Akwụkwọ ntuziaka onye ọrụ AOC 22B15H2 LCD

ndetu, ịdọ aka ná ntị, na ịdọ aka ná ntị
N'ime akwụkwọ ntuziaka a, enwere ike iji akara ga-eso ngọngọ ederede ma bipụta ya n'ụdị gbara ọchịchịrị ma ọ bụ n'ụdị italic. Ihe mgbochi ndị a bụ ndetu, ịdọ aka ná ntị, na ịdọ aka ná ntị, a na-eji ha dị ka ndị a:

IHE: Ihe ndetu na-egosi ozi dị mkpa na-enyere gị aka iji sistemụ kọmputa gị nke ọma.

kpachara anya: Akpachara anya na-egosi ma enwere ike imebi ngwaike ma ọ bụ enweghị data wee gwa gị otu esi agbanarị nsogbu ahụ.
Ịdọ aka ná ntị: Ịdọ aka ná ntị na-egosi ihe nwere ike imerụ ahụ́ ma na-agwa gị otu esi agbanarị nsogbu ahụ. Ụfọdụ ịdọ aka ná ntị nwere ike ịpụta n'ụdị ọzọ yana akara ngosi agaghị eso ya. N'ọnọdụ ndị dị otú ahụ, ndị ikike nchịkwa nyere iwu ka a kọwapụta ngosi ịdọ aka ná ntị ahụ.

Ike

Ekwesịrị iji ihe nleba anya naanị site n'ụdị isi iyi ike egosiri na label. Ọ bụrụ na ịmaghị n'aka ụdị ọkụ a na-enye n'ụlọ gị, kpọtụrụ onye na-ere gị ma ọ bụ ụlọ ọrụ ọkụ mpaghara.

Ejiri ihe nleba anya nwere plọg nwere ala atọ, plọg nwere pin nke atọ (grounding). Plọg a ga-adaba naanị n'ime oghere ọkụ n'ala dịka ihe nchekwa. Ọ bụrụ na oghere gị anabataghị plọg nwere waya atọ, mee ka onye eletrik rụnye ebe kwesịrị ekwesị, ma ọ bụ jiri ihe nkwụnye gbatuo ngwa ahụ n'enweghị nsogbu. Emebila ebumnuche nchekwa nke plọg etinyere n'ala.
Kwupu ngwa ahụ n'oge oke mmiri ozuzo ma ọ bụ mgbe agaghị eji ya ogologo oge. Nke a ga-echebe onye nleba anya site na mmebi n'ihi oke ọkụ.

Ebubigala eriri ike na eriri ndọtị. Ibubiga ibu nwere ike ibute ọkụ ma ọ bụ ujo eletrik.
Iji hụ na arụ ọrụ na-eju afọ, jiri ihe nleba anya naanị na kọmpụta UL edepụtara nke nwere ebe nchekwa ahaziri kwesịrị ekwesị nke akara n'etiti 100-240V AC, Min. 5A.

The wall socket shall be installed near the equipment and shall be easily accessible. A For use only with included power adapter:
- Onye nrụpụta: Shenzhen Suoyuan Technology Co., Ltd.
- Ụdị: SOY-1200200EU-539

Nwụnye

Edokwala ihe nleba anya n'ụgbọala na-akwụghị ọtọ, nkwụnye, tripod, bracket, ma ọ bụ tebụl. Ọ bụrụ na ihe nleba anya daa, ọ nwere ike imerụ mmadụ ahụ ma mebie ngwaahịa a nke ukwuu. Jiri naanị ụgbọ ala, nkwụnye, tripod, bracket, ma ọ bụ tebụl nke onye nrụpụta kwadoro ma ọ bụ jiri ngwaahịa a ree ya. Soro ntuziaka onye nrụpụta mgbe ị na-etinye ngwaahịa ahụ ma jiri ngwa mgbakwunye nke onye nrụpụta kwadoro. Ngwakọta ngwaahịa na ụgbọ ibu kwesịrị iji nlezianya kpalie ya.

