MICROCHIP AN4229 Risc V Processor Subsystem Guide Guide

Q: O a mea e manaʻomia mo le RT PolarFire?
A: O mea e manaʻomia e aofia ai le 12V/5A AC power adapter ma le uaea, USB 2.0 A i le mini-B cable, ma Micro B USB 2.0 cable.

Q: O le a le faʻaogaina o le vaega ole RT PolarFire?
A: E fa'avae le fa'aogaina o le fa'atonuga ile RISC-V architecture.

Folasaga (Fai se Fesili)

Microchip ofo atu le Mi-V processor IP ma software toolchain e aunoa ma se tau e atiaʻe ai RISC-V processor based designs. O le RISC-V o se faʻataʻitaʻiga faʻataʻitaʻiga matala Seti (ISA) i lalo o le pulega a le RISC-V faavae. E ofoina atu le tele o faʻamanuiaga, e aofia ai le faʻatagaina o tagata lautele e suʻe ma faʻaleleia cores i se saoasaoa vave nai lo ISA tapunia. RT PolarFire® Field Programmable Gate Array (FPGAs) lagolago Mi-V soft processors e fa'atino ai talosaga a tagata. O lenei tusi talosaga o loʻo faʻamatalaina pe faʻafefea ona fausia se Mi-V processor subsystem e faʻatino ai se talosaga a le tagata faʻaoga mai le TCM ua filifilia na amata mai le SPI Flash.

Fuafuaga Manaomia (Fai se Fesili)
O le laulau o lo'o i lalo o lo'o lisiina ai mea e mana'omia ma masini komepiuta mo le fausiaina o le Mi-V processor subsystem.

Laulau 1-1. Fuafuaga Manaomia

Manaoga	Fa'amatalaga
Meafaigaluega Manaomia
RT PolarFire® Atina'e Kit (RTPF500TS-1CG1509M) 12V/5A AC fa'afeso'ota'i eletise ma uaea USB 2.0 A i le mini-B uaea Micro B USB 2.0 uaea	FAAALIGA 1.0
Polokalama Manaoga
Libero® SoC FlashPro Express SoftConsole	Va'ai le readme.txt file i le mamanu files mo fa'aliliuga polokalama uma e mana'omia e fatu ai le mamanu fa'asinomaga Mi-V

Fuafuaga Manaomia (Fai se Fesili)

Ae e te leʻi amataina, fai laasaga nei:

La'u mai le mamanu fa'asino files mai le RT PolarFire: Fausiaina RISC-V Processer Subsystem.

Tikia ma fa'apipi'i le Libero® SoC mai le so'otaga lea: Libero SoC v2024.1 po'o mulimuli ane.

Fa'amatalaga Fa'atusa (Fa'ai se Fesili)

MIV_RV32 ose fa'atonuga autu ua fuafuaina e fa'atino le seti fa'atonuga RISC-V. E mafai ona fa'atulagaina le 'autu ina ia iai feso'ota'iga AHB, APB3, ma le AXI3/4 pasi mo fa'aoga i totonu ma manatua. O le ata o loʻo i lalo o loʻo faʻaalia ai le faʻataʻitaʻiga poloka pito i luga o le Mi-V subsystem na fausia ile RT PolarFire® FPGA.

O le talosaga a le tagata e fa'atinoina i luga o le Mi-V processor e mafai ona teuina i totonu ole SPI Flash fafo. I le fa'aosoina o masini, e fa'amataina e le pule fa'atonu le TCM fa'atulagaina ma le fa'aoga a le tagata fa'aoga. E fa'amatu'u mai le Fa'atonu Fa'atonu pe a mae'a le amataga o le TCM. Afai o loʻo teuina le faʻaoga faʻaoga i le SPI Flash, e faʻaogaina e le System Controller le SC_SPI interface mo le faitauina o le tagata faʻaoga talosaga mai le SPI Flash. O le talosaga a le tagata fa'aoga tu'uina atu e lolomi le savali UART "Talofa Lalolagi!" ma emo fa'aoga LED i luga o le laupapa.

Fa'atinoga o Meafaigaluega (Fai se Fesili)

O le ata o loʻo i lalo o loʻo faʻaalia ai le mamanu Libero o le Mi-V processor subsystem.

IP Blocks (Fai se Fesili)
O le laulau o loʻo i lalo o loʻo lisiina ai poloka IP o loʻo faʻaaogaina i le Mi-V processor subsystem reference design ma a latou galuega.

