STMicroelectronics STM32Cube Wireless Industrial Node SensorTile Box
Maquinari i programari acabatsview
S'ha acabat el maquinariview
- SampLes implementacions estan disponibles per a:
- STEVAL-STWINBX1 STWIN.box – SensorTile Wireless Industrial Node Development Kit
- STEVAL-MKBOXPRO SensorTile.box-Pro multi-sensors and wireless connectivity development kit for any intelligent IoT node
- STEVAL-STWINKT1B STWIN – SensorTile Wireless Industrial Node Development Kit
S'ha acabat el maquinariview (2/2)
- STWIN.box – Node industrial sense fil SensorTile
- The STWIN.box (STEVAL-STWINBX1) is a development kit and reference design that simplifies prototyping and testing of advanced industrial sensing applications in IoT contexts such as condition monitoring and predictive maintenance.
- It is an evolution of the original STWIN kit (STEVAL-STWINKT1B) and features a higher mechanical accuracy in the measurement of vibrations, an improved robustness, an updated BoM to reflect the latest and best-in-class MCU and industrial sensors, and an easy-to-use interface for external add-ons.
- The STWIN.box kit consists of an STWIN.box core system, a 480mAh LiPo battery, an adapter for the ST-LINK debugger (STEVAL-MKIGIBV4), a plastic case, an adapter board for DIL 24 sensors and a flexible cable.
Característiques clau
- Multi-sensing wireless platform for vibration monitoring and ultrasound detection
- Built around STWIN.box core system board with processing, sensing, connectivity, and expansion capabilities
- Ultra-low power Arm® Cortex®-M33 with FPU and TrustZone at 160 MHz, 2048 kBytes Flash memory (STM32U585AI)
- MicroSD card slot for standalone data logging applications
- On-board Bluetooth® low energy v5.0 wireless technology (BlueNRG-M2), Wi-Fi (EMW3080) and NFC (ST25DV04K)
- Wide range of industrial IoT sensors: Ultra-wide bandwidth (up to 6 kHz), low-noise, 3-axis digital vibration sensor (IIS3DWB), 3D accelerometer + 3D gyro iNEMO inertial measurement unit (ISM330DHCX) with Machine Learning Core, High-performance ultra-low-power 3-axis accelerometer for industrial applications (IIS2DLPC), Ultra-low power 3-axis magnetometer (IIS2MDC), Dual full-scale, 1.26 bar and 4 bar, absolute digital output barometer in full-mold package (ILPS22QS), Low-voltage, sensor de temperatura I²C/SMBus 0.5 de consum ultrabaix i precisió de 3.0 °C (STTS22H), micròfon MEMS digital de grau industrial (IMP34DT05), micròfon MEMS analògic amb resposta de freqüència de fins a 80 kHz (IMP23ABSU)
- Expandable via a 34-pin FPC connector
- Darrera informació disponible a www.st.com/stwinbx1
S'ha acabat el maquinariview (2/2)
- El kit de desenvolupament STEVAL-STWINBX1 inclou:
- The STEVAL-STWBXCS1 STWIN.box core system (main board)
- A plastic case with M3 bolts
- A 480 mAh 3.7 V LiPo battery
- The STEVAL-MKIGIBV4 ST-LINK adapter with programming cable
- The STEVAL-C34DIL24 adapter board for DIL24 sensors with the STEVAL-FLTCB01 flexible cable.
- S'ha acabat el maquinariview (1/2)
SensorTile.box-Pro – multi-sensors and wireless connectivity development kit for any intelligent IoT node.
- The SensorTile.box-Pro (STEVAL-MKBOXPRO) s the new ready-to-use programmable wireless box kit for developing any IoT application based on remote data gathering and evaluation, exploit the full kit potential by leveraging both motion and environmental data sensing, along with a digital microphone, and enhance the connectivity and smartness of whatever environment you find yourself into.
- The SensorTile.box-Pro kit consists of a SensorTile.box-Pro core system, a 480mAh LiPo battery, an adapter for the ST-LINK debugger (STEVAL-MKIGIBV4), a plastic case, QVAR electrodes, Wireless charger receiver circuit and a flexible cable.
Característiques clau
- Ultra -low-power with FPU Arm-Cortex-M33 with TrustZone® microcontroller (STM32U585AI)
- High precision sensors to gather high-quality data: low-voltage local digital temperature sensor (STTS22H), six-axis inertial measurement unit (LSM6DSV16X), three-axis low-power accelerometer (LIS2DU12), 3-axis magnetometer (LIS2MDL), pressure sensor (LPS22DF) and digital microphone/audio sensor (MP23DB01HP)
- HW power switch, 4 programmable status LEDs (green, red, orange, blue), 2 programmable push-buttons, audio buzzer–Reset button, qvar with electrodes for user interface experience
- Interface for J-Link/SWD debug-probe, Interface for extension board and socket for DIL24 sensor adapters
- Connectivity: microSD card slot, Bluetooth® Low Energy 5.2 (BlueNRG 355AC), NFC tag (ST25DV04K)
- Power and charging options: USB Type-C® charging and connecting, 5 W wireless charging and 480 mAh battery
- Darrera informació disponible a www. https://www.st.com/en/evaluation-tools/stevalmkboxpro.html
S'ha acabat el maquinariview (2/2)
- El kit de desenvolupament STEVAL-MKBOXPRO inclou:
- The SensorTile.Box Pro (main board)
- a plastic case with M2.5 screws
- a 480 mAh 3.7 V LiPo battery
- Qvar electrodes
- wireless charger receiver circuit
- programmable NFC tag
- targeta microSD
- STEVAL-MKIGIBV4 STLINK adapter with programming cable
S'ha acabat el programariview
- Descripció del programari FP-SNS-STAIOTCFT
- El FP-SNS-STAIOTCFT és un paquet de funcions STM32Cube dissenyat per ser utilitzat juntament amb el Web aplicació ST AIoT Craft.
