AOC 22B15H2 LCD Mataitu
Saogalemu
Fonotaga a le Atunuu
O vaega o lo'o mulimuli mai o lo'o fa'amatala ai tu'utu'uga fa'aigoaina o lo'o fa'aogaina i lenei pepa.
Faamatalaga, Lapataiga, ma Lapataiga
I totonu o lenei ta'iala, o poloka o tusitusiga e mafai ona fa'atasi ma se fa'aikona ma lolomi i le mata'utia po'o le fa'atusilima. O poloka nei o faʻamatalaga, lapataiga, ma lapataiga, ma o loʻo faʻaaogaina e pei ona taua i lalo:
FAAMANATU: O SE FAAMANATU o loʻo faʻaalia ai faʻamatalaga taua e fesoasoani ia te oe e faʻaoga lelei lau komepiuta.
FAATUATUA: O LE FA'AMATALAGA o lo'o fa'aalia ai le fa'aleagaina o masini po'o le leiloa o fa'amaumauga ma ta'u atu ia te oe le auala e aloese ai mai le fa'afitauli.
LAPATAIGA: O LE LAPATA'IGA e fa'ailoa mai ai le ono afaina ai o le tino ma ta'u atu ia te oe le auala e aloese ai mai le fa'afitauli. O nisi o lapata'iga e ono aliali mai i isi fa'asologa ma atonu e le o fa'atasi ma se fa'ailoga. I ia tulaga, o le tuʻuina atu faʻapitoa o le lapataiga e faʻatonuina e le pulega faʻatonutonu.
Malosiaga
- O le mata'itu e tatau ona fa'agaioia na'o le ituaiga o puna eletise o lo'o fa'aalia i luga o le fa'ailoga. Afai e te le o mautinoa po'o le a le ituaiga paoa o lo'o tu'uina atu i lou fale, fa'afeso'ota'i lau fa'atau po'o le kamupani eletise.
- O le mataʻituina o loʻo faʻapipiʻiina i se palaka faʻavae e tolu, o se polo ma se pine lona tolu (grounding). O lenei palaka e na'o le so'o eletise ua fa'amauina e fa'atatau i le saogalemu. Afai e le ofi i lau so'o le palaka e tolu uaea, fai i se fai eletise e fa'apipi'i le so'o sa'o, pe fa'aaoga se mea fa'apipi'i e fa'amalo saogalemu ai le masini. Aua nei fa'ato'ilaloina le fa'amoemoega saogalemu o le polo fa'avae.
- Aveese le masini i le taimi o se matagi uila poʻo le taimi e le faʻaaogaina mo se taimi umi. O lenei mea o le a puipuia ai le mataʻituina mai le faʻaleagaina ona o le malosi o le eletise.
- Aua ne'i soona utaina fasipepa eletise ma uaea fa'alautele. O le tele o uta e mafai ona tupu ai se afi po'o se eletise.
- Ina ia mautinoa le fa'amalieina o le fa'agaioiga, fa'aoga le mata'itū fa'atasi ma UL lisi komipiuta o lo'o i ai fa'amau fa'apipi'i talafeagai fa'ailoga i le va o le 100-240V AC, Min. 5A.
- The wall socket shall be installed near the equipment and shall be easily accessible. A For use only with included power adapter:
- Tufuga: Shenzhen Suoyuan Technology Co., Ltd.
- Fa'ata'ita'iga: SOY-1200200EU-539
Fa'apipi'i
- Aua le tu'u le mata'itu i luga o se taavale toso, tulaga, tripod, puipui, po'o se laulau. Afai e pa'ū le mata'itū, e mafai ona manu'a ai se tagata ma fa'aleagaina ai lenei oloa. Fa'aaoga na'o se taavaletoso, tulaga, tripod, puipui, po'o se laulau fautuaina e le gaosi oloa pe fa'atau atu ma lenei oloa. Mulimuli i fa'atonuga a le gaosi oloa pe a fa'apipi'i le oloa ma fa'aoga mea fa'apipi'i e fautuaina e le kamupani gaosi mea. E tatau ona fa'agaioi ma le fa'aeteete se fa'aputuga o oloa ma fa'ato'aga.
