ACM8E Series
Access Power Controllers
Qauv suav nrog:
ACM8E – Yim (8) Fuse Protected Outputs
ACM8CBE – Yim (8) PTC Protected Outputs
Daim ntawv qhia kev teeb tsa
Kev Txhim Kho Lub Tuam Txhab: ____________ Lub Npe Lub Npe: ______________________
Chaw Nyob: _________________________________ Xov tooj #: ________________
Tshajview:
Altronix ACM8E thiab ACM8CBE hloov ib qho (1) 12 mus rau 24 volt AC * lossis DC input rau yim (8) ntawm nws tus kheej tswj fused lossis PTC tiv thaiv tawm. Cov zis hluav taws xob no tuaj yeem hloov mus rau daim ntawv qhuav "C" hu (ACM8E nkaus xwb). Cov zis tawm tau qhib los ntawm lub dab dej qhib los yog ib txwm qhib (NO) cov lus qhia qhuav los ntawm Access Control System, Card Reader, Keypad, Push Button, PIR, thiab lwm yam. Cov chav nyob yuav xa lub zog mus rau ntau yam kev tswj xyuas cov cuab yeej siv xws li Mag Locks, Hluav taws xob Strikes, Magnetic Door Holders, thiab lwm yam. Outputs yuav ua hauj lwm nyob rau hauv ob qho tib si Fail-Safe thiab/los yog Fail-Secure hom. Cov chav nyob yog tsim los siv los ntawm ib qho chaw siv hluav taws xob uas yuav muab lub zog rau kev ua haujlwm ntawm lub rooj tsavxwm thiab cov khoom siv xauv, lossis ob (2) tag nrho cov khoom siv hluav taws xob ywj pheej, ib qho (1) muab lub zog rau kev ua haujlwm ntawm lub rooj tsavxwm thiab lwm yam rau kev xauv / khoom siv. zog. FACP Interface ua rau muaj kev kub ntxhov, kev soj ntsuam lub tswb, lossis siv tau los ua rau lwm yam khoom siv pabcuam. Lub tswb hluav taws kub disconnect feature yog xaiv ib tus zuj zus rau ib qho lossis tag nrho ntawm yim (8) tso tawm.
* AC daim ntawv thov tsis raug ntsuas los ntawm UL
Specifications:
- 12 mus rau 24volt AC lossis DC ua haujlwm (tsis xav tau).
(0.6A @ 12 volt, 0.3A @ 24 volt tam sim no noj nrog tag nrho cov relays energized). - Fais fab mov tswv yim xaiv: a) Ib (1) hom fais fab input
(board thiab xauv lub zog). b) Ob (2) cov khoom siv hluav taws xob cais tawm (ib qho (1) rau lub rooj tsav xwm lub zog thiab ib qho (1) rau lub xauv / kho vajtse zog). - Yim (8) Access Control System ua rau cov khoom nkag:
a) Yim (8) ib txwm qhib (NO) inputs.
b) Yim (8) qhib collector dab inputs.
c) Txhua qhov sib xyaw ntawm cov saum toj no. - Yim (8) ntawm nws tus kheej tswj cov zis:
a) Yim (8) Fail-Safe thiab/lossis Fail-Secure fais fab tuag.
b) Yim (8) daim ntawv qhuav "C" 5A rated relay outputs (ACM8E nkaus xwb).
c) Ib qho kev sib xyaw ua ke ntawm cov saum toj no (ACM8E nkaus xwb). - Yim (8) auxiliary power outputs (unswitched).
- Tso zis ntsuas:
- ACM8E: Fuses raug ntsuas 3.5A txhua.
- ACM8CBE: PTCs raug ntsuas 2.5A txhua.
- Main fuse yog ntsuas ntawm 10A.
Nco tseg: Tag nrho cov zis tam sim no yog txiav txim siab los ntawm cov khoom siv hluav taws xob, tsis pub tshaj 10A tag nrho. - Liab LEDs qhia tias cov zis tau tshwm sim (relays energized).
- Hluav taws kub tswb disconnect (latching los yog tsis-latching) yog ib tug neeg xaiv rau ib los yog tag nrho ntawm yim (8) outputs.
Fire Alarm disconnect input xaiv:
a) Nquag qhib (NO) lossis ib txwm kaw (NC) kev tiv tauj qhuav.
b) Polarity reversal input los ntawm FACP signaling circuit. - FACP tso zis relay (daim ntawv "C" tiv tauj @ 1A 28VDC, tsis ntsuas los ntawm UL).
