Altronix Maximal1RHD Jagorar Mai Amfani Mai Kula da Wuta

Ƙarsheview

Altronix Maximal Rack Mount Series raka'a suna rarrabawa da canza iko don samun damar tsarin sarrafawa da na'urorin haɗi. Suna juyar da shigarwar 115VAC, 50/60Hz zuwa takwas (8) ko goma sha shida (16) masu sarrafa kansu na 12VDC da/ko 24VDC PTC da aka kare. Ana kunna fitar da fitarwa ta hanyar buɗaɗɗen shigar da buɗaɗɗen (NO) ko kuma rufe (NC) busassun shigar da busassun shigarwa daga Tsarin Gudanar da Samun damar, Mai Karatun Kati, Maɓalli, Maɓallin Tura, PIR, da sauransu. Raka'a za su tura wuta zuwa na'urorin sarrafa dama iri-iri ciki har da Makullan Mag, Harjin Lantarki, Masu riƙe da Ƙofa na Magnetic, da sauransu. Abubuwan da aka fitar za su yi aiki a cikin yanayin rashin aminci da/ko rashin aminci. Fuskar FACP tana ba da damar Ƙaddamar Gaggawa, Kula da Ƙararrawa, ko ƙila a yi amfani da su don haifar da wasu na'urori masu taimako. Za'a iya zaɓin fasalin cire haɗin ƙararrawar wuta daban-daban don kowane ko duk abubuwan da aka fitar (duba ginshiƙi a ƙasa).

Matsakaicin Tsarin Tsarin Kanfigareshan Rack Mount:

Lambar AltronixModel	Samar da Wutar Lantarki 1(fitowa 8)	Samar da Wutar Lantarki 2(fitowa 8)	Jimlar Fitar Yanzu	PTCProtected Atomatik-Sake Saitin Abubuwan Fitarwa	Matsakaicin PerACM8CBR-MOutput na Yanzu	115VAC50/60HzInput (zane na yanzu)	Ƙididdiga Fuse na Hukumar Samar da Wuta
Maximal1RHD	12VDC @ 4A	N/A	4A	8	2.0 A	1.9 A	5A/250V
	24VDC @ 3A	N/A	3A
Maximal1RD	12VDC @ 4A	N/A	4A	16	2.0 A	1.9 A	5A/250V
	24VDC @ 3A	N/A	3A
Maximal3RHD	12VDC @ 6A	N/A	6A	8	2.0 A	1.9 A	3.5A/250V
	24VDC @ 6A	N/A
Maximal3RD	12VDC @ 6A	N/A	6A	16	2.0 A	1.9 A	3.5A/250V
	24VDC @ 6A
Maximal33RD	12VDC @ 6A	12VDC @ 6A	12 A	16	2.0 A	3.8 A	3.5A/250V
	24VDC @ 6A	24VDC @ 6A
	12VDC @ 6A	24VDC @ 6A

Ƙayyadaddun bayanai

Abubuwan shigarwa:

• Yawanci rufe [NC] ko buɗe [NO] busassun abubuwan shigar da lamba (canza zaɓi).

Abubuwan da aka fitar:

• Makulli/Yajin Mag (Rashin-Safe, Fail-Secure) wani yanki mai ƙarfi na PTC mai kariyar wutar lantarki.
• Kariyar zafi da gajeriyar kewayawa tare da sake saiti ta atomatik.

Interface Ƙararrawar Wuta:

• Cire haɗin žararrawar wuta (latching tare da sake saiti ko mara latching) ana iya zaɓa ɗaya ɗaya don kowane ko duk abubuwan da aka fitar.
• Ƙarfin sake saiti na nisa don rufe yanayin mu'amalar ƙararrawa na Wuta.
• Zaɓuɓɓukan shigar da ƙararrawar wuta:
  a) Akan buɗe [NO] ko rufe [NC] busasshen shigar da lamba.
  b) Shigar da juyar da polarity daga da'irar siginar FACP.

Alamun gani:

• LEDs Matsayin Fitarwa ɗaya ɗaya wanda yake akan ɓangaren gaba.

Ajiyayyen Baturi:

• Caja da aka gina a ciki don rufaffiyar gubar acid ko nau'in batura nau'in gel (ana buƙatar shinge daban don batura).
• Matsakaicin caji na yanzu 0.7A.
• Canja atomatik zuwa baturin jiran aiki lokacin da AC ta gaza.
• Zero voltage sauke lokacin da naúrar ta canza zuwa madadin baturi (yanayin gazawar AC).

Kulawa:

• AC gaza kulawa (form "C" lamba).
• Ƙananan kula da baturi (form "C" lamba).