- Aua le tuleia soo se mea i totonu o le avanoa i luga o le kapoti mata'itu. E mafai ona fa'aleagaina vaega ta'avale e mafua ai se afi po'o se eletise. Aua ne'i masaa ni vai i luga ole mata.
- Aua le tuʻu le pito i luma o le oloa ile fola.
- Afai e te fa'apipi'i le mata'itū i luga o se puipui po'o se fata, fa'aaoga se pusa fa'apipi'i fa'amaonia e le kamupani gaosi ma mulimuli i fa'atonuga o le pusa.
- Tu'u sina avanoa fa'ata'amilo ile mata e pei ona fa'aalia i lalo. A leai, atonu e le lava le ta'amilosaga o le ea ona o le vevela tele e ono mafua ai se afi pe fa'aleagaina le mata'itū.
- Ina ia aloese mai le faaleagaina, mo se faataitaigaamptu'u le laulau e pa'u mai le bezel, fa'amautinoa e le fa'asaga i lalo le mata'itu i le sili atu i le -5 tikeri. Afai e sili atu le maualuga o le -5 tikeri agai i lalo, o le a le ufiufiina le faaleagaina o le mata i lalo o le tusi saisai.
- Va'ai i lalo vaega fa'alelei fautuaina i tafatafa o le mata'itū pe a fa'apipi'i le mata'itū i luga o le puipui po'o luga o le tulaga:
Fa'apipi'i ma tu
Fa'amamaina
- Fa'amama le kapoti i taimi uma i ie. E mafai ona e fa'aogaina le pa'u vaivai e tape ai le pisia, nai lo le fa'amama malosi lea e fa'amama ai le kapoti oloa.
- Pe a fa'amamā, ia mautinoa e leai se vaila'au e tafe i totonu o le oloa. O le ie fa'amama e le tatau ona talatala tele ona o le a valu ai le lau.
- Fa'amolemole motusia le uaea eletise a'o le'i fa'amama le oloa.
Isi
- Afai o lo'o tu'u mai e le oloa se manogi uiga ese, leo po'o le asu, ia ta'e loa le polo eletise ma fa'afeso'ota'i se Nofoaga Autu.
- Ia mautinoa e le o punitia e se laulau poʻo se pupuni avanoa e faʻafefe ai.
- Aua le fa'aogaina le mata'itusi LCD i le tele o le tetete po'o le maualuga o le a'afiaga i le taimi o le taotoga.
- Aua le tu'itu'i pe faapa'u le mata i le taimi o le taotoga po o felauaiga.
Seti
Anotusi i le Pusa 
* E le o fa'ailoga uma uaea o le a tu'uina atu mo atunu'u uma ma itulagi. Fa'amolemole fa'afeso'ota'i le fa'atau i le lotoifale po'o le ofisa o le lālā o le AOC mo se fa'amaoniga.
Seti Tu'u & Fa'avae
Fa'amolemole fa'atulaga pe aveese le fa'avae e mulimuli i la'asaga e pei ona i lalo.
Seti: 
Aveese: 
Fetuunaiga Viewi le Angle
- Mo le sili ona lelei viewe fautuaina e va'ai i foliga atoa o le mata'itu, ona fetu'una'i lea o le tulimanu o le mata'itu i lou lava mana'o.
- Uu le tulaga ina ia e le togiina le mata'itu pe a e suia le tulimanu o le mata'itū.
E mafai ona e fetu'una'i le mata'itū e pei ona ta'ua i lalo:
Fetuunaiga Viewi le Angle
- Mo le sili ona lelei viewe fautuaina e va'ai i foliga atoa o le mata'itu, ona fetu'una'i lea o le tulimanu o le mata'itu i lou lava mana'o.
- Uu le tulaga ina ia e le togiina le mata'itu pe a e suia le tulimanu o le mata'itū.
E mafai ona e fetu'una'i le mata'itū e pei ona ta'ua i lalo: 
FAAMANATU:
Aua le pa'i i le mata LCD pe a e suia le tulimanu. E ono fa'aleagaina pe malepe ai le lau LCD.
Lapataiga
- Ina ia aloese mai le faaleagaina o lau mata, e pei o le pa'u o le laulau, ia mautinoa e le sū i lalo le mata i le sili atu i le -5 tikeri.
