Nhoroondo ye ACM8E
Svika Power Controllers

Mienzaniso Inosanganisira:
ACM8E – Masere (8) Fuse Yakachengetedzwa Mabudiro
ACM8CBE – Masere (8) PTC Akachengetedzwa Mabudiro

Installation Guide

Kuisa Kambani: __________ Service Rep. Zita: ______________________
Kero: _______________________________________________ Nharembozha: _______________

Overview:

Altronix ACM8E uye ACM8CBE inoshandura imwe (1) 12 kusvika 24 volt AC* kana DC inopinza kuita masere (8) yakazvimiririra inodzorwa yakasanganiswa kana PTC yakadzivirirwa zvinobuda. Aya magetsi anobuda anogona kushandurwa kuita yakaoma fomu "C" contacts (ACM8E chete). Mabudiro anoitwa neakavhurika muunganidzi sink kana anowanzo kuvhurika (NO) yakaoma trigger yekuisa kubva kuAccess Control System, Card Reader, Keypad, Push Button, PIR, etc. Iwo mayuniti achafambisa simba kune akasiyana siyana ekuwana ekudzora hardware zvishandiso zvinosanganisira Mag. Makiyi, Magetsi Anorova, Magnetic Door Holders, etc. Mabudiro achashanda mune ese ari maviri Fail-Safe uye/kana Fail-Secure modes. Mauniti akagadzirwa kuti ashandiswe neakajairika simba sosi inozopa simba kune ese ari maviri bhodhi kushanda uye kuvhara michina, kana maviri (2) akazvimirira ega emagetsi masosi, imwe (1) inopa simba rekushanda kwebhodhi uye imwe yekukiya / yekuwedzera. simba. Iyo FACP Interface inogonesa Emergency Egress, Alarm Monitoring, kana inogona kushandiswa kumutsa mimwe michina yekubatsira. Iyo moto alarm yekubvisa ficha inosarudzwa yega kune chero kana ese masere (8) zvinobuda.
* AC zvikumbiro hazvina kuongororwa neUL

Zvinodiwa:

• 12 kusvika 24volt AC kana DC kushanda (kugadzika hakudiwi).
  (0.6A @ 12 volt, 0.3A @ 24 volt kushandiswa kwemazuva ano nezvose zvinotumirwa zvine simba).
• Sarudzo dzekuisa magetsi: a) Imwe (1) yakajairika magetsi ekuisa
  (bhodhi uye simba rekuvhara). b) Maviri (2) emagetsi ega ega (imwe (1) yesimba rebhodhi uye imwe (1) yekiyi / yehardware simba).
• Masere (8) Kupinda Kudzora Sisitimu inokonzeresa zvinopinza:
  a) Masere (8) anowanzo kuvhurika (NO) zvekupinza.
  b) Masere (8) akavhurika muunganidzi sink inputs.
  c) Chero musanganiswa wezviri pamusoro.
• Zvisere (8) zvinodzorwa zvakazvimirira:
  a) Masere (8) Kutadza-Kuchengeteka uye/kana Kukundikana-Kuchengetedza magetsi kubuda.
  b) Eight (8) yakaoma fomu "C" 5A yakarongwa relay zvabuda (ACM8E chete).
  c) Chero musanganiswa wezviri pamusoro (ACM8E chete).
• Masere (8) ekuwedzera magetsi ekuwedzera (asina kuchinjika).
• Zvinobuda ratings:
  • ACM8E: Mafusi akatemerwa 3.5A imwe neimwe.
  • ACM8CBE: PTCs dzakarongwa 2.5A imwe neimwe.
• Fuse huru yakaiswa pa10A.
  Cherechedza: Yese inobuda ikozvino inotarwa nemagetsi ekupa, kwete kudarika huwandu hwe10A yakazara.
• Ma LED matsvuku anoratidza zvinobuda zvinokonzeresa (relays inergized).
• Moto Alarm disconnect (latching kana kusa-latching) inosarurwa yega kune chero kana ese ezvisere (8) zvinobuda.
  Moto Alarm bvisa sarudzo dzekuisa:
  a) Kazhinji yakavhurika (NO) kana yakajairika yakavharwa (NC) yakaoma yekubata yekupinda.
  b) Polarity reversal input kubva kuFACP signing circuit.
• FACP inoburitsa relay (fomu "C" yekubata yakayerwa @ 1A 28VDC, isina kuongororwa neUL).
• Green LED inoratidza kana FACP ikabviswa.
• Removable terminal blocks inofambisa nyore kuisa.

