AOC 22B15H2 LCD Monitor Manual

Bayanan kula, Gargaɗi, da Gargaɗi
A cikin wannan jagorar, tubalan rubutu na iya kasancewa tare da gunki kuma a buga shi da nau'in m ko cikin nau'in rubutun. Waɗannan tubalan bayanin kula ne, gargaɗi, da gargaɗi, kuma ana amfani da su kamar haka:

NOTE: NOTE yana nuna mahimman bayanai waɗanda ke taimaka maka yin amfani da tsarin kwamfutarka da kyau.

HANKALI: Tsanaki yana nuna yiwuwar lalacewar hardware ko asarar bayanai kuma yana gaya muku yadda zaku guje wa matsalar.
GARGADI: WARNING yana nuna yuwuwar cutar da jiki kuma yana gaya muku yadda zaku guje wa matsalar. Wasu gargaɗin na iya bayyana a madadin tsari kuma ƙila ba su tare da gunki. A irin waɗannan lokuta, ƙayyadaddun gabatar da gargaɗin yana da izini ta hanyar hukuma.

Ƙarfi

Ya kamata a yi aiki da mai saka idanu kawai daga nau'in tushen wutar lantarki da aka nuna akan lakabin. Idan ba ku da tabbacin nau'in wutar lantarki da ake bayarwa ga gidanku, tuntuɓi dillalin ku ko kamfanin wutar lantarki na gida.

Ana sanye da na'urar saka idanu tare da filogi mai tushe mai fuska uku, filogi mai fini na uku (ƙasa). Wannan filogi zai dace ne kawai a cikin madaidaicin wutar lantarki azaman fasalin aminci. Idan hanyar sadarwar ku ba ta ɗauki filogin waya uku ba, sa ma'aikacin wutar lantarki ya shigar da madaidaicin wurin, ko amfani da adaftan don ƙasa na'urar lafiya. Kar a kayar da manufar aminci na filogi mai tushe.
Cire na'urar yayin guguwar walƙiya ko lokacin da ba za a yi amfani da shi na dogon lokaci ba. Wannan zai kare na'urar duba daga lalacewa saboda hauhawar wutar lantarki.

Kar a yi lodin igiyoyin wuta da igiyoyin tsawo. Yin lodin abu zai iya haifar da gobara ko girgiza wutar lantarki.
Don tabbatar da aiki mai gamsarwa, yi amfani da na'urar saka idanu kawai tare da kwamfutoci da aka jera UL waɗanda ke da madaidaitan madaidaitan ma'auni masu alama tsakanin 100-240V AC, Min. 5A.

The wall socket shall be installed near the equipment and shall be easily accessible. A For use only with included power adapter:
- Mai ƙira: Shenzhen Suoyuan Technology Co., Ltd.
- Samfura: SOY-1200200EU-539

Shigarwa

Kada ka sanya na'urar a kan keken mara tsayayye, tsayawa, tawul, sashi, ko teburi. Idan mai saka idanu ya faɗi, zai iya cutar da mutum kuma ya haifar da mummunar lalacewa ga wannan samfurin. Yi amfani da keken keke, tsayawa, tafkuna, madaidaici, ko tebur wanda masana'anta suka ba da shawarar ko aka sayar da wannan samfur. Bi umarnin masana'anta lokacin shigar da samfurin kuma yi amfani da na'urorin haɗi waɗanda masana'anta suka ba da shawarar. Ya kamata a motsa haɗin samfur da cart tare da kulawa.

Kada a taɓa tura kowane abu zuwa cikin ramin kan ma'aunin saka idanu. Yana iya lalata sassan da'ira da ke haifar da gobara ko girgiza wutar lantarki. Kada a taɓa zubar ruwa a kan duba.
Kada a sanya gaban samfurin a ƙasa.

Idan ka dora na'urar a kan bango ko shiryayye, yi amfani da kayan hawan da masana'anta suka amince da shi kuma bi umarnin kit.
Bar wasu sarari a kusa da mai duba kamar yadda aka nuna a ƙasa. In ba haka ba, zazzagewar iska na iya zama rashin isasshe don haka zafi fiye da kima na iya haifar da gobara ko lalata na'urar duba.