- Aua le oomi le lau a'o fetu'una'i le tulimanu o le mata'itū. Uu na'o le bezel.
Feso'ota'i le Mataitu
Feso'ota'iga Uaea I tua ole Mata'itu ma le Komepiuta: 
- HDMI
- FA-SUB
- Malosiaga
Feso'ota'i ile PC
- Fa'afeso'ota'i fa'amautu le eletise i tua o le fa'aaliga.
- Tape lau komepiuta ma tatala lana uaea eletise.
- Fa'afeso'ota'i le uaea fa'aaliga fa'aali i le feso'ota'iga vitiō i tua o lau komepiuta.
- Fa'afeso'ota'i le uaea eletise o lau komepiuta ma le fa'afeso'ota'i eletise o lau fa'aaliga i totonu o so'o lata ane.
- Ki lau komepiuta ma fa'aali.
Afai e fa'aalia e lau mata'itū se ata, ua mae'a fa'apipi'i. Afai e le fa'aalia se ata, fa'amolemole va'ai Fa'afitauli. Ina ia puipuia meafaigaluega, tape i taimi uma le PC ma le LCD mataitu ae le'i fa'afeso'ota'i.
Fetuunaiga
Hotkeys 
| 1 | SouuilaTa'avale/Ofo |
| 2 | Va'aiga manino/ |
| 3 | Fa'atusa ata/> |
| 4 | Menu/Ulufale |
| 5 | Malosiaga |
Menu/Ulufale
Oomi e fa'aali le OSD pe fa'amaonia le filifiliga.
Malosiaga
Oomi le faamau Malosi e ki ai le mata'itū.
Fa'atusa ata/>
When the OSD menu is turned off, press the “>” key to enter the image scale switching function, and press the “<” or “>” key to switch between 4:3 or widescreen modes. If the input resolution of the product is widescreen mode, the “Image Ratio” item in the OSD cannot be adjusted.
Puna/Auto/Alu
- Pe a tape le lisi o le OSD, pe afai o le mea e tuʻuina atu o se faʻailoga D-SUB, o loʻo taofi i lalo lenei ki mo le tusa ma le 2 sekone o le a ulufale atu i le galuega fetuutuunai otometi. O le galuega fetuutuunai otometi o le a otometi lava ona seti le tulaga faalava, tulaga tūsaʻo, uati, ma le vaega.
- A tape le lisi o le OSD, oomi le ki e fa'agaoioi ai le fa'agasologa o le fa'ailoga puna. Fa'aauau pea ona oomi lenei ki e filifili ai le puna fa'ailoga o lo'o fa'aalia i le fa'amatalaga fa'amatalaga, ma oomi le ki o le lisi e fetuutuunai e filifili ai le puna fa'ailoga.
- A fa'agaoioi le lisi o le OSD, o le ki lea e alu i fafo (e alu ese mai le lisi o le OSD).
Va'aiga manino/
- When the OSD is not displayed, press the”<” button to activate Clear Vision. one
- Use the”<” or”>” button to select settings such as weak, medium, strong, or off. The default setting is always’ off’
- Press and hold the “<” button for 5 seconds to activate the Clear Vision demo, and the message “Clear Vision Demo: on” will appear on the screen. Press the menu or exit button, and the message will disappear. Press and hold the ‘ <‘ button again for 5 seconds to close the Clear Vision demonstration.(Clear Vision demo: On) Five seconds.
O le galuega a le Clear Vision e mafai ona fa'aliliuina ata faanenefu maualalo i ni ata manino ma manino, e maua ai le ata sili ona lelei viewle poto masani.
| Vaaiga manino | vaivai | Fetuuna'i Va'aiga manino. |
| Alafua | ||
| Malosi | ||
| Tape | ||
| Fa'aaliga manino Va'aiga | Fa'agata po'o Fa'amalo | Fa'agata pe fa'agaoioi fa'ata'ita'iga |
05D Fa'atulagaina
Fa'atonuga fa'avae ma faigofie ile ki fa'atonu. 
- Oomi le
MENU-fa'amau e fa'agaoioi ai le faamalama OSD. - Press< Left or> Right to navigate through the functions. Once the desired function is highlighted, press the MENU-button to activate it, press< Left or> Right to navigate through the sub-menu functions. Once the desired function is highlighted, pressMENU-fa'amau e fa'agaoioia ai.