Enclosure Dimentions (H x W x D): 15.5″ x 12″ x 4.5″ (393.7mm x 304.8mm x 114.3mm).

ACM8E uye ACM8CBE Series Configuration Reference Chati:

Altronix Model Number	Fuse Yakachengetedzwa Zvigadzirwa	PTC Yakachengetedzwa Auto-Resettable Outputs	Output Ratings	Kirasi 2 Yakarongwa Simba-Akaganhurirwa	Agency Listing	UL Listings uye File Numeri
ACM8E	✓	—	3.5A			UL File # BP6714 UL Yakanyorwa yeKupinda Kudzora System Units (UL 294**). "Signal Equipment" Yakaongororwa kuCSA Standard C22.2 No.205-M1983
ACM8CBE	—	✓	2.5A	✓

*Kana ichishandiswa neKirasi 2 Yakayerwa Simba-Limited magetsi ekupa.
* Svika Kudzora Kuita Matanho: Kurwisa Kunoparadza – I; Kutsungirira - IV; Mutsetse Chengetedzo - Ini; Stand-by Simba - I.

Installation Instruction:

1. Mount unit munzvimbo yaunoda.
   Kungwarira review:

   Terminal Identification Tafura	(pg. 4)	Yakajairika Anwendung Diagram	(pg. 5)
   Akatungamirira Diagnostics	(pg. 4)	Hook-up Diagrams	(pg. 6)

