ARDUINO ABX00031 Nano 33 BLE Sense Module
Fa'amatalaga
Nano 33 BLE Sense o se la'ititi lapopo'a lapopo'a o lo'o iai le NINA B306 module, fa'avae i luga o le Nordic nRF52480 ma o lo'o iai le Cortex M4F, o se pusi crypto e mafai ona fa'amautu fa'amaumau tusipasi ma ki mua'i fefa'asoaa'i ma le 9 axis IMU. O le module e mafai ona faʻapipiʻiina e avea o se vaega DIP (pe a faʻapipiʻi pine pine), poʻo se vaega SMT, faʻapipiʻi saʻo e ala i pads castellated.
Itulau fa'atatau:
Fausia, faʻaleleia, faʻaoga IoT
Vaega
NINA B306 Module
Processor
- 64 MHz Arm® Cortex-M4F (faatasi ai ma le FPU)
- 1 MB Flash + 256 KB RAM
Bluetooth 5 multiprotocol leitio
- 2 Mbps
- CSA #2
- Fa'aopoopo Fa'asalalauga
- Va'aiga Umi
- +8 dBm TX mana
- -95 dBm lagona
- 4.8 mA i le TX (0 dBm)
- 4.6 mA i le RX (1 Mbps)
- Balun tu'ufa'atasi ma le 50 Ω fa'ai'uga tasi
- IEEE 802.15.4 lagolago leitio
- filo
- Zigbee
Peripherals
- Saosaoa atoatoa 12 Mbps USB
- NFC-A tag
- Arm CryptoCell CC310 subsystem puipuiga malu QSPI/SPI/TWI/I²S/PDM/QDEC
- Saosaoa maualuga 32 MHz SPI
- Quad SPI fa'aoga 32 MHz
- EasyDMA mo feso'ota'iga numera uma
- 12-bit 200 ksps ADC
- 128 bit AES/ECB/CCM/AAR co-processor
LSM9DS1 (9 axis IMU)
- 3 ala fa'avavevave, 3 alavai fua fa'atatau, 3 alavai fa'amaneta
- ±2/±4/±8/±16 g laina faatelevaveina atoa
- ±4/±8/±12/±16 gauss maneta fua atoa
- ± 245 / ± 500 / ± 2000 dps fua fa'atatau fua fa'atatau atoa
- 16-bit fa'amatalaga fa'amatalaga
LPS22HB (Barometer ma le vevela)
- 260 i le 1260 hPa le maualuga o le mamafa ma le 24 bit saʻo
- Malosi maualuga ova malosi: 20x fa'afuafua atoa
- Taui o le vevela fa'apipi'i
- 16-bit fa'amaumauga o le vevela
- 1 Hz i le 75 Hz fua o fa'amatalaga fa'aulufalega Galuega fa'alavelave: Sauni Fa'amatalaga, fu'a FIFO, fa'alava o le mamafa
HTS221 (se'i susū)
- 0-100% va'aiga susū fa'atatau
- Ma'ale'ale RH maualuga: 0.004% rH/LSB
- Sa'o le susu: ± 3.5% rH, 20 i le + 80% rH
- Sa'o le vevela: ± 0.5 °C,15 i le +40 °C
- 16-bit susū ma fa'amaumauga o le vevela
APDS-9960 (Digital proximity, Ambient light, RGB and Gesture Sensor)
- Ambient Light ma le RGB Color Sensing fa'atasi ai ma fa'amama poloka UV ma IR
- Ma'ale'ale maualuga - E fetaui lelei mo le gaioiga i tua o tioata pogisa
- Latalata Lagona fa'atasi ai ma le fa'ate'aina o le malamalama Ambient
- Lavelave Gaioiga Lagona
MP34DT05 (Ma'i leo leo)
- AOP = 122.5 dbSPL
- 64 dB fua faatatau fa'ailo i le pisa
- Omnidirectional maaleale
- –26 dBFS ± 3 dB lagona
ATECC608A (Crypto Chip)
- Cryptographic co-processor fa'atasi ai ma le teuina o ki fa'avae fa'amautu
- Puipuia le teuina e oo atu i le 16 ki, tusipasi po'o fa'amaumauga
- ECDH: FIPS SP800-56A Elliptic Curve Diffie-Hellman
- NIST tulaga masani P256 elliptic curve lagolago
- SHA-256 & HMAC hash e aofia ai fa'asa'o/toe fa'afo'i fa'amatalaga e leai se masini
- AES-128 encrypt/decrypt, galois fanua faatele mo GCM
