P1、P2、P3、P4、P5

DIM/CT/RGB/RGBW/RGBCW LED Controller

• Small size and light weight. The housing is made from V0 flame retardant
• PC materials from SAMSUNG/COVESTRO.
• Soft-on uye fade-in dimming basa rinowedzera kunyaradza kwako kwekuona.
• 2.4GHz wireless signal , eliminating the need for signal wiring.
• 1-5 channel constant voltage kubuda.
• Dzora DIM, CT, RGB, RGBW, RGBCW chiedza.
• Shanda neMINI akatevedzana RF 2.4GHz kure.
• P3, P4 and P5 have 9 built-in dynamic modes.
• One controller can be paired up with 10 remotes .
• Batanidza dynamic mhedzisiro pakati pevatongi muboka rimwechete/zone.

Technical Specs

Model	P1	P2	P3	P4	P5
Input Signal	RF2.4GHz
Chiyamuro Voltage	12-48V =
Kubuditsa Voltage	12-48V
Channels	1CH	2 CH	3 CH	4 CH	5 CH
Reset Switch	Ehe	Ehe	Ehe	Aihwa	Aihwa
Load Current	Max. 11A	Max. 12A	Max. 15A	Max. 15A	Max. 15A
Load Power	132W@12V 240W@24V 288W@36V 384W@48V	144W@12V 240W@24V 288W@36V 384W@48V	180W@12V 360W@24V 432W@36V 432W@48V	180W@12V 288W@24V 360W@36V 480W@48V	180W@12V 360W@24V 450W@36V 600W@48V
Compatible Remote Contro Models	Single-zone: M1A/M1B Multi-zone: M1C/M1D Programmable: M9	Nzvimbo-imwe: M1A/M1B/M2A/M2B Multi-zone: M1C/M1D/M2C/M2D Inorongwa: M9	Single-zone: m1A/M113/m2A/m2B1 M4A/M4B Multi-zone: M1C/M1D/M2C/M2D/ M4C/M4D Zvinogoneka: M9	Single-zone: m1A/m113/M2A/m2B1 M4A/M4B Multi-zone: M1C/M1D/M2C/M2D/ M4C/M4D Zvinogoneka: M9	Single-zone: M1A/M1B/m2A/M2B/ M4A/m4B/M5A/M5B Multi-zone: M1C/M1D/M2C/M2D/ M4C/M4D/M5C/M5D Programmable: M9
Dziviriro	Short circuit dziviriro, over-temperature dziviriro, over-current protection, and reverse connection kudzivirira kudzivirira
Working Temp.	-25°C – 50°C
Dimension	L91 xW37xH21(mm)
Package Size	L94xW39xH22(mm)
Huremu (GW)	46g

Kukura Kwechigadzirwa

Chikamu: mm

Tsananguro Yemagetsi

Wiring Diagram

Kana P1 yakabatana kune inodzima mwenje tamboKana P2 yakabatana kune inodzima mwenje tamboKana P2 yakabatana kune yemavara tembiricha mwenje tamboKana P3 yakabatana kune inodzima mwenje tamboKana P3 yakabatana kune yemavara tembiricha mwenje tamboKana P3 yakabatana neRGB mwenje tambo

Cherechedza: The control type of PUSH DIM will switch according to the type of the remote control.
Kana P4 yakabatana kune inodzima mwenje tambo

Kana P4 yakabatana kune yemavara tembiricha mwenje tambo

Kana P4 yakabatana neRGB mwenje tambo

Kana P4 yakabatana neRGBW mwenje tambo

Kana P5 yakabatana kune inodzima mwenje tambo

Kana P5 yakabatana kune yemavara tembiricha mwenje tambo

Kana P5 yakabatana neRGB mwenje tambo

Kana P5 yakabatana neRGBW mwenje tambo

Kana P5 yakabatana neRGBCW mwenje tambo

Batanidza remote

Batanidza remote uchishandisa bhatani

1. Short press the ID learning button on the controller and the indicator light flashes. Please complete the following steps within 10 seconds.
2. Pair the MINI series remote:
   Single-zone MINI remote: Long press the ON/OFF button until the controller’s indicator light flashes fast.
   Multi-zone MINI remote: Long press zone button until the controller’s indicator light flashes fast.
3. When the load light of the controller flashes slowly and then stays on constantly, the learning is successful.

Batanidza remote nekuisa simba pa controller

1. Power off the controller first.
2. Pair the MINI series remote:
   Single-zone MINI remote: Long press the ON/OFF button and power on the controller at the same time until the controller’s indicator light flashes fast.
   Multi-zone MINI remote: Long press zone button and power on the controller at the same time until the controller’s indicator light flashes fast.
3. When the load light of the controller flashes slowly and then stays on constantly, the learning is successful.

Cherechedza: A controller can be paired with a maximum of 10 remotes. Pairing more than 10 remotes will automatically delete the earliest remote ID codes.

Bvisa remote

Bvisa remote uchishandisa bhatani:

1. Delete all remote parings
   Long press the ID learning button on the controller for 10 seconds, and then short press it for 6 times. When controller’s indicator light flashes and then stays on, pairing removal is successful.
2. Dzima imwe kure kure paring
   Single-zone Mini: Press and hold the ID learning key of the controller for 5 seconds. Within 10 seconds, press the on/off key three times briefly. When the load light flashes slowly and then stays on constantly, the code clearing is successful.
   Multi-zone Mini: Press and hold the ID learning key of the controller for 5 seconds. Within 10 seconds, press the zone key three times briefly. When the load light flashes slowly and then stays on constantly, the code clearing is successful.