Don gujewa yuwuwar lalacewa, ga misaliampidan panel ɗin yana barewa daga bezel, tabbatar da cewa mai duba baya karkata ƙasa da fiye da digiri -5. Idan madaidaicin kusurwa -5 digiri na ƙasa ya wuce, lalacewar na'urar ba za a rufe ƙarƙashin garanti ba.
Duba ƙasa da shawarwarin wuraren samun iska a kusa da mai saka idanu lokacin da aka shigar da na'urar a bango ko a tsaye:

An shigar dashi tare da tsayawa

Tsaftacewa

Tsaftace majalisa akai-akai da zane. Kuna iya amfani da abu mai laushi don shafe tabon, maimakon mai ƙarfi-dotergent wanda zai kula da majalisar samfurin.
Lokacin tsaftacewa, tabbatar da cewa ba a zubar da wanki a cikin samfurin ba. Tufafin tsaftacewa bai kamata ya zama mai tauri ba saboda zai tarar da fuskar allo.

Da fatan za a cire haɗin wutar lantarki kafin tsaftace samfurin.

Sauran

Idan samfurin yana fitar da wani bakon kamshi, sauti ko hayaki, cire haɗin wutar lantarki NAN TAKE kuma tuntuɓi Cibiyar Sabis.
Tabbatar cewa ba'a toshe wuraren buɗewar da tebur ko labule.
Kada a sa na'urar duba LCD a cikin tsananin girgiza ko yanayin tasiri yayin aiki.
Kar a ƙwanƙwasa ko sauke na'urar duba yayin aiki ko sufuri.

Saita

Abubuwan da ke cikin Akwati

*Ba duk kebul na sigina ba ne za a samar da shi ga duk ƙasashe da yankuna. Da fatan za a bincika tare da dila na gida ko ofishin reshe na AOC don tabbatarwa.

Saita Tsaya & Tushe
Da fatan za a saita ko cire tushe ta bin matakan kamar ƙasa.

Saita:

Cire:

Daidaitawa Viewcikin Angle

Don mafi kyau duka viewAna ba da shawarar duba cikakkiyar fuskar mai duba, sannan daidaita kusurwar mai duba zuwa naka zaɓi.
Rike tsayawar don kada ku kifar da mai duba lokacin da kuka canza kusurwar mai duba.

Kuna iya daidaita mai duba kamar a ƙasa:

Daidaitawa Viewcikin Angle

Don mafi kyau duka viewAna ba da shawarar duba cikakkiyar fuskar mai duba, sannan daidaita kusurwar mai duba zuwa naka zaɓi.
Rike tsayawar don kada ku kifar da mai duba lokacin da kuka canza kusurwar mai duba.

Kuna iya daidaita mai duba kamar a ƙasa:

NOTE:
Kada ku taɓa allon LCD lokacin da kuke canza kusurwa. Yana iya haifar da lalacewa ko karya allon LCD.

Gargadi

Don guje wa yuwuwar lalacewar allo, kamar bawon panel, tabbatar da cewa mai duba baya karkata ƙasa da fiye da digiri -5.

Kar a danna allon yayin daidaita kusurwar mai duba. Riƙe bezel kawai.

Haɗa Monitor

Haɗin Kebul A Bayan Kula da Kwamfuta:

HDMI

D-SUB
Ƙarfi

Haɗa zuwa PC

Haɗa adaftar wutar lantarki zuwa bayan nuni da ƙarfi.
Kashe kwamfutarka kuma cire igiyoyin wutar lantarki.
Haɗa kebul ɗin siginar nuni zuwa mai haɗin bidiyo a bayan kwamfutarka.

Toshe igiyar wutar lantarki na kwamfutarka da adaftar wutar nunin ka cikin wata hanyar da ke kusa.
Kunna kwamfutarka kuma nunawa.

Idan duban ku ya nuna hoto, shigarwa ya cika. Idan baya nuna hoto, da fatan za a duba Shirya matsala. Don kare kayan aiki, koyaushe kashe PC da LCD duba kafin haɗawa.