- Green LED qhia thaum FACP disconnect yog tshwm sim.
- Tshem tawm cov terminal blocks yooj yim ntawm installation.
Enclosure Dimentions (H x W x D): 15.5 "x 12" x 4.5" (393.7mm x 304.8mm x 114.3mm).
ACM8E thiab ACM8CBE Series Configuration Reference Chart:
| Altronix Model Number | Fuse Protected Outputs | PTC tiv thaiv Nws pib-Resettable Outputs |
Kev Ntsuas Tawm | Chav Kawm 2 Rated Fais fab-Limited | Daim ntawv teev npe koom haum | UL Listings thiab File Tus lej |
| ACM8E | ✓ | — | 3.5 A |  |
UL File #BP6714 UL Sau npe rau Kev Tswj Xyuas System Units (UL 294**). "Signal Equipment" soj ntsuam rau CSA Standard C22.2 No. 205-M1983 |
|
| ACM8 CWB | — | ✓ | 2.5 A | ✓ |
* Thaum siv nrog Chav Kawm 2 Rated Power-Limited fais fab mov.
* Nkag mus Tswj Kev Ua Haujlwm Qib: Kev puas tsuaj - Kuv; Endurance - IV; Kab Kev Ruaj Ntseg - Kuv; Stand-by Power - Kuv.
Cov lus qhia installation:
- Mount chav nyob rau hauv qhov chaw xav tau.
Ua tib zoo rovview:Terminal Identification Table (pg. 4) Hom Daim Ntawv Thov (pg. 5) LED Diagnostics (pg. 4) Daim duab sib dhos (pg. 6) - Lub hwj chim muab tswv yim:
Cov chav nyob tuaj yeem siv tau nrog ib qho (1) lub zog hluav taws xob uas yuav muab lub zog rau kev ua haujlwm ntawm lub rooj tsavxwm thiab cov khoom siv xauv los yog ob (2) cov khoom siv hluav taws xob sib cais, ib qho (1) muab lub zog rau lub rooj tsavxwm thiab lwm yam los muab lub zog. rau cov khoom siv xauv thiab / lossis nkag mus rau kev tswj hwm kho vajtse.
Nco tseg: Lub zog hluav taws xob tuaj yeem yog 12 txog 24 volts AC lossis DC (0.6A @ 12 volt, 0.3A @ 24 volt tam sim no noj nrog tag nrho cov relays energized).
(a) Ib qho khoom siv hluav taws xob ib leeg:
Yog hais tias chav tsev thiab cov khoom siv xauv yuav tsum tau siv lub zog siv ib zaug, txuas cov zis (12 mus rau 24 volts AC lossis DC) mus rau lub terminals cim [Hwj chim +].
(b) Dual fais fab mov inputs (Daim duab 1c, pg. 5):
Thaum siv ob lub zog siv hluav taws xob xav tau, jumpers J1 thiab J2 (nyob rau sab laug ntawm lub hwj chim / tswj terminals) yuav tsum raug txiav. Txuas lub hwj chim rau chav tsev mus rau lub terminals cim [Control +] thiab txuas lub hwj chim rau lub xauv cov cuab yeej rau lub terminals cim [Hwj chim +].
Nco tseg: Thaum siv DC fais fab khoom siv polarity yuav tsum tau soj ntsuam.
Thaum siv AC fais fab mov polarity yuav tsum tsis txhob raug soj ntsuam (Fig. 1d, pg. 5).
Cov ntawv thov AC tsis raug ntsuas los ntawm UL.
Nco tseg: Rau UL ua raws li cov khoom siv hluav taws xob yuav tsum yog UL Daim Ntawv Teev Npe rau Access Control Systems thiab accessories. - Cov kev xaiv tso zis (Daim duab 1, p.5):
ACM8E muab yim (8) hloov hluav taws xob tawm, yim (8) qhuav daim ntawv "C" tso tawm, lossis ib qho kev sib txuas ntawm ob qho tib si hloov hluav taws xob thiab daim ntawv "C" tso tawm, ntxiv rau yim (8) cov khoom siv hluav taws xob tsis hloov pauv. ACM8CBE muab yim (8) hloov hluav taws xob tso tawm lossis yim (8) tsis hloov pauv cov khoom siv hluav taws xob.
