LTECH P1 RGBCW LED Controller Owner's Manual

The DIM/CT/RGB/RGBW/RGBCW LED Controller is a versatile device
designed to control LED lighting systems with different color
options and functionalities.

Product Usage Instructions:

1. Wiring Connection:

Follow the provided wiring diagram to connect the LED controller
to the dimmable light strip or color temperature light strip based
on the model you are using (P1, P2, P3, P4, or P5). Ensure the
power input is within the specified range (12-48V).

2. Operation:

On/Off: Single click the reset switch to turn
the lights on or off.
Brightness Adjustment: Long press the reset
switch to increase or decrease the brightness.

No Action: Double click the reset switch for
no action.

3. Color Control:

For RGB and RGBW models, use the provided color code to control
the LED outputs based on your desired color combinations.

Frequently Asked Questions (FAQ):

Q: Can I use multiple controllers for a single lighting
setup?

A: Yes, you can use multiple controllers for single-zone or
multi-zone setups by ensuring compatibility with the listed
models.

Q: What protections are included in the LED controller?

A: The LED controller includes short circuit protection,
over-temperature protection, over-current protection, and reverse
connection prevention protection for safe operation.

“`

View Fullscreen

P1P2P3P4P5

DIM/CT/RGB/RGBW/RGBCW LED Controller
Small size and light weight. The housing is made from V0 flame retardant PC materials from SAMSUNG/COVESTRO. Soft-on and fade-in dimming function enhances your visual comfort. 2.4GHz wireless signal , eliminating the need for signal wiring. 1-5 channel constant voltage output. Control DIM, CT, RGB, RGBW, RGBCW light. Work with a MINI series RF 2.4GHz remote. P3, P4 and P5 have 9 built-in dynamic modes. One controller can be paired up with 10 remotes . Sync dynamic effects between controllers in the same group/zone.

Technical Specs

Model Input Signal Input Voltage Output Voltage Channels Reset Switch Load Current

P1 RF2.4GHz 12-48V 12-48V 1 CH Yes Max. 11A

Load Power

132W@12V 240W@24V 288W@36V 384W@48V

P2
2 CH Yes Max. 12A 144W@12V 240W@24V 288W@36V 384W@48V

P3
3 CH Yes Max. 15A 180W@12V 360W@24V 432W@36V 432W@48V

P4
4 CH No Max. 15A 180W@12V 288W@24V 360W@36V 480W@48V

P5
5 CH No Max. 15A 180W@12V 360W@24V 450W@36V 600W@48V

Compatible

Single-zone: M1A/M1B

Remote Control Multi-zone: M1C/M1D

Models

Programmable: M9

Single-zone: M1A/M1B/M2A/M2B Multi-zone: M1C/M1D/M2C/M2D Programmable: M9

Single-zone: M1A/M1B/M2A/M2B/ M4A/M4B Multi-zone: M1C/M1D/M2C/M2D/ M4C/M4D Programmable: M9

Single-zone: M1A/M1B/M2A/M2B/ M4A/M4B/M5A/M5B Multi-zone: M1C/M1D/M2C/M2D/ M4C/M4D/M5C/M5D Programmable: M9

Protection

Short circuit protection, over-temperature protection, over-current protection, and reverse connection prevention protection

Working Temp. -25°C ~ 50°C

Dimension

L91×W37×H21(mm)

Package Size L94×W39×H22(mm)

Weight(G.W.) 46g

Product Size

Unit: mm

21
1

Terminal Description
Running indicator light
Run
ID learning button Match
12-48Vdc power input
Running indicator light
Run
ID learning button Match
12-48Vdc power input
Running indicator light
Run
ID learning button Match
12-48Vdc power input
Running indicator light
Run
ID learning button Match
12-48Vdc power input
Running indicator light
Run
ID learning button Match
12-48Vdc power input