Atụnyela ihe ọ bụla n'ime oghere dị na kabinet nlekota. Ọ nwere ike imebi akụkụ sekit na-ebute ọkụ ma ọ bụ ujo eletrik. Awụpụla mmiri mmiri na ihe nleba anya.
Edokwala ihu ngwaahịa n'ala.

Ọ bụrụ na ị na-ebunye ihe nleba anya n'ahụ mgbidi ma ọ bụ shelf, jiri ngwa nrụnye nke ndị nrụpụta kwadoro wee soro ntuziaka ngwa.
Hapụ oghere n'akụkụ ihe nleba anya dị ka egosiri n'okpuru. Ma ọ bụghị ya, ikuku ikuku nwere ike ezughị oke ya mere ikpo oke ọkụ nwere ike ime ka ọkụ ma ọ bụ mebie ihe nleba anya.

Iji zere mmebi nwere ike ime, maka exampka panel ahụ na-akpụpụ site na bezel, hụ na onye nleba anya adịghị agbada ala karịa -5 degrees. Ọ bụrụ na -5 ogo agbada n'akuku kacha elu, agaghị ekpuchi mmebi ihe nleba anya n'okpuru akwụkwọ ikike.
Hụ n'okpuru ebe ikuku ikuku akwadoro n'akụkụ ihe nleba anya mgbe etinyere ihe nleba anya na mgbidi ma ọ bụ na nkwụnye:

Ejiri nkwudo arụnyere ya

Nhicha

Jiri akwa na-ehicha kabinet mgbe niile. Ị nwere ike iji ncha dị nro na-ehichapụ ntụpọ ahụ, kama ịcha akwa siri ike nke ga-eme ka kọbọd ngwaahịa dị mma.
Mgbe ị na-ehicha ihe, jide n'aka na ọ nweghị ncha agbaba na ngwaahịa ahụ. Uwe nhicha ahụ ekwesịghị ịdị oke siri ike n'ihi na ọ ga-akpụcha elu ihuenyo.

Biko kwụpụ eriri ọkụ tupu ihicha ngwaahịa.

Ndị ọzọ

Ọ bụrụ na ngwaahịa a na-ebunye isi, ụda ma ọ bụ anwụrụ ọkụ, gbanyụọ nkwụnye ọkụ ozugbo wee kpọtụrụ Ụlọ Ọrụ Ọrụ.
Jide n'aka na okpokoro ma ọ bụ ákwà mgbochi egbochighị oghere ndị na-eku ume.
Ejila ihe nleba anya LCD tinye aka na oke ịma jijiji ma ọ bụ ọnọdụ mmetụta dị elu mgbe ị na-arụ ọrụ.
Kwụsịla ma ọ bụ dobe ihe nleba anya mgbe ị na-arụ ọrụ ma ọ bụ njem.

Melite

Ọdịnaya n'ime Igbe

* Ọ bụghị eriri mgbaàmà niile ka a ga-enye maka obodo na mpaghara niile. Biko lelee onye na-ere ahịa mpaghara ma ọ bụ alaka ụlọ ọrụ AOC maka nkwenye.

Nhazi Nkwụsị & Ntọala
Biko hazie ma ọ bụ wepu ntọala na-eso usoro dị n'okpuru.

Melite:

Wepu:

Na-edozi Viewna n'akuku

Maka kacha mma viewN'ihi na a na-atụ aro ka ilele ihu n'uju nke ihe nleba anya, wee mezie akụkụ ihe nleba anya ka mmasị gị dị.
Jide ihe nkwụnye ka ị ghara ịkwatu ihe nleba anya mgbe ị na-agbanwe akụkụ ihe nleba anya.

Ị nwere ike ịhazigharị ihe nleba anya dị ka n'okpuru:

Na-edozi Viewna n'akuku

Maka kacha mma viewN'ihi na a na-atụ aro ka ilele ihu n'uju nke ihe nleba anya, wee mezie akụkụ ihe nleba anya ka mmasị gị dị.
Jide ihe nkwụnye ka ị ghara ịkwatu ihe nleba anya mgbe ị na-agbanwe akụkụ ihe nleba anya.

