Altronix Maximal1RHD Avanoa Pule Pule Fa'aaogā Tusi Taiala
Ua umaview
Altronix Maximal Rack Mount Series iunite tufatufaina ma fesuiai le paoa e maua ai faiga pulea ma mea faaopoopo. Latou te fa'aliliuina se fa'aoga 115VAC, 50/60Hz i totonu o le valu (8) po'o le sefuluono (16) fa'atonu tuto'atasi 12VDC ma/po'o le 24VDC PTC galuega fa'asaoina. E fa'agaoioia galuega e ala i se fa'aulu e masani ona matala (LE'AI) po'o le masani ona tapuni (NC) fa'aoso fa'aoso fa'aulu mai se Access Control System, Card Reader, Keypad, Push Button, PIR, etc. Units o le a fa'aosoina le mana i le tele o avanoa e pulea masini masini e aofia ai. : Loka Mag, Tu'i Fa'aeletise, Fa'amau Faitoto'a, ma isi mea. O le a fa'agaoioia mea e lua i le Fail-Safe ma/po'o le Fail-Secure modes. O le FACP Interface e mafai ai le Faʻalavelave Faʻafuaseʻi, Mataʻituina o le Alarm, pe faʻaaogaina e faʻaosoina ai isi masini fesoasoani. O le fa'aaliga motusia fa'ailo afi e mafai ona filifilia ta'ito'atasi mo so'o se fa'atinoga uma (silasila i le siata i lalo).
Siata Fa'asologa Fa'asologa o Fa'amau Fa'amau aupito maualuga:
| AltronixModel Numera | Sapalai Malosiaga 1(8 galuega faatino) | Sapalai Malosiaga 2(8 galuega faatino) | Aofa'iga Fa'aola i le taimi nei | PTCProtected Auto- Toe Toe Toe Fa'atonu Galuega | Ole maualuga ole taimi nei PerACM8CBR-MOutput | 115VAC50/60HzInput (fa'ata'i nei) | Fa'ailoga Fuse Fuse Fa'atonu a le Komiti Fa'atonu Fa'atonu |
| aupito maualuga1RHD | 12VDC @ 4A | N/A | 4A | 8 | 2.0A | 1.9A | 5A/250V |
| 24VDC @ 3A | N/A | 3A | |||||
| aupito maualuga1RD | 12VDC @ 4A | N/A | 4A | 16 | 2.0A | 1.9A | 5A/250V |
| 24VDC @ 3A | N/A | 3A | |||||
| aupito maualuga3RHD | 12VDC @ 6A | N/A | 6A | 8 | 2.0A | 1.9A | 3.5A/250V |
| 24VDC @ 6A | N/A | ||||||
| aupito maualuga3RD | 12VDC @ 6A | N/A | 6A | 16 | 2.0A | 1.9A | 3.5A/250V |
| 24VDC @ 6A | |||||||
| aupito maualuga33RD | 12VDC @ 6A | 12VDC @ 6A | 12A | 16 | 2.0A | 3.8A | 3.5A/250V |
| 24VDC @ 6A | 24VDC @ 6A | ||||||
| 12VDC @ 6A | 24VDC @ 6A |
Fa'amatalaga
Ulufale:
- E masani ona tapuni [NC] po'o le masani ona tatala [LEAI] mea e fa'afeso'ota'i mago (sui filifili).
Fa'atino:
- Ta'ito'atasi filifili Mag Loka/Taia (Fail-Saogalemu, Fail-Secure) tulaga mautu PTC puipuia malosiaga gaosiga.
- Puipuiga fa'avevela ma pupu'u fa'atasi ma le toe setiina otometi.
Fetufa'aiga Fa'ailoga afi:
- Motu'u le Fa'ailoga Afi (fa'amau i le toe setiina po'o le le fa'amauina) e mafai ona filifilia ta'ito'atasi mo so'o se mea po'o galuega uma.
- Le mafai ona toe setiina mamao mo le fa'apipi'iina o le fa'aogaina o le Fa'ailoga Afi.