Daidaitawa

Hotkeys

1	SoudunduFita ta atomatik
2	Bayyana hangen nesa /
3	Girman Hoto/>
4	Menu/Shiga
5	Ƙarfi

Menu/Shiga
Latsa don nuna OSD ko tabbatar da zaɓin.

Ƙarfi
Danna maɓallin wuta don kunna mai duba.

Girman hoto/>
When the OSD menu is turned off, press the “>” key to enter the image scale switching function, and press the “<” or “>” key to switch between 4:3 or widescreen modes. If the input resolution of the product is widescreen mode, the “Image Ratio” item in the OSD cannot be adjusted.

Source/Auto/Fita

Lokacin da aka kashe menu na OSD, idan shigarwar tushen siginar D-SUB ce, riƙe wannan maɓallin na kusan daƙiƙa 2 zai shigar da aikin daidaitawa ta atomatik. Aikin daidaitawa ta atomatik zai saita matsayi a kwance, matsayi na tsaye, agogo, da lokaci ta atomatik.

Lokacin da aka kashe menu na OSD, danna wannan maɓallin don kunna aikin sauya tushen siginar. Ci gaba da danna wannan maɓallin don zaɓar tushen siginar da aka nuna a sandar bayanai, kuma danna maɓallin menu don daidaitawa don zaɓar tushen siginar.
Lokacin da menu na OSD ke aiki, wannan maɓallin yana aiki azaman maɓallin fita (don fita menu na OSD).

Bayyana hangen nesa /

When the OSD is not displayed, press the”<” button to activate Clear Vision. one
Use the”<” or”>” button to select settings such as weak, medium, strong, or off. The default setting is always’ off’
Press and hold the “<” button for 5 seconds to activate the Clear Vision demo, and the message “Clear Vision Demo: on” will appear on the screen. Press the menu or exit button, and the message will disappear. Press and hold the ‘ <‘ button again for 5 seconds to close the Clear Vision demonstration.(Clear Vision demo: On) Five seconds.

Ayyukan Bayyanar hangen nesa na iya canza ƙananan hotuna masu ɓarkewar ƙuduri zuwa bayyanannun hotuna masu haske, samar da mafi kyawun hoto viewgwaninta.

Bayyana hangen nesa	Mai rauni	Daidaita Bayyanar hangen nesa.
	Matsakaici
	Mai ƙarfi
	Kashe
Bayyana hangen nesa ya nuna	A kashe ko Kunna	A kashe ko kunna zanga-zangar

Saitin 05D

Umarni na asali da sauƙi akan maɓallan sarrafawa.

Danna maɓallin Maɓallin MENU don kunna OSD taga.

Press< Left or> Right to navigate through the functions. Once the desired function is highlighted, press the MENU-button to activate it, press< Left or> Right to navigate through the sub-menu functions. Once the desired function is highlighted, pressMaɓallin MENU don kunna shi.
Press < Left or> to change the settings of the selected function. Pressfita. Idan kuna son daidaita wani
function, repeat steps 2-3.
Aikin Kulle OSD: Don kulle OSD, latsa ka riƙeMaɓallin MENU yayin da mai duba ke kashe sannan danna maɓallin wuta don kunna mai duba. Don buɗe OSD - latsa ka riƙe Maɓallin MENU yayin da mai duba ke kashe sannan danna maɓallin wuta don kunna mai duba.

Bayanan kula:

Idan samfurin yana da shigarwar siginar guda ɗaya kawai, abu na "Input Select" yana kashe don daidaitawa.
Idan ƙudurin shigarwar siginar samfur shine ƙudurin gida, abin "Ratio Hoto" ba shi da inganci.

Hanyoyin ECO (sai dai Standard yanayin), yanayin DCR, yanayin DCB da Boost Hoto, na waɗannan jihohi huɗu waɗanda jiha ɗaya kaɗai ke iya wanzuwa.

Hasken haske

Lura:
When “HDR Mode” is set to “non-off’, the items “Contrast”, “Eco Mode”, “Gamma” cannot be adjusted.

