ARDUINO ABX00031 Nano 33 BLE Sense Module
Bayani
Nano 33 BLE Sense wani ƙaramin ƙaramin tsari ne wanda ke ɗauke da tsarin NINA B306, dangane da Nordic nRF52480 kuma yana ƙunshe da Cortex M4F, guntun crypto wanda zai iya adana takaddun shaida da maɓallan da aka riga aka raba da IMU axis 9. Za'a iya shigar da tsarin ko dai a matsayin bangaren DIP (lokacin da ake hawan fil), ko kuma a matsayin bangaren SMT, ana siyar da shi kai tsaye ta faifan castellated.
Wuraren manufa:
Mai ƙirƙira, haɓakawa, aikace-aikacen IoT
Siffofin
NINA B306 Module
Mai sarrafawa
- 64 MHz Arm® Cortex-M4F (tare da FPU)
- 1 MB Flash + 256 KB RAM
Bluetooth 5 multiprotocol rediyo
- 2 Mbps
- CSA #2
- Karin Talla
- Dogon Rage
- + 8 dBm TX iko
- -95 dBm hankali
- 4.8mA a cikin TX (0 dBm)
- 4.6mA a cikin RX (1 Mbps)
- Haɗin balun tare da 50 Ω fitarwa mai ƙarewa ɗaya
- IEEE 802.15.4 goyon bayan rediyo
- Zare
- Zigbee
Na'urorin haɗi
- Cikakken-gudun 12 Mbps USB
- NFC-A tag
- Arm CryptoCell CC310 tsarin tsaro QSPI/SPI/TWI/I²S/PDM/QDEC
- Babban gudun 32 MHz SPI
- Quad SPI dubawa 32 MHz
- EasyDMA don duk musaya na dijital
- 12-bit 200 ksps ADC
- 128-bit AES/ECB/CCM/AAR co-processor
LSM9DS1 (9 axis IMU)
- 3 hanzari tashoshi, 3 angular kudi tashoshi, 3 Magnetic filin tashoshi
- ± 2 / ± 4 / ± 8 / ± 16 g mizani hanzari cikakken sikelin
- ± 4 / 8 / ± 12 / ± 16 gauss Magnetic cikakken sikelin
- ± 245 / ± 500 / ± 2000 dps ƙimar kusurwa cikakken sikelin
- 16-bit data fitarwa
LPS22HB (Barometer da firikwensin zafin jiki)
- 260 zuwa 1260 hPa cikakken kewayon matsa lamba tare da madaidaicin 24 bit
- Babban ƙarfin matsi: 20x cikakken sikelin
- Cikakkiyar ramuwa na zafin jiki
- 16-bit bayanai fitarwa
- Yawan fitarwa na 1 Hz zuwa 75 Hz Ayyukan Katsewa: Shiryewar Bayanai, Tutocin FIFO, Matsalolin matsa lamba
HTS221 (dangin zafi firikwensin)
- 0-100% dangi zafi kewayon
- Babban hankali na rH: 0.004% rH/LSB
- Daidaitaccen ɗanshi: ± 3.5% rH, 20 zuwa + 80% rH
- Daidaitaccen zafin jiki: ± 0.5 °C, 15 zuwa +40 °C
- 16-bit zafi da bayanan fitarwa na zafin jiki
APDS-9960 (kusanci na dijital, Hasken yanayi, RGB da Sensor Gesture)
- Hasken Ambient da Sensing Launi na RGB tare da UV da IR masu toshewa
- Hankali sosai - Ya dace da aiki a bayan gilashin duhu
- Ƙimar kusanci tare da ƙin yarda da hasken yanayi
- Haɗaɗɗen Hannun Kashi
MP34DT05 (Makirifo na Dijital)
- AOP = 122.5 dbSPL
- 64dB rabon sigina-zuwa amo
- Hankalin kai tsaye
- -26 dBFS ± 3 dB hankali
ATECC608A (Crypto Chip)
- Co-processor na Cryptographic tare da amintaccen ma'ajiyar maɓalli na tushen hardware
- Ma'ajiyar kariya don maɓalli 16, takaddun shaida ko bayanai
- ECDH: FIPS SP800-56A Elliptic Curve Difi-Hellman
- NIST misali P256 elliptical curve support
- SHA-256 & HMAC hash gami da kashe-chip mahallin ajiyewa/dawowa