Ƙarin Halaye:

• Tubalan tasha masu cirewa tare da kulle dunƙule flange.
• 3- igiyar layin waya.
• Haskaka babban ikon cire haɗin keɓaɓɓiyar kewayawa tare da sake saitin hannu.
  Girman Rack (H x W x D):
  3.25" x 19.125" x 8.5"
  (82.6mm x 485.8mm x 215.9mm).

Umarnin Shigarwa:

Muhimmi: Daidaita fitarwa voltages da Ƙaddamarwar Ƙararrawar Wuta kafin shigar da naúrar a cikin tara.

1. Rarrabe ƙasa da saman ɗigon ɗigon tukwane ta hanyar cire sukurori shida (6) (Rack Mechanical Drawing and Dimensions, shafi 12).
   HANKALI: Kar a taɓa sassan ƙarfe da aka fallasa. Kashe wutar da'irar reshe kafin shigarwa ko kayan aiki. Babu sassa masu amfani a ciki. Koma shigarwa da hidima ga ƙwararrun ma'aikatan sabis.
2. Saita fitarwa voltage:
   Zaɓi fitarwa DC da ake so voltage ta hanyar saita SW1 akan allon samar da wutar lantarki (Fig. 1a, shafi 6) zuwa matsayin da ya dace (Fitowa Vol.tage da Taswirar Ƙayyadaddun Tsaya, shafi. 5). Domin Maximal33RD kowane saitin na takwas (8) za a iya saita shi don 12VDC ko 24VDC (misali.ample: takwas (8) fitarwa @ 12VDC da takwas (8) fitarwa @ 24VDC).
3. Zaɓuɓɓukan shirye-shiryen shigar da faɗakarwa:
   Za a iya tsara naúrar don yin aiki tare da ko dai buɗewa ta al'ada ko rufewa ta al'ada daga na'urorin sarrafawa ta hanyar saita masu sauyawa SW3 akan ko dai ACM8CBR-S ko ACM16CBR-S zuwa matsayi mai dacewa (Fig. 2b, shafi 7); KASHE don shigarwar faɗakarwa [NC] ta al'ada ko ON don shigarwar [NO] kullum.
4. Zaɓuɓɓukan shirye-shiryen fitarwa:
   a. Za a iya tsara abubuwan da aka fitar don zama ko dai duk Fail-Safe (watau makullin magn), duk Fail-Secure (watau yajin lantarki) ko kowane haɗin kowane ta hanyar saita madaidaitan OUTPUT SELECT dip switches (1-8) akan ACM8CBR-S jirgi zuwa matsayi mai dacewa; ON don gazawar Safe kayan fitarwa ko KASHE don Ƙarfin-Tsaron abubuwan da aka samu (Fig. 2a, shafi 7).
   Lura: Tsarin fitarwa zai bi zaɓin shigar da kunnawa
   b. Don kunna Cire haɗin FACP don fitarwa dole ne madaidaicin FIRE ALARM INTERFACE sauyawa ya kasance a cikin ON. Don kashe FACP Cire haɗin FIRE ALARM INTERFACE dip switches (1-8) akan allon ACM8CBR-S/ACM16CBR-S dole ne ya kasance a cikin KASHE (Hoto 2a, shafi 7).
5. Zaɓuɓɓukan haɗuwa da Interface Ƙararrawa:
   Rufe [NC], yawanci buɗe [NO] shigarwa ko jujjuyawar polarity daga da'irar siginar FACP zai haifar da abubuwan da aka zaɓa (Figs. 6-11, shafi 9). Don shirin sarrafa wuta mai amfani da wuta ya yi tsoma sa Switches SW1 da SW2 a kan kujerar ACM8CBR zuwa matsayin da suka dace (Figs Gyaran Fion Gyarawa Pg. 3).
6. Haɗin Baturi:
   Don aikace-aikacen sarrafa dama batir ba zaɓi bane. Idan ba a yi amfani da batura ba, asarar AC zai haifar da asarar juzu'in fitarwatage. Lokacin da ake amfani da batura, dole ne su zama nau'in gubar acid ko gel. Haɗa baturi ɗaya (1) zuwa tashoshi masu alama [- BAT +] don aikin 12VDC. Yi amfani da batura guda biyu (2) 12VDC masu wayoyi a jere don aikin 24VDC (Hoto 4b, 5b, shafi 8). Wurin ɗorawa ɗora ba zai ɗauki batura ba. Ana buƙatar shingen baturi daban.
