ARDUINO ABX00031 Nano 33 BLE Sense Module
Nkọwa
Nano 33 BLE Sense bụ modul nwere obere nha nwere NINA B306 modul, dabere na Nordic nRF52480 yana nwere Cortex M4F, mgbawa crypto nke nwere ike chekwaa asambodo na igodo ekekọrịtaburu na axis 9 IMU. Enwere ike itinye modul ahụ dị ka akụrụngwa DIP (mgbe ị na-ebunye isi ntụtụ), ma ọ bụ dị ka akụrụngwa SMT, na-ere ya ozugbo site na paịlị nke castellated.
Ebe ebumnuche:
Onye mepụtara, nkwalite, ngwa IoT
Atụmatụ
NINA B306 Modul
Nhazi
- 64 MHz Arm® Cortex-M4F (ya na FPU)
- 1 MB Flash + 256 KB RAM
Bluetooth 5 multiprotocol redio
- 2 Mbps
- CSA #2
- Mgbatị mgbasa ozi
- Ogologo ogologo
- + 8 dBm TX ike
- -95 dBm mmetụta
- 4.8mA na TX (0 dBm)
- 4.6mA na RX (1 Mbps)
- Balun agbakwunyere nwere mmepụta nwere ngwụcha otu 50 Ω
- IEEE 802.15.4 nkwado redio
- eri
- Zigbee
Akụkụ
- Ọsọ zuru oke 12Mbps USB
- NFC-A tag
- Arm CryptoCell CC310 nchekwa subsystem QSPI/SPI/TWI/I²S/PDM/QDEC
- Ọsọ dị elu 32 MHz SPI
- Quad SPI interface 32 MHz
- EasyDMA maka oghere dijitalụ niile
- 12-bit 200 kps ADC
- 128-bit AES/ECB/CCM/AAR ngalaba-processor
LSM9DS1 (9 axis IMU)
- Ọwa osooso 3, ọwa ọnụego akụkụ 3, ọwa ndọta 3.
- ± 2 / 4 / ± 8 / ± 16 g linear osooso zuru oke
- ± 4 / 8 / ± 12 / ± 16 gauss magnetik zuru oke
- ± 245 / ± 500 / ± 2000 dps ọnụ ọgụgụ angular zuru oke
- 16-bit data mmepụta
LPS22HB (Barometer na ihe mmetụta okpomọkụ)
- 260 ruo 1260 hPa zuru oke nrụgide nwere nkenke 24 bit
- Ikike nrụgide dị elu: 20x zuru oke
- Nkwụghachi ụgwọ okpomọkụ agbakwunyere
- Mmepụta data okpomọkụ 16-bit
- Ọnụego mmepụta 1 Hz ruo 75 Hz na-akwụsị ọrụ: Njikere data, ọkọlọtọ FIFO, ọnụ ụzọ nrụgide.
HTS221 (ihe mmetụta iru mmiri dị ala)
- 0-100% ikwu iru mmiri oke
- Mmetụta rH dị elu: 0.004% rH/LSB
- Iru mmiri ziri ezi: ± 3.5% rH, 20 ruo + 80% rH
- Okpomọkụ ziri ezi: ± 0.5 °C,15 ruo +40 Celsius
- 16-bit iru mmiri na data mmepụta okpomọkụ
APDS-9960 (dijitalụ nso, ọkụ gburugburu, RGB na ihe mmetụta mmegharị)
- Ambient Light na RGB Agba Sensing nwere ihe nzacha UV na IR
- Nnukwu mmetụta dị elu - Kwesịrị ekwesị maka ịrụ ọrụ n'azụ iko gbara ọchịchịrị
- Mmetụta ịdị nso na ọjụjụ ọkụ Ambient
- Mgbagwoju anya mmegharị ahụ
MP34DT05 (igwe okwu dijitalụ)
- AOP = 122.5 dbSPL
- Oke mgbama na mkpọtụ 64dB
- Mmetụta uche n'ebe niile
- -26 dBFS ± 3 dB uche
ATECC608A (Crypto Chip)
- Onye na-arụkọ ọrụ cryptographic nwere nchekwa igodo dabere na ngwaike echekwara
- Nchekwa echedoro maka igodo iri na isii, asambodo ma ọ bụ data
- ECDH: FIPS SP800-56A Elliptic Curve Difie-Hellman
- NIST ọkọlọtọ P256 elliptical curve nkwado