- AES-128 encrypt/decrypt, galois filin ninka don GCM
Saukewa: MPM3610-DC
- Yana daidaita shigar da voltage daga har zuwa 21V tare da mafi ƙarancin 65% inganci @ mafi ƙarancin kaya
- Fiye da 85% inganci @12V
Abubuwan da ke ciki
- Hukumar
- Mahimman ƙima
- Sharuɗɗan Aiki da aka Shawarar
- Amfanin Wuta
- Aiki Ya Ƙareview
- Cibiyar Topology
- Mai sarrafawa
- Crypto
- IMU
- Barometer da Sensor Zazzabi
- Dangantakar Humidity da Sensor Zazzabi
- Kusanci na Dijital, Hasken Ambient, RGB da Sensor Gesture
- Gane motsi
- Gano kusanci
- Launi da Gano ALS
- Makirufo na Dijital
- Itace Power
- Aikin hukumar
- Farawa - IDE
- Farawa - Arduino Web Edita
- Farawa - Arduino IoT Cloud
- Sampda Sketches
- Albarkatun Kan layi
- Farfadowar allo
- Mai haɗa Pinouts
- USB
- Shugabanni
- Gyara kuskure
- Bayanin Injiniya
- Bayanin allo da Ramukan Hawa
- Takaddun shaida
- Sanarwa na Daidaitawa CE DoC (EU)
- Sanarwa na Daidaitawa ga EU RoHS & ISAUTAR 211 01/19/2021
- Sanarwa Ma'adinan Rikici
- FCC Tsanaki
- Bayanin Kamfanin
- Takardun Magana
- Tarihin Bita
Hukumar
Kamar duk allunan nau'in nau'in Nano, Nano 33 BLE Sense ba shi da cajar baturi amma ana iya aiki dashi ta USB ko masu kai.
NOTE: Arduino Nano 33 BLE Sense yana goyan bayan 3.3VI/Os kawai kuma baya jure wa 5V don haka da fatan ba a haɗa siginar 5V kai tsaye zuwa wannan allo ko kuma ta lalace. Hakanan, sabanin allunan Arduino Nano waɗanda ke tallafawa aikin 5V, fil ɗin 5V BA YA samar da vol.tage amma an fi haɗa shi, ta hanyar jumper, zuwa shigar da wutar lantarki ta USB.
Mahimman ƙima
Sharuɗɗan Aiki da aka Shawarar
| Alama | Bayani | Min | Max |
| Iyakoki na thermal Conservative ga dukkan hukumar: | -40°C (40°F) | 85°C (185°F) |
Amfanin Wuta
| Alama | Bayani | Min | Buga | Max | Naúrar |
| PBL | Amfanin wuta tare da madauki mai aiki | TBC | mW | ||
| PLP | Yin amfani da wutar lantarki a cikin ƙarancin wutar lantarki | TBC | mW | ||
| PMAX | Matsakaicin Amfani da Wuta | TBC | mW |
Aiki Ya Ƙareview
Cibiyar Topology
| Ref. | Bayani | Ref. | Bayani |
| U1 | NINA-B306 Module BLE 5.0 Module | U6 | MP2322GQH Mataki Down Converter |
| U2 | LSM9DS1TR Sensor IMU | Saukewa: PB1 | Saukewa: IT-1185AP1C-160G-GTR |
| U3 | Bayanan Bayani na MP34DT06JTR | Farashin HS-1 | Sensor Humidity HTS221 |
| U4 | ATECC608A Crypto guntu | Farashin DL1 | LED L |
| U5 | APDS-9660 Module na yanayi | Farashin DL2 | Led Power |
| Ref. | Bayani | Ref. | Bayani |
| SJ1 | VUSB Jumper | SJ2 | D7 Jumper |
| SJ3 | 3v3 Jump | SJ4 | D8 Jumper |
Mai sarrafawa
Babban Mai sarrafawa shine Cortex M4F wanda ke gudana har zuwa 64MHz. Yawancin fitilun sa suna da alaƙa da masu kai na waje, duk da haka, wasu an tanadar su don sadarwa ta ciki tare da tsarin mara waya da na cikin jirgi na I2C na ciki (IMU da Crypto).
