STMicroelectronics STM32Cube Wireless Industrial Node SensorTile Box

هارڊويئر ۽ سافٽ ويئر ختمview

هارڊويئر ختمview

1. Sampلاڳو ڪرڻ لاءِ موجود آهن:
2.  STEVAL-STWINBX1 STWIN.box – SensorTile Wireless Industrial Node Development Kit
3.  STEVAL-MKBOXPRO SensorTile.box-Pro multi-sensors and wireless connectivity development kit for any intelligent IoT node
4. STEVAL-STWINKT1B STWIN – SensorTile Wireless Industrial Node Development Kit

هارڊويئر ختمview (2/2)

• STWIN.box - سينسر ٽائل وائرليس انڊسٽريل نوڊ
• The STWIN.box (STEVAL-STWINBX1) is a development kit and reference design that simplifies prototyping and testing of advanced industrial sensing applications in IoT contexts such as condition monitoring and predictive maintenance.
• It is an evolution of the original STWIN kit (STEVAL-STWINKT1B) and features a higher mechanical accuracy in the measurement of vibrations, an improved robustness, an updated BoM to reflect the latest and best-in-class MCU and industrial sensors, and an easy-to-use interface for external add-ons.
• The STWIN.box kit consists of an STWIN.box core system, a 480mAh LiPo battery, an adapter for the ST-LINK debugger (STEVAL-MKIGIBV4), a plastic case, an adapter board for DIL 24 sensors and a flexible cable.

اهم خاصيتون

• Multi-sensing wireless platform for vibration monitoring and ultrasound detection
•  Built around STWIN.box core system board with processing, sensing, connectivity, and expansion capabilities
• Ultra-low power Arm® Cortex®-M33 with FPU and TrustZone at 160 MHz, 2048 kBytes Flash memory (STM32U585AI)
• MicroSD card slot for standalone data logging applications
• On-board Bluetooth® low energy v5.0 wireless technology (BlueNRG-M2), Wi-Fi (EMW3080) and NFC (ST25DV04K)
•  Wide range of industrial IoT sensors: Ultra-wide bandwidth (up to 6 kHz), low-noise, 3-axis digital vibration sensor (IIS3DWB), 3D accelerometer + 3D gyro iNEMO inertial measurement unit (ISM330DHCX) with Machine Learning Core, High-performance ultra-low-power 3-axis accelerometer for industrial applications (IIS2DLPC), Ultra-low power 3-axis magnetometer (IIS2MDC), Dual full-scale, 1.26 bar and 4 bar, absolute digital output barometer in full-mold package (ILPS22QS), Low-voltagاي، الٽرا لو پاور، 0.5°C جي درستگي I²C/SMBus 3.0 گرمي پد سينسر (STTS22H)، صنعتي گريڊ ڊجيٽل MEMS مائڪروفون (IMP34DT05)، اينالاگ MEMS مائڪروفون 80 kHz تائين فريڪوئنسي جواب سان (IMP23ABSU)
• Expandable via a 34-pin FPC connector
• تازه ترين معلومات دستياب آهي www.st.com/stwinbx1

هارڊويئر ختمview (2/2)

• STEVAL-STWINBX1 ڊولپمينٽ ڪٽ ۾ شامل آهن:
• The STEVAL-STWBXCS1 STWIN.box core system (main board)
• A plastic case with M3 bolts
• A 480 mAh 3.7 V LiPo battery
• The STEVAL-MKIGIBV4 ST-LINK adapter with programming cable
• The STEVAL-C34DIL24 adapter board for DIL24 sensors with the STEVAL-FLTCB01 flexible cable.

• هارڊويئر ختمview (1/2) 

SensorTile.box-Pro – multi-sensors and wireless connectivity development kit for any intelligent IoT node.

• The SensorTile.box-Pro (STEVAL-MKBOXPRO) s the new ready-to-use programmable wireless box kit for developing any IoT application based on remote data gathering and evaluation, exploit the full kit potential by leveraging both motion and environmental data sensing, along with a digital microphone, and enhance the connectivity and smartness of whatever environment you find yourself into.
•  The SensorTile.box-Pro kit consists of a SensorTile.box-Pro core system, a 480mAh LiPo battery, an adapter for the ST-LINK debugger (STEVAL-MKIGIBV4), a plastic case, QVAR electrodes, Wireless charger receiver circuit and a flexible cable.