Laulau 4-1. IP Blocks Fa'amatalaga

IP Igoa	Fa'amatalaga
INIT_MONITOR	O le RT PolarFire® Initialization Monitor e maua ai le tulaga o le masini ma le mafaufau amata
reset_syn	Ole CORERESET_PF IP instantiation lea e fa'atupuina ai le fa'atulagaina o le fa'atulagaina o le fa'atulagaina mo le Mi-V subsystem.
CCC_0	O le RT PolarFire Clock Conditioning Circuitry (CCC) poloka e ave se uati fa'aoga o le 160 MHz mai le poloka PF_OSC ma fa'atupuina ai le 83.33 MHz ie uati mo le Mi-V processor subsystem ma isi peripherals.
MIV_RV32_C0 (Mi-V Soft Processor IP)	Ole tau ole Mi-V soft processor Reset Vector Address ole 0✕8000_0000. A maeʻa le toe setiina o le masini, e faʻatino e le processor le talosaga mai le 0✕8000_0000. O le TCM o le manatua autu lea o le Mi-V processor ma o lo'o fa'afanua le manatua ile 0✕8000_0000. O le TCM e amataina i le faʻaoga faʻaoga o loʻo teuina i le SPI Flash. I le Mi-V processor memory map, o le 0✕8000_0000 i le 0✕8000_FFFF laina o loʻo faʻamatalaina mo le TCM faʻaoga faʻaoga ma le 0✕7000_0000 i le 0✕7FFF_FFFF laina faʻamatalaina mo le APB interface.
MIV_ESS_C0_0	O lenei MIV Extended Subsystem (ESS) o lo'o fa'aogaina e lagolago ai le GPIO ma le UART
CoreSPI_C0_0	CoreSPI e faʻaaogaina e faʻapipiʻi ai le SPI Flash fafo
PF_SPI	PF_SPI macro fa'afeso'ota'i le manatu ie i le SPI Flash fafo, lea e feso'ota'i i le Pule Fa'atonu
PF_OSC	PF_OSC o se oscillator i luga o le laupapa lea e gaosia 160 MHz uati galuega

Taua: O ta'iala ma tusitaulima uma o lo'o maua mai le Libero SoC> Catalog

Fa'afanua Fa'amanatu (Fai se Fesili)
O le laulau o lo'o i lalo o lo'o lisiina ai le fa'afanua manatua o mea e manatua ma peripheral.

Laulau 4-2. Fa'amatalaga o le Fa'afanua

Peripherals	Tulaga Amata
TCM	0x8000_0000
MIV_ESS_UART	0x7100_0000
MIV_ESS_GPIO	0x7500_0000

Polokalama Fa'atinoga (Fa'ai se Fesili)

Microchip e tu'uina atu le filifili meafaigaluega SoftConsole e fausia ai se RISC-V fa'aoga talosaga e mafai ona fa'atinoina (.hex) file ma debug ai. Le mamanu faasinomaga files aofia ai le Firmware workspace o loʻo i ai le MiV_uart_blinky software project. O le MiV_uart_blinky user application o lo'o fa'apolokalameina i luga ole SPI Flash i fafo e fa'aaoga ai le Libero® SoC. O le talosaga a le tagata fa'aoga tu'uina atu e lolomi le savali UART "Talofa Lalolagi!" ma emo fa'aoga LED i luga o le laupapa.

E tusa ai ma le Libero SoC design memory map, o le UART ma le GPIO tuatusi pito i luga o loʻo faʻafanua i le 0x71000000 ma le 0x75000000, i le faasologa. O lenei faʻamatalaga o loʻo tuʻuina atu i le hw_platform.h file e pei ona faaalia i le ata lea.

E tatau ona fa'atino le talosaga a le tagata fa'aoga mai le manatua TCM (fa'ailoga, fa'amaumauga, ma fa'aputuga). O le mea lea, o le RAM tuatusi i le linker script ua seti i le tuatusi amata o le TCM manatua e pei ona faʻaalia i le ata o loʻo i lalo.

O lo'o maua le fa'amaumauga o feso'ota'iga (miv-rv32-ram.ld) ile FW\MiV_uart_blinky\miv_rv32_hal folder o le mamanu. files. Ina ia fausia le tagata faʻaoga talosaga, fai laasaga nei:

Fausia se poloketi Mi-V SoftConsole
La'u mai le MIV_RV32 HAL files ma avetaʻavale mai GitHub faʻaogaina le fesoʻotaʻiga e pei ona taua i lalo: github.com/Mi-V-Soft-RISC-V/platform
Fa'aulufale mai aveta'avale firmware
Fausia le autu.c file fa'atasi ai ma le numera o talosaga
Fa'afanua ta'avale firmware ma le fa'asinomaga feso'ota'i
Fa'afanua manatua ma tuatusi pito
Fausia le talosaga

Mo nisi fa'amatalaga e uiga i laasaga nei, va'ai AN4997: PolarFire FPGA Fausiaina o le Mi-V Processor Subsystem. O le .hex file e faia pe a maeʻa le fausiaina ma e faʻaaogaina mo le faʻatulagaina ma le faʻatulagaina o mafaufauga i le Running the Demo.

Seti le Demo (Fai se Fesili)

Ina ia seti le demo, fai laasaga nei:

Fa'atulagaina o Meafaigaluega
Fa'atulaga le Fa'ailoga Fa'asologa (Tera Term)

Fa'atulagaina o Meafaigaluega (Fai se Fesili)
Taua: O le fa'aogaina o le fa'aogaina o le talosaga a le Mi-V e fa'aaoga ai le SoftConsole debugger o le a le aoga pe a fa'aogaina le Faiga Fa'atonu a le Pule Fa'atonu. O le System Controller Suspend Mode ua le atoatoa mo lenei mamanu e faʻaalia ai le faʻaogaina o le Mi-V.

Ina ia setiina meafaigaluega, fai laasaga nei:

Fa'amalo le laupapa e fa'aaoga ai le ki SW7.