INPUT 12-48V

P1P2P3P4P5

P1 P2 P3 P4 P5
2

OUTPUT W5 W4 W3 W2 W1 CW WW / CW WW CW WW B G R

PUSH DIM 21

OUTPUT

PUSH DIM 21

OUTPUT

W W

LED output+ LED output+ LED output-
LED output-
Reset Switch
DIM|CCT LED output+
W | WW Dim(W1)|Warm color(WW)
LED output+ W | CW
Dim(W2)|Cool color(CW) Reset Switch
DIM|CCT|RGB LED output+
W | WW | R Dim(W1)|Warm color(WW)|Red(R)
W | CW | G Dim(W2)|Cool color(CW)|Green(G)
W| / | B Dim(W3)| / |Blue(B)
Reset Switch
DIM|CCT|RGB|RGBW LED output+ LED output+
W | WW | R | R Dim(W1)|Warm color(WW)|Red(R)
W | CW | G | G Dim(W2)|Cool color(CW)|Green(G)
W | WW | B | B Dim(W3)|Warm color(WW)|Blue(B)
W | CW | / | W Dim(W4)|Cool color(CW)|White(W)
DIM|CCT|RGB|RGBW|RGBCW LED output+
W | WW | R | R | R Dim(W1)|Warm color(WW)|Red(R)
W | CW | G | G | G Dim(W2)|Cool color(CW)|Green(G)
W| / | B | B | B Dim(W3)| / |Blue(B)
W | WW | / | W | WW Dim(W4)|Warm color(WW)|Warm color(WW)
W | CW | / | / | CW Dim(W5)|Cool color(CW)|Cool color(CW)

Wiring Diagram

P1P2P3P4P5

When P1 is connected to the dimmable light strip

Run Match

INPUT 12-48V

M1A/M1B

M1C/M1D

Programmable)

CV driver 12-48Vdc

PUSH DIM 21

OUTPUT

+ –
+ –
Dimmable light strip
Reset switch
Single click: On/Off Long press: Increase/Decrease brightness Double click: No action

When P2 is connected to the dimmable light strip

Run Match

INPUT 12-48V

M1A/M1B

M1C/M1D

Programmable)

PUSH DIM

OUTPUT

W W

+ WW
+ WW
Dimmable light strip
Reset switch
Single click: On/Off Long press: Increase/Decrease brightness Double click: No action

When P2 is connected to the color temperature light strip

Run Match

INPUT 12-48V

M2A/M2B

M2C/M2D

Programmable)

CV driver 12-48Vdc

PUSH DIM

OUTPUT

W W

+ WW CW
+ WW CW
Color temperature LED strip
Reset switch
Single click: On/Off Long press: Increase/Decrease brightness / Increase/Decrease color temperature Double click: Switch mode (brightness/ color temperature)

P1P2P3P4P5

When P3 is connected to the dimmable light strip

Run Match

INPUT 12-48V

M1A/M1B

M1C/M1D

Programmable)

CV driver 12-48Vdc

PUSH DIM 21

+ –
+ –
+ –
Dimmable light strip
Reset switch
Single click: On/Off Long press: Increase/Decrease brightness Double click: No action

When P3 is connected to the color temperature light strip

Run Match

INPUT 12-48V

M2A/M2B

M2C/M2D

Programmable)

When P3 is connected to the RGB light strip

Run Match

INPUT 12-48V

M4A/M4B

M4C/M4D

Programmable)

CV driver 12-48Vdc

PUSH DIM 21

+ CW WW
Color temperature LED strip
Reset switch
Single click: On/Off Long press: Increase/Decrease brightness / Increase/Decrease color temperature Double click: Switch mode (brightness/ color temperature)
+ G R B
RGB light strip
Reset switch
Single click: On/Off Long press: Increase/Decrease brightness / Increase/Decrease RGB values Double click: Switch mode (brightness/RGB)
Note: The control type of PUSH DIM will switch according to the type of the remote control.