Saitin Hoto

kulle	0-100	Daidaita agogon hoton don rage hayaniyar layi ta tsaye
Mataki	0-100	Daidaita yanayin hoton don rage hayaniyar layi a kwance
Kaifi	0-100	Daidaita kaifin hoton.
H. Matsayi	0-100	Daidaita matsayi a kwance na hoton
V. Matsayi	0-100	Daidaita matsayi na tsaye na hoton.

Saita Launi

Zazzabi Launi.	Dumi	Zafin Launi Mai Dumi
	Na al'ada	Yanayin Launi na al'ada
	Sanyi	Sanyi Launi Zazzabi
	Mai amfani	Zazzabi Launi
Launi Gamut	Dan Asalin Panel	Panel standard color space.
	sRGB	sRGB
Ƙarƙashin Yanayin Blue	Kashe	Reduce the proportion of blue light by controlling the color temperature.
	Multimedia Intanet

	Ofishin
	Karatu
Ja	0-100	Jan riba daga Digital-rejista
Kore	0-100	Green riba daga Digital-rejista
Blue	0-100	Blue riba daga Digital-rejista
Yanayin DCB	Kashe	Kashe Yanayin DCB.
	Cigaba	Kunna Cikakken Yanayin Haɓakawa.
	Nature Fata	Kunna Yanayin fata na yanayi.
	Filin Green	Kunna Yanayin Filin Koren.
	Sky-blue	Kunna Yanayin Sky-blue.
	Gano atomatik	Kunna Yanayin AutoDetect.
Demo na DCB	Kunna/Kashe	A kashe ko Kunna Demo.

Lura:

Lokacin da "HDR Mode" ko "HDR" karkashin "Brightness" aka saita zuwa wadanda ba a kashe ba, duk abubuwan da ke ƙarƙashin "Saitunan Launi" ba za a iya daidaita su ba.
Lokacin da aka saita Saitin Launi zuwa sRGB, duk sauran abubuwa ƙarƙashin Launi Gamut ba za a iya daidaita su ba.

Haɓaka Hoto

Firam mai haske	Kunna Ko Kashe	A kashe ko Kunna Firam mai haske.
Girman Firam	14-100	Daidaita Girman Firam.
Haske	0-100	Daidaita Tsarin Haske.
Kwatancen	0-100	Daidaita Ma'auni na Frame.
H. matsayi	0-100	Daidaita Frame a kwance Matsayi.
V. matsayi	0-100	Daidaita Frame Matsayi na tsaye.

Lura:

Daidaita haske, bambanci, da matsayi na Firam ɗin Haske don mafi kyau viewgwaninta.

When “HOR Mode” or “HOR” under “Luminance” is set to “non-off’, all items under “Picture Boost” cannot be adjusted.

OSD Saita

Harshe		Zaɓi harshen OSD.
Lokaci ya ƙare	5-120	Daidaita Lokacin OSD.
H. Matsayi	0-100	Daidaita matsayi na kwance na OSD.
V. Matsayi	0-100	Daidaita matsayi na OSD a tsaye.
Ƙarar	0-100	Daidaita Ƙarar.
Gaskiya	0-100	Daidaita nuna gaskiya na OSD.
Tunatarwa Hutu	Kunna Ko Kashe	Rage tunatarwa idan mai amfani ya ci gaba da aiki don ƙarin fiye 1hrs.