Tatala le J31 jumper e fa'aoga ai le FlashPro programmer po'o Close J31 jumper e fa'aoga ai le FlashPro programmer.
Taua: Embedded Flash Pro Programmer e mafai ona faʻaaogaina mo Polokalama e ala i le Libero poʻo le FPExpress e le mafai ona faʻaogaina mo le faʻaogaina o le Talosaga faʻavae Mi-V.
Faʻafesoʻotaʻi le PC talimalo ile fesoʻotaʻiga J24 e faʻaaoga ai le USB cable.
Ina ia mafai ai le SC_SPI, 1-2 pine o le jumper J8 e tatau ona tapuni.

Fa'afeso'ota'i le polokalame FlashPro i le feso'ota'iga J3 (JTAG ulutala) ma faʻaoga se isi uaea USB e faʻafesoʻotaʻi ai le FlashPro programmer i le Host PC.
Ia mautinoa o le USB i UART alalaupapa avetaʻavale e otometi lava ona iloa, lea e mafai ona faʻamaonia e ala i le pule o masini i luga o le PC talimalo.
Taua: E pei ona fa'aalia i le Ata 6-1, o lo'o fa'aalia e le uafu meatotino a le COM16 o lo'o feso'ota'i atu i le telefoni feavea'i USB. O le mea lea, COM16 ua filifilia i lenei example. Ole numera ole tau ole COM e fa'apitoa ile faiga. Afai e le faʻapipiʻiina le USB i UART bridge drivers, download ma faʻapipiʻi avetaavale mai www.microchip.com/en-us/product/mcp2200.
Fa'afeso'ota'i le sapalai eletise i le feso'ota'iga J19 ma sui ON le sapalai eletise e fa'aaoga ai le ki SW7.

Fa'atonuina le Fa'ailoga Fa'asologa (Tera Term) (Fa'ai se Fesili)
Le fa'aoga fa'aoga (MiV_uart_blinky.hex file) lolomi le “Talofa Lalolagi!” savali i luga o le laina laina e ala i le UART interface.

Ina ia setiina le laina laina, fai laasaga nei:

Tatala Tera Term i luga ole Host PC.
Filifili le COM Port ua iloa i Tera Term e pei ona faʻaalia i le ata o loʻo i lalo.
Mai le Menu bar, filifili Setup> Serial port e faʻatutu ai le COM port.

Seti le Saosaoa (baud) i le 115200 ma le Flow Control i le leai ma kiliki i luga o le New set option e pei ona faʻaalia i le ata o loʻo i lalo.

A maeʻa ona faʻatulagaina le laina telefoni, o le isi laasaga o le faʻapipiʻiina lea o le RT PolarFire® masini.

Fa'atino le Fa'ata'ita'iga (Fai se Fesili)

Ina ia faʻagasolo le demo, fai laasaga nei:

Fausia le TCM Initialization Client
Polokalama le RT PolarFire® Device
Fausia le SPI Flash Image

Polokalama le SPI Flash

Fausiaina o le TCM Initialization Client (Fai se Fesili)
Ina ia amataina le TCM i le RT PolarFire® e faʻaaoga ai le faʻatonuina o le system, o se faʻalapotopotoga faʻapitonuʻu l_cfg_hard_tcm0_en i le miv_rv32_subsys_pkg.v file e tatau ona suia i le 1'b1 a'o le'i Fa'atasi. Mo nisi fa'amatalaga, va'ai le MIV_RV32 User Guide.

I le Libero® SoC, o le Configure Design Initialization Data and Memories option e faʻatupuina ai le TCM initialization client ma faʻaopoopo i le sNVM, μPROM, poʻo se SPI Flash fafo, e faʻavae i luga o le ituaiga o manatua e le faʻafefe ua filifilia. I lenei tusi talosaga, o le TCM initialization client o loʻo teuina i le SPI Flash. O lenei fa'agasologa e mana'omia ai le fa'aogaina o le talosaga a le tagata fa'aoga file (.hex file). Le hex file (*.hex) e fa'atupuina ile fa'aogaina ole Poloketi talosaga SoftConsole. A sample tagata fa'aoga talosaga ua tu'uina atu fa'atasi ma le mamanu files. Le fa'aoga fa'aoga file (.hex) ua filifilia mo le fatuina o le TCM initialization client e fa'aaoga ai laasaga nei:

Tatala Libero® SoC ma fa'agasolo le script.tcl (Fa'aopoopo 2: Fa'agasolo le TCL Script).
Filifili Fa'atulaga Fuafuaga Initialization Fa'amatalaga ma Fa'amanatu> Libero Design Flow.
I luga o le Fabric RAMs tab, filifili le TCM instance ma faalua-kiliki i luga e tatala ai le Edit Fabric RAM Initialization Client dialog box, e pei ona faʻaalia i le ata o loʻo i lalo.

I le Edit Fabric RAM Initialization Client dialog box, seti le ituaiga teuina i le SPI-Flash. Ona, filifili Content mai file ma kiliki le Fa'aulufale mai (...) faamau e pei ona fa'aalia i le ata o lo'o i lalo.