- Fa'ailoga afi motu'ese filifiliga fa'aoga:
a) E masani ona tatala [LEAI] po'o le masani ona tapuni [NC] mea fa'afeso'ota'i mago.
b) Faiga fa'aliliuga fa'apolokalame mai le fa'ailoga fa'ailoga FACP.
Fa'ailoga Vaaia:
- Ta'iala Tulaga Tulaga Ta'ito'atasi o lo'o i luga ole laulau pito i luma.
Fa'aola ma'a:
- O lo'o fa'apipi'i i totonu o uta mo ma'a ta'ita'i fa'amaufa'ailoga po'o ma'a ituaiga gel (E mana'omia se pa'aga tu'uese mo ma'a).
- Ole maualuga ole tau ole 0.7A.
- Otometi fesuiaʻi i luga e tu i le maa pe a le faia AC.
- Zero voltage pa'u pe a sui le iunite i le maa (tulaga ua faaletonu AC).
Vaavaaiga:
- Fa'atonu le AC (fa'afeso'ota'i “C”).
- Maualalo le vaavaaiga o maa (faiga "C" fesootaiga).
Vaega Faaopoopo:
- O poloka fa'amau e mafai ona aveese ma fa'amau fa'amau fa'amau.
- 3-uaea laina uaea.
- Fa'amalama matai mana motusia le va'a fa'atasi ma le toe setiina o le tusi.
Fua o Fata (H x W x D):
3.25” x 19.125” x 8.5”
(82.6mm x 485.8mm x 215.9mm).
Fa'atonuga fa'apipi'i:
Taua: Fetuuna'i galuega voltags ma le Fuimu Fa'aaliga Fa'afeso'ota'i fa'atonuga a'o le'i tu'uina le iunite i totonu o le fata.
- Vaevae le pito i lalo ma le pito i luga o le fata fa'amau e ala i le aveeseina o fa'avili e ono (6 Fa'ailoga Fa'ainisinia ma Fua, itulau 12).
FAATUATUA: Aua ne'i pa'i i vaega u'amea fa'aalia. Tapuni le eletise o le lala a'o le'i fa'apipi'i po'o le tautuaina o meafaigaluega. E leai ni vaega e mafai ona fa'aaogaina i totonu. Fa'asino le fa'apipi'iina ma le tautuaina i tagata faigaluega fa'apitoa. - Seti galuega faatino voltage:
Filifili DC galuega faatino voltagu e ala i le setiina o le SW1 i luga o le (s) laupapa sapalai eletise (Ata. 1a, itulau 6) i le tulaga talafeagai (Volo o Galuega.tagu ma Siata Fa'amatalaga Tu'itu'i, itulau. 5). Mo Maximal33RD seti ta'itasi o le valu (8) galuega e mafai ona seti mo le 12VDC po'o le 24VDC (ex.ample: valu (8) galuega faatino @ 12VDC ma valu (8) galuega faatino @ 24VDC). - Fa'ailoga fa'aoso fa'apolokalame filifiliga:
O le iunite e mafai ona fa'apolokalameina e fa'agaoioi i se mea e masani ona tatala pe masani ona tapuni fa'aoga mai masini e pulea avanoa e ala i le setiina o ki SW3 i luga o le laupapa ACM8CBR-S po'o le ACM16CBR-S i le tulaga talafeagai (Fig. 2b, pg. 7); OFF mo le [NC] e masani ona tapuni fa'aoso mea fa'aoso po'o ON mo se mea e masani ona tatala [LEAI]. - Filifiliga o polokalame fa'atino:
a. E mafai ona fa'apolokalame ia fa'atinoga uma a le o le Fail-Safe (ie mag loka), Fail-Secure (e pei o le eletise) po'o so'o se tu'ufa'atasiga o mea ta'itasi e ala i le fa'atulagaina o ki OUTPUT SELECT dip (1-8) i le ACM8CBR-S. laupapa i le tulaga talafeagai; ON mo galuega faatino Fail Safe po'o OFF mo galuega fai Fail-Secure (Ata 2a, itulau 7).