Ị nwere ike ịhazigharị ihe nleba anya dị ka n'okpuru:

IHE:
Emetụla ihuenyo LCD aka mgbe ị gbanwere akụkụ. Ọ nwere ike imebi ma ọ bụ mebie ihuenyo LCD.

Ịdọ aka ná ntị

Ka ịzenarị mmebi ihuenyo nwere ike ime, dị ka peeling panel, hụ na ihe nleba anya adịghị agbada ala karịa -5 degrees.

Apịla ihuenyo mgbe ị na-edozi akụkụ nke ihe nleba anya. Jide naanị bezel.

Ijikọ Monitor

Njikọ USB N'azụ Nyocha na Kọmputa:

HDMI

D-SUB
Ike

Jikọọ na PC

Jikọọ nkwụnye ọkụ na azụ ihe ngosi ahụ nke ọma.
Gbanyụọ kọmputa gị wee wepụ eriri ọkụ ya.
Jikọọ eriri mgbama ngosi na njikọ vidiyo dị n'azụ kọmputa gị.

Tinye eriri ike nke kọmputa gị na ihe nkwụnye ọkụ nke ngosi gị n'ime oghere dị nso.
Gbanwuo kọmputa gị wee gosipụta ya.

Ọ bụrụ na nleba anya gị gosipụtara onyonyo, nrụnye ezuola. Ọ bụrụ na ọ gosipụtaghị onyonyo, biko rụtụ aka Nchọpụta nsogbu. Iji chekwaa akụrụngwa, gbanyụọ PC na LCD mgbe niile tupu ijikọ.

Na-edozi

Igwe ọkụ ọkụ

1	Souazụ azụAkpaaka/ Wepụ
2	Kpochapụ ọhụụ/
3	Image Ratio/>
4	NchNhr/Tinye
5	Ike

NchNhr/Tinye
Pịa ka igosi OSD ma ọ bụ kwado nhọrọ.

Ike
Pịa bọtịnụ ike ka ịgbanwuo ihe nleba anya.

Oke onyonyo/>
When the OSD menu is turned off, press the “>” key to enter the image scale switching function, and press the “<” or “>” key to switch between 4:3 or widescreen modes. If the input resolution of the product is widescreen mode, the “Image Ratio” item in the OSD cannot be adjusted.

Isi mmalite/Na-akpaghị aka/ Wepụ

When the OSD menu is turned off, if the input is a D-SUB signal source, holding down this key for about 2 seconds will enter the automatic adjustment function. The automatic adjustment function will automatically set the horizontal position, vertical position, clock, and phase.

When the OSD menu is turned off, press this key to activate the signal source switching function. Continuously press this key to select the signal source displayed in the information bar, and press the menu key to adjust to select the signal source.
When the OSD menu is active, this button serves as the exit key (to exit the OSD menu).

Kpochapụ ọhụụ/

When the OSD is not displayed, press the”<” button to activate Clear Vision. one
Use the”<” or”>” button to select settings such as weak, medium, strong, or off. The default setting is always’ off’
Press and hold the “<” button for 5 seconds to activate the Clear Vision demo, and the message “Clear Vision Demo: on” will appear on the screen. Press the menu or exit button, and the message will disappear. Press and hold the ‘ <‘ button again for 5 seconds to close the Clear Vision demonstration.(Clear Vision demo: On) Five seconds.

Ọrụ Clear Vision nwere ike ịtụgharị onyonyo na-adịghị mma dị ala ka ọ bụrụ onyonyo doro anya na nke doro anya, na-enye onyonyo kacha mma viewahụmahụ.

Kpochapụ ọhụụ	Adịghị ike	Gbanwee ọhụụ doro anya.
	Ọkara
	siri ike
	Gbanyụọ
Clear Vision demonstrate	Disable or Enable	Disable or enable demonstrations

Ntọala 05D

Ntuziaka dị mfe na nke dị mfe na igodo njikwa.