Polokalama le RT PolarFire Device (Fai se Fesili)

Le mamanu faasinomaga files aofia ai le Mi-V processor subsystem poloketi na fausia e fa'aaoga ai le Libero® SoC. O le RT PolarFire® masini e mafai ona faʻapipiʻiina e faʻaaoga ai le Libero SoC.

Ole faʻasologa ole mamanu o le Libero SoC o loʻo faʻaalia ile ata o loʻo i lalo.

Ina ia faʻapipiʻi le RT PolarFire masini, tatala le Mi-V processor subsystem Libero poloketi, lea e faʻaaogaina e faʻaaoga ai tusitusiga TCL tuʻuina atu i Libero SoC, ma kiliki-lua Run Program Action.

Fausiaina o le SPI Flash Ata (Fa'ai se Fesili)

Ina ia fa'atupuina le ata SPI Flash, kiliki fa'alua Fa'atupu SPI Flash Ata i luga o le Fa'ailoga Fa'asologa.
A fa'atupuina ma le manuia le ata o le SPI Flash, e aliali mai se fa'ailoga lanu meamata i tafatafa o le Fa'atupu SPI Flash Ata.

Polokalama o le SPI Flash (Fai se Fesili)
Ina ia faʻapipiʻi le ata SPI Flash, fai laasaga nei:

Kiliki fa'alua le Run PROGRAM_SPI_IMAGE i luga o le fa'ailoga Fa'asolo.
Kiliki le Ioe i le pusa talatalanoa.

A fa'apolokalame lelei le ata SPI i le masini, e fa'ailoa mai se fa'ailoga lanu meamata i tafatafa o le Run PROGRAM_SPI_IMAGE.

A mae'a polokalame SPI Flash, ua sauni le TCM. O le i'uga, e emo LEDs 1, 2, 3, ma le 4, ona va'aia lea o lomitusi i luga o le laina fa'asologa, e pei ona fa'aalia i le ata o lo'o mulimuli mai.

E fa'ai'u ai le demo.
O le RT PolarFire® masini ma le SPI Flash e mafai foi ona faʻapipiʻiina e faʻaaoga ai le FlashPro Express, vaʻai Faʻaopoopoga 1: Polokalama le RT PolarFire Device ma le SPI Flash Faʻaaogaina FlashPro Express.

Fa'aopoopo 1: Fa'apolokalameina le RT PolarFire Device ma le SPI Flash Fa'aaogā le FlashPro Express (Fesili se Fesili)

Le mamanu faasinomaga files aofia ai se galuega polokalame file mo le faʻatulagaina o le RT PolarFire® masini e faʻaaoga ai le FlashPro Express. Le galuega lenei file e aofia ai foi le ata SPI Flash, o le TCM initialization client. FlashPro Express polokalame uma le RT PolarFire masini ma le SPI Flash i lenei polokalame .job file. Le polokalame .job file e maua ile DesignFiles_directory\Programming_files.

Fa'apolokalame le masini RT PolarFire ma le polokalame file fa'aaoga le FlashPro Express, fai laasaga nei:

Seti meafaigaluega, taga'i Set Up the Hardware.
I luga o le PC talimalo, faʻalauiloa le polokalama FlashPro Express.

Ina ia fatuina se galuega fou, kiliki New pe filifili New Job Project mai le FlashPro Express Job mai le lisi o Poloketi.
Ulufale mea nei i le pusa fa'atalanoa:
- Galuega fa'apolokalame file: Kiliki Su'esu'e ma fa'asaga i le nofoaga o lo'o i ai le .job file o lo'o i ai ma filifili le file. Le galuega file e maua ile DesignFiles_directory\Programming_files.
- FlashPro Express galuega poloketi nofoaga: Kiliki Su'esu'e ma fa'afeiloa'i i le nofoaga e te mana'o e teu ai le poloketi.
Kiliki OK. Polokalame manaʻomia file ua filifilia ma sauni e fa'apolokalameina.
O le faʻamalama FlashPro Express e faʻaalia e pei ona faʻaalia i le ata o loʻo i lalo. Faʻamaonia o loʻo faʻaalia se numera o le polokalame i le fanua Programmer. Afai e leai, siaki le laupapa feso'ota'iga ma kiliki Toe Fa'afouina/Rescan Programmers.

Kiliki RUN. A fa'apolokalame lelei le masini, e fa'aalia se tulaga RUN PASSED e pei ona fa'aalia i le ata o lo'o mulimuli mai.

E fa'ai'u ai le masini RT PolarFire ma le polokalame SPI Flash. A uma le faʻatulagaina o le laupapa, mataʻituina le "Talofa Lalolagi!" fe'au lolomi i luga o le UART terminal ma le emo o tagata fa'aoga LED.

Fa'aopoopo 2: Fa'agaoioi le TCL Script (Fa'ai se Fesili)

TCL tusitusiga o loʻo tuʻuina atu i le mamanu files faila i lalo o le directory HW. Afai e mana'omia, e mafai ona toe faia le fa'asologa o mamanu mai le Design Implementation se'ia o'o i le fa'atupuina o galuega file.

Ina ia faʻatautaia le TCL, fai laasaga nei:

Tatala le polokalame Libero.
Filifili Poloketi > Fa'atino Script....