Fa'aaliga: o le a mulimuli le fa'atulagaina o galuega i le filifiliga fa'aoso
b. Ina ia mafai e le FACP Disconnect mo se gaioiga e tatau ona i ai le ki o le FIRE ALARM INTERFACE i le tulaga ON. Ina ia tape le FACP Aveese le FIRE ALARM INTERFACE dip ki (1-8) i luga o le laupapa ACM8CBR-S/ACM16CBR-S e tatau ona i ai i le tulaga OFF (Fig. 2a, itulau 7). - Filifiliga fa'afeso'ota'i fa'aala afi afi:
O le [NC] e masani ona tapuni, e masani ona tatala [LEAI] fa'aoga po'o le fa'aliliuina o polarity mai se fa'ailoga fa'ailoga FACP o le a fa'aosoina ai galuega ua filifilia (Fig. 6-11, pg. 9). Ina ia fa'apolokalame le Fuimu Fa'aala Fa'afeso'ota'i seti su'e SW1 ma SW2 i luga o le laupapa ACM8CBR-M i tulaga talafeagai (Fig. 3a ma 3b, pg. 7) (Fire Alarm Interface Switch Settings pg. 5). - Fesootaiga maa:
Mo fa'aoga fa'atonuga o ma'a e filifili. Afai e le fa'aogaina maa, o le leiloa o le AC o le a i'u ai i le leiloa o le voltagu. A fa'aaoga maa, e tatau ona fa'aa'a'a po'o ituaiga gel. Fa'afeso'ota'i le tasi (1) ma'a i fa'amau fa'ailoga [- BAT +] mo le fa'aogaina o le 12VDC. Fa'aaogā maa e lua (2) 12VDC e fa'asolo fa'asologa mo le fa'aogaina o le 24VDC (Fig. 4b, 5b, pg. 8). O le fata fa'apipi'i fa'amau e le ofi ni ma'a. E mana'omia se pa'a tu'ueseese.
Fa'aaliga: A fa'aoga le Maximal33RD fa'atasi ma le fa'aola maa, e lua (2) ma'a eseese po'o seti o ma'a e tatau ona fa'aoga. - Ma'a ma AC Supervision galuega faatino:
Fa'afeso'ota'i le masini fa'asilasilaga talafeagai i fa'ailoga ua fa'ailoga AC Fai ma le Ma'a i luga o le (s) laupapa sapalai (Ata. 4a/5a, itulau 8). Fa'aaoga le 22AWG i le 18AWG mo le AC Fail ma Low/Leai lipoti maa. - Toe fa'aopoopo le pito i lalo ma le pito i luga o le fata fa'amau e ala i le fa'amauina o fa'ailoga e ono (6). (Fa'a Mechanical Drawing ma Fua itulau. 12).
- Fa'apipi'i fa'amauga fa'amau i le fa'afa'amauga Mauga Maximal mo fa'amaufa'ailoga mana'omia po'o fa'apipi'i puipui (Ata. 12-14, itulau 10).
- Fa'amau i le fata e mana'omia. Aua ne'i fa'alavelave le savili ea i autafa.
- Seti le eletise motumotu taamilo i le tulaga OFF (Ata 15a, itulau 12).
- Fa'afeso'ota'i le uaea eletise i se pusa fa'amau 115VAC 50/60Hz (Ata 15b, itulau 12).
- Seti le eletise motumotu ta'amilosaga i le tulaga ON (Ata 15a, itulau 12).
- Fua le voltagu a'o le'i fa'afeso'ota'i masini. E fesoasoani lea e aloese ai mai le faaleagaina.
- Seti le eletise motumotu taamilo i le tulaga OFF (Ata 15a, itulau 12).