MPM3610 DC-DC
- Fa'atonutonu mea e tu'uina atu voltage mai i luga i le 21V ma le itiiti ifo o le 65% lelei @fa'atauga maualalo
- E sili atu i le 85% le malosi @12V
Mataupu
- Le Komiti Faatino
- Fa'ailoga
- Tulaga Fautuaina o Galuega
- Fa'aaogāga Malosiaga
- Faagaioia i Lugaview
- Laupapa Topology
- Processor
- Crypto
- IMU
- Barometer ma le Temperature Sensor
- Susū Fete'ena'i ma le Su'esu'e o le vevela
- Fa'afuainumera Latalata, Ambient Light, RGB ma Gasture Sensor
- Su'eina Gaioiga
- Su'esu'ega Latalata
- Lanu ma le Su'esu'ega ALS
- Faʻalogo leo puʻeata
- Laau Malosi
- Galuega a le Komiti Faatino
- Amataina - IDE
- Amataina - Arduino Web Fa'atonu
- Amataina - Arduino IoT Cloud
- Sample Tusitusi
- Punaoa i luga ole laiga
- Toe fa'aleleia a le Komiti Fa'atonu
- Fesootaiga Pinout
- USB
- Ulutala
- Debug
- Fa'amatalaga Fa'ainisinia
- Otootoga o le Laupapa ma Pu Fa'amau
- Tusipasi
- Ta'utinoga o le tausisia CE DoC (EU)
- Ta'utinoga o le tausisia i le EU RoHS & REACH 211 01/19/2021
- Tautinoga o Minerale Fete'ena'i
- FCC Lapataiga
- Fa'amatalaga a le Kamupani
- Fa'amaumauga Fa'asinomaga
- Toe Iloilo Tala'aga
Le Komiti Faatino
E pei o laupapa uma o le Nano form factor, Nano 33 BLE Sense e leai se uta maa ae e mafai ona fa'aola ile USB po'o ulutala.
FAAMANATU: Arduino Nano 33 BLE Sense e na'o le lagolagoina o le 3.3VI/Os ma e LĒ 5V fa'apalepale fa'amolemole ia mautinoa e te le o fa'afeso'ota'i sa'o fa'ailo 5V i lenei laupapa pe o le a fa'aleagaina. E le gata i lea, e ese mai i laupapa Arduino Nano e lagolagoina le 5V galuega, o le 5V pine e LE maua ai vol.tage ae e sili atu ona fesoʻotaʻi, e ala i se osooso, i le USB power input.
Fa'ailoga
Tulaga Fautuaina o Galuega
| Faailoga | Fa'amatalaga | Min | Max |
| Tapula'a fa'amama fa'asao mo le laupapa atoa: | -40 °C (40 °F) | 85°C (185°F) |
Fa'aaogāga Malosiaga
| Faailoga | Fa'amatalaga | Min | Ituaiga | Max | Vaega |
| PBL | Malosiaga fa'aaoga ma pisi pisi | TBC | mW | ||
| PLP | Le fa'aogaina o le malosi ile tulaga maualalo ole mana | TBC | mW | ||
| PMAX | Fa'aaogāina Malosi maualuga | TBC | mW |
Faagaioia i Lugaview
Laupapa Topology
| Ref. | Fa'amatalaga | Ref. | Fa'amatalaga |
| U1 | NINA-B306 Module BLE 5.0 Module | U6 | MP2322GQH Step Down Converter |
| U2 | LSM9DS1TR Sensor IMU | PB1 | IT-1185AP1C-160G-GTR Pusa faamau |
| U3 | MP34DT06JTR Mems Microphone | HS-1 | HTS221 Sūsū Sensori |
| U4 | ATECC608A Crypto chip | DL1 | Led L |
| U5 | APDS-9660 Ambient Module | DL2 | Ta'ita'i Mana |
| Ref. | Fa'amatalaga | Ref. | Fa'amatalaga |
| SJ1 | VUSB Jumper | SJ2 | D7 Tagata osooso |
| SJ3 | 3v3 Fa'aoso | SJ4 | D8 Tagata osooso |
Processor
O le Processor Autu o se Cortex M4F e oʻo atu i le 64MHz. O le tele o ona pine e feso'ota'i atu i ulutala i fafo, peita'i, o nisi e fa'aagaga mo feso'ota'iga i totonu ma le fa'aoga uaealesi ma le I2C pito i totonu (IMU ma Crypto).