- SHA-256 & HMAC hash gụnyere mwepu-chip onodu nchekwa nchekwa/iweghachi
- AES-128 encrypt/decrypt, galois na-amụba maka GCM
MPM3610 DC-DC
- Na-ahazi ntinye voltage si ruo 21V nwere opekempe nke 65% arụmọrụ @ kacha nta
- Karịrị 85% arụmọrụ @12V
ọdịnaya
- The Board
- Ogo
- Ọnọdụ ọrụ akwadoro
- Oriri ike
- Arụ ọrụ gafereview
- Board Topology
- Nhazi
- Crypto
- IMU
- Barometer na ihe mmetụta okpomọkụ
- Ihe mmetụta iru mmiri na ọnọdụ okpomọkụ
- Digital Proximity, Ambient Light, RGB and Gesture Sensor
- Nchọpụta mmegharị ahụ
- Nchọpụta ịdị nso
- Agba na nchọpụta ALS
- Igwe okwu dijitalụ
- Osisi Ike
- Ọrụ Board
- Mmalite – IDE
- Mmalite – Arduino Web Onye nchịkọta akụkọ
- Mmalite – Arduino IoT Cloud
- Sampna Sketches
- Ngwa ntanetị
- Iweghachite Board
- Pinouts njikọ
- USB
- nkụnye eji isi mee
- Mebie
- Ozi igwe
- Ngosipụta osisi na oghere nrịgo
- Asambodo
- Nkwupụta nke Nkwekọrịta CE DoC (EU)
- Nkwupụta nke Nkwekọrịta na EU RoHS & REACH 211 01/19/2021
- Nkwuwapụta Mineral esemokwu
- FCC ịkpachara anya
- Ozi ụlọ ọrụ
- Akwụkwọ ntụaka
- Akụkọ ngbanwe
The Board
Dịka bọọdụ ụdị Nano niile, Nano 33 BLE Sense enweghị chaja batrị mana enwere ike ịkwado ya site na USB ma ọ bụ nkụnye eji isi mee.
IHE: Arduino Nano 33 BLE Sense na-akwado naanị 3.3VI / Os na ọ bụghị 5V na-anabata ya, biko hụ na ị naghị ejikọta akara 5V na bọọdụ a ma ọ bụ na ọ ga-emebi. Ọzọkwa, n'adịghị ka bọọdụ Arduino Nano na-akwado ọrụ 5V, pin 5V anaghị enye vol.tage mana ejikọrọ ya, site na jumper, na ntinye ike USB.
Ogo
Ọnọdụ ọrụ akwadoro
| Akara | Nkọwa | Min | Oke |
| Oke thermal Conservative maka bọọdụ dum: | -40 Celsius (40 Celsius) | 85°C (185°F) |
Oriri ike
| Akara | Nkọwa | Min | Ụdị | Oke | Nkeji |
| PBL | Oriri ike na akaghị aka | TBC | mW | ||
| PLP | Oriri ike na ọnọdụ ike dị ala | TBC | mW | ||
| PMAX | Oriri ike kacha | TBC | mW |
Arụ ọrụ gafereview
Board Topology
| Ref. | Nkọwa | Ref. | Nkọwa |
| U1 | NINA-B306 Modul BLE 5.0 Modul | U6 | MP2322GQH Ntụgharị Nkwụghachi azụ |
| U2 | LSM9DS1TR ihe mmetụta IMU | PB1 | IT-1185AP1C-160G-GTR bọtịnụ pịa |
| U3 | MP34DT06JTR Mems Igwe okwu | HS-1 | Ihe mmetụta iru mmiri HTS221 |
| U4 | ATECC608A mgbawa Crypto | DL1 | Onye ndu L |
| U5 | APDS-9660 Ambient Modul | DL2 | Ike idu |
| Ref. | Nkọwa | Ref. | Nkọwa |
| SJ1 | VUSB jumper | SJ2 | D7 jumper |
| SJ3 | 3v3 onye na-awụlikwa elu | SJ4 | D8 jumper |
Nhazi
Main Processor bụ Cortex M4F na-agba ọsọ ruo 64MHz. Ọtụtụ n'ime ntụtụ ya jikọtara ya na isi nkụnye eji isi mee, Otú ọ dị, ụfọdụ echekwabara maka nkwurịta okwu n'ime ya na modul ikuku na n'ime ime ime I2C (IMU na Crypto).