- Press < Left or> to change the settings of the selected function. Press
e alu ese. Afai e te manaʻo e faʻafetaui soʻo se isi
function, repeat steps 2-3. - Galuega Loka OSD: Ina ia loka le OSD, oomi ma uu leMENU-faamau a'o pe le mata'itusi ona oomi lea
fa'amau mana e ki ai le mata'itū. Ina ia tatala le OSD – fetaomi ma uu le MENU-faamau a'o pe le mata'itusi ona oomi lea fa'amau mana e ki ai le mata'itū.
Fa'amatalaga:
- Afai o le oloa e na'o le tasi le mea e fa'aoga ai, o le mea o le "Filifili Filifilia" e le mafai ona fetuunai.
- Afai o le fa'ai'uga o fa'ailo fa'aulu o oloa o le fa'ai'uga fa'apitonu'u, e le aoga le mea o le "Image Ratio".
- ECO modes (sei vagana ai Standard mode), DCR, DCB mode ma Picture Boost, mo nei setete e fa e na o le tasi le setete e mafai ona iai.
Luminance
Fa'aaliga:
When “HDR Mode” is set to “non-off’, the items “Contrast”, “Eco Mode”, “Gamma” cannot be adjusted.
Seti ata 
 |
loka | 0-100 | Fetuuna'i le uati ata e fa'aitiitia ai le pisa o laina tu'usa'o | |
| Vaega | 0-100 | Fetuuna'i le vaega o ata e faaitiitia ai le pisapisao laina faalava | ||
| Ma'ai | 0-100 | Fetuuna'i le ma'ai o le ata. | ||
| H. Tulaga | 0-100 | Fetuuna'i le tulaga faalava o le ata | ||
| V. Tulaga | 0-100 | Fetuunai le tulaga tuusao o le ata. |
Seti Lanu 
 |
Lanu Temp. | Mafanafana | Fualili Lanu mafanafana | |
| masani | Fua o le lanu masani | |||
| Sekia | Maliu Lanu Temperature | |||
| Tagata fa'aoga | Lanu Tevela | |||
| Gamut lanu | Panel Native | Panel standard color space. | ||
| sRGB | sRGB | |||
| Faiga lanumoana maualalo | Tape | Reduce the proportion of blue light by controlling the color temperature. | ||
| Telemedia Initaneti | ||||
| Ofisa | ||||
| Faitauga | ||||
| Lanu mumu | 0-100 | O tupe maua mumu mai Numera-resitala | ||
| Lanu meamata | 0-100 | Meamata lanu meamata mai Numera-resitala | ||
| Lanu moaga | 0-100 | Blue tupe maua mai Digital-resitala | ||
| Faiga DCB | Tape | Ta'e le DCB Mode. | ||
| Faaleleia atoa | Fa'aagaoi le Fa'asili Fa'asili. | |||
| Natura Pa'u | Fa'agaoioi le Natura Pa'u Faiga. | |||
| Fanua Green | Fa'aagaoioi le Fa'aa'oa'iga Fa'ameamata. | |||
| Lanumoana-lanumoana | Fa'aagaoioi le Sky-blue Mode. | |||
| Faʻailoa Ala | Fa'agaoioi le AutoDetect Mode. | |||
| DCB Fa'aaliga | Ki/Peti | Fa'agata po'o Fa'agaoioi le Fa'aaliga. | ||
Fa'aaliga:
- Pe a seti le "HDR Mode" poʻo le "HDR" i lalo o le "Brightness" i le le tape, o mea uma o loʻo i lalo o le "Luleu Seti" e le mafai ona fetuunai.
- A seti le Seti Lanu i le sRGB, o isi mea uma i lalo o le Color Gamut e le mafai ona fetuunai.
Fa'ateleina Ata 
 |
Fa'avaa Malamalama | I luga pe tape | Fa'agata pe fa'aaga le Fa'avaa Malamalama. |
| Tele Fa'avaa | 14-100 | Fetuuna'i le Tele o le Fa'avaa. | |
| Malamalama | 0-100 | Fetuuna'i le pupula o le Fa'avaa. | |
| Fa'atusatusaga | 0-100 | Fetuuna'i Fa'atusa Fa'avaa. | |
| H. tulaga | 0-100 | Fetuuna'i le Tulaga faalava. | |
| V. tulaga | 0-100 | Fetuuna'i Tulaga Tu'usa'o Fa'avaa. |
Manatua:
- Fetuuna'i le pupula, fa'atusatusaga, ma le tulaga o le Fa'avaa Malamalama mo le lelei viewle poto masani.