NOTE: Sabanin sauran allunan Arduino Nano, fil A4 da A5 suna da cirewar ciki da tsoho don amfani da su azaman Bus na I2C don haka ba a ba da shawarar amfani da abubuwan shigar analog ba.
Crypto
Chip ɗin crypto a cikin allunan Arduino IoT shine abin da ke haifar da bambance-bambance tare da sauran alluna marasa tsaro kamar yadda yake ba da amintacciyar hanya don adana sirri (kamar takaddun shaida) da haɓaka amintattun ladabi yayin da baya fallasa sirri a cikin rubutu bayyananne. Lambar tushe don Laburaren Arduino wanda ke goyan bayan Crypto yana samuwa [8]
IMU
Arduino Nano 33 BLE yana da 9 axis IMU wanda za'a iya amfani dashi don auna daidaitawar allo (ta hanyar duba yanayin haɓaka haɓakar nauyi ko ta amfani da kamfas na 3D) ko don auna girgiza, girgizawa, haɓakawa da saurin juyawa. Lambar tushe don ɗakin karatu na Arduino wanda ke goyan bayan IMU yana samuwa [9]
Barometer da Sensor Zazzabi
Barometer da ke ciki da firikwensin zafin jiki suna ba da izinin auna matsi na yanayi. Ana iya amfani da firikwensin zafin jiki da aka haɗa tare da barometer don rama ma'aunin matsa lamba. Lambar tushe don ɗakin karatu na Arduino wanda ke goyan bayan Barometer yana samuwa [10]
Dangantakar Humidity da Sensor Zazzabi
Dangin zafi firikwensin yana auna yanayin zafi na yanayi. A matsayin Barometer, wannan firikwensin yana da na'urar firikwensin zafin jiki wanda za'a iya amfani dashi don rama ma'aunin. Lambar tushe don Laburaren Arduino wanda ke goyan bayan firikwensin Humidity yana samuwa [11]
Kusanci na Dijital, Hasken Ambient, RGB da Sensor Gesture
Lambar tushe don Laburaren Arduino wanda ke goyan bayan kusanci / motsin firikwensin ALS yana samuwa [12]
Gane motsi
Gano motsin motsi yana amfani da photodiodes na jagora guda huɗu don fahimtar ƙarfin IR mai haske (wanda aka samo ta hanyar haɗaɗɗen LED) don canza yanayin jiki.
Gano kusanci
Siffar gano kusanci tana ba da ma'aunin nesa (misali allon na'urar hannu zuwa kunnen mai amfani) ta hanyar gano photodiode na ref.
Launi da Gano ALS
Siffar gano Launi da ALS tana ba da ja, kore, shuɗi da bayyanan bayanan ƙarfin haske. Kowane tashoshi R, G, B, C suna da U
Makirufo na Dijital
MP34DT05 ƙaramin ƙarfi ne, ƙaramin ƙarfi, madaidaiciyar hanya, makirufo na dijital MEMS da aka gina tare da sigar ji mai ƙarfi da haɗin IC. Abun ganewa, mai iya gano raƙuman sauti, an ƙera shi ta amfani da tsarin micromachining na musamman na silicon wanda aka keɓe don samar da na'urori masu auna sauti.
Itace Power
Ana iya kunna allon ta hanyar haɗin USB, VIN ko VUSB fil akan masu kai.