Saitin Wasan

Yanayin Wasan	Kashe	Babu haɓakawa ta hanyar wasan hoto na Smart
	FPS	Don kunna wasannin FPS (Farkon Mutum mai harbi). Yana inganta cikakkun bayanai matakin baƙar fata.
	RTS	Don kunna RTS (Dabarun Lokaci na Gaskiya). Inganta ingancin hoto.
	Racing	Don yin wasannin tsere, Yana ba da lokacin amsa mafi sauri da jikewar launi.
	Gamer 1	An adana saitunan zaɓin mai amfani azaman Gamer 1.
	Gamer 2	An adana saitunan zaɓin mai amfani azaman Gamer 2.
	Gamer 3	An adana saitunan zaɓin mai amfani azaman Gamer 3.
Ikon Inuwa	0-100	Shadow Control Default is 50, then end-user can adjust from 50 to 100 or O to increase contrast for clear picture. Idan hoto yayi duhu sosai don ganin cikakken bayani dalla -dalla, daidaitawa daga 50 zuwa 100 don bayyananniyar hoto. If picture is too white to be saw the detail clearly, adjusting from 50 too for clear picture
Adaptive-Sync	Kunna/Kashe	Turn off or on the Adaptive Sync feature. Adaptive Sync running reminder: When the Adaptive Sync feature is enabled, there may be flickering in certain gaming environments,
Launin Wasan	0-20	Launin Wasan zai samar da matakin 0-20 don daidaita jikewa don samun ingantacciyar hoto.
Overdrive	Kashe	Adjust response time .If the user sets Over Drive to a “strong” level, it may display blurry images. Users can adjust the Overdrive level or turn it off according to their preferences. Lura: The “Boost” function is optional when Adaptive-Sync is turned off, and the refresh rate is <::75Hz. Hasken allo zai ragu lokacin da aikin “Boost” ke kunne.
	Mai rauni
	Matsakaici
	Mai ƙarfi
	Ƙara
MBR	0-20	MBR (motion blur reduction) provides 0-20 levels of adjustment to reduce motion blur Lura: The MBR function can be adjusted when Adaptive-Sync is turned off, and the refresh rate <::75Hz. Hasken allon zai ragu yayin da ƙimar daidaitawa ke ƙaruwa.
Madaidaicin Counter	KasheI Right-Up/ Right-Down / Left-Down/ Left-Up	Instantly display the vertical frequency of the current signal
Kiran Kira	Kunna/Kashe	Kunna ko kashe wasan giciye

Lura:
When “HOR Mode” under “Luminance” is set to “non-off’, the items “Game Mode”, “Shadow Control”, “Game Color”, cannot be adjusted.

Ƙari

Input Zabi	Auto/D-SUB/HDMI	Zaɓi Tushen Siginar shigarwa.
Kashe Timer	0hrs	Zaɓi lokacin kashe DC.
Girman Hoto	Fadi/ 4:3	Choose widescreen or 4:3 display format.
DOC/Cl	Ee ko A'a	Turn ON/OFF DOC/Cl Support.
Sake saiti	Ee ko A'a	Sake saita menu zuwa tsoho.

Fita

Fita daga babban OSD

Alamar LED

Matsayi	Launi na LED
Cikakken Yanayin Ƙarfi	Fari
Yanayin Kashe Aiki	Lemu

Ƙayyadaddun bayanai

Ƙididdigar Gabaɗaya

I Model Name Tsarin Tuki Viewiya Girman Hoto Panel Pixel Pitch Bidiyo I Separate Sync.		I22B15H2 TFT Color LCD 54.5cm diagonal 0.2493mm(H) x 0.241 mm(V) HDMI Interface & R, G, B IHNTTL
	Nuni Launi	I16.?M
	Rage Scan A kwance		30k-85kHz (D-SUB) 30k-115kHz (HDMI)
	Girman sikanin kwance (Mafi girman)		478.656mm ku
	Matsakaicin Binciken Tsaye		48-75Hz (D-SUB) 48-100Hz (HDMI)
Wasu
	Girman Duban Tsaye (Mafi girman)	1260.28mm ku
	Mafi kyawun Ƙimar Saiti		1920×1080@75Hz(D-SUB) 1920×1080@100Hz(HDMI)
	Maganin Max		1920×1080@75Hz(D-SUB) * 1920×1080@100Hz(HDMI)
	Toshe & Kunna		VESA DDC2B/CI
	Tushen wutar lantarki		R/G/B / HDMI
	Amfanin Wuta		12V = 2.0A
	I Typical(default brightness and contrast) I20.sw
	Mai haɗawa		Max. (haske = 100, bambanci = 100)		1:5 22.5W
			Yanayin jiran aiki		1:5 0.3W
Na zahiri	Nau'in Haɗawa		D-Sub/HDMI
Characteristics I Signal Cable Type		I Detachable
Muhalli	Zazzabi		Aiki	0°c- 40°c
			Mara Aiki	-25°C-55°C
	Danshi		Aiki	10% - 85% (ba mai tauri)
			Mara Aiki	5% - 93% (ba mai tauri)
	Tsayi		Aiki	Om- 5000 m (Oft- 16404ft )
			Mara Aiki	Om- 12192m (Oft- 40000ft)