- When “HOR Mode” or “HOR” under “Luminance” is set to “non-off’, all items under “Picture Boost” cannot be adjusted.
Seti OSD 
 |
Gagana | Filifili le gagana OSD. | |
| Uma le taimi | 5-120 | Fetuuna'i le Taimi OSD. | |
| H. Tulaga | 0-100 | Fetuuna'i le tulaga faalava o le OSD. | |
| V. Tulaga | 0-100 | Fetuuna'i le tulaga tūtū o le OSD. | |
| Volume | 0-100 | Fetuunaiga o le Volume. | |
| Malamalama | 0-100 | Fetuuna'i le manino o le OSD. | |
| Fetalai Faamanatu | I luga pe tape | Ta'e le faamanatu pe afai e galue pea le tagata fa'aoga mo nisi mea nai lo le 1 itula. | |
Ta'aloga Fa'atulagaina 
 |
Faiga Taaloga | Tape | Leai faʻalelei e le ata ata atamai |
| FPS |
|
||
| RTS | Mo taʻalo RTS (Real Time Strategy). Faʻaleleia le tulaga lelei o ata. | ||
| Tu'uga | Mo ta'aloga ta'aloga ta'aloga, Tuuina atu le taimi sili ona vave tali ma le maualuga o le tasiration lanu. | ||
| Taaalo 1 | Fa'atonuga a le tagata fa'aoga na fa'asaoina e avea ma Gamer 1. | ||
| Taaalo 2 | Fa'atonuga a le tagata fa'aoga na fa'asaoina e avea ma Gamer 2. | ||
| Taaalo 3 | Fa'atonuga a le tagata fa'aoga na fa'asaoina e avea ma Gamer 3. | ||
| Pulea Ataata | 0-100 | Shadow Control Default is 50, then end-user can adjust from 50 to 100 or O to increase contrast for clear picture.
|
|
| Adaptive-Sync | Ki/Peti | Turn off or on the Adaptive Sync feature. Adaptive Sync running reminder: When the Adaptive Sync feature is enabled, there may be flickering in certain gaming environments, | |
| Lanu Ta'aloga | 0-20 | Taaloga Lanu e maua ai le 0-20 tulaga mo le fetuunaiga o le saturation e maua ai se ata sili atu. | |
| Ova le ta'avale | Tape | Adjust response time .If the user sets Over Drive to a “strong” level, it may display blurry images. Users can adjust the Overdrive level or turn it off according to their preferences.
Fa'aaliga:
|
|
| vaivai | |||
| Alafua | |||
| Malosi | |||
| Fa'aola | |||
| MBR | 0 – 20 | MBR (motion blur reduction) provides 0-20 levels of adjustment to reduce motion blur
Fa'aaliga:
|
|
| Faʻafanua Faʻafanua | TapeI Right-Up/ Right-Down / Left-Down/ Left-Up | Instantly display the vertical frequency of the current signal | |
| Fa'ailoga Telefoni | Ki/Peti | Ki pe tape le ta'aloga kolosi |
Fa'aaliga:
When “HOR Mode” under “Luminance” is set to “non-off’, the items “Game Mode”, “Shadow Control”, “Game Color”, cannot be adjusted.