Pịa bọtịnụ MENU iji mee ka windo OSD rụọ ọrụ.

Press< Left or> Right to navigate through the functions. Once the desired function is highlighted, press the MENU-button to activate it, press< Left or> Right to navigate through the sub-menu functions. Once the desired function is highlighted, pressbọtịnụ MENU ka ọ rụọ ọrụ.
Press < Left or> to change the settings of the selected function. Pressịpụ apụ. Ọ bụrụ na ịchọrọ ịgbanwe ihe ọ bụla ọzọ
function, repeat steps 2-3.
Ọrụ Mkpọchi OSD: Ka igbachi OSD, pịa ma jidebọtịnụ MENU ka ihe nleba anya na-apụ wee pịa bọtịnụ ike ka ịgbanwuo ihe nleba anya. Ka ịkpọghee OSD – pịa ma jide bọtịnụ MENU ka ihe nleba anya na-apụ wee pịa bọtịnụ ike ka ịgbanwuo ihe nleba anya.

ndetu:

Ọ bụrụ na ngwaahịa nwere naanị otu ntinye mgbaama, ihe "Ntinye Họrọ" ga-enwe ike imeghari.
Ọ bụrụ na mkpebi mgbama ntinye ngwaahịa bụ mkpebi mpaghara, ihe "Ratio Image" abaghị uru.

Ụdị ECO (ma e wezụga ụdị ọkọlọtọ), DCR, ọnọdụ DCB na Boost Foto, maka anọ ndị a na-ekwu na ọ bụ naanị otu steeti nwere ike ịdị.

Ọkụ ọkụ

Mara:
When “HDR Mode” is set to “non-off’, the items “Contrast”, “Eco Mode”, “Gamma” cannot be adjusted.

Ntọala onyonyo

igbachi	0-100	Adjust the image clock to reduce vertical line noise
Usoro	0-100	Adjust the image phase to reduce horizontal line noise
Ịdị nkọ	0-100	Gbanwee nkọ nke ihe onyonyo a.
H. Ọnọdụ	0-100	Adjust the horizontal position of the image
V. Ọnọdụ	0-100	Adjust the vertical position of the image.

Ntọlite agba

Agba okpomọkụ.	Na-ekpo ọkụ	Okpomọkụ Agba na-ekpo ọkụ
	Nkịtị	Normal Color Temperature
	Jụụ	Okpomọkụ Agba dị jụụ
	Onye ọrụ	Okpomọkụ agba
Agba Gamut	Ụmụ amaala panel	Panel standard color space.
	sRGB	sRGB
Ụdị anụnụ anụnụ dị ala	Gbanyụọ	Reduce the proportion of blue light by controlling the color temperature.
	Multimedia Ịntanetị

	Ụlọ ọrụ
	Ọgụgụ
Uhie	0-100	Uru uhie sitere na Digital-debanye aha
Akwụkwọ ndụ akwụkwọ ndụ	0-100	Green uru sitere na Digital-debanye aha
Acha anụnụ anụnụ	0-100	Uru na-acha anụnụ anụnụ sitere na Digital-debanye aha
Ọnọdụ DCB	Gbanyụọ	Gbanyụọ Ụdị DCB.
	Mmezi zuru oke	Kwado ọnọdụ nkwalite zuru oke.
	Akpụkpọ anụ ahụ	Kwado Ụdị akpụkpọ anụ ahụ.
	Ubi Ahịhịa	Kwado ọnọdụ Ubi Green.
	Eluigwe-acha anụnụ anụnụ	Kwado ọnọdụ igwe-acha anụnụ anụnụ.
	Nchekwa onwe	Kwado ọnọdụ AutoDetect.
Ihe ngosi DCB	Gbanyụọ/ Gbanyụọ	Gbanyụọ ma ọ bụ Kwado ngosi.

Mara:

When “HDR Mode” or “HDR” under “Brightness” is set to non-off, all items under “Color Settings” cannot be adjusted.
Mgbe atọrọ ntọala Agba ka sRGB, ihe ndị ọzọ niile n'okpuru Agba Gamut enweghị ike ịhazi ya.