*: Saboda matsalolin dacewa tare da wasu katunan zane, lokacin shigar da siginar D-SUB, idan ƙudurin 1920 × 1080@75Hz Idan wasu kurakurai sun faru, da fatan za a daidaita ƙimar farfadowa zuwa 60Hz.

Hanyoyin Nuni da Saiti

TABLE

According to VESA standard, different operating systems and graphics cards may have a certain error (+/-1 HZ) when calculating refresh rate (field frequency), the specific refresh rate (field frequency) please refer to.The object shall prevail.

Sanya Ayyuka

Fil A'a	Sunan siginar	Fil A'a	Sunan siginar	Fil A'a	Sunan siginar
1.	Bayanan TMDS 2+	9.	Bayanan TMDS 0-	17.	DDC/CEC Ground
2.	TMDS Data 2 Garkuwa	10.	TMDS Clock +	18.	+ 5V Power
3.	Bayanan TMDS 2-	11.	Garkuwan agogo na TMDS	19.	Gano Toshe mai zafi
4.	Bayanan TMDS 1+	12.	Kwanan TMDS
5.	Bayanan TMDS 1Shield	13.	CEC
6.	Bayanan TMDS 1-	14.	Ajiye (NC akan na'urar)
7.	Bayanan TMDS 0+	15.	SCL
8.	TMDS Data 0 Garkuwa	16.	SDA

20-Cable Signal Cable Signal Cable

Fil A'a	Sunan siginar	Fil A'a	Sunan siginar
	ML_Lane 3 (n)	11	GND
2	GND	12	ML_Lane 0 (p)
3	ML_Lane 3 (p)	13	Sanyawa1
4	ML_Lane 2 (n)	14	Sanyawa2
5	GND	15	AUX_CH (shafi)
6	ML_Lane 2 (p)	16	GND
7	ML_Lane 1 (n)	17	AUX_CH (n)
8	GND	18	Gano Toshe mai zafi
9	ML_Lane 1 (p)	19	Koma DP_PWR
10	ML_Lane 0 (n)	20	DP_PWR

Toshe kuma Kunna

Toshe & Kunna fasalin DDC2B

Wannan saka idanu yana sanye da damar VESA DDC2B bisa ga VESA DDC STANDARD. Yana ba mai saka idanu damar sanar da tsarin runduna ainihin sa kuma, dangane da matakin DDC da aka yi amfani da shi, sadar da ƙarin bayani game da iyawar nuninsa.
The DDC2B is a bi-directional data channel based on the 12C protocol. The host can request EDID information over the DDC2B channel.

Bayanin haƙƙin mallaka
MAGANAR HALITTA MULTIMEDIA

HDMI, HDMI High-Definition Multimedia Interface and other terms, HDMI trade appearance and HDMI labels are all HDMI Licensing Administrator, Inc.is a trademark or registered trademark.
Sauran alamun kasuwanci, sunayen samfur, sunayen sabis da sunayen kamfanoni da ke bayyana a cikin wannan ƙayyadaddun bayanai da samfuran da aka siffanta a cikin wannan ƙayyadaddun kayan mallakar masu su ne.