Fa'aopoopo 
|
|
Filifili Filifili | Auto/D-SUB/HDMI | Filifili le Puna Fa'ailoga Fa'aofi. |
| Taimi Taimi | 0-24 itula | Filifili le DC tape taimi. | |
| Fa'atusa ata | Lautele/ 4:3 | Choose widescreen or 4:3 display format. | |
| DOC/Cl | Ioe pe Leai | Turn ON/OFF DOC/Cl Support. | |
| Toe setiina | Ioe pe Leai | Toe seti le lisi i le pasi. |
Alu 
Tuʻua le OSD autu
Fa'ailoga LED
| Tulaga | Lanu LED |
| Faiga Malosiaga atoa | Lanu pa'epa'e |
| Faiga fa'agaoioi | Lanu moli |
Fa'amatalaga
Fa'amatalaga Lautele
| I Model Name
Avetaavale System Viewmafaia Ata Tele Panela Pixel Pitch Vitio I Separate Sync. |
I22B15H2
TFT Color LCD 54.5cm diagonal 0.2493mm(H) x 0.241mm(V) Fa'aoga HDMI & R,G,B IHNTTL |
|||||
| Fa'aali Lanu | I16.?M | |||||
| Va'aiga Fa'asaga'i | 30k-85kHz (D-SUB)
30k-115kHz (HDMI) |
|||||
| Tele fa'asaga i luga ole lapo'a | 478.656mm | |||||
|
Va'aiga Va'aiga Tu'usa'o |
48-75Hz (D-SUB)
48-100Hz (HDMI) |
|||||
| O isi | ||||||
| Tele Fa'ata Sa'o | 1260.28mm | |||||
|
Fa'atonu Fa'atonu sili |
1920×1080@75Hz(D-SUB)
1920×1080@100Hz(HDMI) |
|||||
| Max Filifiliga | 1920×1080@75Hz(D-SUB) *
1920×1080@100Hz(HDMI) |
|||||
| Polokalama & Ta'alo | VESA DDC2B / CI | |||||
| Punavai Malosi | R/G/B / HDMI | |||||
| Fa'aaogāga Malosiaga | 12V =2.0A | |||||
| I Typical(default brightness and contrast) I20.sw | ||||||
| Feso'ota'i | Max. (malamalama = 100, fa'atusatusa =100) | 1:5 22.5W | ||||
| Faiga tūtū | 1:5 0.3W | |||||
| Fa'aletino | Ituaiga Feso'ota'i | D-Sub/HDMI | ||||
| Characteristics I Signal Cable Type | I Detachable | |||||
|
Si'osi'omaga |
vevela | Fa'agaioiga | 0°c- 40°c | |||
| Le fa'agaioiina | -25°C-55°C | |||||
| Susū | Fa'agaioiga | 10% - 85% (e le fa'afefe) | ||||
| Le fa'agaioiina | 5% - 93% (e le fa'afefe) | |||||
| Maualuluga | Fa'agaioiga | Om- 5000 m (Oft- 16404ft ) | ||||
| Le fa'agaioiina | Om- 12192m (Oft- 40000ft) | |||||
*: Ona o faʻafitauli fesoʻotaʻiga ma nisi kata faʻataʻitaʻiga, pe a faʻapipiʻi le faailo D-SUB, pe a fai o le iugafono 1920 × 1080@75Hz Afai e iai ni mea sese, faʻamolemole fetuunai le fua faʻafouina i le 60Hz.
Fa'atonu Fa'aaliga Fa'aaliga
LAFOGA
According to VESA standard, different operating systems and graphics cards may have a certain error (+/-1 HZ) when calculating refresh rate (field frequency), the specific refresh rate (field frequency) please refer to.The object shall prevail.
