DMX4ALL DMX Servo Kudzora 2 RDM Interface Pixel LED Controller Mushandisi Manual

DMX4ALL DMX Servo Kudzora 2 RDM Interface Pixel LED Controller Mushandisi Manual

Kuti iwe pachako uchengetedzeke, ndapota verenga bhuku remushandisi uye yambiro nekungwarira usati waisa.

Zviri mukati hide

6 Servo control chiratidzo

7 Rongedza Servo control chiratidzo

8 RDM

9 DMX-Servo-Kudzora 2

10 Factory Reset

11 Dimensions

12 Zvinyorwa / Zvishandiso

12.1 References

13 Related Posts

Tsanangudzo

Iyo DMX-Servo-Control 2 yakagadzirirwa kudzora maservos maviri kuburikidza neDMX.

Masevhisi maviri
Iyo DMX Servo Control 2 ine maviri servo ports. Imwe neimwe inogona kudzorwa kuburikidza neiyo DMX chiteshi.

Servos ine 5V kusvika ku12V DC inogona kushandiswa
The supply voltage yeDMX-Servo-Control 2 iri pakati pe5V ne12V. Servos ine voltage mukati mechikamu ichi chinogona kubatanidzwa zvakananga.

Inogadziriswa Servo control chiratidzo
Kudzora kunoitika kuburikidza neinogadziriswa pulse wide.

Compact Design
Iyo dhizaini uye iyo compact kuvaka inobvumira kuiswa kweiyi gungano diki munzvimbo dzisingapi nzvimbo yakawanda.

LED-Display
Iyo yakabatanidzwa LED inoratidzira yakawanda yekuratidzira iyo yazvino mudziyo mamiriro.

DMX Addressing
Iyo DMX kero inogadziriswa kuburikidza negumi-nzvimbo DIP switch.

RDM Tsigiro
Iyo DMX Servo Control 2 inobvumira kumisikidzwa kuburikidza neRDM pamusoro peDMX

Data sheet

Magetsi: 5-12V DC 50mA isina servo yakabatana
Protocol: DMX512 RDM
Servo-Voltage: 5-12V DC (inoenderana nekupa voltage)
Servo-Power: max. 3A muhuwandu hwemasevhisi ese ari maviri
DMX-Channels: 2 Channels
Connection: 1x screw terminal / 2pin 1x screw terminal / 3pin 2x 2,54x musoro wepini RM3 / XNUMXpin
Dimension: 30mm x 67mm

Content

1x DMX-Servo-Kudzora 2
1x Kurumidza bhuku reGerman nechirungu

Connection

ATTENTION :
Iyi DMX-Servo-Control 2 HAIZVI ZVINOGIDZWA kune zvikumbiro zvine kuchengetedzwa-zvinoenderana nezvinodiwa kana mune njodzi mamiriro anogona kuitika!

LED-Display

Iyo yakabatanidzwa LED inoratidzira multifunction.

Munguva kune yakajairika mashandiro mode iwo LED mwenje zvachose. Muchiitiko ichi chigadzirwa chiri kushanda.

Uyezve, iyo LED inoratidza mamiriro azvino. Mune ino kesi iyo LED inovhenekera mupfupi pitches uye ipapo inoshaikwa kwenguva yakareba.

Nhamba yemwenje inopenya yakaenzana nenhamba yechiitiko:

Status- Nhamba	Error	Tsanangudzo
1	Hapana DMX	Iko hakuna DMX-Kero
2	Kugadzirisa kukanganisa	Ndokumbira utarise, kana DMX-Start Kero yakagadziridzwa kuburikidza neDIP-Switches
4	Configurationstored	Iyo yakagadziriswa gadziriso inochengetwa

DMX-Addressing

Kero yekutanga inogadziriswa kuburikidza neDIP-Switches.

Shandura 1 ine valency 20 (=1), chinja 2 iyo valency 21 (= 2) uye zvichingodaro kusvika switch9 ine valency 28 (=256).

Huwandu hwema switch anoratidza ON akaenzana nekero yekutanga.

Kero yekutanga yeDMX inogonawo kugadziriswa kuburikidza neiyo RDM parameter DMX_START ADDRESS. Kuti RDM ishande ma switch ese anofanirwa kusetwa kuti ZVIMWE!
Kero Switch

Kero Switch

Servo control chiratidzo

Chiratidzo chinotumirwa kuServo chine High-Impulse uye yakaderera imwe. Iyo pulse nguva yakakosha kune Servo.

Kazhinji kacho mafungiro aya ari pakati pe1ms uye 2ms, iyo zvakare inogadziriswa yeDMX-Servo-Control 2. Iyi ndiyo nzvimbo dzekupedzisira dzeServos apo iyo isingaganhurirwi nemichina. A pulse kureba kwe1.5ms ingave iyo Servo yepakati chinzvimbo.