   Lura: Lokacin amfani da Maximal33RD tare da ajiyar baturi, dole ne a yi amfani da batura guda biyu (2) daban ko saitin batura.
7. Fitowar Baturi da Kulawar AC:
   Haɗa na'urar siginar sanarwar da ta dace zuwa tashoshi masu alamar gazawar AC da gazawar baturi akan allon samar da wutar lantarki (Fig. 4a/5a, shafi 8). Yi amfani da 22AWG zuwa 18AWG don gazawar AC da Ƙananan / Babu rahoton baturi.
8. Sake haɗa ƙasa da saman rack mount chassis ta ɗaure sukurori shida (6). (Rack Mechanical Drawing and Dimensions shafi na 12).
9. Haɗa ƙwanƙolin ɗamara zuwa ɗigon ɗigon ɗamara Maximal don tarawar da ake so ko shigarwar bango (Fig. 12-14, shafi 10).
10. Dutsen a cikin wurin da ake so. Kar a toshe hanyoyin iska na gefe.
11. Saita na'urar cire haɗin wutar lantarki zuwa matsayin KASHE (Fig. 15a, shafi 12).
12. Toshe igiyar wutar lantarki zuwa madaidaicin 115VAC 50/60Hz (Hoto 15b, shafi 12).
13. Saita na'urar cire haɗin wutar lantarki zuwa matsayin ON (Fig. 15a, shafi 12).
14. Auna fitarwa voltage kafin haɗa na'urori. Wannan yana taimakawa guje wa lalacewa mai yuwuwa.
15. Saita na'urar cire haɗin wutar lantarki zuwa matsayin KASHE (Fig. 15a, shafi 12).
16. Hanyoyin shigar da jawo:
    Haɗa abubuwan shigar da Buɗaɗɗen Al'ada ko Rufewa ta al'ada daga na'urorin sarrafa damar shiga zuwa tashoshi masu cirewa masu alamar [IN1 da GND] ta [IN8 da GND] don Maximal1RHD da Maximal3RHD. Don Maximal1RD, Maximal3RD da Maximal33RD suna haɗa na'urori zuwa saitin tashoshi na biyu da aka yiwa alama. Tabbatar cewa na'urorin sun dace da saitunan SW3 a mataki na 3 (Rack Mechanical Drawing and Dimensions shafi na 12)
17. Hanyoyin haɓakawa:
    Haɗa na'urorin don kunna wutar lantarki zuwa tashoshi masu cirewa masu alamar [- OUT1 +] zuwa [- OUT8 +] don Maximal1RHD da Maximal3RHD. Don Maximal1RD, Maximal3RD da Maximal33RD suna haɗa na'urori zuwa saitin tashoshi na biyu da aka yiwa alama [- OUT1 +] zuwa [- OUT8 +] (Fig. 15c, shafi 12).
18. Zaɓuɓɓukan haɗin haɗin ƙararrawa na wuta:
    a. Haɗa shigarwar faɗakarwar FACP zuwa tashoshi masu cirewa masu alamar FACP1 da FACP2. Lokacin amfani da jujjuyawar polarity daga da'irar siginar FACP, haɗa maras kyau [-] zuwa tashar da aka yiwa alama FACP1 da tabbataccen tasha mai alama FACP2 (polarity yana cikin yanayin ƙararrawa) (Rack Mechanical Drawing and Dimensions pg. 12).
    b. Don ƙararrawar ƙararrawar wuta ta haɗa maɓallin sake saiti na yau da kullun [NO] zuwa tashoshi masu cirewa masu alamar [REST] da [GND] (Figs. 6-11, shafi 9).
19. Saita na'urar cire haɗin wutar lantarki zuwa matsayin ON (Hoto 15a, shafi 12)