اهم خاصيتون

• Ultra -low-power with FPU Arm-Cortex-M33 with TrustZone® microcontroller (STM32U585AI)
• High precision sensors to gather high-quality data: low-voltage local digital temperature sensor (STTS22H), six-axis inertial measurement unit (LSM6DSV16X), three-axis low-power accelerometer (LIS2DU12), 3-axis magnetometer (LIS2MDL), pressure sensor (LPS22DF) and digital microphone/audio sensor (MP23DB01HP)
• HW power switch, 4 programmable status LEDs (green, red, orange, blue), 2 programmable push-buttons, audio buzzer–Reset button, qvar with electrodes for user interface experience
• Interface for J-Link/SWD debug-probe, Interface for extension board and socket for DIL24 sensor adapters
• Connectivity: microSD card slot, Bluetooth® Low Energy 5.2 (BlueNRG 355AC), NFC tag (ST25DV04K)
• Power and charging options: USB Type-C® charging and connecting, 5 W wireless charging and 480 mAh battery
• تازه ترين معلومات دستياب آهي www. https://www.st.com/en/evaluation-tools/stevalmkboxpro.html

هارڊويئر ختمview (2/2)

• STEVAL-MKBOXPRO ڊولپمينٽ ڪٽ ۾ شامل آهن:
• The SensorTile.Box Pro (main board)
•  a plastic case with M2.5 screws
• a 480 mAh 3.7 V LiPo battery
• Qvar electrodes
• wireless charger receiver circuit
• programmable NFC tag
• microSD ڪارڊ
• STEVAL-MKIGIBV4 STLINK adapter with programming cable

سافٽ ويئر ختمview

• FP-SNS-STAIOTCFT سافٽ ويئر جي وضاحت
• FP-SNS-STAIOTCFT هڪ STM32Cube فنڪشن پيڪ آهي جيڪو استعمال ڪرڻ لاءِ ٺاهيو ويو آهي Web ايس ٽي اي آءِ او ٽي ڪرافٽ ايپليڪيشن.
• هن فنڪشنل پيڪ جو مقصد سادي ايپليڪيشنون مهيا ڪرڻ آهي جيڪي ڏيکارين ٿيون ته STEVAL-MKBOXPRO، STEVAL-STWINBX1 ۽ STEVAL-STWINKT1B بورڊن لاءِ ڪسٽم ايپليڪيشنون ڪيئن ٺاهيون وڃن.
• توسيع STM32Cube سافٽ ويئر ٽيڪنالاجي تي ٺهيل آهي مختلف STM32 مائڪرو ڪنٽرولرز ۾ پورٽبلٽي کي آسان ڪرڻ لاءِ.

اهم خاصيتون

• Complete applications on how to use:
• AI algorithms on MCU, MLC and ISPU
• Using PnPL protocol to communicate and sending commands/telemetries/properites
• Using USB serial communication to display the inference results
• Exploiting already existing X-CUBE-MEMS1/ISPU to target the different sensors
• Exploiting the X-CUBE-AI to import a chosen neural network
• مختلف MCU خاندانن ۾ آسان پوربلٽي، STM32Cube جي مهرباني
• مفت، صارف دوست لائسنس جا شرط.
• تازه ترين معلومات دستياب آهي www.st.com ايف پي-ايس اين ايس-ايس ٽي اي او ٽي سي ايف ٽي

سيٽ اپ ۽ ڊيمو ايپليڪيشنون

Software and Other Prerequisites

ايف پي-ايس اين ايس-ايس ٽي اي او ٽي سي ايف ٽي
نقل ڪريو .zip file توهان جي PC تي هڪ فولڊر ۾ مواد. پيڪيج ۾ سورس ڪوڊ هوندو example (Keil, IAR, STM32Cube IDE) based on STEVAL-STWINKT1B, STEVAL-STWINBX1 and STEVAL-MKBOXPRO.