Kiliki Su'esu'e ma filifili le script.tcl mai le lisi o le HW na sii mai.
Kiliki Run.

A maeʻa le faʻataunuʻuina o le TCL script, ua fausia le poloketi Libero i totonu o le HW directory.

Mo nisi fa'amatalaga e uiga i tusitusiga TCL, va'ai rtpf_an4229_df/HW/TCL_Script_readme.txt. Mo nisi fa'amatalaga ile TCL commands, va'ai Tcl Commands Reference Guide. Fa'afeso'ota'i le Microchip
Lagolago Fa'atekinisi mo so'o se fa'afesili e feagai, a'o fa'agasolo le TCL script.

Toe Iloilo Tala'aga (Fai se Fesili)

O lo'o fa'amatala e le laulau o tala fa'asolopito suiga na fa'atinoina i totonu o le pepa. O suiga o lo'o lisiina e ala i toe iloiloga, amata i le lomiga aupito lata mai.

Laulau 10-1. Toe Iloilo Tala'aga

Toe Iloiloga	Aso	Fa'amatalaga
B	10/2024	O le lisi lea o suiga na faia i le toe iloiloga B o le pepa: Fa'afou le toe iloiloga a le komiti i le Laulau 1-1 Faʻaopoopo le Mi-V ESS ma CoreSPI i le Ata 3-1 i le vaega o Faʻamatalaga Faʻamatalaga Fa'aopoopo poloka MIV_ESS_C0_0 ma CoreSPI_C0_0 i le Laulau 4-1 ile vaega ole IP Blocks Fa'afou le tau o le tuatusi Amata ile Laulau 4-2 Fa'afou le Ata 5-1 ma le Ata 5-2 ile vaega ole Fa'atinoina ole Polokalama Faʻaopoopoina se faʻamatalaga e uiga i le faʻaogaina o le faʻaogaina o le faʻaogaina o le faʻaogaina, faʻaopoopo le faʻapipiʻiina o le faʻaogaina o le SPI Enable ma le FlashPro polokalame (pe faʻapipiʻi pe fafo) i laʻasaga i le Set Up the Hardware section Fa'afouina Ata 6-1, Ata 6-2, ma le Ata 6-3 i le Fa'atulagaina o le Fa'asologa o le Serial Terminal (Tera Term) vaega. Fa'afouina Ata 7-1 ma le Ata 7-2 i le vaega Fa'atupuina o le TCM Initialization Client Faʻafouina Ata 7-4 i le Polokalama o le SPI Flash vaega Fa'aopoopoina Fa'aopoopo 2: Fa'agaoioi le vaega TCL Script
A	10/2021	Le lomiga muamua o lenei pepa

Microchip FPGA Lagolago

Microchip FPGA products group backs its products with various support services, including Customer Service, Customer Technical Support Center, a webnofoaga, ma ofisa faatau i le lalolagi atoa. E fautuaina tagata fa'atau e asiasi i Microchip i luga ole laiga a'o le'i fa'afeso'ota'i le lagolago ona e foliga mai ua uma ona tali a latou fesili.

Fa'afeso'ota'i le Nofoaga Autu Lagolago Fa'apitoa e ala ile webnofoaga i www.microchip.com/support. Ta'u le numera o le Vaega o Meafaigaluega FPGA, filifili le vaega o mataupu talafeagai, ma fa'apipi'i le mamanu files a'o faia se mataupu lagolago fa'apitoa.
Fa'afeso'ota'i Auaunaga Fa'atau mo le lagolago o oloa e le fa'apitoa, e pei o le tau o oloa, fa'aleleia o oloa, fa'afouga fa'amatalaga, tulaga oka, ma le fa'atagaina.

Mai Amerika i Matu, valaau 800.262.1060
Mai le lalolagi atoa, valaau 650.318.4460

Fax, mai so'o se mea i le lalolagi, 650.318.8044

Microchip Fa'amatalaga

Le Microchip Webnofoaga
Microchip e maua le lagolago i luga ole laiga e ala i la matou webnofoaga i www.microchip.com/. Lenei web'upega tafa'ilagi e fa'aoga e fai ai files ma fa'amatalaga faigofie ona maua e tagata fa'atau. O nisi o mea e maua e aofia ai:

Lagolago oloa - Pepa faʻamatalaga ma mea sese, faʻamatalaga talosaga ma samppolokalame, punaoa mamanu, ta'iala a le tagata fa'aoga ma pepa lagolago mo meafaigaluega, fa'asalalauga fou fa'akomepiuta ma polokalama fa'amaumauga
Lagolago Faʻatekinisi Lautele - Fesili e masani ona fesiligia (FAQs), talosaga lagolago faʻapitoa, faʻasalalauga i luga ole laiga, Microchip design partner programme list
Pisinisi o Microchip - Faʻatau oloa ma taʻiala faʻatonu, faʻasalalauga lata mai a Microchip, lisi o semina ma mea na tutupu, lisi o ofisa faʻatau Microchip, tufatufaina ma sui fale gaosimea

Au'aunaga Fa'asilasilaga Suiga o Mea

O le auaunaga fa'asilasilaga suiga o oloa a Microchip e fesoasoani e fa'amautu ai tagata fa'atau i oloa Microchip. O le a maua e le au fai saofaga le faʻamatalaga imeli i soʻo se taimi e iai suiga, faʻafouga, toe teuteuga poʻo mea sese e fesoʻotaʻi ma se aiga o oloa faʻapitoa poʻo meafaigaluega atinaʻe e fiafia i ai.
Ina ia lesitala, alu i www.microchip.com/pcn ma mulimuli i faatonuga o le resitalaina.