IHE: N'adịghị ka bọọdụ Arduino Nano ndị ọzọ, atụdo A4 na A5 nwere ndọpụta dị n'ime yana ndabara nke a ga-eji dị ka ụgbọ ala I2C yabụ akwadoghị iji ya dị ka ntinye analog.
Crypto
Ihe mgbawa crypto dị na bọọdụ Arduino IoT bụ ihe na-eme ka ọdịiche dị na bọọdụ ndị ọzọ na-enweghị nchebe n'ihi na ọ na-enye ụzọ echedoro iji chekwaa ihe nzuzo (dị ka asambodo) ma na-eme ka usoro nchekwa dị ngwa ngwa n'agbanyeghị na ọ naghị ekpughe ihe nzuzo na ederede doro anya. Koodu isi mmalite maka ọba akwụkwọ Arduino na-akwado Crypto dị [8]
IMU
Arduino Nano 33 BLE nwere 9 axis IMU agbakwunyere nke enwere ike iji tụọ nghazi bọọdụ (site n'ịlele nghazi vector acceleration ike ndọda ma ọ bụ site na iji kompas 3D) ma ọ bụ tụọ ujo, ịma jijiji, osooso na ntụgharị ntụgharị. Koodu isi mmalite maka ọba akwụkwọ Arduino na-akwado IMU dị [9]
Barometer na ihe mmetụta okpomọkụ
Barometer agbakwunyere na ihe mmetụta okpomọkụ na-enye ohere iji tụọ nrụgide gburugburu. Enwere ike iji ihe mmetụta okpomọkụ agbakwunyere na barometer iji kwụọ ụgwọ nrụgide. Koodu isi mmalite maka ọba akwụkwọ Arduino na-akwado Barometer dị [10]
Ihe mmetụta iru mmiri na ọnọdụ okpomọkụ
Ihe mmetụta iru mmiri dị ala na-atụ iru iru mmiri gburugburu. Dị ka Barometer, ihe mmetụta a nwere ihe mmetụta okpomọkụ agbakwunyere nke enwere ike iji kwụọ ụgwọ maka nha. Koodu isi mmalite maka ọba akwụkwọ Arduino na-akwado ihe mmetụta iru mmiri dị [11]
Digital Proximity, Ambient Light, RGB and Gesture Sensor
Koodu isi mmalite maka ọba akwụkwọ Arduino na-akwado nso nso/mmegharị ahụ/ALS sensọ dị [12]
Nchọpụta mmegharị ahụ
Nchọpụta mmegharị ahụ na-eji photodiodes ntụzịaka anọ iji chọpụta ike IR gosipụtara (nke sitere na LED agbakwunyere) iji gbanwee physics.
Nchọpụta ịdị nso
Njirimara nchọpụta nso nso na-enye nha anya (dịka ihuenyo ngwaọrụ mkpanaka na ntị onye ọrụ) site na nchọpụta photodiode nke ref.
Agba na nchọpụta ALS
Njirimara nchọpụta Agba na ALS na-enye data ike ọkụ na-acha uhie uhie, akwụkwọ ndụ akwụkwọ ndụ, acha anụnụ anụnụ na doro anya. Nke ọ bụla n'ime ọwa R, G, B, C nwere U
Igwe okwu dijitalụ
MP34DT05 bụ kọmpat ultra-compact, ike dị ala, omnidirectional, igwe okwu MEMS dijitalụ wuru yana ihe nhụta ike yana interface IC. A na-arụpụta ihe na-ahụ ihe, nke nwere ike ịchọpụta ebili mmiri dị egwu, site na iji usoro micromachining silicon pụrụ iche a raara nye iji mepụta sensọ ọdịyo.
Osisi Ike
Enwere ike ịgbanye osisi ahụ site na eriri USB, VIN ma ọ bụ VUSB ntụtụ na nkụnye eji isi mee.