Nkwalite foto

Frame na-egbuke egbuke	Gbanyụọ ma ọ bụ gbanyụọ	Gbanyụọ ma ọ bụ mee ka Frame na-egbuke egbuke.
Nha etiti	14-100	Gbanwee nha Frame.
Icha ọkụ	0-100	Dezie Frame ihie.
Ntughari	0-100	Dezie Frame Ntugharị.
H. ọnọdụ	0-100	Hazie Frame kehoraizin Ọnọdụ.
V. ọnọdụ	0-100	Dezie Frame onodu kwụ ọtọ.

Rịba ama:

Hazie nchapụta, ọdịiche, na ọnọdụ nke Frame na-egbuke egbuke maka mma viewahụmahụ.

When “HOR Mode” or “HOR” under “Luminance” is set to “non-off’, all items under “Picture Boost” cannot be adjusted.

OSD Mbido

Asụsụ		Họrọ asụsụ OSD.
Nkeji oge	5-120	Gbanwee oge OSD.
H. Ọnọdụ	0-100	Gbanwee ọnọdụ kwụ ọtọ nke OSD.
V. Ọnọdụ	0-100	Gbanwee ọnọdụ kwụ ọtọ nke OSD.
Olu	0-100	Ndozi olu.
nghọta	0-100	Gbanwee nghọta nke OSD.
Ihe ncheta ezumike	Gbanyụọ ma ọ bụ gbanyụọ	Mebie ncheta ma ọ bụrụ na onye ọrụ na-arụ ọrụ maka ihe ndị ọzọ karịa 1hrs.

Ntọala egwuregwu

Ụdị egwuregwu	Gbanyụọ	Enweghị nkwalite site na egwuregwu onyonyo Smart
	FPS	Maka ịkpọ egwuregwu FPS (onye mbụ agbapụ). Na -eme ka nkọwapụta ọkwa ojii gbara ọchịchịrị dị mma.
	RTS	Maka ịkpọ RTS (ezigbo oge atụmatụ). Na -emezi ogo onyonyo.
	Ọsọ	Maka igwu egwuregwu ịgba ọsọ, na-enye oge nzaghachi ngwa ngwa yana saturation agba dị elu.
	Onye egwuregwu 1	echekwara ntọala mmasị onye ọrụ dị ka Gamer 1.
	Onye egwuregwu 2	echekwara ntọala mmasị onye ọrụ dị ka Gamer 2.
	Onye egwuregwu 3	echekwara ntọala mmasị onye ọrụ dị ka Gamer 3.
Njikwa Onyunyo	0-100	Shadow Control Default is 50, then end-user can adjust from 50 to 100 or O to increase contrast for clear picture. Ọ bụrụ na foto gbara ọchịchịrị nke ukwuu ịhụ nkọwa ya nke ọma, na -agbanwe site na 50 ruo 100 maka eserese doro anya. If picture is too white to be saw the detail clearly, adjusting from 50 too for clear picture
Nkwado-mmekọrịta	Gbanyụọ/ Gbanyụọ	Turn off or on the Adaptive Sync feature. Adaptive Sync running reminder: When the Adaptive Sync feature is enabled, there may be flickering in certain gaming environments,
Agba egwuregwu	0-20	Agba egwuregwu ga-enye ọkwa 0-20 maka ịhazigharị saturation iji nweta foto kacha mma.
Ịnyafefefe	Gbanyụọ	Adjust response time .If the user sets Over Drive to a “strong” level, it may display blurry images. Users can adjust the Overdrive level or turn it off according to their preferences. Mara: The “Boost” function is optional when Adaptive-Sync is turned off, and the refresh rate is <::75Hz. Nchapụta ihuenyo ga-ebelata mgbe arụ ọrụ “Boost” agbanwuru.
	Adịghị ike
	Ọkara
	siri ike
	Bulite
MBR	0-20	MBR (motion blur reduction) provides 0-20 levels of adjustment to reduce motion blur Mara: The MBR function can be adjusted when Adaptive-Sync is turned off, and the refresh rate <::75Hz. Ncha nke ihuenyo ga-ebelata ka uru ngbanwe na-abawanye.
Ụkpụrụ Counter	GbanyụọI Right-Up/ Right-Down / Left-Down/ Left-Up	Instantly display the vertical frequency of the current signal
Ịkpọ oku	Gbanyụọ/ Gbanyụọ	Gbanyụọ ma ọ bụ gbanyụọ crosshair egwuregwu