Shirya matsala

Matsala & Tambaya	Mahimman Magani
Wutar Wuta Ba a Kunnawa	Tabbatar cewa maɓallin wuta yana kunne kuma Igiyar Wutar tana haɗe da kyau zuwa tashar wutar lantarki ta ƙasa da kuma na'urar duba.
Babu hotuna akan allon	Ana haɗa igiyar wutar lantarki daidai? Duba haɗin igiyar wutan lantarki da wutan lantarki. An haɗa kebul daidai? (Haɗa ta amfani da kebul na VGA) Check the VGA cable connection. (Connected using the HDMI cable) Check the HDMI cable connection. (Connected using the DP cable) Check the DP cable connection. * Ba a samun shigarwar VGA/HDMI/DP akan kowane samfurin. Idan wuta tana kunne, sake kunna kwamfutar don ganin allon farko (allon shiga), wanda za'a iya gani. Idan allon farko (allon shiga) ya bayyana, kunna kwamfutar a cikin yanayin da ya dace (yanayin aminci don Windows 7/8/10) sannan canza mitar katin bidiyo. (Duba zuwa Saitin Mafi kyawun Ƙimar) Idan allon farko (allon shiga) bai bayyana ba, tuntuɓi Cibiyar Sabis ko dilan ku. Shin kuna iya ganin "Ba a Tallafin Shigarwa" akan allon? Kuna iya ganin wannan saƙon lokacin da sigina daga katin bidiyo ya wuce iyakar ƙuduri da mitar da mai duba zai iya ɗauka da kyau. Daidaita matsakaicin ƙuduri da mitar da mai duba zai iya ɗauka da kyau. Tabbatar cewa an shigar da Direbobi na AOC.
Hoto Mai Haushi ne & Yana Da Matsalolin Shadowing Fatalwa	Daidaita Ƙarfi da Ƙarfafawa. Danna don daidaitawa ta atomatik. Tabbatar cewa ba kwa amfani da kebul na tsawo ko akwatin canzawa. Muna ba da shawarar toshe na'urar kai tsaye zuwa mai haɗa fitarwar katin bidiyo a baya.
Hoto Bounces, Flickers Ko Tsarin Kalamai Ya Bayyana A Hoton	Matsar da na'urorin lantarki waɗanda ka iya haifar da tsangwama na lantarki har zuwa nesa da mai saka idanu. Yi amfani da matsakaicin ƙimar wartsakewa mai saka idanu zai iya a ƙudurin da kuke amfani da shi.
Monitor Is Stuck In Active Off Mode”	Ya kamata Maɓallin Wutar Kwamfuta ya kasance a wurin ON. Katin Bidiyon Kwamfuta yakamata a sanya shi da kyau a cikin ramin sa. Tabbatar cewa kebul ɗin bidiyo na mai duba yana da alaƙa da kwamfutar yadda ya kamata. Duba kebul na bidiyo na mai duba kuma tabbatar da cewa ba a lanƙwasa fil ba. Tabbatar cewa kwamfutarka tana aiki ta hanyar buga maɓallin CAPS LOCK akan madannai yayin lura da CAPS LOCK LED. LED ya kamata ya kunna ko Kashe bayan buga maɓallin LOCK na CAPS.
Rasa ɗayan manyan launuka (RED, GREEN, ko BLUE)	Duba kebul na bidiyo na mai saka idanu kuma tabbatar da cewa babu fil da ya lalace. Tabbatar cewa kebul ɗin bidiyo na mai duba yana da alaƙa da kwamfutar yadda ya kamata.
Hoton allo baya tsakiya ko girmansa yadda ya kamata	Daidaita H-Position da V-Position ko latsa hot-key (AUTO).
Hoton yana da lahani masu launi (farin ba ya kama da fari)	Daidaita launi RGB ko zaɓi zafin launi da ake so.
Rikici a kwance ko a tsaye akan allon	Yi amfani da yanayin rufe Windows 7/8/10 don daidaita CLOCK da FOCUS. Danna don daidaitawa ta atomatik.
Ka'ida & Sabis	Da fatan za a koma zuwa Doka & Bayanin Sabis wanda ke cikin littafin CD ko www.aoc.com (don nemo samfurin da kuka saya a cikin ƙasarku kuma don nemo Dokoki & Bayanin Sabis a shafi na Tallafi.

Takardu / Albarkatu

Bayani na AOC22B15H2 [pdf] Manual mai amfani
22B15H2, 22B15H2 LCD Monitor, 22B15H2, LCD Monitor, Monitor

Magana

Manual mai amfani

Bayani na AOC22B15H2

Tsaro