P1、P2、P3、P4、P5
DIM/CT/RGB/RGBW/RGBCW LED Pule
- Small size and light weight. The housing is made from V0 flame retardant
- PC materials from SAMSUNG/COVESTRO.
- O galuega fa'alilolilo ma fa'agogo e fa'aleleia atili ai lou fa'amafanafanaga va'aia.
- 2.4GHz wireless signal , eliminating the need for signal wiring.
- 1-5 channel constant voltagu galuega faatino.
- Pulea DIM, CT, RGB, RGBW, RGBCW moli.
- Galulue ma se MINI fa'asologa RF 2.4GHz mamao.
- P3, P4 and P5 have 9 built-in dynamic modes.
- One controller can be paired up with 10 remotes .
- Fa'atasi a'afiaga malosi i le va o fa'atonu i le vaega/sone tutusa.
Fa'amatalaga Fa'apitoa
| Fa'ata'ita'iga | P1 | P2 | P3 | P4 | P5 |
| Faʻaulu | RF2.4GHz | ||||
| Sao Voltage | 12-48V = | ||||
| Galuega Faatino Voltage | 12-48V | ||||
| Auala | 1CH | 2 CH | 3 CH | 4 CH | 5 CH |
| Toe Seti Suiga | Ioe | Ioe | Ioe | Leai | Leai |
| Uta i le taimi nei | Max. 11A | Max. 12A | Max. 15A | Max. 15A | Max. 15A |
| Mana uta | 132W@12V 240W@24V 288W@36V 384W@48V | 144W@12V 240W@24V 288W@36V 384W@48V | 180W@12V 360W@24V 432W@36V 432W@48V | 180W@12V 288W@24V 360W@36V 480W@48V | 180W@12V 360W@24V 450W@36V 600W@48V |
| Compatible Remote Contro Models | Single-zone: M1A/M1B Multi-zone: M1C/M1D Programmable: M9 | Single-zone: M1A/M1B/M2A/M2B Multi-zone: M1C/M1D/M2C/M2D Programmable: M9 | Single-zone: m1A/M113/m2A/m2B1 M4A/M4B Multi-zone: M1C/M1D/M2C/M2D/ M4C/M4D Programmable: M9 |
Single-zone: m1A/m113/M2A/m2B1 M4A/M4B Multi-zone: M1C/M1D/M2C/M2D/ M4C/M4D Programmable: M9 |
Single-zone: M1A/M1B/m2A/M2B/ M4A/m4B/M5A/M5B Multi-zone: M1C/M1D/M2C/M2D/ M4C/M4D/M5C/M5D Programmable: M9 |
| Puipuiga | Short circuit protection, over-temperature protection, over-current protection, and reverse connection prevention protection | ||||
| Galulue Temp. | -25°C – 50°C | ||||
| Fua | L91 xW37xH21(mm) | ||||
| Tele o le afifi | L94xW39xH22(mm) | ||||
| mamafa(GW) | 46g | ||||
Tele o oloa
Iunite: mm
Faamatalaga tigaina
Ata uaea
When P1 is connected to the dimmable light strip
When P2 is connected to the dimmable light strip
When P2 is connected to the color temperature light strip
When P3 is connected to the dimmable light strip
When P3 is connected to the color temperature light strip
When P3 is connected to the RGB light strip
Fa'aaliga: The control type of PUSH DIM will switch according to the type of the remote control.
When P4 is connected to the dimmable light strip
When P4 is connected to the color temperature light strip
When P4 is connected to the RGB light strip
When P4 is connected to the RGBW light strip
When P5 is connected to the dimmable light strip
When P5 is connected to the color temperature light strip
When P5 is connected to the RGB light strip
When P5 is connected to the RGBW light strip
When P5 is connected to the RGBCW light strip
Fa'atasi le mamao
Pair the remote by using the button
- Short press the ID learning button on the controller and the indicator light flashes. Please complete the following steps within 10 seconds.
- Pair the MINI series remote:
Single-zone MINI remote: Long press the ON/OFF button until the controller’s indicator light flashes fast.
Multi-zone MINI remote: Long press zone button until the controller’s indicator light flashes fast. - When the load light of the controller flashes slowly and then stays on constantly, the learning is successful.
Pair the remote by powering on the controller
- Power off the controller first.
- Pair the MINI series remote:
Single-zone MINI remote: Long press the ON/OFF button and power on the controller at the same time until the controller’s indicator light flashes fast.
Multi-zone MINI remote: Long press zone button and power on the controller at the same time until the controller’s indicator light flashes fast. - When the load light of the controller flashes slowly and then stays on constantly, the learning is successful.
Fa'aaliga: A controller can be paired with a maximum of 10 remotes. Pairing more than 10 remotes will automatically delete the earliest remote ID codes.
Unpair the remote
Unpair the remote by using the button:
- Delete all remote parings
Long press the ID learning button on the controller for 10 seconds, and then short press it for 6 times. When controller’s indicator light flashes and then stays on, pairing removal is successful. - Delete a single remote paring
Single-zone Mini: Press and hold the ID learning key of the controller for 5 seconds. Within 10 seconds, press the on/off key three times briefly. When the load light flashes slowly and then stays on constantly, the code clearing is successful.