IHE: Ebe ọ bụ na VUSB na-enye VIN nri site na Schottky diode yana onye na-achịkwa DC-DC kọwapụtara ntinye ntinye kacha nta.tage bụ 4.5V kacha nta ọkọnọ voltage si na USB ga-abawanye na voltage na nso n'etiti 4.8V ka 4.96V dabere na ugbu a na-adọta.
Ọrụ Board
Mmalite – IDE
Ọ bụrụ na ịchọrọ ịme mmemme Arduino Nano 33 BLE gị mgbe ị nọ n'èzí, ịkwesịrị ịwụnye Arduino Desktop IDE [1] Iji jikọọ Arduino Nano 33 BLE na kọmputa gị, ị ga-achọ eriri USB Micro-B. Nke a na-enyekwa ike na osisi ahụ, dị ka LED gosipụtara.
Mmalite – Arduino Web Onye nchịkọta akụkọ
Bọdụ Arduino niile, gụnyere nke a, na-arụ ọrụ nke ọma na Arduino Web Editor [2], site na ịwụnye ngwa mgbakwunye dị mfe. Arduino Web A na-akwado onye nchịkọta akụkọ n'ịntanetị, ya mere ọ ga-adị ọhụrụ mgbe niile site na njirimara na nkwado maka bọọdụ niile. Soro [3] ka ịmalite itinye koodu na ihe nchọgharị wee bulite ihe osise gị na bọọdụ gị.
Mmalite – Arduino IoT Cloud
A na-akwado ngwaahịa Arduino IoT niile na Arduino IoT Cloud nke na-enye gị ohere ịbanye, eserese na nyochaa data sensọ, kpalite ihe omume, wee rụzie ụlọ ma ọ bụ azụmahịa gị.
Sampna Sketches
SampEnwere ike ịhụ ihe osise maka Arduino Nano 33 BLE ma na “Examples” menu na Arduino IDE ma ọ bụ na ngalaba “Akwụkwọ” nke Arduino Pro websaịtị [4]
Ngwa ntanetị
Ugbu a na ị gafere isi ihe ị nwere ike ime na bọọdụ ị nwere ike ịchọpụta ohere na-adịghị agwụ agwụ ọ na-enye site na ịlele ọrụ ndị na-akpali akpali na ProjectHub [13], Arduino Library Reference [14] na ụlọ ahịa dị n'ịntanetị [15] ebe. ị ga-enwe ike iji sensọ, actuators na ndị ọzọ mejuo osisi gị.
Iweghachite Board
Bọdụ Arduino niile nwere ihe nrụnye bootloader nke na-enye ohere iji eriri USB na-ebunye bọọdụ ahụ. Ọ bụrụ na eserese kpuchiri ihe nrụpụta na bọọdụ ahụ enweghị ike iru ọzọ site na USB ọ ga-ekwe omume ịbanye ọnọdụ bootloader site na ịpị bọtịnụ nrụpụta ugboro abụọ ozugbo emechara.
Pinouts njikọ
USB
| Ntụtụ | Ọrụ | Ụdị | Nkọwa |
| 1 | VUSB | Ike | Ntinye ntinye ike. Ọ bụrụ na ejiri VUSB kwadoro bọọdụ site na nkụnye eji isi mee nke a bụ ihe nrụpụta (1) |
| 2 | D- | dị iche iche | USB data dị iche iche - |
| 3 | D+ | dị iche iche | USB data dị iche iche + |
| 4 | ID | Analọg | Na-ahọpụta ọrụ onye ọbịa/ngwaọrụ |
| 5 | GND | Ike | Ala Ike |
nkụnye eji isi mee
Bọdụ ahụ na-ekpughe njikọ njikọ pin 15 abụọ nke enwere ike ijikọ nkụnye ntụtụ ma ọ bụ were ya na-ere ya site na vias castellated.