Mara:
When “HOR Mode” under “Luminance” is set to “non-off’, the items “Game Mode”, “Shadow Control”, “Game Color”, cannot be adjusted.

Mgbakwunye

Input Họrọ	Auto/D-SUB/HDMI	Họrọ Isi mmalite mgbamaka ntinye.
Gbanyụọ ngụ oge	0-24h	Họrọ oge nkwụsị DC.
Oke onyonyo	Obosara/ 4:3	Choose widescreen or 4:3 display format.
DOC/Cl	Ee ma ọ bụ mba	Turn ON/OFF DOC/Cl Support.
Tọgharia	Ee ma ọ bụ mba	Tọgharia menu ka ọ bụrụ ndabara.

Ụzọ ọpụpụ

Wepụ isi OSD

Ihe ngosi LED

Ọnọdụ	Agba agba
Ọnọdụ Ike zuru oke	Ọcha
Ụkpụrụ anaghị arụ ọrụ	oroma

Nkọwapụta

Nkọwapụta izugbe

I Model Name Sistemụ ịnya ụgbọ ala ViewNha onyonyo nwere ike Ogwe Pixel Pitch Vidiyo I Separate Sync.		I22B15H2 TFT Color LCD 54.5cm diagonal 0.2493mm(H) x 0.241 mm(V) HDMI Interface & R,G,B IHNTTL
	Agba ngosi	I16.?M
	Ogologo nyocha kwụ ọtọ		30k-85kHz (D-SUB) 30k-115kHz (HDMI)
	Nha nyocha kwụ ọtọ(Kachasị)		478.656mm
	Oke nyocha kwụ ọtọ		48-75Hz (D-SUB) 48-100Hz (HDMI)
Ndị ọzọ
	Nha nyocha kwụ ọtọ(Kachasị)	1260.28mm
	Mkpebi atọrọ kacha mma		1920×1080@75Hz(D-SUB) 1920×1080@100Hz(HDMI)
	Mkpebi Max		1920×1080@75Hz(D-SUB) * 1920×1080@100Hz(HDMI)
	Nkwụnye & Gwuo		VESA DDC2B/CI
	Isi Iyi Ike		R/G/B / HDMI
	Oriri ike		12V = 2.0A
	I Typical(default brightness and contrast) I20.sw
	Njikọ		Oke. (ichapụta = 100, ọdịiche = 100)		1:5 22.5W
			Ụdị njikere		1:5 0.3W
Anụ ahụ	Ụdị njikọ		D-Sub/HDMI
Characteristics I Signal Cable Type		I Detachable
gburugburu ebe obibi	Okpomọkụ		Na-arụ ọrụ	0°c- 40°c
			Na-adịghị arụ ọrụ	-25°C-55°C
	iru mmiri		Na-arụ ọrụ	10% - 85% (na-abụghị condensing)
			Na-adịghị arụ ọrụ	5% - 93% (na-abụghị condensing)
	Elu		Na-arụ ọrụ	Om- 5000 m (Oft- 16404ft )
			Na-adịghị arụ ọrụ	Om- 12192m (Oft- 40000ft)

*: N'ihi okwu ndakọrịta na ụfọdụ kaadị eserese, mgbe akara ngosi D-SUB na-abanye, ma ọ bụrụ na mkpebi 1920 × 1080@75Hz ọ bụrụ na njehie ọ bụla emee, biko dozie ọnụego ume ọhụrụ na 60Hz.

Ụdị ngosi akwadoro

TABLE

According to VESA standard, different operating systems and graphics cards may have a certain error (+/-1 HZ) when calculating refresh rate (field frequency), the specific refresh rate (field frequency) please refer to.The object shall prevail.