Multi-zone Mini: Press and hold the ID learning key of the controller for 5 seconds. Within 10 seconds, press the zone key three times briefly. When the load light flashes slowly and then stays on constantly, the code clearing is successful.
Unpair the remote by powering on the controller
Delete a single remote paring
Single-zone Mini: Power on the controller for 2 seconds, then power it off for 2 seconds, and power it on again. Press the on/off key three times briefly within 3 seconds. When the load light flashes slowly and then stays on constantly, the code clearing is successful.
Multi-zone Mini: Power on the controller for 2 seconds, then power it off for 2 seconds, and power it on again. Press the zone key three times briefly within 3 seconds. When the load light flashes slowly and then stays on constantly, the code clearing is successful.
Fa'atonuga Puipuiga
Please do not stack the products. The distance between two products should be ≥15cm so as not to aect heat dissipation and the lifespan of the products.
Please do not place the products on the . The distance between the product and the should be ≥100cm so as to avoid signal interference.
Fa'amolemole 'aua ne'i tu'u oloa i tafatafa o se vaega tele o mea u'amea (e pei o fa'alo fa'auli). O le mamao i le va o le oloa ma le mea uamea e tatau ona ≥15cm ina ia aloese mai faʻalavelave faʻailoga. 
Fa'amolemole aua ne'i fa'apipi'i oloa i luga o fa'alava po'o latalata i tulimanu. O le mamao i le va o le oloa ma le uila poʻo le tulimanu e tatau ona ≥15cm ina ia aloese mai faʻalavelave faʻailoga.
Fa'alogoga
- O le faʻapipiʻiina ma le faʻatulagaina o oloa e tatau ona faia e se tagata tomai faʻapitoa.
- O oloa a le LTECH e sao le uila e le fa'afefeteina (se'i vagana ai fa'ata'ita'iga fa'apitoa). Faamolemole aloese mai le la ma le timu. Pe a fa'apipi'i i fafo, fa'amolemole fa'amautinoa o lo'o fa'apipi'i i totonu o se pa puipui e le vai po'o se nofoaga e fa'apipi'iina ai masini e puipuia ai le uila.
- O le fa'amama lelei o le vevela o le a fa'alauteleina ai le ola o le oloa. Fa'amolemole fa'apipi'i le oloa i se si'osi'omaga e lelei le ea.
- During installation, avoid being close to large-area metallic objects or stacking the devices, so as to prevent signal interference from affecting the usage.
- Avoid installing in thunderstorm-prone areas, areas with strong magnetic fields, and high-voltagu eria.
- A e fa'apipi'i lenei oloa, fa'amolemole 'alofia le latalata atu i se vaega tele o mea u'amea po'o le fa'aputuina ina ia puipuia ai fa'alavelave fa'ailo.
- Faamolemole siaki pe o galue voltage fa'aogaina e fa'amalieina fa'ata'ita'iga mana'oga o le oloa.
- Before you power on the product, please make sure all the wiring is correct in case of incorrect connection that may cause a short circuit and damage the components, or trigger a accident.
- Afai e tupu se faaletonu, faamolemole aua le taumafai e faaleleia le oloa na o oe. Afai ei ai sau fesili, fa'amolemole fa'afeso'ota'i le fa'atau oloa.
- O lenei tusi lesona e noatia i suiga e aunoa ma se faʻaaliga. O oloa gaosi e faʻamoemoe i oloa. Faʻamolemole lagona le saoloto e faʻafesoʻotaʻi a matou ofisa tufatufaina atu pe a i ai sau fesili.
Fa'aaliga: The temperature within the installation area should be within the working temperature range of the products. Please do not install products inside LED es to avoid temperature exceeding the working temperature that may aect the product lifetime.
Tusi saisai
Vaitaimi fa'amaonia mai le aso na tu'uina atu ai: 5 tausaga.
E maua fua le toe fa'aleleia po'o le toe sui o fa'afitauli lelei i totonu ole taimi fa'amaonia.
Tuusaunoa tuʻusaʻo i lalo:
- I tua atu o vaitaimi fa'amaonia.
- So'o se fa'aleagaina fa'afuafua e mafua mai i vol maualugatagu, mamafa tele, po'o fa'agaioiga le talafeagai.
- O oloa e fa'aleagaina fa'aletino.
- Fa'aleagaina e mafua mai i fa'alavelave fa'alenatura ma le force majeure.
- Ua fa'aleagaina igoa fa'amaonia ma barcodes.
- Leai se konekarate na sainia e LTECH.
- Toe fa'aleleia po'o le toe fa'aleleia ua na'o le fofo mo tagata fa'atau. E le noatia le LTECH mo so'o se fa'alavelave fa'afuase'i pe fa'aleagaina se'i vagana ua i totonu o le tulafono.
- E iai le aiā a le LTECH e toe teuteu ai pe fetuutuuna'i aiaiga o lenei tusi saisai, ma o le tu'uina atu i se faiga tusitusia o le a manumalo.
ZHUHAI LTECH TECHNOLOGY CO., LTD.
Add: No. 183 , Shui’an 1st Road, Xiangzhou
District, 519060 Zhuhai City
SAINA TELE
Webnofoaga: www.ltech-led.com
Pepa / Punaoa
 |
LTECH P1 RGBCW LED Controller [pdf] Tusi Lesona a le Pule P1, P1 RGBCW LED Controller, RGBCW LED Controller, LED Controller, Controller |