(a) Switched Power outputs:
Txuas qhov tsis zoo () cov tswv yim ntawm lub cuab yeej siv rau lub davhlau ya nyob twg cim [COM]. Rau Kev Ua Haujlwm Tsis Muaj Kev Nyab Xeeb txuas qhov zoo (+) cov tswv yim ntawm lub cuab yeej siv rau lub davhlau ya nyob twg cim [NC]. Rau kev ua haujlwm tsis ruaj ntseg txuas rau qhov zoo (+) cov tswv yim ntawm lub cuab yeej raug xa mus rau lub davhlau ya nyob twg cim [NO].
(b) Daim ntawv "C" tso tawm (ACM8E nkaus xwb):
Thaum daim ntawv "C" cov zis xav tau, cov zis fuse (1-8) yuav tsum raug tshem tawm. Txuas qhov tsis zoo () ntawm cov khoom siv hluav taws xob ncaj qha mus rau lub ntsuas phoo. Txuas qhov zoo (+) ntawm lub hwj huam mov mus rau lub davhlau ya nyob twg cim [C]. Rau Kev Ua Haujlwm Tsis Muaj Kev Nyab Xeeb txuas qhov zoo (+) ntawm lub cuab yeej raug xa mus rau lub davhlau ya nyob twg cim NC]. Rau kev ua haujlwm tsis ruaj ntseg txuas rau qhov zoo (+) ntawm lub cuab yeej siv rau lub davhlau ya nyob twg cim [NO].
(c) Cov khoom siv hluav taws xob txhawb nqa (tsis hloov): Txuas qhov zoo (+) cov tswv yim ntawm lub cuab yeej siv rau lub davhlau ya nyob twg cim [C] thiab qhov tsis zoo () ntawm lub cuab yeej raug xa mus rau lub davhlau ya nyob twg cim [COM]. Cov zis tuaj yeem siv los muab lub zog rau daim npav nyeem ntawv, keypads thiab lwm yam. - Input trigger xaiv (Daim duab 1, p.5):
(a) Nquag Qhib [NO] input trigger:
Cov khoom siv 1-8 yog qhib los ntawm ib txwm qhib lossis qhib cov khoom ntim khoom ntim khoom. Txuas cov khoom siv (daim npav nyeem ntawv, keypads, thov kom tawm cov nyees khawm thiab lwm yam) rau cov terminals cim [IN] thiab [GND].
(b) Qhib Collector Sink inputs:
Txuas lub vaj huam sib luag rau kev nkag mus qhib cov khoom siv dab dej zoo (+) mus rau lub davhlau ya nyob twg cim [IN] thiab qhov tsis zoo () mus rau lub davhlau ya nyob twg cim [GND]. - Kev xaiv hluav taws kub tswb Interface (Daim duab 3 txog 7, pg. 6):
Ib txwm kaw [NC], ib txwm qhib [NO] cov tswv yim lossis polarity reversal input los ntawm FACP signaling circuit yuav ua rau cov khoom siv tau xaiv. Txhawm rau pab kom FACP Disconnect rau qhov tso zis tig qhov sib txuas [SW1-SW8] OFF. Txhawm rau lov tes taw FACP disconnect rau qhov tso zis tig qhov sib txuas [SW1-SW8] ON.
(a) Nquag Qhib [NO] input:
Rau qhov tsis-latching hook-up saib daim duab 4, pg. 6. Rau latching hook-up saib daim duab 5, pg. 6.
(b) Nquag Kaw [NC] input:
Rau qhov tsis-latching hook-up saib daim duab 6, pg. 6. Rau latching hook-up saib daim duab 7, pg. 6.
(c) FACP Signaling Circuit input trigger:
Txuas qhov zoo (+) thiab qhov tsis zoo () los ntawm FACP signaling circuit output rau cov terminals cim [+ INP]. Txuas lub FACP EOL mus rau lub davhlau ya nyob twg uas cim [+ RET] (polarity yog hais txog hauv lub tswb). Jumper J3 yuav tsum tau txiav (Fig. 3, pg. 6). - FACP Qhuav daim ntawv "C" tso zis (Daim duab 1a, pg. 5):
Txuas cov khoom siv uas xav tau los ua los ntawm chav tsev qhov kev tiv tauj qhuav rau cov terminals cim [NO] thiab [C] FACP rau ib txwm qhib tawm lossis cov terminals cim [NC] thiab [C] FACP rau ib txwm kaw cov zis.