NOTE: Tun da VUSB tana ciyar da VIN ta hanyar Schottky diode da mai sarrafa DC-DC ƙayyadaddun ƙaramar shigarwar vol.tage shine 4.5V mafi ƙarancin wadata voltage daga kebul na USB dole ne a ƙara zuwa voltage a cikin kewayon tsakanin 4.8V zuwa 4.96V dangane da halin yanzu da ake zana.
Aikin hukumar
Farawa - IDE
Idan kana so ka tsara Arduino Nano 33 BLE ɗinka yayin da kake waje kana buƙatar shigar da Arduino Desktop IDE [1] Don haɗa Arduino Nano 33 BLE zuwa kwamfutarka, zaka buƙaci kebul na USB na Micro-B. Wannan kuma yana ba da wutar lantarki ga allon, kamar yadda LED ya nuna.
Farawa - Arduino Web Edita
Duk allunan Arduino, gami da wannan, suna aiki a waje akan Arduino Web Edita [2], ta hanyar shigar da plugin mai sauƙi kawai. A Arduino Web Ana gudanar da edita akan layi, saboda haka koyaushe zai kasance na zamani tare da sabbin abubuwa da goyan baya ga duk allunan. Bi [3] don fara codeing akan mashigin yanar gizo kuma loda zane-zanen ku akan allo.
Farawa - Arduino IoT Cloud
Duk samfuran da aka kunna Arduino IoT ana tallafawa akan Arduino IoT Cloud wanda ke ba ku damar Shiga, tsarawa da tantance bayanan firikwensin, jawo abubuwan da suka faru, da sarrafa gidanku ko kasuwancin ku.
Sampda Sketches
SampZa a iya samun zane-zane na Arduino Nano 33 BLE ko dai a cikin “Examples” menu a cikin Arduino IDE ko a cikin sashin “Takardu” na Arduino Pro webshafin [4]
Albarkatun Kan layi
Yanzu da kuka wuce ta hanyar abubuwan da za ku iya yi tare da hukumar za ku iya gano abubuwan da ba su da iyaka da ke bayarwa ta hanyar duba ayyuka masu ban sha'awa akan ProjectHub [13], da Arduino Library Reference [14] da kuma kantin sayar da layi [15] inda za ku iya haɗa allonku da na'urori masu auna firikwensin, masu kunnawa da ƙari.
Farfadowar allo
Duk allunan Arduino suna da ginanniyar bootloader wanda ke ba da damar walƙiya allon ta USB. Idan zane ya kulle na'ura mai sarrafawa kuma allon ba zai iya zuwa ta hanyar USB ba yana yiwuwa a shigar da yanayin bootloader ta danna maɓallin sake saiti sau biyu bayan an kunna wuta.
Mai haɗa Pinouts
USB
| Pin | Aiki | Nau'in | Bayani |
| 1 | VUSB | Ƙarfi | Shigar da Wutar Lantarki. Idan jirgin yana aiki ta hanyar VUSB daga kan kai wannan fitarwa ce (1) |
| 2 | D- | Daban-daban | USB daban-daban data - |
| 3 | D+ | Daban-daban | USB daban-daban data + |
| 4 | ID | Analog | Yana Zaɓi Ayyukan Mai watsa shiri/Na'ura |
| 5 | GND | Ƙarfi | Power Ground |
Shugabanni
Allon yana fallasa masu haɗin fil guda 15 waɗanda ko dai za a iya haɗa su da fitilun kan layi ko kuma a siyar da su ta hanyar da aka ƙera.