Lagolago Tagata Fa'atau
O tagata fa'aoga o oloa Microchip e mafai ona maua fesoasoani e ala i le tele o auala:

Fa'asoa po'o le Sui
Ofisa Fa'atauga Fa'alotoifale

Embedded Solutions Engineer (ESE)
Lagolago Fa'atekinisi

E tatau i tagata fa'atau ona fa'afeso'ota'i le latou tufatufaina, sui po'o le ESE mo le lagolago. O loʻo avanoa foʻi ofisa faʻatau i le lotoifale e fesoasoani i tagata faʻatau. O lo'o iai se lisi o ofisa fa'atau ma nofoaga i totonu o lenei pepa.

E maua le lagolago fa'apitoa e ala ile webnofoaga i: www.microchip.com/support

Fa'ailoga Puipuiga o Fa'ailoga Fa'atonu a Microchip
Manatua faʻamatalaga o loʻo i lalo o le faʻaogaina o le puipuiga o tulafono i luga o oloa Microchip:

O oloa Microchip e fetaui ma faʻamatalaga o loʻo i totonu o la latou Pepa Faʻamatalaga Microchip.

E talitonu Microchip o lona aiga o oloa e saogalemu pe a faʻaaogaina i le auala faʻamoemoeina, i totonu o faʻamatalaga faʻaogaina, ma i lalo o tulaga masani.
Microchip fa'atauaina ma puipuia fa'amalosi ana aia tatau tau meatotino. O taumafaiga e soli le tulafono o le puipuiga o le oloa Microchip e matua fa'asaina ma e ono solia ai le Digital Millennium Copyright Act.
E le mafai e le Microchip poʻo se isi mea gaosi semiconductor ona faʻamaonia le saogalemu o lana tulafono. O le puipuiga o tulafono laiti e le o lona uiga tatou te faʻamautinoa o le oloa e "le mafai ona motusia". O le puipuiga o tulafono laiti o lo'o fa'asolosolo pea. Microchip ua tuuto atu i le faʻaauauina pea o le faʻaleleia atili o uiga puipuia o tulafono a tatou oloa.

Faasilasilaga Faaletulafono
O lenei lomiga ma faʻamatalaga o loʻo i totonu e mafai ona faʻaaogaina i oloa Microchip, e aofia ai le mamanu, suʻega, ma tuʻufaʻatasia oloa Microchip ma lau talosaga. Faʻaaogaina o lenei faʻamatalaga
i so'o se isi lava faiga ua solia ai nei aiaiga. O fa'amatalaga e uiga i le fa'aogaina o masini e tu'uina atu mo na'o lou fa'amalieina ma e ono suia i fa'afouga. O lau matafaioi le faʻamautinoa o lau talosaga e fetaui ma au faʻamatalaga. Fa'afeso'ota'i lou ofisa fa'atau Microchip fa'apitonu'u mo se lagolago fa'aopoopo pe, maua se lagolago fa'aopoopo ile www.microchip.com/en-us/support/design-help/client-support-services.

O LENEI FAʻAMATALAGA E TUUINA E MICROCHIP "AS IS". E LEAI FAIA e le MICROCHIP ni sui po'o se fa'amaoniga o so'o se ituaiga pe fa'aalia pe fa'aali, tusia pe tugutu, tulāfono po'o se isi mea, e feso'ota'i ma fa'amatalaga e aofia ai ae le tapula'a i so'o se fa'amaoniaga fa'amaonia, fa'amaonia, ma le fa'amaoniaina. FAAMOEMOEGA, POO WARRANTY E FAI I ONA TULAGA, TULAGA, POO LE FAIGALUEGA.

E LEAI SE MEA E TATAU AI MICROCHIP MO SO'O SE FA'AMATALAGA, FA'AMATALAGA, FA'ASA'OGA, FA'AMATALAGA, PO'O LE FA'A'ALI'AGA MA'U'U, FA'AFIA, TAU, PO'O LE TU'U'UINA O SO'O SE I'UGA SO'O SE FA'AIGA I LE FA'AMATALAGA POO LONA FA'A'OGA, PE'O LE MEA NA FA'AUPUNA'I, E tusa lava pe fa'aletonu. FA'ATONU POO LE FA'AFIA E FA'AVAEINA. I LE AGATOGA FA'AALIGA E LE TULAFONO, O LE UMA AOFA'IGA A MICROCHIP I TOTOGI UMA I SO'O SE AUALA E FA'AIGA I LE FA'AMATALAGA POO LONA FA'A'OGA E LE'A LOLOA I LE TOTOGI O TOTOGI, AFAI E IAI, NA E TOTOGI SA'O I LE MICROCHIP MO LE FA'AMATALAGA.