Ihe Ntinye

Pin Nke	Aha mgbaàmà	Pin Nke	Aha mgbaàmà	Pin Nke	Aha mgbaàmà
1.	Data TMDS 2+	9.	Data TMDS 0-	17.	DDC/CEC Ala
2.	TMDS Data 2 Shield	10.	TMDS Elekere+	18.	+ 5V Ike
3.	Data TMDS 2-	11.	Ogwe nchekwa TMDS	19.	Chọta Nkwụnye ọkụ
4.	Data TMDS 1+	12.	Oge TMDS-
5.	Data TMDS 1Shield	13.	CEC
6.	Data TMDS 1-	14.	Echekwara (NC na ngwaọrụ)
7.	Data TMDS 0+	15.	SCL
8.	TMDS Data 0 Shield	16.	SDA

USB-Signal Cable Signal Cable

Pin Nke	Aha mgbaàmà	Pin Nke	Aha mgbaàmà
	ML_Lane 3 (n)	11	GND
2	GND	12	ML_Lane 0 (p)
3	ML_Lane 3 (p)	13	OGUGU1
4	ML_Lane 2 (n)	14	OGUGU2
5	GND	15	AUX_CH (p)
6	ML_Lane 2 (p)	16	GND
7	ML_Lane 1 (n)	17	AUX_CH (n)
8	GND	18	Chọta Nkwụnye ọkụ
9	ML_Lane 1 (p)	19	laghachi DP_PWR
10	ML_Lane 0 (n)	20	DP_PWR

Nkwụnye na Play

Nkwụnye & Kpọọ Njirimara DDC2B

Ihe nleba anya a nwere ikike VESA DDC2B dị ka VESA DDC STANDARD si dị. Ọ na-enye ohere ka onye nleba anya gwa sistemụ nnabata ya njirimara yana, dabere n'ogo nke DDC ejiri, kwupụta ozi ndị ọzọ gbasara ike ngosi ya.
The DDC2B is a bi-directional data channel based on the 12C protocol. The host can request EDID information over the DDC2B channel.

Nkọwapụta nwebiisinka
MGBE EKPERE MULTIMEDIA INTERFACE

HDMI, HDMI High-Definition Multimedia Interface and other terms, HDMI trade appearance and HDMI labels are all HDMI Licensing Administrator, Inc.is a trademark or registered trademark.
Other trademarks, product names, service names and company names appearing in this specification and the products described in this specification are the property of their respective owners.