Kulawa

Ya kamata a gwada naúrar aƙalla sau ɗaya a shekara don aikin da ya dace kamar haka: Fitowa Voltage Gwaji: A ƙarƙashin yanayin kaya na yau da kullun, fitarwar DC voltage ya kamata a duba don daidai voltage matakin (Output Voltage da Taswirar Ƙayyadaddun Tsaya, shafi. 5).
Gwajin Baturi: A ƙarƙashin yanayin kaya na al'ada duba cewa an cika cajin baturin, duba ƙayyadaddun voltage a tashoshin baturi da kuma tashoshin allon allon da aka yiwa alama [- BAT +] don tabbatar da cewa babu karya a cikin wayoyin haɗin baturi.

Saitunan Canjawar Mutuwar Ƙararrawa:

Canja Matsayi		Shigar da FACP
Farashin SW1	Farashin SW2
KASHE	KASHE	Da'irar siginar FACP (Sake Juyawa).
ON	ON	Yawanci Rufewa [NC] Shigar da Ƙaddamarwa.
ON	KASHE	Akan Buɗe [NO] Ƙaddamar Shigarwa.

Fitarwa Voltage da Tsayuwar Taswirar Takaddamawa:

Altronix Model	Hukumar Samar da Wutar Lantarki	Baturi	20 Min. na Ajiyayyen	4 Hr. na Ajiyayyen	24 Hr. na Ajiyayyen
Mafi kyawun 1RH Maximal1R	Farashin 120(Duba hoto na 1a, shafi na 4 don Sauyawa [SW1] wuri da matsayi)	12VDC/40AH*	N/A	3.5 A	0.5 A
		24VDC/40AH*	N/A	2.7 A	0.7 A
Maximal3RH Maximal3R Maximal33R	Saukewa: AL600ULXB(Duba hoto na 1a, shafi na 4 don Sauyawa [SW1] wuri da matsayi)	12VDC/40AH*	N/A	5.5 A	5.5 A
		24VDC/40AH*	N/A	5.5 A	0.7 A

LED Diagnostics:

LED		Matsayin Samar da Wuta
Ja (DC)	Green (AC)
ON	ON	Yanayin aiki na al'ada.
ON	KASHE	Asarar AC. Batir yana ba da ƙarfi ta tsaye.
KASHE	ON	Babu fitarwa na DC. Gajeren kewayawa ko yanayin hawan zafi.
KASHE	KASHE	Babu fitarwa na DC. Asarar AC. Baturi da aka fitar.

Fitar LEDs a gaban Panel

ON	Ana kunna fitarwa.
Linirƙiri	cire haɗin FACP.

GARGADI: Don rage haɗarin gobara ko girgizar lantarki, kar a bijirar da naúrar ga ruwan sama ko danshi. ƙwararrun ma'aikatan sabis ne suka yi wannan shigarwa kuma yakamata ya dace da ka'idar Lantarki ta ƙasa da duk lambobin gida.

 Walƙiya mai walƙiya tare da alamar kibiya a cikin madaidaicin alwatika an yi niyya don faɗakar da mai amfani ga kasancewar keɓaɓɓen VOL mai haɗari.TAGE a cikin shingen samfurin wanda zai iya zama isashen girma don zama girgizar lantarki.

 Wurin faɗakarwa a cikin madaidaicin alwatika an yi niyya don faɗakar da mai amfani game da kasancewar mahimman umarni na aiki da kiyayewa (sabis) a cikin wallafe-wallafen da ke tare da na'urar.

Fitar da Wutar Lantarki Voltage Saituna:

Interface Ƙararrawar Wuta, Zaɓin Fitarwa, da Nau'in shigarwa:

Hukumar Samar da Wutar Lantarki

Zane-zane na Hook-Up FACP

Gabaɗaya Shigarwar Rufewa daga FACP

Kullum Buɗe Input daga FACP

Zaɓuɓɓukan hawa:

Rack Mount Installation

1. Cire takalmin gyaran kafa na tsakiya daga ɗigon ɗorawa (Fig. 12).
2. Maƙallan hawa na zamewa (A) cikin ramummuka dake gefen hagu da dama na shingen tara (Hoto 13a). Yi amfani da skru guda uku (3) lebur na kai (B) don amintattun maƙallan.
3. A hankali sanya faceplate a kan LEDs, kuma amintacce ta amfani da sukurori guda uku (3) kwanon rufi (C) a sama da uku (3) skru na kwanon rufi (C) a ƙasan faceplate (Fig. 13b).
4. Wurin zamewa zuwa matsayin EIA 19” da ake so kuma amintacce tare da sukurori masu hawa (ba a haɗa su ba) (Hoto 13c).

Shigar da Dutsen bango

1. A hankali sanya faceplate a kan LEDs, kuma amintacce ta amfani da sukurori guda uku (3) kwanon rufi (C) a sama da uku (3) skru na kwanon rufi (C) a ƙasan faceplate (Fig. 14a).
2. Sanya maƙallan hawa (A) a gefen hagu da dama na shingen tara (Fig. 14b). Yi amfani da skru guda uku (3) lebur na kai (B) don amintattun maƙallan hawa.
3. Dutsen taragon kuma amintacce tare da sukurori masu hawa (ba a haɗa su ba) (Hoto 14c)

Rack Mechanical Draing and Dimensions

Takardu / Albarkatu

Altronix Maximal1RHD Mai Kula da Wutar Lantarki [pdf] Manual mai amfani Maximal1RHD Mai Kula da Wutar Lantarki, Maximal1RHD, Mai Sarrafa Wuta, Mai Sarrafa Wuta

Magana

• Manual mai amfani