O le fa'aogaina o masini Microchip i le tausiga o le ola ma/po'o le saogalemu o lo'o i le tulaga lamatia o le tagata fa'atau, ma e malie le tagata fa'atau e puipuia, fa'aleaga ma taofia Microchip le afaina mai so'o se mea leaga, tagi, suti, po'o tupe alu e mafua mai i lea fa'aoga. E leai ni laisene e tu'uina atu, fa'aalia po'o se isi mea, i lalo o so'o se Microchip aia tatau tau le atamai se'i vagana ua ta'ua.

Fa'ailoga Fa'ailoga
Le igoa Microchip ma le logo, le Microchip logo, Adaptec, AVR, AVR logo, AVR Freaks, BesTime, BitCloud, CryptoMemory, CryptoRF, dsPIC, flexPWR, HELDO, IGLOO, JukeBlox, KeeLoq, Kleer, LANCheck, LinkMD, maXStylus, maXTouch MediaLB, megaAVR, Microsemi, Microsemi logo, MOST, MOST logo, MPLAB, OptoLyzer, PIC, picoPower, PICSTART, PIC32 logo, PolarFire, Prochip Designer, QTouch, SAM-BA, SenGenuity, SpyNIC, SST, SST Logo, SuperFlash, Symmetricom , SyncServer, Tachyon, TimeSource, tinyAVR, UNI/O, Vectron, ma XMEGA o fa'ailoga fa'amaufa'ailoga a Microchip Technology Incorporated i Amerika ma isi atunu'u.

AgileSwitch, ClockWorks, The Embedded Control Solutions Company, EtherSynch, Flashtec, Hyper Speed Control, HyperLight Load, Libero, motorBench, mTouch, Powermite 3, Precision Edge, ProASIC, ProASIC Plus, ProASIC Plus logo, Quiet-Wire, SmartFusion, SyncWorld, TimeCesium, TimeHub, TimePictra, TimeProvider, ma ZL o faʻailoga resitalaina o Microchip Technology Incorporated i Amerika.

Taofi Fa'aigoa Fa'atasi, AKS, Analog-mo-le-Digital Age, So'o se Capacitor, So'o se In, So'o'Out, Suiga Fa'aopoopo, BlueSky, BodyCom, Clockstudio, CodeGuard, CryptoAuthentication, CryptoAutomotive, CryptoCompanion, CryptoController, dsPICDEM, dsPICDEM.net Matching, Dynamic Average Matching , DAM, ECAN, Espresso T1S, EtherGREEN, EyeOpen, GridTime, IdealBridge, IGaT, In-Circuit Serial Programming, ICSP, INICnet, Intelligent Parallel, IntelliMOS, Inter-Chip Connectivity, JitterBlocker, Knob-on-Display, MarginLink, maxC maualugaView, memBrain, Mindi, MiWi, MPASM, MPF, MPLAB Faʻamaonia logo, MPLIB, MPLINK, mSiC, MultiTRAK, NetDetach, Omniscient Code Generation, PICDEM, PICDEM.net, PICkit, PICtail, Power MOS IV, Power MOS 7, PowerSmart, PureSilicon , QMatrix, REAL ICE, Ripple Blocker, RTAX, RTG4, SAM-ICE, Serial Quad I/O, simpleMAP, SimpliPHY, SmartBuffer, SmartHLS, SMART-IS, storClad, SQI, SuperSwitcher, SuperSwitcher II, Switchtec, SynchroPHY, Aofa'i Tumau , Taimi Fa'atuatuaina, TSHARC, Turing, USBCheck, VariSense, VectorBlox, VeriPHY, ViewSpan, WiperLock, XpressConnect, ma ZENA o fa'ailoga fa'ailoga a Microchip Technology Incorporated i Amerika ma isi atunu'u.

O le SQTP o se faailoga tautua a Microchip Technology Incorporated i Amerika O le logo Adaptec, Frequency on Demand, Silicon Storage Technology, ma Symmcom o faʻailoga faʻamaufaʻailoga a Microchip Technology Inc. i isi atunuu. GestIC ose fa'ailoga fa'amaufa'ailoga a Microchip Technology Germany II GmbH & Co. KG, ose lala o Microchip Technology Inc., i isi atunu'u.

O isi fa'ailoga tau fefa'ataua'iga uma o lo'o ta'ua ii o meatotino a latou kamupani.

ISBN: 978-1-6683-0441-9

Faiga Fa'atonuga
Mo faʻamatalaga e uiga i Microchip's Quality Management Systems, faʻamolemole asiasi www.microchip.com/quality.