سيٽ اپ ختمview

STEVAL-STWINKT1B لاءِ HW جون شرطون ۽ سيٽ اپ

• 1x STEVAL-STWINKT1B evaluation board
• Laptop/PC with Windows 10, 11
• 2 x microUSB cable
• 1x ST-LINK-V3SET (or ST-LINK-V3MINI) debugger/programmer

STEVAL-STWINBX1 لاءِ HW جون شرطون ۽ سيٽ اپ

• 1x STEVAL-STWINBX1 evaluation board
• Laptop/PC with Windows 10, 11
• 1 x microUSB cable
• 1x type-C USB cable
• 1x ST-LINK-V3SET (or ST-LINK-V3MINI) debugger/programmer

STEVAL-MKBOXPRO لاءِ HW جون شرطون ۽ سيٽ اپ

• 1x STEVAL-MKBOXPRO evaluation board
• Laptop/PC with Windows 10, 11
• 1 x microUSB cable
• 1x type-C USB cable
• 1x ST-LINK-V3SET (or ST-LINK-V3MINI) debugger/programmer

صرف چند منٽن ۾ ڪوڊنگ شروع ڪريو

www.st.com/stm32ode

STEVAL-MKBOXPRO لاءِ مسئلو حل ڪرڻ

جڏهن بورڊ شروع ٿئي ٿو، سڀني لاءِ اڳوڻيamples, the board will use the Orange LED for showing that everything is well initialized and it’s working.

Demo Applications: AI Inertial

ايف پي-ايس اين ايس-ايس ٽي آءِ او ٽي سي ايف ٽي (اي آءِ انرٽيل)

STEVAL-MKBOXPRO – STWINKT1B – STWINBX1

The purpose of this application is to show an inference application on the Machine Learning Core and on MCU, ISPU.  For all the development boards the application starts streaming directly results regarding a classification of an Asset Tracking Scenario, but in principle any MLC application can be used by simply loading a new configuration by means of a specific PnPL command The Smart Asset Tracking scenario is the same displayed in the Portal of ST AIoT Craft.

دستاويز ۽ لاڳاپيل وسيلا

سڀئي دستاويز لاڳاپيل مصنوعات جي ڊيزائن ٽيب ۾ موجود آهن webصفحو

• FP-SNS-STBOX1:
• DB: STM32Cube function pack – databrief
• UM: Getting started with the STM32Cube function pack – user manual
• سافٽ ويئر سيٽ اپ file

STM32 اوپن ڊولپمينٽ ماحول

مٿانview

STM32 اوپن ڊولپمينٽ ماحول تيز، سستو پروٽوٽائپنگ ۽ ڊولپمينٽ

The STM32 Open Development Environment (STM32 ODE) is an open, flexible, easy, and affordable way to develop innovative devices and applications based on the STM32 32-bit microcontroller family combined with other state-of-the-art ST components connected via expansion boards. It enables fast prototyping with leading-edge components that can quickly be transformed into final designs.

وڌيڪ معلومات لاء، مهرباني ڪري دورو ڪريو www.st.com/stm32ode

تنهنجي مهرباني

© STMicroelectronics - سڀ حق محفوظ آهن.
The STMicroelectronics corporate logo is a registered trademark of the STMicroelectronics group of companies. All other names are the property of their respective owners.

سوالن جا جواب

سوال: FP-SNS-STAIOTCFT جون اهم خاصيتون ڇا آهن؟

A: The FP-SNS-STAIOTCFT provides simple applications for custom development on specific boards and is built on STM32Cube software technology for portability.

سوال: هارڊويئر ۽ سافٽ ويئر جي ضرورتن بابت وڌيڪ معلومات ڪٿان ملي سگهي ٿي؟

A: Detailed information about the hardware and software prerequisites can be found in the setup overview استعمال ڪندڙ مينوئل جو سيڪشن.

سوال: مان FP-SNS-STAIOTCFT استعمال ڪندي ڪوڊنگ ڪيئن شروع ڪريان؟

A: To start coding with the FP-SNS-STAIOTCFT, follow the setup instructions provided in the user manual and refer to the package structure documentation for guidance.

دستاويز / وسيلا

STMicroelectronics STM32Cube Wireless Industrial Node SensorTile Box [pdf] استعمال ڪندڙ ھدايت STM32Cube, STM32Cube Wireless Industrial Node SensorTile Box, Wireless Industrial Node SensorTile Box, Industrial Node SensorTile Box, SensorTile Box

حوالو

• استعمال ڪندڙ دستي