| Ntụtụ | Ọrụ | Ụdị | Nkọwa |
| 1 | D13 | Dijitalụ | GPIO |
| 2 | + 3V3 | Nwepu Ike | Mbupute ike dị n'ime na ngwaọrụ mpụga |
| 3 | AREF | Analọg | Ntuziaka Analog; enwere ike iji ya dị ka GPIO |
| 4 | A0/DAC0 | Analọg | ADC na/DAC pụọ; enwere ike iji ya dị ka GPIO |
| 5 | A1 | Analọg | ADC n'ime; enwere ike iji ya dị ka GPIO |
| 6 | A2 | Analọg | ADC n'ime; enwere ike iji ya dị ka GPIO |
| 7 | A3 | Analọg | ADC n'ime; enwere ike iji ya dị ka GPIO |
| 8 | A4/SDA | Analọg | ADC n'ime; I2C SDA; Enwere ike iji ya dị ka GPIO (1) |
| 9 | A5/SCL | Analọg | ADC n'ime; I2C SCL; Enwere ike iji ya dị ka GPIO (1) |
| 10 | A6 | Analọg | ADC n'ime; enwere ike iji ya dị ka GPIO |
| 11 | A7 | Analọg | ADC n'ime; enwere ike iji ya dị ka GPIO |
| 12 | VUSB | Ịbata/Ọpụpụ | Na-emekarị NC; enwere ike ijikọ na pin VUSB nke njikọ USB site na mbelata jumper |
| 13 | RST | Digital In | Ntinye nrụpụta dị ala na-arụ ọrụ (ụdị nke pin18) |
| 14 | GND | Ike | Ala Ike |
| 15 | VIN | Ike In | Ntinye ike Vin |
| 16 | TX | Dijitalụ | USART TX; enwere ike iji ya dị ka GPIO |
| 17 | RX | Dijitalụ | USART RX; enwere ike iji ya dị ka GPIO |
| 18 | RST | Dijitalụ | Ntinye nrụpụta dị ala na-arụ ọrụ (ụdị nke pin13) |
| 19 | GND | Ike | Ala Ike |
| 20 | D2 | Dijitalụ | GPIO |
| 21 | D3/PWM | Dijitalụ | GPIO; enwere ike iji ya dị ka PWM |
| 22 | D4 | Dijitalụ | GPIO |
| 23 | D5/PWM | Dijitalụ | GPIO; enwere ike iji ya dị ka PWM |
| 24 | D6/PWM | Dijitalụ | GPIO, enwere ike iji dị ka PWM |
| 25 | D7 | Dijitalụ | GPIO |
| 26 | D8 | Dijitalụ | GPIO |
| 27 | D9/PWM | Dijitalụ | GPIO; enwere ike iji ya dị ka PWM |
| 28 | D10/PWM | Dijitalụ | GPIO; enwere ike iji ya dị ka PWM |
| 29 | D11/MOSI | Dijitalụ | SPI MOSI; enwere ike iji ya dị ka GPIO |
| 30 | D12/MISO | Dijitalụ | SPI MISO; enwere ike iji ya dị ka GPIO |
Mebie
N'akụkụ ala nke osisi ahụ, n'okpuru modul nkwurịta okwu, a na-ahazi akara ngosi debug dị ka 3 × 2 test pads na 100 mil pitch na pin 4 wepụ. A na-egosi pin 1 na eserese 3 - Ọnọdụ njikọ
| Ntụtụ | Ọrụ | Ụdị | Nkọwa |
| 1 | + 3V3 | Nwepu Ike | Mpụta ike emepụtara n'ime ga-eji dị ka voltage ntụaka |
| 2 | SWD | Dijitalụ | nRF52480 Otu data nbipu waya |
| 3 | SWCLK | Digital In | nRF52480 Otu elekere nbipu waya |
| 5 | GND | Ike | Ala Ike |
| 6 | RST | Digital In | Ntinye nrụpụta dị ala na-arụ ọrụ |
Ozi igwe
Ngosipụta osisi na oghere nrịgo
Ngwakọta bọọdụ ahụ na-agwakọta n'etiti metric na imperial. A na-eji ihe ndị eze ukwu na-edobe grid 100 mil pitch n'etiti ahịrị pin ka ha kwenye ka ha dabara na bọọdụ achịcha ebe ogologo osisi bụ Metric.
Asambodo
Nkwupụta nke Nkwekọrịta CE DoC (EU)
Anyị na-ekwupụta n'okpuru ọrụ anyị naanị na ngwaahịa ndị dị n'elu kwekọrọ na ihe ndị dị mkpa nke ntuziaka EU na-esote ya mere tozuru oke maka mmegharị n'efu n'ime ahịa nke nwere European Union (EU) na European Economic Area (EEA).
