P1、P2、P3、P4、P5
DIM/CT/RGB/RGBW/RGBCW Mai Kula da LED
- Small size and light weight. The housing is made from V0 flame retardant
- PC materials from SAMSUNG/COVESTRO.
- Soft-on da Fade-in dimming function yana inganta jin daɗin gani.
- 2.4GHz wireless signal , eliminating the need for signal wiring.
- 1-5 channel constant voltage fitarwa.
- Sarrafa DIM, CT, RGB, RGBW, RGBW haske.
- Yi aiki tare da jerin MINI RF 2.4GHz nesa.
- P3, P4 and P5 have 9 built-in dynamic modes.
- One controller can be paired up with 10 remotes .
- Daidaita tasiri mai ƙarfi tsakanin masu sarrafawa a rukuni/shiyya ɗaya.
Bayanan Fasaha
| Samfura | P1 | P2 | P3 | P4 | P5 |
| Alamar shigowa | RF2.4GHz | ||||
| Shigar da Voltage | 12-48V = | ||||
| Fitarwa Voltage | 12-48V | ||||
| Tashoshi | 1CH | 2 CH | 3 CH | 4 CH | 5 CH |
| Sake saita Sauyawa | Ee | Ee | Ee | A'a | A'a |
| Load Yanzu | Max. 11A | Max. 12A | Max. 15A | Max. 15A | Max. 15A |
| Load Power | 132W@12V 240W@24V 288W@36V 384W@48V | 144W@12V 240W@24V 288W@36V 384W@48V | 180W@12V 360W@24V 432W@36V 432W@48V | 180W@12V 288W@24V 360W@36V 480W@48V | 180W@12V 360W@24V 450W@36V 600W@48V |
| Compatible Remote Contro Models | Single-zone: M1A/M1B Multi-zone: M1C/M1D Programmable: M9 | Single-zone: M1A/M1B/M2A/M2B Multi-zone: M1C/M1D/M2C/M2D Programmable: M9 | Single-zone: m1A/M113/m2A/m2B1 M4A/M4B Multi-zone: M1C/M1D/M2C/M2D/ M4C/M4D Programmable: M9 |
Single-zone: m1A/m113/M2A/m2B1 M4A/M4B Multi-zone: M1C/M1D/M2C/M2D/ M4C/M4D Programmable: M9 |
Single-zone: M1A/M1B/m2A/M2B/ M4A/m4B/M5A/M5B Multi-zone: M1C/M1D/M2C/M2D/ M4C/M4D/M5C/M5D Programmable: M9 |
| Kariya | Short circuit protection, over-temperature protection, over-current protection, and reverse connection prevention protection | ||||
| Yanayin Aiki. | -25°C – 50°C | ||||
| Girma | L91 xW37xH21(mm) | ||||
| Girman Kunshin | L94xW39xH22(mm) | ||||
| Nauyi (GW) | 46 g | ||||
Girman samfur
Naúrar: mm
Bayanin Ƙarshe
Tsarin Waya
When P1 is connected to the dimmable light strip
When P2 is connected to the dimmable light strip
When P2 is connected to the color temperature light strip
When P3 is connected to the dimmable light strip
When P3 is connected to the color temperature light strip
When P3 is connected to the RGB light strip
Lura: The control type of PUSH DIM will switch according to the type of the remote control.
When P4 is connected to the dimmable light strip
When P4 is connected to the color temperature light strip
When P4 is connected to the RGB light strip
When P4 is connected to the RGBW light strip
When P5 is connected to the dimmable light strip
When P5 is connected to the color temperature light strip
When P5 is connected to the RGB light strip
When P5 is connected to the RGBW light strip
When P5 is connected to the RGBCW light strip
Haɗa remote ɗin
Pair the remote by using the button
- Short press the ID learning button on the controller and the indicator light flashes. Please complete the following steps within 10 seconds.
- Pair the MINI series remote:
Single-zone MINI remote: Long press the ON/OFF button until the controller’s indicator light flashes fast.
Multi-zone MINI remote: Long press zone button until the controller’s indicator light flashes fast. - When the load light of the controller flashes slowly and then stays on constantly, the learning is successful.
Pair the remote by powering on the controller
- Power off the controller first.
- Pair the MINI series remote:
Single-zone MINI remote: Long press the ON/OFF button and power on the controller at the same time until the controller’s indicator light flashes fast.
Multi-zone MINI remote: Long press zone button and power on the controller at the same time until the controller’s indicator light flashes fast. - When the load light of the controller flashes slowly and then stays on constantly, the learning is successful.
Lura: A controller can be paired with a maximum of 10 remotes. Pairing more than 10 remotes will automatically delete the earliest remote ID codes.
Unpair the remote
Unpair the remote by using the button:
- Delete all remote parings
Long press the ID learning button on the controller for 10 seconds, and then short press it for 6 times. When controller’s indicator light flashes and then stays on, pairing removal is successful. - Delete a single remote paring
Single-zone Mini: Press and hold the ID learning key of the controller for 5 seconds. Within 10 seconds, press the on/off key three times briefly. When the load light flashes slowly and then stays on constantly, the code clearing is successful.