LED Diagnostics:
| LED | ON | OFF |
| LED 1- LED 8 (Liab) | Output relay(s) energized. | Output relay(s) de-energized. |
| Trg (ntsuab) | FACP input triggered (lub tswb mob). | FACP li qub (tsis yog lub tswb). |
Terminal Identification Tables:
| Terminal lus dab neeg | Function/Kev piav qhia |
| Lub zog + | 12VDC lossis 24VDC tawm tswv yim los ntawm lub rooj tsavxwm fais fab. |
| Tswj + | Cov terminals no tuaj yeem txuas mus rau ib qho cais UL Daim Ntawv Teev Cov Khoom Siv Hluav Taws Xob los muab kev ua haujlwm cais tawm rau ACM8E / ACM8CBE (jumpers J1 thiab J2 yuav tsum raug tshem tawm). |
| TIG INPUT 1 – INPU 8 IN, GND |
Los ntawm ib txwm qhib thiab / lossis qhib cov dab dej sib sau ua rau cov khoom nkag (thov kom tawm cov nyees khawm, tawm pir's, thiab lwm yam). |
| QHOV TSEEB 1 – TXOG 8 NC, C, NO, COM |
12 mus rau 24 volts AC / DC trigger controlled outputs: Fail-Safe [NC positive 9-) & COM Negative (—)1, Fail-Secure [NO positive (+) & COM Negative (—)], Pab txhawb cov zis [C zoo 9-) & COM Negative (—)] (Thaum siv AC fais fab mov polarity yuav tsum tsis txhob raug soj ntsuam), NC, C, TSIS tau dhau los ua "C" 5A / 24VACNDC ntsuas cov khoom tawm qhuav thaum fuses raug tshem tawm (ACM8E). Cov kev sib cuag tau pom nyob rau hauv lub xeev uas tsis yog-triggered. |
| FACP INTERFACE T, + tswv yim - | Hluav taws kub tswb Interface ua rau cov tswv yim los ntawm FACP. Cov khoom siv hluav taws xob tuaj yeem qhib tau ib txwm, feem ntau kaw los ntawm FACP tso zis hluav taws xob (Daim duab 3 txog 7, pgs. 6-7). |
| FACP INTERFACE NC, C, NO | Daim ntawv "C" relay hu rau © 1A 28VDC rau kev ceeb toom ceeb toom. (Cov zis no tsis tau soj ntsuam los ntawm UL). |
Hom Daim Ntawv Thov:
CEEB TOOM: Txhawm rau txo qhov kev pheej hmoo ntawm hluav taws kub lossis hluav taws xob poob siab, tsis txhob tso lub tsev los nag lossis dej noo.
Hloov fuses (ACM8E nkaus xwb) nrog tib hom thiab ntsuas, 3.5A / 250V.
Hook-Up Diagrams:
Fig. 2 Kev xaiv sib txuas siv ob (2) cov khoom siv hluav taws xob cais tawm:
Fig. 3 Polarity reversal input los ntawm FACP signaling circuit output (polarity yog siv nyob rau hauv lub tswb):
Fig. 4 Nquag Qhib: Tsis-Latching FACP cuam tshuam cov tswv yim:
Fig. 5 Nquag Qhib FACP Latching trigger input nrog pib dua (Cov zis no tsis tau raug soj ntsuam los ntawm UL):
Fig. 6 Nquag Kaw: Tsis-Latching FACP cuam tshuam cov tswv yim:
Fig. 7 Nquag Kaw: Latching FACP trigger input nrog pib dua (Cov zis no tsis tau raug soj ntsuam los ntawm UL):
Enclosure Dimensions:
15.5 "x 12" x 4.5" (393.7mm x 304.8mm x 114.3mm)
Altronix tsis yog lub luag haujlwm rau txhua qhov yuam kev typographical.
140 58th Street, Brooklyn, New York 11220 USA | xov tooj: 718-567-8181 Ib | fax: 718-567-9056 Ib
webqhov chaw: www.altronix.com | e-mail: yog info@altronix.com | Lub neej Warranty
IIACM8E/ACM8CBE L14V
ACM8E/ACM8CBE Installation Guide
Cov ntaub ntawv / Cov ntaub ntawv
 |
Altronix ACM8E Series Access Power Controllers [ua pdf] Daim ntawv qhia kev teeb tsa ACM8E, ACM8CBE, ACM8E Series Access Power Controllers, ACM8E Series, Access Power Controllers, Fais fab Controllers, Controllers |