Nkwupụta nke Nkwekọrịta na EU RoHS & REACH 211 01/19/2021
bọọdụ Arduino kwekọrọ na RoHS 2 Directive 2011/65/EU nke European nzuko omeiwu na RoHS 3 Directive 2015/863/EU nke Council of 4 June 2015 na mmachi nke ojiji nke ụfọdụ ize ndụ ihe na ngwa eletriki na eletrọnịkị.
| Ihe | Oke kacha (ppm) |
| Ndu (Pb) | 1000 |
| Ogwugwu (Cd) | 100 |
| Ebere (Hg) | 1000 |
| Chromium Hexavalent (Cr6+) | 1000 |
| Poly Brominated Biphenyls (PBB) | 1000 |
| Poly Brominated Diphenyl ethers (PBDE) | 1000 |
| Bis (2-Ethylhexyl} phthalate (DEHP) | 1000 |
| Benzyl butyl phthalate (BBP) | 1000 |
| Dibutyl phthalate (DBP) | 1000 |
| Diisobutyl phthalate (DIBP) | 1000 |
Mwepu: Enweghị mwepu a na-ekwu.
Boards Arduino na-akwado nke ọma na ihe ndị metụtara European Union Regulation (EC) 1907/2006 gbasara ndebanye aha, nyocha, ikike na mmachi nke kemịkalụ (REACH). Anyị na-ekwupụta na ọ nweghị nke SVHCs (https://echa.europa.eu/web/guest/candidate-list-table), Ndepụta ndị Candidate nke ihe dị oke mkpa maka ikike nke ECHA wepụtara ugbu a, dị na ngwaahịa niile (yana ngwugwu) n'ogo zuru oke na mkpokọta nha ma ọ bụ karịa 0.1%. Dị ka ihe ọmụma anyị si mara, anyị na-ekwupụtakwa na ngwaahịa anyị enweghị ihe ọ bụla e depụtara na "Ndepụta ikike" (Annex XIV nke ụkpụrụ REACH) na ihe gbasara nchegbu dị oke elu (SVHC) n'ụdị ọ bụla dị mkpa dị ka akọwapụtara. site na Mgbakwunye XVII nke ndepụta Candidate bipụtara EHA (European Chemical Agency) 1907/2006/EC.
Nkwupụta mineral esemokwu
Dị ka onye na-eweta ihe elektrọnik na eletriki eletrik zuru ụwa ọnụ, Arduino maara ọrụ anyị na-ahụ maka iwu na ụkpụrụ gbasara Mineral Conflict, kpọmkwem Dodd-Frank Wall Street Reform and Consumer Protection Act, Nkebi 1502. Arduino anaghị ebute ma ọ bụ hazie esemokwu ozugbo. mineral dị ka Tin, Tantalum, Tungsten, ma ọ bụ ọla edo. Ngwakọta mineral ndị na-ese okwu dị n'ime ngwaahịa anyị n'ụdị ihe na-ere ahịa, ma ọ bụ dị ka akụrụngwa na alloys ọla. Dịka akụkụ nke mbọ anyị kwesịrị ekwesị Arduino akpọtụrụla ndị na-ebubata akụrụngwa n'ime ụdọ ọkọnọ anyị iji chọpụta na ha nọgidere na-agbaso ụkpụrụ ahụ. Dabere na ozi enwetara ugbu a, anyị na-ekwupụta na ngwaahịa anyị nwere Mineral Conflict sitere na mpaghara enweghị nsogbu.
FCC ịkpachara anya
Mgbanwe ọ bụla ma ọ bụ mgbanwe ọ bụla nke ndị otu na-ahụ maka nnabata na-akwadoghị nke ọma nwere ike imebi ikike onye ọrụ iji rụọ ngwa ahụ. Ngwa a na-akwado akụkụ 15 nke Iwu FCC. A na-arụ ọrụ n'okpuru ọnọdụ abụọ a:
- Ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya na-emerụ ahụ
- Ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla enwetara, gụnyere nnyonye anya nwere ike ibute ọrụ na-achọghị.