| Pin | Aiki | Nau'in | Bayani |
| 1 | D13 | Dijital | GPIO |
| 2 | +3V3 | Ikon Wuta | Fitar wutar lantarki ta ciki zuwa na'urorin waje |
| 3 | AREF | Analog | Maganar Analog; za a iya amfani dashi azaman GPIO |
| 4 | A0/DAC0 | Analog | ADC cikin / DAC fita; za a iya amfani dashi azaman GPIO |
| 5 | A1 | Analog | ADC a ciki; za a iya amfani dashi azaman GPIO |
| 6 | A2 | Analog | ADC a ciki; za a iya amfani dashi azaman GPIO |
| 7 | A3 | Analog | ADC a ciki; za a iya amfani dashi azaman GPIO |
| 8 | A4/SDA | Analog | ADC a ciki; I2C SDA; Ana iya amfani dashi azaman GPIO (1) |
| 9 | A5/SCL | Analog | ADC a ciki; I2C SCL; Ana iya amfani dashi azaman GPIO (1) |
| 10 | A6 | Analog | ADC a ciki; za a iya amfani dashi azaman GPIO |
| 11 | A7 | Analog | ADC a ciki; za a iya amfani dashi azaman GPIO |
| 12 | VUSB | Wutar Shiga/Fita | Yawanci NC; ana iya haɗa shi da fil ɗin VUSB na mai haɗin kebul ta hanyar rage tsalle |
| 13 | RST | Dijital In | Ƙaramar shigarwar sake saiti mai aiki (kwafin fil 18) |
| 14 | GND | Ƙarfi | Power Ground |
| 15 | VIN | Power In | Shigar Wutar Wuta ta Vin |
| 16 | TX | Dijital | USART TX; za a iya amfani dashi azaman GPIO |
| 17 | RX | Dijital | USART RX; za a iya amfani dashi azaman GPIO |
| 18 | RST | Dijital | Ƙaramar shigarwar sake saiti mai aiki (kwafin fil 13) |
| 19 | GND | Ƙarfi | Power Ground |
| 20 | D2 | Dijital | GPIO |
| 21 | D3/PWM | Dijital | GPIO; Ana iya amfani dashi azaman PWM |
| 22 | D4 | Dijital | GPIO |
| 23 | D5/PWM | Dijital | GPIO; Ana iya amfani dashi azaman PWM |
| 24 | D6/PWM | Dijital | GPIO, ana iya amfani dashi azaman PWM |
| 25 | D7 | Dijital | GPIO |
| 26 | D8 | Dijital | GPIO |
| 27 | D9/PWM | Dijital | GPIO; Ana iya amfani dashi azaman PWM |
| 28 | D10/PWM | Dijital | GPIO; Ana iya amfani dashi azaman PWM |
| 29 | D11/MOSI | Dijital | SPI MOSI; za a iya amfani dashi azaman GPIO |
| 30 | D12/MISO | Dijital | SPI MISO; za a iya amfani dashi azaman GPIO |
Gyara kuskure
A gefen ƙasa na allon, a ƙarƙashin tsarin sadarwa, ana shirya siginonin ɓarna azaman 3 × 2 pads na gwaji tare da farar mil 100 tare da cire fil 4. Fil 1 ana kwatanta shi a Hoto na 3 - Matsayin Mai Haɗi
| Pin | Aiki | Nau'in | Bayani |
| 1 | +3V3 | Ikon Wuta | Fitar da wutar lantarki ta ciki da za a yi amfani da ita azaman voltage reference |
| 2 | SWD | Dijital | nRF52480 Bayanan Gyaran Waya Daya |
| 3 | SWCLK | Dijital In | nRF52480 Agogon Debug Waya Guda |
| 5 | GND | Ƙarfi | Power Ground |
| 6 | RST | Dijital In | Shigar da ƙananan saiti mai aiki |
Bayanin Injiniya
Bayanin allo da Ramukan Hawa
Matakan allon sun gauraya tsakanin ma'auni da na sarki. Ana amfani da matakan daular don kula da grid mil 100 tsakanin fil ɗin layi don ba su damar daidaita allon biredi yayin da tsayin allo ya kasance Metric
Takaddun shaida
Sanarwa na Daidaitawa CE DoC (EU)
Muna ayyana ƙarƙashin alhakin mu kaɗai cewa samfuran da ke sama sun dace da mahimman buƙatun ƙa'idodin EU masu zuwa don haka sun cancanci tafiya cikin 'yanci a cikin kasuwannin da suka ƙunshi Tarayyar Turai (EU) da Yankin Tattalin Arziki na Turai (EEA).