FAAMANATU: E ese mai i isi laupapa Arduino Nano, o pine A4 ma le A5 o loʻo i ai se toso i luga ma le faʻaaogaina e avea o se I2C Bus ona e le fautuaina le faʻaogaina o mea faʻaoga analog.
Crypto
O le crypto chip i Arduino IoT boards o le mea lea e fai ai le eseesega ma isi laupapa e le malu puipuia ona e maua ai se auala saogalemu e teu ai mealilo (pei o tusipasi) ma faʻavavevave faʻamautu faʻamaonia ae le faʻaalia mea lilo i tusitusiga manino. Source code mo le Arduino Library e lagolagoina le Crypto o loʻo avanoa [8]
IMU
Arduino Nano 33 BLE o loʻo i ai le 9 axis IMU faʻapipiʻi e mafai ona faʻaaoga e fua ai le faʻatonuga o le laupapa (e ala i le siakiina o le kalave acceleration vector orientation poʻo le faʻaaogaina o le tapasa 3D) poʻo le fuaina o teteʻi, vibration, faʻavavevave ma le saoasaoa o le taamilosaga. Source code mo le Arduino Library e lagolagoina le IMU o loʻo avanoa [9]
Barometer ma le Temperature Sensor
O le Barometer fa'apipi'i ma le masini vevela e mafai ai ona fuaina le mamafa. E mafai ona fa'aoga le masini vevela fa'atasi ma le barometer e totogi ai le fua o le mamafa. O loʻo maua le code source mo le Arduino Library e lagolagoina le Barometer [10]
Susū Fete'ena'i ma le Su'esu'e o le vevela
Su'e susū fa'atatau e fua ai le susū fa'atasi. E pei o le Barometer, o lenei masini o loʻo i ai se masini vevela tuʻufaʻatasia e mafai ona faʻaaogaina e totogi ai le fua. O loʻo maua le code source mo le Arduino Library o loʻo lagolagoina le masini Susū [11]
Fa'afuainumera Latalata, Ambient Light, RGB ma Gasture Sensor
O lo'o maua le fa'ailoga puna mo le Arduino Library e lagolagoina le Proximity/gesture/ALS sensor [12]
Su'eina Gaioiga
O le su'esu'eina o taga e fa'aogaina ai ata fa'ata'ita'i e fa e lagona ai le fa'aalia o le malosi o le IR (na maua mai i le LED tu'ufa'atasi) e fa'aliliu ai le tino.
Su'esu'ega Latalata
O le mea e iloa ai le Proximity e maua ai le fuaina o le mamao (Eg mata o masini feavea'i i le taliga o le tagata fa'aoga) e ala ile photodiode su'esu'eina ole ref.
Lanu ma le Su'esu'ega ALS
Ole mea e iloa ai le Lanu ma le ALS e maua ai fa'amatalaga mumu, lanumeamata, lanumoana ma manino le malamalama. O laina taʻitasi R, G, B, C e iai le U
Faʻalogo leo puʻeata
O le MP34DT05 o se ultra-compact, low-power, omnidirectional, numera MEMS microphone fausia ma se elemene sensing capacitive ma se IC interface. O le elemene lagona, e mafai ona iloa ai galu faʻalogo, ua gaosia e faʻaaoga ai se faʻataʻitaʻiga faʻapitoa micromachining silicon faʻapitoa e maua ai masini leo.
Laau Malosi
E mafai ona fa'aola le laupapa e ala i feso'ota'iga USB, VIN po'o VUSB pine i luga o ulutala.
FAAMANATU: Talu ai ona o le VUSB e fafaga le VIN e ala i le Schottky diode ma le DC-DC regulator ua faʻamaonia le pito maualalo o le voli ulufale.tage 4.5V le pito maualalo voltage mai le USB e tatau ona fa'aopoopo i le voltage i le va o le 4.8V i le 4.96V e faʻatatau i le taimi nei o loʻo tusia.