Nchọpụta nsogbu

Nsogbu & Ajụjụ	Ngwọta enwere ike
Igwe ọkụ ọkụ anaghị agbanahụ	Jide n'aka na bọtịnụ ọkụ agbanyụrụ na eriri ọkụ jikọtara ya nke ọma na ntinye ọkụ gbadoro ụkwụ na onye nleba anya.
Enweghị onyonyo na ihuenyo	Ejikọrọ eriri ọkụ ahụ nke ọma? Lelee njikọ eriri ọkụ na ọkụ ọkụ. Ejikọrọ eriri ahụ nke ọma? (ejikọrọ na iji eriri VGA) Check the VGA cable connection. (Connected using the HDMI cable) Check the HDMI cable connection. (Connected using the DP cable) Check the DP cable connection. * Ntinye VGA/HDMI/DP adịghị na ụdị ọ bụla. Ọ bụrụ na ike dị, malitegharịa kọmpụta ka ịhụ ihuenyo mbụ (ihuenyo nbanye), nke enwere ike ịhụ. Ọ bụrụ na ihuenyo mbụ (ihuenyo nbanye) pụtara, buut kọmputa ahụ na ọnọdụ ọdabara (ọnọdụ nchekwa maka Windows 7/8/10) wee gbanwee ugboro ole kaadị vidiyo. ( rụtụ aka na ịtọ ntọala kacha mma) Ọ bụrụ na ihuenyo mbụ (ihuenyo nbanye) apụtaghị, kpọtụrụ Ụlọ Ọrụ Ọrụ ma ọ bụ onye na-ere ahịa gị. Ị nwere ike ịhụ "Nkwado anaghị akwado ntinye" na ihuenyo? Ị nwere ike ịhụ ozi a mgbe mgbama sitere na kaadị vidiyo karịrị oke mkpebi na ugboro ole onye nleba anya nwere ike ijikwa nke ọma. Gbanwee mkpebi kachasị na ugboro ole onye nleba anya nwere ike ijikwa nke ọma. Gbaa mbọ hụ na etinyere ndị ọkwọ ụgbọ ala AOC Monitor.
Foto dị fuzzy & nwere nsogbu na-enyo enyo	Gbanwee ọdịiche na njikwa ihie. Pịa ka ịgbanwee akpaaka. Gbaa mbọ hụ na ị naghị eji eriri ndọtị ma ọ bụ igbe mgba ọkụ. Anyị na-akwado ịkwanye ihe nleba anya ozugbo na njikọ mmepụta kaadị vidiyo na azụ.
Foto na-arịgo, ndị na-efegharị efegharị ma ọ bụ ụkpụrụ ife pụtara na foto a	Bugharịa ngwaọrụ eletriki nwere ike ibute ndabichi eletriki n'ebe dị anya site na ileba anya ka enwere ike. Jiri ọnụego ume ọhụrụ kachasị nke onye nleba anya gị nwere na mkpebi ị na-eji.
Monitor Is Stuck In Active Off Mode”	Igwe ọkụ Kọmputa kwesịrị ịdị na ọnọdụ ON. Kaadị vidiyo Kọmputa kwesịrị ka etinye ya nke ọma na oghere ya. Gbaa mbọ hụ na ejikọrọ eriri vidiyo nke onye nleba anya na kọmputa nke ọma. Lelee eriri vidiyo nke onye nleba anya ma hụ na ọ nweghị pin agbagọ. Jide n'aka na kọmputa gị na-arụ ọrụ site na ịpị igodo CAPS LOCK na ahụigodo ka ị na-ekiri CAPS LOCK LED. Igwe ọkụ ahụ kwesịrị ịgbanwuo ma ọ bụ gbanyụọ mgbe ọ kụsịrị igodo LOCK CAPS.
Na-efu otu n'ime agba ndị bụ isi (RED, GREEN, ma ọ bụ anụnụ anụnụ)	Lelee eriri vidiyo nke onye nleba anya ma hụ na ọ nweghị pin mebiri emebi. Gbaa mbọ hụ na ejikọrọ eriri vidiyo nke onye nleba anya na kọmputa nke ọma.
Onyonyo ihuenyo adịghị n'etiti ma ọ bụ nha nke ọma	Dezie H-Ọnọdụ na V-Ọnọdụ ma ọ bụ pịa igodo ọkụ (AUTO).
Foto nwere ntụpọ agba (ọcha anaghị adị ọcha)	Gbanwee agba RGB ma ọ bụ họrọ okpomoku agba achọrọ.
Ọgbaghara kwụ ọtọ ma ọ bụ kwụ ọtọ na ihuenyo	Jiri Windows 7/8/10 mode mechiri emechi ka ịhazie CLOCK na FOCUS. Pịa ka ịhazie akpaghị aka.
Iwu & Ọrụ	Biko rụtụ aka na Iwu & Ozi Ọrụ nke dị na ntuziaka CD ma ọ bụ www.aoc.com (ịchọta ihe nlereanya ị zụrụ na obodo gị yana ịchọta Iwu & Ozi Ọrụ na ibe Nkwado.

Akwụkwọ / akụrụngwa

AOC 22B15H2 LCD nlekota oru [pdf] Akwụkwọ ntuziaka onye ọrụ
22B15H2, 22B15H2 LCD Monitor, 22B15H2, LCD Monitor, Monitor

Ntụaka

Akwụkwọ ntuziaka onye ọrụ

AOC 22B15H2 LCD nlekota oru

Nchekwa