- So'oga fa'aoso fa'aulu:
Fa'afeso'ota'i fa'aoso fa'aulu mai masini fa'atonutonu avanoa i fa'amau e mafai ona fa'ailogaina [IN1 ma le GND] e o'o atu i le [IN8 ma le GND] mo Maximal1RHD ma Maximal3RHD. Mo Maximal1RD, Maximal3RD ma Maximal33RD fa'afeso'ota'i masini i le seti lona lua o fa'ailoga fa'ailoga. Ia mautinoa o masini e fetaui ma tulaga o le SW3 i le Laasaga 3 (Fa'a Mechanical Drawing ma Fua itulau 12) - So'oga fa'aulufale:
Fa'afeso'ota'i masini e fa'aola i fa'amau e mafai ona aveese fa'ailoga [– OUT1 +] i le [- OUT8 +] mo Maximal1RHD ma Maximal3RHD. Mo Maximal1RD, Maximal3RD ma Maximal33RD fa'afeso'ota'i masini i le seti lona lua o fa'ailoga fa'ailoga [- OUT1 +] i le [- OUT8 +] (Ata 15c, itulau 12). - Filifiliga feso'ota'iga Fa'aala afi afi:
a. Fa'afeso'ota'i le fa'aulu ole FACP ile fa'ailoga e mafai ona aveese fa'ailoga FACP1 ma FACP2. Pe a faʻaaogaina le suiga o le polarity mai se faʻailoga faʻailoga FACP, faʻafesoʻotaʻi le leaga [-] i le faʻailoga faʻailoga FACP1 ma le lelei i le faʻamaufaʻailoga faʻailoga FACP2 (polarity o loʻo i le tulaga faʻailo) (Rack Mechanical Drawing and Dimensions pg. 12).
b. Mo se feso'ota'iga fa'amaufa'ailoga afi fa'afeso'ota'i le ki e masani ona toe setiina [LEAI] i fa'amau e mafai ona aveese ua fa'ailoga [REST] ma le [GND] (Fig. 6-11, itulau 9). - Seti le eletise motumotu ta'amilosaga i le tulaga ON (Ata 15a, itulau 12)
Tausiga
E tatau ona fa'ata'ita'i le iunite ia le itiiti ifo ma le fa'atasi i le tausaga mo le fa'agaioiga talafeagai e fa'apea: Voltagu Su'ega: I lalo o tulaga masani o uta o le DC voltage tatau ona siaki mo voltage tulaga (Goofua Voltagu ma Siata Fa'amatalaga Tu'itu'i, itulau. 5).
Su'ega ma'a: I lalo o tulaga masani o uta siaki ua uma le maa, siaki le voltagu i fa'amauga maa ma fa'amau fa'amau laupapa ua fa'ailoga [– BAT +] ina ia mautinoa e leai se motusia o uaea feso'ota'iga maa.
Fa'asagaga o Suiga Fa'aala afi afi:
| Sui Tulaga | FACP Ulufale | |
| SW1 | SW2 | |
| TOTO | OF | Fa'ailoga Fa'ailoga FACP (Polarity Reversal). |
| ON | ON | E masani ona tapuni [NC] fa'aoso mea. |
| ON | TOTO | Tatala masani [LEAI] Fa'aoso Fa'auiga. |
Galuega Faatino Voltagu ma Siata Fa'amatalaga Tutu-ati:
| Altronix Fa'ata'ita'iga | Komiti Fa'atonu | Ma'a | 20 Min. o Lagolago | 4 Hr. o Lagolago | 24 Hr. o Lagolago |
| Maximal1RH Maximal1R | OLS120(Silasila i le Ata 1a, itulau 4 mo Suiga [SW1] nofoaga ma tulaga) | 12VDC/40AH* | N/A | 3.5A | 0.5A |
| 24VDC/40AH* | N/A | 2.7A | 0.7A | ||
| Maximal3RH Maximal3R Maximal33R | AL600ULXB(Silasila i le Ata 1a, itulau 4 mo Suiga [SW1] nofoaga ma tulaga) | 12VDC/40AH* | N/A | 5.5A | 5.5A |
| 24VDC/40AH* | N/A | 5.5A | 0.7A |
Su'esu'ega LED:
| LED | Tulaga Malosiaga | |
| Mumu (DC) | lanu meamata (AC) | |
| ON | ON | Tulaga masani o faʻagaioiga. |
| ON | TOTO | Ga'imau AC. Ma'a tu'u tu'u atu le mana. |
| TOTO | ON | Leai se DC output. Tulaga pu'upu'u po'o le mamafa o le vevela. |
| TOTO | TOTO | Leai se DC output. Ga'imau AC. Ma'a ua uma. |
Fa'aa'e LED i luma Panel
| ON | Fa'aoso fa'aoso. |
| Fa emoemo | FACP motusia. |
LAPATAIGA: Ina ia faʻaitiitia le lamatiaga o le afi poʻo le eletise eletise, aua le faʻaalia le iunite i timuga poʻo susu. O lenei fa'apipi'i e tatau ona faia e tagata faigaluega agava'a ma e tatau ona ogatusa ma le National Electrical Code ma tulafono fa'alotoifale uma.