2. Kupa magetsi:
   Iwo mayunitsi anogona kupihwa simba neamwechete (1) magetsi anozopa simba kune ese ari maviri bhodhi kushanda uye kukiya michina kana maviri (2) akasiyana magetsi emagetsi, imwe (1) kupa simba rekushanda kwebhodhi uye imwe kupa simba. yemidziyo yekukiya uye/kana yekuwana yekudzora hardware.
   Cherechedza: Simba rekuisa rinogona kunge riri gumi nemaviri kusvika kumakumi maviri nemana volts AC kana DC (12A @ 24 volt, 0.6A @ 12 volt mashandisirwo azvino ane relay dzese dzakasimbiswa).
   (a) Single power supply input:
   Kana yuniti nemidziyo yekukiya zvichizoiswa magetsi uchishandisa simba rimwe chete, batanidza chinobuda (12 kusvika 24 volts AC kana DC) kune materminal akanyorwa [ Simba +].
   (b) Dual magetsi ekushandisa (Mufananidzo 1c, peji 5):
   Kana kushandiswa kwezvinhu zviviri zvemagetsi zvichidikanwa, jumpers J1 uye J2 (iri kuruboshwe rwemagetsi / kutonga zviteshi) inofanira kutemwa. Batanidza magetsi eyuniti kumaterminals akanyorwa [ Kudzora +] uye batanidza simba rezvishandiso zvekukiya kumaterminals akaiswa [ Simba +].
   Cherechedza: Paunenge uchishandisa DC magetsi emagetsi polarity inofanirwa kucherechedzwa.
   Paunenge uchishandisa AC magetsi emagetsi polarity haifaniri kucherechedzwa (Fig. 1d, pg. 5).
   AC zvikumbiro hazvina kuongororwa neUL.
   Cherechedza: Kutevedzera UL magetsi anopihwa anofanira kunge ari UL Yakanyorwa yeAccess Control Systems nezvimwe.
3. Opput options (Mufananidzo 1, peji 5):
   Iyo ACM8E inopa angave masere (8) akachinja magetsi emagetsi, masere (8) yakaoma fomu "C" kubuda, kana chero musanganiswa wesimba rakachinjika uye fomu "C" zvinobuda, pamwe masere (8) asina kuchinjika ekuwedzera magetsi ekuwedzera. Iyo ACM8CBE inopa masere (8) akachinja magetsi emagetsi kana masere (8) asina kuchinjika ekuwedzera magetsi ekuwedzera.
   (a) Akachinja Simba kubuda:
   Batanidza iyo isina kunaka () inopinza yemudziyo uri kupihwa magetsi kune terminal yamaka [COM]. YeFail-Safe operation batanidza iyo yakanaka (+) inopinza yemudziyo uri kufambiswa kune terminal yakanyorwa [NC]. YeFail-Secure operation batanidza iyo yakanaka (+) yekupinda yemudziyo uri kufambiswa kune terminal yakanyorwa [NO].
   (b) Fomu “C” zvabuda (ACM8E chete):
   Kana fomu "C" zvinobuda pazvinenge zvichidiwa iyo inoenderana inobuda fuse (1-8) inofanira kubviswa. Batanidza zvisina kunaka () yemagetsi ekupa zvakananga kune yekukiya mudziyo. Batanidza iyo yakanaka (+) yemagetsi emagetsi kune terminal yakanyorwa [C]. Kushanda kwaFail-Safe batanidza iyo yakanaka (+) yemudziyo uri kufambiswa kune terminal yakanyorwa NC]. YeFail-Secure operation batanidza iyo yakanaka (+) yemudziyo uri kufambiswa kuterminal yakanyorwa [NO].
   (c) Magetsi ekuwedzera (asina kuchinjika): Batanidza zvakanaka (+) mapindiro emudziyo uri kufambiswa kuterminal yamaka [C] uye yakaipa () yemudziyo uri kufambiswa kuterminal yamaka [COM]. Kubuda kunogona kushandiswa kupa simba kune vaverengi vemakadhi, keypads nezvimwe.
4. Input trigger options (Mufananidzo 1, peji 5):
   (a) Kazhinji Vhura [NO] yekuisa trigger:
   Inputs 1-8 inobatiswa neyakavhurika kana yakavhurika yekuunganidzira sink yekupinda. Batanidza midziyo (zviverengi zvemakadhi, makiyipadhi, chikumbiro chekubuda mabhatani nezvimwewo) kumateminari akanyorwa [IN] uye [GND].
   (b) Vhura Collector Sink inputs:
   Batanidza iyo yekupinda control panel yakavhurika muunganidzi sink yakanaka (+) kune terminal yamaka [IN] uye yakaipa () kune terminal yakanyorwa [GND].
5. Fire Alarm Interface sarudzo (Mifananidzo 3 kusvika ku7, peji 6):
   Iyo inowanzovharwa [NC], inowanzovhura [NO] yekupinda kana polarity reversal input kubva kuFACP siginacha wedunhu inokonzeresa zvakasarudzwa. Kugonesa FACP Dimbura kune chinobuda dzima switch inoenderana [SW1-SW8] DZIMA. Kudzima FACP dimbura kune chinobuda batidza switch inoenderana [SW1-SW8] VANGA.
   (a) Kazhinji Vhura [NO] kuisa:
   Nekusina-latching hook-up ona mufananidzo 4, p. 6. Nekusunga hook-up ona mufananidzo 5, p. 6.
   (b) Kazhinji Yakavharwa [NC] kuisa:
   Nekusina-latching hook-up ona mufananidzo 6, p. 6. Nekusunga hook-up ona mufananidzo 7, p. 6.
   (c) FACP Signaling Circuit input trigger:
   Batanidza chakanaka (+) nechakaipa () kubva paFACP inosaina dunhu rinobuda kune materminal akanyorwa [+ INP ]. Batanidza FACP EOL kumaterminals akaiswa [+ RET ] (polarity inotaridzwa mualarm condition). Jumper J3 inofanira kutemwa (Mufananidzo 3, peji 6).
6. FACP Dry fomu "C" kubuda (Mufananidzo 1a, peji 5):
   Batanidza mudziyo waunoda kuti ubviswe neyuniti yakaoma kuonana inobuda kumaterminal akanzi [NO] uye [C] FACP yeanowanzo kuvhurika inobuda kana materminal akamakwa [NC] uye [C] FACP yeanowanzo kuvharwa kubuda.