Galuega a le Komiti Faatino
Amataina - IDE
Afai e te mana'o e fa'apolokalame lau Arduino Nano 33 BLE a'o to'aga e te mana'omia fa'apipi'i le Arduino Desktop IDE [1] Ina ia fa'afeso'ota'i le Arduino Nano 33 BLE i lau komepiuta, e te mana'omia se uaea Micro-B USB. E maua ai foi le malosiaga i le laupapa, e pei ona faʻaalia e le LED.
Amataina - Arduino Web Fa'atonu
O laupapa Arduino uma, e aofia ai ma lenei, galue i fafo-o-le-pusa i luga o le Arduino Web Fa'atonu [2], i le na'o le fa'apipi'iina o se mea fa'apipi'i faigofie. Le Arduino Web Fa'atonu e talimalo i luga o le initaneti, o le mea lea o le a fa'afou i taimi uma ma foliga fou ma lagolago mo laupapa uma. Mulimuli i le [3] e amata fa'ailoga i luga ole su'esu'ega ma fa'ae'e au ata tusi ile lau laupapa.
Amataina - Arduino IoT Cloud
O oloa uma Arduino IoT e mafai ona lagolagoina i Arduino IoT Cloud lea e mafai ai e oe ona Log, kalafi ma auʻiliʻili faʻamatalaga faʻamatalaga, faʻaosoina mea tutupu, ma faʻaogaina lou fale poʻo pisinisi.
Sample Tusitusi
SampO ata tusi mo le Arduino Nano 33 BLE e mafai ona maua i le "Examples" lisi i le Arduino IDE poʻo le vaega "Documentation" o le Arduino Pro webnofoaga [4]
Punaoa i luga ole laiga
I le taimi nei ua uma ona e pasia faʻavae o mea e mafai ona e faia i le laupapa e mafai ona e suʻesuʻeina avanoa e le gata e maua mai e ala i le siakiina o galuega faʻafiafia i ProjectHub [13], le Arduino Library Reference [14] ma le faleoloa i luga ole laiga [15] lea. o le a mafai ona e fa'amae'a lau laupapa i masini, actuators ma sili atu.
Toe fa'aleleia a le Komiti Fa'atonu
O laupapa Arduino uma o loʻo i ai se faʻapipiʻi faʻapipiʻiina e mafai ai ona faʻafefeina le laupapa e ala i le USB. Afai e lokaina e se ata tusi le faagasologa ma e le toe mafai ona oo atu le laupapa e ala i le USB e mafai ona ulufale i le faiga bootloader e ala i le ta faaluaina o le faamau toe setiina pe a uma le power-up.
Fesootaiga Pinout
USB
| Pin | Galuega | Ituaiga | Fa'amatalaga |
| 1 | VUSB | Malosiaga | Malosiaga Tuuina atu. Afai e fa'aola le laupapa e ala i le VUSB mai le fa'auluuluga o le mea lea (1) |
| 2 | D- | Eseesega | USB faʻamatalaga faʻapitoa - |
| 3 | D+ | Eseesega | USB fa'amatalaga eseese + |
| 4 | ID | fa'atusa | Filifilia le fa'aogaina o le Host/Device |
| 5 | GND | Malosiaga | Eleele Eleele |
Ulutala
O lo'o fa'aalia e le laupapa ni feso'ota'iga 15 pine e lua e mafai ona fa'apipi'i fa'atasi ma fa'aulu fa'aulu pe fa'asoloina e ala i vias fa'apipi'i.