O le uila o le uila ma le faʻailoga o le aū i totonu o le tafatolu tutusa e faʻamoemoe e faʻailoa ai le tagata faʻaoga i le i ai o se faʻamaʻi faʻafefe VOL.TAGE i totonu o le pa o le oloa atonu e lava lona telē e fa'atupu ai se te'i eletise.
O le fa'ailoga o lo'o i totonu o se tafatolu tutusa e fa'amoemoe e fa'ailoa ai le tagata fa'aoga i le iai o fa'atonuga taua o le fa'agaioiga ma le tausiga (au'aunaga) i tusitusiga o lo'o fa'atasi ma le masini.
Polokalama Tuuina atu Malosiaga Voltage Fa'atonu:
Fetufa'aiga Fa'ailoga Afi, Filifiliga o Galuega, ma Ituaiga Tulaga:
Komiti Fa'atonu
FACP Hook-Up Ata
E masani ona tapunia fa'aulu mai FACP
E masani ona tatala fa'aulu mai FACP
Filifiliga Fa'amau:
Fa'apipi'i Fa'amau
- Aveese le fa'amaufa'ailoga tutotonu mai le fata fa'amau (Ata. 12).
- Fa'ase'e puipui fa'amau (A) i totonu o avanoa o lo'o i le itu agavale ma le itu taumatau o le fata (Ata 13a). Fa'aaogā fa'a sikulima (B) e tolu (3) e fa'amau ai puipui.
- Tu'u ma le faaeteete le ufi mata i luga o le LED, ma fa'aoga le tolu (3) fa'amau fa'aulu (C) i luga ae tolu (3) fa'amau fa'aulu (C) i le pito i lalo o le fa'ailoga mata (Ata 13b).
- Fa'ase'e le iunite i totonu o le fata e mana'omia EIA 19” ma fa'amau i fa'amau fa'amau (e le o aofia ai) (Ata 13c).
Fa'apipi'iina o puipui
- Tuu ma le faaeteete le ufi mata i luga o le LED, ma fa'aoga fa'aoga fa'amau fa'aulu e tolu (3) (C) i luga ae tolu (3) fa'amau fa'aulu (C) i le pito i lalo ole fa'amau (Ata 14a).
- Tu'u fa'amau fa'amau (A) i le itu o le itu agavale ma le itu taumatau o le fata (Ata 14b). Fa'aaogā fa'asili fa'ato'a e tolu (3) e fa'amau ai fa'amau fa'amau.
- Fa'amau le fata ma fa'amau fa'amau i fa'amau fa'amau (e le'o aofia ai) (Ata. 14c)
Fa'ailoga Fa'ainisinia ma Fua
Pepa / Punaoa
 |
Altronix Maximal1RHD Avanoa Pule Pule [pdf] Tusi Taiala Maximal1RHD Avanoa Pule Pule, Maximal1RHD, Avanoa Pule Pule, Pule Pule |