Rongedza Servo control chiratidzo

Mukuenderana neyakashandiswa Servo inogona kuve advantageous kugadzirisa nguva dzekufungidzira. Iyo shoma nguva yechinzvimbo chekuruboshwe inogona kuiswa mukati meiyo 0,1-2,5ms. Iyo yakanyanya nguva yechinzvimbo chakakodzera inofanira kunge yakakura kupfuura iyo yakaderera nguva uye inogona kunge yakakwira 2,54ms.

Ndokumbira uenderere mberi sekutevera kune zvigadziriso:

Batidza iyo DMX-Servo-Control
Seta DIP-Switch 9 uye 10 pa OFF

Seta DIP-Switch 10 pa ON
Seta kuburikidza neDIP-Switched 1-8 iyo Minimum nguva

Seta DIP-Switch 9 pa ON
Seta kuburikidza neDIP-Switched 1-8 iyo Yakakura nguva

Seta DIP-Switch 10 pa OFF
Iyo LED inovhenekera 4x sesimbiso yekuti zvigadziriso zvakachengetwa

Seta kuburikidza neDIP-Switches 1-9 iyo DMX-Kutanga kero

Iyo nguva-setting inoitika neiyo DMX-Addressing kuburikidza neDIP-Switches muma10µs matanho. Nokudaro kukosha kweseti ne0,01ms kunowedzerwa, saka kune exampLe kukosha kwe 100 kunoguma mukukosha kwe1ms.
Iyo RDM paramita LEFT_ADJUST uye RIGHT_ADJUST inogona kushandiswawo kuseta nguva yekuridza.

RDM

(kubva Hardware V2.1)
RDM ndiyo ipfupi fomu re Remote Device Management.

Pangosvika mudziyo uri mukati meiyo sisitimu, zvigadziriso zvinotsamira pamudziyo zvinoitika kure kuburikidza neRMM command nekuda kweiyo yakasarudzika UID. Kuwana zvakananga kune chigadzirwa hazvidiwi.

Kana kero yekutanga yeDMX ikaiswa kuburikidza neRMM, kero dzese dzinochinja paDMXServo-Control 2 dzinofanirwa kusetwa kuti KUDZIMWA! Kero yekutanga yeDMX yakaiswa nemakero switch inogara iri pamberi!

Ichi chishandiso chinotsigira zvinotevera RDM mirairo:

Parameter ID	Discovery Command	SET Command	GET Command	ANSI / PID
DISC_UNIQUE_BRANCH				E1.20
DISC_MUTE				E1.20
DISC_UN_MUTE				E1.20
DEVICE_INFO				E1.20
SUPPORTED_PARAMETERS				E1.20
PARAMETER_DESCRIPTION				E1.20
SOFTWARE_VERSION_LABEL				E1.20
DMX_START_ADDRESS				E1.20
DEVICE_LABEL				E1.20
MANUFACTURER_LABEL				E1.20
DEVICE_MODEL_DESCRIPTION				E1.20
IDENTIFY_DEVICE				E1.20
DZIMWE DZIDZO				E1.20
DMX_PERSONALITY				E1.20
DMX_PERSONALITY_DESCRIPTION				E1.20
DISPLAY_LEVEL				E1.20
DMX_FAIL_MODE				E1.37

DMX-Servo-Kudzora 2

Parameter ID	Discovery Command	SET Command	GET Command	ANSI / PID
SIRIYERO NHAMBA¹⁾				PID: 0xD400
LEFT_ARJUST¹⁾				PID: 0xD450
KURURAMA_CHINJA¹⁾				PID: 0xD451

Mugadziri anoenderana neRMM yekudzora mirairo (MSC - Mugadziri Chaiyo Type)

Mugadziri zvinoenderana RDM control mirairo:

SIRIYERO NHAMBA
PID: 0xD400

Inoburitsa tsananguro yemavara (ASCII-Text) yeserial nhamba yemudziyo.
GET Send: PDL=0
Gamuchira: PDL=21 (21 Byte ASCII-Chinyorwa)

LEFT_ARJUST
PID: 0xD450

Inoisa iyo yakakwira nguva kureba kwekuruboshwe servo chinzvimbo.
GET Send: PDL=0
Gamuchira: PDL=2 (Izwi 1 LEFT_ADJUST_TIME)

SET Send: PDL=2 (Izwi 1 LEFT_ADJUST_TIME)
Gamuchira: PDL=0

LEFT_ADJUSTTIME
200-5999

Funktion
WERT: x 0,5µs = Impulszeit LINKS
Default: 2000 (1ms)

KURURAMA_CHINJA
PID: 0xD451

Inoseta iyo yakakwira nguva kureba kwekurudyi servo chinzvimbo.
GET Send: PDL=0
Gamuchira: PDL=2 (Izwi 1 RIGHT_ADJUST_TIME)

SET Send: PDL=2 (Izwi 1 RIGHT_ADJUST_TIME)
Gamuchira: PDL=0

LEFT_ADJUST_TIME
201-6000

Funktion
WERT: x 0,5µs = Impulszeit RECHTS
Default: 4000 (2ms)

Factory Reset

Usati waita reset fekitori, verenga matanho ese zvakanyatsonaka

Reset the DMX-Servo-Kudzora 2 kumamiriro ekutumira enderera sezvinotevera:

Dzima mudziyo (Dimbura magetsi!)