| Pin | Galuega | Ituaiga | Fa'amatalaga |
| 1 | D13 | Faafuainumera | GPIO |
| 2 | +3V3 | Malosiaga | Fa'alotoifale fa'aola le mana fa'aola i masini fafo |
| 3 | AREF | fa'atusa | Analog Reference; e mafai ona faʻaaogaina e avea ma GPIO |
| 4 | A0/DAC0 | fa'atusa | ADC i totonu/DAC fafo; e mafai ona faʻaaogaina e avea ma GPIO |
| 5 | A1 | fa'atusa | ADC i totonu; e mafai ona faʻaaogaina e avea ma GPIO |
| 6 | A2 | fa'atusa | ADC i totonu; e mafai ona faʻaaogaina e avea ma GPIO |
| 7 | A3 | fa'atusa | ADC i totonu; e mafai ona faʻaaogaina e avea ma GPIO |
| 8 | A4/SDA | fa'atusa | ADC i totonu; I2C SDA; E mafai ona faʻaaogaina e avea ma GPIO (1) |
| 9 | A5/SCL | fa'atusa | ADC i totonu; I2C SCL; E mafai ona faʻaaogaina e avea ma GPIO (1) |
| 10 | A6 | fa'atusa | ADC i totonu; e mafai ona faʻaaogaina e avea ma GPIO |
| 11 | A7 | fa'atusa | ADC i totonu; e mafai ona faʻaaogaina e avea ma GPIO |
| 12 | VUSB | Malosiaga i totonu/Ofo | E masani lava NC; e mafai ona faʻafesoʻotaʻi i le VUSB pine o le USB connector e ala i le faʻapuupuuina o se osooso |
| 13 | RST | Digital In | Malosiaga toe setiina fa'aoga (faiga o pine 18) |
| 14 | GND | Malosiaga | Eleele Eleele |
| 15 | VIN | Malosiaga i totonu | Vin Malosiaga ulufale |
| 16 | TX | Faafuainumera | USART TX; e mafai ona faʻaaogaina e avea ma GPIO |
| 17 | RX | Faafuainumera | USART RX; e mafai ona faʻaaogaina e avea ma GPIO |
| 18 | RST | Faafuainumera | Malosiaga toe setiina fa'aoga (faiga o pine 13) |
| 19 | GND | Malosiaga | Eleele Eleele |
| 20 | D2 | Faafuainumera | GPIO |
| 21 | D3/PWM | Faafuainumera | GPIO; e mafai ona faʻaaogaina e fai ma PWM |
| 22 | D4 | Faafuainumera | GPIO |
| 23 | D5/PWM | Faafuainumera | GPIO; e mafai ona faʻaaogaina e fai ma PWM |
| 24 | D6/PWM | Faafuainumera | GPIO, e mafai ona faʻaaogaina e fai ma PWM |
| 25 | D7 | Faafuainumera | GPIO |
| 26 | D8 | Faafuainumera | GPIO |
| 27 | D9/PWM | Faafuainumera | GPIO; e mafai ona faʻaaogaina e fai ma PWM |
| 28 | D10/PWM | Faafuainumera | GPIO; e mafai ona faʻaaogaina e fai ma PWM |
| 29 | D11/MOSI | Faafuainumera | SPI MOSI; e mafai ona faʻaaogaina e avea ma GPIO |
| 30 | D12/MISO | Faafuainumera | SPI MISO; e mafai ona faʻaaogaina e avea ma GPIO |
Debug
I le pito i lalo o le laupapa, i lalo o le module fesoʻotaʻiga, o faʻailoga debug o loʻo faʻatulagaina e pei o 3 × 2 pads suʻega ma 100 mil pitch ma pine 4 aveese. O le pine 1 o loʻo faʻaalia i le Ata 3 - Tulaga Fesoʻotaʻi
| Pin | Galuega | Ituaiga | Fa'amatalaga |
| 1 | +3V3 | Malosiaga | Malosiaga e gaosia i totonu e fa'aaogaina e pei o voltagu faasinomaga |
| 2 | SWD | Faafuainumera | nRF52480 Fa'amatalaga Debug Uea Tasi |
| 3 | SWCLK | Digital In | nRF52480 Uaea Tasi Debug Uati |
| 5 | GND | Malosiaga | Eleele Eleele |
| 6 | RST | Digital In | Malosiaga maualalo toe seti fa'aoga |
Fa'amatalaga Fa'ainisinia
Otootoga o le Laupapa ma Pu Fa'amau
O fua fa'atonu e fefiloi i le va o le metric ma le imperial. E fa'aogaina faiga fa'a-Imperial e fa'amautu ai le 100 mil pitch grid i le va o laina pine e fa'ataga ai latou e fa'apipi'i se laupapa falaoa ae o le umi o le laupapa o le Metric.