Nkwupụta Mkpughe Radiation FCC RF:
- Agaghị ejikọta ihe nnyefe a ma ọ bụ na-arụ ọrụ na njikọ antenna ma ọ bụ nnyefe ọ bụla ọzọ.
- akụrụngwa ya na-akwado oke mkpughe radieshon RF ewepụtara maka gburugburu enweghị njikwa.
- Ekwesịrị ịwụnye akụrụngwa a ma rụọ ọrụ ya na anya kacha nta 20cm n'etiti radiator & ahụ gị.
Igbo: Akwụkwọ ntuziaka onye ọrụ maka ngwa redio enweghị ikike ga-enwe ọkwa ndị a ma ọ bụ nha nhata n'ebe pụtara ìhè n'ime akwụkwọ ntuziaka onye ọrụ ma ọ bụ ọzọ na ngwaọrụ ma ọ bụ ha abụọ. Ngwaọrụ a na-akwado ụkpụrụ (s) RSS enweghị ikike ụlọ ọrụ Canada. A na-arụ ọrụ n'okpuru ọnọdụ abụọ a:
- ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya
- Ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla, gụnyere nnyonye anya nwere ike bute ọrụ ngwaọrụ ahụ achọghị.
Ịdọ aka ná ntị IC SAR:
Asụsụ a kwesịrị ịwụnye ma rụọ ọrụ ya na anya kacha nta 20 cm n'etiti radiator na ahụ gị. Site na nke a, Arduino Srl na-ekwupụta na ngwaahịa a kwekọrọ na ihe ndị dị mkpa chọrọ yana ndokwa ndị ọzọ dị mkpa nke Ntuziaka 2014/53/EU. Ekwenyere ka ejiri ngwaahịa a na mba ndị otu EU niile.
| Ugboro ugboro | Ike mmepụta kacha (ERP) |
| 863-870Mhz | 5.47 dBm |
Ozi ụlọ ọrụ
| Aha Ụlọ Ọrụ | Arduino Srl |
| Adreesị ụlọ ọrụ | Site na Andrea Appiani 25 20900 MONZA Italy |
Akwụkwọ ntụaka
| Ntụaka | Njikọ |
| Arduino IDE (Desktọpụ) | https://www.arduino.cc/en/Main/Software |
| Arduino IDE (igwe ojii) | https://create.arduino.cc/editor |
| Cloud IDE na-amalite | https://create.arduino.cc/projecthub/Arduino_Genuino/getting-started-with-arduino-web-editor-4b3e4a |
| Nzukọ | http://forum.arduino.cc/ |
| Nina B306 | https://www.u-blox.com/sites/default/files/NINA-B3_DataSheet_%28UBX-17052099%29.pdf |
| ECC608 | http://ww1.microchip.com/downloads/en/DeviceDoc/40001977A.pdf |
| MPM3610 | https://www.monolithicpower.com/pub/media/document/MPM3610_r1.01.pdf |
| Ụlọ akwụkwọ ECC608 | https://github.com/arduino-libraries/ArduinoECCX08 |
| Ụlọ akwụkwọ LSM6DSL | https://github.com/adafruit/Adafruit_LSM9DS1 |
| LPS22HB | https://github.com/stm32duino/LPS22HB |
| Ụlọ akwụkwọ HTS221 | https://github.com/stm32duino/HTS221 |
| Ụlọ akwụkwọ APDS9960 | https://github.com/adafruit/Adafruit_APDS9960 |
| ProjectHub | https://create.arduino.cc/projecthub?by=part&part_id=11332&sort=trending |
| Ntụaka ụlọ akwụkwọ | https://www.arduino.cc/reference/en/ |
Akụkọ ngbanwe
| Ụbọchị | Ndozigharị | Mgbanwe |
| 04/27/2021 | 1 | Mmelite akwụkwọ data izugbe |
Akwụkwọ / akụrụngwa
 |
ARDUINO ABX00031 Nano 33 BLE Sense Module [pdf] Akwụkwọ ntuziaka onye ọrụ ABX00031, Nano 33 BLE Sense, Module, Nano 33 BLE Sense Module, ABX00031 Nano 33 BLE Sense Module |