Fa'atauga ma Au'aunaga i le Lalolagi Atoa

AMERIKA

ASIA/ PASIFIK

Europa

Kamupani Ofisa
2355 Sisifo Chandler Blvd. Chandler, AZ 85224-6199
Telefoni: 480-792-7200
Fax: 480-792-7277
Lagolago Fa'atekinisi: www.microchip.com/support Web tuatusi: www.microchip.com Atlanta
Duluth, GA
Telefoni: 678-957-9614
Fax: 678-957-1455
Austin, TX
Telefoni: 512-257-3370
Boston
Westborough, MA Telefoni: 774-760-0087
Fax: 774-760-0088
Chicago
Itasca, IL
Telefoni: 630-285-0071
Fax: 630-285-0075
Dallas
Addison, TX
Telefoni: 972-818-7423
Fax: 972-818-2924
Detroit
Novi, MI
Telefoni: 248-848-4000
Houston, TX
Telefoni: 281-894-5983
Indianapolis
Noblesville, IN Tel: 317-773-8323
Fax: 317-773-5453
Telefoni: 317-536-2380
Los Angeles
Mission Viejo, CA Telefoni: 949-462-9523
Fax: 949-462-9608
Telefoni: 951-273-7800
Raleigh, NC
Telefoni: 919-844-7510
Niu Ioka, NY
Telefoni: 631-435-6000
San Iose, CA
Telefoni: 408-735-9110
Telefoni: 408-436-4270
Kanata – Toronto
Telefoni: 905-695-1980
|Fax: 905-695-2078

Ausetalia – Sini
Telefoni: 61-2-9868-6733
Saina - Beijing
Telefoni: 86-10-8569-7000
Saina – Chengdu
Telefoni: 86-28-8665-5511
Saina – Chongqing
Telefoni: 86-23-8980-9588
Saina – Dongguan
Telefoni: 86-769-8702-9880
Saina – Guangzhou
Telefoni: 86-20-8755-8029
Saina – Hangzhou
Telefoni: 86-571-8792-8115
Saina – Hong Kong SAR
Telefoni: 852-2943-5100
Saina – Nanjing
Telefoni: 86-25-8473-2460
Saina – Qingdao
Telefoni: 86-532-8502-7355
Saina – Shanghai
Telefoni: 86-21-3326-8000
Saina – Shenyang
Telefoni: 86-24-2334-2829 Saina – Shenzhen
Telefoni: 86-755-8864-2200
Saina – Suzhou
Telefoni: 86-186-6233-1526
Saina - Wuhan
Telefoni: 86-27-5980-5300
Saina – Xian
Telefoni: 86-29-8833-7252
Saina – Xiamen
Telefoni: 86-592-2388138
Saina – Zhuhai
Telefoni: 86-756-3210040

Initia – Bangalore
Telefoni: 91-80-3090-4444
Initia – New Delhi
Telefoni: 91-11-4160-8631
Initia – Pune
Telefoni: 91-20-4121-0141
Iapani – Osaka
Telefoni: 81-6-6152-7160
Iapani – Tokyo
Telefoni: 81-3-6880-3770
Korea – Daegu
Telefoni: 82-53-744-4301
Korea – Seoul
Telefoni: 82-2-554-7200 Meleisia – Kuala Lumpur
Telefoni: 60-3-7651-7906
Meleisia – Penang
Telefoni: 60-4-227-8870
Filipino – Manila
Telefoni: 63-2-634-9065
Singapore
Telefoni: 65-6334-8870
Taiuani – Hsin Chu
Telefoni: 886-3-577-8366
Taiuani – Kaohsiung
Telefoni: 886-7-213-7830
Taiuani – Taipei
Telefoni: 886-2-2508-8600
Thailand – Bangkok
Telefoni: 66-2-694-1351
Vietnam – Ho Chi Minh
Telefoni: 84-28-5448-2100

Austria – Uelese
Telefoni: 43-7242-2244-39
Fax: 43-7242-2244-393Denmark – Copenhagen
Telefoni: 45-4485-5910
Fax: 45-4485-2829Finland – Espoo
Telefoni: 358-9-4520-820

Falani – Pale
Tel: 33-1-69-53-63-20
Fax: 33-1-69-30-90-79

Siamani – Garching
Telefoni: 49-8931-9700

Siamani – Haan
Telefoni: 49-2129-3766400

Siamani – Heilbronn
Telefoni: 49-7131-72400

Siamani – Karlsruhe Telefoni: 49-721-625370

Siamani – Munich
Tel: 49-89-627-144-0
Fax: 49-89-627-144-44

Siamani – Rosenheim
Telefoni: 49-8031-354-560

Isaraelu – Hod Hasaron
Telefoni: 972-9-775-5100

Italia – Milan
Telefoni: 39-0331-742611
Fax: 39-0331-466781

Italia – Padova
Telefoni: 39-049-7625286

Netherlands – Drunen
Telefoni: 31-416-690399
Fax: 31-416-690340

Norway – Trondheim
Telefoni: 47-72884388

Polani – Warsaw
Telefoni: 48-22-3325737

Romania – Bucharest
Tel: 40-21-407-87-50

Sepania - Madrid
Tel: 34-91-708-08-90
Fax: 34-91-708-08-91
Suetena – Gothenberg
Tel: 46-31-704-60-40
Suetena - Stockholm
Telefoni: 46-8-5090-4654
Peretania - Wokingham
Telefoni: 44-118-921-5800
Fax: 44-118-921-5820

Pepa / Punaoa

MICROCHIP AN4229 Risc V Processor Subsystem [pdf] Taiala mo Tagata Fa'aoga
AN4229, AN4229 Risc V Processor Subsystem, AN4229, Risc V Processor Subsystem, Processor Subsystem, Subsystem

Fa'asinomaga

Tusi Taiala

MICROCHIP AN4229 Risc V Processor Subsystem

Fa'amatalaga o oloa

Fa'atonuga o le Fa'aaogaina o Mea