Tusipasi
Ta'utinoga o le tausisia CE DoC (EU)
Matou te taʻutino atu i lalo o la matou matafaioi e faʻapea o oloa o loʻo i luga o loʻo ogatasi ma manaʻoga taua o taʻiala a le EU o loʻo mulimuli mai ma o lea e agavaʻa ai mo feoaiga saoloto i totonu o maketi e aofia ai le Iuni a Europa (EU) ma Europa Economic Area (EEA).
Ta'utinoga o le tausisia i le EU RoHS & REACH 211 01/19/2021
O laupapa Arduino o loʻo tausisia le RoHS 2 Directive 2011/65/EU o le Palemene Europa ma le RoHS 3 Directive 2015/863/EU o le Fono a Iuni 4 Iuni 2015 i le faʻatapulaʻaina o le faʻaaogaina o nisi mea matautia i mea eletise ma eletise.
| Mea | tapulaa maualuga (ppm) |
| Sulu (Pb) | 1000 |
| Cadmium (Cd) | 100 |
| Mercury (Hg) | 1000 |
| Hexavalent Chromium (Cr6+) | 1000 |
| Poly Brominated Biphenyl (PBB) | 1000 |
| Poly Brominated Diphenyl ethers (PBDE) | 1000 |
| Pi(2-Ethylhexyl} phthalate (DEHP) | 1000 |
| Benzyl butyl phthalate (BBP) | 1000 |
| Dibutyl phthalate (DBP) | 1000 |
| Diisobutyl phthalate (DIBP) | 1000 |
Tuusaunoaga: E leai ni tuusaunoaga e talosagaina.
Arduino Boards o lo'o tausisia atoatoa mana'oga fa'atatau i le Tulafono Fa'atonutonu a Iuni a Europa (EC) 1907/2006 e uiga i le Fa'amauina, Iloiloga, Fa'atagaga ma Fa'asaina o Vailaau Fa'asaina (REACH). Matou te ta'utino atu e leai se SVHC (https://echa.europa.eu/web/guest/candidate-list-table), o le Lisi o Sui Fa'atonu o mea e sili ona popole mo le fa'atagaga o lo'o tu'uina atu nei e le ECHA, o lo'o i ai i oloa uma (ma fa'apea fo'i afifi) i le aofa'i atoa i se fa'atonuga tutusa pe sili atu i le 0.1%. I le mea sili o lo matou iloa, matou te taʻutino atu foi e le o iai a matou oloa ni mea o loʻo lisiina i luga o le "Lisi Faʻatagaina" (Faʻaopoopoga XIV o tulafono a le REACH) ma mea o loʻo popole tele (SVHC) i soʻo se aofaiga tele e pei ona faʻamaonia. e le Annex XVII o le lisi o Sui Fa'atonu lomia e le ECHA (European Chemical Agency) 1907 /2006/EC.
Ta'utinoga o Minerale Fete'ena'i
I le avea ai o se tagata e tu'uina atu vaega fa'aeletoroni ma eletise i le lalolagi atoa, o lo'o nofouta Arduino i a tatou matafaioi e tusa ai ma tulafono ma tulafono fa'atatau i Fete'ena'iga Minerale, fa'apitoa le Dodd-Frank Wall Street Reform and Consumer Protection Act, Vaega 1502. minerale pei ole Tin, Tantalum, Tungsten, poʻo le Auro. O minerale fete'ena'i o lo'o i totonu oa tatou oloa i le tulaga o le solder, po'o se vaega i u'amea u'amea. O se vaega o la matou su'esu'ega talafeagai ua fa'afeso'ota'i ai e Arduino vaega fa'atau oloa i totonu o la matou sapalai filifili e fa'amaonia lo latou tausisia pea o tulafono faatonutonu. E tusa ai ma fa'amatalaga ua maua e o'o mai i le taimi nei, matou te ta'utino atu o a matou oloa o lo'o iai Minerale Fete'ena'i e maua mai i nofoaga e leai ni fete'ena'iga.
FCC Lapataiga
So'o se Suiga po'o ni suiga e le'i fa'amaonia manino e le itu e nafa ma le usita'ia e mafai ona fa'aleaogaina le pule a le tagata fa'aoga e fa'agaioi ai masini. O lenei masini e tausisia le vaega 15 o Tulafono FCC. O le fa'agaioiga e fa'atatau i tulaga nei e lua:
- O lenei masini e le mafai ona fa'alavelave fa'alavelave
- e tatau ona talia e lenei masini so'o se fa'alavelave e maua, e aofia ai fa'alavelave e ono fa'atupu ai le le mana'omia.