Multi-zone Mini: Press and hold the ID learning key of the controller for 5 seconds. Within 10 seconds, press the zone key three times briefly. When the load light flashes slowly and then stays on constantly, the code clearing is successful.
Unpair the remote by powering on the controller
Delete a single remote paring
Single-zone Mini: Power on the controller for 2 seconds, then power it off for 2 seconds, and power it on again. Press the on/off key three times briefly within 3 seconds. When the load light flashes slowly and then stays on constantly, the code clearing is successful.
Multi-zone Mini: Power on the controller for 2 seconds, then power it off for 2 seconds, and power it on again. Press the zone key three times briefly within 3 seconds. When the load light flashes slowly and then stays on constantly, the code clearing is successful.
Kariyar Shigarwa
Please do not stack the products. The distance between two products should be ≥15cm so as not to aect heat dissipation and the lifespan of the products.
Please do not place the products on the . The distance between the product and the should be ≥100cm so as to avoid signal interference.
Don Allah kar a sanya samfuran kusa da babban yanki na abubuwan ƙarfe (kamar rufin ingarma). Ya kamata tazara tsakanin samfurin da abin ƙarfe ya zama ≥15cm don guje wa tsangwama. 
Don Allah kar a shigar da samfuran akan katako ko kusa da sasanninta. Nisa tsakanin samfurin da katako ko kusurwa ya kamata ya zama ≥15cm don kauce wa tsangwama.
Hankali
- Ya kamata ƙwararren ƙwararren ya yi shigarwa da ƙaddamar da samfur.
- Samfuran LTECH kuma ba masu hana walƙiya ba masu hana ruwa ruwa (sai dai samfuri na musamman). Don Allah a guji rana da ruwan sama. Lokacin shigar da su a waje, da fatan za a tabbatar an ɗora su a cikin wurin da ke da tabbacin ruwa ko kuma a wani yanki da ke da na'urorin kariya na walƙiya.
- Kyakkyawan zafi mai zafi zai tsawaita rayuwar samfurin. Da fatan za a shigar da samfurin a cikin yanayi tare da samun iska mai kyau.
- During installation, avoid being close to large-area metallic objects or stacking the devices, so as to prevent signal interference from affecting the usage.
- Avoid installing in thunderstorm-prone areas, areas with strong magnetic fields, and high-voltage yankunan.
- Lokacin shigar da wannan samfur, da fatan za a guji kasancewa kusa da babban yanki na abubuwan ƙarfe ko tara su don hana tsangwama sigina.
- Da fatan za a duba ko voltage amfani da ya bi ka'idodin siga na samfur.
- Before you power on the product, please make sure all the wiring is correct in case of incorrect connection that may cause a short circuit and damage the components, or trigger a accident.
- Idan kuskure ya faru, don Allah kar a yi ƙoƙarin gyara samfurin da kanka. Idan kuna da wata tambaya, da fatan za a tuntuɓi mai kaya.
- Wannan littafin yana ƙarƙashin canje -canje ba tare da ƙarin sanarwa ba. Ayyukan samfur sun dogara da kaya. Da fatan za a iya tuntuɓar masu rarraba kayan aikin mu idan kuna da wata tambaya.
Lura: The temperature within the installation area should be within the working temperature range of the products. Please do not install products inside LED es to avoid temperature exceeding the working temperature that may aect the product lifetime.
Yarjejeniyar Garanti
Lokacin garanti daga ranar bayarwa: shekaru 5.
Ana ba da sabis na gyara kyauta ko musanya masu inganci a cikin lokacin garanti.
Keɓance garanti a ƙasa:
- Bayan lokutan garanti.
- Duk wani lalacewa ta wucin gadi da babban voltage, fiye da kima, ko ayyuka marasa dacewa.
- Kayayyakin da ke da mummunar lalacewar jiki.
- Lalacewar da bala'o'i ke haifarwa da kuma tilasta majeure.
- An lalata alamun garanti da lambar sirri.
- Babu wata kwangila da LTECH ya sanya hannu.
- Gyara ko sauyawa da aka bayar shine kawai magani ga abokan ciniki. LTECH ba ta da alhaki ga duk wani lahani da ya faru ko kuma ya faru sai dai idan yana cikin doka.
- LTECH yana da hakkin ya gyara ko daidaita sharuɗɗan wannan garanti, kuma sakin a rubuce zai yi nasara.
Abubuwan da aka bayar na ZHUHAI LTECH TECHNOLOGY CO., LTD.
Add: No. 183 , Shui’an 1st Road, Xiangzhou
District, 519060 Zhuhai City
JAMHURIYAR MUTANE NA CHINA
Website: www.ltech-led.com
Takardu / Albarkatu
 |
LTECH P1 RGBCW LED Controller [pdf] Littafin Mai shi P1, P1 RGBCW LED Controller, RGBCW LED Controller, LED Controller, Controller |