela switch e tsamaellanang le eona [SW1-SW8].
- Ka tloaelo Bula [NO] ho kenya
- Bakeng sa ho se latching hook-up bona Setšoantšo sa 4, leq. 6. Bakeng sa ho latching hook-up bona Setšoantšo sa 5, leq. 6.
- (b) Hangata ho koetsoe [NC]:
- Bakeng sa ho se latching hook-up bona Setšoantšo sa 6, leq. 6. Bakeng sa ho latching hook-up bona Setšoantšo sa 7, leq. 6.
- (c) Sehlomathisi se kenyang Potoloho ea Letšoao la FACP:
- Hokela positive (+) le negative (–) ho tloha ho FACP signaling circuit output ho litheminale tse tšoailoeng [+ INP –]. Hokela FACP EOL ho li-terminals tse tšoailoeng [+ RET –] (polarity e hlalositsoe boemong ba alamo). Jumper J3 e tlameha ho khaoloa (setšoantšo sa 3, leqephe la 6).
FACP Dry form "C" tlhahiso (Setšoantšo sa 1a, leqephe la 5)
Hokela sesebelisoa se lakatsehang se ka hlahisoang ke khokahanyo e ommeng ea yuniti ho liteminale tse tšoailoeng [NO] le [C] FACP bakeng sa tlhahiso e tloaelehileng e bulehileng kapa litheminale tse tšoailoeng [NC] le [C] FACP bakeng sa tlhahiso e tloaelehileng e koetsoeng.
Lisebelisoa tsa LED
| LED | ON | TLOA |
| LED 1- LED 8 (Khubelu) | Li-relay tse hlahisoang li matlafalitsoe. | Li-relay li feletsoe ke matla. |
| Trg (Tala) | Ho kenya FACP (boemo ba alamo). | FACP e tloaelehileng (boemo boo e seng alamo). |
Litafole tsa Boitsebiso ba Terminal
| Terminal Taba | Mosebetsi/Tlhaloso |
| – Matla + | 12VDC kapa 24VDC keno e tsoang botong ea phepelo ea motlakase. |
| – Taolo + | Li-terminals tsena li ka hokeloa ho phepelo ea motlakase e thathamisitsoeng ka thoko ho UL ho fana ka matla a ts'ebetso a ikhethileng bakeng sa ACM8E/ACM8CBE (li-jumpers J1 le J2 li tlameha ho tlosoa). |
| MOTS'EOA
SE KENYA 1 – SE KENYA 8 HO, GND |
Ho tsoa ho lisebelisoa tse tloaelehileng tse bulehileng le / kapa tse bulehileng tsa moqokelli (kopo ea ho tsoa likonopo, ho tsoa li-pir, jj.). |
|
TLHALOSO EA 1 – OUTPUT 8 NC, C, NO, COM |
Li-volts tse 12 ho isa ho tse 24 tsa AC/DC li baka liphetho tse laoloang:
Fail-Safe [NC positive (+) & COM Negative (–)], Fail-Sireletsehile [HA HO positi (+) & COM Negative (–)], Sephetho sa tlatsetso [C positive (+) & COM Negative (-)] (Ha u sebelisa polarity ea matla a AC ha ea lokela ho bonoa), NC, C, NO fetoha foromo "C" 5A / 24VAC / VDC e lekanyelitse liphello tse omeletseng ha li-fuse li tlosoa (ACM8E). Mabitso a bonts'itsoeng a sa qalelle. |
| FACP INTERFACE T, + INNPUT – | Sehokelo sa Alarm ea Mollo se kenya letsoho ho tsoa ho FACP. Lisebelisoa tsa trigger li ka buloa ka tloaelo, hangata li koaloa ho tsoa ho potoloho ea FACP (Setšoantšo sa 3 ho isa ho 7, maqephe 6-7). |
| FACP INTERFACE NC, C, NO | Foromo "C" relay contact rated @ 1A 28VDC bakeng sa tlaleho ea alamo. (Sephetho sena ha se so hlahlojoe ke UL). |
Setšoantšo se Tloaelehileng sa Kopo
TLHOKOMELISO: Ho fokotsa kotsi ea mollo kapa ts'oaetso ea motlakase, u se ke ua pepesetsa yuniti ho pula kapa mongobo. Fetola li-fuse (ACM8E feela) ka mofuta le litekanyetso tse tšoanang, 3.5A/250V.
Hook-Up Diagrams
Setšoantšo sa 2 Ho hokahana ha boikhethelo ho sebelisa lisebelisoa tse peli (2) tse ikhethileng tsa phepelo ea motlakase
Setšoantšo sa 3 Polarity reversal input ho tloha FACP signaling circuit output (polarity e hlalosoa ka boemo ba alamo)
Setšoantšo sa 4 Ka tloaelo Bulehile: Non-Latching FACP kenya letsoho
Setšoantšo sa 5 Ka tloaelo Bula FACP Latching trigger input with reset (Sephetho sena ha se eso hlahlojoe ke UL)
Setšoantšo sa 6 Ho Koetsoe Ka tloaelo: Ho Kena ha FACP e sa Lateng
Setšoantšo sa 7 Hangata se Koetsoe: Latching FACP trigger input with reset (Sephetho sena ha se so hlahlojoe ke UL)
Kakaretso Dimensions
15.5" x 12" x 4.5" (393.7mm x 304.8mm x 114.3mm)
Altronix ha e ikarabelle bakeng sa liphoso leha e le life tsa ho ngola.140 58th Street, Brooklyn, New York 11220 USA | mohala: 718-567-8181 | fax: 718-567-9056 websebaka: www.altelengx.com | lengolo-tsoibila: info@altronix.com | Warranty ea bophelo bohle
IIACM8E/ACM8CBE
Litokomane / Lisebelisoa
 |
Altronix ACM8E Series ACM8CBE Access Power Controllers [pdf] Tlhophiso Tataiso ACM8E Series, ACM8CBE, Access Power Controllers |