FCC RF Radiation Faʻamatalaga Faʻaaliga:
- O lenei Transmitter e le tatau ona tu'u fa'atasi pe fa'agaioi fa'atasi ma so'o se isi lava antenna po'o le transmitter.
- o ana mea faigaluega e ogatasi ma tapula'a fa'alatalata fa'avevela RF ua fa'ata'atia mo se si'osi'omaga le pulea.
- O meafaigaluega nei e tatau ona fa'apipi'i ma fa'agaioi i se mamao la'ititi 20cm i le va o le radiator ma lou tino.
Gagana Peretania: O tusi lesona a le tagata fa'aoga mo masini leitio e tuusaunoaina laisene e tatau ona iai le fa'asilasilaga o lo'o mulimuli mai pe tutusa i se nofoaga iloga i totonu o le tusi fa'aoga po'o se isi mea i luga o le masini po'o mea uma e lua. O lenei masini e ogatasi ma tulaga fa'ata'ita'iga RSS e tuusaunoa laisene a Industry Canada. O le fa'agaioiga e fa'atatau i tulaga nei e lua:
- atonu e le fa'alavelaveina lenei masini
- e tatau ona talia e lenei masini so'o se fa'alavelave, e aofia ai fa'alavelave e ono mafua ai le fa'aogaina o le masini.
Lapataiga IC SAR:
Gagana Igilisi E tatau ona fa'apipi'i ma fa'agaioi nei mea faigaluega ile la'ititi la'ititi ole mamao ole 20 cm ile va ole fa'avevela ma lou tino. O le mea lea, Arduino Srl ta'utino atu o lenei oloa o lo'o tausisia manaoga taua ma isi aiaiga talafeagai o le Directive 2014/53/EU. O lenei oloa e faʻatagaina e faʻaaogaina i totonu o setete uma o le EU.
| Fa'aili fa'avevesi | Malosi maualuga o le gaosiga (ERP) |
| 863-870Mhz | 5.47 dBm |
Fa'amatalaga a le Kamupani
| Igoa o le Kamupani | Arduino Srl |
| Tulaga a le Kamupani | Via Andrea Appiani 25 20900 MONZA Italia |
Fa'amaumauga Fa'asinomaga
| Fa'asinomaga | So'oga |
| Arduino IDE (Lapisinisi) | https://www.arduino.cc/en/Main/Software |
| Arduino IDE (Ao) | https://create.arduino.cc/editor |
| Cloud IDE Amataina | https://create.arduino.cc/projecthub/Arduino_Genuino/getting-started-with-arduino-web-editor-4b3e4a |
| Fono | http://forum.arduino.cc/ |
| Nina B306 | https://www.u-blox.com/sites/default/files/NINA-B3_DataSheet_%28UBX-17052099%29.pdf |
| ECC608 | http://ww1.microchip.com/downloads/en/DeviceDoc/40001977A.pdf |
| MPM3610 | https://www.monolithicpower.com/pub/media/document/MPM3610_r1.01.pdf |
| ECC608 Faletusi | https://github.com/arduino-libraries/ArduinoECCX08 |
| LSM6DSL Faletusi | https://github.com/adafruit/Adafruit_LSM9DS1 |
| LPS22HB | https://github.com/stm32duino/LPS22HB |
| HTS221 Faletusi | https://github.com/stm32duino/HTS221 |
| APDS9960 Faletusi | https://github.com/adafruit/Adafruit_APDS9960 |
| ProjectHub | https://create.arduino.cc/projecthub?by=part&part_id=11332&sort=trending |
| Fa'asinoga Faletusi | https://www.arduino.cc/reference/en/ |
Toe Iloilo Tala'aga
| Aso | Toe Iloiloga | Suiga |
| 04/27/2021 | 1 | Fa'amatalaga fa'amatalaga lautele |
Pepa / Punaoa
 |
ARDUINO ABX00031 Nano 33 BLE Sense Module [pdf] Tusi Taiala ABX00031, Nano 33 BLE Sense, Module, Nano 33 BLE Sense Module, ABX00031 Nano 33 BLE Sense Module |