P1P2P3P4P5

When P4 is connected to the dimmable light strip

Run Match

INPUT 12-48V

M1A/M1B

M1C/M1D

Programmable)

CV driver 12-48Vdc

+ –
+ –
+ –
+
Dimmable light strip

When P4 is connected to the color temperature light strip

Run Match

INPUT 12-48V

M2A/M2B

M2C/M2D

Programmable)

CV driver 12-48Vdc

+ CW WW
+ CW WW
Color temperature LED strip

When P4 is connected to the RGB light strip

Run Match

INPUT 12-48V

M4A/M4B

M4C/M4D

Programmable)

CV driver 12-48Vdc

+ R G B
RGB light strip

When P4 is connected to the RGBW light strip
Run Match
P4

INPUT 12-48V

M4A/M4B

M4C/M4D

Programmable)

CV driver 12-48Vdc
5

+ R G B W
RGBW light strip

P1P2P3P4P5

When P5 is connected to the dimmable light strip
Run Match
P5

INPUT 12-48V

M1A/M1B M1C/M1D

(Programmable)

CV driver 12-48Vdc

When P5 is connected to the color temperature light strip
Run Match
P5

INPUT 12-48V

M2A/M2B M2C/M2D

(Programmable)

CV driver 12-48Vdc

When P5 is connected to the RGB light strip
Run Match
P5

INPUT 12-48V

M4A/M4B M4C/M4D

(Programmable)

CV driver 12-48Vdc

When P5 is connected to the RGBW light strip
Run Match
P5

INPUT 12-48V

M4A/M4B M4C/M4D

(Programmable)

CV driver 12-48Vdc

When P5 is connected to the RGBCW light strip
Run Match
P5

INPUT 12-48V

M5A/M5B M5C/M5D

(Programmable)

CV driver 12-48Vdc
6

OUTPUT W5 W4 W3 W2 W1 CW WW / CW WW CW WW B G R

+ + + + + –
Dimmable light strip
+ WW CW
+ WW CW
Color temperature LED strip
+ R G B
RGB light strip
+ R G B W
RGBW light strip
+ R G B WW CW
RGBCW light strip

P1P2P3P4P5

Pair the remote

Pair the remote by using the button
1.Short press the ID learning button on the controller and the indicator light flashes. Please complete the following steps within 10 seconds.

ID learning button

2.Pair the MINI series remote:
Single-zone MINI remote: Long press the ON/OFF button until the controller’s indicator light flashes fast. Multi-zone MINI remote: Long press zone button until the controller’s indicator light flashes fast.
3.When the load light of the controller flashes slowly and then stays on constantly, the learning is successful.

Pair the remote by powering on the controller

ON/OFF button

1. Power off the controller first.

2.Pair the MINI series remote:

Single-zone MINI remote: Long press the ON/OFF button and power on the controller at the same time until the controller’s indicator light flashes fast. Multi-zone MINI remote: Long press zone button and power on the controller at the same time until the controller’s indicator light flashes fast.

3.When the load light of the controller flashes slowly and then stays on constantly, the learning is successful.

Single-zone

Zone key Multi-zone

Note: A controller can be paired with a maximum of 10 remotes. Pairing more than 10 remotes will automatically delete the earliest remote ID codes.
Unpair the remote

Unpair the remote by using the button:
1. Delete all remote parings Long press the ID learning button on the controller for 10 seconds, and then short press it for 6 times. When controller’s indicator light flashes and then stays on, pairing removal is successful.
2. Delete a single remote paring
Single-zone Mini: Press and hold the ID learning key of the controller for 5 seconds. Within 10 seconds, press the on/off key three times briefly. When the load light flashes slowly and then stays on constantly, the code clearing is successful. Multi-zone Mini: Press and hold the ID learning key of the controller for 5 seconds. Within 10 seconds, press the zone key three times briefly. When the load light flashes slowly and then stays on constantly, the code clearing is successful.