Sanarwa na Daidaitawa ga EU RoHS & ISAUTAR 211 01/19/2021
Allolin Arduino suna bin umarnin RoHS 2 2011/65/EU na Majalisar Tarayyar Turai da RoHS 3 Directive 2015/863/EU na Majalisar 4 ga Yuni 2015 kan ƙuntata amfani da wasu abubuwa masu haɗari a cikin kayan lantarki da lantarki.
| Abu | Matsakaicin iyaka (ppm) |
| Kai (Pb) | 1000 |
| Cadmium (Cd) | 100 |
| Mercury (Hg) | 1000 |
| Hexavalent Chromium (Cr6+) | 1000 |
| Poly Brominated Biphenyls (PBB) | 1000 |
| Poly Brominated Diphenyl ethers (PBDE) | 1000 |
| Bis (2-Ethylhexyl) phthalate (DEHP) | 1000 |
| Benzyl butyl phthalate (BBP) | 1000 |
| Dibutyl phthalate (DBP) | 1000 |
| Diisobutyl phthalate (DIBP) | 1000 |
Keɓancewa: Ba a da'awar keɓancewa.
Al'amuran Arduino sun cika cikar buƙatun da ke da alaƙa na Dokokin Tarayyar Turai (EC) 1907/2006 game da Rijista, Ƙimar, Izini da Ƙuntata Sinadarai (ISA). Ba mu bayyana ko ɗaya daga cikin SVHCs (https://echa.europa.eu/web/guest/candidate-list-table), Jerin abubuwan da ke da matukar damuwa don ba da izini a halin yanzu da EHA ta fitar, yana nan a cikin duk samfuran (da kuma kunshin) a cikin adadi mai yawa a cikin taro daidai ko sama da 0.1%. A iyakar saninmu, muna kuma shelanta cewa samfuranmu ba su ƙunshi ko ɗaya daga cikin abubuwan da aka jera akan "Jerin Izini" (Annex XIV na ka'idojin REACH) da Abubuwan Damuwa Mai Girma (SVHC) a cikin kowane adadi mai mahimmanci kamar ƙayyadaddun. ta Annex XVII na jerin 'yan takara da ECHA (Hukumar Sinadarai ta Turai) ta buga 1907/2006/EC.
Sanarwar Ma'adinan Rikici
A matsayinsa na mai samar da kayan lantarki da na lantarki na duniya, Arduino yana sane da wajibcinmu game da dokoki da ƙa'idodi game da Ma'adanai masu rikice-rikice, musamman Dodd-Frank Wall Street Reform and Consumer Protection Act, Sashe na 1502. Arduino ba ya samo asali ko aiwatar da rikici kai tsaye. ma'adanai irin su Tin, Tantalum, Tungsten, ko Zinariya. Ma'adanai masu rikice-rikice suna ƙunshe a cikin samfuranmu a cikin nau'in siyar, ko a matsayin wani sashi a cikin gami da ƙarfe. A matsayin wani ɓangare na ƙwazonmu mai ma'ana Arduino ya tuntuɓi masu samar da kayan aiki a cikin sarkar kayan mu don tabbatar da ci gaba da bin ƙa'idodin. Dangane da bayanan da aka samu zuwa yanzu muna bayyana cewa samfuranmu sun ƙunshi Ma'adanai masu Rikici waɗanda aka samo daga wuraren da ba su da rikici.
FCC Tsanaki
Duk wani canje-canje ko gyare-gyaren da ƙungiyar da ke da alhakin bin doka ba ta amince da su ba na iya ɓata ikon mai amfani na sarrafa kayan aiki. Wannan na'urar ta bi sashe na 15 na Dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:
- Wannan na'urar bazai haifar da tsangwama mai cutarwa ba
- dole ne wannan na'urar ta karɓi duk wani tsangwama da aka samu, gami da tsangwama wanda zai iya haifar da aiki maras so.