LED Diagnostics:

LED	ON	DZIMA
LED 1- LED 8 (Dzvuku)	Output relay(s) simba.	Output relay(s) de-energized.
Trg (Green)	FACP inopinza yakakonzeresa (alarm mamiriro).	FACP yakajairika (isina-alarm mamiriro).

Terminal Identification Tables:

Terminal Legend	Basa/ Tsanangudzo
Simba +	12VDC kana 24VDC kupinza kubva kumagetsi ekupa bhodhi.
Kudzora +	Aya materminal anogona kubatana kune yakaparadzana UL Yakanyorwa magetsi ekupa ega ekushandisa simba reACM8E/ACM8CBE (jumpers J1 neJ2 inofanira kubviswa).
TRIGGER KUPIWA 1 – INPUT 8 IN, GND	Kubva pane zvakajairika kuvhurika uye / kana kuvhurika muunganidzi sink trigger zvinopinza (chikumbiro chekubuda mabhatani, kubuda pir's, nezvimwewo).
ZVINOBUDZWA 1 – ZVINOBUDA 8 NC, C, NO, COM	12 kusvika 24 volts AC/DC inokonzeresa zvinodzorwa zvinobuda: Fail-Safe [NC positive 9-) & COM Negative (—)1, Kutadza-Kuchengetedza [HAPANA zvakanaka (+) & COM Negative (—)], Wedzero goho [C yakanaka 9-) & COM Negative (—)] (Kana uchishandisa AC magetsi emagetsi polarity haifanirwe kucherechedzwa), NC, C, HAPANA inova fomu “C” 5A/24VACNDC yakatemerwa mabudiro akaoma kana fuse dzabviswa (ACM8E). Mazita anoratidzwa mune isiri-yakatangwa.
FACP INTERFACE T, + INPUT -	Fire Alarm Interface inokonzeresa kupinza kubva kuFACP. Trigger inputs inogona kuvhurika kazhinji, kazhinji yakavharwa kubva kuFACP inobuda dunhu (Fig. 3 kusvika 7, pgs. 6-7).
FACP INTERFACE NC, C, NO	Fomu "C" relay contact yakarongwa © 1A 28VDC yekuzivisa alarm. (Ichi chinobuda hachina kuongororwa neUL).

Yakajairika Yekushandisa Dhiyagiramu:

YAMBIRO: Kuti uderedze njodzi yemoto kana kuvhunduka kwemagetsi, usafumura iyo unit kunaya kana unyoro.
Tsiva fuse (ACM8E chete) nemhando imwechete uye chiyero, 3.5A/250V.

Hook-Up Diagrams:

Fig. 2 Optional hoko-up uchishandisa maviri (2) ega ega ekupa magetsi ekuisa:

Fig.3

Fig. 4 Kazhinji Kuvhurika: Isiri-Latching FACP trigger input:

Fig. 5 Kazhinji Vhura FACP Latching trigger input ine reset (Iyi inobuda haina kuongororwa neUL):

Fig. 6 Kazhinji Yakavharwa: Isingabatike FACP inokonzeresa kuisa:

Mufananidzo wegumi

Enclosure Dimensions:

15.5" x 12" x 4.5" (393.7mm x 304.8mm x 114.3mm)

Altronix haina mhosva kune chero zvikanganiso zve typographical.
140 58th Street, Brooklyn, New York 11220 USA | foni: 718-567-8181 | fax: 718-567-9056
websaiti: www.altronix.com | e-mail: info@altronix.com | Hupenyu hwese Warranty
IIACM8E/ACM8CBE L14V
ACM8E/ACM8CBE Installation Guide

Zvinyorwa / Zvishandiso

Altronix ACM8E Series Access Power Controllers [pdf] Installation Guide ACM8E, ACM8CBE, ACM8E Series Access Power Controllers, ACM8E Series, Access Power Controllers, Power Controllers, Controllers

References

• User Manual