Pin Tofiga 
| Pin Nu | Igoa Faailoga | Pin Nu | Igoa Faailoga | Pin Nu | Igoa Faailoga |
| 1. | TMDS Faʻamatalaga 2+ | 9. | TMDS Faʻamatalaga 0- | 17. | DDC / CEC Eleele |
| 2. | TMDS Faʻamatalaga 2 Talita | 10. | Uati TMDS + | 18. | + 5V Malosiaga |
| 3. | TMDS Faʻamatalaga 2- | 11. | TMDS Uati Talita | 19. | Mauaina vevela plug |
| 4. | TMDS Faʻamatalaga 1+ | 12. | TMDS Uati- | ||
| 5. | TMDS Faʻamaumauga 1Shield | 13. | CEC | ||
| 6. | TMDS Faʻamatalaga 1- | 14. | Fa'asao (NC ile masini) | ||
| 7. | TMDS Faʻamatalaga 0+ | 15. | SCL | ||
| 8. | TMDS Faʻamatalaga 0 Talita | 16. | SDA |
20-Pin Valivali Faʻaalia Faʻailoga uaea
| Pin Nu | Igoa Faailoga | Pin Nu | Igoa Faailoga |
| ML_Lane 3 (n) | 11 | GND | |
| 2 | GND | 12 | ML_Lane 0 (i) |
| 3 | ML_Lane 3 (i) | 13 | CONFIG1 |
| 4 | ML_Lane 2 (n) | 14 | CONFIG2 |
| 5 | GND | 15 | AUX_CH (p) |
| 6 | ML_Lane 2 (i) | 16 | GND |
| 7 | ML_Lane 1 (n) | 17 | AUX_CH (n) |
| 8 | GND | 18 | Mauaina vevela plug |
| 9 | ML_Lane 1 (i) | 19 | Toe fo'i DP_PWR |
| 10 | ML_Lane 0 (n) | 20 | DP_PWR |
Polokalama ma Ta'alo
Fa'apipi'i ma Ta'alo le DDC2B
- O lenei mata'itū ua fa'apipi'iina i VESA DDC2B gafatia e tusa ai ma le VESA DDC STANDARD. E mafai ai e le mataʻituina ona logoina le polokalama talimalo o lona faʻamatalaga ma, faʻalagolago i le maualuga o le DDC faʻaaogaina, faʻafesoʻotaʻi faʻamatalaga faaopoopo e uiga i ona faʻaaliga gafatia.
- The DDC2B is a bi-directional data channel based on the 12C protocol. The host can request EDID information over the DDC2B channel.
Fa'amatalaga o le puletaofia
Maualuga-FAAMATALAGA MULTIMEDIA INTERFACE
- HDMI, HDMI High-Definition Multimedia Interface and other terms, HDMI trade appearance and HDMI labels are all HDMI Licensing Administrator, Inc.is a trademark or registered trademark.
- O isi fa'ailoga, igoa o oloa, igoa o auaunaga ma igoa o kamupani o lo'o fa'aalia i lenei fa'amatalaga ma oloa o lo'o fa'amatalaina i lenei fa'amatalaga o meatotino a latou tagata.
Fa'afitauli
| Fa'afitauli & Fesili | Fofo e ono mafai |
| E Le'o KOLA le LED Malosi | Ia mautinoa o lo'o ON le ki o le eletise ma o lo'o feso'ota'i lelei le Uaea Malosi i se so'o eletise fa'alelalo ma le mata'itū. |
| Leai ni ata i luga ole lau |
|
| O le Ata e lefu ma e iai le fa'afitauli o le Ata |
|
| Fa'aa'e Ata, Emo Po'o Mamanu Galu e Fa'aalia I le Ata |
|
| Monitor Is Stuck In Active Off Mode” |
|
| O lo'o misi se tasi o lanu muamua (MULAU, MULAU, PO'O LE MULI) | Asia'i le uaea vitiō o le mata'itū ma ia mautinoa e leai se pine e fa'aleagaina. Ia mautinoa o loʻo fesoʻotaʻi lelei le uaea vitiō a le mataʻitu i le komepiuta. |
| E le fa'atotonugatotonu po'o le lapopo'a lelei le ata o le lau | Fetuuna'i le Tulaga-H ma le Tulaga V po'o le fetaomi i le ki vevela (AUTO). |
| O le ata e iai ni faaletonu lanu (pa'epa'e e le pa'epa'e) | Fetuuna'i le lanu RGB pe filifili le vevela lanu e mana'omia. |
| Fa'alavelave fa'asaga i luga o le lau | Fa'aoga le Windows 7/8/10 tapuni tapuni e fetuutuunai ai le UTI ma le TAUMATUGA. Oomi e otometi ona fetuutuunai. |
| Tulafono Faatonutonu & Auaunaga | Fa'amolemole va'ai i Tulafono Fa'atonu & Auaunaga Fa'amatalaga o lo'o i totonu o le CD manual po'o www.aoc.com (e su'e le fa'ata'ita'iga e te fa'atauina i lou atunu'u ma su'e Fa'atonuga & Auaunaga Fa'amatalaga ile itulau Lagolago. |
Pepa / Punaoa
 |
AOC 22B15H2 LCD Mataitu [pdf] Tusi Taiala 22B15H2, 22B15H2 LCD Monitor, 22B15H2, LCD Monitor, Monitor |