Isa kero switch 1 kusvika 10 pa ON
Batidza mudziyo (Batanidza magetsi!)
Ikozvino, iyo LED inopenya 20x mukati meca. 3 seconds
 Nepo iyo LED iri kupenya, isa switch 10 ku OFF

Kugadziriswa kwefekitari ikozvino kwaitwa
 Zvino, iyo LED inopenya ine chiitiko nhamba 4
Dzima mudziyo (Bvisa simba uye USB supply!)
Iyo mudziyo ikozvino inogona kushandiswa.

Kana imwe fekitori reset ichidikanwa, iyi nzira inogona kudzokororwa.

Dimensions

CE-Kuenderana
Iyi gungano (bhodhi) inodzorwa ne microprocessor uye inoshandisa yakakwirira frequency. Kuti uchengetedze zvivakwa zvemodule zvine chekuita neEC kuenderana, kuisirwa mune yakavharwa simbi imba zvinoenderana neEMC kuraira 2014/30 / EU kunodiwa.

Kurasa
Zvigadzirwa zvemagetsi nemagetsi hazvifanirwe kuraswa mumarara epamba. Rasa chigadzirwa pakupera kwehupenyu hwesevhisi maererano nemitemo inoshanda yepamutemo. Ruzivo pamusoro peizvi runogona kuwanikwa kubva kukambani yako yekurasa marara

Yambiro
Chishandiso ichi hachisi chekutambisa. Chengetedza pasingasvikirwi nevana. Vabereki vane mhosva yekukuvadzwa kunokonzeresa kunokonzerwa nekusachengeta vana vavo.

Risk-Notes
Wakatenga chigadzirwa chehunyanzvi. Inopindirana neiyo yakanakisa tekinoroji iripo njodzi dzinotevera hadzifanirwe kusarudzika:

Dambudziko rekukundikana:
Chigadzirwa chacho chinogona kudonha zvishoma kana zvachose chero nguva pasina yambiro. Kuti uderedze mukana wekutadza dhizaini system inodiwa.

Dambudziko rekutanga:
Nekugadzwa kwebhodhi, bhodhi rinofanira kubatanidzwa uye kugadziriswa kune dzimwe nyika zvikamu maererano nepepa rekushandisa. Iri basa rinogona kuitwa chete nevashandi vanokwanisa, vanoverenga yakazara mudziyo mapepa uye vanoinzwisisa.

Dambudziko rekushanda:
Iyo Shanduko kana mashandiro ari pasi peakakosha mamiriro eakaiswa masisitimu / zvikamu zvinogona pamwe nekuremara kwakavanzika kukonzeresa kuparara mukati menguva yekumhanya.

Misusage risk:
Chero kushandiswa kusingaenzaniswi kunogona kukonzera njodzi dzisingaverengeki uye hazvibvumidzwe.

Yambiro: Hazvibvumirwi kushandisa mudziyo mukushanda, uko kuchengetedzeka kwevanhu kunoenderana nechigadzirwa ichi.

DMX4ALL GmbH
Reiterweg 2A
D-44869 Bochum
Jerimani

Kuchinja kwekupedzisira: 20.10.2021

© Copyright DMX4ALL GmbH
All rights reserved. Hapana chikamu chebhuku rino chinokwanisa kutsikiswa nenzira ipi zvayo (photocopy, pressure, microfilm kana neimwewo nzira) pasina mvumo yakanyorwa kana kugadziridzwa, kuwanzwa kana kuparadzirwa pachishandiswa masisitimu emagetsi.

Ruzivo rwese rwuri mubhuku rino rwakarongwa nekuchenjerera kukuru uye mushure meruzivo rwepamusoro. Zvakadaro zvikanganiso zvinofanirwa kubviswa kwete zvachose. Nechikonzero ichi ndinozviona ndichimanikidzwa kuratidza kuti ini handikwanise kutora chero waranti kana mutoro wepamutemo kana chero kunamatira kwemhedzisiro, iyo inodzikira / kudzokera kune isiriyo data. Gwaro iri harina maitiro akavimbiswa. Nhungamiro uye maitiro anogona kuchinjwa chero nguva uye pasina chiziviso chapfuura

Zvinyorwa / Zvishandiso

DMX4ALL DMX Servo Kudzora 2 RDM Interface Pixel LED Controller [pdf] User Manual
DMX Servo Control 2 RDM Interface Pixel LED Controller, DMX Servo, Control 2 RDM Interface Pixel LED Controller, Interface Pixel LED Controller, Pixel LED Controller, LED Controller, Controller

References

User Manual