- L'objectiu d'aquest paquet funcional és proporcionar aplicacions senzilles que mostrin com crear aplicacions personalitzades per a plaques STEVAL-MKBOXPRO, STEVAL-STWINBX1 i STEVAL-STWINKT1B.
- L'expansió es basa en la tecnologia de programari STM32Cube per facilitar la portabilitat entre diferents microcontroladors STM32.
Característiques clau
- Complete applications on how to use:
- AI algorithms on MCU, MLC and ISPU
- Using PnPL protocol to communicate and sending commands/telemetries/properites
- Using USB serial communication to display the inference results
- Exploiting already existing X-CUBE-MEMS1/ISPU to target the different sensors
- Exploiting the X-CUBE-AI to import a chosen neural network
- Fàcil portabilitat entre diferents famílies de MCU, gràcies a STM32Cube
- Condicions de llicència gratuïtes i fàcils d'utilitzar.
- Darrera informació disponible a www.st.com FP-SNS-STAIOTCFT
Aplicacions de configuració i demostració
Programari i altres requisits previs
FP-SNS-STAIOTCFT
Copieu el fitxer .zip file contingut en una carpeta del vostre ordinador. El paquet contindrà el codi font, per exempleample (Keil, IAR, STM32Cube IDE) based on STEVAL-STWINKT1B, STEVAL-STWINBX1 and STEVAL-MKBOXPRO.
Configuració finalitzadaview
Requisits previs de maquinari i configuració per a STEVAL-STWINKT1B
- 1x STEVAL-STWINKT1B evaluation board
- Laptop/PC with Windows 10, 11
- 2 x microUSB cable
- 1x ST-LINK-V3SET (or ST-LINK-V3MINI) debugger/programmer
Requisits previs de maquinari i configuració per a STEVAL-STWINBX1
- 1x STEVAL-STWINBX1 evaluation board
- Laptop/PC with Windows 10, 11
- 1 x microUSB cable
- 1x type-C USB cable
- 1x ST-LINK-V3SET (or ST-LINK-V3MINI) debugger/programmer
Requisits previs de maquinari i configuració per a STEVAL-MKBOXPRO
- 1x STEVAL-MKBOXPRO evaluation board
- Laptop/PC with Windows 10, 11
- 1 x microUSB cable
- 1x type-C USB cable
- 1x ST-LINK-V3SET (or ST-LINK-V3MINI) debugger/programmer
Comenceu a codificar en pocs minuts
Resolució de problemes per a STEVAL-MKBOXPRO
Quan el tauler comença, per a tots els examples, the board will use the Orange LED for showing that everything is well initialized and it’s working.
Demo Applications: AI Inertial
FP-SNS-STAIOTCFT (IA inercial)
STEVAL-MKBOXPRO – STWINKT1B – STWINBX1
The purpose of this application is to show an inference application on the Machine Learning Core and on MCU, ISPU. For all the development boards the application starts streaming directly results regarding a classification of an Asset Tracking Scenario, but in principle any MLC application can be used by simply loading a new configuration by means of a specific PnPL command The Smart Asset Tracking scenario is the same displayed in the Portal of ST AIoT Craft.
Tots els documents estan disponibles a la pestanya DISSENY dels productes relacionats webpàgina
- FP-SNS-STBOX1:
- DB: STM32Cube function pack – databrief
- UM: Getting started with the STM32Cube function pack – user manual
- Configuració del programari file
Entorn de desenvolupament obert STM32
Acabatview
Entorn de desenvolupament obert STM32 Prototipació i desenvolupament ràpids i assequibles
The STM32 Open Development Environment (STM32 ODE) is an open, flexible, easy, and affordable way to develop innovative devices and applications based on the STM32 32-bit microcontroller family combined with other state-of-the-art ST components connected via expansion boards. It enables fast prototyping with leading-edge components that can quickly be transformed into final designs.
Per a més informació, visiteu www.st.com/stm32ode
Gràcies
© STMicroelectronics – Tots els drets reservats.
El logotip corporatiu de STMicroelectronics és una marca registrada del grup d'empreses STMicroelectronics. Tots els altres noms són propietat dels seus respectius propietaris.
PMF
P: Quines són les característiques principals de l'FP-SNS-STAIOTCFT?
A: The FP-SNS-STAIOTCFT provides simple applications for custom development on specific boards and is built on STM32Cube software technology for portability.
P: On puc trobar més informació sobre els requisits previs de maquinari i programari?
A: Detailed information about the hardware and software prerequisites can be found in the setup overview secció del manual d'usuari.
P: Com puc començar a programar amb FP-SNS-STAIOTCFT?
A: To start coding with the FP-SNS-STAIOTCFT, follow the setup instructions provided in the user manual and refer to the package structure documentation for guidance.
Documents/Recursos
 |
STMicroelectronics STM32Cube Wireless Industrial Node SensorTile Box [pdfGuia de l'usuari STM32Cube, STM32Cube Wireless Industrial Node SensorTile Box, Wireless Industrial Node SensorTile Box, Industrial Node SensorTile Box, SensorTile Box |