Bvisa rimoti nekubatisa controller

Dzima imwe kure kure paring
Single-zone Mini: Power on the controller for 2 seconds, then power it off for 2 seconds, and power it on again. Press the on/off key three times briefly within 3 seconds. When the load light flashes slowly and then stays on constantly, the code clearing is successful.
Multi-zone Mini: Power on the controller for 2 seconds, then power it off for 2 seconds, and power it on again. Press the zone key three times briefly within 3 seconds. When the load light flashes slowly and then stays on constantly, the code clearing is successful.

Installation Precautions

Please do not stack the products. The distance between two products should be ≥15cm so as not to aect heat dissipation and the lifespan of the products.Please do not place the products on the . The distance between the product and the should be ≥100cm so as to avoid signal interference.Ndapota usaise zvigadzirwa pedyo nenzvimbo yakakura yezvinhu zvesimbi (senge simbi stud ceilings). Chinhambwe chiri pakati pechigadzirwa uye chinhu chesimbi chinofanira kunge chiri ≥15cm kuitira kudzivirira kukanganiswa kwechiratidzo.                        Ndapota usaise zvigadzirwa pamatanda kana pedyo nemakona. Nharaunda pakati pechigadzirwa nedanda kana kona inofanira kunge iri ≥15cm kuitira kudzivirira kukanganiswa kwechiratidzo.

Attention

• Kuiswa kwechigadzirwa uye kutumwa kunofanirwa kuitwa nenyanzvi ine hunyanzvi.
• Zvigadzirwa zveLTECH hazvisi uye kwete mheni isina-mvura (mamodheru akasarudzika kunze). Ndapota dzivisa zuva nemvura. Kana yaiswa panze, ndapota ita shuwa kuti akaiswa munzvimbo inodzivirira mvura kana munzvimbo ine zvidziviriro zvemheni.
• Kupisa kwakanaka kunopisa kuchawedzera hupenyu hwechigadzirwa. Ndapota isa chigadzirwa munzvimbo ine mhepo yakanaka.
• During installation, avoid being close to large-area metallic objects or stacking the devices, so as to prevent signal interference from affecting the usage.
• Avoid installing in thunderstorm-prone areas, areas with strong magnetic fields, and high-voltage nzvimbo.
• Paunenge waisa chigadzirwa ichi, ndapota dzivisa kuva pedyo nenzvimbo yakakura yezvinhu zvesimbi kana kuzviturikidza kudzivirira kukanganiswa kwechiratidzo.
• Ndokumbira utarise kana iri kushanda voltage yakashandiswa inopindirana nezvinodiwa parameter yechigadzirwa.
• Before you power on the product, please make sure all the wiring is correct in case of incorrect connection that may cause a short circuit and damage the components, or trigger a accident.
• Kana kukanganisa kukaitika, ndapota usaedze kugadzirisa chigadzirwa uri wega. Kana uine chero mubvunzo, tapota taura nemutengesi.
• Iri bhuku rinoenderana neshanduko pasina kuziviswazve. Chigadzirwa mabasa zvinoenderana nezvinhu. Ndokumbirawo unzwe wakasununguka kutaura nevaparidzi vedu vepamutemo kana uine chero mubvunzo.

Cherechedza: The temperature within the installation area should be within the working temperature range of the products. Please do not install products inside LED es to avoid temperature exceeding the working temperature that may aect the product lifetime.

Chibvumirano cheWarranty

Warranty nguva kubva pazuva rekutumira: 5 makore.
Kugadziriswa kwemahara kana kutsiva masevhisi ematambudziko emhando inopihwa mukati mewaranti nguva.
Warranty inosiyiwa pazasi:

• Kupfuura waranti nguva.
• Chero kukuvadzwa kwekugadzira kunokonzerwa nehigh voltage, kuwandisa, kana mashandiro asina kunaka.
• Zvigadzirwa zvine kukuvara kwakanyanya kwemuviri.
• Kukuvadza kunokonzerwa nenjodzi dzinongoitika dzoga uye simba majeure.
• Warranty labels nebarcodes dzakuvadzwa.
• Hapana chibvumirano chakasainwa neLTECH.

1. Kugadzirisa kana kutsiva kwakapihwa ndiyo chete mushonga wevatengi. LTECH haina mhosva yekukuvara chero kwakaitika kana kwakakonzeresa kunze kwekunge kuri mukati memutemo.
2. LTECH ine kodzero yekugadziridza kana kugadzirisa zvirevo zvewaranti iyi, uye kuburitswa kwakanyorwa kuchaita.

ZHUHAI LTECH TECHNOLOGY CO., LTD.
Add: No. 183 , Shui’an 1st Road, Xiangzhou
District, 519060 Zhuhai City
YEVANHU NYIKA YECHAINA
Websaiti: www.ltech-led.com

Zvinyorwa / Zvishandiso

LTECH P1 RGBCW Mutongi we LED [pdf] Bhuku reMuridzi P1, P1 RGBCW Mutongi we LED, RGBCW Mutongi we LED, Mutongi we LED, Mutongi

References

• User Manual