FCC RF Bayanin Bayyana Radiation:
- Wannan mai watsawa dole ne a kasance tare ko aiki tare tare da kowane eriya ko mai watsawa.
- Kayan aikin sa sun bi iyakokin fiddawa na RF wanda aka tsara don yanayi mara sarrafawa.
- Ya kamata a shigar da wannan kayan aikin tare da mafi ƙarancin nisa 20cm tsakanin radiyo & jikin ku.
Turanci: Littattafan mai amfani don na'urar rediyon da ba ta da lasisi za ta ƙunshi sanarwa mai zuwa ko makamancinta a cikin wani fili a cikin littafin jagorar mai amfani ko a madadin na'urar ko duka biyun. Wannan na'urar ta dace da ma'auni(s) na RSS na masana'antar Kanada. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:
- wannan na'urar bazai haifar da tsangwama ba
- dole ne wannan na'urar ta karɓi kowane tsangwama, gami da tsangwama wanda zai iya haifar da aikin da ba a so na na'urar.
Gargaɗi na IC SAR:
Turanci Ya kamata a shigar da sarrafa wannan kayan aiki tare da mafi ƙarancin nisa 20 cm tsakanin radiyo da jikin ku. Ta haka, Arduino Srl ya bayyana cewa wannan samfurin ya dace da mahimman buƙatu da sauran tanadin da suka dace na Umarnin 2014/53/EU. An ba da izinin amfani da wannan samfurin a duk ƙasashe membobin EU.
| Makadan mitar | Matsakaicin ƙarfin fitarwa (ERP) |
| 863-870Mhz | 5.47 dBm |
Bayanin Kamfanin
| Sunan kamfani | Arduino Srl |
| Adireshin Kamfanin | Ta hanyar Andrea Appiani 25 20900 MONZA Italiya |
Takardun Magana
| Magana | mahada |
| Arduino IDE (Desktop) | https://www.arduino.cc/en/Main/Software |
| Arduino IDE (Cloud) | https://create.arduino.cc/editor |
| Cloud IDE Ana Farawa | https://create.arduino.cc/projecthub/Arduino_Genuino/getting-started-with-arduino-web-editor-4b3e4a |
| Dandalin | http://forum.arduino.cc/ |
| Nina B306 | https://www.u-blox.com/sites/default/files/NINA-B3_DataSheet_%28UBX-17052099%29.pdf |
| Saukewa: ECC608 | http://ww1.microchip.com/downloads/en/DeviceDoc/40001977A.pdf |
| Saukewa: MPM3610 | https://www.monolithicpower.com/pub/media/document/MPM3610_r1.01.pdf |
| Bayanan Bayani na ECC608 | https://github.com/arduino-libraries/ArduinoECCX08 |
| LSM6DSL | https://github.com/adafruit/Adafruit_LSM9DS1 |
| Saukewa: LPS22HB | https://github.com/stm32duino/LPS22HB |
| HTS221 Library | https://github.com/stm32duino/HTS221 |
| Bayanan Bayani na APDS9960 | https://github.com/adafruit/Adafruit_APDS9960 |
| ProjectHub | https://create.arduino.cc/projecthub?by=part&part_id=11332&sort=trending |
| Maganar Laburare | https://www.arduino.cc/reference/en/ |
Tarihin Bita
| Kwanan wata | Bita | Canje-canje |
| 04/27/2021 | 1 | Sabunta takaddar bayanan gabaɗaya |
Takardu / Albarkatu
 |
ARDUINO ABX00031 Nano 33 BLE Sense Module [pdf] Manual mai amfani ABX00031, Nano 33 BLE Sense, Module, Nano 33 BLE Sense Module, ABX00031 Nano 33 BLE Sense Module |