ID learning button

Unpair the remote by powering on the controller

ON/OFF button

Delete a single remote paring

Single-zone Mini: Power on the controller for 2 seconds, then power it off for 2 seconds, and power it on again. Press the on/off key three times briefly within 3 seconds. When the load light flashes slowly and then stays on constantly, the code clearing is successful. Multi-zone Mini: Power on the controller for 2 seconds, then power it off for 2 seconds, and power it on again. Press the zone key three times briefly within 3 seconds. When the load light flashes slowly and then stays on constantly, the code clearing is successful.

Single-zone

Zone key Multi-zone

Installation Precautions

P1P2P3P4P5

100cm 15cm

15cm

Please do not stack the products. The distance between two products should be 15cm so as not to a ect heat dissipation and the lifespan of the products.

Please do not place the products on the oor. The distance between the product and the oor should be 100cm so as to avoid signal interference.

15cm

15cm 15cm

Please do not place the products near a large area of metal objects (such as metal stud ceilings). The distance between the product and the metal object should be 15cm so as to avoid signal interference.

Please do not install the products on beams or near the corners. The distance between the product and the beam or the corner should be 15cm so as to avoid signal interference.

Note: The temperature within the installation area should be within the working temperature range of the products. Please do not install products inside LED xtures to avoid temperature exceeding the working temperature that may a ect the product lifetime.

Attentions
Product installation and commissioning should be done by a qualified professional. LTECH products are and not lightningproof non-waterproof (special models excepted). Please avoid the sun and rain. When installed outdoors, please ensure they are mounted in a water proof enclosure or in an area equipped with lightning protection devices. Good heat dissipation will extend the life the product. Please install the product in a environment with good ventilation. During installation, avoid being close to large-area metallic objects or stacking the devices, so as to prevent signal interference from affecting the usage. Avoid installing in thunderstorm-prone areas, areas with strong magnetic fields, and high-voltage areas. When you install this product, please avoid being near a large area of metal objects or stacking them to prevent signal interference. Please check whether the working voltage used complies with the parameter requirements of the product. Before you power on the product, please make sure all the wiring is correct in case of incorrect connection that may cause a short circuit and damage the components, or trigger a accident. If a fault occurs, please do not attempt to fix the product by yourself. If you have any question, please contact the supplier.
This manual is subject to changes without further notice. Product functions depend on the goods. Please feel free to contact our official distributors if you have any question.
Warranty Agreement
Warranty periods from the date of delivery : 5 years. Free repair or replacement services for quality problems are provided within warranty periods. Warranty exclusions below:
Beyond warranty periods. Any artificial damage caused by high voltage, overload, or improper operations. Products with severe physical damage. Damage caused by natural disasters and force majeure. Warranty labels and barcodes have been damaged. No any contract signed by LTECH. 1. Repair or replacement provided is the only remedy for customers. LTECH is not liable for any incidental or consequential damage unless it is within the law. 2. LTECH has the right to amend or adjust the terms of this warranty, and release in written form shall prevail.

ZHUHAI LTECH TECHNOLOGY CO., LTD. Add: No. 183 , Shui’an 1st Road, Xiangzhou District, 519060 Zhuhai City, PEOPLE’S REPUBLIC OF CHINA
8

Website: www.ltech-led.com

Documents / Resources

LTECH P1 RGBCW LED Controller [pdf] Owner's Manual
P1, P1 RGBCW LED Controller, RGBCW LED Controller, LED Controller, Controller

References

User Manual

LTECH P1 RGBCW LED Controller Owner’s Manual

P1 RGBCW LED Controller

Specifications:

Product Description:

Product Usage Instructions:

1. Wiring Connection:

2. Operation:

3. Color Control:

Frequently Asked Questions (FAQ):

Q: Can I use multiple controllers for a single lighting
setup?

Q: What protections are included in the LED controller?

Documents / Resources

References

Leave a comment

Cancel reply